Video Door Phone·User Manual
Video Door Phone
Door Station and Indoor Station
User Manual
UD01857B
i
Video Door Phone·User Manual
User Manual
© 2016 Hangzhou Hikvision Digital Technology Co., Ltd.
This user manual is intended for users of the models below:
Series
Model
Door Station
DS-KB2411-IM
Indoor Station
DS-KH2200
It includes instructions on how to use the Product. The software embodied in the
Product is governed by the user license agreement covering that Product.
About this Manual
This Manual is subject to domestic and international copyright protection. Hangzhou
Hikvision Digital Technology Co., Ltd. (“Hikvision”) reserves all rights to this manual. This
manual cannot be reproduced, changed, translated, or distributed, partially or wholly, by
any means, without the prior written permission of Hikvision.
Trademarks
and other Hikvision marks are the property of Hikvision and are
registered trademarks or the subject of applications for the same by Hikvision and/or its
affiliates. Other trademarks mentioned in this manual are the properties of their
respective owners. No right of license is given to use such trademarks without express
permission.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HIKVISION MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THIS MANUAL.
HIKVISION DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE
USE OF THE MANUAL, OR THE CORRECTNESS, ACCURACY, OR RELIABILITY OF INFORMATION
CONTAINED HEREIN. YOUR USE OF THIS MANUAL AND ANY RELIANCE ON THIS MANUAL SHALL BE
WHOLLY AT YOUR OWN RISK AND RESPONSIBILITY.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL HIKVISION, ITS
DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES
FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, SECURITY BREACHES, OR LOSS OF DATA
OR DOCUMENTATION, IN CONNECTION WITH THE USE OF OR RELIANCE ON THIS MANUAL, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY OR CERTAIN
DAMAGES, SO SOME OR ALL OF THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU.
Support
Should you have any questions, please do not hesitate to contact your local dealer.
0100001060617
ii
Video Door Phone·User Manual
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss.
The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.
Warnings Follow
these safeguards to
prevent serious
injury or death.
Cautions Follow these
precautions to prevent
potential injury or
material damage.
Warnings
 All the electronic operation should be strictly compliance with the electrical safety
regulations, fire prevention regulations and other related regulations in your local
region.
 Please use the power adapter, which is provided by normal company. The power
consumption cannot be less than the required value.
 Do not connect several devices to one power adapter as adapter overload may cause
over-heat or fire hazard.
 Please make sure that the power has been disconnected before you wire, install or
dismantle the device.
 When the product is installed on wall or ceiling, the device shall be firmly fixed.
 If smoke, odors or noise rise from the device, turn off the power at once and unplug
the power cable, and then please contact the service center.
 If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the device yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
Cautions
 Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnetism radiation. Avoid the equipment installation on vibrations surface or
places subject to shock (ignorance can cause equipment damage).
 Do not place the device in extremely hot (refer to the specification of the device for
the detailed operating temperature), cold, dusty or damp locations, and do not
expose it to high electromagnetic radiation.
 The device cover for indoor use shall be kept from rain and moisture.
iii
Video Door Phone·User Manual
 Exposing the equipment to direct sun light, low ventilation or heat source such as
heater or radiator is forbidden (ignorance can cause fire danger).
 Do not aim the device at the sun or extra bright places. A blooming or smear may
occur otherwise (which is not a malfunction however), and affecting the endurance of
sensor at the same time.
 Please use the provided glove when open up the device cover, avoid direct contact
with the device cover, because the acidic sweat of the fingers may erode the surface
coating of the device cover.
 Please use a soft and dry cloth when clean inside and outside surfaces of the device
cover, do not use alkaline detergents.
 Please keep all wrappers after unpack them for future use. In case of any failure
occurred, you need to return the device to the factory with the original wrapper.
Transportation without the original wrapper may result in damage on the device and
lead to additional costs.
 Improper use or replacement of the battery may result in hazard of explosion.
Replace with the same or equivalent type only. Dispose of used batteries according to
the instructions provided by the battery manufacturer.
iv
Video Door Phone·User Manual
Table of Contents
1 Introduction ................................................................................................. 1
1.1 Overview.................................................................................................................. 1
1.2 Features ................................................................................................................... 1
2 Appearance Description ............................................................................... 2
2.1 Indoor Station .......................................................................................................... 2
2.2 Door Station............................................................................................................. 2
3 Terminals and Interfaces .............................................................................. 3
4 Installation and Wiring ................................................................................. 4
4.1 Indoor Station Installation ....................................................................................... 4
4.1.1 Wall Mounting Plate (Indoor Station) ............................................................... 4
4.1.2 Wall Mounting (Indoor Station) ........................................................................ 4
4.2 Door Station Installation .......................................................................................... 6
4.2.1 Wall Mounting Shield (Door Station) ................................................................ 6
4.2.2 Wall Mounting (Door Station) ........................................................................... 6
4.3 Wiring Description ................................................................................................... 8
4.3.1 Wiring 1 (1 Door Station and 1 Indoor Station)................................................. 8
4.3.2 Wiring 2 (1 Door Station and 3 Indoor Stations) ............................................... 8
4.3.3 Wiring 3 (2 Door Stations and 3 Indoor Stations) ............................................. 9
5 Local Operation .......................................................................................... 11
5.1 Door Station Local Operation ................................................................................ 11
5.2 Indoor Station Local Operation .............................................................................. 11
Appendix ...................................................................................................... 12
Box Content ................................................................................................................. 12
Installation Notice ....................................................................................................... 12
Specification ................................................................................................................ 12
Specification of DS-KH2200 ...................................................................................... 12
Specification of DS-KB2411-IM ................................................................................ 13
v
Video Door Phone·User Manual
1 Introduction
1.1 Overview
The video door phone is composed of a
four-wire indoor station and a four-wire
door station. Featuring in the convenient
installation and easy operation, it is mainly
applied in the buildings for improving the
living security.
1.2 Features
Indoor Station Features
 Hands-free video intercom communication
 Supports three indoor stations simultaneously in the intercom system
 Supports monitoring the door station and the external analog camera
 Remote unlocking
 Convenient installation and easy operation
Door Station Features
 Hands-free video intercom communication
 Supports two door stations simultaneously in the intercom system
 Self-adaptive IR supplement (with photoresistor)
 One-touch calling
 Pinhole camera with 720 x 576 @ 25 fps
 Unlock controlling
 Anti-oxidant aluminium alloy
 Convenient installation and easy operation
1
Video Door Phone·User Manual
2 Appearance Description
2.1 Indoor Station
Table 2-1 Components Description
No.
Description
1
Power Supply Indicator
2
Call Accept/Decline Key
3
Unlock Key
4
Live View Key
5
Switch Key
6
LCD Display Screen
7
Microphone
8
Terminals and Interfaces
9
Loudspeaker
10
Volume Control Knob
Figure 2-1 Indoor Station Appearance
2.2 Door Station
Table 2-2 Components Description
Figure 2-2 Door Station Appearance
2
No.
Description
1
Microphone
2
Built-in Camera
3
IR Supplement Lights
4
Photoresistor
5
Call Button
6
Loudspeaker
Video Door Phone·User Manual
3 Terminals and Interfaces
Figure 3-1 Terminals of Indoor Station
Figure 3-2 Terminals of Door Station
Table 3-1 Descriptions of Terminals and Interfaces (Indoor Station)
Name
No.
Interface
Description
Camera
1
CAM
Analog Camera Access
Power Supply
Four-Wire
Interface
2
12 VDC
12 VDC Power Supply Input
A1/B1/C1/D1
B1+/B2+
Power Supply for Door Station
A2/B2/C2/D2
V1/V2
Video Input
A3/B3/C3/D3
A1/A2
Audio Input/Output
A4/B4/C4/D4
G
Grounding Signal
Table 3-2 Descriptions of Terminals and Interfaces (Door Station)
Name
Four-Wire
Interface
Lock
No.
Interface
Description
E1
G
Grounding Signal
E2
A
Audio Input/Output
E3
V
Video Output
E4
B+
Power Supply (from Indoor Station)
F1
NC
Door Lock Relay Output/Normally Closed
F2
COM
Door Lock Relay Output/Common
F3
NO
Door Lock Relay Output/Normally Open
3
Video Door Phone·User Manual
4 Installation and Wiring
Before you start:
 Make sure the device in the package is in good condition and all the assembly parts
are included (See Box Content).
 The power supply the indoor station supports is 12 VDC. Please make sure your
power supply matches your indoor station.
 Make sure all the related equipment is power-off during the installation.
 Check the specification of the product for the installation environment.
4.1 Indoor Station Installation
4.1.1 Wall Mounting Plate (Indoor Station)
127 mm
102 mm
60 mm
33 mm
46.4 mm
100 mm
2 mm
Figure 4-1 Wall Mounting Plate
 Two ways of installation are for reference: installation with junction box, and
installation without junction box.
 If you refer to the installation with junction box, the dimension of junction box should
be 75 mm (width) x 75 mm (length) x 50 mm (depth).
4.1.2 Wall Mounting (Indoor Station)
Steps:
1. Insert the junction box to the hole chiseled on the wall.
2. Fix the wall mounting plate to the junction box with 2 screws.
4
Video Door Phone·User Manual
Wall Mounting Plate
Screws
Junction
Box
Figure 4-2 Installing the Plate
3. Hook the indoor station to the wall mounting plate tightly by inserting the plate hooks
into the slots on the rear panel of the indoor station, during which the lock catch will
be locked automatically.
Lock Catch
Hooks
Slot
Slot
Figure 4-3 Hooking the Indoor Station to the Plate
For the installation without the junction box, you should fix the wall mounting plate to
the wall with 2 expansion screws first, and then hook the indoor station.
5
Video Door Phone·User Manual
4.2 Door Station Installation
4.2.1 Wall Mounting Shield (Door Station)
48.83 mm
26.25 mm
134.5 mm
29.08 mm
19.12 mm
41.78 mm
7.6 mm
12±0.05 mm
28.02 mm
Figure 4-4 Wall Mounting Shield
4.2.2 Wall Mounting (Door Station)
Steps:
1. Fix the wall mounting shield to the wall with 3 screws.
Wall Mounting Shield
Screws
Figure 4-5 Installing the Shield
2. Hook the door station to the shield tightly by inserting the hooks of shield panel into
the slots on the rear panel of the door station.
6
Video Door Phone·User Manual
Wall Mounting
Shield Panel
Door Station
Rear Panel
Hooks
Slots
Figure 4-6 Hooking the Door Station to the Shield
3. Secure the door station with the mounting shield with the set screw.
Set Screw
Figure 4-7 Securing the Door Station
7
Video Door Phone·User Manual
4.3 Wiring Description
4.3.1 Wiring 1 (1 Door Station and 1 Indoor Station)
Analog Camera
Electric Bolt
Indoor Station
B+ — Wire for power supply
V — Wire for video input
A — Wire for audio input/output
G — Wire for grounding
Door Station
Figure 4-8 Wiring 1 (1 Door Station and 1 Indoor Station)
4.3.2 Wiring 2 (1 Door Station and 3 Indoor Stations)
Electric Bolt
Analog Camera 3
Indoor
Station 3
Analog Camera 2
Indoor
Station 2
Analog Camera 1
Indoor
Station 1
Door
Station
B+ — Wire for power supply
V — Wire for video input
A — Wire for audio input/output
G — Wire for grounding
Figure 4-9 Wiring 2 (1 Door Station and 3 Indoor Stations)
8
Video Door Phone·User Manual
4.3.3 Wiring 3 (2 Door Stations and 3 Indoor Stations)
Electric
Bolt 1
Electric
Bolt 2
Analog Camera 3
Indoor Station 3
Analog Camera 2
Indoor Station 2
Analog Camera 1
Door
Station 2
Indoor Station 1
Door
Station 1
B+ —Wire for power supply
V —Wire for video input
A —Wire for audio input/output
G — Wire for grounding
Figure 4-10 Wiring 3 (2 Door Stations and 3 Indoor Stations)
 According to different transmission distances among door stations and indoor
stations, different RVV4 cable specifications are demanded.
Transmission Distance (TD)
RVV4 Cable Specification
TD ≤ 10 m
RVV4 * 0.2 mm ^2
10 m < TD ≤ 30 m
RVV4 * 0.5 mm ^2
30 m < TD ≤ 50 m
RVV4 * 0.75 mm ^2
50 m < TD ≤ 100 m
RVV4 * 1.5 mm ^2
 Up to 2 door stations are supported simultaneously in the intercom system.
 Up to 3 indoor stations are supported simultaneously in the intercom system.
 DS-2CE16A2P-IT3 (6mm) analog camera is recommended to connect to the indoor
station.
9
Video Door Phone·User Manual
 On the rear panel of the indoor station,
four-wire interface A and four-wire
interface C are composed of a cascading
group; and four-wire interface B and
four-wire interface C are composed of a
cascading group.
 The communication between A and B/D
cannot be realized.
 The communication between C and B/D
cannot be realized.
Do not connect the power wire of the four-core cable to the V pin (video input) or A pin
(audio input/output) of the four-wire interface.
10
Video Door Phone·User Manual
5 Local Operation
5.1 Door Station Local Operation
Steps:
Press the call button to call the resident.
When press the call button to call the
resident, the maximum ring duration of
the indoor station is 30s.
Figure 5-1 Call Button of Door Station
5.2 Indoor Station Local Operation
Table 5-1 Indoor Station Local Operation Description
Keys
Description
Accept or decline the incoming call.
Unlock the door.
Open or close the live view.
Switch the live view among the first door station, the second door station,
and the analog camera.
Increase the volume.
Counterclockwise rotation
Decrease the volume.
Clockwise rotation
 The maximum live view duration is 60s; and the maximum speaking duration is 60s.
 During the ring duration, speaking duration, or live view duration, the resident can
unlock the door. The unlocking status can maintain 5 seconds after pressing the
Unlock key.
 To achieve the optimal pickup effect, the recommended distance range between the
speaker and the microphone of the indoor station or the door station is 30 to 40 cm.
11
Video Door Phone·User Manual
Appendix
Box Content
Door Station
x1
Mounting Shield
x1
Mounting Plate
x1
Indoor Station
x1
User Manual
Power Adapter
x1
5 m Four-Core
Cable x1
10 cm Three-Core
Cable x1
Screws
x6
User Manual
x1
Installation Notice
While installing the indoor station, make sure that the distance between any two
devices is far enough to avoid the howling and echo. The distance between two devices
is recommended to be longer than 10 meters.
Here devices refer to indoor stations, and door stations.
Specification
Specification of DS-KH2200
Model
Parameters
DS-KH2200
Display parameters
Display screen
7-Inch Colorful TFT LCD
12
Video Door Phone·User Manual
Resolution
800 × 480
Operation method
Physical Button
Audio parameters
Audio input
Build-in Omnidirectional Microphone
Audio output
Build-in Loudspeaker
Audio quality
Noise Suppression and Echo Cancellation
Device interfaces
4 Four-Wire Interfaces
Four-wire interface
1-ch Video Input, 1-ch Audio Input/Output, 1-ch Power
Supply, 1-ch Grounding
General
Power supply
12 VDC
Power consumption
Max. 5W
Working temperature
-10° C to +55° C (14° F to 131° F)
Working humidity
10% to 90%
Dimension (L x W x H)
195.8 mm × 132.8 mm × 18.39 mm (7.7" × 5.2" ×0.7")
Specification of DS-KB2411-IM
Model
Parameters
DS-KB2411-IM
Video parameters
Camera
1/4" CMOS
Resolution
720 x 576
Video frame rate
PAL: 25 fps
Audio parameters
Audio input
Built-in Omnidirectional Microphone
Audio output
Built-in Loudspeaker
Audio quality
Noise Suppression and Echo Cancellation
Light supplement
Light supplement mode
Photosensitive IR Supplement, IR Range: 2 Meters
Device interfaces
Four-wire interface
1 Four-Wire Interface (1-ch Video Input, 1-ch Audio
Input/Output, 1-ch Power Supply, 1-ch Grounding)
13
Video Door Phone·User Manual
I/O output
1 Relay Output
General
Material
Aluminum Alloy
Power consumption
Max. 3W
Working temperature
-30° C to +60° C (-22° F to 140° F)
Working humidity
10% to 90%
Dimension (L x W x H)
128 mm × 42 mm × 24.8 mm (5.0" × 1.7" × 0.9")
14
Video Door Phone·User Manual
15
Open as PDF
Similar pages