2. Configure Yealink IP Phone

 Contents
1. Requirements and Preparation ....................................................................................................3 2. Configure Yealink IP Phone.........................................................................................................3 2.1
Login to WEB management..........................................................................................................3 2.2
Configure the Account Settings ....................................................................................................4 2.3
Configure the DSS Key as BLF ....................................................................................................5 2.4
Configure the DSS Key as Call Park ............................................................................................6 2.5
Configure the DSS Key as Intercom .............................................................................................7 3. Auto-configure Yealink Phone ......................................................................................................7 4. Configure 3CX..............................................................................................................................8 4.1
Login to 3CX.................................................................................................................................8 4.2
Configure an Extension on 3CX ...................................................................................................8 Appendix ..........................................................................................................................................9 1. Default Basic Dial Code on 3CX System .......................................................................................9 2. Other recommended settings...........................................................................................................9 Reference ........................................................................................................................................10 ___________________________________________________________________________________________________________
YEALINK IP PHONE INTEROPERABILITY CONFIGURATION GUIDE
COPYRIGHT © 2001-2009 YEALINK NETWORK TECHNOLOGY CO.,LTD
PAGE 2 OF 10
1. Requirements and Preparation
z
Software image v8.0.9532.468 or higher running on 3CX Phone System.
z
Software image x.42.x.x or higher running on the Yealink IP Phone.
2. Configure Yealink IP Phone
2.1
Login to WEB management
Press the OK button
IP address
Login using Default
User name/Password:
admin / admin
___________________________________________________________________________________________________________
YEALINK IP PHONE INTEROPERABILITY CONFIGURATION GUIDE
COPYRIGHT © 2001-2009 YEALINK NETWORK TECHNOLOGY CO.,LTD
PAGE 3 OF 10
2.2
Configure the Account Settings
① Select “Account”
② Select one Account
③ Active Account
④ Fill in these fields
check Note
⑤ Voicemail code
After entering the above settings, Account1will be available to make calls.
Note : If the SIP server is behind a NAT, you should enable “NAT Traversal” as “STUN” and
then specify a STUN Server. For more details about STUN, please refer to
http://www.voip-info.org/wiki/view/STUN. To learn about NAT, you should refer to
http://www.voip-info.org/wiki/view/NAT+and+VOIP
___________________________________________________________________________________________________________
YEALINK IP PHONE INTEROPERABILITY CONFIGURATION GUIDE
COPYRIGHT © 2001-2009 YEALINK NETWORK TECHNOLOGY CO.,LTD
PAGE 4 OF 10
2.3
Configure the DSS Key as BLF
① Select “Phone”
② Select “DSS Key”
③ Select “BLF”
④ Select the
right line
⑥ Pickup code
⑤ Extension
number
After entering the above settings, DSS Key1 is ready as BLF for Line 1, monitoring Extension
101. When there’s an incoming call on 101, DSS Key1 will flash red and you can directly
press it to pick up the call.
___________________________________________________________________________________________________________
YEALINK IP PHONE INTEROPERABILITY CONFIGURATION GUIDE
COPYRIGHT © 2001-2009 YEALINK NETWORK TECHNOLOGY CO.,LTD
PAGE 5 OF 10
2.4
Configure the DSS Key as Call Park
① Select “Phone”
② Select “DSS Key”
③ Select “KeyEvent”
④ Select
“Call Park”
⑤ Select the
right line
⑥ Park code +
parking orbit
After entering the above settings, DSS Key2 is ready as Call Park for Line1.
An active call can be parked on orbit 0 by pressing DSS Key2 during your conversation.
___________________________________________________________________________________________________________
YEALINK IP PHONE INTEROPERABILITY CONFIGURATION GUIDE
COPYRIGHT © 2001-2009 YEALINK NETWORK TECHNOLOGY CO.,LTD
PAGE 6 OF 10
2.5
Configure the DSS Key as Intercom
① Select “Phone”
② Select “DSS Key”
③ Select “Intercom”
④ Select the
right line
⑤ Intercom code
+ extension
After entering the above settings, DSS Key3 will work as an Intercom key with extension 101.
3. Auto-configure Yealink Phone
Please refer to Yealink Document Auto Provision Manual:
http://www.yealink.com/fae/Auto Provision Manual.rar
___________________________________________________________________________________________________________
YEALINK IP PHONE INTEROPERABILITY CONFIGURATION GUIDE
COPYRIGHT © 2001-2009 YEALINK NETWORK TECHNOLOGY CO.,LTD
PAGE 7 OF 10
4. Configure 3CX
4.1
Login to 3CX
Default User Name/Password:
admin / admin
4.2
Configure an Extension on 3CX
4.2.1 Add an extension
① Select “Add Extension”
② Extension Number
③ Authentication
ID/Password
④ PIN for Voice Mail
Apply your settings and account 100 is established.
___________________________________________________________________________________________________________
YEALINK IP PHONE INTEROPERABILITY CONFIGURATION GUIDE
COPYRIGHT © 2001-2009 YEALINK NETWORK TECHNOLOGY CO.,LTD
PAGE 8 OF 10
Appendix
1. Default Basic Dial Code on 3CX System
Voice Mail(VMail)
Call Park
Callpark Retrieve
Intercom
*4
*0 + parking orbit
*1 + parking orbit
*9
2. Other recommended settings
(1) Since semi-attended transfer is not supported on 3CX, to disable semi-attended transfer on Yealink
phones is recommended:
① Select “Phone”
② Select “Features”
③ Select “Disabled”
___________________________________________________________________________________________________________
YEALINK IP PHONE INTEROPERABILITY CONFIGURATION GUIDE
COPYRIGHT © 2001-2009 YEALINK NETWORK TECHNOLOGY CO.,LTD
PAGE 9 OF 10
Reference
‹
‹
www.3CX.com
www.yealink.com
___________________________________________________________________________________________________________
YEALINK IP PHONE INTEROPERABILITY CONFIGURATION GUIDE
COPYRIGHT © 2001-2009 YEALINK NETWORK TECHNOLOGY CO.,LTD
PAGE 10 OF 10
Open as PDF
Similar pages