LYNSTEAD CEILING FAN VENTILADOR DE TECHO LYNSTEAD

ARTÍCULO #0357400
ITEM #0357400
VENTILADOR DE TECHO
LYNSTEAD
LYNSTEAD
CEILING FAN
MODELO #00872
MODEL #00872
MODELO UL #LSD52
Harbor Breeze ® es una marca registrada de LF,
LLC. Todos los derechos reservados.
UL MODEL #LSD52
Harbor Breeze ® is a registered trademark of LF,
LLC. All Rights Reserved.
Español p. 14
ADJUNTE SU RECIBO AQUÍ
Número de serie
ATTACH YOUR RECEIPT HERE
Fecha de compra
Serial Number
¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro
Departamento de Servicio al Cliente al 1-800-643-0067, de lunes a jueves de 8 a.m. a 6 p.m.,
hora estándar del Este, o los viernes de 8 a.m. a 5 p.m., hora estándar del Este.
Lowes.com/harborbreeze
14
Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. 5 p.m., EST, Friday.
EB 14188
Lowes.com/harborbreeze
1
TABLE OF CONTENTS
SAFETY INFORMATION
Safety Information............................................................................................................... 3
Package Contents............................................................................................................... 4
Hardware Contents.............................................................................................................. 5
Preparation.......................................................................................................................... 5
Assembly Instructions......................................................................................................... 6
Operating Instructions.......................................................................................................... 12
Care and Maintenance........................................................................................................ 12
READ AND SAVE THESE INSTRU CTIONS
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
• When using an existing outlet box, be sure the box is securely attached to the building structure
and can support the full weight of the fan, so as to avoid potential serious injury or death.
• All wiring must be in accordance with the National Electrical Code “ANSI/NFPA 70-1999” and local
electrical codes. Electrical installation should be performed by a qualified licensed electrician.
• Electrical diagrams are for reference only.
• Do not use bulbs that have a wattage greater than the maximum value stated on the fixture and in
this manual. Using a higher wattage bulb than specified will increase fixture temperature and cause
risk of fire. Disconnect the electrical supply circuit to the fan before installing light kit.
• The net weight of this fan including the light kit is 24.86 lbs.
Troubleshooting................................................................................................................... 12
Warranty.............................................................................................................................. 13
Replacement Parts List .................................................................................................... 13
WARNING
• ELECTRIC SHOCK HAZARD - To reduce the risk of electric shock, do not use this fan with any
solid-state speed control device.
• ELECTRIC SHOCK HAZARD - To reduce the risk of electric shock, make sure electricity has been
turned off at the circuit breaker or fuse box before beginning installation.
• PERSONAL INJURY HAZARD - To reduce the risk of injury to persons, install fan so that the blade
• FIRE, ELECTRIC SHOCK OR PERSONAL INJURY HAZARD shock or personal injury, mount to outlet box marked “ACCEPTABLE FOR FAN SUPPORT OF 35
LBS OR LESS” and use mounting screws provided with the outlet box. Most outlet boxes commonly
• PERSONAL INJURY HAZARD - Reduce the risk of personal injury, do not bend the blade brackets
when installing the brackets, balancing the blades or cleaning the fan. Do not insert foreign objects
in between rotating fan blades.
Lowes.com/harborbreeze
2
Lowes.com/harborbreeze
3
PACKAGE CONTENTS
HARDWARE CONTENTS (shown actual size)
A
F
AA
G
Wire Connector
Qty. 4
B
CC
DD
Fan Pull Chain
Extension
Qty. 1
Light Pull Chain
Extension
Qty. 1
BB
Lock Nut
Qty. 3
H
C
I
D
J
FF
K
E
Blade Screw
Qty. 16
L
PART
A
B
C
D
E
F
G
H
I
J
K
L
EE
DESCRIPTION
Mounting Plate
Motor
Switch Housing Plate (preassembled to Motor (B))
Motor Housing
Blade Bracket
Blade
Switch Housing
Light Kit
Glass Bowl
Bowl Cap (preassembled to Light Kit (H))
Finial (preassembled to Light Kit (H))
Bulb
QUANTITY
1
1
1
1
5
5
1
1
1
1
1
3
Blade Bracket Screw
with Washer
Qty. 11
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 45 minutes
Tools Required for Assembly (not included): Phillips screwdriver, step ladder, electrical tape, pliers,
wire cutters, wire strippers.
Lowes.com/harborbreeze
4
Lowes.com/harborbreeze
5
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
1. Securely attach the mounting plate (A) to the outlet box
(not included) using two screws (supplied with outlet
box). Pull the black, white and grounded wires out of the
outlet box through the hole in the mounting plate (A) and
lay them to the side.
Note: Make sure the outlet box is securely installed in
place such that it is able to support at least the fan
weight.
1
Outlet box
4. Tape the wire connectors (AA) and wires together. The
wires should be spread apart with the grounded
conductor and the equipment-grounding conductor on
one side of the outlet box and the ungrounded conductor
on the other side of the outlet box. Be sure no bare wire
or wire strands are visible after making connection. Place
green and white connections on opposite side of box
from the black and blue connections. The splices should
be turned upward and pushed carefully up into the outlet
box.
4
Hardware Used
Screw
2. Carefully lift the motor (B) and engage the slot in the
preassembled bracket with the hook on the mounting
plate (A) so it is securely suspended.
A
AA
2
A
x4
Wire Connector
5. Lift the motor bracket so the threaded studs on the
mounting plate (A) protrude through the slots in the
motor bracket. Securely tighten the three lock nuts (BB)
onto the threaded studs. Note: Lightly shake the motor
bracket to ensure the assembly is tight.
Hardware Used
BB
Lock Nut
AA
5
Motor bracket
A
Threaded
stud
x3
E
BB
Bracket
B
NOTE: Black wire is hot power for fan. Blue wire is
hot power for light kit. White wire is common for fan White
and light kit. Green wire is grounded wire. lf house
wires are different colors than referred to above,
Black
stop immediately. A professional electrician is
Blue
recommended to determine proper wiring.
black
white
Supply circuit
blue
black
white
green
3. Connect the supply GROUNDED/GREEN wire to
3
the GREEN/GROUNDED wires from the motor
bracket using the wire connector (AA). Connect the
Grounded/
fan motor WHITE wire to the supply WHITE wire
Black
Green
White
using the wire connector (AA). Connect the fan
Green
motor BLACK and BLUE wires to the supply
BLACK wire using the wire connector (AA).
outlet box
6. Align the four clips on the inside of the motor housing (D)
with the four slots on the outer edge of the mounting
plate (A). Twist the motor housing (D) clockwise until it
stops to hold on the mounting plate (A).
A
Slot
GREEN/
GROUNDED
Clip
speed
switch
D
B
Lowes.com/harborbreeze
6
6
Lowes.com/harborbreeze
7
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
7. Attach a blade (F) to a blade bracket (E) using the
blade screws (EE). Tighten each blade screw (EE)
securely.
Repeat for the remaining blades (F).
10. Insert the wires from the motor (B) through the middle
hole in the switch housing (G). Attach the switch
housing (G) to the switch housing plate (C). Align the
keyslot holes and twist to lock.
Replace the screw previously removed (Step 9, page
8) and tighten all three screws.
7
EE
10
F
Hardware Used
EE
Blade Screw
x 16
8. Align the holes between the blade bracket (E) and motor
(B). Install the blade assembly to the motor (B) using
blade bracket screws with washers (FF). Tighten each
blade bracket screw with washer (FF) securely.
Repeat for the remaining blade assemblies.
8
Hardware Used
Blade Bracket Screw
with Washer
11. Remove the preassembled screws from the switch
housing (G).
E
Screw
Keyslot
hole
E
FF
C
G
11
B
x 11
FF
G
B
Screw
E
FF
E
9. Loosen two screws and remove one screw from the
switch housing plate (C).
G
12. Connect male plug from fan to female plug from the
light kit (H).
9
12
D
Male plug
Female plug
C
JJ
H
Screw
Lowes.com/harborbreeze
Lowes.com/harborbreeze
8
9
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
13. Attach light kit (H) to switch housing (G). Align the holes
between the switch housing (G) and light kit (H). Install
screws previously removed (Step 11, page 9) and
securely tighten.
16. Place glass bowl (I) on the preassembled pipe on light
kit (H)
pull chain through side hole of glass bowl (I). Make sure
pull chain hangs clear and is not tangled in light kit (H)
socket. Thread light kit pull chain through center hole of
glass bowl (I).
13
G
16
Note: Two people are recommended for this step.
Screw
H
I
14. Install the bulbs (L) into sockets.
14
17. Place previously removed rubber washer and hex
nut (Step 15, page 10) onto the pipe and securely
tighten. Pass the fan pull chain through the side hole of
D
17
over pipe and securely tighten.
Rubber
washer
Hex nut
J
K
L
15. Remove the preassembled rubber washer, hex nut,
15
18. Attach the fan pull chain extension (CC) and light kit
pull chain extension (DD) to corresponding chains.
18
D
Hardware Used
H
Hex nut
J
Rubber
washer
CC
Fan Pull Chain Extension
x1
DD
Light Pull Chain Extension
x1
DD
K
Lowes.com/harborbreeze
10
CC
Lowes.com/harborbreeze
11
OPERATING INSTRUCTIONS
WARRANTY
PULL CHAIN:
(1). The fan pull chain is for motor speed control: High, Medium, Low and Off. Pull the chain once for each
position.
(2). The light pull chain controls the light fixture either ON or OFF with each pull the chain.
The manufacturer warrants this fan to be free from defects in workmanship and material present at
time of shipment from the factory for lifetime limited from the date of purchase. This warranty applies
only to the original purchaser. The manufacturer agrees to correct such defect at no charge or at our
option replace the ceiling fan with a comparable or superior model.
To obtain warranty service, present a copy of your sales receipt as proof of purchase. All cost of
removal and reinstallation are the expressed responsibility of the purchaser. Any damage to the
ceiling fan by accident, misuse or improper installation, or by affixing accessories not produced by
the manufacturer of the fan, are at the purchaser’s own responsibility. The manufacturer assumes no
responsibility whatsoever for fan installation during the lifetime limited warranty. Any service
performed by an unauthorized person will render the warranty invalid.
Due to varying climatic conditions, this warranty does not cover changes in brass finish, rusting,
pitting, tarnishing, corroding or peeling. Brass finish fans maintain their beauty when protected from
varying weather conditions. Any glass provided with this fan is not covered by the warranty.
Any replacement of defective parts for the ceiling fan must be reported within the first year from the
date of purchase. For the balance of the warranty, call our customer service department at
1-800-643-0067 for return authorization and shipping instructions so that we may repair or replace
the ceiling fan. Any fan or parts returned improperly packaged is the sole responsibility of the
purchaser. There is no further expressed warranty. The manufacturer disclaims any and all implied
warranties.
The duration of any implied warranty which can not be disclaimed is limited to the lifetime limited
period as specified in our warranty. The manufacturer shall not be liable for incidental, consequential
or special damages arising at or in connection with product use or performance except as may
otherwise be accorded by law. This warranty gives you specific legal rights and you also have other
rights which vary from state to state. This warranty supersedes all prior warranties.
Note: A small amount of “wobble” is normal and should not be considered a defect.
REVERSE SWITCH:
When the season changes, you may want to change the direction the fan spins. To switch between clockwise
and counterclockwise rotation, flip the fan reversal switch.
NOTE: Wait for fan to stop before reversing the switch.
A. In warmer weather, counterclockwise rotation creates a downward airflow,
Snowflake icon
Sun icon
which cools the air. Push the switch LEFT and see a Sun icon.
B. In cooler weather, clockwise rotation creates an upward airflow, which
moves hot air from the ceiling into the room. Push the switch RIGHT and see a Snowflake icon.
CARE AND MAINTENANCE
• To reduce the risk of fire, electric shock or injury to persons, care and maintain this fan.
• IMPORTANT: Shut off main power supply before beginning any maintenance.
• Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly
dampened cloth will be suitable for most cleaning.
• Clean fan housing with only a soft brush or lint-free cloth to avoid scratching the finish. Clean
blades with a lint-free cloth. You may occasionally apply a light coat of furniture polish to blades for
added protection.
• At least twice each year, lower motor housing to check fan motor assembly, and then tighten all
screws on the fan.
• Bulb Replacement: Use three 60-watt max. type A15 candelabra-base bulbs.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Fan blades do not
move.
1. Chain switch is “off”.
2. Fan reversal switch not engaged.
3. Power is off or fuse is blown.
1. Pull chain switch.
2. Push switch firmly either way.
3. Turn power on or check fuse.
4. Turn power off. Loosen motor
housing; check all connections.
1. Tighten all blade screws.
2. Replace blades (call customer
service).
3. Replace with an approved speed
control device.
Noisy operation.
HH
1. Blades are loose.
2. Cracked blade.
3. Non-approved speed control.
II
Excessive wobbling. 1. Unbalanced blades.
2. Blades are loose.
3. Blade brackets incorrectly attached.
4. Fan not securely mounted.
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m.,
EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
PART
DESCRIPTION
E
Blade bracket
F
Blade
I
Glass Bowl
PART#
104000-0316NG
108002-505975
991300-0544FF
E
F
I
1. Use balanced kits.
2. Tighten all blade screws.
3. Reinstall blade brackets.
4. Turn off power. Carefully loosen
canopy; remount securely.
D
Printed in China
Harbor Breeze® is a registered
trademark of LF, LLC. All rights
reserved.
Lowes.com/harborbreeze
Lowes.com/harborbreeze
12
13
Open as PDF
Similar pages