TiR125, TiR110, TiR105 Building Diagnostic and the Ti100 General Use Thermal Imagers Technical Data The lightest, most-rugged, easiest–to-use professional thermal imagers around. Whether you’re searching for air leaks, hidden moisture, construction defects, or other building issues, a Fluke thermal imager delivers a huge competitive advantage—it allows you to work faster and more efficiently, and document your findings. Ti100 TiR125 Made in the U.S.A. of U.S. and non U.S. parts TiR110 ™ TiR105 Fluke CNX™ enabled Building problems, defects and general maintenance Energy audit, building inspection, and weatherization Restoration, water damage, and roofing Key features •Exclusive IR-OptiFlex™ focus system—ensures that images are in good focus from 1.2 m (4 ft) and beyond for optimum image clarity and scanning convenience. For shorter distances change to manual mode with the touch of a finger (TiR110 and TiR125). •Always have references handy—IR-PhotoNotes™ annotation system—Quickly identify and keep track of inspection locations by adding digital images of important information and surrounding areas (TiR110 and TiR125). •Find problems faster and easier with Fluke IR-Fusion® technology (TiR125, TiR110, TiR105). Accurately identify potential issues by combining digital and IR images. •Capture additional measurements fast and conveniently from up to five wireless modules at once using your Fluke thermal imager and CNX™ wireless modules. •Get further clarification with AutoBlend™ mode - the blending of a digital and partially transparent IR image into a single information-filled image (TiR125 only). •Multi-mode video recording—focus-free video in visible light and infrared with full IR-Fusion (TiR110 and TiR125 only). •Easily communicate the location of problems with the Electronic 8-Point Cardinal Compass (TiR125 and TiR110 only). Spend less time in the field and more time growing your business with these new Fluke thermal imagers. Patented Fluke IR-Fusion® Technology Enjoy the industry’s only point-and-shoot IR-Fusion camera. Fluke patented technology provides the user with both a digital and an infrared image in one to precisely document problem areas. IR-OptiFlex™ focus system Scan for issues significantly faster than before with Fluke’s revolutionary, ultra-rugged focus system. The IR-OptiFlex focus system gives you optimum focus by combining focus-free, ease-of-use with the flexibility of manual focus on the same camera. Detailed specifications TiR125 TiR110 TiR105 Ti100 Building diagnostics IR resolution (FPA size) General use 160 x 120 FPA Uncooled Microbolometer Spectral band 7.5 μm to 14 μm (long wave) Capture or refresh rate 9 Hz NETD (Thermal sensitivity) ≤ 0.10 °C at 30 °C target temp (100 mK) ≤ 0.08 °C at 30 °C target temp (80 mK) FOV (Field of view) 22.5 °H x 31 °V IFOV (Spatial resolution) 3.39 mRad Temperature measurement range (not calibrated below -10 °C) -20 °C to +150 °C (-4 °F to +302 °F) Temperature measurement accuracy -20 °C to + 250 °C (-4 °F to 482 °F) ± 2 °C or 2 % (at 25 °C nominal, whichever is greater) IR-OptiFlex™ focus system Focus mechanism PIP, FULL IR, FULL VISIBLE, AutoBlend™ IR-Fusion® technology Focus-free 1.2 m (4 ft) and beyond PIP, FULL IR, FULL VISIBLE CNX™ Wireless enabled Low temperature (dewpoint) — Blue-Red, Grayscale, Inverted Grayscale, High-contrast, Hot Metal, Ironbow, Amber, Inverted Amber Standard palettes Ultra Contrast™ palettes Hot/cold markers Blue-Red, Grayscale, Inverted Grayscale, High-contrast, Hot Metal, Ironbow, Amber, Inverted Amber Blue-Red, Ironbow, Grayscale, Amber Blue-Red, Grayscale, Ironbow — Yes User definable spot markers No, full IR only Yes High termperature, low temperature (dewpoint), and isotherm Color alarms PIP (1.2 m (4 ft) to 4.6 m (15 ft)), FULL IR, FULL VISIBLE — Three on camera and in SmartView® Centerpoint in SmartView® only Yes Centerbox (MIN/AVG/MAX) Yes — Level and span control Manual and auto Minimum span in auto mode 2.5 °C 5 °C Minimum span in manual mode 2.0 °C 2.5 °C Minimum IR focus distance 15.25 cm (6 in) 122 cm (48 in) Weight 0.726 kg (1.6 lb) Size 28.4 x 8.6 x 13.5 cm (11.2 x 3.4 x 5.3 in) LCD display 3.5 inch diagonal (portrait format) Visible camera 2 megapixel industrial-grade Minimum parallax ~45.7 – 55.9 cm (~ 18 in – 22 in) IR-PhotoNotes™ annotation system Yes (3 images) N/A — Laser pointer Yes Torch Yes Electronic (cardinal) compass — Yes Emissivity correction — Yes Transmission correction Yes Background (reflected) compensation Multi-mode video recording (standard AVI with MPEG encoding) Multi-mode video recording (radiometric .is3) — Yes Voice annotation (audio) Multi-mode video output Yes (60 seconds) per image — Streaming USB video output — Yes (AVI with MPEG encoding) — Yes, radiometric .is3 for approx. 2.5 to 5 minutes depending upon thermal scene Memory review — thumbnail review Battery (field-replaceable, rechargeable) Two Battery life One 4+ hours (each)* External battery charging base Charging power supply Included Optional (accessory) Yes *Assumes 50 % brightness of LCD 2 Fluke Corporation N/A ~122 cm (48 in) TiR125, TiR110, TiR105 Building Diagnostic and Ti100 General Use Thermal Imagers TiR125 TiR110 TiR105 Buidling diagnostics Drop test Ti100 General use 2 meter (6.5 feet) Ingress protection (IP) rating (IEC 60529) IP 54 Est. calibration cycle Two-years Multifunction card reader Included — Memory storage 2 GB SD memory card Direct download capability mini USB direct download Operating temperature range -10 °C to +50 °C (14 °F to 122 °F) Storage temperature range -20 °C to +50 °C (-4 °F to 122 °F) Operating humidity Operating and storage 10 % to 95 %, non-condensing Vibration and shock 2G, IEC 68-2-26 and 25G, IEC 68-2-29 Safety standards CSA (US and CAN): C22.2 No. 61010-1-04, UL: UL STD 61010-1 (2nd Edition), ISA: 82.02.01 C Tick IEC/EN 61326-1 EMI, RFI, EMC EN61326-1; FCC Part 5 User manuals Czech, English, Finnish, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese, Turkish, Dutch, and Hungarian Standard warranty period Two-years Extended warranty and service plans Yes Ordering information FLK-TiR125 9HZ FLK-TiR110 9HZ FLK-TiR105 9HZ FLK-TI100 9HZ Building Diagnostics Thermal Imager Building Diagnostics Thermal Imager Building Diagnostics Thermal Imager General Use Thermal Imager Included with product Thermal imagers are shipped with ac power adapter, lithium ion smart battery (TiR125 includes two each—other models one each), USB cable, SD memory card, hard carrying case, soft transport bag, adjustable hand strap (left- or right-handed use), printed users manual in English, Spanish, French, German and Simplified Chinese, others on CD, SmartView software and warranty registration card. TiR125 model also includes a two-bay charging base and a multi-format USB memory card reader. CNX wireless modules FLK-CNX i3000 iFlex™ AC Current Clamp Module FLK-CNX a3000 AC Current Clamp Module FLK-CNX v3000 AC Voltage Module FLK-CNX t3000 K-Type Temperature Module ® Optional: FLK-TI-VISOR2 FLK-TI-TRIPOD2 BOOK-ITP FLK-TI-SBC3 FLK-TI-SBP3 TI-CAR CHARGER ™ Sun visor Tripod mounting accessory Introduction to Thermography Principles Book External charging base and power supply Extra lithium-ion rechargeable smart battery Thermal imager vehicle charger Not available in all countries. For more information on CNX™ wireless thermal imagers and other CNX™ solutions go to www.fluke.com/cnx 3 Fluke Corporation TiR125, TiR110, TiR105 Building Diagnostic and Ti100 General Use Thermal Imagers Fluke Corporation PO Box 9090, Everett, WA 98206 U.S.A. Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands For more information call: In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa +31 (0) 40 2675 200 or Fax +31 (0) 40 2675 222 In Canada (800)-36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com ©2012-2013 Fluke Corporation. Specifications subject to change without notice. Printed in U.S.A. 3/2013 4026536E_EN Modification of this document is not permitted without written permission from Fluke Corporation.