Manual - Skyfood Equipment LLC

Instructions Manual
Meat Grinder
Office
Phone: 1-800-503-7534 / 305-868-1603
Fax: 305-866-2704
Warehouse
Phone: 1-800-445-6601 / 973-482-5070
Fax: 973-482-0725
sales@skyfood.us - www.skyfood.us
TOLL FREE 1-800-503-7534
Model
TC22IHD
UG0106 - August /2011
SUMMARY
1- BRIEF INTRODUCTION
1
2- OVERVIEW
1
3- FEATURES
1
4- OPERATlON
1
5- SPECIFICATION
3
6- GENERAL SAFETY PRACTICES
4
7- ELECTRICAL DIAGRAM
6
1- PRODUCTION BRIEF INTRODUCTION
1All closed gears driving,compact structure,steady running,and reassuring
Working. Stainless steel used in all parts of the machine which may, have contact
with food.
2Cooling fan equipped in these model,however,check the body’s temperature
is needed.
3-Motor equipped with cooling fan.
2-OVERVIEW
Grinders are intended for heavy duty work in commercial food processing
applications.Their exceptional reliability and attractive compact design
make them ideaI for all commercial kitchens.
3-FEATURES
-PowerfuI, energy-efficient motor
-Precision gear drive for years of trouble free service
-CompIete stainIess steeI unit
-Conforms to aII safety standards easy to remove attachments and grinder
head
-SuitabIe for any commercial kitchen and/or Supermarket
4-OPERATlON
IMPORTANT:Before connecting your unit to the power supply,be sure
your machine’s electricaI specifications,printed on the unit’s nameplate,
match those of your IocaI power.
1Before first time use,remove the grinder head and wash parts throughly.
Reassemble according to the diagram included in these instructions.
2Before grinding,tighten the thumb screw clockwise untiI secure.Do not
use a tool or over-tighten.
01
This product will be replaced or repaired under warranty, for a period of (6) months,
beginning from the date of purchase by the original purchaser/user (“End User”), or
eighteen (18) months from the da te of shipment from SKYFOOD’s ware house,
whichever expires first.
Accessories wil l be re placed o r repaired under wa rranty, for a period of (30) days,
beginning from the da te of purcha se by th e original purchaser/user (“En d User”), or
eighteen (18) months from the date of shipment from SKYFOOD’s wa rehouse, whichever
expire s first.
This warranty shall not take effect until a properly completed and executed WARRANTY
REGISTRATION form has been received by SKYFOOD EQUIP MENT, LLC, within thirty
(30) days from the da te of purch ase. The WARRANTY REGISTRATION is available either
in the Instruction Manual of every Product or at SKYFOOD’s website www.skyfood .us. The
End User must fill out the WARRANTY REGISTRATION form and send it to SK YFOOD
according to the instructions p osted on the referred website. Failure to do so will VOID
the warranty.
No extended warranties for third party products. There are no other express
warranties or conditions othe r than the one offered by each manufacturer for
products sold by SKYFOOD, not under the FLEETWOOD by SKYMSEN and
SKY MSEN brand.
For questions or assistance, do not return the p roduct or accessories to the store, please
call Toll Free 1-800-503-7534, or visit the Customer Service section at www.skyfood.us.
For faster service please have th e items name , serial number, and proof of purchase for
the operator to assist you.
SKY FOOD reserve s the right to change the term s of its limited warranty at any time
without any prior notice. It also reserves the right to change the design and
specifications of its equipment or any related documentation at any time. The e nd
user is not entitled to upgrades or refunds resulting from these changes.
Updates
These Terms and Conditions were last updated on January 14th, 2014.
3Prepare meat for grinding by removing aII skin and bones.Then cut the
meat into appropriately sized pieces for grinding.
4Feed meat into the grinding chamber with the speciaI meat pusher
that is included with your machine. Never use fingers,hands,or any
other objects.
5Equipped with enough grease for severaI years usage.DO NOT FILL.If
needed use Lithium generaI purpose grease.
6After use, disconnect the unit from the power supply and disassembIe
the head.Wash throughly to prevent contamination.
7If motor quits, use reset button to reinstate the power surge.
8If the motor stops moving, the motor may be overloaded, causing over-current
protection switch tripped.
Turn off switch and disconnect the power. After a while ( about one
minute ), make sure that you press the Reset, and then turn on the switch.
If you repeat above procesure three times and the motor steel does not work,
please contact the service centre.
NOTE:During grinding,meat should be discharged from the
grinder smoothly. If the discharge is not smooth,or if it is in
the form of a paste,the following causes and remedies should
be considered:
Possible Cause
1 Coupling Ring too tight
2 Discharge Plate is blocked
3 Blade edges have dulled
Remedy
Loosen and hand-tighten only untilsnug. Don’t over-tighten.
Remove Discharge Plate and clean,then re-install
May be sharpened, recommend replacing.
02
5- SPECIFICATIONS
SKYFOOD EQUIPMENT LLC - SERVICE
PRODUCTIVITY
BLADE SPEED
POWER
TENSION
DIMENSIONS
NET WEIGHT
GROSS WEIGHT
Lb
rpm
HP
V
Inches
Lb
Lb
550
170
1,5
110
22” 27/32 x 14”13/32 x 23”21/32
99
102.3
*Available ss meat grinder head can be attached to any #12 or #22
attachment hub.
Standard Accessorles
*ss cutter
*ss 6mm plate
*ss 8mm plate
For questions o r assistance, call SKYFOOD EQUIP MENT Toll Free : 1-800-503-7534, or
visit the Customer Service section at www.skyfood.us.
SKYFOOD’S LIMITED WARRANTY
Un less otherwise specified, new FLEETWOOD by SKYMSEN and SKYMSEN products,
excluding accessories, sold by SKYFOOD EQUIPMENT, LLC. (“SKYFOOD”), for use only
in the continen tal United States (collectively, “Products” or singularly, “Prod uct”), a re
warran ted to be free from defects in materials an d workmanship for a period of one (1)
yea r from the date of purchase by the original purchaser/user (“End User”), or eighteen
(18) months from the date of shipment from SKYFOOD’s warehouse, whichever expires
first. Several new products and accessories may be warr anted for a p eri od o ther tha n o ne
(1) year whil e others may be subject to travel li mitations, as spe cified on the products
Instruction Manual. Proof of purcha se must be presented; if not this wa rra nty will be
VOID. No warranty is given or imp lie d to a subsequent transferee or any other third party.
Thi s warranty is expressly conditional up on SKYFOOD being notified of any defects in
materials or workmanship with in five (5) days of its occurrence, wi thin the warranted time
period. If a n otice of a claim under this warranty is timel y made by the End User,
SKYFO OD or a SK YFOOD’s design ated service company (“Service Company”), will rep air
or replace the Product, at SKYFOOD’s discretion, subject to the a dditional conditions
hereinafter described.
Thi s warranty shall not apply if damage occurs from improper installation or maintenance
performed b y an unauthorized service co mpany (“Service Company”), wrong voltage, nor
to the extent that Products or parts have been used other than in conformance with
operating and maintenance instructions, subjected to misuse or a buse or dama ged by
accident, acts of God, a bnormal use, stress or any other matter unrelate d to SKYFOOD,
and beyond its reasonable control. This w arranty does NOT cover s ervic e labor and
tra ve l to perform adjustments on products and/or accessories. In addition to wear and
tear of certain items, such as, but not limited to; glass parts, blades, stones, ch opp er
cutting knives, plates, slicing knives, cutting disc, gaskets, oil changes, sealing tape, heat
seal wires, worm gears, self-lubricating bushings, carbon brushes for electric motors, a nd
other parts exp endable by nature and that nee d to be replaced frequently. Electrical
components are subject to na tural wear and tear, and are NOT covered by this
warranty. THIS WARRANTY EXCLUDES ALL ORAL, STATUTORY, EXPRESS OR
IMPLIED WARRANTIES WHICH MAY BE APPLICABLE TO SKYFOOD, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY AND
FITNESS FOR PARTICULAR PURPOSE. Under no circumstances shall SKYFOOD be
liable for loss of use, re venue o r profit or for incidental or consequential dama ges.
SKYFO OD shall un der no circumstances be liable for any loss, damage, concealed
damage, expense or d ela y of goods for any reason when said goods are in th e custod y,
possession or con trol of third parties selected by SKYFOOD to forward, e nter, clear,
transport, or ren der other services with respect to such goods. The sole and e xclusive
remedy for breach of any warranty is limited to the remedies provided in the paragra ph
above.
All products held at non-comme rcial facilities o r domiciles, mu st be taken or shipped,
shipping charges prepaid, either to SKYFOOD's facility or a SKYFOOD's designated
service company ("Service Company"). Products held at comme rcial facilities and weighing
03
6-General Safety Practices
IMPORTANT
If any item from the GENERAL SAFETY NOTIONS section is not applicable to
your product, please disregard it.
The following safety instructions are addressed to both the operator of the
machine as well as the person in charge of maintenance.
The machine has to be delivered to the operator in perfect conditions of use by
the Distributor to the user. The user shall operate the machine only after being well
acquainted with the safety procedures described in the present manual. READ THIS
MANUAL WITH ATTENTION.
Basic Operation Practices
Dangerous parts
Some parts of the electric devices are connected to high voltage points.
These parts when touched may cause severe electrical shocks or even be fatal.
Never touch commands such as buttons, switches and knobs with wet hands, wet
clothes and/or shoes. By not following these instructions operator could be exposed to
severe electrical shocks or even to a fatal situation.
Warnings
The operator has to be well familiar with the position of ON/OFF Switch to make
sure the Switch is easy to be reached when necessary. Before any kind of maintenance,
physically remove plug from the socket.
Provide space for a comfortable operation thus avoiding accidents.
Water or oil spilled on the floor will turn it slippery and dangerous. Make sure the floor is
clean and dry.
Before giving any manual command (switch, buttons, turn keys or lever) be sure
the command is the correct one. Check this manual for further details if necessary.
Never use a manual command (switch, buttons, lever) unadvisedly.
If any work is to be made by two or more persons, coordination signs will have to be given
for each operation step. Every step of the operation shall be taken only if the sign has
been made and responded.
Advices
In case of power shortage, immediately turn the machine OFF.
Use recommended or equivalent lubricants, oils or greases.
Avoid mechanical shocks as they may cause failures or malfunction.
Avoid penetration of water, dirt or dust into mechanical or electrical components
of the machine.
DO NOT modify original characteristics of the machine.
DO NOT remove, tear off or maculate any labels stuck on the machine. If any
label has been removed or is no longer legible, contact your nearest dealer for
replacement.
04
SAFETY PROCEDURES AND NOTES BEFORE SWITCHING ON
7 ELECTRICAL DIAGRAM
IMPORTANT
Carefully read ALL INSTRUCTIONS of this manual before turning the machine ON.
Be sure to be familiar with the instructions and that you have well understood all
information contained in this manual. If you have any question contact your
supervisor or your nearest Dealer.
Danger
An electric cable or electric wire with damaged jacket or bad insulation could
cause electrical shocks as well as electrical leak. Before use, check conditions of all
wires and cables.
Advices
Be sure ALL INSTRUCTIONS in this manual have been thoroughly understood.
Every function and operational procedure have to be very clear to the operator.
Contact your nearest Dealer for further questions.
Any manual command (switch, button or lever) shall be given only after being
sure it is the correct one.
Precautions
The electric cable has to be compatible with the power required by the machine.
Cables touching the floor or close to the machine need to be protected against short
circuits.
AFTER THE WORK ENDS
Cares
Always clean the machine, to do the cleaning SWITCH IT OFF, AND TAKE
OUT THE PLUG FROM THE ELECTRICITY SUPPLY SOCKET .
Never clean the machine BEFORE IT IS COMPLETELY STOPED.
Fit all the machine components in their due places, before switching it on
again.
MAINTENANCE
Dangers
Any maintenance is dangerous if made with the machine switched on.
SWITCH IT OFF AND TAKE OUT THE PLUG FROM THE SOCKET, DURING
ALL THE MAINTENANCE OPERATION.
IMPORTANT
In any emergency situation, always take the plug out of its socket.
ADVICES
Electrical or mechanical maintenance shall be made by qualified persons.
The person in charge of the maintenance performances shall check the machine works
under TOTAL SAFETY CONDITIONS.
05
06
Open as PDF
Similar pages