Dual Channel
Amplifier
M-700/1000
Features
n M-700
n
n
n
n
n
n
n
n
n
350W @ 4 ohms stereo
220W @ 8 ohms stereo
700W @ 8 ohm bridged mono
M-1000 500W @ 4 ohms stereo
330W @ 8 ohms stereo
1000W @ 8 ohms bridged mono
Frequency response
10 Hz—35 kHz, ±0.5dB
Dual variable-speed cooling fans
Soft Start Protection System
Balanced 20kW @ 0.775V inputs
<0.1% Total harmonic distortion
Protection circuitry
Signal, protection, clip indicators
Rack mount - 2 spaces
Description
The M-700 and M-1000 are dualchannel concert grade amplifiers.
Their low profile size and clean, linear
sound make them ideal for permanent
installation in professional P.A.
systems, or for road use in live
performances. Inputs are XLR/TRS
“Combo” connectors, outputs are via
rugged 5-way binding posts or
Speakon ® connectors. Multiple
amplifiers can be bridged together via
XLRM connectors on each input.
Both units have soft start protection
circuitry and feature signal, protection
and clip indicators on the front panel.
For added versatility, they may be
operated in stereo, dual mono or
bridged mono mode. Dual variablespeed fans provide low noise
ventilation.
The M-series amplifiers are
powered by 110VAC @ 60 Hz
and are packaged in a 3 1/2"
high rack mount enclosures.
Technical Specifications
ELECTRICAL
Power output
M-700
M-1000
220W - 8W , 350W - 4W , 700W mono
330W - 8W , 500W - 4W , 1000W mono
Frequency response
10 Hz - 35 kHz + 0.5dB
THD
< 0.1%
Damping factor
> 150
Input
0.775V/20kW ; 1/4” TRS and XLR 1/4" Combo Connector
Output connectors
5-way binding post or Speakon®
GENERAL
Power source
110 VAC @ 60Hz
Power consumption
520 watts
Weight
33 lbs (15 kg)
Dimensions (W x H x D) 19" (482mm) x 31/2" (88mm) x 141/2 (369mm)
770 watts
37.4 lbs (17 kg)
19" (482mm) x 31/2" (88mm) x 141/2" (369mm)
All specifications subject to change without notice. Information furnished is believed to be accurate and reliable. However, no responsibility
or liability is assumed by its use, nor for any infringement of patents or other rights of third parties which may result from its use.
Available from:
Dallas, Texas
Vancouver, BC
Tel (903) 455-2001
Tel (604) 291-8401
800-233-5014
800-663-1042
Fax (903) 455-2233
Fax (604) 294-2697
Specifications subject to change without notice.
© Burtek Systems Inc.
INT1200 Printed in U.S.A.
M-Series Amplifiers Architectural and Engineering Specifications
The power amplifier shall be a dualchannel amplifier capable of RMS
output power of ________ [220w/M700 or 330w/M-1000] watts @ 8 ohm
per channel, ________ [350w/M-700
or 500w/M-1000 watts @ 4 ohm per
channel, and ________ [700w/M7000 or 1000w/M-1000] watts @ 8
ohm bridged mono. Inputs shall be
combo type XLR/TRS ¼”connectors
and output is via rugged 5-way
binding posts and Speakon ® NL4
style connectors. Input sensitivity shall
be 0dBV @ 20K ohms. The unit shall
have a “Soft Start” system to protect
speakers against excessive power
surges upon power on or power off.
distortion shall be less than 0.1%; and
input sensitivity and impedance shall
be 0dB @ 20k ohm.
The unit shall meet the following
performance criteria:
The amplifier shall measure 19" (482
mm) width x 3.5" (88 mm) height x
14.5" (369 mm) depth and shall be
powered by 110VAC @ 60 Hz.
Frequency response shall be from 10
Hz to 35 kHz ± 0.5 dB; total harmonic
The power amplifier shall be an InterM
model [M-700/M-1000].
M-1000 Front & Rear Views
Available from:
Dallas, Texas
Vancouver, BC
Tel (903) 455-2001
Tel (604) 291-8401
800-233-5014
800-663-1042
Fax (903) 455-2233
Fax (604) 294-2697
Specifications subject to change without notice.
© Burtek Systems Inc.
INT1200 Printed in U.S.A.
Open as PDF
Similar pages