®
R A I L I N G
S Y S T E M S
F O R
A L L
Y O U R
I N D U S T R I A L
N E E D S
G U A R D R A I L
PROTECTIVE
RAILINGS
M E Z Z A R A I L®
H A N D R A I L
GuardRail
Perfect solution to in-plant traffic protection
GuardRail
Install WireCrafters GuardRail in your plant to
protect people, machinery, and property from
accidents involving forklifts, sweepers, or other
moving equipment. This protective railing system helps prevent damage to equipment or facilities by providing a strong barrier along aisle
ways or in front of critical equipment. Create a
safety barrier with this competitively priced
guard rail system, and save the expense of costly downtime repairs by preventing the accident
with WireCrafters GuardRail.
Standard Single High
STYLES AND SIZES – WireCrafters GuardRail
comes in two styles, Single or Double Rail. Single
Rail columns are 17” high, Double Rail columns
are 43” high. All columns are 4” square x 1/4”
wall structural-steel tubing, with metal caps,
and 10” square x 1/2” thick steel base plates.
Base plates have four 7/8” round anchor holes.
Floor anchors provided.
RAIL LENGTHS – The 11-gauge formed steel
rails come in six standard lengths, 2’, 3’, 4’, 6’, 8’,
and 10’. Custom lengths are available.
QUICK INSTALLATION – Bolt components
together and anchor column base plates to the
floor. All necessary hardware is included with
your order.
OPTIONS – Rail Lift-Out kits, offset column baseplates, and corner offset columns are available.
Optional Lift-Out Rail
Rail Parts
R A I L S
Part No.
PR 2
PR 3
PR 4
PR 6
PR 8
PR 10
Standard Double High
WireCrafters, LLC • Louisville, Kentucky
C O L U M N S
Description
1’-8” Long
2’-8” Long
3’-8” Long
5’-8” Long
7’-8” Long
9’-8” Long
Part No.
PRSRR
PRSRC
Description
Single Run Post 17” High
Single Corner Post 17” High
PRDRR
PRDRC
Double Run Post 43” High
Double Corner Post 43” High
2
www.wirecrafters.com
Railing Systems
Mezzanine Railing and Hand Railing Systems
MezzaRail®
WireCrafters combined the strength of
square handrails with the versatility of
woven wire partitions to create the
MezzaRail® 420 Rail System. This
innovative handrail product provides
more protection than 3, 4, or even 5
rail designs without the cost of additional rails or installation. Yet the system is so strong it meets the BOCA and
OSHA requirements ”of withstanding a
load of 200 pounds applied in any
direction at any point on the rail.”
The system can be mounted to the
face-side or deck of any mezzanine.
Hinged, Sliding, and Lift-Out Gates are
available for access to the protected
area.
CALL FOR LAYOUT ASSISTANCE,
PRICING, AND COMPARE COST ON
YOUR NEXT MEZZANINE RAIL PROJECT.
HandRail
System is designed on 8’-0” centers and
comes in a standard two rail style. A 4”
high kickplate can be added as an option.
Rail sections combined with 6” run post
Part No.
HR 2
HR 4
HR 8
Easy Installation
Standard sized MezzaRail® panels,
with built-in kickplates, bolt to
upright posts. Two bolts per section.
No welding, no self-tapping screws.
All connecting hardware is easily
accessible to the installer. The results
are substantial cost savings to you in
manpower, time, and equipment.
The top rail is 42” high with the mid-rail
centered 20” from the floor. Rails and
posts are constructed of 2” square, 14
gauge steel tubing. Posts have a 4” x 4”
base plate with 7/16” diameter mounting
holes. Anchors by others. System may be
face mounted on mezzanines or deck
mounted to the floor.
P O S T S
Description
1’-6” Long
3’-6” Long
7’-6” Long
Not only does MezzaRail® provide you
with a sturdy handrail, but the mesh
component of each section acts as a
barrier to prevent items from passing
through to the ground below. Objects
that easily pass through multi-rail
systems are restrained by MezzaRail®
protecting people and property from
serious injury.
connectors or 4” corner/end posts to layout on 2’, 4’, or 8’ centers. Stock rails can
be field cut for custom lengths.
System 22 HandRail makes an excellent
aisle way, machine guard rail, mezzanine
rail or robot guard. This square steel rail
system bolts up with standard hand tools.
R A I L S
Better Protection
Part No.
HRRP
HRCP
HREP
K I C K P L AT E S
Description
42” Run
42” Corner
42” End
Part No.
HRKP 2
HRKP 4
HRKP 8
Description
2’-2” Long
4’-2” Long
8’-2” Long
3
WireCrafters, LLC • Louisville, Kentucky
www.wirecrafters.com
Specifications
GuardRail, MezzaRail, and HandRail
GuardRail
MezzaRail®
HandRail
COLUMNS – All columns shall be made of 4”
square x 1/4” wall structural steel tubing,
with 10” square x 1/2” thick steel base plates
securely welded to the column, and metal
cap. Uprights shall have 9/16” holes drilled
at the factory to accept rail mounting hardware. Single rail columns are 17” high, double rail columns 43” high. Column uprights
shall be centered on base plates with four
7/8” holes for anchoring to the floor. Column
uprights with offset base plates may have
three holes for anchoring to the floor.
PANELS – Constructed of 1-1/4” x 1-1/4” x
1/8” steel angle frame, with integrated 4” x
1-1/4” x 14 gauge kick plate across the bottom, and 2” x 1” opening 10 gauge woven
wire mesh securely welded into frame.
Standard panels are 42” high and 7’-10” long.
Each panel has 2” square 14 gauge steel top
rail welded to a framed wire mesh panel.
POSTS AND RAILS – Constructed of 2” square
14 gauge steel tubing. Two formed 14 gauge
steel inserts with 1/8” threaded flat bar shall
be provided to connect each rail section to
post. All parts factory drilled to accept 3/8”
mounting hardware.
RAILS – All rails shall be formed from 11
gauge steel free from burrs and surface
defects, with 3-1/2” x 13” x 1/4” steel end
plates securely welded to each. Standard rail
sections lengths are 1’ 8”, 2’ 8”, 3’ 8”, 5’ 8”,
7’ 8” and 9’ 8”. Custom lengths available.
OPTIONS – Rail Lift Out kits, offset column
base plates, and corner offset columns are
available.
HARDWARE – Rails mount to columns with
1/2” x 5” through bolts. Columns anchor to
floor with 3/4” x 4-1/4” wedge type
anchors. Hardware provided.
FINISH – All non-plated parts receive two
coats of yellow enamel.
POSTS – Newel type posts made of 2”
square 14 gauge steel tubing, with decorative steel cap welded into place. Deck
mount posts have 3/8” x 2” x 7” base plates
securely welded to each. Face mount posts
utilize a 1/4” x 2” x 8" plate and bolt to
mezzanine’s structural edge. MezzaRail®
panel section and post combine to make
maximum 8' 0” post centers.
HARDWARE – Standard 3/8” grade 2 plated fasteners are supplied for connecting panels and
posts. Floor or deck anchors are not provided.
FLOOR SOCKETS – Consist of 4” x 4” x 1/4”
base plate punched with four 7/16 round
mounting holes, with a single formed 11
gauge steel mounting channel securely welded into place.
KICKPLATE – Shall be 4” in height, constructed of 16 gauge sheet steel, formed at
ninety degrees along the top edge and
punched with slotted holes on each end for
mounting to upright posts. Ends of adjacent
kickplates overlap where mounted to post.
FINISH – All non-plated parts receive two
coats of yellow enamel.
FINISH – All non-plated parts receive two
coats of yellow enamel.
INSTALLATION – Buyer should seek the
technical assistance necessary to determine
the proper anchorage/attachment technique required for each installation.
Determination of the anchoring/attachment
method used is solely at the buyer’s discretion and should be determined with the
special structural conditions of the project.
6208 Strawberry Lane
Louisville, KY 40214
800/626-1816
502/363-6691
502/361-3857 FAX
www.wirecrafters.com
4
WireCrafters, LLC • Louisville, Kentucky
www.wirecrafters.com
Open as PDF
Similar pages