MikroTik RB750GL Datasheet

-
OmniTIK U-5HnD
Dual polarization outdoor AP, perfect for SXT
Omnitik is available!
RouterBOARD 750GL
Webfig Design Skin
RouterBOARD 711-2Hn
SXT MFM reflector
MAX L2MTU feature
HT extension channel option changed
RouterBOARD 750GL
Our lowest cost Gigabit device
OmniTIK is a weatherproof outdoor
AP with dual-polarized omni
antennas - the perfect companion
for our SXT, or for any other 5GHz
802.11a/n standard device.
Weatherproof, durable and ready
to use. It has five 10/100 Ethernet
ports, PoE support and a built-in
400mW 802.11a/n wireless radio. It
supports Nv2 TDMA technology with
up to 200Mbit aggregate throughput.
LED signal indicators on it’s back
are fully customisable, show
Ethernet activity or wireless signal
- or any other information from
RouterOS.
The USB port gives the ability to
connect a 3G modem or a storage
drive. Suggested price only $119
The RB750GL is a small SOHO router in a white plastic
case. It has five independent Gigabit Ethernet ports and
optional switch chip functionality for wire speed Gigabit
throughput.
It’s probably the most affordable MPLS capable Gigabit
router on the market and now it is even more affordable
than before. Compared to the previous model, the
RB750GL has almost the same performance, but is
significantly lower cost, only $59.95!
With it’s compact design and clean looks, it will fit
perfectly into any SOHO environment.
CPU
Memory
Boot loader
Data storage
Ethernet
LEDs
Powering
Dimensions
Atheros AR7241 400MHz network processor
32MB DDR SDRAM onboard memory
RouterBOOT
64MB onboard NAND memory chip
Five 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X, L2MTU
frame size up to 2030
Wireless Built-in 5GHz 802.11a/n 2x2 MIMO, up to 26dBm
Two 7.5dBi (+/-1dBi) omni with different polarities
(ch0 horizontal, ch1 vertical polarization)
Reset button, Beeper, USB 2.0 port, Voltage and Temperature
monitors
5 programmable LEDs (Ethernet by default), one power LED
Passive 9-30V PoE only. 16KV ESD protection on RF port
368x125x55mm, 520g
Oper.temp
-30C to +70C
OS
MikroTik RouterOS v5, Level4 license
Wireless
Antenna
Extras
Box contains OmniTIK unit, mounting bracket, hose clamp, PoE injector, 24V
power adapter
Newsletter #032. July, 2011
The device will be available at our distributors within the
next few weeks.
CPU
Memory
Boot loader
Data storage
Ethernet
Atheros AR7242 400MHz network processor
64MB DDR SDRAM onboard memory
RouterBOOT
64MB onboard NAND memory chip
Five 10/100/1000 Mbit/s Gigabit Ethernet ports
with Auto-MDI/X, L2MTU frame size up to 4074
Extras
Reset switch, Beeper, Voltage monitor, Temp. monitor
LEDs
5 Ethernet LEDs, power, user (configurable)
Power options Passive 9-30V PoE, Power Jack 9-30V
Consumption ~6W
Dimensions
113x89x28mm. Weight without packaging and cables: 129g
Oper. temp.
-30C to +70C
OS
MikroTik RouterOS v5, Level4 license
Package
RB750GL, 12V power adapter
1/3
Webfig skin mode
RouterBOARD Groove 5Hn
$69
Incl. power adapter, PoE injector, mounting loops
The Groove is our smallest outdoor series
model - a fully featured RouterBOARD
powered by RouterOS. Weatherproof,
durable and ready to use. It has one 10/100
Ethernet port with PoE support and a builtin 200mW 802.11a/n wireless radio. With
the Nv2 TDMA technology, up to 125Mbit
aggregate throughput is possible!
unchecking and renaming of elements
RouterOS v5.3 introduces a new possibility - editing
of Webfig interface elements. This opens many new
possibilities - translation, customization, hiding of features
and making the interface easier to use.
It has a built-in N-male connector, and
pole attachment points, so you can attach
it to an antenna directly, or use a standard
antenna cable. LED signal indicators make
it easy to install and align.
Simply click the “Design Skin” button to enter the design
mode. You can now rename any interface element,
uncheck them to hide, and also add notes, impose limits
for text fields, and make some fields “read only”. Once you
are done editing, you can enter a new name for your new
skin, and click “Save”.
Currently two versions are available:
Groove 5Hn and Groove A-5Hn.
You can do several things now - copy the “name.json” file
from the files folder to other devices, or put up on our wiki
for sharing with others, or more importantly - make a new
user group in the system menu, and assign this skin to
this specific group. Make sure to uncheck “policy” so that
the users of this new group can’t change the skin back to
what it was.
Both of them can be used as clients or for
point-to-point links, but Groove A-5Hn can
also be used as an Access Point.
Groove runs RouterOS with all it’s features.
Groove 5Hn is just $69
Groove A-5Hn is just $89
Please note that this is not a security measure, and Skins
only make the interface appear simplified.
CPU
Memory
Data storage
Ethernet
Wireless
Extras
LEDs
Power options
Consumption
Dimensions
a changed interface, to show only some basic settings
Newsletter #032. July, 2011
Atheros AR7241 400MHz network processor
32/64MB DDR SDRAM onboard memory
64MB onboard NAND memory chip
One 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X,
L2MTU frame size up to 2030 bytes
Wireless Built-in 5GHz 802.11a/n 1x1 MIMO,
N-male connector
Reset switch, Beeper, Voltage monitor, Temperature monitor
5 wireless signal LEDs, ethernet activity LED (configurable)
Passive 9-30V PoE only. 16KV ESD protection on RF port
Oper. temp
Up to 0,19A at 24V (4.56W)
177x44x44mm, 193g.
Must be mounted with ethernet pointing down
-30C to +70C
OS
MikroTik RouterOS v5, L3/4 license (station or point-to-point)
Package
Groove unit, mounting loops, PoE injector, 24V power adapter
2/3
RouterBOARD 711-2Hn
Possibilities are endless with SXT
The popular RB711 is now available also in 2GHz! It has
the same features and specifications as the RB711-5Hn,
but it is 2GHz 802.11b/g/n instead.
RB711 is a small CPE type RouterBOARD wireless
router with an integrated wireless card (5 or 2GHz),
capable of up to 27dBm transmit power output (the
2GHz model). It has uilt in 16kV ESD protection on RF
port. The perfect device for CPE builders!
RB711 includes RouterOS - the operating system, which
can be a router, firewall, bandwidth manager, a CPE and
more - all at the same time.
Wireless option changed
To simplify wireless configuration and to avoid confustion
between some options, since v5.3 we have merged htextension-channels in to the channel-width option.
What was previously called 40MHz, is now called
40MHz-turbo (for non-N cards) and for 802.11n cards,
the HT extension channel is now called “20/40MHz
Above” and “20/40MHz Below” and they are now only
available in the channel-width setting.
Our Made for Mikrotik program offers you to choose
3rd party accessories for MikroTik devices made by our
partners. One of such devices is the Reflector Antenna
for SXT made by SS&T in Ukraine. It changes the 25
degree beamwidth of SXT to 5 degrees, promising
increased range by up to 7 kilometers. This is a great
idea for a price of around 40Eur.
Read more on their webpage at www.sstua.com
MAX L2MTU
We have added a new read-only parameter for
interfaces which support changing of the L2MTU
setting - “max-l2mtu”. This makes it easy to determine
the maximum supported L2MTU value for a particular
interface.
New RouterBOARD models have large supported
L2MTU values which make it easier to achieve better
throughput because of less fragmentation. Perfect for
q-in-q, MPLS, IPIP, EoIP - no overhead means better
performance.
Read more about L2MTU un RouterBOARD devices on
our wiki page dedicated to this topic: L2MTU
Newsletter #032. July, 2011
3/3
Open as PDF
Similar pages