Caddy® Mig C160i
Portable MIG/MAG welding unit with built-in wire
feeder for 200 mm spools
Caddy® C160i is used for MIG/MAG welding
of mild steels for repair, maintenance and
assembly work. This easy to use and
powerful unit, offers excellent welding
properties and is easy to take along to the
job at hand. Great if you are welding in the
workshop or on the move.
Advanced design gives you options
Advanced and modern materials provide,
lightweight, durable and impact resistant housing
with inbuilt cable wraps for ease of transportation.
Th low
The
l
weight
i ht off 11
11.4
4 kkg makes
k it easy tto move
to different indoor or outdoor worksites
More welding power than ever before
The PFC (power factor correction) gives 30 % more
welding power from the same fuse size.
Applications
The performance of this unit makes it a superb
choice for mild steel welding applications. Perfect
for tradesmen working with repair, maintenance or
assembly work in the workshop, outdoors or at
different sites. Single phase mains connection
makes it easy to find a electricity supply. Works
equally as well when powered by a portable
generator.* The Caddy Mig C160i has optimized
per-formance for welding with 0.8 mm wire on mild
steels using solid or cored wires.
Automatic function and simplicity
p
y
With Caddy Mig C160i you only need to set the
plate thickness before starting to weld. Hotter or
colder welds can easily be obtained by using the
heat adjustment knob.
Description
Caddy Mig C160i has an efficient built-in inverter
power source. Inside the side panel there is a wire
feeder as well as space
p
for the wire spool.
p
Spool type needed
Wire spool size: inner diameter 51 mm, external
diameter 200 mm and width 55 mm.
Recommended wires/gas
ESAB’s OK Autrod 12.51 diameter 0.8 mm, for
welding mild steels. A high quality copper coated wire
for excellent mild steel welding results.
ESAB’s Coreshield 15, diameter 0.8 mm, for welding
mild steels. A cored wire that builds a slag protection
and therefore needs no gas to weld a large variety of
mild steels. Change polarity for best result.
*To obtain full output use a 5.5 Kva portable generator with automatic voltage
regulation
Applications
pp
• Easy
y to use - Set material thickness and start welding
g
•
•
•
•
•
•
•
•
•
• The low weight and small size makes it easy to get to
the worksite, indoors or outdoors.
Repair, maintenance or assembly work
Agricultural applications
Auto-repair
Light metal fabrication
Transport
Education
Household and furniture
Tack welding
Use with an automatic voltage regulated
generator
XA00149320
• Has PFC (power factor correction) and complies to
European "Harmonics" demands = uses energy
efficiently
• Polarity change = possibility to use gasless cored wire
• Fitted with ESAB high
g quality
y MXL180 torch, 3 m long
g
• Optimized for 0.8mm mild steel wires
Technical data
Operating temperature, °C
230 1ph 50/60 +-15%
16
16
1.5
160 Amps
150/20.5
100/19
30-160
60
2 – 11
200 (5)
15
0.99
82%
449x198x347
11.4
IP23C
S
IEC/EN 60974-1,
EN 60974-05,
EN 60974-10
-10 to +40
Angled panel, shelf for wear parts & tools, grooves for cables
and torch storage
g under transport
p are jjust a few design
g
features to simplify your work
Ordering information
Caddy®
Mig C160i, 1ph 230V
½ pallet with 6 Caddy® Mig C160i
Trolley with gas shelf
Standard with shoulder strap.
0349 310 850
0349 312 272
0459 366 887
Delivery content: 3 m torch, 3 m mains cable with plug.
4,5 m gas hose with hose clamp and quick connector,
return cable with clamp, simple shoulder strap, fitted
wear parts in torch/feeder (for 0,8 mm wire) and
instruction manual. 1 kg OK Autrod 12.51, 0.8 mm is
also included.
Trolley - for easier transport of gas
bottle and Caddy® Mig.
Wear parts
Feed roller with groove
Pressure roller
Inlet nozzle, in feeder
Gas nozzle (1)
Contact tip (2) for 0.8mm wire
Nozzle spring (3)
Steel liner (4) for 0.8mm wire
Tip adapter(5)
0349 311 890
0349 312 062
0455 049 002
0700 200 054
0700 200 064
0700 200 078
0700 200 085
0700 200 072
Wear parts, torch MXL180
5
4 3
2
1
Consumable wires on Ø200 mm bobin
OK Autrod 12.51 Ø 0.8mm,, 5kg
g
Coreshield 15 Ø 0.8 mm, 4.5kg
1251084600
35UE084630
Quality accessories for the quality welder
ESAB offers a wide range of accessories. The complete
range, along with product information, is available at our
local web-sites, look at www.esab.com or contact your
local ESAB dealer.
ESAB AB
Box 8004
SE-402 77 GÖTEBORG SWEDEN
Phone: +46 31 50 90 00 Fax +46 31 22 04 49
E-mail: info@esab.se
www.esab.com
2010-07-12 / E
ESAB reserves the right to a
alter specifications without prior notice
Mains voltage, V/Ph Hz
Fuse (slow),
(slow) A
Auto fuse (MCB) EN 60898 type B
Mains cable, Ø mm
Maximum welding output
Permitted load, at 40oC
35% duty cycle, A/V
100% duty cycle, A/V
Setting range, A
Open circuit voltage, V
Wi ffeed
Wire
d speed,
d m/min
/ i
Max. size of the wire reel, mm (kg)
Open circuit power, W
Power factor at maximum current
Efficiency at maximum current, %
Dimensions lxwxh, mm
Weight with torch & cables, kg
Enclosure class
Application class
Standards
Open as PDF
Similar pages