WP-110
Active Wall Plate - Computer Graphics Video Transmitter
The WP-110 is a wall plate transmitter for
computer graphics video signals with
resolutions up to and exceeding UXGA. It
converts a computer graphics video signal
into a twisted pair signal that it transmits to
the TP-120 receiver or other compatible
Kramer receiver.
Available in Gray, White & Off-White
FEATURES
Resolution - Up to UXGA
HDTV Compatible
Power Connect™ System - Only one unit in a system, the transmitter or the receiver needs to be connected to a
power source. All the system units must have the Power Connect system to use this feature.
Advanced Sync Processing - Ensures compatibility with a wide range of computers.
Front Panel Connections - 15-pin HD input
Rear Panel Connections - RJ-45 output
Selectable Sync Input Impedance - 75 Ώ (analog) or 510 Ώ (TTL)
System Range - Up to 100 meters (320’)
Cable - UTP (unshielded twisted pair) such as CAT 5.
Dimensions - 6.9cm x 4.1cm x 11.4cm (2.71" x 1.63" x 4.49") US; 8.6cm x 4.1cm x 8.6cm (3.39" x 1.63" x 3.39") and
8cm x 4.1cm x 8cm (3.15" x 1.63" x 3.15") EU W, D, H.
Optional - RK−121WP 19" rack adapter (for EU size wall plates only).
WP-110
TECHNICAL SPECIFICATIONS
INPUTS:
OUTPUTS:
BANDWIDTH (-3DB):
DIFF. GAIN:
DIFF. PHASE:
K-FACTOR:
S/N RATIO:
COUPLING:
POWER SOURCE:
OPTIONS:
ACCESSORIES:
PRODUCT DIMENSIONS:
PRODUCT WEIGHT:
SHIPPING DIMENSIONS:
SHIPPING WEIGHT:
1 VGA / UXGA on an HD15 connector
1 RJ 45 LINE OUT connector
>150MHz, Fully Loaded
2.9% (worst case)
0.3 Deg (worst case)
<0.05%
69dB (worst case)
AC
12 VDC 60mA
RK−121WP 19" rack adapter.
Power supply
8.00cm x 3.60cm x 8.00cm (3.15" x 1.42" x 3.15" ) W, D, H
0.1kg (0.2lbs) approx.
8.00cm x 10.00cm x 5.80cm (3.15" x 3.94" x 2.28" ) W, D, H
0.4kg (0.8lbs) approx.
Open as PDF
Similar pages