Cold Jet AeRO 30
At last! A performance driven
single-hose Dry Ice Blast system
without the cost — the AeRO 30!
With the new AeRO 30, dry ice blast
cleaning is finally fast, easy and
affordable!
This new, lightweight, compact and
powerful system can accelerate your
cleaning time and stretch your
maintenance dollars by consuming
less than half the ice and compressed
air of dual-hose blast systems.
The AeRO 30 incorporates the
superior performance of single-hose
blast technolgoy creating the perfect
machine for short runs or periodic
cleaning needs.
Unique Features:
• Possesses convenient, intuitive and ergonomic controls
and size for simple operation and maintenance.
• Saves time by cleaning faster.
• Saves money by consuming less ice and air.
• Works with the industry's largest selection of interchangeable nozzles - Cold Jet will
accommodate your every need.
• Performs in a wide range of applications from the most sensitive to the toughest areas.
455 Wards Corner Road, Loveland, Ohio 45140 USA • www.coldjet.com •
+1-800-337-9423
+1-513-831-3211
Cold Jet AeRO 30 Complete Features List
Cold Jet dry ice blasting is the fast,
Hose hanging devices
keep hoses safely
stored on machine
easy and cost-effective cleaning
method that uses high-velocity dry ice
pellets to clean surfaces without damaging
equipment or creating new waste streams.
Cold Jetting eliminates the need for labor intensive manual scrubbing and caustic
chemicals by removing residues from
they are hot, energized and in place.
Separate handles
ideally positioned
for rolling and
manoeuvering
VERSATILE
PORTABLE
production fixtures and other surfaces while
• Fixed 'dry ice pellet feed rate’ maximizes performance and
minimizes waste
• Patented isolated hopper supports media flow while reducing
vibration and noise
• Hopper lid’s lift design opens for easy filling of ice, and sliding
screen design with safety interlock switch disables machine, when
open, to protect operator from contact with moving parts
• 30 lb (13.6 kg) hopper allows for just the right amount of pellets for
most jobs
• Blast system includes one length each of blast and air hose, as well
as customer-specified applicator and nozzle (with appropriate
handle)
SAFE
• Completely enclosed shell and hopper grid prevent contact with
moving parts
• Air bleed valve adjacent to air connection ensures safe air supply
disconnection
• Grounding cable for static field control
• Safety interlock switch disables machine when accessing inside of
hopper to remove unused or aged ice and/or foreign material
EASY TO USE
• Controls are simple, easy to reach and to use
• Vibrator agitated hopper prevents media from solidifying at throat
Nozzle hanging
devices keep nozzles
safely stored on
machine
• Smaller, 17” (43.2 cm) width permits use in narrow aisles
• Foot operated brake/swivel lock on front casters
• Hose and nozzle hanging devices keep air and blast hoses as well as
nozzles stored for transit without disconnection from unit
• Separate handles ideally located for rolling and manoeuvering
OPTIONS
• Externally mounted blast pressure regulator
• Externally mounted coalescing air filter
• 3 lb/min (1.36 kg/min) rotor
SPECIFICATIONS
• Fully isolated hopper -30 lb (13.6 kg) capacity
• Hose and nozzle management devices
• Fixed feed rate -1.5 lb/min (0.7 kg/min)
• Low pressure system - to 140 PSI (9.7 bar)
• Weight - 165 lbs (75 kg)
• Size (L x W x H) - 25” x 17” x 30” (63.5 cm x 43.2 cm x 76.2 cm)
• Power requirements:
•100-140 VAC, 1 PH, (50/60 Hz), 9 amps, or
•200-240 VAC, 1 PH, (50/60 Hz), 4.3 amps
• 12 month warranty
455 Wards Corner Road, Loveland, Ohio 45140 USA • www.coldjet.com •
+1-800-337-9423
+1-513-831-3211
Open as PDF
Similar pages