paso catalogue - Thorvin Electronics

3000 SERIES
4 INPUT CHANNEL - BGM/FGM INTEGRATED AMPLIFIERS
Absolute Performance - The Series 3000 is an
extremely versatile line of Integrated Amplifiers. The
unique features provided in all models are easily adaptable to most sound applications. The numerous connectivity possibilities, indicate the powerful functions
available and stimulate the creativity of the designing
applications engineer on providing the best and the
most cost effective solution for a given project. The
most popular series selected for music background applications. Proven field reliability in thousands of installations. Trouble-free continuous operation under extreme
environmental conditions. Total versatility meets most
demanding applications for music, paging and music or
messaging on hold. The Amplifier is fully protected
against overloads and short circuit with automatic reset
in case of a short or overload. Rack mounting is possible
by using the optional Rack Kit available as an accessory
(see accessories).
o ULTRA WIDE POWER BANDWIDTH
o VERY LOW DISTORTION CHARACTERISTICS
o HIGH RELIABILITY/EXCEPTIONAL PERFORMANCE
o 4 CHANNEL INPUTS - 2 ZONE OUTPUTS
o BUILT-IN TELEPHONE PAGING INTERFACE
o BALANCED MICROPHONE INPUT
o PHANTOM POWER ON MIC INPUT
o BALANCED PROGRAM INPUT
o BUILT-IN JUKEBOX SWITCHER
o INDEPENDENT PHONE PAGING LEVEL CONTROL
o AUX INPUT WITH STEREO SUMMING
o AUX INPUT WITH SENSITIVITY CONTROL
M O D E L S
o MUSIC ON HOLD 600 OHM BALANCED OUTPUT
T3115BGM - 15 W INTEGRATED AMPLIFIER
o INDEPENDENT MOH & 2ND ZONE OUTPUT
T3130BGM - 30 W INTEGRATED AMPLIFIER
o ZONE 2 - 1 WATT 8 OHM OUTPUT
o ADDRESSABLE VOX - VOICE ACTIVATED MUTING
27/3500 - Standard 19" Rack
Mounting Kit. Complete with
hardware. Black Finish. 2 Units
of Rack vertical space.
PAGE 2
o DIRECT MUTING AND UNMUTING
o POWER SURGE AND OVERLOAD PROTECTION
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
EXCEPTIONAL RELIABILITY - OUTSTANDING SONIC PERFORMANCE
FEATURES AND FUNCTIONS
INPUT 1
Microphone Input
Low Impedance Microphone Input. Impedance is 250 ohm balanced
and this input can be muted or unmuted (see Muting/Unmuting
function).
INPUT 2
Telephone Paging Input
Input 2 provides Telephone Paging Interface. Input Impedance is 600
ohm Transformer balanced. A rear panel Output Level Control is provided..
INPUT 3
Auxiliary Input
Input 3 can be AUX, CD or SATELLITE RECEIVER Input.The AUX Input
impedance is 47K ohm unbalanced.
INPUT 3 ATTENUATOR
A rear panel Variable Attenuator is provided to set the Sensitivity
Threshold of this input. By adjusting the Attenuator the sensitivity
may be changed from 100 Mv to 5 Volt.
STEREO SUMMING - Two separate RCA Jacks are provided
for Input 3 (Left and Right). A Stereo signal connected to either Input is buffered and internally summed to Mono.
INPUT 4
Program Input
Balanced Program Input may be used as a Satellite Receiver
Input, Message Repeater Input or Line Input.
CONTROLS
Front Panel Controls - Microphone, Auxiliary, Program, Bass
and Treble
FOR ADDITIONAL INFORMATION SEE THE INDIVIDUAL ENGINEERING DATA BROCHURE
Rear Panel Controls - Telephone Output Level, AUX Attenuator and MOH/ZONE 2 Output Level.
VOX - Voice Activated Muting - The VOX Muting System is
activated by the Microphone Input or the Telephone Input
and mutes the AUX and PROGRAM Inputs.
ADDRESSABLE VOX - The AUX INPUT and the PROGRAM
INPUT may be Muted or not Muted by internal Jumper. If the
MUTE is ON (can be selected independently for AUX and PROGRAM) a Page from the Microphone or Telephone will mute
either the AUX or the PROGRAM INPUT or both.
DIRECT UNMUTING - The MICROPHONE Input can be set to be
normally MUTED (by internal jumper) until activated by contact closure of the UNMUTE and G Terminals.
MUSIC ON HOLD OUTPUT - Provides a 1 Volt, 600 ohm, Transformer balanced output for Music/Message on Hold. Internal
jumper selects the source from either Aux Input or Program
Input. Level Control is provided. Not affected by paging or
muting.
ZONE 2 OUTPUT - Provides a 1 Watt, 8 ohm output for Zone 2
Speaker Output. Internal jumper selects the source from either Aux Input or Program Input. Level Control is provided.
Not affected by paging or muting.
AC ACCESSORY OUTLET - 500 Watt unswitched.
ACCESSORIES
27/3500 - Standard 19" Rack Mounting Kit. Complete with hardware. Black Finish. Occupies two units of vertical rack space.
PAGE 3
DMA SERIES
4 INPUT CHANNEL - PROFESSIONAL INTEGRATED AMPLIFIERS
Absolute Reliability - The DMA SERIES is like no
other Amplifier Line. Every component utilized is HeavyDuty. Built tough to take the daily punishment required
for continuous operation. DMA delivers Outstanding
Sonic Performance at any level of rated power and with
any Speaker System Load. Breakthrough Technology is
applied to every critical Circuitry from Power Surge Protection and Speed Controlled Fans for Thermal Protection to massive High Current Power Supplies. The Load
Management System has the ability to adapt the power
transfer to specific speaker loads. By delivering more
current on demand to the Output Stages when Peak
Power is needed the Amplifier will automatically provide
the additional Reserve Headroom required. Sound purity
is maintained with lower distortion for “Heavier Bass”
and “Clearer Highs”. Four models from 15 Watt to 120
Watt.
M O D E L S
o ULTRA WIDE POWER BANDWIDTH
o VERY LOW DISTORTION CHARACTERISTICS
o HIGH RELIABILITY/EXCEPTIONAL PERFORMANCE
o ADDRESSABLE VOX AND MUTING SYSTEM
o INDEPENDENT MOH & 2ND ZONE OUTPUT
o INTELLIGENT INPUT/OUTPUT VERSATILITY
o AUTOMATIC LOAD MANAGEMENT SYSTEM
o 24 VOLT DC AUXILIARY POWER SUPPLY
DMA2015 - 15 W INTEGRATED AMPLIFIER
o POWER SURGE AND OVERLOAD PROTECTION
DMA2030 - 30 W INTEGRATED AMPLIFIER
o BUILT-IN JUKEBOX SWITCHER
DMA2060 - 60 W INTEGRATED AMPLIFIER
o BUILT-IN ZONE PAGING SYSTEM
DMA2120 - 120 W INTEGRATED AMPLIFIER
o BUILT-IN TELEPHONE PAGING INTERFACE
DMA SETS NEW STANDARDS FOR DIGITAL MUSIC REPRODUCTION
PAGE 4
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
EXCEPTIONAL RELIABILITY - OUTSTANDING SONIC PERFORMANCE
Input 1 is a Microphone Input. Impedance is 250 ohm electronically balanced.
Input 2 is Phone Paging to interface with a Phone System. Input Impedance is 600 ohm, Transformer Balanced. A level control is available on the Front Panel.
Addressable VOX System - The VOX System can be individually selected to operate independently
on all 4 Inputs.
Addressable Muting System - All Inputs may be set to be Muted when the Vox is activated.
Phantom Power - Provided on all Inputs set as MIC provided for Input 3 and 4 (Left and Right).
A Stereo signal connected to either Input is buffered and internally summed to Mono.
Input 3 & 4 Attenuators - When the Inputs are set as AUX 1 and AUX 2 the input sensitivity may
be varied by a rear panel Variable Attenuator. This feature allows to set the output level of Programs originating from different sources (CD, Satellite Receiver, etc.).
MIX BUSS - This Input/Output may be utilized to parallel two amplifiers or as an input for a Microphone Mixer or other audio source. When used as an Input the Amplifier Level and Equalization
Controls have no effect.
Remote Volume Control - The INPUT 3/AUX 1 Input Volume may be adjusted from a remote location. Remote Volume Inputs utilize a 10K Pot and are immune to Audio Interference (DC Operation).
Direct Muting/Unmuting System - The MUTE function may be activated by external contacts.
MIC 1 Input may be set to normally off and turned-on by shorting the Unmute Terminals.
Music on Hold - Output Channel 1- Channel 1 provides a 1 Volt, 600 ohm Transformer Balanced
Output. Internal Jumper selects the source from either AUX 1 or AUX 2. Level Control is provided.
Output Channel 2 - Channel 2 provides a 2 Watt Max., 8 ohm output for Zone 2 Speaker Output.
Internal Jumper selects the source from either AUX 1 or AUX 2. Level Control is provided.
Tone By-Pass Switch - The Tone by-pass switch defeats the setting of the Treble and Bass Controls.
Should be used when an External Equalizer is utilized.
24 VDC Supply Output - A 24 Volt DC, 250 mA regulated Power Supply with dynamic filter is
provided for external accessories.
A C C E S S O R I E S
27/3500 - Standard 19" Rack Mounting
Kit. Complete with hardware. Black Finish. 2 Units of Rack vertical space.
AC3 - Programmable Multi-Tone Chime
Module, Internal Plug-in Card. Mounts
on main printed circuit board of Amplifier. Provides eight Electronic Chime
Tones and Westminster. DIP-Switch Programming and Output Level Trimmer.
Tone is triggered each time the Mute terminals are closed.
FOR ADDITIONAL INFORMATION SEE THE INDIVIDUAL ENGINEERING DATA BROCHURE
PMEQ16B - Internal Plug-in EQ Module.
Mounts on main printed circuit board of
Amplifier. Provides equalization for the
BOSE® System 16 Speaker System.
PMEQ32B - Internal Plug-in EQ Module.
Mounts on main printed circuit board of
Amplifier. Provides equalization for the
BOSE® System 32 Speaker System.
RVC10W - Remote Volume Control for
Amplifiers. Decora Style Plate mounts on
standard single Gang Box. Complete with
mounting hardware. Control Potentiometer: 10 K Ohm • Termination: 4”
Pigtail, stripped and tinned • Dimensions: 4.5” H, 2.75” W, 0.6” Behind Front
Plate. (115X70X16 mm) • Net Weight: 3
oz (0.088 Kg)
PAGE 5
DMAB SERIES
5 INPUT CHANNEL - PROFESSIONAL INTEGRATED AMPLIFIERS
Absolute Versatility - Never before a Series of Amplifiers so ingeniously engineered has been offered to the Modern
Systems Integrator. Addressing the requirements of today’s demanding installations, DMAB meets those needs beautifully,
totally and with innovation and cost effectiveness unequalled by any other competitive system available. The advanced
technology utilized in the electro-mechanical integration of all internal components affords High Performance, Superb
Quality and Extreme Reliability in a rugged, compact package. The Load Management System has the ability to adapt
the power transfer to specific speaker loads. By delivering more current on demand to the Output Stages when Peak
Power is needed the Amplifier will automatically provide the additional Reserve Headroom required. Sound purity is
maintained with lower distortion for “Heavier Bass” and “Clearer Highs”. Five models are available from 15 Watt to 260
Watt in only 2U of Rack space.
CONVERTIBLE INPUTS - PHOENIX CONNECTORS - REAR PANEL PROGRAMMING
M O D E L S
DMA2015B - 15 W INTEGRATED AMPLIFIER
DMA2030B - 30 W INTEGRATED AMPLIFIER
DMA2060B - 60 W INTEGRATED AMPLIFIER
DMA2120B - 120 W INTEGRATED AMPLIFIER
DMA2260B - 260 W INTEGRATED AMPLIFIER
❁ HIGH PERFORMANCE MULTI MEDIA INTEGRATED AMPLIFIERS
❁ VOX ACTIVATED RELAY WITH N0/NC CONTACTS
❁ PHOENIX CONNECTORS
❁ BUILT-IN REMOTE CONTROL ROOM COMBINING SYSTEM
❁ DIP SWITCH REAR PANEL PROGRAMMABLE
❁ BUILT-IN ZONE PAGING SYSTEM
❁ FIVE CHANNEL FULLY ADDRESSABLE INPUTS
❁ AUTOMATIC LEVEL CONTROL/COMPRESSORS ON AUX 2, 3 AND 4
❁ THREE AUX INPUTS - RCA CONNECTORS
❁ WIDE POWER BANDWIDTH AND VERY LOW DISTORTION
❁ 600 OHM TRANSFORMER BALANCED PHONE PAGING INPUT
❁ 2ND 3 WATT 8 OHM ZONE - 3RD 3 WATT 70 VOLT ZONE
❁ ALL CHANNEL REMOTE VOLUME CONTROL CAPABILITY
❁ 24 VOLT DC - 500 MA REGULATED AUXILIARY POWER SUPPLY
❁ MASTER REMOTE VOLUME CONTROL
❁ MUSIC ON HOLD OUTPUT WITH INDEPENDENT LEVEL CONTROL
❁ MULTISOURCE INPUTS CONTROLLER USING CAT 5 CABLING
❁ AUTOMATIC LOAD MANAGEMENT SYSTEM
❁ ALL CHANNEL INPUT SENSITIVITY CONTROL
❁ THERMALLY ACTIVATED VARIABLE SPEED COOLING FAN
❁ PORT FOR INPUT/OUTPUT AUDIO MODULES
❁ BUILT-IN SURGE PROTECTION
PAGE 6
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
PRMS4 - CAT5 INPUT REMOTE
CONTROLLER
PRMS4 - 4-Multi-Source Remote Controller with independent Level Control. Utilizes a CAT5 Socket and
Phoenix Connector for connection to Amplifier. On-Off
Switch and Level Control for each Input. Uses a 4”
Square Backbox. White Plate.
Dimensions: 4.75”X4.75”, 1.5” D.
The optional Model PRMS4 Controller is a cost effective
accessory providing On-Off and Output Level Control
for each of the Amplifier 4 Inputs either independently
or collectively using CAT5 cabling up to a distance of
1000 ft.. Each of the illuminated push-buttons 1-2-3-4
corresponds to the Amplifier Inputs 1-2-3-4. Labels and
additional color lenses for the push-buttons are provided. NOTE: The controls of the PRMS4 do not alter the
Output level set by the MOH - ZONE 1-ZONE 2 Controls.
A C C E S S O R I E S
PM01ML - Microphone/Line Input Module - Amplifier Module for PASO Amplifiers. Mounts on rear panel port. Versatile
Input Module provides balanced Microphone Input switchable
to Line Input. Remote Volume Control capability
• Microphone Input: 250 Ohm Balanced • Sensitivity: 1.5 Mv •
Line Input: 47 K unbalanced • Sensitivity: 100 Mv • Microphone/Line Switch: Slide Switch on PCB • MIC Input Phantom Power: 16 + 16 Volt (PCB Jumper) • MIC Low-Cut Filter:
-10 dB at 100 Hz (PCB Jumper) • Output Level Control: Front
Panel Screwdriver Adjust • Remote Volume Control MIC and
Line: 10 K Pot • Terminations: MIC Input = Screw terminals,
Remote Volume = Screw terminals, LINE/AUX = Dual RCA
Jacks • Dimensions: 1.38” W., x 3” H. x 3” D. (35X78X78
mm) • Net Weight: 5 oz (0.15 Kg)
27/3500 - Standard 19" Rack Mounting Kit.
Complete with hardware. Black Finish. 2 Units
of Rack vertical space.
AC3 - Programmable Multi-Tone Chime
Module, Internal Plug-in Card. Mounts
on main printed circuit board of Amplifier. Provides eight Electronic Chime
Tones and Westminster. DIP-Switch Programming and Output Level Trimmer.
Tone is triggered each time the Mute terminals are closed.
FOR ADDITIONAL INFORMATION SEE THE INDIVIDUAL ENGINEERING DATA BROCHURE
PML1X6 - Line Distribution Amplifier Module - Mounts on
rear panel port. This is an extremely versatile Line Distribution
Module providing one Line Input (L+R) and Six independent
Mono Line Outputs. Ideally suited for Multi-Amplifier Installations and for Music Distribution Systems using one source for
up to six Outputs.
• Input: 47 K unbalanced • Output: 47 K unbalanced • Gain:
Unity • THD: Less than 0.03% at 1 Khz • Frequency Response:
20 - 20,000 hz EQ set flat • Signal to Noise Ratio: > -80 dB
below +4 dBu • Terminations: Input and Output RCA Jack •
Contacts: Internal PCB Contacts • Supply Voltage: 24 VDC, 25
mA internally derived from amplifier • Panel Finish: Black • Dimensions: 1.38” W., x 3” H. x 3” D. (35X78X78 mm) • • Net
Weight: 5 oz (0.15 Kg)
PMEQ16B - Internal Plug-in EQ Module.
Mounts on main printed circuit board of Amplifier. Provides equalization for the BOSE®
System 16 Speaker System.
PMEQ32B - Internal Plug-in EQ Module.
Mounts on main printed circuit board of Amplifier. Provides equalization for the BOSE®
System 32 Speaker System.
RVC10W - Remote Volume Control for Amplifiers. Decora Style Plate mounts on standard
single Gang Box. Complete with mounting
hardware. Control Potentiometer: 10 K Ohm •
Termination: 4” Pigtail, stripped and tinned •
Dimensions: 4.5” H, 2.75” W, 0.6” Behind Front
Plate. (115X70X16 mm) • Net Weight: 3 oz
(0.088 Kg)
PAGE 7
DMSB SERIES
7 INPUT CHANNEL - PROFESSIONAL INTEGRATED AMPLIFIERS
Absolute Reliability - The DMS B SERIES is like no other Amplifier Line. Every component utilized is
Heavy-Duty. Built tough to take the daily punishment required for continuous operation. DMS B delivers Outstanding Sonic Performance at any level of rated power and with any Speaker System Load. Breakthrough
Technology is applied to every critical Circuitry from Power Surge Protection and Speed Controlled Fans for
Thermal Protection to massive High Current Power Supplies. The Load Management System has the ability to
adapt the power transfer to specific speaker loads. By delivering more current on demand to the Output
Stages when Peak Power is needed the Amplifier will automatically provide the additional Reserve Headroom
required. Sound purity is maintained with lower distortion for “Heavier Bass” and “Clearer Highs”. Four models
are available from 40 Watt to 260 Watt in only 2U of Rack space.
M O D E L S
DMS3040B - 40 W INTEGRATED AMPLIFIER
DMS3080B - 80 W INTEGRATED AMPLIFIER
DMS3120B - 120 W INTEGRATED AMPLIFIER
DMS3260B - 260 W INTEGRATED AMPLIFIER
CONVERTIBLE INPUTS - PHOENIX CONNECTORS - REAR PANEL PROGRAMMING
❁ HIGH PERFORMANCE MULTI MEDIA INTEGRATED AMPLIFIERS
BUILT-IN ZONE PAGING SYSTEM
PHOENIX CONNECTORS
BUILT-IN ADDRESSABLE AUTO VOX RELAY
DIP SWITCH REAR PANEL PROGRAMMABLE
AUTOMATIC LEVEL CONTROL/COMPRESSORS ON AUX 3 AND 4
SEVEN CHANNEL FULLY ADDRESSABLE INPUTS
WIDE POWER BANDWIDTH AND VERY LOW DISTORTION
FOUR AUX INPUTS - RCA CONNECTORS
2ND 5 WATT 8 OHM ZONE - 3RD 5 WATT 70 VOLT ZONE
600 OHM TRANSFORMER BALANCED PHONE PAGING INPUT
24 VOLT DC - 500 MA REGULATED AUXILIARY POWER SUPPLY
ALL CHANNEL REMOTE VOLUME CONTROL CAPABILITY
MUSIC ON HOLD OUTPUT WITH INDEPENDENT LEVEL CONTROL
MASTER REMOTE VOLUME CONTROL
AUTOMATIC LOAD MANAGEMENT SYSTEM
ALL CHANNEL INPUT SENSITIVITY CONTROL
THERMALLY ACTIVATED VARIABLE SPEED COOLING FAN
PORT FOR INPUT/OUTPUT AUDIO MODULES
ON - OFF POWER REMOTE RELAY CAPABILITY
BUILT-IN ROOM COMBINING SYSTEM
BUILT-IN SURGE PROTECTION
PAGE 8
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
EXCEPTIONAL PERFORMANCE - PROVEN INSTALLED RELIABILITY
POWER OUTPUT
DMS3040B 40 Watt RMS
DMS3080B 80 Watt RMS
DMS3120B 120 Watt RMS
DMS3260B 260 Watt RMS
Distortion:
Less than 0.03% THD
Frequency
Response: 20 - 20,000 Hz ± 1 db
INPUTS
Input 1
MIC or LINE BAL
Input 2
MIC or AUX 1
Input 3
MIC or AUX 2
Input 4
MIC or AUX 3
Input 5
MIC or AUX 4
Input 6
Input 7
RVC:
Phantom
Power:
Module Port:
EQ LINK:
Line Output:
MIX BUSS:
MIC or TELPAGE
Module Port
Remote Volume on all Inputs
On all Inputs via DIP Switch
Accepts Standard Module
Pre out, Power Amp in w/Switch
Line Out 600 ohm - 1.5 V loaded
IN/OUT with remote Control
Defeat Relay
MOH Output: 600 ohm-1 Volt Xfmr Balanced
Zone 2 Output: 5 W-8 ohm with Control
Zone 3 Output: 5 W-8 ohm/70 Volt with Control
Main Output Z: 8 ohm, 25 Volt and 70 Volt line
Terminations: Phoneix Connectors, RCA Jacks
Programming: Rear Panel DIP Switches
Housing Finish: Black
DIMENSIONS:
17” W., 15” D., 4” H. w/feet (432X380X102 mm)
3.5” H (89 mm). less feet
NET WEIGHT
DMS3040B 8 Lbs (8.2 Kg)
DMS3080B 21 Lbs (9.6 Kg)
DMS3120B 23 Lbs (11 Kg)
DMS3260B 34 Lbs (15.5 Kg)
A C C E S S O R I E S
PM01ML - Microphone/Line Input Module - Amplifier Module for PASO Amplifiers. Mounts on rear panel port. Versatile
Input Module provides balanced Microphone Input switchable
to Line Input. Remote Volume Control capability
• Microphone Input: 250 Ohm Balanced • Sensitivity: 1.5 Mv •
Line Input: 47 K unbalanced • Sensitivity: 100 Mv • Microphone/Line Switch: Slide Switch on PCB • MIC Input Phantom Power: 16 + 16 Volt (PCB Jumper) • MIC Low-Cut Filter:
-10 dB at 100 Hz (PCB Jumper) • Output Level Control: Front
Panel Screwdriver Adjust • Remote Volume Control MIC and
Line: 10 K Pot • Terminations: MIC Input = Screw terminals,
Remote Volume = Screw terminals, LINE/AUX = Dual RCA
Jacks • Dimensions: 1.38” W., x 3” H. x 3” D. (35X78X78
mm) • Net Weight: 5 oz (0.15 Kg)
27/3501 - Standard 19" Rack Mounting Kit.
Complete with hardware. Black Finish. 2 Units
of Rack vertical space.
AC3 - Programmable Multi-Tone Chime
Module, Internal Plug-in Card. Mounts
on main printed circuit board of Amplifier. Provides eight Electronic Chime
Tones and Westminster. DIP-Switch Programming and Output Level Trimmer.
Tone is triggered each time the Mute terminals are closed.
FOR ADDITIONAL INFORMATION SEE THE INDIVIDUAL ENGINEERING DATA BROCHURE
PML1X6 - Line Distribution Amplifier Module - Mounts on
rear panel port. This is an extremely versatile Line Distribution
Module providing one Line Input (L+R) and Six independent
Mono Line Outputs. Ideally suited for Multi-Amplifier Installations and for Music Distribution Systems using one source for
up to six Outputs.
• Input: 47 K unbalanced • Output: 47 K unbalanced • Gain:
Unity • THD: Less than 0.03% at 1 Khz • Frequency Response:
20 - 20,000 hz EQ set flat • Signal to Noise Ratio: > -80 dB
below +4 dBu • Terminations: Input and Output RCA Jack •
Contacts: Internal PCB Contacts • Supply Voltage: 24 VDC, 25
mA internally derived from amplifier • Panel Finish: Black • Dimensions: 1.38” W., x 3” H. x 3” D. (35X78X78 mm) • • Net
Weight: 5 oz (0.15 Kg)
PMEQ16B - Internal Plug-in EQ Module.
Mounts on main printed circuit board of Amplifier. Provides equalization for the BOSE®
System 16 Speaker System.
PMEQ32B - Internal Plug-in EQ Module.
Mounts on main printed circuit board of Amplifier. Provides equalization for the BOSE®
System 32 Speaker System.
RVC10W - Remote Volume Control for Amplifiers. Decora Style Plate mounts on standard
single Gang Box. Complete with mounting
hardware. Control Potentiometer: 10 K Ohm •
Termination: 4” Pigtail, stripped and tinned •
Dimensions: 4.5” H, 2.75” W, 0.6” Behind Front
Plate. (115X70X16 mm) • Net Weight: 3 oz
(0.088 Kg)
PAGE 9
DMSP SERIES
10 INPUT CHANNEL - PROFESSIONAL MIXER AND INTEGRATED AMPLIFIERS
Absolute Performance - The DMS PLUS SERIES is like no other Amplifier Line. Every component utilized is HeavyDuty. Built tough to take the daily punishment required for continuous operation. DMS PLUS delivers Outstanding Sonic
Performance at any level of rated power and with any Speaker System Load. Breakthrough Technology is applied to every
critical Circuitry from Power Surge Protection and Speed Controlled Fans for Thermal Protection to massive High Current
Power Supplies. The Load Management System has the ability to adapt the power transfer to specific speaker loads. By
delivering more current on demand to the Output Stages when Peak Power is needed the Amplifier will automatically
provide the additional Reserve Headroom required. Digital Coax Inputs and Outputs are provided for outstanding sound
purity with lower distortion for “Heavier Bass” and “Clearer Highs”. Two models are avaialble from 260 Watt to 360 Watt
plus a Preamplifier Mixer in only 2U of Rack space.
M O D E L S
DMS10X - 10 CHANNEL PREAMPLIFIER MIXER
DMS260P - 260 W INTEGRATED AMPLIFIER
DMS360P - 360 W INTEGRATED AMPLIFIER
CONVERTIBLE INPUTS - PHOENIX CONNECTORS - REAR PANEL PROGRAMMING
❁ HIGH PERFORMANCE MULTI MEDIA INTEGRATED AMPLIFIERS
10 CHANNEL FULLY ADDRESSABLE INPUTS
PHOENIX CONNECTORS - REAR PANEL PROGRAMMABLE
ANALOG TO DIGITAL AND DIGITAL TO ANALOG CONVERTERS
DUAL COAX DIGITAL INPUTS AND COAX AUX DIGITAL OUTPUT
600 OHM TRANSFORMER BALANCED PHONE PAGING INPUT
ALL CHANNEL REMOTE VOLUME CONTROL CAPABILITY
ALL CHANNEL INPUT SENSITIVITY CONTROL
PORT FOR INPUT/OUTPUT AUDIO MODULES
BUILT-IN REMOTE CONTROL ROOM COMBINING SYSTEM
PAGE 10
BUILT-IN AUTOMATIC ROOM LEVEL CONTROLLER
BUILT-IN ZONE PAGING SYSTEM
AUTOMATIC LEVEL CONTROL/COMPRESSORS ON AUX 3 AND 4
WIDE POWER BANDWIDTH AND VERY LOW DISTORTION
2ND 5 WATT 8 OHM ZONE - 3RD 15 WATT 70 VOLT ZONE
MUSIC ON HOLD OUTPUT WITH INDEPENDENT LEVEL CONTROL
AUTOMATIC LOAD MANAGEMENT SYSTEM
THERMALLY ACTIVATED VARIABLE SPEED COOLING FAN
ON - OFF POWER REMOTE RELAY CAPABILITY
BUILT-IN SURGE PROTECTION
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
DMS10X - 10 CHANNEL PREAMPLIFIER MIXER - DIGITAL COAX INPUTS/OUTPUTS
A C C E S S O R I E S
PM01ML - Microphone/Line Input Module - Amplifier Module for PASO Amplifiers. Mounts on rear panel port. Versatile
Input Module provides balanced Microphone Input switchable
to Line Input. Remote Volume Control capability
• Microphone Input: 250 Ohm Balanced • Sensitivity: 1.5 Mv •
Line Input: 47 K unbalanced • Sensitivity: 100 Mv • Microphone/Line Switch: Slide Switch on PCB • MIC Input Phantom Power: 16 + 16 Volt (PCB Jumper) • MIC Low-Cut Filter:
-10 dB at 100 Hz (PCB Jumper) • Output Level Control: Front
Panel Screwdriver Adjust • Remote Volume Control MIC and
Line: 10 K Pot • Terminations: MIC Input = Screw terminals,
Remote Volume = Screw terminals, LINE/AUX = Dual RCA
Jacks • Dimensions: 1.38” W., x 3” H. x 3” D. (35X78X78
mm) • Net Weight: 5 oz (0.15 Kg)
27/3501 - Standard 19" Rack Mounting Kit.
Complete with hardware. Black Finish. 2 Units
of Rack vertical space.
AC3 - Programmable Multi-Tone Chime
Module, Internal Plug-in Card. Mounts
on main printed circuit board of Amplifier. Provides eight Electronic Chime
Tones and Westminster. DIP-Switch Programming and Output Level Trimmer.
Tone is triggered each time the Mute terminals are closed.
FOR ADDITIONAL INFORMATION SEE THE INDIVIDUAL ENGINEERING DATA BROCHURE
PML1X6 - Line Distribution Amplifier Module - Mounts on
rear panel port. This is an extremely versatile Line Distribution
Module providing one Line Input (L+R) and Six independent
Mono Line Outputs. Ideally suited for Multi-Amplifier Installations and for Music Distribution Systems using one source for
up to six Outputs.
• Input: 47 K unbalanced • Output: 47 K unbalanced • Gain:
Unity • THD: Less than 0.03% at 1 Khz • Frequency Response:
20 - 20,000 hz EQ set flat • Signal to Noise Ratio: > -80 dB
below +4 dBu • Terminations: Input and Output RCA Jack •
Contacts: Internal PCB Contacts • Supply Voltage: 24 VDC, 25
mA internally derived from amplifier • Panel Finish: Black • Dimensions: 1.38” W., x 3” H. x 3” D. (35X78X78 mm) • • Net
Weight: 5 oz (0.15 Kg)
PMEQ16B - Internal Plug-in EQ Module.
Mounts on main printed circuit board of Amplifier. Provides equalization for the BOSE®
System 16 Speaker System.
PMEQ32B - Internal Plug-in EQ Module.
Mounts on main printed circuit board of Amplifier. Provides equalization for the BOSE®
System 32 Speaker System.
RVC10W - Remote Volume Control for Amplifiers. Decora Style Plate mounts on standard
single Gang Box. Complete with mounting
hardware. Control Potentiometer: 10 K Ohm •
Termination: 4” Pigtail, stripped and tinned •
Dimensions: 4.5” H, 2.75” W, 0.6” Behind Front
Plate. (115X70X16 mm) • Net Weight: 3 oz
(0.088 Kg)
PAGE 11
DMSB SERIES
4 INPUT CHANNEL - INTEGRATED POWER AMPLIFIERS
M O D E L - DMS4361B - 360 Watt Power Amplifier
High Performance High Reliability Design
Wide Frequency Response - Very Low Distortion
4 Channel Inputs - 3 Zone Outputs
Balanced Microphone Input
Phantom Power on MIC Input with Selector
Rear Panel Port Accepts Standard Module
External EQ Link
600 ohm and 8 ohm 1 Watt - Music on Hold Amplifier
MOH Amplifier Source Selector
Zone 2-3, 1 W 8 ohm Output - Independent Control
Telephone Paging Input
Telephone Input Level Control
Auxiliary Input With Stereo Summing
Auxiliary Input Attenuator
Independent Input Controls
MIX Buss and 600 ohm Line Output
NO/NC VOX Operated Relay
Addressable VOX - Voice Activated Muting
Pre-EQ Subwoofer Output
VOX Variable Time Delay Function
Post-EQ Subwoofer Output
19” Rack Mounting Ready
Low profile - 2-U of Vertical Rack space
Addressable MUTE Buss
Direct Muting or Unmuting
AUX1 and Master Remote Volume Controls
24 V DC 250 mA Regulated Power Supply Output
8 ohm, 25 Volt & 70 Volt Output
Rack Mounting
with 27/3501 KIT
PAGE 12
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
DXP SERIES
5 INPUT CHANNEL - DIGITAL INTEGRATED POWER AMPLIFIERS
MODEL - DX5480P - 480 Watt Power Amplifier
Rack Mounting
with 27/3501 KIT
❁ HIGH PERFORMANCE MULTIMEDIA DIGITAL POWER AMPLIFIERS
4 HIGH PASS FILTERS 30 - 60 - 80 - 120 HZ
5 CHANNEL FULLY ADDRESSABLE INPUTS
BUILT-IN ZONE PAGING SYSTEM
PHOENIX CONNECTORS - REAR PANEL PROGRAMMABLE
AUTOMATIC LEVEL CONTROL/COMPRESSORS ON ALL INPUTS
ANALOG TO DIGITAL AND DIGITAL TO ANALOG CONVERTERS
WIDE POWER BANDWIDTH AND VERY LOW DISTORTION
COAX DIGITAL INPUT AND COAX DIGITAL OUTPUT
2ND 5 WATT 8 OHM ZONE - 3RD 15 WATT 8 OHM AND 70 VOLT ZONE
600 OHM TRANSFORMER BALANCED PHONE PAGING INPUT
MUSIC ON HOLD OUTPUT WITH INDEPENDENT LEVEL CONTROL
ALL CHANNEL REMOTE VOLUME CONTROL CAPABILITY
AUTOMATIC LOAD MANAGEMENT SYSTEM
ALL CHANNEL INPUT SENSITIVITY CONTROL
THERMALLY ACTIVATED VARIABLE SPEED COOLING FAN
ALL INPUTS SOURCE SELECTOR WITH CAT 5 CABLING
ON - OFF POWER REMOTE RELAY CAPABILITY
PORT FOR INPUT/OUTPUT AUDIO MODULES
BUILT-IN SURGE - OVER CURRENT AND OVERLOAD PROTECTION
BUILT-IN VOX ACTIVATED RELAY WITH NO AND NC CONTACTS
FRONT PANEL MASTER VOLUME CONTROL WITH BY-PASS SWITCH
See Specifications for PRMS4 - CAT5 Controller on page 15
CONVERTIBLE INPUTS - PHOENIX CONNECTORS - REAR PANEL PROGRAMMING
DIGITAL COAX INPUT/OUTPUT - CAT 5 INPUTS CONTROLLER - 2ND 15 WATT ZONE
FOR ADDITIONAL INFORMATION SEE THE INDIVIDUAL ENGINEERING DATA BROCHURE
PAGE 13
OPTIONAL MODULES FOR AMPLIFIERS
OPTIONAL MODULES FOR AMPLIFIERS
AC3 - Multi-Tone Chime Card
Programmable Multi-Tone Chime Module, Internal Plug-in Card. Mounts on main printed circuit board of Amplifier.
Provides eight Electronic Chime Tones and Westminster. DIP-Switch Programming and Output Level Trimmer. Tone is
triggered each time the Mute terminals are closed.
PM03W - 3-Watt 4 Ohm and 70 V Amplifier Module - Amplifier Module for DMS Series Amplifiers.
Mounts on rear panel port. This is an extremely versatile output module that provides a fourth and independent 3 Watt
output Zone. Internal Source Switch (3 position) allows to select the source from Input 2 or 3 (internal connection) of
the Amplifier or a separate source by using the Module Line Input. Power is derived internally from the Amplifier. 4 ohm
and 70 Volt line output are provided.
• Power Output: 3 Watt RMS • Frequency Response: 40 - 18 Khz • Output Impedance: 4 ohm, 70 Volt line • Input
Impedance: 47K ohm • Sensitivity: 200 Mv • Panel Control: Output Level (screwdriver adjust) • Internal Source Selector: Input2 , Input 3, External Input • Terminations: Line Input = RCA Jack, Output = Screw terminals • Supply
Voltage: 24 V DC (derived from amplifier) • Finish: Black • Dimensions: 1.38” W., x 3” H. x 3” D.
M3EQ - 3-Band Audio Equalizer Module - Audio Equalizer Standard Module for DMS Series Amplifiers.
Mounts on rear panel port. This is an extremely versatile equalizer module providing three independent EQ adjustments
for Low, Mid and High audio spectrum ranges. Standard Input and Output jacks permit connection through the EQ Link
circuit of the Amplifier. Each of the three band controls are detented for positive center positioning (no EQ). Power is
derived internally from the Amplifier.
• Input: 47 K unbalanced • Output: 47 K unbalanced • Gain: Unity THD: Less than0.030% at 1 Khz • Frequency Response: 20 - 20,000 hz EQ set flat • Signal to Noise Ratio: < -80 dB below +4 dBu • Equalization: Low Band: ± 12
dB at 100 Hz Mid Band: ± 12 dB at 1 KHz High Band: ± 12 dB at 10 KHz • Controls: Zero Detented • Terminations:
Input and Output RCA Jack • Contacts: Internal PCB Contacts • Supply Voltage: 24 VDC, 25 mA internally derived
from amplifier • Panel Finish: Black • Dimensions: 1.38” W., x 3” H. x 3” D. (35X78X78 mm) • Cable Supplied: 12”
Dual RCA Cable with Male Plugs on both ends. • Net Weight: 5 oz (0.15 Kg)
- Amplifier Module for DMS Series Amplifiers. Mounts on rear
panel port. Versatile Input Module provides balanced Microphone Input switchable to Line Input. Remote Volume Control
capability
• Microphone Input: 250 Ohm Balanced • Sensitivity: 1.5 Mv • Line Input: 47 K unbalanced • Sensitivity: 100 Mv •
Microphone/Line Switch: Slide Switch on PCB • MIC Input Phantom Power: 16 + 16 Volt (PCB Jumper) • MIC LowCut Filter: -10 dB at 100 Hz (PCB Jumper) • Output Level Control: Front Panel Screwdriver Adjust • Remote Volume
Control MIC and Line: 10 K Pot • Terminations: MIC Input = Screw terminals, Remote Volume = Screw terminals,
LINE/AUX = Dual RCA Jacks • Dimensions: 1.38” W., x 3” H. x 3” D. (35X78X78 mm) • Net Weight: 5 oz (0.15 Kg)
PM01ML - Microphone/Line Input Module
PML1X6 - Line Distribution Amplifier Module - Mounts on rear panel port. This is an extremely versatile Line Distribution module providing one Line Input (L+R) and Six independent Mono Line Outputs. Ideally suited for Multi-Amplifier Installations and for Music Distribution Systems using one source for up to six Outputs.
Input: 47 K unbalanced • Output: 47 K unbalanced • Gain: Unity • THD: Less than 0.03% at 1 Khz • Frequency Response: 20 20,000 hz EQ set flat • Signal to Noise Ratio: > -80 dB below +4 dBu • Terminations: Input and Output RCA Jack • Contacts: Internal
PCB Contacts • Supply Voltage: 24 VDC, 25 mA internally derived from amplifier • Panel Finish: Black • Dimensions: 1.38” W., x 3”
H. x 3” D. (35X78X78 mm) • • Net Weight: 5 oz (0.15 Kg)
P4035 - RACK MOUNTING SHELF - 2 AND 3 RACK UNITS
P 4035/2B 2 Units
P 4035B 3 Units
P4035/2B RACK MOUNTING SHELF 2U P4035B RACK MOUNTING SHELF 3U
19” Utility Rack Mounting Shelf. Heavy-Duty
Steel Construction. Occupies 2 Units of Vertical Rack Space (3.½"). • Construction:
Heavy-Duty Steel • Finish: Matte Black • Dimensions: 19" W., 3½" H., 14¾" D. (482 x 89
x 375 mm) • Net Weight: 4 Lb (1.8 Kg)
PAGE 14
19” Utility Rack Mounting Shelf. Heavy-Duty
Steel Construction. Occupies 3 Units of
Vertical Rack Space (5.¼"). • Construction:
Heavy-Duty Steel •Finish: Matte Black • Dimensions: 19" W., 5¼" H., 14¾" D. (482 x
134 x 375 mm) • Net Weight: 5 Lb (2.3 Kg)
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
CONTROLLERS - UTILITY AMPLIFIERS
PRMS4 - CAT5 - 4 INPUT REMOTE CONTROLLER
The optional Model PRMS4 Controller is a cost effective accessory providing On-Off and Output
Level Control for each of the Amplifier 4 Inputs either independently or collectively using CAT5 cabling up to a distance of 1000 ft.. Each of the
illuminated push-buttons 1-2-3-4 corresponds to
the Amplifier Inputs 1-2-3-4. Labels and additional color lenses for the push-buttons are provided. NOTE: The controls of the PRMS4 do not
alter the Output level set by the MOH - ZONE 1ZONE 2 Controls. May be used with the PASO Series DMAB and DXP Series.
PRMS4 - CAT5 INPUT REMOTE
CONTROLLER
PRMS4 - 4-Multi-Source Remote Controller with independent Level Control. Utilizes a CAT5 Socket and
Phoenix Connector for connection to Amplifier. On-Off
Switch and Level Control for each Input. Uses a 4”
Square Backbox. White Plate.
Dimensions: 4.75”X4.75”, 1.5” D.
PGR12 - DUAL CHANNEL 6 WATT + 6 WATT UTILITY AMPLIFIER AND CONTROLLER
PGR12 - 12 Watt Utility Digital Amplifier ideally suited for Overhead Projector Audio Amplifier and other applications requiring a small size utility
Amplifier. Dual Audio Output 6+6 Watt. Three built-in Relay Switching Contacts, voice activated and direct trigger. Automatic switching between external and internal speakers. Independent Remote Volume Control for
Channel A & B via a PASO Model RVC10W wall mount Remote Volume
Control. May be Wall, Ceiling or Shelf mounted. Phoenix Connectors.
Switching Power Supply. MAY BE USED TO POWER SMALL AREAS
WITH PAGING, MUSIC, DOOR ALARMS, CLASS ROOMS PA, PROJECTORS, ETC.
Dual Power Output: Channel A = 6 Watt RMS - Channel B = 6 Watt RMS. Frequency Response: 30 - 20,000 Hz. Output Impedance:
4 - 8 ohm. Input Impedance: 47K ohm. Sensitivity: 200 Mv. Panel Controls: Input Attenuator, Vox Sensitivity, Channel A Output level,
Channel B Output level. Remote Volume Controls: Channel A - B with 10K Pot. Auto Vox Relay: Dual NO/NC Contacts, VOX Activated.
Relay Contacts Rating: 30 VDC - 7 A. Terminations: Line Input/Output= RCA Jack, other = Phoenix Connector. Supply Voltage: 12
VDC - 2 A with external Power Supply. Dimensions: 5.1” W., x 1.75” H. x 3.75” D. (127X45X96mm). Net Weight: 10 oz (0.3 Kg). Black
250 MV - 50 K
INPUT
ATTENUATOR
LINE OUT LOOPED
CHANNEL B
LEVEL
RVC
q External Line Input
q External Line Output
NO
COM
COM
LOOP TRIGGER
q Wide Frequency Response
NOTE: When a signal is present at the Line In the VOX is activated and
the Relays “A” and “B” are turned ON. Simultaneously the LED Indicators will
turn GREEN from BLUE. The VOX Sensitivity Trimmer adjust the threshold at
which point the Relays are turned ON by the Input Signal.
NO
LOOP RELAY
NO. 3 DPDT
RELAY “C”
for Channel A and B
Relay “C” is activated by shrting the “Direct Loop Trigger” to ground.
q Input for Greeter Box Audio
NO
COM
NC
NO
COM
NC
DIRECT TRIGGER
q VOX Sensitivity Control
POWER
AMPLIFIER - 6 WATT + 6WATT
LED SWITCHING
CONTACTS
G
ACTIVE
q Phoenix Connectors
24 V DC
RELAY “B”
q 4 - 8 ohm Outputs
The LINE IN Signal is then routed to the Power Output IC and present at both Speaker
Output “A” and “B”. Channel “A” and “B” Level Controls independently adjust the Output
Level for Speaker Ch. “A” and Ch. “B”. RVC Controls are available for Remote Control
Function if needed.
VOX RELAY “A”
DPDT
RELAY “A”
G
q Dual VOX Relay Contacts NO/NC
NORMAL
POWER IN
24 V external switching power supply
always on
SPEAKER OUT
q FCC - CSA - UL Listed
VOX
SENSITIVITY
+ RVC “B”
q Remote Output Level Controls
Supply provided
Input Attenuator
sets the Sensitivity
of the Line Input
+ RVC “A”
q Recessed Output Level Controls
q External Switching Power
CHANNEL A
LEVEL
RVC
q Automatic Speaker switching
q VOX Activated Operation
VOX
LINE IN
VOX RELAY “B”
SPDT
q Dual Amplifiers 6 Watt + 6 Watt
CH. “A”
+
-
4-8 OHM
OUTPUT “A”
CH. “B”
+
4-8 OHM
OUTPUT “B”
BLOCK DIAGRAM
PGR12
FOR ADDITIONAL INFORMATION SEE THE INDIVIDUAL ENGINEERING DATA BROCHURE
paso)))))
®
DUAL CHANNEL UTILTY AMPLIFIER
MODULE
professional audio & sound
PAGE 15
100 Channel UHF True Diversity IrDA INFRARED SYNC Wireless System
M O D E L S
RDU2500/MW593 - 100 CHANNEL UHF SYSTEM WITH BELT PACK TRANSMITTER
RDU2500/MW595 - 100 CHANNEL UHF SYSTEM WITH HAND-HELD TRANSMITTER
RDU2500 RECEIVER
UHF PLL Synthesized 100 Channels selectable
True Diversity System for highest quality reception with no dropouts
LCD Display Menu assisted digital operation
Menu driven Frequency, Channel, Squelch and Output Level functions
Microprocessor Control RF Technology for greater operating range
AUTOSCAN function simplifies multi-channel setup
Low Battery indicator on the Receiver monitors Transmitter Battery status
Digital Output Level Control for precision setting and low noise
XLR Male Balanced and ¼” Jack Unbalanced outputs
Automatic bidirectional channel SYNC with Transmitters
SCAN Function automatically searches for cleanest channel
AF, RF LED bar indicators and Diversity A/B indicators
One Half 19" Enclosure
Rack mount for single or dual Rcvr with Optional Rack Kit (1U)
Antennas can be either rear or front mount (with optional kit)
FOR ADDITIONAL ACCESSORIES, ANTENNAS, ETC. SEE PAGE 26
PAGE 16
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Bidirectional IrDA Channel Sync between Receiver and Transmitters
Automatic Channel Synchronization Setting
from either the Receiver or the Transmitter
(Bidirectional) Via IR Signal
Microprocessor Controlled Antenna Diversity vs. True Diversity
The heart of an Antenna Diversity system is the Microprocessor that constantly processes and analyzes the signal strength received from the two antennas. When it detects that
the signal is becoming weak and dropout is imminent, it forces the Receiver to switch over to the other antenna to avoid “dropout” as the signal strengths from two antennas
are never the same. In a True Diversity System two sets of identical RF Front End and IF circuits coexist. The Diversity Comparator electronics constantly compares the two signal
strengths and switches between the two received signals depending on which is stronger thus efficiently eliminating dropout due to a weak signal. Technically speaking a Microprocessor Controlled Antenna Diversity System performs better than a non-Diversity system and are suitable for many PA applications which are budget conscious, however,
for Broadcast, Concert and best performance applications, the True Diversity is the only solution.
AUTOSCAN Function
The Autoscan Function automatically searches for the next clean channel simplifying a multi-channel application set-up.
RDU2500
REAR PANEL VIEW
RDU2500 - SINGLE AND DUAL RACK MOUNT KITS
PRK251
19” (1U) SINGLE
RECEIVER
RACK MOUNT
KIT
PRK252
19” (1U) DUAL RECEIVER
(side by side)
RACK MOUNT
KIT
ANT250 - DUAL ANTENNA FRONT MOUNTING FOR RACK KIT PRK251 - INCLUDES PRE-WIRED CABLES AND CONNECTORS
ANT253 - DUAL ANTENNA FRONT MOUNTING FOR RACK KIT PRK252 - INCLUDES PRE-WIRED CABLES, CONNECTORS AND ANTENNAS MIXER BOARD
RDU2500 - 100 CHANNEL UHF FREQUENCY AGILE IrDA SYNC DIVERSITY RECEIVER
Carrier Frequency Range: 654.00 Mhz - 678.975 MHz - Frequency Group: 10 Receivers per installation - RF Generation: Microprocessor PLL Synthesized - Peak Deviation:
±40 KHz - Frequency Stability: ± 0.005% - S/N Ratio: >110 dB - Sensitivity: -100dBM - Image rejection: >85 dB - Dynamic Range: Super High Dynamic >110 dB - Channel
Selector: Multifunction LCD Display - Audio Output: Unbalanced (1/4” Jack) + 4 dBm (1.25 V) 5 KHz, Balanced (XLR) + 10 dBm (2.5 V) 600 ohm - Output terminations: Phono
1/4” Jack and XLR Male - Antenna Socket: TNC Female - Rack Mount: see above examples - Panel Color Finish: Matte Black - Dimensions: 8” W , 8.75” D., 1.75” H. (200 mm
X 220 mm X 44 mm) - Net Weight: 2.4 Lb (1.09 Kg). Complete with Switching Power Supply: 100-240 VAC, 50-60 Hz, 55-80 VA. Supplied with two UHF Antennas.
MW593 - 100 CHANNEL UHF IrDA SYNC PENDANT/BELTPACK TRANSMITTER
Complete with Electret Microphone, Wind Screen and Tie Clip - MIC Input Termination: 4-pin XLR Mini Connector - Multifunction LCD Display - Channel Selector: Digital on
Display - Power Switch with Auto turn-off - Audio ON/OFF Mute Switch with LED Indicator - Battery Type: 2 X 1.5 V AA - Battery Life: 4-6 Hours (time may vary upon use) UHF Frequency: 625 Mhz Band - Color Finish: Matte Black - Dimensions: 3.75” H. (7.5” including Antenna), 2.5” W., 1.2” D. (including Belt Clip). (95 mm (191 mm with
antenna) X 65 mm X 31 mm) - Net Weight: 3 Oz. (76 grams). Batteries not included.
MW595 - 100 CHANNEL UHF IrDA SYNC HANDHELD TRANSMITTER
Microphone: Unidirectional Dynamic - Low Handling Noise - Multifunction LCD Display - Channel Selector: Digital on Display - Power Switch with Auto turn-off - Momentary
ON LED Indicator - Battery Type: 2 X 1.5 V AA - Battery Life: 4-6 Hours (time may vary upon use) - UHF Frequency: 625 Mhz Band - Color Finish: Matte Black - Dimensions:
9.5” H., 1.5” Dia. (Tapered Body), 2” Dia. (Mic. Head). (242 mm X 38 mm Dia. (Body) X 51 mm Dia. (Mic Head) - Net Weight: 9 Oz. (255 grams) . Batteries not included.
FOR ADDITIONAL INFORMATION SEE THE INDIVIDUAL ENGINEERING DATA BROCHURE
PAGE 17
DUAL PORT UHF WIRELESS BASE
MODEL PTR200 - DUAL UHF RECEIVER/TRANSMITTER BASE STATION
The PTR200 is a dual UHF Wireless Base Station. Will accept either two optional RM190 Receiver Modules (Dual UHF Wireless
System, Transmitters are required (see next page)) or one optional RM190 UHF Receiver and one optional TM190 UHF Transmitter/Repeater or one optional TM190 UHF Transmitter only.
PRK251 - 19” (1U) SINGLE UNIT RACK MOUNT KIT
PTR200 SHOWN WITH OPTIONAL TM190U UHF TRANSMITTER
PRK252 - 19” (1U) DUAL UNIT RACK MOUNT KIT (SIDE BY SIDE)
PTR200 - REAR PANEL
PTR200 - DUAL PORT UHF WIRELESS BASE STATION
Dual Port accept two RM190U Receiver Modules or one TM190U
Transmitter Module or one RM190U Receiver Module and one
TM190U Transmitter Module (Transmitter/Repeater Configuration)
- Panel Color Finish: Matte Black - Dimensions: 6” D. , 3“ W., 1.5”
H. (153 mm X 77 mm X 38 mm) - Net Weight: 9 Oz (255 grams).
Complete with AC Adapter. Supplied with two UHF Antennas.
PTR200 CONFIGURATION TABLE
RF
USING TWO RM190U 100 CHANNEL UHF RECEIVERS
Up to two 100 Channel UHF Frequency Agile Receivers may be used with the PTR200.
Receivers are plug-in and easily install on the front panel ports provided. The two Receivers can be simultaneously operated by using the optional Transmitters MW293
Beltpack or MW295 Hand-Held described on the next page.
RF
UHF
TM190
REPEATER
OUTPUT
RF
▲ ▼
CHANNEL
PWR
GAIN
L
H
UHF
TM190
REPEATER
OUTPUT
▲ ▼
CHANNEL
PWR
GAIN
L
USING ONE RM190U UHF RECEIVER AND ONE TM190U TRANSMITTER
In this configuration the UHF Receiver audio output is routed to the Transmitter audio
input for re-broadcasting (Repeater) to other UHF Receivers operating at the Transmitter set frequency channel (up to 800 Ft. distance) .
H
USING ONE TM190U 100 CHANNEL UHF TRANSMITTER
Up to one 100 Channel UHF Frequency Agile TM190U Transmitter may be used with
the PTR200. In this configuration the Transmitter can brodcast up to 800 Ft. to various
UHF Receivers operating at the same frequency. Ideally suited for Transmitting via
UHF to numerous Wireless Portable Sound Systems.
MODEL RM190U - OPTIONAL 100 CHANNEL UHF FREQUENCY AGILE RECEIVER MODULE
RM190U - 100 CH. UHF TRUE DIVERSITY PLUG-IN RECEIVER MODULE
LED Channel Selector Display - Channel Selectors: UP-DOWN - Power Switch with Audio Level Control Squelch Control - Autoscan Button - RF-AB LED Diversity Indicators - Transmitter low battery indicator UHF Frequency: 625 Mhz Band - Panel Color Finish: Matte Black - Dimensions: 8” W , 8.75” D., 1.75” H.
(200 mm X 220 mm X 44 mm) - Net Weight: 9 Oz (255 grams). OPERATES ON THE 625 MHZ UHF BAND
MODEL TM190U - OPTIONAL 100 CHANNEL UHF FREQUENCY AGILE TRANSMITTER MODULE
TM190U - 100 CHANNEL UHF PLUG-IN TRANSMITTER MODULE
Mounts on Front Panel Port - Display Screen: 7-segment LED - Channel Selectors: UP-DOWN Power Switch with Audio Level Control - HI - LO Power Output Switch - High 50mW, Low 35mW
- Spurious Emission > 60 dB below carrier - Dynamic Range > 110 dB - T.H.D. < 0.5% - UHF Frequency: 625 Mhz Band - Antenna Socket TNC type - Panel Color Finish: Matte Black - Dimensions: 6” D. , 3“ W., 1.5” H. (153 mm X 77 mm X 38 mm) - Net Weight: 9 Oz (255 grams).
OPERATES ON THE 625 MHZ UHF BAND
PAGE 18
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
QUAD PORT UHF WIRELESS BASE
MODEL PR400 - QUAD UHF RECEIVER BASE STATION
The PR400 is a quad UHF Wireless Base Station. Will accept up to four optional RM190 Receiver Modules (Four UHF
Wireless Microphone System) all into one unit of vertical Rack space. Optional UHF Transmitters Models MW293
Beltpack, MW295 Hand-Held or WBM500/18 Desk base are required (see below).
PR400 - QUAD PORT UHF WIRELESS RECEIVER BASE
Quad Port accept up to four RM190U Receiver Modules - All Receivers may be operated simultaneoulsy. Panel Color Finish: Matte Black - Independent
Receiver Audio Out Balanced. Mixed Audio Out either Line or MIC Level with selector switch. Built-in True-Diversity Antenna Combiner. Terminations: Independent Channel Audio Out: XLR Connector - Mixed Audio Out Line: 1’4 Phono Jack, MIC = XLR Connector Balanced. Antenna: TNC Female Connector.
Power Requirement: 100-240 Volt (Switching Power Supply) Rack Mounting included. Dimensions: Front Panel = 19” W., 1.75” H. (483 X 45 mm) Cabinet
= 16.5” W., 10.25” D., 1.6’ H. 6” D. , 3“ W., 1.5” H. (420 X 261 X 41 mm) - Net Weight: 6.25 Lbs (2.85 Kg). Supplied with two UHF Antennas.
MODEL PR400 - FRONT PANEL - Photo Shown with optional RM190 Modules Installed
MODEL PR400 - REAR PANEL
MODEL RC21 - 19” METAL ROAD CARRYING CASE FOR PR400
RC21 - PR400 19” METAL ROAD CARRYING CASE
Heavy-Duty Metal Carrying Case for PR400. Removable Front and
Rear Covers. Covers Metal Snap-Latches. 19” Rack Mounting
Housing. Reinforced Corners and Large Carrying Handle. Finish:
Silver and Black. Dual removable Covers with Storage Compartment. Dimensions: 20.5” W., 16” D., 3” H. (520 X 406 X 76 mm)
Net Weight: 5.6 Lbs (2.6 Kg) empty.
SHOWN WITH OPTIONAL PR400 AND FOUR RM190U
RECEIVERS INSTALLED
MW293 - 100 CHANNEL UHF PENDANT/BELTPACK TRANSMITTER
Complete with Electret Microphone, Wind Screen and Tie Clip - MIC Input Termination: 4-pin XLR Mini Connector - Multifunction LCD Display - Channel Selector: Digital on
Display - Power Switch with Auto turn-off - Audio ON/OFF Mute Switch with LED Indicator - Battery Type: 2 X 1.5 V AA - Battery Life: 4-6 Hours (time may vary upon use) UHF Frequency: 625 Mhz Band - Color Finish: Matte Black - Dimensions: 3.75” H. (7.5” including Antenna), 2.5” W., 1.2” D. (including Belt Clip). (95 mm (191 mm with
antenna) X 65 mm X 31 mm) - Net Weight: 3 Oz. (76 grams). Batteries not included. TRANSMITTER OPERATES ON THE 625 MHZ UHF BAND.
MW295 - 100 CHANNEL UHF HANDHELD TRANSMITTER
Microphone: Unidirectional Dynamic - Low Handling Noise - Multifunction LCD Display - Channel Selector: Digital on Display - Power Switch - Momentary ON LED Indicator
- Battery Type: 2 X 1.5 V AA - Battery Life: 4-6 Hours (time may vary upon use) - UHF Frequency: 625 Mhz Band - Color Finish: Matte Black - Dimensions: 9.5” H., 1.5” Dia.
(Tapered Body), 2” Dia. (Mic. Head). (242 mm X 38 mm Dia. (Body) X 51 mm Dia. (Mic Head) - Net Weight: 9 Oz. (255 grams) . Batteries not included.
TRANSMITTER OPERATES ON THE 625 MHZ UHF BAND.
WBM500/18 - 100 CHANNEL UHF DESK BASE TRANSMITTER
Microphone: Removable Unidirectional Electret with 18” (43 cm) Gooseneck and XLR Connector - Multifunction LCD Display - Channel Selector: Digital on Display - Gain
Control - XLR Connector: MIC Output and Line Input on rear panel - Illuminated Push to talk and Push to Lock Pads - Power Switch - Power LED Indicator - Battery Type: 2
X 1.5 V AA - Battery Life: 4-6 Hours (time may vary upon use) - UHF Frequency: 625 Mhz Band - Color Finish: Dark Grey and Silver - Dimensions Base: 5” W., 6“ D. (Tapered)
(127 mm X 153 mm), Gooseneck Mic: 18” H.. ((430 mm) - Net Weight: 1.7 Lbs (800 grams) . AC Adapter/Recharger included - Batteries not included.
TRANSMITTER OPERATES ON THE 625 MHZ UHF BAND.
FOR ADDITIONAL INFORMATION SEE THE INDIVIDUAL ENGINEERING DATA BROCHURE
PAGE 19
50 WATT - MODULAR - CLASS “D” ALL DIGITAL WIRELESS PORTABLE SOUND SYSTEM
The WPCS50M is a sophisticated, compact, highly versatile sound system specifically engineered for a variety of
Multimedia Sound Reinforcement Applications. The numerous available options allow to tailor a system that suits
the individual requirement with maximum performance, efficiency and cost effectiveness. The rugged, compact
enclosure makes the unit easy to carry and easy to install anywhere indoor or outdoor.
AC-DC - 50 W HIGH PERFORMANCE - PLL-UHF 16 CHANNEL FREQUENCY AGILE CLASS “D” AMPLIFIER ALL DIGITAL - WIRELESS PORTABLE SOUND SYSTEM
COVERS AN AUDIENCE OF 800 OR MORE
INDOOR OUTDOOR OPERATION
HIGH INTELLIGIBILITY - SUPERIOR SOUND
SUPPLIED WITH WIRED MICROPHONE
VERSATILE MULTIMEDIA COMPACT SYSTEM
RUGGED - HIGH IMPACT ENCLOSURE
AC - DC OPERATION
REMOVABLE RECHARGEABLE BATTERY (SUPPLIED)
INDEPENDENT INPUT LEVEL CONTROLS
UP TO 2 UHF WIRELESS SYSTEM OPERATION
MAY BE WALL MOUNTED WITH OPTIONAL BRACKET
SUPPLIED WITH ONE WIRELESS RECEIVER (TRANSMTTER REQUIRED)
The acoustically engineered Speaker System provides controlled sound dispersion with maximum power output concentration where it is needed.
Sound coverage is uniform, with full articulation of speech in the entire area served. The Unidirectional Wireless Microphone is combined with an effective Speaker System that greatly minimizes feedback “howl”' and reverberation resulting when sound bounces from ceiling and wall surfaces.
Whether you address small or large audiences, your voice is carried over effectively and efficiently. The WPCS50M will cover an area up to 20,000²
Feet (1,900² Meters).
M O D E L - WPCS50M
PAGE 20
WIRELESS SYSTEM OPERATES ON THE 625 MHZ UHF BAND
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
50 WATT - MODULAR - CLASS “D” ALL DIGITAL WIRELESS PORTABLE SOUND SYSTEM
MW323 - 16 CHANNEL UHF PENDANT/BELTPACK TRANSMITTER
Supplied with Electret Microphone, Wind Screen and Tie Clip - Complete with Lanyard and Belt Clip - MIC Input Termination: 4-pin XLR Mini
Connector - Multifunction LCD Display - Channel Selector: Digital on Display - Power Switch - Audio ON/OFF Mute Switch with LED Indicator Battery Type: 2 X 1.5 V AA - Battery Life: 4-6 Hours (time may vary upon use) - UHF Frequency: 625 Mhz Band - Color Finish: Matte Black - Dimensions: 3.75” H. (7.5” including Antenna), 2.5” W., 1.2” D. (including Belt Clip). (95 mm (191 mm with antenna) X 65 mm X 31 mm) - Net
Weight: 3 Oz. Batteries not included. TRANSMITTER OPERATES ON THE 625 MHZ UHF BAND.
MW326 - 16 CHANNEL UHF HAND-HELD TRANSMITTER
Microphone: Unidirectional Dynamic - Low Handling Noise - Multifunction LCD Display - Channel Selector: Digital on Display - Power Switch
- Momentary ON LED Indicator - Battery Type: 2 X 1.5 V AA - Battery Life: 4-6 Hours (time may vary upon use) - UHF Frequency: 625 MHz Band
- Color Finish: Matte Black - Dimensions: 9.5” H. , 1.5” Dia. (Tapered Body), 2” Dia. (Mic. Head). (242 mm X 38 mm Dia. (Body) X 51 mm Dia.
(Mic Head) - Net Weight: 9 Oz. Batteries not included. TRANSMITTER OPERATES ON THE 625 MHZ UHF BAND
FOR ADDITIONAL INFORMATION SEE THE INDIVIDUAL ENGINEERING DATA BROCHURE
PAGE 21
150 WATT ALL DIGITAL PORTABLE SOUND SYSTEM
The WPSS150M is a sophisticated, high power, highly versatile digital sound system specifically engineered for a
variety of Multimedia Sound Reinforcement Applications. The numerous available options allow to tailor a system
that suits the individual requirement with maximum performance, efficiency and cost effectiveness. The rugged,
compact enclosure makes the unit easy to carry and easy to install anywhere indoor or outdoor.
AC-DC - 150 W HIGH PERFORMANCE - PLL-UHF 100 CHANNEL FREQUENCY AGILE CLASS “D” AMPLIFIER ALL DIGITAL - WIRELESS PORTABLE SOUND SYSTEM
COVERS AN AUDIENCE OF 2000 OR MORE
INDOOR OUTDOOR OPERATION
HIGH INTELLIGIBILITY - SUPERIOR SOUND
SUPPLIED ACCESSORIES CARRYING CASE
VERSATILE MULTIMEDIA COMPACT SYSTEM
RUGGED - HIGH IMPACT ENCLOSURE
AC - DC OPERATION
BUILT-IN RECHARGEABLE BATTERY (SUPPLIED)
INDEPENDENT INPUT LEVEL CONTROLS
HIGH POWER TRIAXIAL SPEAKER SYSTEM
UP TO 4 UHF WIRELESS SYSTEM OPERATION
OR UP TO 3 UHF RECVRS AND 1 UHF TRANSMITTER
BUILT-IN CASTERS AND 3 STAGE HANDLE
COVERS AN AREA UP TO 25,000 SQ. FT. (2,400 SQ METERS)
RM190U - 100 CHANNEL UHF TRUE DIVERSITY PLUG-IN RECEIVER MODULE
Mounts on WPSS150M Rear Panel - LED Channel Selector Display - Channel Selectors: UP-DOWN - Power Switch with Audio Level Control - Squelch Control - Autoscan
Button - RF-AB LED Diversity Indicators - Transmitter low battery indicator - UHF Frequency: 625 Mhz Band - Panel Color Finish: Matte Black - Dimensions: 6” D. , 3“ W., 1.5”
H. (153 mm X 77 mm X 38 mm) - Net Weight: 9 Oz (255 grams). RECEIVER OPERATES ON THE 625 MHZ UHF BAND.
M O D E L - WPSS150M
PAGE 22
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
SOUNDCASTER 150 - 150 WATT ALL DIGITAL PORTABLE SOUND SYSTEM
MW293 - 100 CHANNEL UHF PENDANT/BELTPACK TRANSMITTER
Complete with Electret Microphone, Wind Screen and Tie Clip - MIC Input Termination: 4-pin XLR Mini Connector - Multifunction LCD Display - Channel Selector: Digital on
Display - Power Switch with Auto turn-off - Audio ON/OFF Mute Switch with LED Indicator - Battery Type: 2 X 1.5 V AA - Battery Life: 4-6 Hours (time may vary upon use) UHF Frequency: 625 Mhz Band - Color Finish: Matte Black - Dimensions: 3.75” H. (7.5” including Antenna), 2.5” W., 1.2” D. (including Belt Clip). (95 mm (191 mm with
antenna) X 65 mm X 31 mm) - Net Weight: 3 Oz. (76 grams). Batteries not included. TRANSMITTER OPERATES ON THE 625 MHZ UHF BAND.
MW295 - 100 CHANNEL UHF HANDHELD TRANSMITTER
Microphone: Unidirectional Dynamic - Low Handling Noise - Multifunction LCD Display - Channel Selector: Digital on Display - Power Switch - Momentary ON LED Indicator
- Battery Type: 2 X 1.5 V AA - Battery Life: 4-6 Hours (time may vary upon use) - UHF Frequency: 625 Mhz Band - Color Finish: Matte Black - Dimensions: 9.5” H., 1.5” Dia.
(Tapered Body), 2” Dia. (Mic. Head). (242 mm X 38 mm Dia. (Body) X 51 mm Dia. (Mic Head) - Net Weight: 9 Oz. (255 grams) . Batteries not included.
TRANSMITTER OPERATES ON THE 625 MHZ UHF BAND.
WBM500/18 - 100 CHANNEL UHF DESK BASE TRANSMITTER
Microphone: Removable Unidirectional Electret with 18” (43 cm) Gooseneck and XLR Connector - Multifunction LCD Display - Channel Selector: Digital on Display - Gain
Control - XLR Connector: MIC Output and Line Input on rear panel - Illuminated Push to talk and Push to Lock Pads - Power Switch - Power LED Indicator - Battery Type: 2
X 1.5 V AA - Battery Life: 4-6 Hours (time may vary upon use) - UHF Frequency: 625 Mhz Band - Color Finish: Dark Grey and Silver - Dimensions Base: 5” W., 6“ D. (Tapered)
(127 mm X 153 mm), Gooseneck Mic: 18” H.. ((430 mm) - Net Weight: 1.7 Lbs (800 grams) . AC Adapter/Recharger included - Batteries not included.
TRANSMITTER OPERATES ON THE 625 MHZ UHF BAND.
FOR ADDITIONAL INFORMATION SEE THE INDIVIDUAL ENGINEERING DATA BROCHURE
PAGE 23
50 WATT - CLASS “D” ALL DIGITAL WIRED OR WIRELESS PORTABLE SOUND SYSTEM
MODELS - TA50 AND WTA50 WIRELESS
The TA50 (WTA50) is a sophisticated, compact, highly versatile sound system specifically engineered for a variety
of Multimedia Sound Reinforcement Applications. The numerous available options allow to tailor a system that
suits the individual requirement with maximum performance, efficiency and cost effectiveness. The rugged, compact enclosure makes the unit easy to carry and easy to use anywhere indoor or outdoor.
AC-DC - 50 W HIGH PERFORMANCE - PLL-UHF 16 CHANNEL FREQUENCY AGILE CLASS “D” AMPLIFIER ALL DIGITAL - WIRELESS PORTABLE SOUND SYSTEM
MORE THAN 200 FT (60 Meters) EFFECTIVE RANGE
INDOOR OUTDOOR OPERATION
HIGH INTELLIGIBILITY - SUPERIOR SOUND
SUPPLIED WITH WIRED MICROPHONE
Built-in USB Port and MP3 Player (WTA50 only)
RUGGED - HIGH IMPACT ENCLOSURE
AC - DC OPERATION
Built-in LITHIUM ION Rechargeable Battery
INDEPENDENT INPUT LEVEL CONTROLS
RETRACTABLE CARRYING HANDLE
SUPPLIED WITH SHOULDER STRAP
MAY BE MOUNTED ON A FLOOR STAND
16 Ch. UHF RECEIVER (WTA50 only) requires Transmitter
The acoustically engineered Speaker System provides controlled sound dispersion with maximum power output concentration where it is
needed. Sound coverage is uniform, with full articulation of speech in the entire area served. The Unidirectional Wireless Microphone is combined
with an effective Speaker System that greatly minimizes feedback “howl”' and reverberation resulting when sound bounces from ceiling and
wall surfaces. Whether you address small or large audiences, your voice is carried over effectively and efficiently. The TA50-WTA50 has an effective Voice Range in excess of 200 Ft. (61 Meters).
PAGE 24
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
MODEL TA50 - BASIC SYSTEM WITH M555 DYNAMIC MICROPHONE
MODEL WTA50 - BUILT-IN 16 CHANNEL UHF RECEIVER - USB MP3 PLAYER
AND M555 UNIDIRECTIONAL DYNAMIC MICROPHONE WITH CABLE
WIRELESS SYSTEM OPERATES ON THE 625 MHZ UHF BAND
FOR ADDITIONAL INFORMATION SEE THE INDIVIDUAL ENGINEERING DATA BROCHURE
PAGE 25
Antenna Distribution System
Model PAD416 - UHF Diversity Antenna Distribution System
The PAD416 is an active unity-gain, UHF Diversity Antenna Distribution System. It provides one REMOTE ANTENNA A Input to four Receiver Outputs and one
REMOTE ANTENNA B Input to four Receiver Outputs. The PAD416 also provides DC Power to up to four Diversity Receivers (12V - 14V). Rack Mount Ears,
prewired BNC to BNC Antenna Cables, DC Power Cables and BNC/TNC Connector Adapters for the Diversity Receivers are included. The Remote Antennas
AR216, DA80, Antenna Boosters AB80, and RF connecting cables are optional.
Frequency Range: 600 to 1000 Mhz
Input Impedance:
50 ohm
Output Impedance: 50 ohm
Nominal Gain:
0 dB
BNC Antenna Jacks: 4 Antenna A, 4 Antenna B
Remote Ant. Jacks: 1Antenna A, 1 Antenna B
DC Power Output: 12V - 14V, 3.6 A
DC Output Jack:
Four 12 - 14 VDC
Power Requirement: 100 - 240 V, 50-60 hZ
Rack Mount:
19” with Rack Ears supplied
Rack Space:
1 Unit of vertical space
Dimensions:
17” W., 7.75” D., 1.75” H.
(432 X 197 X 45 mm)
Net Weight:
3.6 Lb. (1.65 Kg)
The PAD416 System includes: 8 - 6 ft. (1 m) BNC
to TNC Coax. Cables, 8 BNC to TNC Adapters, 4
DC Supply Cables, 2-1/4 Wave UHF Antennas, 2
Rack Ears and 1 Power Cord.
BLOCK DIAGRAM - The Block Diagram shows the PAD416 with 4
RDU2500 UHF Diversity Receivers, 2 optional AR216 Remote Antenna and 2 optional AB80 Antenna Booster. The Antenna Booster
is required only if the distance between the PAD416 and the
AR216 Antenna exceeds 100 ft.. Please note that if it is required
for the RDU2500 Receivers to be mounted in a Rack the optional
PRK216 Rack Kit is required, one Kit for two receivers.
REMOTE ANTENNA B
OPTIONAL MODEL AR216
Accessories
SPECIFICATIONS
DA-80 - UHF Unidirectional Antenna -
REMOTE ANTENNA A
OPTIONAL MODEL AR216
OPTIONAL
MODEL AB80
UHF ANTENNA
BOOSTER
ANTENNA CABLE
NOT INCLUDED
DA-80 UHF Unidirectional
Antenna
ANTENNA CABLE
NOT INCLUDED
PAD416 ANTENNA DISTRIBUTION SYSTEM
ANTENNA B
OUTPUT
1
2
3
DC OUTPUT
10 - 14 V
4
ANTENNA A
OUTPUT
4
3
2
AC INPUT
1
ANTENNA
B
ANTENNA
A
RDU2500 RECEIVER 4
10 - 15 V
ANT A
AB80 - Antenna Booster - Frequency Range:
600~1000 Mhz - Input Gain: +12.5 dB - Noise:
<1.4 dB - Input/Output: Impedance: 50 ohm Terminations: BNC Male to BNC Female - Dimensions: 4” L. (including Connectors), 1.25” Diameter: (105 X 32 mm) - Net Weight: 0.22 Lb (0.2
Kg) - Mounts in series with Antenna RF Cable.
DC IN
ANT B
RDU2500 RECEIVER 2
AR216 - UHF Ground Plane Antenna - Frequency
Range: 600 ~ 1000 Mhz - Input Termination: BNC
Male - Mounting: 5/8”-27 thread on rod for
mounting on flange (supplied) or on microphone
stand - 90° elbow adapter for wall mounting - Dimensions: 19.25” (489 mm) H. fully extended Net - Weight: 1 Lb (0.45 Kg) - 2 Antennas are required for diversity system. Termination: BNC
Female. RF Cable not included.
DC IN
ANT B
RDU2500 RECEIVER 3
100 - 240V
The AR216 consists of one base assembly, four antenna rods, one mounting
flange, one straight and one curved
mounting arm for 90° wall installation.
The RF cable for connection to the
PAD416 is not supplied.
Wideband design for use with all UHF Wireless
Systems. Increased range and reduced interference as compared to omnidirectional 1/2-wave
antennas. Improves RF Signal Gain by up to 10
dB or more. Radiation Pattern: Directional, Cardioid. Frequency Range: 470 ~ 952 Mhz - Input
Termination: BNC Female - Dimensions: 10.5”
W., 12” H., 1.10” D. (267X305X28 mm) Net
Weight: 10.4 oz (295 grams) Mounting: 5/8”-27
thread on integral swivel adapter bracket for
mounting on flange or on microphone stand.
Shipped in pair for diversity systems. May be
wall or ceiling mounted with WMB50 listed on
page 21. RF Cable not included.
10 - 15 V
ANT A
10 - 15 V
ANT A
DC IN
ANT B
AB80 UHF
Antenna Booster
PRK-AM416 - Rack Ears with Antenna Mounts for
RDU2500 RECEIVER 1
ANT B
PAGE 26
DC IN
10 - 15 V
ANT A
AR216 Remote
UHF Ground RDU2500 - 1 pair includes BNC Connectors and
Plane Antenna 12” Prewired Cables for conection to the Receiver.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Solid Hardwood and Laminate Sound Powered Lecterns and Cabinets
PASO has continuously produced Sound Lecterns for over 50 Years. First introduced in
1960 the SOUND LECTERN was a new Sound Reinforcement System concept. Produced in
large quantity,the integration of a PA Amplifier, a Sound Column Speaker System and a Microphone into a Lectern Cabinet, quickly became a success. Today, PASO manufactures a
complete line of Sound Lecterns to meet a variety of applications and budgets. PASO
Lecterns are known for their high quality and high performance standards. Several models
are available in a choice of traditional color finishes that will complement any room decor
or architectural style.
CABINETRY - The Solid Hardwood models are handcrafted and constructed by using the
finest Solid Hardwoods and Veneers. All solid hardwood and veneers are matched, hand
sanded and then stained to highlight the natural grain of the woods. Finally two hard coat
finishes are hand buffed to a satin non-glare finish to provide long lasting protection and
to bring out the unequaled beauty and distinction of the natural wood. The classic design
and the commanding size make the Lecterns ideally suited for boardrooms, conference
rooms, convention centers, auditoriums, large meeting rooms, schools, hospitals, hotels,
restaurants, etc.
SOUND SYSTEM - The PASO Lectern’s Sound System has been specifically engineered to
provide clean, uniform sound dispersion with amazing power and clarity and twice the
power output of similar competitive models. Acoustic feedback is virtually eliminated by
using a directional Sound Column Speaker design, Unidirectional Dynamic Microphone and
Speech Filter Equalization. Most models will effectively cover audiences of 2500 or more
indoor. All models may be used outdoor.
ALL WOOD CABINET MODELS AVAILABLE WITH OR WITHOUT SOUND SYSTEM
SOUND SYSTEM
The figure at left shows the vertical and horizontal sound radiation pattern of the Sound
Column Lecterns. The acoustically engineered sound column enclosure provides
controlled sound dispersion with maximum
power output concentration where it is
needed. Sound coverage is uniform, with full
articulation of speech in the entire area
served. The built-in electronic Speech-Filter
Equalizer greatly minimizes feedback
``howl'' and reverberation resulting when
sound bounces from ceiling and wall surfaces. Whether you address small or large
audiences, your voice is carried over effectively and efficiently. The Lectern will cover
an area up to 20,000² Feet (2,000² Meters).
The large figure at left shows the approximate “Effective Sound Range'' of a Paso
Sound Column Lectern when used at rated
power. Approx. Range: 250 Ft. (80 m.).
TILT AND ROLLTM
TILT AND ROLL:™ Selected models incorporate two recessed casters
within the floor base. By tilting the
cabinet rearward, the Lectern can
be easily moved from location to location. Once the Lectern is returned
to its vertical position, the Lectern is
stationary and locked in position.
DC OPERATION
DC OPERATION: Most models
may be operated on DC by using the
optional rechargeable battery pack
(see accessories). The battery is automatically recharged by the built-in
recharger when the Lectern is operated on AC.
All PASO Lecterns and Cabinets are Handcrafted in the USA
FOR ADDITIONAL INFORMATION SEE THE INDIVIDUAL ENGINEERING DATA BROCHURE
PAGE 27
150 WATT SOUND POWERED LECTERN - CLASS D DIGITAL AMPLIFIER
M O D E L S
SL600 - 150 WATT POWERED SOUND COLUMN LECTERN - HARDWOOD FINISH
SL600NO NATURAL OAK - SL600DO DARK OAK - SL600NW NATURAL WALNUT
SL600NM NATURAL MAHOGANY - SL600DM DARK MAHOGANY - SL600RM RED MAHOGANY
Reading Light
Retractable Projector Shelf
Locking Compartment
Utility Shelf
Casters for Mobility
DC operation with optional Battery
Rear View
Computer and Projector not supplied
PAGE 28
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
The extremely flexible “MODULAR” concept allows the Lectern to be fitted with a number
of Modules to meet the individual application with maximum cost effectiveness !
ECO-Friendly
Green Product
All PASO Lecterns and Cabinets are Handcrafted in the USA
FOR ADDITIONAL INFORMATION SEE THE INDIVIDUAL ENGINEERING DATA BROCHURE
PAGE 29
Solid Hardwood Cabinets and Digital Sound Powered Lecterns
SL 400 - 150 Watt - SOLID HARDWOOD
SOUND POWERED LECTERN
AC and Optional DC Operation
Class D Digital Amplifier
Covers an audience of up to 1500
Handcrafted Lectern constructed by using the finest Solid Hardwoods and Veneers. The reading table is wide and deep providing over 300² inches of usable
surface. A recessed reading light is provided. The classic design and the commanding size makes this Lectern ideally suited for boardrooms, conference
rooms, convention centers, auditoriums, large meeting rooms, schools, hospitals, hotels, restaurants, etc. The SL400 Sound System has been specifically
engineered to provide clean, uniform sound dispersion with amazing power
and clarity and twice the output power of similar competitive models. Acoustic
feedback is virtually eliminated by using a directional Sound Column Speaker
design, Unidirectional Dynamic Microphone and Speech Filter Equalization.
The Sound Lectern will effectively cover audiences of 1500 or more indoor. Dimensions: 48" H., 22½" W., 21¼" D. Net Weight: 70 Lbs (34 Kg).
AVAILABLE WITH OR WITHOUT SOUND SYSTEM
(see below for models available)
q Optional Wireless Microphone (Up to 4)
q Optional DVD/CD/USB Player
q Unidirectional Dynamic Microphone
q Powerful Sound Column Speaker System
q Built-In Speech Filter Equalizer
q Volume and Tone Controls
MODELS WITH SOUND
CABINETS ONLY
Model No.
Cabinet Finish
Model No.
SL400DO
SL400NW
SL400NO
SL400NM
SL400DM
SL400RM
Dark Oak
Natural Walnut
Natural Oak
Natural Mahogany
Dark Mahogany
Red Mahogany
SLC400DO
SLC400NW
SLC400NO
SLC400NM
SLC400DM
SLC400RM
-
DIMENSIONAL DRAWINGS
Reading Table:
20" W., 15.5" D.
21.75"
8.00"
Cabinet Finish
-
Dark Oak
Natural Walnut
Natural Oak
Natural Mahogany
Dark Mahogany
Red Mahogany
q Output for Auxiliary Speaker
q Inputs for up to two Wired Microphones
q Output for Tape Recording Device
q Recessed Casters for Mobility
q Recessed Reading Light
q DC Operation with Optional Battery
SEE OPTIONAL UHF WIRELESS SYSTEMS
& DVD/CD/USB PLAYER
MP3 RECORDER MODULES ON PAGE 29
ECO-Friendly
Green Product
Rear View
FEATURES
21.25"
Reading Light
TILT AND ROLL:™ The Lectern incorporates two recessed casters
within the floor base. By tilting the cabinet rearward, the Lectern can
be easily moved from location to location. Once the Lectern is returned to its vertical position, the Lectern is stationary and locked
in position.
DC OPERATION: The Lectern may be operated on DC by using the
optional rechargeable battery pack (see accessories). The battery is
automatically recharged by the built-in recharger when the Lectern
is operated on AC.
48"
ACCESSORIES
M941M - Auxiliary Unidirectional Dynamic Microphone. Complete
with 15ft (5 m) Cable and XLR male connector.
Optional
Battery
Storage
22.5"
Front View
PAGE 30
16.5"
Rear View
Side View
27/12 - 12 Volt sealed rechargeable battery pack. Lectern operates
5-6 hours on each charge. Mounts inside Lectern. Two required.
CV24 - 30ft. (10 m) Microphone Extension Cable complete with XLR
connectors.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Solid Hardwood Cabinets and Digital Sound Powered Lecterns
Wide Body - Solid Hardwood Cabinets and Digital Sound Powered Lecterns
SL 500 - 150 Watt - 25˝ Wide Body
SOLID HARDWOOD SOUND POWERED LECTERN
AC and Optional DC Operation
Class D Digital Amplifier
Covers an audience of up to 2500
Handcrafted Lectern constructed by using the finest Solid Hardwoods and
Veneers. The reading table is wide and deep providing over 300² inches of
usable surface. A recessed reading light is provided. The classic design and
the commanding size makes this Lectern ideally suited for boardrooms,
conference rooms, convention centers, auditoriums, large meeting rooms,
schools, hospitals, hotels, restaurants, etc. The SL500 Sound System has
been specifically engineered to provide clean, uniform sound dispersion
with amazing power and clarity and twice the output power of similar competitive models. Acoustic feedback is virtually eliminated by using a directional Sound Column Speaker design, Unidirectional Dynamic Microphone
and Speech Filter Equalization. The Sound Lectern will effectively cover audiences of 2500 or more indoor. Dimensions: 49" H., 25" W., 23" D. Net Weight:
90 Lbs (41 Kg).
AVAILABLE WITH OR WITHOUT SOUND SYSTEM
(see below for models available)
SEE OPTIONAL UHF WIRELESS SYSTEMS
& DVD/CD/USB PLAYER
MP3 RECORDER MODULES ON PAGE 29
MODELS WITH SOUND
ECO-Friendly
Green Product
Rear View
CABINETS ONLY
Model No.
Cabinet Finish
Model No.
SL500DO
SL500NW
SL500NO
SL500NM
SL500DM
SL500RM
Dark Oak
Natural Walnut
Natural Oak
Natural Mahogany
Dark Mahogany
Red Mahogany
SLC500DO
SLC500NW
SLC500NO
SLC500NM
SLC500DM
SLC500RM
-
Dark Oak
Natural Walnut
Natural Oak
Natural Mahogany
Dark Mahogany
Red Mahogany
DIMENSIONAL DRAWINGS
FEATURES
TILT AND ROLL:™ The Lectern incorporates two recessed casters
within the floor base. By tilting the cabinet rearward, the Lectern can
be easily moved from location to location. Once the Lectern is returned to its vertical position, the Lectern is stationary and locked
in position.
DC OPERATION: The Lectern may be operated on DC by using the
optional rechargeable battery pack (see accessories). The battery is
automatically recharged by the built-in recharger when the Lectern
is operated on AC.
Cabinet Finish
-
25"
Reading Table:
23.5" W., 17" D.
9.25"
49"
ACCESSORIES
M941M - Auxiliary Unidirectional Dynamic Microphone. Complete
with 15ft (5 m) Cable and XLR male connector.
23"
Reading Light
Optional
Battery
Storage
Locking Storage
Compartment
q Unidirectional Dynamic Microphone
q Powerful Sound Column Speaker System
q Built-In Speech Filter Equalizer
q Volume and Tone Controls
q Output for Tape Recording Device
q Recessed Casters for Mobility
q Recessed Reading Light
q DC Operation with Optional Battery
27/12 - 12 Volt sealed rechargeable battery pack. Lectern operates
5-6 hours on each charge. Mounts inside Lectern. Two required.
26"
CV24 - 30ft. (10 m) Microphone Extension Cable complete with XLR
connectors.
Front View
18.5"
Rear View
Side View
All PASO Lecterns and Cabinets are Handcrafted in the USA
FOR ADDITIONAL INFORMATION SEE THE INDIVIDUAL ENGINEERING DATA BROCHURE
PAGE 31
Self-Standing Sound Powered Lecterns - Laminate Finish
SL 371 - 50 Watt
Class D Digital Amplifier
SOUND POWERED LECTERN
Covers an audience of up to 1000
q HIGH INTELLIGIBILITY
q SOUND COLUMN SPEAKER SYSTEM
q UNIDIRECTIONAL DYNAMIC MICROPHONE
q OUTPUT FOR TAPE RECORDING DEVICE
q BUILT-IN SPEECH FILTER
q SCRATCH AND BURN RESISTANT FINISH
q DC OPERATION WITH OPTIONAL BATTERY
Streamlined Sound Lectern for voice reinforcement in Conference and Meeting Rooms, Auditoriums, Churches, Hotels,
Motels, Schools, Clubs, Meeting Halls, etc. The handcrafted cabinet is durable and decorative, finished in either woodgrain walnut or light oak laminate. The powerful amplifier is combined with a high efficiency Sound Column Speaker
System completely integrated within the Lectern's cabinet. The result is superb voice reproduction with a minimum of
reverberation. Additional features include: Unidirectional Dynamic Microphone, shock-mount holder for the microphone,
input for second microphone, output for tape or external PA system, output for external speaker, speech equalizer with
switch, auxiliary input, volume and tone controls. The unit may operate on DC with the optional rechargeable battery.
The battery is recharged while the lectern is used on AC.
AVAILABLE WITH OR WITHOUT SOUND SYSTEM (see below for models available)
MODELS WITH SOUND
SL371W Walnut Finish
SL371K Light Oak Finish
CABINETS ONLY
SL371CW - Walnut Finish
SL371CK - Light Oak Finish
SPECIFICATIONS
Power Output: 50 Watt RMS
Microphone: Unidirectional Dynamic
Microphone Holder: Anti-shock with Gooseneck
Speaker System: 4X 8" (200mm) Heavy Duty Speakers
Inputs: 1 Mic., 1 Aux.
Outputs: Tape/Line Out, External Speaker (4 Ohm)
Controls: Mic/Aux Volume, Speech Filter, Bass & Treble
Terminations: 1/4” Phono Jacks
Supply: 100-240V 50-60 Hz AC
DC: 24-28V DC with optional Battery
Power Consumption: AC 90 VA, DC 60 W
CABINETRY
Color Finish: Woodgrain Walnut or Light Oak
ECO-Friendly
Green Product
Material: High Density Wood Compound
Finish: Formica Laminate
Front Grill: Molded with Acoustic Cloth
Dimensions: 45” H., 21” W., 14½” D. (115 X 54 X 37 cm)
Net Weight: 65 Lbs (30 Kg)
SHIPPING INFORMATION
Shipping Weight: Carton 1: 67 Lbs (30.5 Kg)
Carton 2: 25 Lbs (11.5 Kg)
Dimensions: Carton 1: 47”X14”X23” (120X36X59 cm)
Carton 2: 25”X19”X6” (63.5X49X15 cm)
Carton Volume: Carton 1: 8.8³ Ft. (0.26³ m)
Carton 2: 1.7³ Ft. (0.047³ m)
Table-Top Sound Powered Lecterns - Laminate Finish
SL 370 - 50 Watt
Class D Digital Amplifier
SOUND POWERED LECTERN
q HIGH INTELLIGIBILITY
q UNIDIRECTIONAL DYNAMIC MICROPHONE
q OUTPUT FOR TAPE RECORDING DEVICE
q BUILT-IN SPEECH FILTER WITH SWITCH
q SCRATCH AND BURN RESISTANT FINISH
q DC OPERATION WITH OPTIONAL BATTERY
Economy model, self-contained, table-top Sound Lectern for sound reinforcement in Conference and
Meeting Rooms, Schools, Motels, Private Clubs or wherever voice or music amplification is required. The
lectern is acoustically engineered to provide clear reproduction with uniform coverage. The Unidirectional
Dynamic Microphone is removable from its support on the lectern and can be used up to 15 ft. away from
the lectern. A second microphone may be connected to the lectern. The tape output provides for direct
connection to a recording device. The optional rechargeable battery permits the lectern to be used anywhere on DC power. The built-in battery recharger automatically recharges the battery while the lectern
is operating on AC power.
AVAILABLE WITH OR WITHOUT SOUND SYSTEM (see below for models available)
MODELS WITH SOUND
SL370W Walnut Finish
SL370K Light Oak Finish
CABINETS ONLY
SL370CW - Walnut Finish
SL370CK - Light Oak Finish
SPECIFICATIONS
ECO-Friendly
Green Product
PAGE 32
Power Output: 50 Watt RMS
Microphone: Unidirectional Dynamic
Microphone Holder: Anti-shock with Gooseneck
Speaker System: 8" (200mm) Heavy Duty Speaker
Inputs: 1 Mic., 1 Aux.
Outputs: Tape/Line Out, External Speaker (4 Ohm)
Controls: Mic/Aux Volume, Speech Filter, Bass & Treble
Supply: 100-240V 50-60 Hz AC
DC: 24-28V DC with optional Battery
Power Consumption: AC 90 VA, DC 60 W
Dimensions: 13¼" H., 21" W., 14½" D. (34 X 54 X 37 cm)
Net Weight: 38 lbs (18 Kg)
SHIPPING INFORMATION
Shipping Weight: 41 Lbs, (18.7 Kg)
Carton Dimensions: 24"X17"X17" (61X43X43 cm)
Carton Volume: 4.1³ Ft. (0.113³ m)
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Self-Standing Sound Powered Lecterns - Laminate Finish
SL 372 - 50 Watt
Class D Digital Amplifier
SOUND POWERED LECTERN
Covers an audience of up to 1500
q HAND POLISHED BRASS READING LIGHT
q SOUND COLUMN SPEAKER SYSTEM
q UNIDIRECTIONAL DYNAMIC MICROPHONE
q OUTPUT FOR TAPE RECORDING DEVICE
q RECESSED CASTERS FOR MOBILITY
q SCRATCH AND BURN RESISTANT FINISH
q DC OPERATION WITH OPTIONAL BATTERY
Streamlined Sound Column Lectern for voice reinforcement in Conference and Meeting Rooms, Auditoriums,
Churches, Hotels, Motels, Schools, Clubs, Meeting Halls, etc. The handcrafted cabinet is durable and decorative,
finished in either woodgrain walnut or light oak laminate with Reading Light. Two casters are recessed within the
floor base for mobility. High efficiency Sound Column Speaker System provides high voice intelligibility with a Unidirectional Dynamic Microphone, shock-mount holder, input for second microphone, output for tape or external PA
system, output for external speaker, speech equalizer with switch, auxiliary input, volume and tone controls. The
unit may operate on DC with the optional rechargeable battery pack. The battery is recharged while the lectern is
used on AC.
AVAILABLE WITH OR WITHOUT SOUND SYSTEM (see below for models available)
MODELS WITH SOUND
SL372W SL372K -
CABINETS ONLY
Walnut Finish
Light Oak Finish
SL372CW SL372CK -
Walnut Finish
Light Oak Finish
SPECIFICATIONS
Power Output: 50 Watt RMS
Microphone: Unidirectional Dynamic
Microphone Holder: Anti-shock with Gooseneck
Speaker System: 4X 8" (200mm) Heavy Duty Speakers
Inputs: 1 Mic., 1 Aux.
Outputs: Tape/Line Out, External Speaker (4 Ohm)
Controls: Mic/Aux Volume, Speech Filter, Bass & Treble
Terminations: 1/4” Phono Jacks
Supply: 100-240V 50-60 Hz AC
DC: 24-28V DC with optional Battery
Power Consumption: AC 90 VA, DC 60 W
CABINETRY
Color Finish: Woodgrain Walnut or Light Oak
ECO-Friendly
Green Product
Material: High Density Wood Compound
Finish: Formica Laminate
Reading Light: Hand Polished Solid Brass
Front Grill: Molded with Acoustic Cloth
Dimensions: 49" H., 21½" W., 18½" D. (125 X 55 X 47 cm)
Net Weight: 70 Lbs (32 Kg)
SHIPPING INFORMATION
Shipping Weight: Carton 1: 67 Lbs (30.5 Kg)
Carton 2: 40 Lbs (19 Kg)
Dimensions: Carton 1: 47"X14"X23" (120X36X59 cm)
Carton 2: 22½"X26"X14½" (58X68X37 cm)
Carton Volume: Carton 1: 8.83³ Ft. (0.26³ m) Carton 2: 5³
Ft. (0.15³ m)
Adjustable Height Sound Powered Lecterns - Laminate Finish
SL 381 - 50 Watt
Class D Digital Amplifier
SOUND POWERED LECTERN
q ADJUSTABLE HEIGHT FROM 49” TO 55”
OTHER CHARACTERISTICS SAME AS
MODEL SL 372
The SL381 is a streamlined, manually adjustable, Sound Lectern for voice reinforcement in Conference and Meeting
Rooms, Auditoriums, Churches, Hotels, Schools, Clubs, Meeting Halls, etc. The handcrafted all wood construction
is both durable and decorative, finished in either woodgrain walnut or light oak laminate and a matching acoustic
front grille. The total Lectern height is adjustable by means of a locking knob on the rear panel. The height can be
varied from 49" to 55" (125 to 140 cm) to facilitate the use by persons of different height. A hand polished brass antiglare reading light provides full illumination of the reading table. The powerful amplifier and the high efficiency Sound
Column Speaker System provide superb voice reproduction and high intelligibility with a minimum of reverberation.
Additional features include: Recessed casters for easy mobility, Unidirectional Dynamic Microphone, shock-mount
holder for the microphone, input for second microphone, output for tape or external PA system, output for external
speaker, speech equalizer with switch, auxiliary input, volume and tone controls.
MODELS WITH SOUND
SL381W Walnut Finish
SL381K Light Oak Finish
DIMENSIONAL DRAWINGS
Reading Table:
20" W., 15" D.
Light
21.5"
18.5"
CABINETS ONLY
7.00"
SL381CW SL381CK -
Height
Locking
Knob
49"
54"
48"
Optional
Battery Storage
22.5"
Front View
16.5"
Rear View
Walnut Finish
Light Oak Finish
Net Weight: 84Lbs (39 Kg)
SHIPPING INFORMATION
Shipping Weight:
Carton 1: 70 Lbs (31.8 Kg)
Carton 2: 40 Lbs (19 Kg)
C. Dimensions: Carton 1:
47"X14"X23"
(120X36X59 cm)
Side View
Carton 2:
22½"X26½"X14½"
(58X68X37 cm)
Carton Volume: Carton 1:
8.83³ Ft.
(0.26³ m)
Carton 2: 5³ Ft. (0.15³ m)
ECO-Friendly
Green Product
All PASO Lecterns and Cabinets are Handcrafted in the USA
FOR ADDITIONAL INFORMATION SEE THE INDIVIDUAL ENGINEERING DATA BROCHURE
PAGE 33
High Performance Unidirectional Electret & Dynamic Microphones
Push-to-talk, Desk Base Unidirectional Electret Microphone with integral push-to-talk switch and push-to-lock switch. The microphone is supplied with a 15-ft.
shielded cable and is attached to the base by a female XLR Connector (the male XLR Connector is built-in the base of the Microphone). The cable consists of two
conductors shielded for a balanced microphone input . Muting is provided by the VOX Circuit of the PASO Amplifier.
B 500EX
Unidirectional Electret
Push to Talk and Push to Lock Desk Base Microphone
• Low Impedance
• Push to Talk and Push to Lock Switches
• Die-Cast Base with Flexible Gooseneck
• Shock Mounted Gooseneck and Element
• Built-in XLR Male Connector
• Furnished with 15 cable and XLR (at MIC end)
Phantom Power required - 12 to 48 Volt
Element:
Frequency Response:
Polar Pattern:
Impedance:
Output Level at 1Khz:
Power Level:
Open Circuit Voltage:
Talk Switches:
Base:
Finish:
Dimensions:
Gooseneck:
Length:
Net Weight:
Electret
60 - 14,000 Hz
Cardioid
250 ohm
-57 db (0 db=1 mw/10 mbar)
-77 db .13 mV (0 db=1 V/mbar)
Push to talk Illuminated
Push to Lock Illuminated
Heavy Duty Die-Cast
Dark Grey and Silver
Base: 5" W., 6" D., Tapered, 2"
H. (127 X 153 X 51 mm)
Removable Black with XLR
18" (458 mm)
1.7Lbs (0.8 Kg)
A desirable sound system begins with a good microphone. Paso unidirectional dynamic microphones' frequency response has been tailored to provide the best
possible reproduction regardless of environmental noise, undesirable acoustics and microphone placement. Most Paso ''Handlers'' series microphones feature a
rugged die-cast zinc alloy enclosure. This mechanical solution insures high tensile strength and great resistance to shock. The dynamic element is then surrounded
by a heavy-duty woven wire mesh grille and further protected by a foam ''pop'' and windscreen. Finally the exclusive non-reflecting scratch and stain resistant
finish is electroplated on the enclosure for long lasting protection and beauty.
Model Configurations
M911F -With Female Connector*
M911M - With Male Connector*
M911X - Without Connector
M911
High Output
Unidirectional Dynamic General Purpose
* 3 pin audio connector attached at equipment end
A general purpose Unidirectional Dynamic Microphone that
offers good quality in a handsomely designed enclosure. The
high sensitivity and high output cartridge is shock mounted
to minimize handling noise. Specifically designed for voice
applications the uni pattern is particularly useful for cancelling acoustic feedback and background noise. The smooth
response is tailored to provide a crisp and clear reproduction
without annoying boominess. Other characteristics include
rugged wiremesh wind screen, On Off switch, non-reflecting
scratch resistant black electroplated finish, standard mount
stand holder, 15 ft. cable and protective carrying case.
Unidirectional Dynamic
General Purpose Public Address
Dynamic Shock Mounted
60 - 15,000 Hz
Cardioid
250 ohm
At 1,000 Hz
-55 db (0 db=1 mw/10 mbar)
-74 db .20 mV (0 db=1 V/mbar)
On- Off
Zinc Diecast
Switch:
Matte Black
Case:
6.5" (165 mm) long
Finish:
1.6" (40 mm) head diameter
Dimensions:
Accessories Included: Stand Holder 15 Ft. (5 m)
Cable, Carrying Case
11 oz (312 grams)
Net Weight:
Element:
Frequency Response:
Polar Pattern:
Impedance:
Output Level:
Power Level:
Open Circuit Voltage:
PAGE 34
A general purpose, Unidirectional Dynamic Microphone particularly suited for sound reinforcement and recording. The
rugged high sensitivity and high output cartridge is shock
mounted to minimize handling noise. Specifically designed
for voice applications the uni pattern is particularly useful for
cancelling acoustic feedback and unwanted background
noise. Other characteristics include metal wind screen, On
Off switch, matte black non-reflecting scratch and stain resistant electroplated finish, standard mount stand holder and
a 15 ft. detachable cable.
Element:
Frequency Response:
Polar Pattern:
Impedance:
Output Level:
Power Level:
Open Circuit Voltage:
Switch:
Case:
Finish:
Dimensions:
Dynamic Shock Mounted
60 - 14,000 Hz
Cardioid
250 ohm
At 1,000 Hz
-55 db (0 db=1 mw/10 mbar)
-74 db .20 mV (0 db=1 V/mbar)
On- Off
Zinc Diecast
Matte Black
6.5" (165 mm) Long
2.15" (54 mm) head diam.
Accessories Included: Tapered Stand Holder 15 Ft. (5
m) Cable, Carrying Case
Net Weight:
11 oz (312 grams)
High Output
M921
Model Configurations
M921F -With Female Connector*
M921M - With Male Connector*
M921X - Without Connector
* 3 pin audio connector attached at equipment end
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
High Performance Unidirectional Dynamic Microphones
Model Configurations
M941F -With Female Connector*
M941M - With Male Connector*
M941X - Without Connector
Hypercardioid
* 3 pin audio connector attached at equipment end
A Super Grade Unidirectional Dynamic Microphone that is both rugged and handsomely styled. A doubly
redundant, highly damped suspension system completely isolates the cartridge from the outer case,
greatly minimizing handling noise. The Hypercardioid pattern prevents acoustic feedback in difficult applications. Front to back rejection exceeds 25 db at 1 Khz. permitting greater usable output with less
"howling problems" and background noise. The high frequency response characteristics add the right
amount of ''brightness'' for a realistic "presence effect". Other features include On-Off switch, black nonreflecting scratch resistant electroplated finish, anti-shock holder, 15-ft. cable and carrying case.
Element:
Frequency Response:
Polar Pattern:
Impedance:
Output Level:
Power Level:
Open Circuit Voltage:
Switch:
Case:
Finish:
Dimensions:
Dynamic Shock Mounted
50 - 18,000 Hz
Hypercardioid
250 ohm
At 1,000 Hz
-57 db (0 db=1 mw/10 mbar)
-77 db 0.13 Mv (0 db=1 V/mbar)
On- Off
Zinc Diecast
Matte Black
6.5" (165 mm) long, 2.15" (54 mm)
head diameter
Accessories Included: Tapered Stand Holder 5/8-27
15 Ft. (5 m) Cable, Carrying Case
Net Weight:
13.5 oz (348 grams)
Hypercardioid
M941
Unidirectional Dynamic Super Grade, Vocal, Stage
Element:
Frequency Response:
Polar Pattern:
Impedance:
Output Level:
Power Level:
Open Circuit Voltage:
Switch:
Case:
Finish:
Dimensions:
Accessories Included:
Net Weight:
Dynamic Shock Mounted
50 - 17,000 Hz
Hypercardioid
250 ohm
At 1,000 Hz
-57 db (0 db=1 mw/10 mbar)
-77 db .013 Mv (0 db=1 V/mbar)
On- Off
Zinc Diecast
Matte Black
7" (178 mm) long
2" (54 mm) head diameter
Tapered Stand Holder 5/-27
15 Ft. (5 m) Cable, Carrying Case
12.2 oz (315 grams)
M951
Unidirectional Dynamic
Professional, Studio, Stage, Vocal
Model Configurations
M951F -With Female Connector*
M951M - With Male Connector*
M951X - Without Connector
* 3 pin audio connector attached at equipment end
Produced for those who need a hand-held, high performance professional microphone. Big bass sound for
close "miking", wide frequency response for crisp sound, rugged design, built-in pop filter and high output.
A doubly redundant, highly damped suspension system completely isolates the cartridge from the outer case,
greatly minimizing handling noise. Hypercardioid design provides front to back rejection greater than 25 db
at 1 Khz. permitting higher usable output with less "howling problems" and background noise. Other features
include high efficiency anti-pop filter, On-Off switch, black non-reflecting scratch resistant electroplated finish,
stand holder, 15 ft. detachable cable and carrying case.
Ultracardioid
M960
Neodymium Ultracardiod Dynamic
Professional, Studio, Stage, Vocal
Model Configurations
M960F -With Female Connector*
M960M - With Male Connector*
M960X - Without Connector
* 3 pin audio connector attached at equipment end
q Neodymium Magnet with
almi-chromate coating
q Ultracardioid Pattern
q Shock Mount Element
q High Output Level
q Leather-Touch non-reflectant Finish
q Dual Wind Screen
q Heavy-Duty Zinc Die-Cast Enclosure
q
q
q
q
q
q
q
q
Rugged Outer Screen Mesh
Wide Frequency Response
High Unidirectional Sensitivity
High anti-pop Capability
Integral Gold Plated Connector
Patented Shock-Mount Stand Holder
Detachable 15 ft. Cable with XLR
Protective Carrying Case included
Element:
Magnet:
Frequency Response:
Polar Pattern:
Impedance:
Output Level:
Dynamic Shock Mounted
Neodymium with almi-chromate coating
45-19,000 Hz
Ultracardioid
250 ohm nominal
At 1,000 Hz
(1 Pascal= 10 dynes/cm² = 10 mbar)
Power Level: -51 db (0 db=1 mW/Pascal)
Open Circuit Voltage: 2.9 Mv/Pascal
Phasing:
Positive pressure on diaphragm produces
a positive voltage on
Pin 2 of XLR connector
Enclosure:
Heavy-Duty Zinc Die-Cast
Finish:
Leather-Touch TM Black
Dimensions:
172 mm (6.75") long
55 mm (2.2") head diam.
Output Connector:
Integral 3 pin XLRM gold plated
Net Weight:
310 grams (11 Oz) less cable
ACCESSORIES
WMP-3F - Female XLR
Connector on a wall mount
plate. Standard single gang
plate. Connector: XLR Female with lock. Brushed
stainless steel. Plate Size:
4½” H., 2¾” W., 1¼” D.
(115X70X32 mm) Complete
with mounting screws.
FOR ADDITIONAL INFORMATION SEE THE INDIVIDUAL ENGINEERING DATA BROCHURE
S1 - Adjustable microphone holder. Accepts
microphones with up to
1" (2.5 cm) diameter.
Standard threaded brass
insert. Black finish.
S12 - Anti-shock microphone holder. Drastically
minimizes stand handling noise. Accepts microphones with up to
1¼" (3.1 cm) diameter.
Standard
threaded
brass insert. Black finish.
PAGE 35
Speakers - Speaker Assemblies
Line Transformers - Accessories
Wide Range Dual Cone
Wide Range High Efficiency
Full Range Coaxial
SP570 with 25/70V Transformer
SP1070 with 25/70V Transformer
SP810CXT with 25/70V Transformer
Wide Range Dual Cone Speaker
SP500 - 8” Dual Cone Speaker Only
Wide Range Dual Cone Speaker
SP1000 - 8” Dual Cone Speaker Only
2 Way Coaxial Speaker
SP810CX - 8” Coaxial, Speaker Only
Power Handling:
Music Power Max.:
Frequency Response:
Sensitivity:
Speaker Type:
Power Handling:
Music Power Max.:
Frequency Response:
Sensitivity:
Speaker Type:
Power Handling:
Music Power Max. :
Frequency Response:
Sensitivity:
Speaker Type:
Tweeter:
Magnet:
Flux Density:
Impedance:
Net Weight Each:
Standard Packaging:
Magnet:
Flux Density:
Impedance:
Net Weight Each:
Standard Packaging:
10 Watt RMS
15 Watt
50 - 18 Khz
96 db at 1 W - 1 Meter
8" (200 mm)
Dual Cone
5.4 Oz (153 g) Ceramic
9,600 Gauss
8 ohm
1.2 Lbs (0.6 Kg)
12 Pcs per Carton
Magnet:
Flux Density:
Impedance:
Net Weight Each:
Standard Packaging:
15 Watt RMS
25 Watt
50 - 18 Khz
97 db at 1 W - 1 Meter
8" (200 mm)
Dual Cone
10 Oz (285 g) Ceramic
10,700 Gauss
8 ohm
1.7 Lbs (0.8 Kg)
12 Pcs per Carton
20 Watt RMS
30 Watt
40 - 20 Khz
98 db at 1 W - 1 Meter
8" (200 mm) Coaxial
Polypropylene
10 Oz (285 g) Ceramic
10,700 Gauss
8 ohm
2.5 Lbs (1.3 Kg)
12 Pcs per Carton
SP570 - Speaker with 25/70 V Transf.
SP1070 - Speaker with 25/70 V Transf.
SP810CXT - Spkr with 25/70 V Transf.
Speaker assembly. 8” Wide Range, Dual
Cone Speaker with pre-mounted 5 Watt, 25
Volt and 70 Volt Line Transformer.
Speaker assembly. 8” Wide Range, Dual
Cone Speaker with pre-mounted 5 Watt, 25
Volt and 70 Volt Line Transformer.
Speaker assembly. 8” Full Range, Coaxial
Speaker with pre-mounted 10 Watt, 25 Volt
and 70 Volt Line Transformer.
Same as SP1000
Same as SP810CX
Same as SP500
Transformer Mounted
25 Volt
70 Volt
Net Weight Each:
Standard Packaging:
Gross Carton Weight:
Transformer Mounted
Power Taps:
Power Taps:
5-2.5-1.25-0.625 Watt
5-2.5-1.25-0.625 Watt
1.7 Lbs (0.8 Kg)
12 Pcs per Carton
24.2 Lbs (11 Kg)
25 Volt
70 Volt
Net Weight Each:
Standard Packaging:
Gross Carton Weight:
5-2.5-1.25-0.625 Watt
5-2.5-1.25-0.625 Watt
2.2 Lbs (1.0 Kg)
12 Pcs per Carton
29.7 Lbs (13.5 Kg)
25 Volt
70 Volt
Net Weight Each:
Standard Packaging:
Gross Carton Weight:
Line Transformer
T2570/10 - 10 Watt, 25/70V
Ceiling Speaker Back Box
ERD8 - Closed Steel Enclosure
Wide response for background/foreground
music applications. Low insertion loss. High
quality. Colored Wire Pigtail.
Ceiling loudspeaker back box. Heavy-gauge
steel construction. Complete with mounting
straps and J-nuts for attaching Ceiling Baffles.
Knockouts for armored cable mount. Integral
Polymer damper. UL Listed
Power Handling:
Line Voltage:
Power Taps:
25 Volt:
70 Volt:
Secondary Impedance:
Termination:
Insertion Loss:
PAGE 36
10 Watt
25 Volt and 70.7 Volt
Transformer Mounted
Power Taps:
10-5-2.5-1.25 Watt
10-5-2.5-1.25 Watt
2.8 Lbs (1.3 Kg)
12 Pcs per Carton
34.75 Lbs (15.8 Kg)
Ceiling Speaker Tile Bridge
SSB3 - Tile Bridge Assembly
Ceiling loudspeaker tile bridge. Permits
mounting of ceiling speaker over suspended
ceiling frame. Prevents sagging of tile by
supporting speaker weight over frame.
10 - 5 - 2.5 - 1.25 W
10 - 5 - 2.5 - 1.25 W
8 ohm
Stripped Wire Pigtail
1.0 db
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Ceiling Speaker Assemblies - Line Attenuators
Accessories
Wide Range Dual Cone
Wide Range High Efficiency
Full Range Coaxial
C15TST with 25/70V Transformer
C16TST with 25/70V Transformer
C20CXTS with 25/70V Transformer
Wide Range Dual Cone Speaker
Full Range Coaxial Speaker
C15TST - 8” Dual Cone Speaker, 5.4 Oz
C16TST - 8” Dual Cone Speaker, 10 Oz Mag-
C20CXTS - 8” Coaxial Speaker, 10 Oz Mag-
Magnet with 25/70 Volt Transformer and White
Steel Baffle
net with 25/70 Volt Transformer and White
Steel Baffle
net with 25/70 Volt Transformer and White
Steel Baffle
Recessed mount Ceiling Speaker assembly.
8” Wide Range, Dual Cone Speaker with
Line Transformer. White Steel Baffle. Supplied with mounting hardware.
Recessed mount Ceiling Speaker assembly.
8” Wide Range, Dual Cone Speaker with
Line Transformer. White Steel Baffle. Supplied with mounting hardware.
Recessed mount Ceiling Speaker assembly.
8” Full Range, 2 Way Coaxial Speaker with
Tweeter and with Line Transformer. White
Steel Baffle. Supplied with mounting hardware.
Assembly Model No.:
Power Handling:
Music Power Max.:
Frequency Response:
Sensitivity:
Speaker Model:
Speaker Type:
Magnet:
Flux Density:
Line Transformer:
Power Taps:
Dimensions:
Assembly Model No.:
Power Handling:
Music Power Max.:
Frequency Response:
Sensitivity:
Speaker Model:
Speaker Type:
Magnet:
Flux Density:
Line Transformer:
Power Taps:
Dimensions:
Assembly Model No.:
Power Handling:
Music Power Max.:
Frequency Response:
Sensitivity:
Speaker Model:
Speaker Type:
Tweeter:
Magnet:
Flux Density:
Line Transformer:
Power Taps:
Dimensions:
Wide Range Dual Cone Speaker
Net Weight:
Baffle Finish:
Baffle Material:
Standard Packaging:
Master Carton:
C15TST
10 Watt RMS
15 Watt
50 - 18 Khz
96 db at 1 W - 1 Meter
SP570
8" (200 mm) Dual Cone
5.4 Oz (153 g) Ceramic
9,600 Gauss
5 Watt - 25/70 Volt
5-2.5-1.25 Watt
13" (330 mm) Diameter
3.5" (89 mm) Deep
2.4 Lbs (1.1 Kg)
White
Steel
Individually Boxed
12 Pcs per Carton
Net Weight:
Baffle Finish:
Baffle Material:
Standard Packaging:
Master Carton:
C16TST
15 Watt RMS
25 Watt
50 - 18 Khz
97 db at 1 W - 1 Meter
SP1070
8" (200 mm) Dual Cone
10 Oz (285 g) Ceramic
10,700 Gauss
5 Watt - 25/70 Volt
5-2.5-1.25 Watt
13" (330 mm) Diameter
3.5" (89 mm) Deep
3 Lbs (1.5 Kg)
White
Steel
Individually Boxed
12 Pcs per Carton
Net Weight:
Baffle Finish:
Baffle Material:
Standard Packaging:
Master Carton:
C20CXTS
20 Watt RMS
30 Watt
40 - 20 Khz
98 db at 1 W - 1 Meter
SP810CXT
8" (200 mm) Dual Cone
Polypropylene
10 Oz (285 g) Ceramic
10,700 Gauss
10 Watt - 25/70 Volt
10-5-2.5-1.25 Watt
13" (330 mm) Diameter
3.5" (89 mm) Deep
4 Lbs (1.8 Kg)
White
Steel
Individually Boxed
12 Pcs per Carton
Speaker Line Attenuators
GENERAL PURPOSE AUTO TRANSFORMER ATTENUATORS - High quality 20 and 100 watt auto transformer series provides
wide frequency response, low insertion loss and reliable performance for volume control application in 25 Volt and 70 Volt
systems. Attenuation rate of 3 db steps is accomplished with a non-shorting rotary switch with ten steps plus positive off
position. Contacts are silver plated for noise-free operation. Selection includes one or two gang sized models with stainless
steel plate, stamped and filled dial scale and skirted black knob. Available in mono configuration only.
VC20
Model
No.
VC20
VC100
Power
Rating
20 Watt
100 Watt
VC100
Model
VC20
A
Positions
10-Off
10-Off
Attenuation
Per Step
3 db
3 db
Total
Attenuation
30 db
30 db
Insertion
Loss
.4 db
.6 db
Mounting
Size
1 Gang
2 Gang
DIMENSIONAL SPECIFICATIONS
B
4½” (114mm) 2-1/8” (54 mm)
VC100 4½” (114 MM) 2-5/8” (67 mm)
C
D
E
1½” (38mm)
2¾” (70 mm)
1¾” (45 mm)
2” (51 mm)
4½” (116 mm)
2½” (64 mm)
FOR ADDITIONAL INFORMATION SEE THE INDIVIDUAL ENGINEERING DATA BROCHURE
PAGE 37
Horn Speakers - Power Megaphones
Surface
or Flange-Mounting
Loudspeakers
30 Watt Reflex
Rectangle
SpeakerReflex
- 25V
- 70V - 100V Transformer
Paging and talk back reflex speakers for low to medium power output levels in paging, emergency alarm, protective signalling, intercom systems,
public address and mobile applications both indoor or outdoor. The speakers employ a new high compression driver system that provides high
efficiency, peak-free response and superior sound penetration and range. The wide-angle design of the rectangle type further improves the
acoustic efficiency by concentrating more power where it is needed. High impact molded construction is virtually immune to extremes in
weather conditions, deterioration and abuse. The exclusive dual swivel support of the model TR30/T permits continuous horizontal and vertical
orientation of the speaker. Superior sound penetration. Rugged construction. Weatherproof.
Model TR30T
Frequency in Hertz
SPECIFICATIONS
30 Watt, General Purpose, Rectangle Speaker
with 25V-70V-100V Transformer
and Swivel Mounting Support
A rectangular double reentrant paging and talk-back speaker engineered for paging, public address, indoor or outdoor emergency alarm, protective signalling and intercom system applications. It is primarily recommended for use in indoor or outdoor areas where maximum speech
intelligibility and sound coverage are required. It incorporates a high efficiency driver with a new
high compression acoustic coupling system, a heavier narrow gap magnetic structure and a precision self-aligning driver unit assembly. Efficiency and effective sound coverage have been
greatly improved for even better intelligibility and voice penetration. High impact ABS construction with die-cast driver and transformer housing. Built-in 25 Volt, 70 Volt and 100 Volt line transformer with rotary power tap selector. Armored cable adapter is optional.
ACCESSORIES
ACB30 - Armored Cable Bracket. Attaches on to Speaker
Input Terminals Housing.
Power Handling:
Frequency Response:
Power Taps 100 Volt:
Power Taps 70 Volt:
Power Taps 25 Volt:
Power Taps Selector:
Talk Back Impedance:
Dispersion Angle:
Sensitivity (SPL):
Sensitivity as Microphone:
Horn Material:
Driver Housing Material:
Terminals:
Dimensions:
Color Finish:
Net Weight:
30 Watts continuous
275 to 14,000Hz (nominal)
30, 15, 7.7, 4.0 Watt
30, 15, 7.5, 3.7, 1.8 Watt
15, 7.5, 3.7, 1.8 Watt
Rotary Screwdriver adjustable
45 ohm (Tap No. 7)
120° Hor., 60° Ver.
125 db at 30 watt (peak)
120 db at 30 Watt at 1 meter
106 db at 1 meter, 1 Watt
-23 dbm
High Impact ABS
Zinc Die-Cast
Screw Type with cover
11"W 6¾"H 12¾"D
280 X 172 X 324 mm
Beige
5.5 lbs (2.5 Kg)
MEGAVOICE® - Power Megaphone
The Paso TA25W is a ruggedly constructed, Power Megaphone. The powerful amplifier utilizes
a reflex horn speaker to provide a narrow sound dispersion with greater power concentration,
sound penetration and effective range. It may be used for indoors applications or outdoors in
any weather. The reduced dimensions of the Megaphone permit greater mobility and freedom
of movement. Virtually indestructible, the non-corrosive, shockproof construction will withstand
the abuse encountered in portable use. A hand carrying strap is provided. Operates on eight
size C batteries. Alkaline batteries recommended. Batteries not included.
25 Watt Power Megaphone with Signal Alarm, 800 Yard Range
TA25W
Power Output:
Microphone:
Speaker System:
Signal Alarm:
Controls:
25 Watt
Unidirectional Dynamic
Reflex Horn
Whistle Tone
Volume, Hand-grip On-Off Switch,
Signal Alarm Switch
Supply:
8 Size C Batteries
ž RUGGED HIGH-IMPACT CONSTRUCTION
Battery Life:
Approx.. 15 Hours Alkaline Batt.
UNIDIRECTIONAL DYNAMIC MICROPHONE
Carrying Strap:
Furnished
Color Finish:
White Bell with Navy Blue Body
BUILT-IN SIGNAL ALARM
Dimensions:
Bell 9” (23 cm), 15” (38 cm) L.
HIGH EFFICIENCY REFLEX SPEAKER SYSTEM
Net Weight:
3.5 Lbs (1.6 Kg) less batteries
Carton 1: 5 Lbs (2.3 Kg)
OPERATES WITH SELF-CONTAINED BATTERIES Shipping Weight:
Dimensions: Carton: 1: 17”X10”X10” (44X26X26 cm)
COMPLETE WITH CARRYING STRAP
Carton Volume: Carton:1: 0.99³ Ft. (0.028³ m)
PAGE 38
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
40 WATT - 2-Way Wide Range Indoor/Outdoor
Waterproof Speaker System - Ideal for Music and Paging
RUGGED ABS CONSTRUCTION - STAINLESS STEEL HARDWARE AND GRILL
CAN OPERATE OUTDOORS INDEFINITELY
C55DMSTW - 40 WATT - 25-70-100 V WATERPROOF SPEAKER SYSTEM - COLOR FINISH WHITE
A waterproof speaker system created specifically for background or foreground music systems and paging.The watertight design allows extended use indoors in
environments experiencing high humidity or the presence of moisture such as Ice Skating Rinks, Sporting Arenas, Indoor Pools, Kitchens, Manufacturing Facilities,
etc. or outdoors, the speaker can be used literally everywhere, on walls, poles, roofs, ground, etc.. The wide frequency response and the acoustically balanced enclosure provide superb music reproduction and high efficiency. It is highly recommended for Patio Speaker applications as an outdoor speaker for Restaurants,
Gardens, Around Pools, Shopping Malls, Marinas, etc. This ruggedly constructed, fully damped speaker utilizes a heavy-duty, fiberglass, acoustic suspension transducer and a hard polymer dome tweeter for long life and constant performance with time. Ergonomically engineered, the C55DMST can be rapidly mounted on
ceiling, wall or shelf, etc. with the mounting bracket provided or can be used in arrays. Dynamically styled the enclosure is finished in designer Off-White with a
metal mesh speaker grille. Supplied with an adjustable sliding mounting bracket and vandal resistant hardware. Built-in 25 - 70 - 100 Volt Line Transformer.
Specifications
Power Output:
Continuous Program:
Frequency Response:
Applications:
Line Transformer:
Power Taps:
25 Volt
70 Volt
Dispersion Angle:
Sound Pressure Level:
Transducer Size:
Type:
Tweeter:
Dimensional Drawings
8"
204 mm
3"
77 mm
8"
204 mm
Housing Material:
Speaker Grille;
Termination:
Mounting:
Hardware:
Dimensions:
Net Weight:
40 Watt RMS long term
80 Watt Music
80 - 22,000 Hz
Waterproof Outdoor use, long term
Music Reproduction and Paging
Integral, Wide Frequency Response
40 - 10 - 5 - 2.5 - 1.2 - 0.7 Watt
40 - 20 - 10 - 5 - 2.5 Watt
70º
110 db Anechoic Environment
4’ on axis at rated output
95 db 1 Watt/1 Meter on axis
6” Heavy Duty
High Efficiency, Fiberglass with Polyester Urethane Cone Surround
1” Neodymium Magnet Hard
Polymer Dome
ABS - meets UL 94 VO
High Impact Stainless Steel
Multicolor Wire Pigtail
Adjustable Bracket Supplied
Stainless Steel Vandal Resistant
8” W., 8½” D.(204 X 216 mm)
6 Lb. (2.75 Kg)
7"
178 mm
8.5"
216 mm
● Waterproof for Outdoor Applications
● Foreground/Background Music Systems
● High Quality Music Reproduction
● Sound Reinforcement Systems
● Environmental Music Systems
● High Efficiency Music or Paging
● Can be Used Outdoors Indefinitely
● 2-Way Air Suspension, Wide Range System
● Rugged Fiberglass Transducer with Tweeter
● Dual Gasket Watertight Construction
FOR ADDITIONAL INFORMATION SEE THE INDIVIDUAL ENGINEERING DATA BROCHURE
UL94VO
● High Impact Stainless Steel Grille Protector
● Built-in 25V-70V Multi-Tap Line Transformer
● Single Cable Multi-Wire Tap Selector
● Controlled Sound Radiation Pattern
● Adjustable Mounting Bracket Supplied
● Vandal Resistant Stainless Steel Hardware
● Neodymium Magnet Hard Polymer Dome Tweeter
● Wide Frequency Response Transformer
● Available In White
● Rugged ABS UL 94VO Enclosure
PAGE 39
Open as PDF
Similar pages