Reverse Guide Implant Technique

Reverse Guide Implant Technique
1
A Guide Drill (Diameter 2mm) is
used to drill pilot holes into the
plastic model.
The Reverse Guide Implant
Technique utilizes surgical
guides without the use of any
software.
2
Guide Pins (Diameter 2 mm)
are inserted into the guide
holes to check drill depth and
to locate the Master Tube and
Drill Guides.
It offers surgeons an easy
preparation, high precision
and increased safety of
implant placement.
The technique is practice
based and offers a fast and
low-cost solution for doctors.
3
The Master Tube and Drill Guide
(Diameter 2 mm) are inserted
into the mold.
4
To fix the Master Tube with a
surgical stent, resin is applied
onto the model.
5
APPLICABLE FOR ALL
IMPLANT SYSTEMS
Finally the surgical stent is
removed from the plastic model
and the Drill Guides are replaced
as required by the implant
system. If required, Manual Drill
Guides can be used with the
RGIT.
Only one disposable Master
Tube is required per implant.
The technique is easy to
correct making it ideal for
beginners and an invaluable
aid for professionals
For more information please contact:
Trinon Titanium GmbH
Augartenstr. 1
D-76137 Karlsruhe / Germany
Tel.: +49 721 932700
Fax: +49 721 24991
trinon@trinon.com
www.trinon.com
Reverse Guide Implant Technique
Product
Art. No.
Product Name
Q6001
RGIT Drill Diameter 2mm
Q6002
RGIT Pin Diameter 2mm
Q6003
RGIT Master Tube Diameter 4mm
Q6020
RGIT Drill Guide Diameter 2mm
Q6022
RGIT Drill Guide Diameter 2.2mm
Q6025
RGIT Drill Guide Diameter 2.5mm
Q6028
RGIT Drill Guide Diameter 2.8mm
Q6030
RGIT Drill Guide Diameter 3.0mm
Q6033
RGIT Drill Guide Diameter 3.3mm
Q6035
RGIT Drill Guide Diameter 3.5mm
Q6120
RGIT Drill Guide Manual Diameter 2mm
Q6122
RGIT Drill Guide Manual Diameter 2.2mm
Q6125
RGIT Drill Guide Manual Diameter 2.5mm
Q6128
RGIT Drill Guide Manual Diameter 2.8mm
Q6130
RGIT Drill Guide Manual Diameter 3.0mm
Q6133
RGIT Drill Guide Manual Diameter 3.3mm
Q6135
RGIT Drill Guide Manual Diameter 3.5mm
Open as PDF
Similar pages