Multi-Languages QIG on the CD
Český
Českého průvodce rychlou instalací naleznete na
přiloženém CD s ovladači.
Deutsch
Auf der beiliegend Treiber CD finden Sie deutsche
Anleitung zur Schnellinstallation.
Español
Incluido en el CD el G.R.I. en Español.
Français
Veuillez trouver l’français G.I.R ci-joint dans le CD.
Italiano
Incluso nel CD il Q.I.G. in Italiano.
Magyar
A magyar telepítési útmutató megtalálható a mellékelt
CD-n.
Nederlands
Polski
Português
Русский
Türkçe
Romania
繁/簡體中文
De nederlandse Q.I.G. treft u aan op de bijgesloten CD
Skrócona instrukcja instalacji w języku polskim
znajduje się na załączonej płycie CD.
Incluído no CD o G.I.R. em Portugues.
Русский: Найдите Q.I.G. на pусскoм языке на
приложеном CD.
Ürün ile beraber gelen CD içinde Türkçe Hızlı Kurulum
Kılavuzu'nu bulabilirsiniz.
Cd-ul cuprinde Ghid de instalare rapida in limba
romana.
CD 片內含繁體中文及簡體中文快速安裝指南
1
English
Copyright© by Getnet Technology Co, LTD. all rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval system,
or translated into any language or computer language, in any form or by any means,
electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the
prior written permission of this Company .
This company makes no representations or warranties, either expressed or implied,
with respect to the contents hereof and specifically disclaims any warranties,
merchantability or fitness for any particular purpose. Any software described in this
manual is sold or licensed "as is". Should the programs prove defective following
their purchase, the buyer (and not this company, its distributor, or its dealer) assumes
the entire cost of all necessary servicing, repair, and any incidental or consequential
damages resulting from any defect in the software. Further, this company reserves
the right to revise this publication and to make changes from time to time in the
contents hereof without obligation to notify any person of such revision or changes.
The product you have purchased and the setup screen may appear slightly different
from those shown in this QIG. For more detailed information about this product,
please refer to the User Manual on the CD-ROM. The software and specifications are
subject to change without notice. Please visit our web site www.getnet.com.tw for the
update. All rights reserved including all brand and product names mentioned in this
manual are trademarks and/or registered trademarks of their respective holders .
Linux Open Source Code
Certain Getnet products include software code developed by third parties,
software code is subject to the GNU General Public License ("GPL") or GNU
Lesser General Public License ("LGPL"). Please see the GNU (www.gnu.org)
and LPGL(www.gnu.org) Websites to view the terms of each license.
The GPL Code and LGPL Code used in Getnet products are distributed without
any warranty and are subject to the copyrights of their authors. For details, see
the GPL Code and LGPL Code licenses. You can download the firmware-files at
http://www.getnet.com.tw under "Download" page.
2
Product Introduction
Thank you for purchasing Getnet GR-154 broadband router! This high cost-efficiency
router is the best choice for Small office / Home office users, all computers and
network devices can share a single xDSL / cable modem internet connection at high
speed. Easy install procedures allows any computer users to setup a network
environment in very short time - within minutes, even inexperienced. When the
number of your computers and network-enabled devices grow, you can also expand
the number of network slot by simple attach a hub or switch, to extend
the scope of your network!
You can configure the router by running the Setup Wizard in the CD-ROM
provided in the package. The wizard provides quick setup for the Internet
connection, firmware upgrade and changing router’s password. When you start
the Setup Wizard, you will get the following Welcome screen. Please choose
the language to start with and follow the easy steps in the Wizard.
3
1 Package Contents
Before you starting to use this router, please check if there’s anything missing in the
package, and contact your dealer of purchase to claim for missing items:
□ Broadband router (main body, 1 pcs)
□ Quick Installation Guide (1 pcs)
□ One CD-ROM (Including the Setup Wizard, Multi-languages Quick Installation
Guide and User Manual)
□ 9V DC power adapter (1 pcs)
□ Ethernet Cable
2 Front Panel
LED Light Status Description
LED
Light Status
Description
PWR
On (Steady Green)
Broadband Router is powered on.
Off
No power
On (Steady Green)
System is hung.
Flashing
Broadband Router is up and ready.
LAN
On (Steady Amber)
LAN port is successfully connected.
(1, 2, 3, 4)
Flashing
Data is being sent or received.
WAN
On (Steady Amber)
WAN port is successfully connected
Flashing
Data is being sent or received.
Status
4
3 Back Panel
4 Getting Start
Button/port Description
Button/port
Description
Reset
Reset configurations to default. Press the button and hold
for 10 seconds.
1, 2, 3, 4
LAN Ports. Connect LAN systems with RJ-45 cable.
WAN
WAN port. Connect DSL or Cable modem.
PWR
Power jack. Connect with AC power adapter.
Cabling installation:
1.
Connect the Ethernet cable from the router’s WAN port to the LAN port of the
modem.
2.
Connect another Ethernet cable from the any LAN ports (1~4) on router to the
Ethernet socket on the PC.
5
3.
Check to make sure the router’s LINK LED is lit; to confirm the cable
connections are made correctly.
Note: Please refer to the User Manual in the CD-ROM for more details
information and to configure all others setting.
6
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
This device and its antenna must not be co-located or operating in conjunction with any other antenna
or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could
void the authority to operate equipment.
Federal Communications Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In
order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity
to the antenna shall not be less than 2.5cm (1 inch) during normal operation.
Federal Communications Commission (FCC) RF Exposure Requirements
SAR compliance has been established in the laptop computer(s) configurations with PCMCIA slot on
the side near the center, as tested in the application for Certification, and can be used in laptop
computer(s) with substantially similar physical dimensions, construction, and electrical and RF
characteristics. Use in other devices such a PDAs or lappads is not authorized.
This transmitter is restricted for use with the specific antenna tested in the application for Certification.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN
PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication
terminal Equipment and the mutual recognition of their conformity (R&TTE)
The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal
Equipment and Satellite Earth Station Equipment) As of April 8, 2000.
Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However,
special attention must be paid to the dangers of electric shock and static electricity when working with
electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed
at all times to ensure the safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark,
Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, the Netherlands, Portugal, Spain,
Sweden, and the United Kingdom.
The ETSI version of this device is also authorized for use in EFTA member states: Iceland,
Liechtenstein, Norway, and Switzerland.
EU Countries not intended for use
None
7
Open as PDF
Similar pages