SMVector frequency inverter: Remote Keypad Installation of Keypad

RKV01D-e2
SMVector frequency inverter: Remote Keypad
The Remote Keypad option ESVZXK1 can only be used with SMVector Series Drives. The Remote Keypad allows operation
of the drive from a remote location up to 100 ft (30 meters) from the drive. The Remote keypad is configured using Parameter
P100 and duplicates the functionality of the drive’s local keypad as described in the SMVector Users Manual (SV01).
WARNING!
Improper wiring may result in damage to the
Remote Keypad. Keep the remote keypad
cable away from power wiring. Use Belden
8332, General Cable C0620, or equivalent
wire only with a minimum 300V jacket
insulation.
3.40 in
(86 mm)
The specified cables consist of two twisted
pairs. Make sure one twisted pair is used
for power and the other is used for serial
communications. Do not mix connections
between twisted pairs.
2.20 in
(56 mm)
0.72 in
(18 mm)
Installation of Keypad
UP
1/8 in Dia
(3.2 mm)
1.32 in
(33 mm)
1.57 in
(40 mm)
1.5 in Dia
(38 mm)
1/8 in Dia
(3.2 mm)
DANGER!
•
Disconnect power and wait 3 minutes
before removing terminal cover.
•
Close all protective covers and doors
before and during operation.
Lenze - AC Tech • 630 Douglas Street • Uxbridge MA 01569 • USA • Sales (800) 217-9100 • Service (508) 278 9100 • www.lenze-actech.com
Installation of Keypad Interface - SMV NEMA 1
0.5 Nm/ 4.5 lb-in
1 2 3 4 5
<
_ 1.5 mm2
(16-26 AWG)
7mm
0.2 Nm/ 2 lb-in
<
_ 1.5 mm2
(16-26 AWG)
6 mm
Wiring Connections (NEMA 1, 4X)
Module Terminal Description
1
2
3
4
5
Keypad Terminal
Keypad Power (-)
Communication (TXA)
No Connection
Communication (TXB)
Keypad Power (+)
2
TXA
-TXB
11
DANGER!
• Disconnect power and wait 3
minutes before removing terminal
cover.
• Close all protective covers and
doors before & during operation.
NOTE
1.
2.
3.
Set parameter P400 = 01.
Set parameter P100 for desired functionality.
To use the remote keypad RUN button the digital input start/stop (terminal #1) on the SMV control terminal block must be asserted.
Installation of Keypad Interface - SMV NEMA 4X
0.5 Nm/ 4.5 lb-in
1 2 3 4 5
<
_ 1.5 mm2
(16-26 AWG)
7mm
0.2 Nm/ 2 lb-in
<
_ 1.5 mm2
(16-26 AWG)
6 mm
Lenze - AC Tech • 630 Douglas Street • Uxbridge MA 01569 • USA • Sales (800) 217-9100 • Service (508) 278 9100 • www.lenze-actech.com
Open as PDF
Similar pages