Wireshark User`s Guide - For Wireshark 2.1

Wireshark User’s Guide
For Wireshark 2.1
Ulf Lamping <ulf.lamping[AT]web.de>
Richard Sharpe, NS Computer Software and
Services P/L <rsharpe[AT]ns.aus.com>
Ed Warnicke <hagbard[AT]physics.rutgers.edu>
Wireshark User’s Guide: For Wireshark 2.1
by Ulf Lamping, Richard Sharpe, and Ed Warnicke
Copyright © 2004-2014 Ulf Lamping, Richard Sharpe, Ed Warnicke
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 or any
later version published by the Free Software Foundation.
All logos and trademarks in this document are property of their respective owner.
Preface ...................................................................................................................... viii
1. Foreword ....................................................................................................... viii
2. Who should read this document? ....................................................................... viii
3. Acknowledgements .......................................................................................... viii
4. About this document ......................................................................................... ix
5. Where to get the latest copy of this document? ....................................................... ix
6. Providing feedback about this document ............................................................... ix
1. Introduction .............................................................................................................. 1
1.1. What is Wireshark? ......................................................................................... 1
1.1.1. Some intended purposes ......................................................................... 1
1.1.2. Features ............................................................................................... 1
1.1.3. Live capture from many different network media ........................................ 2
1.1.4. Import files from many other capture programs .......................................... 2
1.1.5. Export files for many other capture programs ............................................. 2
1.1.6. Many protocol dissectors ........................................................................ 2
1.1.7. Open Source Software ........................................................................... 2
1.1.8. What Wireshark is not ........................................................................... 2
1.2. System Requirements ....................................................................................... 2
1.2.1. Microsoft Windows ............................................................................... 3
1.2.2. UNIX / Linux ....................................................................................... 3
1.3. Where to get Wireshark .................................................................................... 4
1.4. A brief history of Wireshark ............................................................................. 4
1.5. Development and maintenance of Wireshark ........................................................ 5
1.6. Reporting problems and getting help ................................................................... 5
1.6.1. Website ............................................................................................... 5
1.6.2. Wiki ................................................................................................... 5
1.6.3. Q&A Site ............................................................................................ 5
1.6.4. FAQ ................................................................................................... 6
1.6.5. Mailing Lists ........................................................................................ 6
1.6.6. Reporting Problems ............................................................................... 6
1.6.7. Reporting Crashes on UNIX/Linux platforms ............................................. 7
1.6.8. Reporting Crashes on Windows platforms ................................................. 7
2. Building and Installing Wireshark ................................................................................. 8
2.1. Introduction .................................................................................................... 8
2.2. Obtaining the source and binary distributions ....................................................... 8
2.3. Installing Wireshark under Windows .................................................................. 8
2.3.1. Installation Components ......................................................................... 8
2.3.2. Additional Tasks ................................................................................... 9
2.3.3. Install Location ..................................................................................... 9
2.3.4. Installing WinPcap ................................................................................ 9
2.3.5. Windows installer command line options ................................................. 10
2.3.6. Manual WinPcap Installation ................................................................. 10
2.3.7. Update Wireshark ................................................................................ 10
2.3.8. Update WinPcap ................................................................................. 10
2.3.9. Uninstall Wireshark ............................................................................. 10
2.3.10. Uninstall WinPcap ............................................................................. 11
2.4. Installing Wireshark under OS X ...................................................................... 11
2.5. Building Wireshark from source under UNIX ..................................................... 11
2.6. Installing the binaries under UNIX ................................................................... 11
2.6.1. Installing from RPM’s under Red Hat and alike ........................................ 12
2.6.2. Installing from deb’s under Debian, Ubuntu and other Debian derivatives ....... 12
2.6.3. Installing from portage under Gentoo Linux ............................................. 12
2.6.4. Installing from packages under FreeBSD ................................................. 12
2.7. Troubleshooting during the install on Unix ......................................................... 13
2.8. Building from source under Windows ............................................................... 13
3. User Interface .......................................................................................................... 14
3.1. Introduction .................................................................................................. 14
3.2. Start Wireshark ............................................................................................. 14
iii
Wireshark User’s Guide
3.3. The Main window ..........................................................................................
3.3.1. Main Window Navigation .....................................................................
3.4. The Menu .....................................................................................................
3.5. The “File” menu ............................................................................................
3.6. The “Edit” menu ...........................................................................................
3.7. The “View” menu ..........................................................................................
3.8. The “Go” menu .............................................................................................
3.9. The “Capture” menu ......................................................................................
3.10. The “Analyze” menu ....................................................................................
3.11. The “Statistics” menu ...................................................................................
3.12. The “Telephony” menu .................................................................................
3.13. The “Tools” menu ........................................................................................
3.14. The “Internals” menu ....................................................................................
3.15. The “Help” menu .........................................................................................
3.16. The “Main” toolbar ......................................................................................
3.17. The “Filter” toolbar ......................................................................................
3.18. The “Packet List” pane .................................................................................
3.19. The “Packet Details” pane .............................................................................
3.20. The “Packet Bytes” pane ...............................................................................
3.21. The Statusbar ..............................................................................................
4. Capturing Live Network Data .....................................................................................
4.1. Introduction ..................................................................................................
4.2. Prerequisites ..................................................................................................
4.3. Start Capturing ..............................................................................................
4.4. The “Capture Interfaces” dialog box .................................................................
4.5. The “Capture Options” dialog box ....................................................................
4.5.1. Capture frame .....................................................................................
4.5.2. Capture File(s) frame ...........................................................................
4.5.3. Stop Capture… frame ..........................................................................
4.5.4. Display Options frame .........................................................................
4.5.5. Name Resolution frame ........................................................................
4.5.6. Buttons ..............................................................................................
4.6. The “Edit Interface Settings” dialog box ............................................................
4.7. The “Compile Results” dialog box ....................................................................
4.8. The “Add New Interfaces” dialog box ...............................................................
4.8.1. Add or remove pipes ...........................................................................
4.8.2. Add or hide local interfaces ..................................................................
4.8.3. Add or hide remote interfaces ................................................................
4.9. The “Remote Capture Interfaces” dialog box ......................................................
4.9.1. Remote Capture Interfaces ....................................................................
4.9.2. Remote Capture Settings ......................................................................
4.10. The “Interface Details” dialog box ..................................................................
4.11. Capture files and file modes ...........................................................................
4.12. Link-layer header type ..................................................................................
4.13. Filtering while capturing ...............................................................................
4.13.1. Automatic Remote Traffic Filtering ......................................................
4.14. While a Capture is running … ........................................................................
4.14.1. Stop the running capture .....................................................................
4.14.2. Restart a running capture ....................................................................
5. File Input, Output, and Printing ..................................................................................
5.1. Introduction ..................................................................................................
5.2. Open capture files ..........................................................................................
5.2.1. The “Open Capture File” dialog box .......................................................
5.2.2. Input File Formats ...............................................................................
5.3. Saving captured packets ..................................................................................
5.3.1. The “Save Capture File As” dialog box ...................................................
5.3.2. Output File Formats .............................................................................
5.4. Merging capture files .....................................................................................
iv
14
15
15
17
19
21
25
26
27
28
30
30
31
31
32
36
37
37
38
38
40
40
40
40
41
42
42
43
44
44
44
44
45
46
46
46
47
47
47
48
48
49
49
50
50
52
52
53
53
54
54
54
54
55
57
57
58
58
Wireshark User’s Guide
5.4.1. The “Merge with Capture File” dialog box ............................................... 59
5.5. Import hex dump ........................................................................................... 59
5.5.1. The “Import from Hex Dump” dialog box ............................................... 60
5.6. File Sets ....................................................................................................... 61
5.6.1. The “List Files” dialog box ................................................................... 61
5.7. Exporting data ............................................................................................... 62
5.7.1. The “Export as Plain Text File” dialog box .............................................. 62
5.7.2. The “Export as PostScript File” dialog box .............................................. 62
5.7.3. The "Export as CSV (Comma Separated Values) File" dialog box ................. 63
5.7.4. The "Export as C Arrays (packet bytes) file" dialog box ............................. 63
5.7.5. The "Export as PSML File" dialog box ................................................... 63
5.7.6. The "Export as PDML File" dialog box ................................................... 63
5.7.7. The "Export selected packet bytes" dialog box .......................................... 64
5.7.8. The "Export Objects" dialog box ............................................................ 64
5.8. Printing packets ............................................................................................. 64
5.8.1. The “Print” dialog box ......................................................................... 65
5.9. The “Packet Range” frame .............................................................................. 65
5.10. The Packet Format frame .............................................................................. 66
6. Working with captured packets ................................................................................... 67
6.1. Viewing packets you have captured .................................................................. 67
6.2. Pop-up menus ............................................................................................... 67
6.2.1. Pop-up menu of the “Packet List” column header ...................................... 67
6.2.2. Pop-up menu of the “Packet List” pane ................................................... 68
6.2.3. Pop-up menu of the “Packet Details” pane ............................................... 70
6.3. Filtering packets while viewing ........................................................................ 73
6.4. Building display filter expressions .................................................................... 74
6.4.1. Display filter fields .............................................................................. 74
6.4.2. Comparing values ................................................................................ 74
6.4.3. Combining expressions ......................................................................... 75
6.4.4. Membership Operator. .......................................................................... 76
6.4.5. A common mistake .............................................................................. 76
6.5. The “Filter Expression” dialog box ................................................................... 77
6.6. Defining and saving filters .............................................................................. 78
6.7. Defining and saving filter macros ..................................................................... 78
6.8. Finding packets ............................................................................................. 79
6.8.1. The “Find Packet” dialog box ................................................................ 79
6.8.2. The “Find Next” command ................................................................... 79
6.8.3. The “Find Previous” command .............................................................. 79
6.9. Go to a specific packet ................................................................................... 79
6.9.1. The “Go Back” command ..................................................................... 80
6.9.2. The “Go Forward” command ................................................................ 80
6.9.3. The “Go to Packet” dialog box .............................................................. 80
6.9.4. The “Go to Corresponding Packet” command ........................................... 80
6.9.5. The “Go to First Packet” command ........................................................ 80
6.9.6. The “Go to Last Packet” command ......................................................... 80
6.10. Marking packets .......................................................................................... 80
6.11. Ignoring packets .......................................................................................... 81
6.12. Time display formats and time references ......................................................... 81
6.12.1. Packet time referencing ...................................................................... 82
7. Advanced Topics ...................................................................................................... 83
7.1. Introduction .................................................................................................. 83
7.2. Following TCP streams ................................................................................... 83
7.2.1. The “Follow TCP Stream” dialog box ..................................................... 83
7.3. Expert Information ......................................................................................... 84
7.3.1. Expert Info Entries .............................................................................. 84
7.3.2. “Expert Info” dialog ............................................................................ 85
7.3.3. “Colorized” Protocol Details Tree .......................................................... 86
7.3.4. “Expert” Packet List Column (optional) ................................................... 86
v
Wireshark User’s Guide
7.4. Time Stamps ................................................................................................. 86
7.4.1. Wireshark internals .............................................................................. 86
7.4.2. Capture file formats ............................................................................. 86
7.4.3. Accuracy ........................................................................................... 87
7.5. Time Zones .................................................................................................. 87
7.5.1. Set your computer’s time correctly! ........................................................ 88
7.5.2. Wireshark and Time Zones ................................................................... 88
7.6. Packet Reassembly ......................................................................................... 89
7.6.1. What is it? ......................................................................................... 89
7.6.2. How Wireshark handles it ..................................................................... 90
7.7. Name Resolution ........................................................................................... 90
7.7.1. Name Resolution drawbacks .................................................................. 90
7.7.2. Ethernet name resolution (MAC layer) .................................................... 91
7.7.3. IP name resolution (network layer) ......................................................... 91
7.7.4. TCP/UDP port name resolution (transport layer) ....................................... 92
7.8. Checksums ................................................................................................... 92
7.8.1. Wireshark checksum validation .............................................................. 92
7.8.2. Checksum offloading ........................................................................... 93
8. Statistics ................................................................................................................. 94
8.1. Introduction .................................................................................................. 94
8.2. The Summary window .................................................................................... 94
8.3. The "Protocol Hierarchy" window .................................................................... 95
8.4. Conversations ................................................................................................ 95
8.4.1. The “Conversations” window ................................................................ 95
8.5. Endpoints ..................................................................................................... 96
8.5.1. The "Endpoints" window ...................................................................... 97
8.6. The "IO Graphs" window ................................................................................ 97
8.7. Service Response Time ................................................................................... 98
8.7.1. The "Service Response Time DCE-RPC" window ..................................... 99
8.8. Compare two capture files ............................................................................... 99
8.9. WLAN Traffic Statistics ................................................................................ 100
8.10. The protocol specific statistics windows ......................................................... 100
9. Telephony ............................................................................................................. 101
9.1. Introduction ................................................................................................. 101
9.2. RTP Analysis .............................................................................................. 101
9.3. IAX2 Analysis ............................................................................................. 101
9.4. VoIP Calls .................................................................................................. 101
9.5. LTE MAC Traffic Statistics ........................................................................... 101
9.6. LTE RLC Traffic Statistics ............................................................................ 102
9.7. The protocol specific statistics windows ........................................................... 102
10. Customizing Wireshark .......................................................................................... 103
10.1. Introduction ............................................................................................... 103
10.2. Start Wireshark from the command line .......................................................... 103
10.3. Packet colorization ...................................................................................... 109
10.4. Control Protocol dissection .......................................................................... 110
10.4.1. The “Enabled Protocols” dialog box .................................................... 110
10.4.2. User Specified Decodes .................................................................... 111
10.4.3. Show User Specified Decodes ............................................................ 111
10.5. Preferences ................................................................................................ 112
10.5.1. Interface Options ............................................................................. 112
10.6. Configuration Profiles ................................................................................. 112
10.7. User Table ................................................................................................ 114
10.8. Display Filter Macros .................................................................................. 114
10.9. ESS Category Attributes .............................................................................. 114
10.10. GeoIP Database Paths ................................................................................ 115
10.11. IKEv2 decryption table .............................................................................. 115
10.12. Object Identifiers ...................................................................................... 116
10.13. PRES Users Context List ........................................................................... 116
vi
Wireshark User’s Guide
10.14. SCCP users Table ..................................................................................... 116
10.15. SMI (MIB and PIB) Modules ..................................................................... 117
10.16. SMI (MIB and PIB) Paths .......................................................................... 117
10.17. SNMP Enterprise Specific Trap Types .......................................................... 117
10.18. SNMP users Table .................................................................................... 117
10.19. Tektronix K12xx/15 RF5 protocols Table ...................................................... 118
10.20. User DLTs protocol table ........................................................................... 118
A. Wireshark Messages ............................................................................................... 119
A.1. Packet List Messages ................................................................................... 119
A.1.1. [Malformed Packet] ........................................................................... 119
A.1.2. [Packet size limited during capture] ...................................................... 119
A.2. Packet Details Messages ............................................................................... 119
A.2.1. [Response in frame: 123] ................................................................... 119
A.2.2. [Request in frame: 123] ..................................................................... 119
A.2.3. [Time from request: 0.123 seconds] ...................................................... 120
A.2.4. [Stream setup by PROTOCOL (frame 123)] .......................................... 120
B. Files and Folders ................................................................................................... 121
B.1. Capture Files .............................................................................................. 121
B.1.1. Libpcap File Contents ........................................................................ 121
B.1.2. Not Saved in the Capture File ............................................................. 121
B.2. Configuration Files and Folders ..................................................................... 122
B.2.1. Protocol help configuration ................................................................. 126
B.3. Windows folders ......................................................................................... 127
B.3.1. Windows profiles .............................................................................. 127
B.3.2. Windows roaming profiles .................................................................. 128
B.3.3. Windows temporary folder .................................................................. 128
C. Protocols and Protocol Fields ................................................................................... 129
D. Related command line tools ..................................................................................... 130
D.1. Introduction ................................................................................................ 130
D.2. tshark: Terminal-based Wireshark .................................................................. 130
D.3. tcpdump: Capturing with tcpdump for viewing with Wireshark .......................... 131
D.4. dumpcap: Capturing with dumpcap for viewing with Wireshark ......................... 132
D.5. capinfos: Print information about capture files .................................................. 133
D.6. rawshark: Dump and analyze network traffic. ................................................... 134
D.7. editcap: Edit capture files ............................................................................. 134
D.8. mergecap: Merging multiple capture files into one ............................................ 139
D.9. text2pcap: Converting ASCII hexdumps to network captures ............................... 140
D.10. reordercap: Reorder a capture file ................................................................ 142
11. This Document’s License (GPL) .............................................................................. 143
vii
Preface
1. Foreword
Wireshark is one of those programs that many network managers would love to be able to use, but
they are often prevented from getting what they would like from Wireshark because of the lack of
documentation.
This document is part of an effort by the Wireshark team to improve the usability of Wireshark.
We hope that you find it useful and look forward to your comments.
2. Who should read this document?
The intended audience of this book is anyone using Wireshark.
This book will explain all the basics and also some of the advanced features that Wireshark provides.
As Wireshark has become a very complex program since the early days, not every feature of Wireshark
may be explained in this book.
This book is not intended to explain network sniffing in general and it will not provide details about
specific network protocols. A lot of useful information regarding these topics can be found at the
Wireshark Wiki at https://wiki.wireshark.org/
By reading this book, you will learn how to install Wireshark, how to use the basic elements of the
graphical user interface (such as the menu) and what’s behind some of the advanced features that
are not always obvious at first sight. It will hopefully guide you around some common problems that
frequently appear for new (and sometimes even advanced) users of Wireshark.
3. Acknowledgements
The authors would like to thank the whole Wireshark team for their assistance. In particular, the authors
would like to thank:
• Gerald Combs, for initiating the Wireshark project and funding to do this documentation.
• Guy Harris, for many helpful hints and a great deal of patience in reviewing this document.
• Gilbert Ramirez, for general encouragement and helpful hints along the way.
The authors would also like to thank the following people for their helpful feedback on this document:
• Pat Eyler, for his suggestions on improving the example on generating a backtrace.
• Martin Regner, for his various suggestions and corrections.
• Graeme Hewson, for a lot of grammatical corrections.
The authors would like to acknowledge those man page and README authors for the Wireshark
project from who sections of this document borrow heavily:
• Scott Renfro from whose mergecap man page Section D.8, “mergecap: Merging multiple capture
files into one” is derived.
• Ashok Narayanan from whose text2pcap man page Section D.9, “text2pcap: Converting ASCII
hexdumps to network captures” is derived.
viii
Preface
4. About this document
This book was originally developed by Richard Sharpe with funds provided from the Wireshark Fund.
It was updated by Ed Warnicke and more recently redesigned and updated by Ulf Lamping.
It was originally written in DocBook/XML and converted to AsciiDoc by Gerald Combs.
You will find some specially marked parts in this book:
This is a warning
You should pay attention to a warning, otherwise data loss might occur.
This is a note
A note will point you to common mistakes and things that might not be obvious.
This is a tip
Tips are helpful for your everyday work using Wireshark.
5. Where to get the latest copy of this
document?
The latest copy of this documentation can always be found at https://www.wireshark.org/docs/.
6. Providing feedback about this document
Should you have any feedback about this document, please send it to the authors through wiresharkdev[AT]wireshark.org.
ix
Chapter 1. Introduction
1.1. What is Wireshark?
Wireshark is a network packet analyzer. A network packet analyzer will try to capture network packets
and tries to display that packet data as detailed as possible.
You could think of a network packet analyzer as a measuring device used to examine what’s going
on inside a network cable, just like a voltmeter is used by an electrician to examine what’s going on
inside an electric cable (but at a higher level, of course).
In the past, such tools were either very expensive, proprietary, or both. However, with the advent of
Wireshark, all that has changed.
Wireshark is perhaps one of the best open source packet analyzers available today.
1.1.1. Some intended purposes
Here are some examples people use Wireshark for:
• Network administrators use it to troubleshoot network problems
• Network security engineers use it to examine security problems
• Developers use it to debug protocol implementations
• People use it to learn network protocol internals
Beside these examples Wireshark can be helpful in many other situations too.
1.1.2. Features
The following are some of the many features Wireshark provides:
• Available for UNIX and Windows.
• Capture live packet data from a network interface.
• Open files containing packet data captured with tcpdump/WinDump, Wireshark, and a number of
other packet capture programs.
• Import packets from text files containing hex dumps of packet data.
• Display packets with very detailed protocol information.
• Save packet data captured.
• Export some or all packets in a number of capture file formats.
• Filter packets on many criteria.
• Search for packets on many criteria.
• Colorize packet display based on filters.
• Create various statistics.
• …and a lot more!
1
Introduction
However, to really appreciate its power you have to start using it.
Figure 1.1, “Wireshark captures packets and lets you examine their contents.” shows Wireshark having
captured some packets and waiting for you to examine them.
Figure 1.1. Wireshark captures packets and lets you examine their contents.
1.1.3. Live capture from many different network media
Wireshark can capture traffic from many different network media types - and despite its name including wireless LAN as well. Which media types are supported, depends on many things like the
operating system you are using. An overview of the supported media types can be found at https://
wiki.wireshark.org/CaptureSetup/NetworkMedia.
1.1.4. Import files from many other capture programs
Wireshark can open packets captured from a large number of other capture programs. For a list of
input formats see Section 5.2.2, “Input File Formats”.
1.1.5. Export files for many other capture programs
Wireshark can save packets captured in a large number of formats of other capture programs. For a
list of output formats see Section 5.3.2, “Output File Formats”.
1.1.6. Many protocol dissectors
There are protocol dissectors (or decoders, as they are known in other products) for a great many
protocols: see Appendix C, Protocols and Protocol Fields.
1.1.7. Open Source Software
Wireshark is an open source software project, and is released under the GNU General Public License
(GPL). You can freely use Wireshark on any number of computers you like, without worrying about
license keys or fees or such. In addition, all source code is freely available under the GPL. Because
of that, it is very easy for people to add new protocols to Wireshark, either as plugins, or built into
the source, and they often do!
1.1.8. What Wireshark is not
Here are some things Wireshark does not provide:
• Wireshark isn’t an intrusion detection system. It will not warn you when someone does strange
things on your network that he/she isn’t allowed to do. However, if strange things happen, Wireshark
might help you figure out what is really going on.
• Wireshark will not manipulate things on the network, it will only "measure" things from it.
Wireshark doesn’t send packets on the network or do other active things (except for name
resolutions, but even that can be disabled).
1.2. System Requirements
The amount of resources Wireshark needs depends on your environment and on the size of the capture
file you are analyzing. The values below should be fine for small to medium-sized capture files no
more than a few hundred MB. Larger capture files will require more memory and disk space.
2
Introduction
Busy networks mean large captures
Working with a busy network can easily produce huge capture files. Capturing on a
gigabit or even 100 megabit network can produce hundreds of megabytes of capture data
in a short time. A fast processor, lots of memory and disk space is always a good idea.
If Wireshark runs out of memory it will crash. See https://wiki.wireshark.org/KnownBugs/
OutOfMemory for details and workarounds.
Although Wireshark captures packets using a separate process the main interface is single-threaded
and won’t benefit much from multi-core systems.
1.2.1. Microsoft Windows
• The current version of Wireshark should support any version of Windows that is still within its
extended support lifetime. At the time of writing this includes Windows 10, 8, 7, Vista, Server 2016,
Server 2012, Server 2008 R2, and Server 2008.
• Any modern 64-bit AMD64/x86-64 or 32-bit x86 processor.
• 400 MB available RAM. Larger capture files require more RAM.
• 300 MB available disk space. Capture files require additional disk space.
• 1024×768 (1280×1024 or higher recommended) resolution with at least 16 bit color. 8 bit color
should work but user experience will be degraded. Power users will find multiple monitors useful.
• A supported network card for capturing
• Ethernet. Any card supported by Windows should work. See the wiki pages on Ethernet capture
and offloading for issues that may affect your environment.
• 802.11. See the Wireshark wiki page. Capturing raw 802.11 information may be difficult without
special equipment.
• Other media. See https://wiki.wireshark.org/CaptureSetup/NetworkMedia
Older versions of Windows which are outside Microsoft’s extended lifecycle support window are no
longer supported. It is often difficult or impossible to support these systems due to circumstances
beyond our control, such as third party libraries on which we depend or due to necessary features that
are only present in newer versions of Windows (such as hardened security or memory management).
Wireshark 1.12 was the last release branch to support Windows Server 2003. Wireshark 1.10 was
the last branch to officially support Windows XP. See the Wireshark release lifecycle page for more
details.
1.2.2. UNIX / Linux
Wireshark runs on most UNIX and UNIX-like platforms including OS X and Linux. The system
requirements should be comparable to the Windows values listed above.
Binary packages are available for most Unices and Linux distributions including the following
platforms:
• Apple OS X
• Debian GNU/Linux
• FreeBSD
• Gentoo Linux
3
Introduction
• HP-UX
• Mandriva Linux
• NetBSD
• OpenPKG
• Red Hat Enterprise/Fedora Linux
• Sun Solaris/i386
• Sun Solaris/SPARC
• Canonical Ubuntu
If a binary package is not available for your platform you can download the source and try to build it.
Please report your experiences to wireshark-dev[AT]wireshark.org.
1.3. Where to get Wireshark
You can get the latest copy of the program from the Wireshark website at https://www.wireshark.org/
download.html. The download page should automatically highlight the appropriate download for your
platform and direct you to the nearest mirror. Official Windows and OS X installers are signed by the
Wireshark Foundation.
A new Wireshark version typically becomes available each month or two.
If you want to be notified about new Wireshark releases you should subscribe to the wiresharkannounce mailing list. You will find more details in Section 1.6.5, “Mailing Lists”.
1.4. A brief history of Wireshark
In late 1997 Gerald Combs needed a tool for tracking down network problems and wanted to learn
more about networking so he started writing Ethereal (the original name of the Wireshark project) as
a way to solve both problems.
Ethereal was initially released after several pauses in development in July 1998 as version 0.2.0. Within
days patches, bug reports, and words of encouragement started arriving and Ethereal was on its way
to success.
Not long after that Gilbert Ramirez saw its potential and contributed a low-level dissector to it.
In October, 1998 Guy Harris was looking for something better than tcpview so he started applying
patches and contributing dissectors to Ethereal.
In late 1998 Richard Sharpe, who was giving TCP/IP courses, saw its potential on such courses and
started looking at it to see if it supported the protocols he needed. While it didn’t at that point new
protocols could be easily added. So he started contributing dissectors and contributing patches.
The list of people who have contributed to the project has become very long since then, and almost
all of them started with a protocol that they needed that Wireshark or did not already handle. So they
copied an existing dissector and contributed the code back to the team.
In 2006 the project moved house and re-emerged under a new name: Wireshark.
In 2008, after ten years of development, Wireshark finally arrived at version 1.0. This release was the
first deemed complete, with the minimum features implemented. Its release coincided with the first
Wireshark Developer and User Conference, called Sharkfest.
In 2015 Wireshark 2.0 was released, which featured a new user interface.
4
Introduction
1.5. Development and maintenance of
Wireshark
Wireshark was initially developed by Gerald Combs. Ongoing development and maintenance of
Wireshark is handled by the Wireshark team, a loose group of individuals who fix bugs and provide
new functionality.
There have also been a large number of people who have contributed protocol dissectors to Wireshark,
and it is expected that this will continue. You can find a list of the people who have contributed code
to Wireshark by checking the about dialog box of Wireshark, or at the authors page on the Wireshark
web site.
Wireshark is an open source software project, and is released under the GNU General Public License
(GPL) version 2. All source code is freely available under the GPL. You are welcome to modify
Wireshark to suit your own needs, and it would be appreciated if you contribute your improvements
back to the Wireshark team.
You gain three benefits by contributing your improvements back to the community:
1. Other people who find your contributions useful will appreciate them, and you will know that you
have helped people in the same way that the developers of Wireshark have helped people.
2. The developers of Wireshark might improve your changes even more, as there’s always room for
improvement. Or they may implement some advanced things on top of your code, which can be
useful for yourself too.
3. The maintainers and developers of Wireshark will maintain your code as well, fixing it when API
changes or other changes are made, and generally keeping it in tune with what is happening with
Wireshark. So if Wireshark is updated (which is done often), you can get a new Wireshark version
from the website and your changes will already be included without any effort for you.
The Wireshark source code and binary kits for some platforms are all available on the download page
of the Wireshark website: https://www.wireshark.org/download.html.
1.6. Reporting problems and getting help
If you have problems or need help with Wireshark there are several places that may be of interest to
you (well, besides this guide of course).
1.6.1. Website
You will find lots of useful information on the Wireshark homepage at https://www.wireshark.org/.
1.6.2. Wiki
The Wireshark Wiki at https://wiki.wireshark.org/ provides a wide range of information related to
Wireshark and packet capture in general. You will find a lot of information not part of this user’s
guide. For example, there is an explanation how to capture on a switched network, an ongoing effort
to build a protocol reference and a lot more.
And best of all, if you would like to contribute your knowledge on a specific topic (maybe a network
protocol you know well) you can edit the wiki pages by simply using your web browser.
1.6.3. Q&A Site
The Wireshark Q&A site at https://ask.wireshark.org/ offers a resource where questions and answers
come together. You have the option to search what questions were asked before and what answers
5
Introduction
were given by people who knew about the issue. Answers are graded, so you can pick out the best
ones easily. If your question hasn’t been discussed before you can post one yourself.
1.6.4. FAQ
The Frequently Asked Questions lists often asked questions and their corresponding answers.
Read the FAQ
Before sending any mail to the mailing lists below, be sure to read the FAQ. It will often
answer any questions you might have. This will save yourself and others a lot of time.
Keep in mind that a lot of people are subscribed to the mailing lists.
You will find the FAQ inside Wireshark by clicking the menu item Help/Contents and selecting the
FAQ page in the dialog shown.
An online version is available at the Wireshark website: https://www.wireshark.org/faq.html. You
might prefer this online version, as it’s typically more up to date and the HTML format is easier to use.
1.6.5. Mailing Lists
There are several mailing lists of specific Wireshark topics available:
wireshark-announce
This mailing list will inform you about new program releases, which
usually appear about every 4-8 weeks.
wireshark-users
This list is for users of Wireshark. People post questions about
building and using Wireshark, others (hopefully) provide answers.
wireshark-dev
This list is for Wireshark developers. If you want to start developing
a protocol dissector, join this list.
You can subscribe to each of these lists from the Wireshark web site: https://www.wireshark.org/lists/.
From there, you can choose which mailing list you want to subscribe to by clicking on the Subscribe/
Unsubscribe/Options button under the title of the relevant list. The links to the archives are included
on that page as well.
The lists are archived
You can search in the list archives to see if someone asked the same question some time
before and maybe already got an answer. That way you don’t have to wait until someone
answers your question.
1.6.6. Reporting Problems
Note
Before reporting any problems, please make sure you have installed the latest version
of Wireshark.
When reporting problems with Wireshark please supply the following information:
1. The version number of Wireshark and the dependent libraries linked with it, such as Qt or GLib.
You can obtain this from Wireshark’s about box or the command wireshark -v.
2. Information about the platform you run Wireshark on.
3. A detailed description of your problem.
6
Introduction
4. If you get an error/warning message, copy the text of that message (and also a few lines before and
after it, if there are some) so others may find the place where things go wrong. Please don’t give
something like: "I get a warning while doing x" as this won’t give a good idea where to look.
Don’t send large files
Do not send large files (> 1 MB) to the mailing lists. Just place a note that further data
is available on request. Large files will only annoy a lot of people on the list who are
not interested in your specific problem. If required you will be asked for further data by
the persons who really can help you.
Don’t send confidential information!
If you send capture files to the mailing lists be sure they don’t contain any sensitive or
confidential information like passwords or personally identifiable information (PII).
1.6.7. Reporting Crashes on UNIX/Linux platforms
When reporting crashes with Wireshark it is helpful if you supply the traceback information along
with the information mentioned in "Reporting Problems".
You can obtain this traceback information with the following commands on UNIX or Linux (note the
backticks):
$ gdb `whereis wireshark | cut -f2 -d: | cut -d' ' -f2` core >& backtrace.txt
backtrace
^D
If you do not have gdb available, you will have to check out your operating system’s debugger.
Mail backtrace.txt to wireshark-dev[AT]wireshark.org.
1.6.8. Reporting Crashes on Windows platforms
The Windows distributions don’t contain the symbol files (.pdb) because they are very large. You
can download them separately at https://www.wireshark.org/download/win32/all-versions and https:
//www.wireshark.org/download/win64/all-versions
7
Chapter 2. Building and Installing
Wireshark
2.1. Introduction
As with all things there must be a beginning and so it is with Wireshark. To use Wireshark you must
first install it. If you are running Windows or OS X you can download an official release at https://
www.wireshark.org/download.html, install it, and skip the rest of this chapter.
If you are running another operating system such as Linux or FreeBSD you might want to install from
source. Several Linux distributions offer Wireshark packages but they commonly ship out-of-date
versions. No other versions of UNIX ship Wireshark so far. For that reason, you will need to know
where to get the latest version of Wireshark and how to install it.
This chapter shows you how to obtain source and binary packages and how to build Wireshark from
source should you choose to do so.
The following are the general steps you would use:
1. Download the relevant package for your needs, e.g. source or binary distribution.
2. Compile the source into a binary if needed. This may involve building and/or installing other
necessary packages.
3. Install the binaries into their final destinations.
2.2. Obtaining the source and binary
distributions
You can obtain both source and binary distributions from the Wireshark web site: https://
www.wireshark.org/. Select the download link and then select the desired binary or source package.
Download all required files
If you are building Wireshark from source you will In general, unless you have already
downloaded Wireshark before, you will most likely need to download several source
packages if you are building Wireshark from source. This is covered in more detail
below.
Once you have downloaded the relevant files, you can go on to the next step.
2.3. Installing Wireshark under Windows
Windows installers contain the platform and version, e.g. Wireshark-winxx-2.1.x.exe. The Wireshark
installer includes WinPcap which is required for packet capture.
Simply download the Wireshark installer from: https://www.wireshark.org/download.html and
execute it. Official packages are signed by the Wireshark Foundation. You can choose to install
several optional components and select the location of the installed package. The default settings are
recommended for most users.
2.3.1. Installation Components
On the Choose Components page of the installer you can select from the following:
8
Building and Installing Wireshark
• Wireshark - The network protocol analyzer that we all know and mostly love.
• TShark - A command-line network protocol analyzer. If you haven’t tried it you should.
• Wireshark 1 Legacy - The old (GTK+) user interface in case you need it.
• Plugins & Extensions - Extras for the Wireshark and TShark dissection engines
• Dissector Plugins - Plugins with some extended dissections.
• Tree Statistics Plugins - Extended statistics.
• Mate - Meta Analysis and Tracing Engine - User configurable extension(s) of the display filter
engine, see https://wiki.wireshark.org/Mate for details.
• SNMP MIBs - SNMP MIBs for a more detailed SNMP dissection.
• Tools - Additional command line tools to work with capture files
• Editcap - Reads a capture file and writes some or all of the packets into another capture file.
• Text2Pcap - Reads in an ASCII hex dump and writes the data into a pcap capture file.
• Reordercap - Reorders a capture file by timestamp.
• Mergecap - Combines multiple saved capture files into a single output file.
• Capinfos - Provides information on capture files.
• Rawshark - Raw packet filter.
• User’s Guide - Local installation of the User’s Guide. The Help buttons on most dialogs will require
an internet connection to show help pages if the User’s Guide is not installed locally.
2.3.2. Additional Tasks
• Start Menu Shortcuts - Add some start menu shortcuts.
• Desktop Icon - Add a Wireshark icon to the desktop.
• Quick Launch Icon - add a Wireshark icon to the Explorer quick launch toolbar.
• Associate file extensions to Wireshark - Associate standard network trace files to Wireshark.
2.3.3. Install Location
By default Wireshark installs into %ProgramFiles%\Wireshark on 32-bit Windows and
%ProgramFiles64%\Wireshark on 64-bit Windows. This expands to C:\Program Files
\Wireshark on most systems.
2.3.4. Installing WinPcap
The Wireshark installer contains the latest WinPcap installer.
If you don’t have WinPcap installed you won’t be able to capture live network traffic but you will
still be able to open saved capture files. By default the latest version of WinPcap will be installed.
If you don’t wish to do this or if you wish to reinstall WinPcap you can check the Install WinPcap
box as needed.
For more information about WinPcap see https://www.winpcap.org/ and https://wiki.wireshark.org/
WinPcap.
9
Building and Installing Wireshark
2.3.5. Windows installer command line options
For special cases, there are some command line parameters available:
• /S runs the installer or uninstaller silently with default values. The silent installer will not install
WinPCap.
• /desktopicon installation of the desktop icon, =yes - force installation, =no - don’t install,
otherwise use default settings. This option can be useful for a silent installer.
• /quicklaunchicon installation of the quick launch icon, =yes - force installation, =no - don’t
install, otherwise use default settings.
• /D sets the default installation directory ($INSTDIR), overriding InstallDir and InstallDirRegKey.
It must be the last parameter used in the command line and must not contain any quotes even if
the path contains spaces.
• /NCRC disables the CRC check. We recommend against using this flag.
Example:
> Wireshark-win64-wireshark-2.0.5.exe /NCRC /S /desktopicon=yes /quicklaunchicon=no /D=C:\Program Fi
Running the installer without any parameters shows the normal interactive installer.
2.3.6. Manual WinPcap Installation
As mentioned above, the Wireshark installer takes care of installing WinPcap. The following is only
necessary if you want to use a different version than the one included in the Wireshark installer, e.g.
because a new WinPcap version was released.
Additional WinPcap versions (including newer alpha or beta releases) can be downloaded from the
main WinPcap site: https://www.winpcap.org/. The Installer for Windows supports modern Windows
operating systems.
2.3.7. Update Wireshark
By default the offical Windows package will check for new versions and notify you when they are
available. If you have the Check for updates preference disabled or if you run Wireshark in an isolated
environment you should subcribe to the wireshark-announce mailing list. See Section 1.6.5, “Mailing
Lists” for details on subscribing to this list.
New versions of Wireshark are usually released every four to six weeks. Updating Wireshark is done
the same way as installing it. Simply download and start the installer exe. A reboot is usually not
required and all your personal settings remain unchanged.
2.3.8. Update WinPcap
New versions of WinPcap are less frequently available. You will find WinPcap update instructions the
WinPcap web site at https://www.winpcap.org/. You may have to reboot your machine after installing
a new WinPcap version.
2.3.9. Uninstall Wireshark
You can uninstall Wireshark using the Programs and Features control panel. Select the "Wireshark"
entry to start the uninstallation procedure.
The Wireshark uninstaller provides several options for removal. The default is to remove the core
components but keep your personal settings and WinPcap. WinPcap is left installed by default in case
other programs need it.
10
Building and Installing Wireshark
2.3.10. Uninstall WinPcap
You can uninstall WinPcap independently of Wireshark using the WinPcap entry in the Programs
and Features control panel. Remember that if you uninstall WinPcap you won’t be able to capture
anything with Wireshark.
2.4. Installing Wireshark under OS X
The official OS X packages are distributed as disk images (.dmg) containing the application installer.
To install Wireshark simply open the disk image and run the enclosed installer.
The installer package includes Wireshark, its related command line utilities, and a launch daemon that
adjusts capture permissions at system startup. See the included Read me first file for more details.
2.5. Building Wireshark from source under
UNIX
Building Wireshark requires the proper build environment including a compiler and many supporting
libraries. See the Developer’s Guide at https://www.wireshark.org/docs/ for more information.
Use the following general steps to build Wireshark from source under UNIX or Linux:
1. Unpack the source from its compressed tar file. If you are using Linux or your version of UNIX
uses GNU tar you can use the following command:
$ tar xaf wireshark-2.0.5.tar.bz2
In other cases you will have to use the following commands:
$ bzip2 -d wireshark-2.0.5.tar.bz2
$ tar xf wireshark-2.0.5.tar
2. Change directory to the Wireshark source directory.
$ cd wireshark-2.0.5
3. Configure your source so it will build correctly for your version of UNIX. You can do this with
the following command:
$ ./configure
If this step fails you will have to rectify the problems and rerun configure. Troubleshooting
hints are provided in Section 2.7, “Troubleshooting during the install on Unix”.
4. Build the sources.
$ make
5. Install the software in its final destination.
$ make install
Once you have installed Wireshark with make install above, you should be able to run it by entering
wireshark.
2.6. Installing the binaries under UNIX
In general installing the binary under your version of UNIX will be specific to the installation methods
used with your version of UNIX. For example, under AIX, you would use smit to install the Wireshark
binary package, while under Tru64 UNIX (formerly Digital UNIX) you would use setld.
11
Building and Installing Wireshark
2.6.1. Installing from RPM’s under Red Hat and alike
Building RPMs from Wireshark’s source code results in several packages (most distributions follow
the same system):
• The wireshark package contains the core Wireshark libraries and command-line tools.
• The wireshark-qt package contains the Qt-based GUI.
• The wireshark-gtk (formerly wireshark-gnome) package contains the legacy Gtk+ based
GUI.
Many distributions use yum or a similar package management tool to make installation of software
(including its dependencies) easier. If your distribution uses yum, use the following command to install
Wireshark together with the Qt GUI:
yum install wireshark wireshark-qt
If you’ve built your own RPMs from the Wireshark sources you can install them by running, for
example:
rpm -ivh wireshark-2.0.0-1.x86_64.rpm wireshark-qt-2.0.0-1.x86_64.rpm
If the above command fails because of missing dependencies, install the dependencies first, and then
retry the step above.
2.6.2. Installing from deb’s under Debian, Ubuntu and
other Debian derivatives
If you can just install from the repository then use
$ aptitude install wireshark
Aptitude should take care of all of the dependency issues for you.
Use the following command to install downloaded Wireshark deb’s under Debian:
$ dpkg -i wireshark-common_2.0.5.0-1_i386.deb wireshark_wireshark-2.0.5.0-1_i386.deb
dpkg doesn’t take care of all dependencies, but reports what’s missing.
Capturing requires privileges
By installing Wireshark packages non-root users won’t gain rights automatically to
capture packets. To allow non-root users to capture packets follow the procedure
described in /usr/share/doc/wireshark-common/README.Debian
2.6.3. Installing from portage under Gentoo Linux
Use the following command to install Wireshark under Gentoo Linux with all of the extra features:
$ USE="adns gtk ipv6 portaudio snmp ssl kerberos threads selinux" emerge wireshark
2.6.4. Installing from packages under FreeBSD
Use the following command to install Wireshark under FreeBSD:
$ pkg_add -r wireshark
pkg_add should take care of all of the dependency issues for you.
12
Building and Installing Wireshark
2.7. Troubleshooting during the install on
Unix
A number of errors can occur during the installation process. Some hints on solving these are provided
here.
If the configure stage fails you will need to find out why. You can check the file config.log in
the source directory to find out what failed. The last few lines of this file should help in determining
the problem.
The standard problems are that you do not have a required development package on your system or
that the development package isn’t new enough. Note that installing a library package isn’t enough.
You need to install its development package as well. configure will also fail if you do not have
libpcap (at least the required include files) on your system.
If you cannot determine what the problems are, send an email to the wireshark-dev mailing list
explaining your problem. Include the output from config.log and anything else you think is
relevant such as a trace of the make stage.
2.8. Building from source under Windows
We strongly recommended that you use the binary installer for Windows unless you want to start
developing Wireshark on the Windows platform.
For further information how to build Wireshark for Windows from the sources see the Developer’s
Guide at https://www.wireshark.org/docs/
You may also want to have a look at the Development Wiki (https://wiki.wireshark.org/Development)
for the latest available development documentation.
13
Chapter 3. User Interface
3.1. Introduction
By now you have installed Wireshark and are most likely keen to get started capturing your first
packets. In the next chapters we will explore:
• How the Wireshark user interface works
• How to capture packets in Wireshark
• How to view packets in Wireshark
• How to filter packets in Wireshark
• … and many other things!
3.2. Start Wireshark
You can start Wireshark from your shell or window manager.
Power user tip
When starting Wireshark it’s possible to specify optional settings using the command
line. See Section 10.2, “Start Wireshark from the command line” for details.
In the following chapters a lot of screenshots from Wireshark will be shown. As Wireshark runs on
many different platforms with many different window managers, different styles applied and there
are different versions of the underlying GUI toolkit used, your screen might look different from the
provided screenshots. But as there are no real differences in functionality these screenshots should
still be well understandable.
3.3. The Main window
Let’s look at Wireshark’s user interface. Figure 3.1, “The Main window” shows Wireshark as you
would usually see it after some packets are captured or loaded (how to do this will be described later).
Figure 3.1. The Main window
Wireshark’s main window consists of parts that are commonly known from many other GUI programs.
1. The menu (see Section 3.4, “The Menu”) is used to start actions.
2. The main toolbar (see Section 3.16, “The “Main” toolbar”) provides quick access to frequently
used items from the menu.
3. The filter toolbar (see Section 3.17, “The “Filter” toolbar”) provides a way to directly manipulate
the currently used display filter (see Section 6.3, “Filtering packets while viewing”).
4. The packet list pane (see Section 3.18, “The “Packet List” pane”) displays a summary of each packet
captured. By clicking on packets in this pane you control what is displayed in the other two panes.
5. The packet details pane (see Section 3.19, “The “Packet Details” pane”) displays the packet selected
in the packet list pane in more detail.
14
User Interface
6. The packet bytes pane (see Section 3.20, “The “Packet Bytes” pane”) displays the data from the
packet selected in the packet list pane, and highlights the field selected in the packet details pane.
7. The statusbar (see Section 3.21, “The Statusbar”) shows some detailed information about the
current program state and the captured data.
Tip
The layout of the main window can be customized by changing preference settings. See
Section 10.5, “Preferences” for details!
3.3.1. Main Window Navigation
Packet list and detail navigation can be done entirely from the keyboard. Table 3.1, “Keyboard
Navigation” shows a list of keystrokes that will let you quickly move around a capture file. See
Table 3.5, “Go menu items” for additional navigation keystrokes.
Table 3.1. Keyboard Navigation
Accelerator
Description
Tab, Shift+Tab
Move between screen elements, e.g. from the
toolbars to the packet list to the packet detail.
Down
Move to the next packet or detail item.
Up
Move to the previous packet or detail item.
Ctrl+Down, F8
Move to the next packet, even if the packet list
isn’t focused.
Ctrl+Up, F7
Move to the previous packet, even if the packet
list isn’t focused.
Ctrl+.
Move to the next packet of the conversation
(TCP, UDP or IP)
Ctrl+,
Move to the previous packet of the conversation
(TCP, UDP or IP)
Left
In the packet detail, closes the selected tree item.
If it’s already closed, jumps to the parent node.
Right
In the packet detail, opens the selected tree item.
Shift+Right
In the packet detail, opens the selected tree item
and all of its subtrees.
Ctrl+Right
In the packet detail, opens all tree items.
Ctrl+Left
In the packet detail, closes all tree items.
Backspace
In the packet detail, jumps to the parent node.
Return, Enter
In the packet detail, toggles the selected tree
item.
Help → About Wireshark → Keyboard Shortcuts will show a list of all shortcuts in the main window.
Additionally, typing anywhere in the main window will start filling in a display filter.
3.4. The Menu
Wireshark’s main menu is located either at the top of the main window (Windows, Linux) or at the
top of your main screen (OS X). An example is shown in Figure 3.2, “The Menu”.
15
User Interface
Note
Some menu items will be disabled (greyed out( if the corresponding feature isn’t
available. For example, you cannot save a capture file if you haven’t captured or loaded
any packets.
Figure 3.2. The Menu
The main menu contains the following items:
File
This menu contains items to open and merge capture files, save, print, or export
capture files in whole or in part, and to quit the Wireshark application. See
Section 3.5, “The “File” menu”.
Edit
This menu contains items to find a packet, time reference or mark one or more
packets, handle configuration profiles, and set your preferences; (cut, copy, and
paste are not presently implemented). See Section 3.6, “The “Edit” menu”.
View
This menu controls the display of the captured data, including colorization of
packets, zooming the font, showing a packet in a separate window, expanding
and collapsing trees in packet details, …. See Section 3.7, “The “View” menu”.
Go
This menu contains items to go to a specific packet. See Section 3.8, “The “Go”
menu”.
Capture
This menu allows you to start and stop captures and to edit capture filters. See
Section 3.9, “The “Capture” menu”.
Analyze
This menu contains items to manipulate display filters, enable or disable the
dissection of protocols, configure user specified decodes and follow a TCP
stream. See Section 3.10, “The “Analyze” menu”.
Statistics
This menu contains items to display various statistic windows, including a
summary of the packets that have been captured, display protocol hierarchy
statistics and much more. See Section 3.11, “The “Statistics” menu”.
Telephony
This menu contains items to display various telephony related statistic windows,
including a media analysis, flow diagrams, display protocol hierarchy statistics
and much more. See Section 3.12, “The “Telephony” menu”.
Wireless
The items in this menu show Bluetooth and IEEE 802.11 wireless statistics.
Tools
This menu contains various tools available in Wireshark, such as creating Firewall
ACL Rules. See Section 3.13, “The “Tools” menu”.
Help
This menu contains items to help the user, e.g. access to some basic help, manual
pages of the various command line tools, online access to some of the webpages,
and the usual about dialog. See Section 3.15, “The “Help” menu”.
Each of these menu items is described in more detail in the sections that follow.
Shortcuts make life easier
Most common menu items have keyboard shortcuts. For example, you can press the
Control (or Strg in German) and the K keys together to open the “Capture Options”
dialog.
16
User Interface
3.5. The “File” menu
The Wireshark file menu contains the fields shown in Table 3.2, “File menu items”.
Figure 3.3. The “File” Menu
Table 3.2. File menu items
Menu Item
Accelerator
Description
Open…
Ctrl+O
This shows the file open dialog
box that allows you to load
a capture file for viewing. It
is discussed in more detail in
Section 5.2.1, “The “Open
Capture File” dialog box”.
Open Recent
This lets you open recently
opened capture files. Clicking
on one of the submenu items
will open the corresponding
capture file directly.
Merge…
This menu item lets you merge
a capture file into the currently
loaded one. It is discussed in
more detail in Section 5.4,
“Merging capture files”.
Import from Hex Dump…
This menu item brings up the
import file dialog box that
allows you to import a text
file containing a hex dump
into a new temporary capture.
It is discussed in more detail
in Section 5.5, “Import hex
dump”.
Close
Ctrl+W
This menu item closes the
current capture. If you haven’t
saved the capture, you will be
asked to do so first (this can
be disabled by a preference
setting).
Save
Ctrl+S
This menu item saves the
current capture. If you have not
set a default capture file name
(perhaps with the -w <capfile>
option), Wireshark pops up the
Save Capture File As dialog
box (which is discussed further
in Section 5.3.1, “The “Save
Capture File As” dialog box”).
If you have already saved the
current capture, this menu item
will be greyed out.
17
User Interface
Menu Item
Accelerator
Description
You cannot save a live capture
while the capture is in progress.
You must stop the capture in
order to save.
Save As…
Shift+Ctrl+S
This menu item allows you to
save the current capture file
to whatever file you would
like. It pops up the Save
Capture File As dialog box
(which is discussed further
in Section 5.3.1, “The “Save
Capture File As” dialog box”).
File Set → List Files
This menu item allows you to
show a list of files in a file set.
It pops up the Wireshark List
File Set dialog box (which is
discussed further in Section 5.6,
“File Sets”).
File Set → Next File
If the currently loaded file is
part of a file set, jump to the
next file in the set. If it isn’t part
of a file set or just the last file in
that set, this item is greyed out.
File Set → Previous File
If the currently loaded file is
part of a file set, jump to the
previous file in the set. If it
isn’t part of a file set or just the
first file in that set, this item is
greyed out.
Export Specified Packets…
This menu item allows you
to export all (or some) of the
packets in the capture file to
file. It pops up the Wireshark
Export dialog box (which is
discussed further in Section 5.7,
“Exporting data”).
Export Packet Dissections…
Ctrl+H
These menu items allow you
to export the currently selected
bytes in the packet bytes pane
to a text file file in a number
of formats including plain,
CSV, and XML. It is discussed
further in Section 5.7.7, “The
"Export selected packet bytes"
dialog box”.
Export Objects
These menu items allow you
to export captured DICOM,
HTTP, SMB, or TFTP objects
into local files. It pops up
a corresponding object list
(which is discussed further in
Section 5.7.8, “The "Export
Objects" dialog box”)
18
User Interface
Menu Item
Accelerator
Description
Print…
Ctrl+P
This menu item allows you
to print all (or some) of the
packets in the capture file. It
pops up the Wireshark Print
dialog box (which is discussed
further in Section 5.8, “Printing
packets”).
Quit
Ctrl+Q
This menu item allows you to
quit from Wireshark. Wireshark
will ask to save your capture
file if you haven’t previously
saved it (this can be disabled by
a preference setting).
3.6. The “Edit” menu
The Wireshark Edit menu contains the fields shown in Table 3.3, “Edit menu items”.
Figure 3.4. The “Edit” Menu
Table 3.3. Edit menu items
Menu Item
Accelerator
Copy
Description
These menu items will copy
the packet list, packet detail,
or properties of the currently
selected packet to the clipboard.
Find Packet…
Ctrl+F
This menu item brings up a
toolbar that allows you to find
a packet by many criteria.
There is further information on
finding packets in Section 6.8,
“Finding packets”.
Find Next
Ctrl+N
This menu item tries to find
the next packet matching the
settings from “Find Packet…”.
Find Previous
Ctrl+B
This menu item tries to find the
previous packet matching the
settings from “Find Packet…”.
Mark/Unmark Packet
Ctrl+M
This menu item marks the
currently selected packet.
See Section 6.10, “Marking
packets” for details.
Mark All Displayed Packets
Shift+Ctrl+M
This menu item marks all
displayed packets.
Unmark All Displayed Packets
Ctrl+Alt+M
This menu item unmarks all
displayed packets.
Next Mark
Shift+Alt+N
Find the next marked packet.
Previous Mark
Shift+Alt+B
Find the previous marked
packet.
19
User Interface
Menu Item
Accelerator
Description
Ignore/Unignore Packet
Ctrl+D
This menu item marks the
currently selected packet as
ignored. See Section 6.11,
“Ignoring packets” for details.
Ignore All Displayed
Shift+Ctrl+D
This menu item marks all
displayed packets as ignored.
Unignore All Displayed
Ctrl+Alt+D
This menu item unmarks all
ignored packets.
Set/Unset Time Reference
Ctrl+T
This menu item set a time
reference on the currently
selected packet. See
Section 6.12.1, “Packet
time referencing” for more
information about the time
referenced packets.
Unset All Time References
Ctrl+Alt+T
This menu item removes all
time references on the packets.
Next Time Reference
Ctrl+Alt+N
This menu item tries to find the
next time referenced packet.
Previous Time Reference
Ctrl+Alt+B
This menu item tries to find
the previous time referenced
packet.
Time Shift
Ctrl+Shift+T
This will show the Time Shift
dialog, which allows you to
adjust the timestamps of some
or all packets.
Packet Comment…
This will let you add a comment
to a single packet. Note that
the ability to save packet
comments depends on your file
format. E.g. pcapng supports
comments, pcap does not.
Capture Comment…
This will let you add a
capture comment. Note that
the ability to save capture
comments depends on your file
format. E.g. pcapng supports
comments, pcap does not.
Configuration Profiles…
Shift+Ctrl+A
Preferences…
Shift+Ctrl+P or Cmd+ (OS X) This menu item brings up
a dialog box that allows
you to set preferences for
many parameters that control
Wireshark. You can also save
your preferences so Wireshark
will use them the next time you
20
This menu item brings up
a dialog box for handling
configuration profiles.
More detail is provided in
Section 10.6, “Configuration
Profiles”.
User Interface
Menu Item
Accelerator
Description
start it. More detail is provided
in Section 10.5, “Preferences”.
3.7. The “View” menu
The Wireshark View menu contains the fields shown in Table 3.4, “View menu items”.
Figure 3.5. The “View” Menu
Table 3.4. View menu items
Menu Item
Accelerator
Description
Main Toolbar
This menu item hides or
shows the main toolbar, see
Section 3.16, “The “Main”
toolbar”.
Filter Toolbar
This menu item hides or
shows the filter toolbar, see
Section 3.17, “The “Filter”
toolbar”.
Wireless Toolbar
This menu item hides or shows
the wireless toolbar. May not be
present on some platforms.
Statusbar
This menu item hides or shows
the statusbar, see Section 3.21,
“The Statusbar”.
Packet List
This menu item hides or
shows the packet list pane, see
Section 3.18, “The “Packet
List” pane”.
Packet Details
This menu item hides or shows
the packet details pane, see
Section 3.19, “The “Packet
Details” pane”.
Packet Bytes
This menu item hides or shows
the packet bytes pane, see
Section 3.20, “The “Packet
Bytes” pane”.
Time Display Format → Date
and Time of Day: 1970-01-01
01:02:03.123456
Selecting this tells Wireshark
to display the time stamps in
date and time of day format,
see Section 6.12, “Time display
formats and time references”.
The fields "Time of Day",
"Date and Time of Day",
"Seconds Since Beginning
of Capture", "Seconds Since
Previous Captured Packet"
and "Seconds Since Previous
Displayed Packet" are mutually
exclusive.
21
User Interface
Menu Item
Accelerator
Description
Time Display Format → Time
of Day: 01:02:03.123456
Selecting this tells Wireshark
to display time stamps in time
of day format, see Section 6.12,
“Time display formats and time
references”.
Time Display Format
Selecting this tells Wireshark to
display time stamps in seconds
since 1970-01-01 00:00:00, see
Section 6.12, “Time display
formats and time references”.
→ Seconds Since
Epoch (1970-01-01):
1234567890.123456
Time Display Format →
Seconds Since Beginning of
Capture: 123.123456
Selecting this tells Wireshark to
display time stamps in seconds
since beginning of capture
format, see Section 6.12,
“Time display formats and time
references”.
Time Display Format →
Seconds Since Previous
Captured Packet: 1.123456
Selecting this tells Wireshark
to display time stamps in
seconds since previous captured
packet format, see Section 6.12,
“Time display formats and time
references”.
Time Display Format →
Seconds Since Previous
Displayed Packet: 1.123456
Selecting this tells Wireshark to
display time stamps in seconds
since previous displayed packet
format, see Section 6.12,
“Time display formats and time
references”.
Time Display Format →
Automatic (File Format
Precision)
Selecting this tells Wireshark
to display time stamps with
the precision given by the
capture file format used, see
Section 6.12, “Time display
formats and time references”.
The fields "Automatic",
"Seconds" and "…seconds" are
mutually exclusive.
Time Display Format →
Seconds: 0
Selecting this tells Wireshark
to display time stamps with a
precision of one second, see
Section 6.12, “Time display
formats and time references”.
Time Display Format → …
seconds: 0….
Selecting this tells Wireshark
to display time stamps with
a precision of one second,
decisecond, centisecond,
millisecond, microsecond or
nanosecond, see Section 6.12,
“Time display formats and time
references”.
22
User Interface
Menu Item
Accelerator
Description
Time Display Format →
Display Seconds with hours and
minutes
Selecting this tells Wireshark to
display time stamps in seconds,
with hours and minutes.
Name Resolution → Resolve
Name
This item allows you to trigger
a name resolve of the current
packet only, see Section 7.7,
“Name Resolution”.
Name Resolution → Enable for
MAC Layer
This item allows you to control
whether or not Wireshark
translates MAC addresses into
names, see Section 7.7, “Name
Resolution”.
Name Resolution → Enable for
Network Layer
This item allows you to control
whether or not Wireshark
translates network addresses
into names, see Section 7.7,
“Name Resolution”.
Name Resolution → Enable for
Transport Layer
This item allows you to control
whether or not Wireshark
translates transport addresses
into names, see Section 7.7,
“Name Resolution”.
Colorize Packet List
This item allows you to control
whether or not Wireshark
should colorize the packet list.
Enabling colorization will
slow down the display of
new packets while capturing /
loading capture files.
Auto Scroll in Live Capture
This item allows you to specify
that Wireshark should scroll the
packet list pane as new packets
come in, so you are always
looking at the last packet. If you
do not specify this, Wireshark
simply adds new packets onto
the end of the list, but does not
scroll the packet list pane.
Zoom In
Ctrl++
Zoom into the packet data
(increase the font size).
Zoom Out
Ctrl+-
Zoom out of the packet data
(decrease the font size).
Normal Size
Ctrl+=
Set zoom level back to 100%
(set font size back to normal).
Resize All Columns
Shift+Ctrl+R
Resize all column widths so the
content will fit into it.
Resizing may take a significant
amount of time, especially if a
large capture file is loaded.
23
User Interface
Menu Item
Accelerator
Displayed Columns
Description
This menu items folds out with
a list of all configured columns.
These columns can now be
shown or hidden in the packet
list.
Expand Subtrees
Shift+→
This menu item expands the
currently selected subtree in the
packet details tree.
Collapse Subtrees
Shift+←
This menu item collapses the
currently selected subtree in the
packet details tree.
Expand All
Ctrl+→
Wireshark keeps a list of all
the protocol subtrees that are
expanded, and uses it to ensure
that the correct subtrees are
expanded when you display a
packet. This menu item expands
all subtrees in all packets in the
capture.
Collapse All
Ctrl+←
This menu item collapses the
tree view of all packets in the
capture list.
Colorize Conversation
This menu item brings up a
submenu that allows you to
color packets in the packet list
pane based on the addresses
of the currently selected
packet. This makes it easy to
distinguish packets belonging
to different conversations.
Section 10.3, “Packet
colorization”.
Colorize Conversation → Color
1-10
These menu items enable one of
the ten temporary color filters
based on the currently selected
conversation.
Colorize Conversation → Reset
coloring
This menu item clears all
temporary coloring rules.
Colorize Conversation → New
Coloring Rule…
This menu item opens a
dialog window in which a new
permanent coloring rule can be
created based on the currently
selected conversation.
Coloring Rules…
This menu item brings up a
dialog box that allows you to
color packets in the packet
list pane according to filter
expressions you choose. It
can be very useful for spotting
certain types of packets,
see Section 10.3, “Packet
colorization”.
24
User Interface
Menu Item
Accelerator
Show Packet in New Window
Reload
Description
This menu item brings up the
selected packet in a separate
window. The separate window
shows only the tree view and
byte view panes.
Ctrl+R
This menu item allows you to
reload the current capture file.
3.8. The “Go” menu
The Wireshark Go menu contains the fields shown in Table 3.5, “Go menu items”.
Figure 3.6. The “Go” Menu
Table 3.5. Go menu items
Menu Item
Accelerator
Description
Back
Alt+←
Jump to the recently visited
packet in the packet history,
much like the page history in a
web browser.
Forward
Alt+→
Jump to the next visited packet
in the packet history, much
like the page history in a web
browser.
Go to Packet…
Ctrl+G
Bring up a window frame that
allows you to specify a packet
number, and then goes to that
packet. See Section 6.9, “Go to
a specific packet” for details.
Go to Corresponding Packet
Go to the corresponding
packet of the currently selected
protocol field. If the selected
field doesn’t correspond to a
packet, this item is greyed out.
Previous Packet
Ctrl+↑
Move to the previous packet
in the list. This can be used to
move to the previous packet
even if the packet list doesn’t
have keyboard focus.
Next Packet
Ctrl+↓
Move to the next packet in the
list. This can be used to move
to the previous packet even
if the packet list doesn’t have
keyboard focus.
First Packet
Ctrl+Home
Jump to the first packet of the
capture file.
Last Packet
Ctrl+End
Jump to the last packet of the
capture file.
Previous Packet In
Conversation
Ctrl+,
Move to the previous packet
in the current conversation.
25
User Interface
Menu Item
Accelerator
Description
This can be used to move to
the previous packet even if
the packet list doesn’t have
keyboard focus.
Next Packet In Conversation
Ctrl+.
Move to the next packet in the
current conversation. This can
be used to move to the previous
packet even if the packet list
doesn’t have keyboard focus.
3.9. The “Capture” menu
The Wireshark Capture menu contains the fields shown in Table 3.6, “Capture menu items”.
Figure 3.7. The “Capture” Menu
Table 3.6. Capture menu items
Menu Item
Accelerator
Description
Interfaces…
Ctrl+I
This menu item brings up a
dialog box that shows what’s
going on at the network
interfaces Wireshark knows of,
see Section 4.4, “The “Capture
Interfaces” dialog box”) .
Options…
Ctrl+K
This menu item brings up
the Capture Options dialog
box (discussed further in
Section 4.5, “The “Capture
Options” dialog box”) and
allows you to start capturing
packets.
Start
Ctrl+E
Immediately start capturing
packets with the same settings
than the last time.
Stop
Ctrl+E
This menu item stops the
currently running capture,
see Section 4.14.1, “Stop the
running capture”) .
Restart
Ctrl+R
This menu item stops the
currently running capture
and starts again with the
same options, this is just for
convenience.
Capture Filters…
This menu item brings up a
dialog box that allows you to
create and edit capture filters.
You can name filters, and you
can save them for future use.
More detail on this subject
is provided in Section 6.6,
“Defining and saving filters”
26
User Interface
3.10. The “Analyze” menu
The Wireshark Analyze menu contains the fields shown in Table 3.7, “Analyze menu items”.
Figure 3.8. The “Analyze” Menu
Table 3.7. Analyze menu items
Menu Item
Accelerator
Description
Display Filters…
This menu item brings up a
dialog box that allows you to
create and edit display filters.
You can name filters, and you
can save them for future use.
More detail on this subject
is provided in Section 6.6,
“Defining and saving filters”
Display Filter Macros…
This menu item brings up a
dialog box that allows you to
create and edit display filter
macros. You can name filter
macros, and you can save them
for future use. More detail
on this subject is provided in
Section 6.7, “Defining and
saving filter macros”
Apply as Column
This menu item adds the
selected protocol item in the
packet details pane as a column
to the packet list.
Apply as Filter → …
These menu items will change
the current display filter
and apply the changed filter
immediately. Depending on the
chosen menu item, the current
display filter string will be
replaced or appended to by the
selected protocol field in the
packet details pane.
Prepare a Filter → …
These menu items will change
the current display filter but
won’t apply the changed filter.
Depending on the chosen
menu item, the current display
filter string will be replaced
or appended to by the selected
protocol field in the packet
details pane.
Enabled Protocols…
Shift+Ctrl+E
27
This menu item allows the
user to enable/disable protocol
dissectors, see Section 10.4.1,
“The “Enabled Protocols”
dialog box”
User Interface
Menu Item
Accelerator
Description
Decode As…
This menu item allows the user
to force Wireshark to decode
certain packets as a particular
protocol, see Section 10.4.2,
“User Specified Decodes”
User Specified Decodes…
This menu item allows the
user to force Wireshark to
decode certain packets as
a particular protocol, see
Section 10.4.3, “Show User
Specified Decodes”
Follow TCP Stream
This menu item brings up a
separate window and displays
all the TCP segments captured
that are on the same TCP
connection as a selected packet,
see Section 7.2, “Following
TCP streams”
Follow UDP Stream
Same functionality as “Follow
TCP Stream” but for UDP
streams.
Follow SSL Stream
Same functionality as “Follow
TCP Stream” but for SSL
streams. See the wiki page
on SSL for instructions on
providing SSL keys.
Expert Info
Open a dialog showing some
expert information about the
captured packets. The amount
of information will depend on
the protocol and varies from
very detailed to non-existent.
XXX - add a new section about
this and link from here
Conversation Filter → …
In this menu you will find
conversation filter for various
protocols.
3.11. The “Statistics” menu
The Wireshark Statistics menu contains the fields shown in Table 3.8, “Statistics menu items”.
Figure 3.9. The “Statistics” Menu
All menu items will bring up a new window showing specific statistical information.
Table 3.8. Statistics menu items
Menu Item
Accelerator
Summary
Description
Show information about the
data captured, see Section 8.2,
“The Summary window”.
28
User Interface
Menu Item
Accelerator
Description
Protocol Hierarchy
Display a hierarchical tree
of protocol statistics, see
Section 8.3, “The "Protocol
Hierarchy" window”.
Conversations
Display a list of conversations
(traffic between two endpoints),
see Section 8.4.1, “The
“Conversations” window”.
Endpoints
Display a list of endpoints
(traffic to/from an address), see
Section 8.5.1, “The "Endpoints"
window”.
Packet Lengths…
See Section 8.10, “The protocol
specific statistics windows”
IO Graphs
Display user specified graphs
(e.g. the number of packets
in the course of time), see
Section 8.6, “The "IO Graphs"
window”.
Service Response Time
Display the time between a
request and the corresponding
response, see Section 8.7,
“Service Response Time”.
ANCP
See Section 8.10, “The protocol
specific statistics windows”
Colledtd…
See Section 8.10, “The protocol
specific statistics windows”
Compare…
See Section 8.10, “The protocol
specific statistics windows”
Flow Graph…
See Section 8.10, “The protocol
specific statistics windows”
HTTP
HTTP request/response
statistics, see Section 8.10,
“The protocol specific statistics
windows”
IP Addresses…
See Section 8.10, “The protocol
specific statistics windows”
IP Destinations…
See Section 8.10, “The protocol
specific statistics windows”
IP Protocol Types…
See Section 8.10, “The protocol
specific statistics windows”
ONC-RPC Programs
See Section 8.10, “The protocol
specific statistics windows”
Sametime
See Section 8.10, “The protocol
specific statistics windows”
TCP Stream Graph
See Section 8.10, “The protocol
specific statistics windows”
UDP Multicast Streams
See Section 8.10, “The protocol
specific statistics windows”
29
User Interface
Menu Item
Accelerator
Description
WLAN Traffic
See Section 8.9, “WLAN
Traffic Statistics”
BOOTP-DHCP
See Section 8.10, “The protocol
specific statistics windows”
3.12. The “Telephony” menu
The Wireshark Telephony menu contains the fields shown in Table 3.9, “Telephony menu items”.
Figure 3.10. The “Telephony” Menu
All menu items will bring up a new window showing specific telephony related statistical information.
Table 3.9. Telephony menu items
Menu Item
Accelerator
Description
IAX2
See Section 9.7, “The protocol
specific statistics windows”
SMPP Operations…
See Section 9.7, “The protocol
specific statistics windows”
SCTP
See Section 9.7, “The protocol
specific statistics windows”
ANSI
See Section 9.7, “The protocol
specific statistics windows”
GSM
See Section 9.7, “The protocol
specific statistics windows”
H.225…
See Section 9.7, “The protocol
specific statistics windows”
ISUP Messages…
See Section 9.7, “The protocol
specific statistics windows”
LTE
See Section 9.5, “LTE MAC
Traffic Statistics”
MTP3
See Section 9.7, “The protocol
specific statistics windows”
RTP
See Section 9.2, “RTP
Analysis”
SIP…
See Section 9.7, “The protocol
specific statistics windows”
UCP Messages…
See Section 9.7, “The protocol
specific statistics windows”
VoIP Calls…
See Section 9.4, “VoIP Calls”
WAP-WSP…
See Section 9.7, “The protocol
specific statistics windows”
3.13. The “Tools” menu
The Wireshark Tools menu contains the fields shown in Table 3.10, “Tools menu items”.
30
User Interface
Figure 3.11. The “Tools” Menu
Table 3.10. Tools menu items
Menu Item
Accelerator
Firewall ACL Rules
Description
This allows you to create
command-line ACL rules
for many different firewall
products, including Cisco IOS,
Linux Netfilter (iptables),
OpenBSD pf and Windows
Firewall (via netsh). Rules
for MAC addresses, IPv4
addresses, TCP and UDP ports,
and IPv4+port combinations are
supported.
It is assumed that the rules
will be applied to an outside
interface.
Lua
These options allow you to
work with the Lua interpreter
optionally build into Wireshark.
See the “Lua Support in
Wireshark” in the Wireshark
Developer’s Guide.
3.14. The “Internals” menu
The Wireshark Internals menu contains the fields shown in Table 3.11, “Help menu items”.
Figure 3.12. The “Internals” Menu
Table 3.11. Help menu items
Menu Item
Accelerator
Description
Dissector tables
This menu item brings up a
dialog box showing the tables
with subdissector relationships.
Supported Protocols (slow!)
This menu item brings up
a dialog box showing the
supported protocols and
protocol fields.
3.15. The “Help” menu
The Wireshark Help menu contains the fields shown in Table 3.12, “Help menu items”.
Figure 3.13. The “Help” Menu
31
User Interface
Table 3.12. Help menu items
Menu Item
Accelerator
Description
Contents
F1
This menu item brings up a
basic help system.
Manual Pages → …
This menu item starts a Web
browser showing one of the
locally installed html manual
pages.
Website
This menu item starts a
Web browser showing the
webpage from: https://
www.wireshark.org/.
FAQ’s
This menu item starts a Web
browser showing various
FAQ’s.
Downloads
This menu item starts a
Web browser showing the
downloads from: https://
www.wireshark.org/.
Wiki
This menu item starts a
Web browser showing the
front page from: https://
wiki.wireshark.org/.
Sample Captures
This menu item starts a
Web browser showing the
sample captures from: https://
wiki.wireshark.org/.
About Wireshark
This menu item brings up
an information window that
provides various detailed
information items on
Wireshark, such as how it’s
build, the plugins loaded, the
used folders, …
Note
Opening a Web browser might be unsupported in your version of Wireshark. If this is
the case the corresponding menu items will be hidden.
If calling a Web browser fails on your machine, nothing happens, or the browser starts
but no page is shown, have a look at the web browser setting in the preferences dialog.
3.16. The “Main” toolbar
The main toolbar provides quick access to frequently used items from the menu. This toolbar cannot
be customized by the user, but it can be hidden using the View menu, if the space on the screen is
needed to show even more packet data.
As in the menu, only the items useful in the current program state will be available. The others will
be greyed out (e.g. you cannot save a capture file if you haven’t loaded one).
32
User Interface
Figure 3.14. The “Main” toolbar
Table 3.13. Main toolbar items
Toolbar Icon
Toolbar Item
Corresponding Menu Description
Item
Interfaces…
Capture → Interfaces… This item brings up the
Capture Interfaces List
dialog box (discussed
further in Section 4.3,
“Start Capturing”).
Options…
Capture → Options…
This item brings up the
Capture Options dialog
box (discussed further
in Section 4.3, “Start
Capturing”) and allows
you to start capturing
packets.
Start
Capture → Start
This item starts
capturing packets with
the options form the
last time.
Stop
Capture → Stop
This item stops the
currently running
live capture process
Section 4.3, “Start
Capturing”).
Restart
Capture → Restart
This item stops the
currently running live
capture process and
restarts it again, for
convenience.
Open…
File → Open…
This item brings up
the file open dialog
box that allows you to
load a capture file for
viewing. It is discussed
in more detail in
Section 5.2.1, “The
“Open Capture File”
dialog box”.
Save As…
File → Save As…
This item allows you to
save the current capture
file to whatever file you
would like. It pops up
the Save Capture File
As dialog box (which
is discussed further in
Section 5.3.1, “The
“Save Capture File As”
dialog box”).
If you currently have a
temporary capture file,
33
User Interface
Toolbar Icon
Toolbar Item
Corresponding Menu Description
Item
the Save icon will be
shown instead.
Close
File → Close
This item closes the
current capture. If you
have not saved the
capture, you will be
asked to save it first.
Reload
View → Reload
This item allows you
to reload the current
capture file.
Print…
File → Print…
This item allows you
to print all (or some
of) the packets in the
capture file. It pops up
the Wireshark Print
dialog box (which is
discussed further in
Section 5.8, “Printing
packets”).
Find Packet…
Edit → Find Packet…
This item brings up
a dialog box that
allows you to find a
packet. There is further
information on finding
packets in Section 6.8,
“Finding packets”.
Go Back
Go → Go Back
This item jumps back
in the packet history.
Go Forward
Go → Go Forward
This item jumps
forward in the packet
history.
Go to Packet…
Go → Go to Packet…
This item brings up a
dialog box that allows
you to specify a packet
number to go to that
packet.
Go To First Packet
Go → First Packet
This item jumps to
the first packet of the
capture file.
Go To Last Packet
Go → Last Packet
This item jumps to
the last packet of the
capture file.
Colorize
View → Colorize
Colorize the packet list
(or not).
Auto Scroll in Live
Capture
View → Auto Scroll in Auto scroll packet
list while doing a live
Live Capture
capture (or not).
Zoom In
View → Zoom In
34
Zoom into the packet
data (increase the font
size).
User Interface
Toolbar Icon
Toolbar Item
Corresponding Menu Description
Item
Zoom Out
View → Zoom Out
Zoom out of the packet
data (decrease the font
size).
Normal Size
View → Normal Size
Set zoom level back to
100%.
Resize Columns
View → Resize
Columns
Resize columns, so the
content fits into them.
Capture Filters…
Capture → Capture
Filters…
This item brings up a
dialog box that allows
you to create and edit
capture filters. You
can name filters, and
you can save them
for future use. More
detail on this subject is
provided in Section 6.6,
“Defining and saving
filters”.
Display Filters…
Analyze → Display
Filters…
This item brings up a
dialog box that allows
you to create and edit
display filters. You
can name filters, and
you can save them
for future use. More
detail on this subject is
provided in Section 6.6,
“Defining and saving
filters”.
Coloring Rules…
View → Coloring
Rules…
This item brings up
a dialog box that
allows you to color
packets in the packet
list pane according
to filter expressions
you choose. It can
be very useful for
spotting certain
types of packets.
More detail on this
subject is provided in
Section 10.3, “Packet
colorization”.
Preferences…
Edit → Preferences
This item brings up a
dialog box that allows
you to set preferences
for many parameters
that control Wireshark.
You can also save
your preferences so
Wireshark will use
them the next time
you start it. More
35
User Interface
Toolbar Icon
Toolbar Item
Corresponding Menu Description
Item
detail is provided
in Section 10.5,
“Preferences”
Help
Help → Contents
This item brings up
help dialog box.
3.17. The “Filter” toolbar
The filter toolbar lets you quickly edit and apply display filters. More information on display filters
is available in Section 6.3, “Filtering packets while viewing”.
Figure 3.15. The “Filter” toolbar
Table 3.14. Filter toolbar items
Toolbar Icon
Toolbar Item
Description
Filter:
Brings up the filter construction
dialog, described in Figure 6.8,
“The “Capture Filters” and
“Display Filters” dialog boxes”.
Filter input
The area to enter or edit
a display filter string, see
Section 6.4, “Building display
filter expressions”. A syntax
check of your filter string is
done while you are typing. The
background will turn red if you
enter an incomplete or invalid
string, and will become green
when you enter a valid string.
You can click on the pull down
arrow to select a previouslyentered filter string from a list.
The entries in the pull down list
will remain available even after
a program restart.
After you’ve changed
something in this field, don’t
forget to press the Apply button
(or the Enter/Return key), to
apply this filter string to the
display.
This field is also where the
current filter in effect is
displayed.
Expression…
36
The middle button labeled "Add
Expression…" opens a dialog
box that lets you edit a display
filter from a list of protocol
fields, described in Section 6.5,
User Interface
Toolbar Icon
Toolbar Item
Description
“The “Filter Expression” dialog
box”
Clear
Reset the current display filter
and clears the edit area.
Apply
Apply the current value in the
edit area as the new display
filter.
Applying a display filter on
large capture files might take
quite a long time.
3.18. The “Packet List” pane
The packet list pane displays all the packets in the current capture file.
Figure 3.16. The “Packet List” pane
Each line in the packet list corresponds to one packet in the capture file. If you select a line in this
pane, more details will be displayed in the “Packet Details” and “Packet Bytes” panes.
While dissecting a packet, Wireshark will place information from the protocol dissectors into the
columns. As higher level protocols might overwrite information from lower levels, you will typically
see the information from the highest possible level only.
For example, let’s look at a packet containing TCP inside IP inside an Ethernet packet. The Ethernet
dissector will write its data (such as the Ethernet addresses), the IP dissector will overwrite this by its
own (such as the IP addresses), the TCP dissector will overwrite the IP information, and so on.
There are a lot of different columns available. Which columns are displayed can be selected by
preference settings, see Section 10.5, “Preferences”.
The default columns will show:
• No. The number of the packet in the capture file. This number won’t change, even if a display filter
is used.
• Time The timestamp of the packet. The presentation format of this timestamp can be changed, see
Section 6.12, “Time display formats and time references”.
• Source The address where this packet is coming from.
• Destination The address where this packet is going to.
• Protocol The protocol name in a short (perhaps abbreviated) version.
• Info Additional information about the packet content.
There is a context menu (right mouse click) available, see details in Figure 6.4, “Pop-up menu of the
“Packet List” pane”.
3.19. The “Packet Details” pane
The packet details pane shows the current packet (selected in the “Packet List” pane) in a more detailed
form.
37
User Interface
Figure 3.17. The “Packet Details” pane
This pane shows the protocols and protocol fields of the packet selected in the “Packet List” pane. The
protocols and fields of the packet are displayed using a tree, which can be expanded and collapsed.
There is a context menu (right mouse click) available, see details in Figure 6.5, “Pop-up menu of the
“Packet Details” pane”.
Some protocol fields are specially displayed.
• Generated fields Wireshark itself will generate additional protocol fields which are surrounded
by brackets. The information in these fields is derived from the known context to other packets in
the capture file. For example, Wireshark is doing a sequence/acknowledge analysis of each TCP
stream, which is displayed in the [SEQ/ACK analysis] fields of the TCP protocol.
• Links If Wireshark detected a relationship to another packet in the capture file, it will generate a
link to that packet. Links are underlined and displayed in blue. If double-clicked, Wireshark jumps
to the corresponding packet.
3.20. The “Packet Bytes” pane
The packet bytes pane shows the data of the current packet (selected in the “Packet List” pane) in a
hexdump style.
Figure 3.18. The “Packet Bytes” pane
As usual for a hexdump, the left side shows the offset in the packet data, in the middle the packet data
is shown in a hexadecimal representation and on the right the corresponding ASCII characters (or .
if not appropriate) are displayed.
Depending on the packet data, sometimes more than one page is available, e.g. when Wireshark has
reassembled some packets into a single chunk of data, see Section 7.6, “Packet Reassembly”. In this
case there are some additional tabs shown at the bottom of the pane to let you select the page you
want to see.
Figure 3.19. The “Packet Bytes” pane with tabs
Note
The additional pages might contain data picked from multiple packets.
The context menu (right mouse click) of the tab labels will show a list of all available pages. This can
be helpful if the size in the pane is too small for all the tab labels.
3.21. The Statusbar
The statusbar displays informational messages.
In general, the left side will show context related information, the middle part will show the current
number of packets, and the right side will show the selected configuration profile. Drag the handles
between the text areas to change the size.
38
User Interface
Figure 3.20. The initial Statusbar
This statusbar is shown while no capture file is loaded, e.g. when Wireshark is started.
Figure 3.21. The Statusbar with a loaded capture file
• The colorized bullet on the left shows the highest expert info level found in the currently loaded
capture file. Hovering the mouse over this icon will show a textual description of the expert info
level, and clicking the icon will bring up the Expert Infos dialog box. For a detailed description of
expert info, see Section 7.3, “Expert Information”.
• The left side shows information about the capture file, its name, its size and the elapsed time while
it was being captured.
• The middle part shows the current number of packets in the capture file. The following values
are displayed:
• Packets: the number of captured packets
• Displayed: the number of packets currently being displayed
• Marked: the number of marked packets
• Dropped: the number of dropped packets (only displayed if Wireshark was unable to capture all
packets)
• Ignored: the number of ignored packets (only displayed if packets are ignored)
• The right side shows the selected configuration profile. Clicking in this part of the statusbar will
bring up a menu with all available configuration profiles, and selecting from this list will change
the configuration profile.
Figure 3.22. The Statusbar with a configuration profile menu
For a detailed description of configuration profiles, see Section 10.6, “Configuration Profiles”.
Figure 3.23. The Statusbar with a selected protocol field
This is displayed if you have selected a protocol field from the “Packet Details” pane.
Tip
The value between the brackets (in this example arp.opcode) can be used as a display
filter string, representing the selected protocol field.
Figure 3.24. The Statusbar with a display filter message
This is displayed if you are trying to use a display filter which may have unexpected results. For a
detailed description, see Section 6.4.5, “A common mistake”.
39
Chapter 4. Capturing Live Network
Data
4.1. Introduction
Capturing live network data is one of the major features of Wireshark.
The Wireshark capture engine provides the following features:
• Capture from different kinds of network hardware such as Ethernet or 802.11.
• Stop the capture on different triggers such as the amount of captured data, elapsed time, or the
number of packets.
• Simultaneously show decoded packets while Wireshark is capturing.
• Filter packets, reducing the amount of data to be captured. See Section 4.13, “Filtering while
capturing”.
• Save packets in multiple files while doing a long term capture, optionally rotating through a fixed
number of files (a “ringbuffer”). See Section 4.11, “Capture files and file modes”.
• Simultaneously capture from multiple network interfaces.
The capture engine still lacks the following features:
• Stop capturing (or perform some other action) depending on the captured data.
4.2. Prerequisites
Setting up Wireshark to capture packets for the first time can be tricky. A comprehensive guide “How
To setup a Capture” is available at https://wiki.wireshark.org/CaptureSetup.
Here are some common pitfalls:
• You may need special privileges to start a live capture.
• You need to choose the right network interface to capture packet data from.
• You need to capture at the right place in the network to see the traffic you want to see.
If you have any problems setting up your capture environment you should have a look at the guide
mentioned above.
4.3. Start Capturing
The following methods can be used to start capturing packets with Wireshark:
• You can double-click on an interface in the main window.
• You can get an overview of the available interfaces using the “Capture Interfaces” dialog box
(Capture → Options…). See Figure 4.1, “The “Capture Interfaces” dialog box on Microsoft
Windows” or Figure 4.2, “The “Capture Interfaces” dialog box on Unix/Linux” for more
information. You can start a capture from this dialog box using the Start button.
40
Capturing Live Network Data
• You can immediately start a capture using your current settings by selecting Capture → Start or by
cliking the first toolbar button.
• If you already know the name of the capture interface you can start Wireshark from the command
line:
$ wireshark -i eth0 -k
This will start Wireshark capturing on interface eth0. More details can be found at Section 10.2, “Start
Wireshark from the command line”.
4.4. The “Capture Interfaces” dialog box
When you select Capture → Options… from the main menu Wireshark pops up the “Capture
Interfaces” dialog box as shown in Figure 4.1, “The “Capture Interfaces” dialog box on Microsoft
Windows” or Figure 4.2, “The “Capture Interfaces” dialog box on Unix/Linux”.
Both you and your OS can hide interfaces
This dialog box will only show the local interfaces Wireshark can access. It will also
hide interfaces marked as hidden in Section 10.5.1, “Interface Options”. As Wireshark
might not be able to detect all local interfaces and it cannot detect the remote interfaces
available there could be more capture interfaces available than listed.
It is possible to select more than one interface and capture from them simultaneously.
Figure 4.1. The “Capture Interfaces” dialog box on Microsoft Windows
Figure 4.2. The “Capture Interfaces” dialog box on Unix/Linux
Device (Unix/Linux only)
The interface device name.
Description
The interface description provided by the operating system, or
the user defined comment added in Section 10.5.1, “Interface
Options”.
IP
The first IP address Wireshark could find for this interface.
You can click on the address to cycle through other addresses
assigned to it, if available. If no address could be found “none”
will be displayed.
Packets
The number of packets captured from this interface, since
this dialog was opened. Will be greyed out, if no packet was
captured in the last second.
Packets/s
Number of packets captured in the last second. Will be greyed
out, if no packet was captured in the last second.
Stop
Stop a currently running capture.
Start
Start a capture on all selected interfaces immediately, using
the settings from the last capture or the default settings, if no
options have been set.
41
Capturing Live Network Data
Options
Open the Capture Options dialog with the marked interfaces
selected. See Section 4.5, “The “Capture Options” dialog box”.
Details (Microsoft Windows only)
Open a dialog with detailed information about the interface.
See Section 4.10, “The “Interface Details” dialog box”.
Help
Show this help page.
Close
Close this dialog box.
4.5. The “Capture Options” dialog box
When you select Capture → Options… (or use the corresponding item in the main toolbar), Wireshark
pops up the “Capture Options” dialog box as shown in Figure 4.3, “The “Capture Options” dialog box”.
Figure 4.3. The “Capture Options” dialog box
Tip
If you are unsure which options to choose in this dialog box just try keeping the defaults
as this should work well in many cases.
4.5.1. Capture frame
The table shows the settings for all available interfaces:
• The name of the interface and its IP addresses. If no address could be resolved from the system,
“none” will be shown.
Note
Loopback interfaces are not available on Windows platforms.
• The link-layer header type.
• The information whether promicuous mode is enabled or disabled.
• The maximum amount of data that will be captured for each packet. The default value is set to the
65535 bytes.
• The size of the kernel buffer that is reserved to keep the captured packets.
• The information whether packets will be captured in monitor mode (Unix/Linux only).
• The chosen capture filter.
By marking the checkboxes in the first column the interfaces are selected to be captured from. By
double-clicking on an interface the “Edit Interface Settings” dialog box as shown in Figure 4.4, “The
“Edit Interface Settings” dialog box” will be opened.
Capture on all interfaces
As Wireshark can capture on multiple interfaces it is possible
to choose to capture on all available interfaces.
Capture all packets in promiscuous
mode
This checkbox allows you to specify that Wireshark should put
all interfaces in promiscuous mode when capturing.
42
Capturing Live Network Data
Capture Filter
This field allows you to specify a capture filter for all interfaces
that are currently selected. Once a filter has been entered in
this field, the newly selected interfaces will inherit the filter.
Capture filters are discussed in more details in Section 4.13,
“Filtering while capturing”. It defaults to empty, or no filter.
You can also click on the Capture Filter button and Wireshark
will bring up the Capture Filters dialog box and allow you to
create and/or select a filter. Please see Section 6.6, “Defining
and saving filters”
Compile selected BPFs
This button allows you to compile the capture filter into BPF
code and pop up a window showing you the resulting pseudo
code. This can help in understanding the working of the capture
filter you created. The Compile Selected BPFs button leads you
to Figure 4.5, “The “Compile Results” dialog box”.
Tip
Linux power user tip
The execution of BPFs can be sped up on Linux by turning on BPF JIT by executing
$ echo 1 >/proc/sys/net/core/bpf_jit_enable
if it is not enabled already. To make the change persistent you can use sysfsutils.
Manage Interfaces
The Manage Interfaces button opens the Figure 4.6, “The “Add New
Interfaces” dialog box” where pipes can be defined, local interfaces
scanned or hidden, or remote interfaces added (Windows only).
4.5.2. Capture File(s) frame
An explanation about capture file usage can be found in Section 4.11, “Capture files and file modes”.
File
This field allows you to specify the file name that will be used
for the capture file. This field is left blank by default. If the field
is left blank, the capture data will be stored in a temporary file.
See Section 4.11, “Capture files and file modes” for details.
You can also click on the button to the right of this field to
browse through the filesystem.
Use multiple files
Instead of using a single file Wireshark will automatically
switch to a new one if a specific trigger condition is reached.
Use pcap-ng format
This checkbox allows you to specify that Wireshark saves
the captured packets in pcap-ng format. This next generation
capture file format is currently in development. If more than
one interface is chosen for capturing, this checkbox is set by
default. See https://wiki.wireshark.org/Development/PcapNg
for more details on pcap-ng.
Next file every n megabyte(s)
Multiple files only. Switch to the next file after the given
number of byte(s)/kilobyte(s)/megabyte(s)/gigabyte(s) have
been captured.
Next file every n minute(s)
Multiple files only: Switch to the next file after the given
number of second(s)/minutes(s)/hours(s)/days(s) have elapsed.
43
Capturing Live Network Data
Ring buffer with n files
Multiple files only: Form a ring buffer of the capture files with
the given number of files.
Stop capture after n file(s)
Multiple files only: Stop capturing after switching to the next
file the given number of times.
4.5.3. Stop Capture… frame
… after n packet(s)
Stop capturing after the given number of packets have been
captured.
… after n megabytes(s)
Stop capturing after the given number of byte(s)/kilobyte(s)/
megabyte(s)/gigabyte(s) have been captured. This option is
greyed out if “Use multiple files” is selected.
… after n minute(s)
Stop capturing after the given number of second(s)/minutes(s)/
hours(s)/days(s) have elapsed.
4.5.4. Display Options frame
Update list of packets in real time
This option allows you to specify that Wireshark should update
the packet list pane in real time. If you do not specify this,
Wireshark does not display any packets until you stop the
capture. When you check this, Wireshark captures in a separate
process and feeds the captures to the display process.
Automatic scrolling in live capture
This option allows you to specify that Wireshark should scroll
the packet list pane as new packets come in, so you are always
looking at the last packet. If you do not specify this Wireshark
simply adds new packets onto the end of the list but does not
scroll the packet list pane. This option is greyed out if “Update
list of packets in real time” is disabled.
Hide capture info dialog
If this option is checked, the capture info dialog described in
Section 4.14, “While a Capture is running …” will be hidden.
4.5.5. Name Resolution frame
Enable MAC name resolution
This option allows you to control whether or not Wireshark
translates MAC addresses into names. See Section 7.7, “Name
Resolution”.
Enable network name resolution
This option allows you to control whether or not Wireshark
translates network addresses into names. See Section 7.7,
“Name Resolution”.
Enable transport name resolution
This option allows you to control whether or not Wireshark
translates transport addresses into protocols. See Section 7.7,
“Name Resolution”.
4.5.6. Buttons
Once you have set the values you desire and have selected the options you need, simply click on Start
to commence the capture or Cancel to cancel the capture.
If you start a capture, Wireshark allows you to stop capturing when you have enough packets captured,
for details see Section 4.14, “While a Capture is running …”.
44
Capturing Live Network Data
4.6. The “Edit Interface Settings” dialog box
If you double-click on an interface in Figure 4.3, “The “Capture Options” dialog box” the following
dialog box pops up.
Figure 4.4. The “Edit Interface Settings” dialog box
You can set the following fields in this dialog box:
IP address
The IP address(es) of the selected interface. If no address could
be resolved from the system “none” will be shown.
Link-layer header type
Unless you are in the rare situation that requires this keep the
default setting. For a detailed description. See Section 4.12,
“Link-layer header type”
Wireless settings (Windows only)
Here you can set the settings for wireless capture using the
AirPCap adapter. For a detailed description see the AirPCap
Users Guide.
Remote settings (Windows only)
Here you can set the settings for remote capture. For a detailed
description see Section 4.9, “The “Remote Capture Interfaces”
dialog box”
Capture packets in promiscuous
mode
This checkbox allows you to specify that Wireshark should
put the interface in promiscuous mode when capturing. If you
do not specify this Wireshark will only capture the packets
going to or from your computer (not all packets on your LAN
segment).
Note
If some other process has put the interface in promiscuous mode you may be capturing
in promiscuous mode even if you turn off this option.
Even in promiscuous mode you still won’t necessarily see all packets on your LAN
segment. See the Wireshark FAQ for more information.
Limit each packet to n bytes
This field allows you to specify the maximum amount of data
that will be captured for each packet, and is sometimes referred
to as the snaplen. If disabled the value is set to the maximum
65535 which will be sufficient for most protocols. Some rules
of thumb:
• If you are unsure just keep the default value.
• If you don’t need or don’t want all of the data in a packet
- for example, if you only need the link-layer, IP, and TCP
headers - you might want to choose a small snapshot length,
as less CPU time is required for copying packets, less buffer
space is required for packets, and thus perhaps fewer packets
will be dropped if traffic is very heavy.
• If you don’t capture all of the data in a packet you might find
that the packet data you want is in the part that’s dropped
or that reassembly isn’t possible as the data required for
reassembly is missing.
45
Capturing Live Network Data
Buffer size: n megabyte(s)
Enter the buffer size to be used while capturing. This is the
size of the kernel buffer which will keep the captured packets,
until they are written to disk. If you encounter packet drops, try
increasing this value.
Capture packets in monitor mode
(Unix/Linux only)
This checkbox allows you to setup the Wireless interface to
capture all traffic it can receive, not just the traffic on the BSS
to which it is associated, which can happen even when you
set promiscuous mode. Also it might be necessary to turn this
option on in order to see IEEE 802.11 headers and/or radio
information from the captured frames.
Note
In monitor mode the adapter might disassociate itself from the network it was associated
to.
Capture Filter
This field allows you to specify a capture filter. Capture filters are discussed
in more details in Section 4.13, “Filtering while capturing”. It defaults to
empty, or no filter.
You can also click on the Capture Filter button and Wireshark will bring
up the “Capture Filters” dialog box and allow you to create and/or select a
filter. Please see Section 6.6, “Defining and saving filters”
Compile BPF
This button allows you to compile the capture filter into BPF code and
pop up a window showing you the resulting pseudo code. This can help in
understanding the working of the capture filter you created.
4.7. The “Compile Results” dialog box
This figure shows the compile results of the selected interfaces.
Figure 4.5. The “Compile Results” dialog box
In the left window the interface names are listed. The results of an individual interface are shown in
the right window when it is selected.
4.8. The “Add New Interfaces” dialog box
As a central point to manage interfaces this dialog box consists of three tabs to add or remove
interfaces.
Figure 4.6. The “Add New Interfaces” dialog box
4.8.1. Add or remove pipes
Figure 4.7. The “Add New Interfaces - Pipes” dialog box
To successfully add a pipe, this pipe must have already been created. Click the New button and type
the name of the pipe including its path. Alternatively, the Browse button can be used to locate the
46
Capturing Live Network Data
pipe. With the Save button the pipe is added to the list of available interfaces. Afterwards, other pipes
can be added.
To remove a pipe from the list of interfaces it first has to be selected. Then click the Delete button.
4.8.2. Add or hide local interfaces
Figure 4.8. The “Add New Interfaces - Local Interfaces” dialog box
The tab “Local Interfaces” contains a list of available local interfaces, including the hidden ones, which
are not shown in the other lists.
If a new local interface is added, for example, a wireless interface has been activated, it is not
automatically added to the list to prevent the constant scanning for a change in the list of available
interfaces. To renew the list a rescan can be done.
One way to hide an interface is to change the preferences. If the “Hide” checkbox is activated and the
Apply button clicked, the interface will not be seen in the lists of the “Capture Interfaces” dialog box
any more. The changes are also saved in the preferences file.
4.8.3. Add or hide remote interfaces
Figure 4.9. The “Add New Interfaces - Remote Interfaces” dialog box
In this tab interfaces on remote hosts can be added. One or more of these interfaces can be hidden. In
contrast to the local interfaces they are not saved in the preferences file.
To remove a host including all its interfaces from the list, it has to be selected. Then click the Delete
button.
For a detailed description see Section 4.9, “The “Remote Capture Interfaces” dialog box”
4.9. The “Remote Capture Interfaces” dialog
box
Besides doing capture on local interfaces Wireshark is capable of reaching out across the network to
a so called capture daemon or service processes to receive captured data from.
Microsoft Windows only
This dialog and capability is only available on Microsoft Windows. On Linux/Unix you
can achieve the same effect (securely) through an SSH tunnel.
The Remote Packet Capture Protocol service must first be running on the target platform before
Wireshark can connect to it. The easiest way is to install WinPcap from https://www.winpcap.org/
install/ on the target. Once installation is completed go to the Services control panel, find the Remote
Packet Capture Protocol service and start it.
Note
Make sure you have outside access to port 2002 on the target platform. This is the port
where the Remote Packet Capture Protocol service can be reached by default.
47
Capturing Live Network Data
To access the Remote Capture Interfaces dialog use the “Add New Interfaces - Remote” dialog. See
Figure 4.9, “The “Add New Interfaces - Remote Interfaces” dialog box” and select Add.
4.9.1. Remote Capture Interfaces
Figure 4.10. The “Remote Capture Interfaces” dialog box
You have to set the following parameters in this dialog:
Host
Enter the IP address or host name of the target platform where
the Remote Packet Capture Protocol service is listening. The
drop down list contains the hosts that have previously been
successfully contacted. The list can be emptied by choosing
“Clear list” from the drop down list.
Port
Set the port number where the Remote Packet Capture Protocol
service is listening on. Leave open to use the default port
(2002).
Null authentication
Select this if you don’t need authentication to take place for
a remote capture to be started. This depends on the target
platform. Configuring the target platform like this makes it
insecure.
Password authentication
This is the normal way of connecting to a target platform. Set
the credentials needed to connect to the Remote Packet Capture
Protocol service.
4.9.2. Remote Capture Settings
The remote capture can be further fine tuned to match your situation. The Remote Settings button in
Figure 4.4, “The “Edit Interface Settings” dialog box” gives you this option. It pops up the dialog
shown in Figure 4.11, “The “Remote Capture Settings” dialog box”.
Figure 4.11. The “Remote Capture Settings” dialog box
You can set the following parameters in this dialog:
Do not capture own RPCAP traffic
This option sets a capture filter so that the traffic flowing back
from the Remote Packet Capture Protocol service to Wireshark
isn’t captured as well and also send back. The recursion in this
saturates the link with duplicate traffic.
You only should switch this off when capturing on an interface
other than the interface connecting back to Wireshark.
Use UDP for data transfer
Remote capture control and data flows over a TCP connection.
This option allows you to choose an UDP stream for data
transfer.
Sampling option None
This option instructs the Remote Packet Capture Protocol
service to send back all captured packets which have passed the
capture filter. This is usually not a problem on a remote capture
session with sufficient bandwidth.
48
Capturing Live Network Data
Sampling option 1 of x packets
This option limits the Remote Packet Capture Protocol service
to send only a sub sampling of the captured data, in terms of
number of packets. This allows capture over a narrow band
remote capture session of a higher bandwidth interface.
Sampling option 1 every x
milliseconds
This option limits the Remote Packet Capture Protocol service
to send only a sub sampling of the captured data in terms of
time. This allows capture over a narrow band capture session
of a higher bandwidth interface.
4.10. The “Interface Details” dialog box
When you select Details from the Capture Interface menu, Wireshark pops up the “Interface Details”
dialog box as shown in Figure 4.12, “The “Interface Details” dialog box”. This dialog shows various
characteristics and statistics for the selected interface.
Microsoft Windows only
This dialog is only available on Microsoft Windows
Figure 4.12. The “Interface Details” dialog box
4.11. Capture files and file modes
While capturing the underlying libpcap capturing engine will grab the packets from the network card
and keep the packet data in a (relatively) small kernel buffer. This data is read by Wireshark and saved
into the capture file(s) the user specified.
Different modes of operation are available when saving this packet data to the capture file(s).
Tip
Working with large files (several hundred MB) can be quite slow. If you plan to do a
long term capture or capturing from a high traffic network, think about using one of the
“Multiple files” options. This will spread the captured packets over several smaller files
which can be much more pleasant to work with.
Using Multiple files may cut context related information. Wireshark keeps context information of the
loaded packet data, so it can report context related problems (like a stream error) and keeps information
about context related protocols (e.g. where data is exchanged at the establishing phase and only referred
to in later packets). As it keeps this information only for the loaded file, using one of the multiple file
modes may cut these contexts. If the establishing phase is saved in one file and the things you would
like to see is in another, you might not see some of the valuable context related information.
Information about the folders used for capture files can be found in Appendix B, Files and Folders.
Table 4.1. Capture file mode selected by capture options
“File” option
“Use multiple
files” option
“Ring buffer with Mode
n files” option
Resulting
filename(s) used
-
-
-
Single temporary
file
wiresharkXXXXXX
(where XXXXXX
is a unique
number)
foo.cap
-
-
Single named file
foo.cap
49
Capturing Live Network Data
“File” option
“Use multiple
files” option
“Ring buffer with Mode
n files” option
Resulting
filename(s) used
foo.cap
x
-
Multiple files,
continuous
foo_00001_20100205110102.cap,
foo_00002_20100205110318.cap,
…
foo.cap
x
x
Multiple files, ring foo_00001_20100205110102.cap,
buffer
foo_00002_20100205110318.cap,
…
Single temporary file
A temporary file will be created and used (this is the default).
After capturing is stopped this file can be saved later under a
user specified name.
Single named file
A single capture file will be used. If you want to place the new
capture file in a specific folder choose this mode.
Multiple files, continuous
Like the “Single named file” mode, but a new file is created and
used after reaching one of the multiple file switch conditions
(one of the “Next file every …” values).
Multiple files, ring buffer
Much like “Multiple files continuous”, reaching one of the
multiple files switch conditions (one of the “Next file every
…” values) will switch to the next file. This will be a newly
created file if value of “Ring buffer with n files” is not reached,
otherwise it will replace the oldest of the formerly used files
(thus forming a “ring”).
This mode will limit the maximum disk usage, even for an
unlimited amount of capture input data, only keeping the latest
captured data.
4.12. Link-layer header type
In most cases you won’t have to modify link-layer header type. Some exceaptions are as follows:
If you are capturing on an Ethernet device you might be offered a choice of “Ethernet” or “DOCSIS”.
If you are capturing traffic from a Cisco Cable Modem Termination System that is putting DOCSIS
traffic onto the Ethernet to be captured, select “DOCSIS”, otherwise select “Ethernet”.
If you are capturing on an 802.11 device on some versions of BSD you might be offered a choice of
“Ethernet” or “802.11”. “Ethernet” will cause the captured packets to have fake (“cooked”) Ethernet
headers. “802.11” will cause them to have full IEEE 802.11 headers. Unless the capture needs to be
read by an application that doesn’t support 802.11 headers you should select “802.11”.
If you are capturing on an Endace DAG card connected to a synchronous serial line you might be
offered a choice of “PPP over serial” or “Cisco HDLC”. If the protocol on the serial line is PPP, select
“PPP over serial” and if the protocol on the serial line is Cisco HDLC, select “Cisco HDLC”.
If you are capturing on an Endace DAG card connected to an ATM network you might be offered a
choice of “RFC 1483 IP-over-ATM” or “Sun raw ATM”. If the only traffic being captured is RFC
1483 LLC-encapsulated IP, or if the capture needs to be read by an application that doesn’t support
SunATM headers, select “RFC 1483 IP-over-ATM”, otherwise select “Sun raw ATM”.
4.13. Filtering while capturing
Wireshark uses the libpcap filter language for capture filters. A brief overview of the syntax follows.
Complete documentation can be found in the pcap-filter man page. You can find a lot of Capture Filter
examples at https://wiki.wireshark.org/CaptureFilters.
50
Capturing Live Network Data
You enter the capture filter into the “Filter” field of the Wireshark “Capture Options” dialog box, as
shown in Figure 4.3, “The “Capture Options” dialog box”.
A capture filter takes the form of a series of primitive expressions connected by conjunctions (and/
or) and optionally preceded by not:
[not] primitive [and|or [not] primitive ...]
An example is shown in Example 4.1, “A capture filter for telnet that captures traffic to and from a
particular host”.
Example 4.1. A capture filter for telnet that captures traffic to and from a
particular host
A capture filter for telnet that captures traffic to and from a particular host
tcp port 23 and host 10.0.0.5
This example captures telnet traffic to and from the host 10.0.0.5, and shows how to use two primitives
and the and conjunction. Another example is shown in Example 4.2, “Capturing all telnet traffic not
from 10.0.0.5”, and shows how to capture all telnet traffic except that from 10.0.0.5.
Example 4.2. Capturing all telnet traffic not from 10.0.0.5
Capturing all telnet traffic not from 10.0.0.5
tcp port 23 and not src host 10.0.0.5
A primitive is simply one of the
following: [src|dst] host <host>
This primitive allows you to filter on a host IP address or
name. You can optionally precede the primitive with the
keyword src|dst to specify that you are only interested in
source or destination addresses. If these are not present, packets
where the specified address appears as either the source or the
destination address will be selected.
ether [src|dst] host <ehost>
This primitive allows you to filter on Ethernet host addresses.
You can optionally include the keyword src|dst between the
keywords ether and host to specify that you are only interested
in source or destination addresses. If these are not present,
packets where the specified address appears in either the source
or destination address will be selected.
gateway host <host>
This primitive allows you to filter on packets that used host as a
gateway. That is, where the Ethernet source or destination was
host but neither the source nor destination IP address was host.
[src|dst] net <net> [{mask
<mask>}|{len <len>}]
This primitive allows you to filter on network numbers. You
can optionally precede this primitive with the keyword src|
dst to specify that you are only interested in a source or
destination network. If neither of these are present, packets will
be selected that have the specified network in either the source
or destination address. In addition, you can specify either the
netmask or the CIDR prefix for the network if they are different
from your own.
[tcp|udp] [src|dst] port <port>
This primitive allows you to filter on TCP and UDP port
numbers. You can optionally precede this primitive with the
keywords src|dst and tcp|udp which allow you to specify that
you are only interested in source or destination ports and
TCP or UDP packets respectively. The keywords tcp|udp must
appear before src|dst.
51
Capturing Live Network Data
If these are not specified, packets will be selected for both
the TCP and UDP protocols and when the specified address
appears in either the source or destination port field.
less|greater <length>
This primitive allows you to filter on packets whose length was
less than or equal to the specified length, or greater than or equal
to the specified length, respectively.
ip|ether proto <protocol>
This primitive allows you to filter on the specified protocol at
either the Ethernet layer or the IP layer.
ether|ip broadcast|multicast
This primitive allows you to filter on either Ethernet or IP
broadcasts or multicasts.
<expr> relop <expr>
This primitive allows you to create complex filter expressions
that select bytes or ranges of bytes in packets. Please see the
pcap-filter man page at http://www.tcpdump.org/manpages/
pcap-filter.7.html for more details.
4.13.1. Automatic Remote Traffic Filtering
If Wireshark is running remotely (using e.g. SSH, an exported X11 window, a terminal server, …), the
remote content has to be transported over the network, adding a lot of (usually unimportant) packets
to the actually interesting traffic.
To avoid this, Wireshark tries to figure out if it’s remotely connected (by looking at some
specific environment variables) and automatically creates a capture filter that matches aspects of the
connection.
The following environment variables are analyzed:
SSH_CONNECTION (ssh)
<remote IP> <remote port> <local IP> <local port>
SSH_CLIENT (ssh)
<remote IP> <remote port> <local port>
REMOTEHOST (tcsh, others?)
<remote name>
DISPLAY (x11)
[remote name]:<display num>
SESSIONNAME (terminal server)
<remote name>
On Windows it asks the operating system if it’s running in a Remote Desktop Services environment.
4.14. While a Capture is running …
While a capture is running, the following dialog box is shown:
Figure 4.13. The “Capture Info” dialog box
This dialog box will inform you about the number of captured packets and the time since the capture
was started. The selection of which protocols are counted cannot be changed.
Tip
This “Capture Info” dialog box can be hidden using the “Hide capture info dialog” option
in the Capture Options dialog box.
52
Capturing Live Network Data
4.14.1. Stop the running capture
A running capture session will be stopped in one of the following ways:
1. Using the button:[Stop[ button from the “Capture Info” dialog box.
Note
The “Capture Info” dialog box might be hidden if the “Hide capture info dialog” option
is used.
1. Using the Capture → Stop menu item.
2. Using the Stop toolbar button.
3. Pressing Ctrl+E.
4. The capture will be automatically stopped if one of the Stop Conditions is met, e.g. the maximum
amount of data was captured.
4.14.2. Restart a running capture
A running capture session can be restarted with the same capture options as the last time, this will
remove all packets previously captured. This can be useful, if some uninteresting packets are captured
and there’s no need to keep them.
Restart is a convenience function and equivalent to a capture stop following by an immediate capture
start. A restart can be triggered in one of the following ways:
1. Using the Capture → Restart menu item.
2. Using the Restart toolbar button.
53
Chapter 5. File Input, Output, and
Printing
5.1. Introduction
This chapter will describe input and output of capture data.
• Open capture files in various capture file formats
• Save/Export capture files in various capture file formats
• Merge capture files together
• Import text files containing hex dumps of packets
• Print packets
5.2. Open capture files
Wireshark can read in previously saved capture files. To read them, simply select the File → Open
menu or toolbar item. Wireshark will then pop up the “File Open” dialog box, which is discussed in
more detail in Section 5.2.1, “The “Open Capture File” dialog box”.
It’s convenient to use drag-and-drop
You can open a file by simply dragging it in your file manager and dropping it onto
Wireshark’s main window. However, drag-and-drop may not be available in all desktop
environments.
If you haven’t previously saved the current capture file you will be asked to do so to prevent data loss.
This warning can be disabled in the preferences.
In addition to its native file format (pcapng), Wireshark can read and write capture files from a large
number of other packet capture programs as well. See Section 5.2.2, “Input File Formats” for the list
of capture formats Wireshark understands.
5.2.1. The “Open Capture File” dialog box
The “Open Capture File” dialog box allows you to search for a capture file containing previously
captured packets for display in Wireshark. The following sections show some examples of the
Wireshark “Open File” dialog box. The appearance of this dialog depends on the system. However,
the functionality should be the same across systems.
Common dialog behaviour on all systems:
• Select files and directories.
• Click the Open or OK button to accept your selected file and open it.
• Click the Cancel button to go back to Wireshark and not load a capture file.
Wireshark extensions to the standard behaviour of these dialogs:
• View file preview information such as the filesize and the number of packets in a selected a capture
file.
54
File Input, Output, and Printing
• Specify a display filter with the Filter button and filter field. This filter will be used when opening
the new file. The text field background becomes green for a valid filter string and red for an invalid
one. Clicking on the Filter button causes Wireshark to pop up the “Filters” dialog box (which is
discussed further in Section 6.3, “Filtering packets while viewing”).
• Specify which type of name resolution is to be performed for all packets by clicking on one of the
“… name resolution” check buttons. Details about name resolution can be found in Section 7.7,
“Name Resolution”.
Save a lot of time loading huge capture files
You can change the display filter and name resolution settings later while viewing the
packets. However, loading huge capture files can take a significant amount of extra time
if these settings are changed later, so in such situations it can be a good idea to set at
least the filter in advance here.
Figure 5.1. “Open” on Microsoft Windows
This is the common Windows file open dialog - plus some Wireshark extensions.
Specific for this dialog:
• The Help button will lead you to this section of this “User’s Guide”.
Figure 5.2. “Open” - Linux and UNIX
This is the common Gimp/GNOME file open dialog plus some Wireshark extensions.
Specific for this dialog:
• The + button allows you to add a directory selected in the right-hand pane to the favorites list on
the left. These changes are persistent.
• The - button allows you to remove a selected directory from the list. Some items (such as “Desktop”)
cannot be removed from the favorites list.
• If Wireshark doesn’t recognize the selected file as a capture file it will grey out the Open button.
5.2.2. Input File Formats
The following file formats from other capture tools can be opened by Wireshark:
• pcapng. A flexible, etensible successor to the libpcap format. Wireshark 1.8 and later save files as
pcapng by default. Versions prior to 1.8 used libpcap.
• libpcap. The default format used by the libpcap packet capture library. Used by tcpdump, _Snort,
Nmap, Ntop, and many other tools.
• Oracle (previously Sun) snoop and atmsnoop
• Finisar (previously Shomiti) Surveyor captures
• Microsoft Network Monitor captures
• Novell LANalyzer captures
• AIX iptrace captures
55
File Input, Output, and Printing
• Cinco Networks NetXray captures
• Network Associates Windows-based Sniffer and Sniffer Pro captures
• Network General/Network Associates DOS-based Sniffer (compressed or uncompressed) captures
• AG
Group/WildPackets/Savvius
captures
EtherPeek/TokenPeek/AiroPeek/EtherHelp/PacketGrabber
• RADCOM’s WAN/LAN Analyzer captures
• Network Instruments Observer version 9 captures
• Lucent/Ascend router debug output
• HP-UX’s nettl
• Toshiba’s ISDN routers dump output
• ISDN4BSD i4btrace utility
• traces from the EyeSDN USB S0
• IPLog format from the Cisco Secure Intrusion Detection System
• pppd logs (pppdump format)
• the output from VMS’s TCPIPtrace/TCPtrace/UCX$TRACE utilities
• the text output from the DBS Etherwatch VMS utility
• Visual Networks' Visual UpTime traffic capture
• the output from CoSine L2 debug
• the output from Accellent’s 5Views LAN agents
• Endace Measurement Systems' ERF format captures
• Linux Bluez Bluetooth stack hcidump -w traces
• Catapult DCT2000 .out files
• Gammu generated text output from Nokia DCT3 phones in Netmonitor mode
• IBM Series (OS/400) Comm traces (ASCII & UNICODE)
• Juniper Netscreen snoop captures
• Symbian OS btsnoop captures
• Tamosoft CommView captures
• Textronix K12xx 32bit .rf5 format captures
• Textronix K12 text file format captures
• Apple PacketLogger captures
• Captures from Aethra Telecommunications' PC108 software for their test instruments
New file formats are added from time to time.
56
File Input, Output, and Printing
It may not be possible to read some formats dependent on the packet types captured. Ethernet captures
are usually supported for most file formats but it may not be possible to read other packet types such
as PPP or IEEE 802.11 from all file formats.
5.3. Saving captured packets
You can save captured packets simply by using the File → Save As… menu item. You can choose
which packets to save and which file format to be used.
Not all information will be saved in a capture file. For example, most file formats don’t record the
number of dropped packets. See Section B.1, “Capture Files” for details.
5.3.1. The “Save Capture File As” dialog box
The “Save Capture File As” dialog box allows you to save the current capture to a file. The following
sections show some examples of this dialog box. The appearance of this dialog depends on the system.
However, the functionality should be the same across systems.
Figure 5.3. “Save” on Microsoft Windows
This is the common Windows file save dialog with some additional Wireshark extensions.
Specific behavior for this dialog:
• If available, the “Help” button will lead you to this section of this "User’s Guide".
• If you don’t provide a file extension to the filename (e.g. .pcap) Wireshark will append the
standard file extension for that file format.
Figure 5.4. “Save” on Linux and UNIX
This is the common Gimp/GNOME file save dialog with additional Wireshark extensions.
Specific for this dialog:
• Clicking on the + at "Browse for other folders" will allow you to browse files and folders in your
file system.
With this dialog box, you can perform the following actions:
1. Type in the name of the file you wish to save the captured packets in, as a standard file name in
your file system.
2. Select the directory to save the file into.
3. Select the range of the packets to be saved. See Section 5.9, “The “Packet Range” frame”.
4. Specify the format of the saved capture file by clicking on the File type drop down box. You can
choose from the types described in Section 5.3.2, “Output File Formats”.
Some capture formats may not be available depending on the packet types captured.
Wireshark can convert file formats
You can convert capture files from one format to another by reading in a capture file and
writing it out using a different format.
57
File Input, Output, and Printing
1. Click the Save or OK button to accept your selected file and save to it. If Wireshark has a problem
saving the captured packets to the file you specified it will display an error dialog box. After clicking
OK on that error dialog box you can try again.
2. Click on the Cancel button to go back to Wireshark without saving any packets.
5.3.2. Output File Formats
Wireshark can save the packet data in its native file format (pcapng) and in the file formats of other
protocol analyzers so other tools can read the capture data.
Different file formats have different time stamp accuracies
Saving from the currently used file format to a different format may reduce the time
stamp accuracy; see the Section 7.4, “Time Stamps” for details.
The following file formats can be saved by Wireshark (with the known file extensions):
• pcapng (*.pcapng). A flexible, etensible successor to the libpcap format. Wireshark 1.8 and later
save files as pcapng by default. Versions prior to 1.8 used libpcap.
• libpcap, tcpdump and various other tools using tcpdump’s capture format (*.pcap,*.cap,*.dmp)
• Accellent 5Views (*.5vw)
• HP-UX’s nettl (*.TRC0,*.TRC1)
• Microsoft Network Monitor - NetMon (*.cap)
• Network Associates Sniffer - DOS (*.cap,*.enc,*.trc,*fdc,*.syc)
• Network Associates Sniffer - Windows (*.cap)
• Network Instruments Observer version 9 (*.bfr)
• Novell LANalyzer (*.tr1)
• Oracle (previously Sun) snoop (*.snoop,*.cap)
• Visual Networks Visual UpTime traffic (*.*)
New file formats are added from time to time.
Whether or not the above tools will be more helpful than Wireshark is a different question ;-)
Third party protocol analyzers may require specific file
extensions
Wireshark examines a file’s contents to determine its type. Some other protocol analyzers
only look at a filename extensions. For example, you might need to use the .cap
extension in order to open a file using Sniffer.
5.4. Merging capture files
Sometimes you need to merge several capture files into one. For example, this can be useful if you have
captured simultaneously from multiple interfaces at once (e.g. using multiple instances of Wireshark).
There are three ways to merge capture files using Wireshark:
• Use the File → Merge menu to open the “Merge” dialog. See Section 5.4.1, “The “Merge with
Capture File” dialog box”. This menu item will be disabled unless you have loaded a capture file.
58
File Input, Output, and Printing
• Use drag-and-drop to drop multiple files on the main window. Wireshark will try to merge the
packets in chronological order from the dropped files into a newly created temporary file. If you
drop only a single file it will simply replace the existing capture.
• Use the mergecap tool, a command line tool to merge capture files. This tool provides the most
options to merge capture files. See Section D.8, “mergecap: Merging multiple capture files into
one” for details.
5.4.1. The “Merge with Capture File” dialog box
This dialog box let you select a file to be merged into the currently loaded file. If your current data
has not been saved you will be asked to save it first.
Most controls of this dialog will work the same way as described in the “Open Capture File” dialog
box, see Section 5.2.1, “The “Open Capture File” dialog box”.
Specific controls of this merge dialog are:
Prepend packets to existing file
Prepend the packets from the selected file before the currently
loaded packets.
Merge packets chronologically
Merge both the packets from the selected and currently loaded
file in chronological order.
Append packets to existing file
Append the packets from the selected file after the currently
loaded packets.
Figure 5.5. “Merge” on Microsoft Windows
This is the common Windows file open dialog with additional Wireshark extensions.
Figure 5.6. “Merge” on Linux and UNIX
This is the common Gimp/GNOME file open dialog with additional Wireshark extensions.
5.5. Import hex dump
Wireshark can read in an ASCII hex dump and write the data described into a temporary libpcap
capture file. It can read hex dumps with multiple packets in them, and build a capture file of multiple
packets. It is also capable of generating dummy Ethernet, IP and UDP, TCP, or SCTP headers, in order
to build fully processable packet dumps from hexdumps of application-level data only.
Wireshark understands a hexdump of the form generated by od -Ax -tx1 -v. In other words, each
byte is individually displayed and surrounded with a space. Each line begins with an offset describing
the position in the file. The offset is a hex number (can also be octal or decimal), of more than two
hex digits. Here is a sample dump that can be imported:
000000
000008
000010
000018
000020
000028
000030
00
5a
03
ee
03
16
01
e0
a0
68
33
80
a2
01
1e
b9
00
0f
94
0a
0f
a7
12
00
19
04
00
19
05
08
00
08
00
03
03
6f
00
00
7f
00
50
80
00
46
0a
0f
10
00
11
10
00
2e
19
01
0c
01
........
........
........
........
........
........
........
There is no limit on the width or number of bytes per line. Also the text dump at the end of the line is
ignored. Byte and hex numbers can be uppercase or lowercase. Any text before the offset is ignored,
including email forwarding characters >. Any lines of text between the bytestring lines are ignored.
59
File Input, Output, and Printing
The offsets are used to track the bytes, so offsets must be correct. Any line which has only bytes
without a leading offset is ignored. An offset is recognized as being a hex number longer than two
characters. Any text after the bytes is ignored (e.g. the character dump). Any hex numbers in this text
are also ignored. An offset of zero is indicative of starting a new packet, so a single text file with
a series of hexdumps can be converted into a packet capture with multiple packets. Packets may be
preceded by a timestamp. These are interpreted according to the format given. If not the first packet is
timestamped with the current time the import takes place. Multiple packets are read in with timestamps
differing by one microsecond each. In general, short of these restrictions, Wireshark is pretty liberal
about reading in hexdumps and has been tested with a variety of mangled outputs (including being
forwarded through email multiple times, with limited line wrap etc.)
There are a couple of other special features to note. Any line where the first non-whitespace character
is # will be ignored as a comment. Any line beginning with #TEXT2PCAP is a directive and options
can be inserted after this command to be processed by Wireshark. Currently there are no directives
implemented. In the future these may be used to give more fine grained control on the dump and the
way it should be processed e.g. timestamps, encapsulation type etc. Wireshark also allows the user
to read in dumps of application-level data, by inserting dummy L2, L3 and L4 headers before each
packet. The user can elect to insert Ethernet headers, Ethernet and IP, or Ethernet, IP and UDP/TCP/
SCTP headers before each packet. This allows Wireshark or any other full-packet decoder to handle
these dumps.
5.5.1. The “Import from Hex Dump” dialog box
This dialog box lets you select a text file, containing a hex dump of packet data, to be imported and
set import parameters.
Figure 5.7. The “Import from Hex Dump” dialog
Specific controls of this import dialog are split in two sections:
Input
Determine which input file has to be imported and how it is to be interpreted.
Import
Determine how the data is to be imported.
The input parameters are as follows:
Filename / Browse
Enter the name of the text file to import. You can use Browse to browse
for a file.
Offsets
Select the radix of the offsets given in the text file to import. This is
usually hexadecimal, but decimal and octal are also supported.
Date/Time
Tick this checkbox if there are timestamps associated with the frames
in the text file to import you would like to use. Otherwise the current
time is used for timestamping the frames.
Format
This is the format specifier used to parse the timestamps in the text
file to import. It uses a simple syntax to describe the format of the
timestamps, using %H for hours, %M for minutes, %S for seconds, etc.
The straightforward HH:MM:SS format is covered by %T. For a full
definition of the syntax look for strptime(3).
The import parameters are as follows:
Encapsulation type
Here you can select which type of frames you are importing. This
all depends on from what type of medium the dump to import was
taken. It lists all types that Wireshark understands, so as to pass
the capture file contents to the right dissector.
60
File Input, Output, and Printing
Dummy header
When Ethernet encapsulation is selected you have to option to
prepend dummy headers to the frames to import. These headers
can provide artificial Ethernet, IP, UDP or TCP or SCTP headers
and SCTP data chunks. When selecting a type of dummy header
the applicable entries are enabled, others are grayed out and
default values are used.
Maximum frame length
You may not be interested in the full frames from the text file, just
the first part. Here you can define how much data from the start of
the frame you want to import. If you leave this open the maximum
is set to 65535 bytes.
Once all input and import parameters are setup click OK to start the import. If your current data wasn’t
saved before you will be asked to save it first.
When completed there will be a new capture file loaded with the frames imported from the text file.
5.6. File Sets
When using the "Multiple Files" option while doing a capture (see: Section 4.11, “Capture files and
file modes”), the capture data is spread over several capture files, called a file set.
As it can become tedious to work with a file set by hand, Wireshark provides some features to handle
these file sets in a convenient way.
How does Wireshark detect the files of a file set?
A filename in a file set uses the format Prefix_Number_DateTimeSuffix which might look
something like test_00001_20060420183910.pcap. All files of a file set share the
same prefix (e.g. “test”) and suffix (e.g. “.pcap”) and a varying middle part.
To find the files of a file set, Wireshark scans the directory where the currently loaded file
resides and checks for files matching the filename pattern (prefix and suffix) of the currently
loaded file.
This simple mechanism usually works well but has its drawbacks. If several file sets were
captured with the same prefix and suffix, Wireshark will detect them as a single file set. If files
were renamed or spread over several directories the mechanism will fail to find all files of a set.
The following features in the File → File Set submenu are available to work with file sets in a
convenient way:
• The “List Files” dialog box will list the files Wireshark has recognized as being part of the current
file set.
• Next File closes the current and opens the next file in the file set.
• Previous File closes the current and opens the previous file in the file set.
5.6.1. The “List Files” dialog box
Figure 5.8. The "List Files" dialog box
Each line contains information about a file of the file set:
• Filename the name of the file. If you click on the filename (or the radio button left to it), the current
file will be closed and the corresponding capture file will be opened.
61
File Input, Output, and Printing
• Created the creation time of the file
• Last Modified the last time the file was modified
• Size the size of the file
The last line will contain info about the currently used directory where all of the files in the file set
can be found.
The content of this dialog box is updated each time a capture file is opened/closed.
The Close button will, well, close the dialog box.
5.7. Exporting data
Wireshark provides several ways and formats to export packet data. This section describes general
ways to export data from the main Wireshark application. There are more specialized functions to
export specific data which are described elsewhere.
5.7.1. The “Export as Plain Text File” dialog box
Export packet data into a plain ASCII text file, much like the format used to print packets.
Tip
If you would like to be able to import any previously exported packets from a plain text
file it is recommended that you:
• Add the “Absolute date and time” column.
• Temporarily hide all other columns.
• Disable the Edit → Preferences → Protocols → Data “Show not dissected data
on new Packet Bytes pane” preference. More details are provided in Section 10.5,
“Preferences”
• Include the packet summary line.
• Exclude column headings.
• Exclude packet details.
• Include the packet bytes.
Figure 5.9. The “Export as Plain Text File” dialog box
• The “Export to file:” frame chooses the file to export the packet data to.
• The “Packet Range” frame is described in Section 5.9, “The “Packet Range” frame”.
• The “Packet Details” frame is described in Section 5.10, “The Packet Format frame”.
5.7.2. The “Export as PostScript File” dialog box
Figure 5.10. The "Export as PostScript File" dialog box
62
File Input, Output, and Printing
• Export to file: frame chooses the file to export the packet data to.
• The Packet Range frame is described in Section 5.9, “The “Packet Range” frame”.
• The Packet Details frame is described in Section 5.10, “The Packet Format frame”.
5.7.3. The "Export as CSV (Comma Separated Values)
File" dialog box
Export packet summary into CSV, used e.g. by spreadsheet programs to im-/export data.
• Export to file: frame chooses the file to export the packet data to.
• The Packet Range frame is described in Section 5.9, “The “Packet Range” frame”.
5.7.4. The "Export as C Arrays (packet bytes) file"
dialog box
Export packet bytes into C arrays so you can import the stream data into your own C program.
• Export to file: frame chooses the file to export the packet data to.
• The Packet Range frame is described in Section 5.9, “The “Packet Range” frame”.
5.7.5. The "Export as PSML File" dialog box
Export packet data into PSML. This is an XML based format including only the packet summary. The
PSML file specification is available at: http://www.nbee.org/doku.php?id=netpdl:psml_specification.
Figure 5.11. The "Export as PSML File" dialog box
• Export to file: frame chooses the file to export the packet data to.
• The Packet Range frame is described in Section 5.9, “The “Packet Range” frame”.
There’s no such thing as a packet details frame for PSML export, as the packet format is defined by
the PSML specification.
5.7.6. The "Export as PDML File" dialog box
Export packet data into PDML. This is an XML based format including the packet details. The PDML
file specification is available at: http://www.nbee.org/doku.php?id=netpdl:pdml_specification.
Note
The PDML specification is not officially released and Wireshark’s implementation of it
is still in an early beta state, so please expect changes in future Wireshark versions.
Figure 5.12. The "Export as PDML File" dialog box
• Export to file: frame chooses the file to export the packet data to.
• The Packet Range frame is described in Section 5.9, “The “Packet Range” frame”.
63
File Input, Output, and Printing
There’s no such thing as a packet details frame for PDML export, as the packet format is defined by
the PDML specification.
5.7.7. The "Export selected packet bytes" dialog box
Export the bytes selected in the "Packet Bytes" pane into a raw binary file.
Figure 5.13. The "Export Selected Packet Bytes" dialog box
• Name: the filename to export the packet data to.
• The Save in folder: field lets you select the folder to save to (from some predefined folders).
• Browse for other folders provides a flexible way to choose a folder.
5.7.8. The "Export Objects" dialog box
This feature scans through HTTP streams in the currently open capture file or running capture and
takes reassembled objects such as HTML documents, image files, executables and anything else that
can be transferred over HTTP and lets you save them to disk. If you have a capture running, this list
is automatically updated every few seconds with any new objects seen. The saved objects can then be
opened with the proper viewer or executed in the case of executables (if it is for the same platform
you are running Wireshark on) without any further work on your part. This feature is not available
when using GTK2 versions below 2.4.
Figure 5.14. The "Export Objects" dialog box
• Packet num: The packet number in which this object was found. In some cases, there can be multiple
objects in the same packet.
• Hostname: The hostname of the server that sent the object as a response to an HTTP request.
• Content Type: The HTTP content type of this object.
• Bytes: The size of this object in bytes.
• Filename: The final part of the URI (after the last slash). This is typically a filename, but may be
a long complex looking string, which typically indicates that the file was received in response to
a HTTP POST request.
• Help: Opens this section in the user’s guide.
• Close: Closes this dialog.
• Save As: Saves the currently selected object as a filename you specify. The default filename to save
as is taken from the filename column of the objects list.
• Save All: Saves all objects in the list using the filename from the filename column. You will be
asked what directory / folder to save them in. If the filename is invalid for the operating system /
file system you are running Wireshark on, then an error will appear and that object will not be saved
(but all of the others will be).
5.8. Printing packets
To print packets, select the File → Print… menu item. When you do this Wireshark pops up the “Print”
dialog box as shown in Figure 5.15, “The “Print” dialog box”.
64
File Input, Output, and Printing
5.8.1. The “Print” dialog box
Figure 5.15. The “Print” dialog box
The following fields are available
in the Print dialog box: Printer
This field contains a pair of mutually exclusive radio buttons:
• Plain Text specifies that the packet print should be in plain
text.
• PostScript specifies that the packet print process should use
PostScript to generate a better print output on PostScript
aware printers.
• Output to file: specifies that printing be done to a file, using
the filename entered in the field or selected with the browse
button.
This field is where you enter the file to print to if you have
selected Print to a file, or you can click the button to browse
the filesystem. It is greyed out if Print to a file is not selected.
• Print command specifies that a command be used for
printing.
Note!
These Print command fields are not available
on windows platforms.
This field specifies the command to use for printing. It is
typically lpr. You would change it to specify a particular
queue if you need to print to a queue other than the default.
An example might be:
$ lpr -Pmypostscript
This field is greyed out if Output to file: is checked above.
Packet Range
Select the packets to be printed, see Section 5.9, “The “Packet
Range” frame”
Packet Format
Select the output format of the packets to be printed. You
can choose, how each packet is printed, see Figure 5.17, “The
“Packet Format” frame”
5.9. The “Packet Range” frame
The packet range frame is a part of various output related dialog boxes. It provides options to select
which packets should be processed by the output function.
Figure 5.16. The “Packet Range” frame
If the Captured button is set (default), all packets from the selected rule will be processed. If the
Displayed button is set, only the currently displayed packets are taken into account to the selected rule.
• All packets will process all packets.
65
File Input, Output, and Printing
• Selected packet only process only the selected packet.
• Marked packets only process only the marked packets.
• From first to last marked packet process the packets from the first to the last marked one.
• Specify a packet range process a user specified range of packets, e.g. specifying 5,10-15,20- will
process the packet number five, the packets from packet number ten to fifteen (inclusive) and every
packet from number twenty to the end of the capture.
5.10. The Packet Format frame
The packet format frame is a part of various output related dialog boxes. It provides options to select
which parts of a packet should be used for the output function.
Figure 5.17. The “Packet Format” frame
• Packet summary line enable the output of the summary line, just as in the “Packet List” pane.
• Packet details enable the output of the packet details tree.
• All collapsed the info from the “Packet Details” pane in “all collapsed” state.
• As displayed the info from the “Packet Details” pane in the current state.
• All expanded the info from the “Packet Details” pane in “all expanded” state.
• Packet bytes enable the output of the packet bytes, just as in the “Packet Bytes” pane.
• Each packet on a new page put each packet on a separate page (e.g. when saving/printing to a text
file, this will put a form feed character between the packets).
66
Chapter 6. Working with captured
packets
6.1. Viewing packets you have captured
Once you have captured some packets or you have opened a previously saved capture file, you can
view the packets that are displayed in the packet list pane by simply clicking on a packet in the packet
list pane, which will bring up the selected packet in the tree view and byte view panes.
You can then expand any part of the tree to view detailed information about each protocol in each
packet. Clicking on an item in the tree will highlight the corresponding bytes in the byte view. An
example with a TCP packet selected is shown in Figure 6.1, “Wireshark with a TCP packet selected
for viewing”. It also has the Acknowledgment number in the TCP header selected, which shows up
in the byte view as the selected bytes.
Figure 6.1. Wireshark with a TCP packet selected for viewing
You can also select and view packets the same way while Wireshark is capturing if you selected
“Update list of packets in real time” in the “Capture Preferences” dialog box.
In addition you can view individual packets in a separate window as shown in Figure 6.2, “Viewing a
packet in a separate window”. You can do this by double-clicking on an item in the packet list or by
selecting the packet in which you are interested in the packet list pane and selecting View → Show
Packet in New Window. This allows you to easily compare two or more packets, even across multiple
files.
Figure 6.2. Viewing a packet in a separate window
Along with double-clicking the packet list and using the main menu there are a number of other ways
to open a new packet window:
• Hold down the shift key and double-click on a frame link in the packet details.
• From Table 6.2, “The menu items of the “Packet List” pop-up menu”.
• From Table 6.3, “The menu items of the “Packet Details” pop-up menu”.
6.2. Pop-up menus
You can bring up a pop-up menu over either the “Packet List”, its column header, or “Packet Details”
pane by clicking your right mouse button at the corresponding pane.
6.2.1. Pop-up menu of the “Packet List” column
header
Figure 6.3. Pop-up menu of the “Packet List” column header
The following table gives an overview of which functions are available in this header, where to find
the corresponding function in the main menu, and a short description of each item.
67
Working with captured packets
Table 6.1. The menu items of the “Packet List” column header pop-up menu
Item
Identical to main menu’s
item:
Description
Sort Ascending
Sort the packet list in ascending
order based on this column.
Sort Descending
Sort the packet list in
descending order based on this
column.
No Sort
Remove sorting order based on
this column.
Align Left
Set left alignment of the values
in this column.
Align Center
Set center alignment of the
values in this column.
Align Right
Set right alignment of the
values in this column.
Column Preferences…
Open the Preferences dialog
box on the column tab.
Resize Column
Resize the column to fit the
values.
Rename Column Title
Allows you to change the title
of the column header.
Displayed Column
View
This menu items folds out with
a list of all configured columns.
These columns can now be
shown or hidden in the packet
list.
Hide Column
Allows you to hide the column
from the packet list.
Remove Column
Allows you to remove the
column from the packet list.
6.2.2. Pop-up menu of the “Packet List” pane
Figure 6.4. Pop-up menu of the “Packet List” pane
The following table gives an overview of which functions are available in this pane, where to find the
corresponding function in the main menu, and a short description of each item.
Table 6.2. The menu items of the “Packet List” pop-up menu
Item
Identical to main menu’s
item:
Description
Mark Packet (toggle)
Edit
Mark/unmark a packet.
Ignore Packet (toggle)
Edit
Ignore or inspect this packet
while dissecting the capture file.
Set Time Reference (toggle)
Edit
Set/reset a time reference.
Manually Resolve Address
Allows you to enter a name to
resolve for the selected address.
68
Working with captured packets
Item
Identical to main menu’s
item:
Description
Apply as Filter
Analyze
Prepare and apply a display
filter based on the currently
selected item.
Prepare a Filter
Analyze
Prepare a display filter based on
the currently selected item.
Conversation Filter
This menu item applies a
display filter with the address
information from the selected
packet. E.g. the IP menu entry
will set a filter to show the
traffic between the two IP
addresses of the current packet.
XXX - add a new section
describing this better.
Colorize Conversation
This menu item uses a
display filter with the address
information from the selected
packet to build a new colorizing
rule.
SCTP
Allows you to analyze and
prepare a filter for this SCTP
association.
Follow TCP Stream
Analyze
Allows you to view all the data
on a TCP stream between a pair
of nodes.
Follow UDP Stream
Analyze
Allows you to view all the data
on a UDP datagram stream
between a pair of nodes.
Follow SSL Stream
Analyze
Same as “Follow TCP Stream”
but for SSL. XXX - add a new
section describing this better.
Copy/ Summary (Text)
Copy the summary fields as
displayed to the clipboard, as
tab-separated text.
Copy/ Summary (CSV)
Copy the summary fields as
displayed to the clipboard, as
comma-separated text.
Copy/ As Filter
Prepare a display filter based on
the currently selected item and
copy that filter to the clipboard.
Copy/ Bytes (Offset Hex Text)
Copy the packet bytes to the
clipboard in hexdump-like
format.
Copy/ Bytes (Offset Hex)
Copy the packet bytes to the
clipboard in hexdump-like
format, but without the text
portion.
Copy/ Bytes (Printable Text
Only)
Copy the packet bytes to
the clipboard as ASCII text,
69
Working with captured packets
Item
Identical to main menu’s
item:
Description
excluding non-printable
characters.
Copy/ Bytes (Hex Stream)
Copy the packet bytes to the
clipboard as an unpunctuated
list of hex digits.
Copy/ Bytes (Binary Stream)
Copy the packet bytes to the
clipboard as raw binary. The
data is stored in the clipboard as
MIME-type “application/octetstream”.
Decode As…
Analyze
Change or apply a new relation
between two dissectors.
Print…
File
Print packets.
Show Packet in New Window
View
Display the selected packet in a
new window.
6.2.3. Pop-up menu of the “Packet Details” pane
Figure 6.5. Pop-up menu of the “Packet Details” pane
The following table gives an overview of which functions are available in this pane, where to find the
corresponding function in the main menu, and a short description of each item.
Table 6.3. The menu items of the “Packet Details” pop-up menu
Item
Identical to main menu’s
item:
Description
Expand Subtrees
View
Expand the currently selected
subtree.
Collapse Subtrees
View
Collapse the currently selected
subtree.
Expand All
View
Expand all subtrees in all
packets in the capture.
Collapse All
View
Wireshark keeps a list of all
the protocol subtrees that are
expanded, and uses it to ensure
that the correct subtrees are
expanded when you display
a packet. This menu item
collapses the tree view of all
packets in the capture list.
Apply as Column
Use the selected protocol item
to create a new column in the
packet list.
Apply as Filter
Analyze
Prepare and apply a display
filter based on the currently
selected item.
Prepare a Filter
Analyze
Prepare a display filter based on
the currently selected item.
70
Working with captured packets
Item
Identical to main menu’s
item:
Colorize with Filter
Description
This menu item uses a display
filter with the information from
the selected protocol item to
build a new colorizing rule.
Follow TCP Stream
Analyze
Allows you to view all the data
on a TCP stream between a pair
of nodes.
Follow UDP Stream
Analyze
Allows you to view all the data
on a UDP datagram stream
between a pair of nodes.
Follow SSL Stream
Analyze
Same as “Follow TCP Stream”
but for SSL. XXX - add a new
section describing this better.
Copy/ Description
Edit
Copy the displayed text of the
selected field to the system
clipboard.
Copy/ Fieldname
Edit
Copy the name of the selected
field to the system clipboard.
Copy/ Value
Edit
Copy the value of the selected
field to the system clipboard.
Copy/ As Filter
Edit
Prepare a display filter based on
the currently selected item and
copy it to the clipboard.
Copy/ Bytes (Offset Hex Text)
Copy the packet bytes to the
clipboard in hexdump-like
format; similar to the Packet
List Pane command, but copies
only the bytes relevant to the
selected part of the tree (the
bytes selected in the Packet
Bytes Pane).
Copy/ Bytes (Offset Hex)
Copy the packet bytes to the
clipboard in hexdump-like
format, but without the text
portion; similar to the Packet
List Pane command, but copies
only the bytes relevant to the
selected part of the tree (the
bytes selected in the Packet
Bytes Pane).
Copy/ Bytes (Printable Text
Only)
Copy the packet bytes to
the clipboard as ASCII text,
excluding non-printable
characters; similar to the Packet
List Pane command, but copies
only the bytes relevant to the
selected part of the tree (the
bytes selected in the Packet
Bytes Pane).
Copy/ Bytes (Hex Stream)
Copy the packet bytes to the
clipboard as an unpunctuated
71
Working with captured packets
Item
Identical to main menu’s
item:
Description
list of hex digits; similar to the
Packet List Pane command, but
copies only the bytes relevant
to the selected part of the tree
(the bytes selected in the Packet
Bytes Pane).
Copy/ Bytes (Binary Stream)
Copy the packet bytes to
the clipboard as raw binary;
similar to the Packet List Pane
command, but copies only the
bytes relevant to the selected
part of the tree (the bytes
selected in the Packet Bytes
Pane). The data is stored in
the clipboard as MIME-type
“application/octet-stream”.
Export Selected Packet Bytes… File
This menu item is the same as
the File menu item of the same
name. It allows you to export
raw packet bytes to a binary
file.
Wiki Protocol Page
Show the wiki page
corresponding to the currently
selected protocol in your web
browser.
Filter Field Reference
Show the filter field reference
web page corresponding to the
currently selected protocol in
your web browser.
Protocol Preferences…
The menu item takes you to the
properties dialog and selects
the page corresponding to the
protocol if there are properties
associated with the highlighted
field. More information on
preferences can be found in
Figure 10.7, “The preferences
dialog box”.
Decode As…
Analyze
Change or apply a new relation
between two dissectors.
Disable Protocol
Allows you to temporarily
disable a protocol dissector,
which may be blocking the
legitimate dissector.
Resolve Name
View
Causes a name resolution to
be performed for the selected
packet, but NOT every packet
in the capture.
Go to Corresponding Packet
Go
If the selected field has a
corresponding packet, go to
it. Corresponding packets will
72
Working with captured packets
Item
Identical to main menu’s
item:
Description
usually be a request/response
packet pair or such.
6.3. Filtering packets while viewing
Wireshark has two filtering languages: One used when capturing packets, and one used when
displaying packets. In this section we explore that second type of filter: Display filters. The first one
has already been dealt with in Section 4.13, “Filtering while capturing”.
Display filters allow you to concentrate on the packets you are interested in while hiding the currently
uninteresting ones. They allow you to select packets by:
• Protocol
• The presence of a field
• The values of fields
• A comparison between fields
• … and a lot more!
To select packets based on protocol type, simply type the protocol in which you are interested in
the Filter: field in the filter toolbar of the Wireshark window and press enter to initiate the filter.
Figure 6.6, “Filtering on the TCP protocol” shows an example of what happens when you type tcp
in the filter field.
Note
All protocol and field names are entered in lowercase. Also, don’t forget to press enter
after entering the filter expression.
Figure 6.6. Filtering on the TCP protocol
As you might have noticed, only packets of the TCP protocol are displayed now (e.g. packets 1-10
are hidden). The packet numbering will remain as before, so the first packet shown is now packet
number 11.
Note
When using a display filter, all packets remain in the capture file. The display filter only
changes the display of the capture file but not its content!
You can filter on any protocol that Wireshark understands. You can also filter on any field that a
dissector adds to the tree view, but only if the dissector has added an abbreviation for the field. A
list of such fields is available in Wireshark in the Add Expression… dialog box. You can find more
information on the Add Expression… dialog box in Section 6.5, “The “Filter Expression” dialog box”.
For example, to narrow the packet list pane down to only those packets to or from the IP address
192.168.0.1, use ip.addr==192.168.0.1.
Note
To remove the filter, click on the Clear button to the right of the filter field.
73
Working with captured packets
6.4. Building display filter expressions
Wireshark provides a simple but powerful display filter language that allows you to build quite
complex filter expressions. You can compare values in packets as well as combine expressions into
more specific expressions. The following sections provide more information on doing this.
Tip
You will find a lot of Display Filter examples at the Wireshark Wiki Display Filter page
at: https://wiki.wireshark.org/DisplayFilters.
6.4.1. Display filter fields
Every field in the packet details pane can be used as a filter string, this will result in showing only
the packets where this field exists. For example: the filter string: tcp will show all packets containing
the tcp protocol.
There is a complete list of all filter fields available through the menu item Help → Supported Protocols
in the page “Display Filter Fields” of the “Supported Protocols” dialog.
6.4.2. Comparing values
You can build display filters that compare values using a number of different comparison operators.
They are shown in Table 6.4, “Display Filter comparison operators”.
Tip
You can use English and C-like terms in the same way, they can even be mixed in a
filter string.
Table 6.4. Display Filter comparison operators
English
C-like
Description and example
eq
==
Equal. ip.src==10.0.0.5
ne
!=
Not equal. ip.src!
=10.0.0.5
gt
>
Greater than. frame.len >
10
lt
<
Less than. frame.len <
128
ge
>=
Greater than or equal to.
frame.len ge 0x100
le
<=
Less than or equal to.
frame.len <= 0x20
In addition, all protocol fields have a type. Table 6.5, “Display Filter Field Types” provides a list of
the types and example of how to express them.
Table 6.5. Display Filter Field Types
Type
Example
Unsigned integer (8-bit, 16-bit, 24-bit, 32-bit)
You can express integers in decimal, octal, or
hexadecimal. The following display filters are
equivalent: ---- ip.len le 1500 ip.len le 02734
ip.len le 0x436 ----
74
Working with captured packets
Type
Example
Signed integer (8-bit, 16-bit, 24-bit, 32-bit)
Boolean
A boolean field is present in the protocol
decode only if its value is true. For example,
tcp.flags.syn is present, and thus true, only if the
SYN flag is present in a TCP segment header.
Thus the filter expression tcp.flags.syn will
select only those packets for which this flag
exists, that is, TCP segments where the segment
header contains the SYN flag. Similarly, to find
source-routed token ring packets, use a filter
expression of tr.sr.
Ethernet address (6 bytes)
Separators can be a colon (:), dot (.) or dash
(-) and can have one or two bytes between
separators: ---- eth.dst == ff:ff:ff:ff:ff:ff eth.dst
== ff-ff-ff-ff-ff-ff eth.dst == ffff.ffff.ffff ----
IPv4 address
ip.addr == 192.168.0.1
Classless InterDomain Routing (CIDR) notation
can be used to test if an IPv4 address is in a
certain subnet. For example, this display filter
will find all packets in the 129.111 Class-B
network:
ip.addr == 129.111.0.0/16
IPv6 address
ipv6.addr == ::1
String (text)
http.request.uri == "https://www.wireshark.org/"
6.4.3. Combining expressions
You can combine filter expressions in Wireshark using the logical operators shown in Table 6.6,
“Display Filter Logical Operations”
Table 6.6. Display Filter Logical Operations
English
C-like
Description and example
and
&&
Logical AND.
ip.src==10.0.0.5 and
tcp.flags.fin
or
||
Logical OR.
ip.scr==10.0.0.5 or
ip.src==192.1.1.1
xor
^^
Logical XOR. tr.dst[0:3]
== 0.6.29 xor
tr.src[0:3] == 0.6.29
not
!
Logical NOT. not llc
[…]
Substring Operator. Wireshark
allows you to select
subsequences of a sequence in
rather elaborate ways. After
a label you can place a pair
of brackets [] containing a
comma separated list of range
75
Working with captured packets
English
C-like
Description and example
specifiers. ---- eth.src[0:3] ==
00:00:83 ---- The example
above uses the n:m format to
specify a single range. In this
case n is the beginning offset
and m is the length of the range
being specified. ---- eth.src[1-2]
== 00:83 ---- The example
above uses the n-m format to
specify a single range. In this
case n is the beginning offset
and m is the ending offset.
---- eth.src[:4] == 00:00:83:00
---- The example above uses
the :m format, which takes
everything from the beginning
of a sequence to offset m. It is
equivalent to 0:m ---- eth.src[4:]
== 20:20 ---- The example
above uses the n: format, which
takes everything from offset
n to the end of the sequence.
---- eth.src[2] == 83 ---- The
example above uses the n
format to specify a single range.
In this case the element in the
sequence at offset n is selected.
This is equivalent to n:1. ---eth.src[0:3,1-2,:4,4:,2] ==
00:00:83:00:83:00:00:83:00:20:20:83
---- Wireshark allows you to
string together single ranges in
a comma separated list to form
compound ranges as shown
above.
6.4.4. Membership Operator.
Wireshark allows you to test a field for membership in a set of values or fields. After the field name,
use the in operator followed by the set items surrounded by braces {}.
tcp.port in {80 443 8080}
This can be considered a shortcut operator, as the previous expression could have been expressed as:
tcp.port == 80 || tcp.port == 443 || tcp.port == 8080
6.4.5. A common mistake
Using the != operator on combined expressions like eth.addr, ip.addr, tcp.port, and udp.port will
probably not work as expected.
Often people use a filter string to display something like ip.addr == 1.2.3.4 which will display
all packets containing the IP address 1.2.3.4.
Then they use ip.addr != 1.2.3.4 to see all packets not containing the IP address 1.2.3.4 in
it. Unfortunately, this does not do the expected.
76
Working with captured packets
Instead, that expression will even be true for packets where either source or destination IP address
equals 1.2.3.4. The reason for this, is that the expression ip.addr != 1.2.3.4 must be read as
“the packet contains a field named ip.addr with a value different from 1.2.3.4”. As an IP datagram
contains both a source and a destination address, the expression will evaluate to true whenever at least
one of the two addresses differs from 1.2.3.4.
If you want to filter out all packets containing IP datagrams to or from IP address 1.2.3.4, then the
correct filter is !(ip.addr == 1.2.3.4) as it reads “show me all the packets for which it is not
true that a field named ip.addr exists with a value of 1.2.3.4”, or in other words, “filter out all packets
for which there are no occurrences of a field named ip.addr with the value 1.2.3.4”.
6.5. The “Filter Expression” dialog box
When you are accustomed to Wireshark’s filtering system and know what labels you wish to use in
your filters it can be very quick to simply type a filter string. However if you are new to Wireshark
or are working with a slightly unfamiliar protocol it can be very confusing to try to figure out what to
type. The “Filter Expression” dialog box helps with this.
Tip
The “Filter Expression” dialog box is an excellent way to learn how to write Wireshark
display filter strings.
Figure 6.7. The “Filter Expression” dialog box
When you first bring up the Filter Expression dialog box you are shown a tree of field names, organized
by protocol, and a box for selecting a relation.
Field Name
Select a protocol field from the protocol field tree. Every protocol with filterable
fields is listed at the top level. (You can search for a particular protocol entry by
entering the first few letters of the protocol name). By expanding a protocol name
you can get a list of the field names available for filtering for that protocol.
Relation
Select a relation from the list of available relation. The is present is a unary
relation which is true if the selected field is present in a packet. All other listed
relations are binary relations which require additional data (e.g. a Value to match)
to complete.
When you select a field from the field name list and select a binary relation (such as the equality
relation ==) you will be given the opportunity to enter a value, and possibly some range information.
Value
You may enter an appropriate value in the Value text box. The Value
will also indicate the type of value for the field name you have selected
(like character string).
Predefined values
Some of the protocol fields have predefined values available, much
like enum’s in C. If the selected protocol field has such values defined,
you can choose one of them here.
Range
A range of integers or a group of ranges, such as 1-12 or
39-42,98-2000.
OK
When you have built a satisfactory expression click OK and a filter
string will be built for you.
Cancel
You can leave the “Add Expression…” dialog box without any effect
by clicking the Cancel button.
77
Working with captured packets
6.6. Defining and saving filters
You can define filters with Wireshark and give them labels for later use. This can save time in
remembering and retyping some of the more complex filters you use.
To define a new filter or edit an existing one, select Capture → Capture Filters… or Analyze →
Display Filters…. Wireshark will then pop up the Filters dialog as shown in Figure 6.8, “The “Capture
Filters” and “Display Filters” dialog boxes”.
The mechanisms for defining and saving capture filters and display filters are almost identical. Both
will be described here but the differences between these two will be marked as such.
Warning
You must use Save to save your filters permanently. OK or Apply will not save the filters
and they will be lost when you close Wireshark.
Figure 6.8. The “Capture Filters” and “Display Filters” dialog boxes
New
This button adds a new filter to the list of filters. The currently entered
values from Filter name and Filter string will be used. If any of these fields
are empty, it will be set to “new”.
Delete
This button deletes the selected filter. It will be greyed out, if no filter is
selected.
Filter
You can select a filter from this list (which will fill in the filter name and
filter string in the fields down at the bottom of the dialog box).
Filter name:
You can change the name of the currently selected filter here.
The filter name will only be used in this dialog to identify the filter for
your convenience, it will not be used elsewhere. You can add multiple
filters with the same name, but this is not very useful.
Filter string:
You can change the filter string of the currently selected filter here.
Display Filter only: the string will be syntax checked while you are typing.
Add Expression…
Display Filter only: This button brings up the Add Expression dialog box
which assists in building filter strings. You can find more information
about the Add Expression dialog in Section 6.5, “The “Filter Expression”
dialog box”
OK
Display Filter only: This button applies the selected filter to the current
display and closes the dialog.
Apply
Display Filter only: This button applies the selected filter to the current
display, and keeps the dialog open.
Save
Save the current settings in this dialog. The file location and format is
explained in Appendix B, Files and Folders.
Close
Close this dialog. This will discard unsaved settings.
6.7. Defining and saving filter macros
You can define filter macros with Wireshark and give them labels for later use. This can save time in
remembering and retyping some of the more complex filters you use.
78
Working with captured packets
6.8. Finding packets
You can easily find packets once you have captured some packets or have read in a previously saved
capture file. Simply select the Find Packet… menu item from the Edit menu. Wireshark will pop up
the dialog box shown in Figure 6.9, “The “Find Packet” dialog box”.
6.8.1. The “Find Packet” dialog box
Figure 6.9. The “Find Packet” dialog box
You might first select the kind of thing to search for:
• Display filter
Simply enter a display filter string into the Filter: field, select a direction, and click on OK.
For example, to find the three way handshake for a connection from host 192.168.0.1, use the
following filter string:
ip.src==192.168.0.1 and tcp.flags.syn==1
For more details on display filters, see Section 6.3, “Filtering packets while viewing”
• Hex Value
Search for a specific byte sequence in the packet data.
For example, use “00:00” to find the next packet including two null bytes in the packet data.
• String
Find a string in the packet data, with various options.
The value to be found will be syntax checked while you type it in. If the syntax check of your value
succeeds, the background of the entry field will turn green, if it fails, it will turn red.
You can choose the search direction:
• Up
Search upwards in the packet list (decreasing packet numbers).
• Down
Search downwards in the packet list (increasing packet numbers).
6.8.2. The “Find Next” command
“Find Next” will continue searching with the same options used in the last “Find Packet”.
6.8.3. The “Find Previous” command
“Find Previous” will do the same thing as “Find Next”, but in the reverse direction.
6.9. Go to a specific packet
You can easily jump to specific packets with one of the menu items in the Go menu.
79
Working with captured packets
6.9.1. The “Go Back” command
Go back in the packet history, works much like the page history in current web browsers.
6.9.2. The “Go Forward” command
Go forward in the packet history, works much like the page history in current web browsers.
6.9.3. The “Go to Packet” dialog box
Figure 6.10. The “Go To Packet” dialog box
This dialog box will let you enter a packet number. When you press OK, Wireshark will jump to that
packet.
6.9.4. The “Go to Corresponding Packet” command
If a protocol field is selected which points to another packet in the capture file, this command will
jump to that packet.
As these protocol fields now work like links (just as in your Web browser), it’s easier to simply doubleclick on the field to jump to the corresponding field.
6.9.5. The “Go to First Packet” command
This command will simply jump to the first packet displayed.
6.9.6. The “Go to Last Packet” command
This command will simply jump to the last packet displayed.
6.10. Marking packets
You can mark packets in the “Packet List” pane. A marked packet will be shown with black
background, regardless of the coloring rules set. Marking a packet can be useful to find it later while
analyzing in a large capture file.
The packet marks are not stored in the capture file or anywhere else. All packet marks will be lost
when you close the capture file.
You can use packet marking to control the output of packets when saving, exporting, or printing. To
do so, an option in the packet range is available, see Section 5.9, “The “Packet Range” frame”.
There are three functions to manipulate the marked state of a packet:
• Mark packet (toggle) toggles the marked state of a single packet.
• Mark all displayed packets set the mark state of all displayed packets.
• Unmark all packets reset the mark state of all packets.
These mark functions are available from the “Edit” menu, and the “Mark packet (toggle)” function is
also available from the pop-up menu of the “Packet List” pane.
80
Working with captured packets
6.11. Ignoring packets
You can ignore packets in the “Packet List” pane. Wireshark will then pretend that this packets does not
exist in the capture file. An ignored packet will be shown with white background and gray foreground,
regardless of the coloring rules set.
The packet ignored marks are not stored in the capture file or anywhere else. All “packet ignored”
marks will be lost when you close the capture file.
There are three functions to manipulate the ignored state of a packet:
• Ignore packet (toggle) toggles the ignored state of a single packet.
• Ignore all displayed packets set the ignored state of all displayed packets.
• Un-Ignore all packets reset the ignored state of all packets.
These ignore functions are available from the “Edit” menu, and the “Ignore packet (toggle)” function
is also available from the pop-up menu of the “Packet List” pane.
6.12. Time display formats and time
references
While packets are captured, each packet is timestamped. These timestamps will be saved to the capture
file, so they will be available for later analysis.
A detailed description of timestamps, timezones and alike can be found at: Section 7.4, “Time Stamps”.
The timestamp presentation format and the precision in the packet list can be chosen using the View
menu, see Figure 3.5, “The “View” Menu”.
The available presentation formats are:
• Date and Time of Day: 1970-01-01 01:02:03.123456 The absolute date and time of the day when
the packet was captured.
• Time of Day: 01:02:03.123456 The absolute time of the day when the packet was captured.
• Seconds Since Beginning of Capture: 123.123456 The time relative to the start of the capture file
or the first “Time Reference” before this packet (see Section 6.12.1, “Packet time referencing”).
• Seconds Since Previous Captured Packet: 1.123456 The time relative to the previous captured
packet.
• Seconds Since Previous Displayed Packet: 1.123456 The time relative to the previous displayed
packet.
• Seconds Since Epoch (1970-01-01): 1234567890.123456 The time relative to epoch (midnight UTC
of January 1, 1970).
The available precisions (aka. the number of displayed decimal places) are:
• Automatic The timestamp precision of the loaded capture file format will be used (the default).
• Seconds, Deciseconds, Centiseconds, Milliseconds, Microseconds or Nanoseconds The timestamp
precision will be forced to the given setting. If the actually available precision is smaller, zeros will
be appended. If the precision is larger, the remaining decimal places will be cut off.
Precision example: If you have a timestamp and it’s displayed using, “Seconds Since Previous
Packet”, : the value might be 1.123456. This will be displayed using the “Automatic” setting for
81
Working with captured packets
libpcap files (which is microseconds). If you use Seconds it would show simply 1 and if you use
Nanoseconds it shows 1.123456000.
6.12.1. Packet time referencing
The user can set time references to packets. A time reference is the starting point for all subsequent
packet time calculations. It will be useful, if you want to see the time values relative to a special packet,
e.g. the start of a new request. It’s possible to set multiple time references in the capture file.
The time references will not be saved permanently and will be lost when you close the capture file.
Time referencing will only be useful if the time display format is set to “Seconds Since Beginning
of Capture”. If one of the other time display formats are used, time referencing will have no effect
(and will make no sense either).
To work with time references, choose one of the Time Reference items in the Edit menu or from the
pop-up menu of the “Packet List” pane. See Section 3.6, “The “Edit” menu”.
• Set Time Reference (toggle) Toggles the time reference state of the currently selected packet to on
or off.
• Find Next Find the next time referenced packet in the “Packet List” pane.
• Find Previous Find the previous time referenced packet in the “Packet List” pane.
Figure 6.11. Wireshark showing a time referenced packet
A time referenced packet will be marked with the string *REF* in the Time column (see packet number
10). All subsequent packets will show the time since the last time reference.
82
Chapter 7. Advanced Topics
7.1. Introduction
This chapter some of Wireshark’s advanced features.
7.2. Following TCP streams
If you are working with TCP based protocols it can be very helpful to see the data from a TCP stream
in the way that the application layer sees it. Perhaps you are looking for passwords in a Telnet stream,
or you are trying to make sense of a data stream. Maybe you just need a display filter to show only the
packets of that TCP stream. If so, Wireshark’s ability to follow a TCP stream will be useful to you.
Simply select a TCP packet in the packet list of the stream/connection you are interested in and then
select the Follow TCP Stream menu item from the Wireshark Tools menu (or use the context menu
in the packet list). Wireshark will set an appropriate display filter and pop up a dialog box with all
the data from the TCP stream laid out in order, as shown in Figure 7.1, “The “Follow TCP Stream”
dialog box”.
Note
Opening the “Follow TCP Stream” installs a display filter to select all the packets in the
TCP stream you have selected.
7.2.1. The “Follow TCP Stream” dialog box
Figure 7.1. The “Follow TCP Stream” dialog box
The stream content is displayed in the same sequence as it appeared on the network. Traffic from A
to B is marked in red, while traffic from B to A is marked in blue. If you like, you can change these
colors in the “Colors” page if the “Preferences” dialog.
Non-printable characters will be replaced by dots.
The stream content won’t be updated while doing a live capture. To get the latest content you’ll have
to reopen the dialog.
You can choose from the following actions:
1. Save As: Save the stream data in the currently selected format.
2. Print: Print the stream data in the currently selected format.
3. Direction: Choose the stream direction to be displayed (“Entire conversation”, “data from A to B
only” or “data from B to A only”).
4. Filter out this stream: Apply a display filter removing the current TCP stream data from the display.
5. Close: Close this dialog box, leaving the current display filter in effect.
You can choose to view the data in one of the following formats:
1. ASCII: In this view you see the data from each direction in ASCII. Obviously best for ASCII based
protocols, e.g. HTTP.
2. EBCDIC: For the big-iron freaks out there.
83
Advanced Topics
3. HEX Dump: This allows you to see all the data. This will require a lot of screen space and is best
used with binary protocols.
4. C Arrays: This allows you to import the stream data into your own C program.
5. Raw: This allows you to load the unaltered stream data into a different program for further
examination. The display will look the same as the ASCII setting, but “Save As” will result in a
binary file.
7.3. Expert Information
The expert infos is a kind of log of the anomalies found by Wireshark in a capture file.
The general idea behind the following “Expert Info” is to have a better display of “uncommon” or
just notable network behaviour. This way, both novice and expert users will hopefully find probable
network problems a lot faster, compared to scanning the packet list “manually” .
Expert infos are only a hint
Take expert infos as a hint what’s worth looking at, but not more. For example, the
absence of expert infos doesn’t necessarily mean everything is OK.
The amount of expert infos largely depends on the protocol being used. While some common protocols
like TCP/IP will show detailed expert infos, most other protocols currently won’t show any expert
infos at all.
The following will first describe the components of a single expert info, then the User Interface.
7.3.1. Expert Info Entries
Each expert info will contain the following things which will be described in detail below.
Table 7.1. Some example expert infos
Packet #
Severity
Group
Protocol
Summary
1
Note
Sequence
TCP
Duplicate ACK
(#1)
2
Chat
Sequence
TCP
Connection reset
(RST)
8
Note
Sequence
TCP
Keep-Alive
9
Warn
Sequence
TCP
Fast
retransmission
(suspected)
7.3.1.1. Severity
Every expert info has a specific severity level. The following severity levels are used, in parentheses
are the colors in which the items will be marked in the GUI:
• Chat (grey): information about usual workflow, e.g. a TCP packet with the SYN flag set
• Note (cyan): notable things, e.g. an application returned an “usual” error code like HTTP 404
• Warn (yellow): warning, e.g. application returned an “unusual” error code like a connection problem
• Error (red): serious problem, e.g. [Malformed Packet]
84
Advanced Topics
7.3.1.2. Group
There are some common groups of expert infos. The following are currently implemented:
• Checksum: a checksum was invalid
• Sequence: protocol sequence suspicious, e.g. sequence wasn’t continuous or a retransmission was
detected or …
• Response Code: problem with application response code, e.g. HTTP 404 page not found
• Request Code: an application request (e.g. File Handle == x), usually Chat level
• Undecoded: dissector incomplete or data can’t be decoded for other reasons
• Reassemble: problems while reassembling, e.g. not all fragments were available or an exception
happened while reassembling
• Protocol: violation of protocol specs (e.g. invalid field values or illegal lengths), dissection of this
packet is probably continued
• Malformed: malformed packet or dissector has a bug, dissection of this packet aborted
• Debug: debugging (should not occur in release versions)
It’s possible that more groups will be added in the future.
7.3.1.3. Protocol
The protocol in which the expert info was caused.
7.3.1.4. Summary
Each expert info will also have a short additional text with some further explanation.
7.3.2. “Expert Info” dialog
You can open the expert info dialog by selecting Analyze → Expert Info.
Figure 7.2. The “Expert Info” dialog box
7.3.2.1. Errors / Warnings / Notes / Chats tabs
An easy and quick way to find the most interesting infos (rather than using the Details tab), is to have
a look at the separate tabs for each severity level. As the tab label also contains the number of existing
entries, it’s easy to find the tab with the most important entries.
There are usually a lot of identical expert infos only differing in the packet number. These identical
infos will be combined into a single line - with a count column showing how often they appeared in
the capture file. Clicking on the plus sign shows the individual packet numbers in a tree view.
7.3.2.2. Details tab
The Details tab provides the expert infos in a “log like” view, each entry on its own line (much like
the packet list). As the amount of expert infos for a capture file can easily become very large, getting
an idea of the interesting infos with this view can take quite a while. The advantage of this tab is to
have all entries in the sequence as they appeared, this is sometimes a help to pinpoint problems.
85
Advanced Topics
7.3.3. “Colorized” Protocol Details Tree
Figure 7.3. The “Colorized” protocol details tree
The protocol field causing an expert info is colorized, e.g. uses a cyan background for a note severity
level. This color is propagated to the toplevel protocol item in the tree, so it’s easy to find the field
that caused the expert info.
For the example screenshot above, the IP “Time to live” value is very low (only 1), so the
corresponding protocol field is marked with a cyan background. To easier find that item in the packet
tree, the IP protocol toplevel item is marked cyan as well.
7.3.4. “Expert” Packet List Column (optional)
Figure 7.4. The “Expert” packet list column
An optional “Expert Info Severity” packet list column is available that displays the most significant
severity of a packet or stays empty if everything seems OK. This column is not displayed by default
but can be easily added using the Preferences Columns page described in Section 10.5, “Preferences”.
7.4. Time Stamps
Time stamps, their precisions and all that can be quite confusing. This section will provide you with
information about what’s going on while Wireshark processes time stamps.
While packets are captured, each packet is time stamped as it comes in. These time stamps will be
saved to the capture file, so they also will be available for (later) analysis.
So where do these time stamps come from? While capturing, Wireshark gets the time stamps from the
libpcap (WinPcap) library, which in turn gets them from the operating system kernel. If the capture
data is loaded from a capture file, Wireshark obviously gets the data from that file.
7.4.1. Wireshark internals
The internal format that Wireshark uses to keep a packet time stamp consists of the date (in days since
1.1.1970) and the time of day (in nanoseconds since midnight). You can adjust the way Wireshark
displays the time stamp data in the packet list, see the “Time Display Format” item in the Section 3.7,
“The “View” menu” for details.
While reading or writing capture files, Wireshark converts the time stamp data between the capture
file format and the internal format as required.
While capturing, Wireshark uses the libpcap (WinPcap) capture library which supports microsecond
resolution. Unless you are working with specialized capturing hardware, this resolution should be
adequate.
7.4.2. Capture file formats
Every capture file format that Wireshark knows supports time stamps. The time stamp precision
supported by a specific capture file format differs widely and varies from one second “0” to one
nanosecond “0.123456789”. Most file formats store the time stamps with a fixed precision (e.g.
microseconds), while some file formats are even capable of storing the time stamp precision itself
(whatever the benefit may be).
The common libpcap capture file format that is used by Wireshark (and a lot of other tools) supports
a fixed microsecond resolution “0.123456” only.
86
Advanced Topics
Writing data into a capture file format that doesn’t provide the capability to store the actual precision
will lead to loss of information. For example, if you load a capture file with nanosecond resolution
and store the capture data in a libpcap file (with microsecond resolution) Wireshark obviously must
reduce the precision from nanosecond to microsecond.
7.4.3. Accuracy
People often ask “Which time stamp accuracy is provided by Wireshark?”. Well, Wireshark doesn’t
create any time stamps itself but simply gets them from “somewhere else” and displays them. So
accuracy will depend on the capture system (operating system, performance, etc) that you use. Because
of this, the above question is difficult to answer in a general way.
Note
USB connected network adapters often provide a very bad time stamp accuracy. The
incoming packets have to take “a long and winding road” to travel through the USB cable
until they actually reach the kernel. As the incoming packets are time stamped when they
are processed by the kernel, this time stamping mechanism becomes very inaccurate.
Don’t use USB connected NICs when you need precise time stamp accuracy.
7.5. Time Zones
If you travel across the planet, time zones can be confusing. If you get a capture file from somewhere
around the world time zones can even be a lot more confusing ;-)
First of all, there are two reasons why you may not need to think about time zones at all:
• You are only interested in the time differences between the packet time stamps and don’t need to
know the exact date and time of the captured packets (which is often the case).
• You don’t get capture files from different time zones than your own, so there are simply no time
zone problems. For example, everyone in your team is working in the same time zone as yourself.
What are time zones?
People expect that the time reflects the sunset. Dawn should be in the morning maybe around
06:00 and dusk in the evening maybe at 20:00. These times will obviously vary depending on
the season. It would be very confusing if everyone on earth would use the same global time as
this would correspond to the sunset only at a small part of the world.
For that reason, the earth is split into several different time zones, each zone with a local time
that corresponds to the local sunset.
The time zone’s base time is UTC (Coordinated Universal Time) or Zulu Time (military and
aviation). The older term GMT (Greenwich Mean Time) shouldn’t be used as it is slightly
incorrect (up to 0.9 seconds difference to UTC). The UTC base time equals to 0 (based at
Greenwich, England) and all time zones have an offset to UTC between -12 to +14 hours!
For example: If you live in Berlin you are in a time zone one hour earlier than UTC, so you are
in time zone “+1” (time difference in hours compared to UTC). If it’s 3 o’clock in Berlin it’s
2 o’clock in UTC “at the same moment”.
Be aware that at a few places on earth don’t use time zones with even hour offsets (e.g. New
Delhi uses UTC+05:30)!
Further information can be found at: https://en.wikipedia.org/wiki/Time_zone and https://
en.wikipedia.org/wiki/Coordinated_Universal_Time.
87
Advanced Topics
What is daylight saving time (DST)?
Daylight Saving Time (DST), also known as Summer Time is intended to “save” some daylight
during the summer months. To do this, a lot of countries (but not all!) add a DST hour to the
already existing UTC offset. So you may need to take another hour (or in very rare cases even
two hours!) difference into your “time zone calculations”.
Unfortunately, the date at which DST actually takes effect is different throughout the world.
You may also note, that the northern and southern hemispheres have opposite DST’s (e.g. while
it’s summer in Europe it’s winter in Australia).
Keep in mind: UTC remains the same all year around, regardless of DST!
Further information can be found at https://en.wikipedia.org/wiki/Daylight_saving.
Further time zone and DST information can be found at http://wwp.greenwichmeantime.com/ and
http://www.timeanddate.com/worldclock/.
7.5.1. Set your computer’s time correctly!
If you work with people around the world it’s very helpful to set your computer’s time and time zone
right.
You should set your computers time and time zone in the correct sequence:
1. Set your time zone to your current location
2. Set your computer’s clock to the local time
This way you will tell your computer both the local time and also the time offset to UTC. Many
organizations simply set the time zone on their servers and networking gear to UTC in order to make
coordination and troubleshooting easier.
Tip
If you travel around the world, it’s an often made mistake to adjust the hours of your
computer clock to the local time. Don’t adjust the hours but your time zone setting
instead! For your computer, the time is essentially the same as before, you are simply in
a different time zone with a different local time.
You can use the Network Time Protocol (NTP) to automatically adjust your computer to the correct
time, by synchronizing it to Internet NTP clock servers. NTP clients are available for all operating
systems that Wireshark supports (and for a lot more), for examples see: http://www.ntp.org/.
7.5.2. Wireshark and Time Zones
So what’s the relationship between Wireshark and time zones anyway?
Wireshark’s native capture file format (libpcap format), and some other capture file formats, such as
the Windows Sniffer, EtherPeek, AiroPeek, and Sun snoop formats, save the arrival time of packets
as UTC values. UN*X systems, and “Windows NT based” systems represent time internally as UTC.
When Wireshark is capturing, no conversion is necessary. However, if the system time zone is not set
correctly, the system’s UTC time might not be correctly set even if the system clock appears to display
correct local time. When capturing, WinPcap has to convert the time to UTC before supplying it to
Wireshark. If the system’s time zone is not set correctly, that conversion will not be done correctly.
Other capture file formats, such as the Microsoft Network Monitor, DOS-based Sniffer, and Network
Instruments Observer formats, save the arrival time of packets as local time values.
88
Advanced Topics
Internally to Wireshark, time stamps are represented in UTC. This means that when reading capture
files that save the arrival time of packets as local time values, Wireshark must convert those local time
values to UTC values.
Wireshark in turn will display the time stamps always in local time. The displaying computer will
convert them from UTC to local time and displays this (local) time. For capture files saving the arrival
time of packets as UTC values, this means that the arrival time will be displayed as the local time in
your time zone, which might not be the same as the arrival time in the time zone in which the packet
was captured. For capture files saving the arrival time of packets as local time values, the conversion to
UTC will be done using your time zone’s offset from UTC and DST rules, which means the conversion
will not be done correctly; the conversion back to local time for display might undo this correctly, in
which case the arrival time will be displayed as the arrival time in which the packet was captured.
Table 7.2. Time zone examples for UTC arrival times (without DST)
Los Angeles New York
Madrid
London
Berlin
Tokyo
Capture File 10:00
(UTC)
10:00
10:00
10:00
10:00
10:00
Local Offset -8
to UTC
-5
-1
0
+1
+9
Displayed
02:00
Time (Local
Time)
05:00
09:00
10:00
11:00
19:00
For example let’s assume that someone in Los Angeles captured a packet with Wireshark at exactly
2 o’clock local time and sends you this capture file. The capture file’s time stamp will be represented
in UTC as 10 o’clock. You are located in Berlin and will see 11 o’clock on your Wireshark display.
Now you have a phone call, video conference or Internet meeting with that one to talk about that
capture file. As you are both looking at the displayed time on your local computers, the one in Los
Angeles still sees 2 o’clock but you in Berlin will see 11 o’clock. The time displays are different as
both Wireshark displays will show the (different) local times at the same point in time.
Conclusion: You may not bother about the date/time of the time stamp you currently look at unless
you must make sure that the date/time is as expected. So, if you get a capture file from a different
time zone and/or DST, you’ll have to find out the time zone/DST difference between the two local
times and “mentally adjust” the time stamps accordingly. In any case, make sure that every computer
in question has the correct time and time zone setting.
7.6. Packet Reassembly
7.6.1. What is it?
Network protocols often need to transport large chunks of data which are complete in themselves, e.g.
when transferring a file. The underlying protocol might not be able to handle that chunk size (e.g.
limitation of the network packet size), or is stream-based like TCP, which doesn’t know data chunks
at all.
In that case the network protocol has to handle the chunk boundaries itself and (if required) spread the
data over multiple packets. It obviously also needs a mechanism to determine the chunk boundaries
on the receiving side.
Wireshark calls this mechanism reassembly, although a specific protocol specification might use a
different term for this (e.g. desegmentation, defragmentation, etc).
89
Advanced Topics
7.6.2. How Wireshark handles it
For some of the network protocols Wireshark knows of, a mechanism is implemented to find, decode
and display these chunks of data. Wireshark will try to find the corresponding packets of this chunk,
and will show the combined data as additional pages in the “Packet Bytes” pane (for information about
this pane. See Section 3.20, “The “Packet Bytes” pane”).
Figure 7.5. The “Packet Bytes” pane with a reassembled tab
Reassembly might take place at several protocol layers, so it’s possible that multiple tabs in the “Packet
Bytes” pane appear.
Note
You will find the reassembled data in the last packet of the chunk.
For example, in a HTTP GET response, the requested data (e.g. an HTML page) is returned. Wireshark
will show the hex dump of the data in a new tab “Uncompressed entity body” in the “Packet Bytes”
pane.
Reassembly is enabled in the preferences by default but can be disabled in the preferences for the
protocol in question. Enabling or disabling reassembly settings for a protocol typically requires two
things:
1. The lower level protocol (e.g., TCP) must support reassembly. Often this reassembly can be enabled
or disabled via the protocol preferences.
2. The higher level protocol (e.g., HTTP) must use the reassembly mechanism to reassemble
fragmented protocol data. This too can often be enabled or disabled via the protocol preferences.
The tooltip of the higher level protocol setting will notify you if and which lower level protocol setting
also has to be considered.
7.7. Name Resolution
Name resolution tries to convert some of the numerical address values into a human readable format.
There are two possible ways to do these conversions, depending on the resolution to be done: calling
system/network services (like the gethostname() function) and/or resolve from Wireshark specific
configuration files. For details about the configuration files Wireshark uses for name resolution and
alike, see Appendix B, Files and Folders.
The name resolution feature can be enabled individually for the protocol layers listed in the following
sections.
7.7.1. Name Resolution drawbacks
Name resolution can be invaluable while working with Wireshark and may even save you hours of
work. Unfortunately, it also has its drawbacks.
• Name resolution will often fail. The name to be resolved might simply be unknown by the name
servers asked, or the servers are just not available and the name is also not found in Wireshark’s
configuration files.
• The resolved names are not stored in the capture file or somewhere else. So the resolved names
might not be available if you open the capture file later or on a different machine. Each time you
open a capture file it may look “slightly different” simply because you can’t connect to the name
server (which you could connect to before).
90
Advanced Topics
• DNS may add additional packets to your capture file. You may see packets to/from your machine in
your capture file, which are caused by name resolution network services of the machine Wireshark
captures from.
• Resolved DNS names are cached by Wireshark. This is required for acceptable performance.
However, if the name resolution information should change while Wireshark is running, Wireshark
won’t notice a change in the name resolution information once it gets cached. If this information
changes while Wireshark is running, e.g. a new DHCP lease takes effect, Wireshark won’t notice it.
Name resolution in the packet list is done while the list is filled. If a name can be resolved after a packet
is added to the list, its former entry won’t be changed. As the name resolution results are cached, you
can use View → Reload to rebuild the packet list with the correctly resolved names. However, this
isn’t possible while a capture is in progress.
7.7.2. Ethernet name resolution (MAC layer)
Try to resolve an Ethernet MAC address (e.g. 00:09:5b:01:02:03) to something more “human
readable”.
ARP name resolution (system service): Wireshark will ask the operating system to convert an Ethernet
address to the corresponding IP address (e.g. 00:09:5b:01:02:03 → 192.168.0.1).
Ethernet codes (ethers file): If the ARP name resolution failed, Wireshark tries to convert the Ethernet
address to a known device name, which has been assigned by the user using an ethers file (e.g.
00:09:5b:01:02:03 → homerouter).
Ethernet manufacturer codes (manuf file): If neither ARP or ethers returns a result, Wireshark tries to
convert the first 3 bytes of an ethernet address to an abbreviated manufacturer name, which has been
assigned by the IEEE (e.g. 00:09:5b:01:02:03 → Netgear_01:02:03).
7.7.3. IP name resolution (network layer)
Try to resolve an IP address (e.g. 216.239.37.99) to something more “human readable”.
DNS/concurrent DNS name resolution (system/library service): Wireshark will ask the operating
system (or the concurrent DNS library), to convert an IP address to the hostname associated with it
(e.g. 216.239.37.99 → www.1.google.com). The DNS service is using synchronous calls to the DNS
server. So Wireshark will stop responding until a response to a DNS request is returned. If possible,
you might consider using the concurrent DNS library (which won’t wait for a name server response).
Warning
Enabling network name resolution when your name server is unavailable may
significantly slow down Wireshark while it waits for all of the name server requests to
time out. Always use concurrent DNS resolution.
DNS vs. concurrent DNS: here’s a short comparison: Both mechanisms are used to convert an IP
address to some human readable (domain) name. The usual DNS call gethostname() will try to convert
the address to a name. To do this, it will first ask the systems hosts file (e.g. /etc/hosts) if it finds a
matching entry. If that fails, it will ask the configured DNS server(s) about the name.
So the real difference between DNS and concurrent DNS comes when the system has to wait for the
DNS server about a name resolution. The system call gethostname() will wait until a name is resolved
or an error occurs. If the DNS server is unavailable, this might take quite a while (several seconds).
The concurrent DNS service works a bit differently. It will also ask the DNS server, but it won’t wait
for the answer. It will just return to Wireshark in a very short amount of time. The actual (and the
following) address fields won’t show the resolved name until the DNS server returns an answer. As
91
Advanced Topics
mentioned above, the values get cached, so you can use View → Reload to “update” these fields to
show the resolved values.
hosts name resolution (hosts file): If DNS name resolution failed, Wireshark will try to convert an IP
address to the hostname associated with it, using a hosts file provided by the user (e.g. 216.239.37.99
→ www.google.com).
7.7.4. TCP/UDP port name resolution (transport layer)
Try to resolve a TCP/UDP port (e.g. 80) to something more “human readable”.
TCP/UDP port conversion (system service): Wireshark will ask the operating system to convert a TCP
or UDP port to its well known name (e.g. 80 → http).
7.8. Checksums
Several network protocols use checksums to ensure data integrity. Applying checksums as described
here is also known as redundancy checking.
What are checksums for?
Checksums are used to ensure the integrity of data portions for data transmission or storage. A
checksum is basically a calculated summary of such a data portion.
Network data transmissions often produce errors, such as toggled, missing or duplicated bits.
As a result, the data received might not be identical to the data transmitted, which is obviously
a bad thing.
Because of these transmission errors, network protocols very often use checksums to detect
such errors. The transmitter will calculate a checksum of the data and transmits the data together
with the checksum. The receiver will calculate the checksum of the received data with the
same algorithm as the transmitter. If the received and calculated checksums don’t match a
transmission error has occurred.
Some checksum algorithms are able to recover (simple) errors by calculating where the expected
error must be and repairing it.
If there are errors that cannot be recovered, the receiving side throws away the packet.
Depending on the network protocol, this data loss is simply ignored or the sending side needs
to detect this loss somehow and retransmits the required packet(s).
Using a checksum drastically reduces the number of undetected transmission errors. However,
the usual checksum algorithms cannot guarantee an error detection of 100%, so a very small
number of transmission errors may remain undetected.
There are several different kinds of checksum algorithms; an example of an often used checksum
algorithm is CRC32. The checksum algorithm actually chosen for a specific network protocol
will depend on the expected error rate of the network medium, the importance of error detection,
the processor load to perform the calculation, the performance needed and many other things.
Further information about checksums can be found at: https://en.wikipedia.org/wiki/Checksum.
7.8.1. Wireshark checksum validation
Wireshark will validate the checksums of many protocols, e.g. IP, TCP, UDP, etc.
It will do the same calculation as a “normal receiver” would do, and shows the checksum fields in the
packet details with a comment, e.g. [correct] or [invalid, must be 0x12345678].
92
Advanced Topics
Checksum validation can be switched off for various protocols in the Wireshark protocol preferences,
e.g. to (very slightly) increase performance.
If the checksum validation is enabled and it detected an invalid checksum, features like packet
reassembly won’t be processed. This is avoided as incorrect connection data could “confuse” the
internal database.
7.8.2. Checksum offloading
The checksum calculation might be done by the network driver, protocol driver or even in hardware.
For example: The Ethernet transmitting hardware calculates the Ethernet CRC32 checksum and the
receiving hardware validates this checksum. If the received checksum is wrong Wireshark won’t even
see the packet, as the Ethernet hardware internally throws away the packet.
Higher level checksums are “traditionally” calculated by the protocol implementation and the
completed packet is then handed over to the hardware.
Recent network hardware can perform advanced features such as IP checksum calculation, also known
as checksum offloading. The network driver won’t calculate the checksum itself but will simply hand
over an empty (zero or garbage filled) checksum field to the hardware.
Note
Checksum offloading often causes confusion as the network packets to be transmitted
are handed over to Wireshark before the checksums are actually calculated. Wireshark
gets these “empty” checksums and displays them as invalid, even though the packets
will contain valid checksums when they leave the network hardware later.
Checksum offloading can be confusing and having a lot of [invalid] messages on the screen can be
quite annoying. As mentioned above, invalid checksums may lead to unreassembled packets, making
the analysis of the packet data much harder.
You can do two things to avoid this checksum offloading problem:
• Turn off the checksum offloading in the network driver, if this option is available.
• Turn off checksum validation of the specific protocol in the Wireshark preferences. Recent releases
of Wireshark disable checksum validation by default due to the prevalance of offloading in modern
hardware and operating systems.
93
Chapter 8. Statistics
8.1. Introduction
Wireshark provides a wide range of network statistics which can be accessed via the Statistics menu.
These statistics range from general information about the loaded capture file (like the number of
captured packets), to statistics about specific protocols (e.g. statistics about the number of HTTP
requests and responses captured).
• General statistics:
• Summary about the capture file.
• Protocol Hierarchy of the captured packets.
• Conversations e.g. traffic between specific IP addresses.
• Endpoints e.g. traffic to and from an IP addresses.
• IO Graphs visualizing the number of packets (or similar) in time.
• Protocol specific statistics:
• Service Response Time between request and response of some protocols.
• Various other protocol specific statistics.
Note
The protocol specific statistics require detailed knowledge about the specific protocol.
Unless you are familiar with that protocol, statistics about it will be pretty hard to
understand.
8.2. The Summary window
General statistics about the current capture file.
Figure 8.1. The "Summary" window
• File: general information about the capture file.
• Time: the timestamps when the first and the last packet were captured (and the time between them).
• Capture: information from the time when the capture was done (only available if the packet data
was captured from the network and not loaded from a file).
• Display: some display related information.
• Traffic: some statistics of the network traffic seen. If a display filter is set, you will see values in the
Captured column, and if any packages are marked, you will see values in the Marked column. The
values in the Captured column will remain the same as before, while the values in the Displayed
column will reflect the values corresponding to the packets shown in the display. The values in the
Marked column will reflect the values corresponding to the marked packages.
94
Statistics
8.3. The "Protocol Hierarchy" window
The protocol hierarchy of the captured packets.
Figure 8.2. The "Protocol Hierarchy" window
This is a tree of all the protocols in the capture. Each row contains the statistical values of one protocol.
Two of the columns (Percent Packets and Percent Bytes) serve double duty as bar graphs. If a display
filter is set it will be shown at the bottom.
The Copy button will let you copy the window contents as CSV or YAML.
Protocol hierarchy columns
Protocol
This protocol’s name
Percent Packets
The percentage of protocol packets relative to all packets in the capture
Packets
The total number of packets of this protocol
Percent Bytes
The percentage of protocol bytes relative to the total bytes in the capture
Bytes
The total number of bytes of this protocol
Bits/s
The bandwidth of this protocol relative to the capture time
End Packets
The absolute number of packets of this protocol where it was the highest
protocol in the stack (last dissected)
End Bytes
The absolute number of bytes of this protocol where it was the highest
protocol in the stack (last dissected)
End Bits/s
The bandwidth of this protocol relative to the capture time where was the
highest protocol in the stack (last dissected)
Packets usually contain multiple protocols. As a result more than one protocol will be counted for
each packet. Example: In the screenshot IP has 99.9% and TCP 98.5% (which is together much more
than 100%).
Protocol layers can consist of packets that won’t contain any higher layer protocol, so the sum of all
higher layer packets may not sum up to the protocols packet count. Example: In the screenshot TCP
has 98.5% but the sum of the subprotocols (SSL, HTTP, etc) is much less. This can be caused by
continuation frames, TCP protocol overhead, and other undissected data.
A single packet can contain the same protocol more than once. In this case, the protocol is counted
more than once. For example ICMP replies and many tunneling protocols will carry more than one
IP header.
8.4. Conversations
A network conversation is the traffic between two specific endpoints. For example, an IP conversation
is all the traffic between two IP addresses. The description of the known endpoint types can be found
in Section 8.5, “Endpoints”.
8.4.1. The “Conversations” window
The conversations window is similar to the endpoint Window. See Section 8.5.1, “The "Endpoints"
window” for a description of their common features. Along with addresses, packet counters, and byte
95
Statistics
counters the conversation window adds four columns: the time in seconds between the start of the
capture and the start of the conversation ("Rel Start"), the duration of the conversation in seconds, and
the average bits (not bytes) per second in each direction.
Figure 8.3. The "Conversations" window
Each row in the list shows the statistical values for exactly one conversation.
Name resolution will be done if selected in the window and if it is active for the specific protocol
layer (MAC layer for the selected Ethernet endpoints page). Limit to display filter will only show
conversations matching the current display filter.
The Copy button will copy the list values to the clipboard in CSV (Comma Separated Values) or
YAML format. The Follow Stream… button will show the stream contents as described in Figure 7.1,
“The “Follow TCP Stream” dialog box” dialog. The Graph… button will show a graph as described
in Section 8.6, “The "IO Graphs" window”.
Conversation Types lets you choose which traffic type tabs are shown. See Section 8.5, “Endpoints”
for a list of endpoint types. The enabled types are saved in your profile settings.
Tip
This window will be updated frequently so it will be useful even if you open it before
(or while) you are doing a live capture.
8.5. Endpoints
A network endpoint is the logical endpoint of separate protocol traffic of a specific protocol layer. The
endpoint statistics of Wireshark will take the following endpoints into account:
Tip
If you are looking for a feature other network tools call a hostlist, here is the right place
to look. The list of Ethernet or IP endpoints is usually what you’re looking for.
Endpoint and Conversation types
Bluetooth
A MAC-48 address similar to Ethernet.
Ethernet
Identical to the Ethernet device’s MAC-48 identifier.
Fibre Channel
A MAC-48 address similar to Ethernet.
IEEE 802.11
A MAC-48 address similar to Ethernet.
FDDI
Identical to the FDDI MAC-48 address.
IPv4
Identical to the 32-bit IPv4 address.
IPv6
Identical to the 128-bit IPv6 address.
IPX
A concatenation of a 32 bit network number and 48 bit node address, by
default the Ethernet interface’s MAC-48 address.
JXTA
A 160 bit SHA-1 URN.
NCP
Similar to IPX.
96
Statistics
RSVP
A combination of varios RSVP session attributes and IPv4 addresses.
SCTP
A combination of the host IP addresses (plural) and the SCTP port used. So
different SCTP ports on the same IP address are different SCTP endpoints,
but the same SCTP port on different IP addresses of the same host are still
the same endpoint.
TCP
A combination of the IP address and the TCP port used. Different TCP ports
on the same IP address are different TCP endpoints.
Token Ring
Identical to the Token Ring MAC-48 address.
UDP
A combination of the IP address and the UDP port used, so different UDP
ports on the same IP address are different UDP endpoints.
USB
Identical to the 7-bit USB address.
Broadcast and multicast endpoints
Broadcast and multicast traffic will be shown separately as additional endpoints. Of
course, as these aren’t physical endpoints the real traffic will be received by some or all
of the listed unicast endpoints.
8.5.1. The "Endpoints" window
This window shows statistics about the endpoints captured.
Figure 8.4. The “Endpoints” window
For each supported protocol, a tab is shown in this window. Each tab label shows the number of
endpoints captured (e.g. the tab label “Ethernet · 4” tells you that four ethernet endpoints have been
captured). If no endpoints of a specific protocol were captured, the tab label will be greyed out
(although the related page can still be selected).
Each row in the list shows the statistical values for exactly one endpoint.
Name resolution will be done if selected in the window and if it is active for the specific protocol
layer (MAC layer for the selected Ethernet endpoints page). Limit to display filter will only show
conversations matching the current display filter. Note that in this example we have GeoIP configured
which gives us extra geographic columns. See Section 10.10, “GeoIP Database Paths” for more
information.
The Copy button will copy the list values to the clipboard in CSV (Comma Separated Values) or
YAML format. The Map button will show the endpoints mapped in your web browser.
Endpoint Types lets you choose which traffic type tabs are shown. See Section 8.5, “Endpoints” above
for a list of endpoint types. The enabled types are saved in your profile settings.
Tip
This window will be updated frequently, so it will be useful even if you open it before
(or while) you are doing a live capture.
8.6. The "IO Graphs" window
User configurable graph of the captured network packets.
97
Statistics
You can define up to five differently colored graphs.
Figure 8.5. The "IO Graphs" window
The user can configure the following things:
• Graphs
• Graph 1-5: enable the specific graph 1-5 (only graph 1 is enabled by default)
• Color: the color of the graph (cannot be changed)
• Filter: a display filter for this graph (only the packets that pass this filter will be taken into account
for this graph)
• Style: the style of the graph (Line/Impulse/FBar/Dot)
• X Axis
• Tick interval: an interval in x direction lasts (10/1 minutes or 10/1/0.1/0.01/0.001 seconds)
• Pixels per tick: use 10/5/2/1 pixels per tick interval
• View as time of day: option to view x direction labels as time of day instead of seconds or minutes
since beginning of capture
• Y Axis
• Unit: the unit for the y direction (Packets/Tick, Bytes/Tick, Bits/Tick, Advanced…) [XXX describe the Advanced feature.]
• Scale: the scale for the y unit (Logarithmic,Auto,10,20,50,100,200,500,…)
The Save button will save the currently displayed portion of the graph as one of various file formats.
The Copy button will copy values from selected graphs to the clipboard in CSV (Comma Separated
Values) format.
Tip
Click in the graph to select the first package in the selected interval.
8.7. Service Response Time
The service response time is the time between a request and the corresponding response. This
information is available for many protocols.
Service response time statistics are currently available for the following protocols:
• DCE-RPC
• Fibre Channel
• H.225 RAS
• LDAP
• LTE MAC
• MGCP
98
Statistics
• ONC-RPC
• SMB
As an example, the DCE-RPC service response time is described in more detail.
Note
The other Service Response Time windows will work the same way (or only slightly
different) compared to the following description.
8.7.1. The "Service Response Time DCE-RPC" window
The service response time of DCE-RPC is the time between the request and the corresponding
response.
First of all, you have to select the DCE-RPC interface:
Figure 8.6. The "Compute DCE-RPC statistics" window
You can optionally set a display filter, to reduce the amount of packets.
Figure 8.7. The "DCE-RPC Statistic for …" window
Each row corresponds to a method of the interface selected (so the EPM interface in version 3 has 7
methods). For each method the number of calls, and the statistics of the SRT time is calculated.
8.8. Compare two capture files
Compare two capture files.
This feature works best when you have merged two capture files chronologically, one from each side
of a client/server connection.
The merged capture data is checked for missing packets. If a matching connection is found it is checked
for:
• IP header checksums
• Excessive delay (defined by the "Time variance" setting)
• Packet order
Figure 8.8. The "Compare" window
You can configure the following:
• Start compare: Start comparing when this many IP IDs are matched. A zero value starts comparing
immediately.
• Stop compare: Stop comparing when we can no longer match this many IP IDs. Zero always
compares.
• Endpoint distinction: Use MAC addresses or IP time-to-live values to determine connection
endpoints.
99
Statistics
• Check order: Check for the same IP ID in the previous packet at each end.
• Time variance: Trigger an error if the packet arrives this many milliseconds after the average delay.
• Filter: Limit comparison to packets that match this display filter.
The info column contains new numbering so the same packets are parallel.
The color filtering differentiate the two files from each other. A “zebra” effect is create if the Info
column is sorted.
Tip
If you click on an item in the error list its corresponding packet will be selected in the
main window.
8.9. WLAN Traffic Statistics
Statistics of the captured WLAN traffic. This window will summarize the wireless network traffic
found in the capture. Probe requests will be merged into an existing network if the SSID matches.
Figure 8.9. The "WLAN Traffic Statistics" window
Each row in the list shows the statistical values for exactly one wireless network.
Name resolution will be done if selected in the window and if it is active for the MAC layer.
Only show existing networks will exclude probe requests with a SSID not matching any network from
the list.
The Copy button will copy the list values to the clipboard in CSV (Comma Separated Values) format.
Tip
This window will be updated frequently, so it will be useful, even if you open it before
(or while) you are doing a live capture.
8.10. The protocol specific statistics windows
The protocol specific statistics windows display detailed information of specific protocols and might
be described in a later version of this document.
Some of these statistics are described at https://wiki.wireshark.org/Statistics.
100
Chapter 9. Telephony
9.1. Introduction
Wireshark provides a wide range of telephony related network statistics which can be accessed via
the Telephony menu.
These statistics range from specific signaling protocols, to analysis of signaling and media flows. If
encoded in a compatible encoding the media flow can even be played.
9.2. RTP Analysis
The RTP analysis function takes the selected RTP stream (and the reverse stream, if possible) and
generates a list of statistics on it.
Figure 9.1. The “RTP Stream Analysis” window
Starting with basic data as packet number and sequence number, further statistics are created based
on arrival time, delay, jitter, packet size, etc.
Besides the per packet statistics, the lower pane shows the overall statistics, with minimums and
maximums for delta, jitter and clock skew. Also an indication of lost packets is included.
The RTP Stream Analysis window further provides the option to save the RTP payload (as raw data
or, if in a PCM encoding, in an Audio file). Other options a to export and plot various statistics on
the RTP streams.
9.3. IAX2 Analysis
The “IAX2 Analysis” dialog shows statistics for the forward and reverse streams of a selected IAX2
call along with a graph.
9.4. VoIP Calls
The VoIP Calls window shows a list of all detected VoIP calls in the captured traffic. It finds calls
by their signaling.
More details can be found on the https://wiki.wireshark.org/VoIP_calls page.
The RTP Player window lets you play back RTP audio data. In order to use this feature your version
of Wireshark must support audio and the codecs used by each RTP stream.
More details can be found on the https://wiki.wireshark.org/VoIP_calls page.
9.5. LTE MAC Traffic Statistics
Statistics of the captured LTE MAC traffic. This window will summarize the LTE MAC traffic found
in the capture.
Figure 9.2. The “LTE MAC Traffic Statistics” window
101
Telephony
The top pane shows statistics for common channels. Each row in the middle pane shows statistical
highlights for exactly one UE/C-RNTI. In the lower pane, you can see the for the currently selected
UE/C-RNTI the traffic broken down by individual channel.
9.6. LTE RLC Traffic Statistics
Statistics of the captured LTE RLC traffic. This window will summarize the LTE RLC traffic found
in the capture.
Figure 9.3. The “LTE RLC Traffic Statistics” window
At the top, the check-box allows this window to include RLC PDUs found within MAC PDUs or not.
This will affect both the PDUs counted as well as the display filters generated (see below).
The upper list shows summaries of each active UE. Each row in the lower list shows statistical
highlights for individual channels within the selected UE.
The lower part of the windows allows display filters to be generated and set for the selected channel.
Note that in the case of Acknowledged Mode channels, if a single direction is chosen, the generated
filter will show data in that direction and control PDUs in the opposite direction.
9.7. The protocol specific statistics windows
The protocol specific statistics windows display detailed information of specific protocols and might
be described in a later version of this document.
Some of these statistics are described at the https://wiki.wireshark.org/Statistics pages.
102
Chapter 10. Customizing Wireshark
10.1. Introduction
Wireshark’s default behaviour will usually suit your needs pretty well. However, as you become more
familiar with Wireshark, it can be customized in various ways to suit your needs even better. In this
chapter we explore:
• How to start Wireshark with command line parameters
• How to colorize the packet list
• How to control protocol dissection
• How to use the various preference settings
10.2. Start Wireshark from the command line
You can start Wireshark from the command line, but it can also be started from most Window managers
as well. In this section we will look at starting it from the command line.
Wireshark supports a large number of command line parameters. To see what they are, simply enter the
command wireshark -h and the help information shown in Example 10.1, “Help information available
from Wireshark” (or something similar) should be printed.
Example 10.1. Help information available from Wireshark
Wireshark 2.1.0 (v2.1.0rc0-502-g328fbc0 from master)
Interactively dump and analyze network traffic.
See https://www.wireshark.org for more information.
Usage: wireshark [options] ... [ <infile> ]
Capture interface:
-i <interface>
-f <capture filter>
-s <snaplen>
-p
-k
-S
-l
-I
-B <buffer size>
-y <link type>
-D
-L
Capture stop conditions:
-c <packet count>
-a <autostop cond.> ...
name or idx of interface (def: first non-loopback)
packet filter in libpcap filter syntax
packet snapshot length (def: 65535)
don't capture in promiscuous mode
start capturing immediately (def: do nothing)
update packet display when new packets are captured
turn on automatic scrolling while -S is in use
capture in monitor mode, if available
size of kernel buffer (def: 2MB)
link layer type (def: first appropriate)
print list of interfaces and exit
print list of link-layer types of iface and exit
stop after n
duration:NUM
filesize:NUM
files:NUM
packets (def: infinite)
- stop after NUM seconds
- stop this file after NUM KB
- stop after NUM files
Capture output:
-b <ringbuffer opt.> ... duration:NUM - switch to next file after NUM secs
filesize:NUM - switch to next file after NUM KB
files:NUM - ringbuffer: replace after NUM files
RPCAP options:
-A <user>:<password>
use RPCAP password authentication
Input file:
-r <infile>
set the filename to read from (no pipes or stdin!)
Processing:
-R <read filter>
packet filter in Wireshark display filter syntax
103
Customizing Wireshark
-n
disable all name resolutions (def: all enabled)
-N <name resolve flags> enable specific name resolution(s): "mnNtCd"
--disable-protocol <proto_name>
disable dissection of proto_name
--enable-heuristic <short_name>
enable dissection of heuristic protocol
--disable-heuristic <short_name>
disable dissection of heuristic protocol
User
-C
-Y
-g
-J
-j
-m
-t
-u
-X
-z
interface:
<config profile>
<display filter>
<packet number>
<jump filter>
<font>
a|ad|d|dd|e|r|u|ud
s|hms
<key>:<value>
<statistics>
Output:
-w <outfile|->
Miscellaneous:
-h
-v
-P <key>:<path>
-o <name>:<value> ...
-K <keytab>
start with specified configuration profile
start with the given display filter
go to specified packet number after "-r"
jump to the first packet matching the (display)
filter
search backwards for a matching packet after "-J"
set the font name used for most text
output format of time stamps (def: r: rel. to first)
output format of seconds (def: s: seconds)
eXtension options, see man page for details
show various statistics, see man page for details
set the output filename (or '-' for stdout)
display this help and exit
display version info and exit
persconf:path - personal configuration files
persdata:path - personal data files
override preference or recent setting
keytab file to use for kerberos decryption
We will examine each of the command line options in turn.
The first thing to notice is that issuing the command wireshark by itself will bring up Wireshark.
However, you can include as many of the command line parameters as you like. Their meanings are
as follows ( in alphabetical order ):
-a <capture autostop condition>
-b <capture ring buffer option>
Specify a criterion that specifies when Wireshark is to stop
writing to a capture file. The criterion is of the form test:value,
where test is one of:
duration:value
Stop writing to a capture file after
value of seconds have elapsed.
filesize:value
Stop writing to a capture file after
it reaches a size of value kilobytes
(where a kilobyte is 1000 bytes,
not 1024 bytes). If this option is
used together with the -b option,
Wireshark will stop writing to the
current capture file and switch to the
next one if filesize is reached.
files:value
Stop writing to capture files after
value number of files were written.
If a maximum capture file size was specified, this option causes
Wireshark to run in “ring buffer” mode, with the specified
number of files. In “ring buffer” mode, Wireshark will write to
several capture files. Their name is based on the number of the
file and on the creation date and time.
When the first capture file fills up Wireshark will switch to
writing to the next file, and so on. With the <command>files</
104
Customizing Wireshark
command> option it’s also possible to form a “ring buffer.”
This will fill up new files until the number of files specified, at
which point the data in the first file will be discarded so a new
file can be written.
If the optional <command>duration</command> is specified,
Wireshark will also switch to the next file when the specified
number of seconds has elapsed even if the current file is not
completely fills up.
duration</command>:value
Switch to the next
file after value seconds
have elapsed, even if
the current file is not
completely filled up.
filesize</command>:value
Switch to the next file
after it reaches a size of
value kilobytes (where
a kilobyte is 1000 bytes,
not 1024 bytes).
files</command>:value
Begin again with the
first file after value
number of files were
written (form a ring
buffer).
-B <capture buffer size>
Set capture buffer size (in MB, default is 1MB). This is used
by the capture driver to buffer packet data until that data can be
written to disk. If you encounter packet drops while capturing,
try to increase this size. Not supported on some platforms.
-c <capture packet count>
This option specifies the maximum number of packets to
capture when capturing live data. It would be used in
conjunction with the -k option.
-D
Print a list of the interfaces on which Wireshark can capture,
then exit. For each network interface, a number and an interface
name, possibly followed by a text description of the interface,
is printed. The interface name or the number can be supplied to
the -i flag to specify an interface on which to capture.
This can be useful on systems that don’t have a command to
list them (e.g., Windows systems, or UNIX systems lacking
ifconfig -a). The number can be especially useful on
Windows, where the interface name is a GUID.
Note that “can capture” means that Wireshark was able to open
that device to do a live capture. If, on your system, a program
doing a network capture must be run from an account with
special privileges (for example, as root), then, if Wireshark is
run with the -D flag and is not run from such an account, it will
not list any interfaces.
-f <capture filter>
This option sets the initial capture filter expression to be used
when capturing packets.
-g <packet number>
After reading in a capture file using the -r flag, go to the given
packet number.
105
Customizing Wireshark
-h
The -h option requests Wireshark to print its version and usage
instructions (as shown above) and exit.
-i <capture interface>
Set the name of the network interface or pipe to use for live
packet capture.
Network interface names should match one of the names listed
in wireshark -D (described above). A number, as reported
by wireshark -D, can also be used. If you’re using UNIX,
netstat -i or ifconfig -a might also work to list
interface names, although not all versions of UNIX support the
-a flag to ifconfig.
If no interface is specified, Wireshark searches the list of
interfaces, choosing the first non-loopback interface if there are
any non-loopback interfaces, and choosing the first loopback
interface if there are no non-loopback interfaces; if there are
no interfaces, Wireshark reports an error and doesn’t start the
capture.
Pipe names should be either the name of a FIFO (named pipe)
or “-” to read data from the standard input. Data read from pipes
must be in standard libpcap format.
-J <jump filter>
After reading in a capture file using the -r flag, jump to
the first packet which matches the filter expression. The filter
expression is in display filter format. If an exact match cannot
be found the first packet afterwards is selected.
-I
Capture wireless packets in monitor mode if available.
-j
Use this option after the -J option to search backwards for a
first packet to go to.
-k
The -k option specifies that Wireshark should start capturing
packets immediately. This option requires the use of the -i
parameter to specify the interface that packet capture will occur
from.
-K <keytab file>
Use the specified file for Kerberos decryption.
-l
This option turns on automatic scrolling if the packet list pane is
being updated automatically as packets arrive during a capture
( as specified by the -S flag).
-L
List the data link types supported by the interface and exit.
-m <font>
This option sets the name of the font used for most text
displayed by Wireshark.
-n
Disable network object name resolution (such as hostname,
TCP and UDP port names).
-N <name resolving flags>
Turns on name resolving for particular types of addresses and
port numbers. The argument is a string that may contain the
letters m to enable MAC address resolution, n to enable network
address resolution, and t to enable transport-layer port number
resolution. This overrides -n if both -N and -n are present.
The letter C enables concurrent (asynchronous) DNS lookups.
The letter d enables resolution from captured DNS packets.
106
Customizing Wireshark
-o <preference or recent settings>
Sets a preference or recent value, overriding the default value
and any value read from a preference or recent file. The
argument to the flag is a string of the form prefname:value,
where prefname is the name of the preference (which is
the same name that would appear in the preferences or
recent file), and value is the value to which it should be set.
Multiple instances of `-o <preference settings> ` can be given
on a single command line.
An example of setting a single preference would be:
wireshark -o mgcp.display_dissect_tree:TRUE
An example of setting multiple preferences would be:
wireshark -o mgcp.display_dissect_tree:TRUE -o mgcp.udp.callagent_p
You can get a list of all available preference strings from the
preferences file. See Appendix B, Files and Folders for details.
User access tables can be overridden using “uat,” followed by
the UAT file name and a valid record for the file:
wireshark -o "uat:user_dlts:\"User 0 (DLT=147)\",\"http\",\"0\",\"\
The example above would dissect packets with a libpcap data
link type 147 as HTTP, just as if you had configured it in the
DLT_USER protocol preferences.
-p
Don’t put the interface into promiscuous mode. Note that the
interface might be in promiscuous mode for some other reason.
Hence, -p cannot be used to ensure that the only traffic that
is captured is traffic sent to or from the machine on which
Wireshark is running, broadcast traffic, and multicast traffic to
addresses received by that machine.
-P <path setting>
Special path settings usually detected automatically. This is
used for special cases, e.g. starting Wireshark from a known
location on an USB stick.
The criterion is of the form key:path, where key is one of:
persconf:path
Path of personal configuration files,
like the preferences files.
persdata:path
Path of personal data files, it’s the
folder initially opened. After the
initialization, the recent file will keep
the folder last used.
-Q
This option forces Wireshark to exit when capturing is
complete. It can be used with the -c option. It must be used in
conjunction with the -i and -w options.
-r <infile>
This option provides the name of a capture file for Wireshark to
read and display. This capture file can be in one of the formats
Wireshark understands.
-R <read (display) filter>
This option specifies a display filter to be applied when reading
packets from a capture file. The syntax of this filter is that of
the display filters discussed in Section 6.3, “Filtering packets
while viewing”. Packets not matching the filter are discarded.
107
Customizing Wireshark
-s <capture snapshot length>
This option specifies the snapshot length to use when capturing
packets. Wireshark will only capture snaplen bytes of data for
each packet.
-S
This option specifies that Wireshark will display packets as
it captures them. This is done by capturing in one process
and displaying them in a separate process. This is the same as
“Update list of packets in real time” in the “Capture Options”
dialog box.
-t <time stamp format>
This option sets the format of packet timestamps that are
displayed in the packet list window. The format can be one of:
r
Relative, which specifies timestamps are displayed
relative to the first packet captured.
a
Absolute, which specifies that actual times be
displayed for all packets.
ad
Absolute with date, which specifies that actual dates
and times be displayed for all packets.
d
Delta, which specifies that timestamps are relative to
the previous packet.
e
Epoch, which specifies that timestamps are seconds
since epoch (Jan 1, 1970 00:00:00)
-u <s | hms>
Show timesamps as seconds (s, the default) or hours, minutes,
and seconts (hms)
-v
The -v option requests Wireshark to print out its version
information and exit.
-w <savefile>
This option sets the name of the file to be used to save captured
packets.
-y <capture link type>
If a capture is started from the command line with -k, set
the data link type to use while capturing packets. The values
reported by -L are the values that can be used.
-X <eXtension option>
Specify an option to be passed to a TShark module. The
eXtension option is in the form extension_key:value, where
extension_key can be:
lua_script:lua_script_filename
Tells Wireshark to load
the given script in
addition to the default
Lua scripts.
lua_script[num]:argument
Tells Wireshark to pass
the given argument
to the lua script
identified by num,
which is the number
indexed order of the
lua_script command.
For
example,
if
only one script was
loaded
with
-X
lua_script:my.lua,
108
Customizing Wireshark
then
-X
lua_script1:foo
will pass the string foo
to the my.lua script.
If two scripts were
loaded, such as -X
lua_script:my.lua
and
-X
lua_script:other.lua
in that order, then a -X
lua_script2:bar
would pass the string
bar to the second
lua script, namely
other.lua.
-z <statistics-string>
Get Wireshark to collect various types of statistics and display
the result in a window that updates in semi-real time.
10.3. Packet colorization
A very useful mechanism available in Wireshark is packet colorization. You can set up Wireshark so
that it will colorize packets according to a display filter. This allows you to emphasize the packets
you might be interested in.
You can find a lot of coloring rule examples at the Wireshark Wiki Coloring Rules page at https://
wiki.wireshark.org/ColoringRules.
There are two types of coloring rules in Wireshark: temporary rules that are only in effect until you
quit the program, and permanent rules that are saved in a preference file so that they are available the
next time you run Wireshark.
Temporary rules can be added by selecting a packet and pressing the Ctrl key together with one of the
number keys. This will create a coloring rule based on the currently selected conversation. It will try
to create a conversation filter based on TCP first, then UDP, then IP and at last Ethernet. Temporary
filters can also be created by selecting the Colorize with Filter → Color X menu items when rightclicking in the packet detail pane.
To permanently colorize packets, select View → Coloring Rules…. Wireshark will display the
“Coloring Rules” dialog box as shown in Figure 10.1, “The “Coloring Rules” dialog box”.
Figure 10.1. The “Coloring Rules” dialog box
If this is the first time using the Coloring Rules dialog and you’re using the default configuration
profile you should see the default rules, shown above.
The first match wins
More specific rules should usually be listed before more general rules. For example, if
you have a coloring rule for UDP before the one for DNS, the rule for DNS may not be
applied (DNS is typically carried over UDP and the UDP rule will match first).
You can create a new rule by clicking on the + button. You can delete one or more rules by clicking
the - button. The “copy” button will duplicate a rule.
You can edit a rule by double-clicking on its name or filter. In Figure 10.1, “The “Coloring Rules”
dialog box” the name of the rule “Checksum Errors” is being edited. Clicking on the Foreground and
109
Customizing Wireshark
Background buttons will open a color chooser (Figure 10.2, “A color chooser”) for the foreground
(text) and background colors respectively.
Figure 10.2. A color chooser
The color chooser appearance depends on your operating system. The OS X color picker is shown.
Select the color you desire for the selected packets and click OK.
Figure 10.3, “Using color filters with Wireshark” shows an example of several color filters being used
in Wireshark. Note that the frame detail shows that the “Bad TCP” rule rule was applied, along with
the matching filter.
Figure 10.3. Using color filters with Wireshark
10.4. Control Protocol dissection
The user can control how protocols are dissected.
Each protocol has its own dissector, so dissecting a complete packet will typically involve several
dissectors. As Wireshark tries to find the right dissector for each packet (using static “routes” and
heuristics ``guessing"), it might choose the wrong dissector in your specific case. For example,
Wireshark won’t know if you use a common protocol on an uncommon TCP port, e.g. using HTTP
on TCP port 800 instead of the standard port 80.
There are two ways to control the relations between protocol dissectors: disable a protocol dissector
completely or temporarily divert the way Wireshark calls the dissectors.
10.4.1. The “Enabled Protocols” dialog box
The Enabled Protocols dialog box lets you enable or disable specific protocols. All protocols are
enabled by default. When a protocol is disabled, Wireshark stops processing a packet whenever that
protocol is encountered.
Note
Disabling a protocol will prevent information about higher-layer protocols from being
displayed. For example, suppose you disabled the IP protocol and selected a packet
containing Ethernet, IP, TCP, and HTTP information. The Ethernet information would
be displayed, but the IP, TCP and HTTP information would not - disabling IP would
prevent it and the other protocols from being displayed.
To enable or disable protocols select Analyze → Enabled Protocols…. Wireshark will pop up the
“Enabled Protocols” dialog box as shown in Figure 10.4, “The “Enabled Protocols” dialog box”.
Figure 10.4. The “Enabled Protocols” dialog box
To disable or enable a protocol, simply click on it using the mouse or press the space bar when the
protocol is highlighted. Note that typing the first few letters of the protocol name when the Enabled
Protocols dialog box is active will temporarily open a search text box and automatically select the first
matching protocol name (if it exists).
You must use the Save button to save your settings. The OK or Apply buttons will not save your
changes permanently and they will be lost when Wireshark is closed.
110
Customizing Wireshark
You can choose from the following actions:
1. Enable All: Enable all protocols in the list.
2. Disable All: Disable all protocols in the list.
3. Invert: Toggle the state of all protocols in the list.
4. OK: Apply the changes and close the dialog box.
5. Apply: Apply the changes and keep the dialog box open.
6. Save: Save the settings to the disabled_protos, see Appendix B, Files and Folders for details.
7. Cancel: Cancel the changes and close the dialog box.
10.4.2. User Specified Decodes
The “Decode As” functionality lets you temporarily divert specific protocol dissections. This might
be useful for example, if you do some uncommon experiments on your network.
Decode As is accessed by selecting the Analyze → Decode As…. Wireshark will pop up the “Decode
As” dialog box as shown in Figure 10.5, “The “Decode As” dialog box”.
Figure 10.5. The “Decode As” dialog box
The content of this dialog box depends on the selected packet when it was opened.
These settings will be lost if you quit Wireshark or change profile unless you save the entries in the
Show User Specified Decodes… windows (Section 10.4.3, “Show User Specified Decodes”).
1. Decode: Decode packets the selected way.
2. Do not decode: Do not decode packets the selected way.
3. Link/Network/Transport: Specify the network layer at which “Decode As” should take place.
Which of these pages are available depends on the content of the selected packet when this dialog
box is opened.
4. Show Current: Open a dialog box showing the current list of user specified decodes.
5. OK: Apply the currently selected decode and close the dialog box.
6. Apply: Apply the currently selected decode and keep the dialog box open.
7. Cancel: Cancel the changes and close the dialog box.
10.4.3. Show User Specified Decodes
This dialog box shows the currently active user specified decodes. These entries can be saved into
current profile for later session.
Figure 10.6. The “Decode As: Show” dialog box
1. OK: Close this dialog box.
2. Save: Save the entries in the table into current profile.
111
Customizing Wireshark
3. Clear: Removes all user specified decodes without updating the profile.
10.5. Preferences
There are a number of preferences you can set. Simply select the Edit → Preferences… (Wireshark →
Preferences… on OS X) and Wireshark will pop up the Preferences dialog box as shown in Figure 10.7,
“The preferences dialog box”, with the “User Interface” page as default. On the left side is a tree where
you can select the page to be shown.
• The OK button will apply the preferences settings and close the dialog.
• The Apply button will apply the preferences settings and keep the dialog open.
• The Cancel button will restore all preferences settings to the last saved state.
Figure 10.7. The preferences dialog box
10.5.1. Interface Options
In the “Capture” preferences it is possible to configure several options for the interfaces available on
your computer. Select the “Capture” pane and press the Edit button. In this window it is possible to
change the default link-layer header type for the interface, add a comment or choose to hide a interface
from other parts of the program.
Figure 10.8. The interface options dialog box
Each row contains options for each interface available on your computer.
• Device: the device name provided by the operating system.
• Description: provided by the operating system.
• Default link-layer: each interface may provide several link-layer header types. The default linklayer chosen here is the one used when you first start Wireshark. It is also possible to change this
value in Section 4.5, “The “Capture Options” dialog box” when you start a capture. For a detailed
description, see Section 4.12, “Link-layer header type”.
• Comment: a user provided description of the interface. This comment will be used as a description
instead of the operating system description.
• Hide?: enable this option to hide the interface from other parts of the program.
10.6. Configuration Profiles
Configuration Profiles can be used to configure and use more than one set of preferences and
configurations. Select the Configuration Profiles… menu item from the Edit menu, or simply press
Shift-Ctrl-A; and Wireshark will pop up the Configuration Profiles dialog box as shown in Figure 10.9,
“The configuration profiles dialog box”. It is also possible to click in the “Profile” part of the
statusbar to popup a menu with available Configuration Profiles (Figure 3.22, “The Statusbar with a
configuration profile menu”).
Configuration files stored in the Profiles:
• Preferences (preferences) (Section 10.5, “Preferences”)
112
Customizing Wireshark
• Capture Filters (cfilters) (Section 6.6, “Defining and saving filters”)
• Display Filters (dfilters) (Section 6.6, “Defining and saving filters”)
• Coloring Rules (colorfilters) (Section 10.3, “Packet colorization”)
• Disabled Protocols (disabled_protos) (Section 10.4.1, “The “Enabled Protocols” dialog box”)
• User Accessible Tables:
• Custom HTTP headers (custom_http_header_fields)
• Custom IMF headers (imf_header_fields)
• Custom LDAP AttributeValue types (custom_ldap_attribute_types)
• Display Filter Macros (dfilter_macros) (Section 10.8, “Display Filter Macros”)
• ESS Category Attributes (ess_category_attributes) (Section 10.9, “ESS Category Attributes”)
• GeoIP Database Paths (geoip_db_paths) (Section 10.10, “GeoIP Database Paths”)
• K12 Protocols (k12_protos) (Section 10.19, “Tektronix K12xx/15 RF5 protocols Table”)
• Object Identifier Names and Associated Syntaxes (Section 10.12, “Object Identifiers”)
• PRES Users Context List (pres_context_list) (Section 10.13, “PRES Users Context List”)
• SCCP Users Table (sccp_users) (Section 10.14, “SCCP users Table”)
• SNMP Enterprise Specific Trap Types (snmp_specific_traps) (Section 10.17, “SNMP Enterprise
Specific Trap Types”)
• SNMP Users (snmp_users) (Section 10.18, “SNMP users Table”)
• User DLTs Table (user_dlts) (Section 10.20, “User DLTs protocol table”)
• IKEv2 decryption table (ikev2_decryption_table) (Section 10.11, “IKEv2 decryption table”)
• Changed dissector assignments (decode_as_entries), which can be set in Decode As… dialog box
(Section 10.4.2, “User Specified Decodes”), and further saved in the User Specified Decodes…
window (Section 10.4.3, “Show User Specified Decodes”).
• Some recent settings (recent), such as pane sizes in the Main window (Section 3.3, “The Main
window”), column widths in the packet list (Section 3.18, “The “Packet List” pane”), all selections
in the “View” menu (Section 3.7, “The “View” menu”) and the last directory navigated to in the
File Open dialog.
All other configurations are stored in the personal configuration folder, and are common to all profiles.
Figure 10.9. The configuration profiles dialog box
New
This button adds a new profile to the profiles list. The name of
the created profile is “New profile” and can be changed in the
Properties field.
Copy
This button adds a new profile to the profiles list, copying all
configuration from the profile currently selected in the list. The
name of the created profile is the same as the copied profile,
with the text “(copy)” applied. The name can be changed in the
Properties field.
113
Customizing Wireshark
Delete
This button deletes the selected profile, including all
configuration files used in this profile. It is not possible to delete
the “Default” profile.
Configuration Profiles
You can select a configuration profile from this list (which will
fill in the profile name in the fields down at the bottom of the
dialog box).
Profile name
You can change the name of the currently selected profile here.
The profile name will be used as a folder name in the configured
“Personal configurations” folder. If adding multiple profiles
with the same name, only one profile will be created.
On Windows the profile name cannot start or end with a period
(.), and cannot contain any of the following characters: ‘\’, ‘/’,
‘:’, ‘*’, ‘?’, ‘`’, ‘<’, ‘>’, ‘|’, or ‘+’. On Unix the profile name
cannot contain the ‘/’ character.
OK
This button saves all changes, applies the selected profile and
closes the dialog.
Apply
This button saves all changes, applies the selected profile and
keeps the dialog open.
Cancel
Close this dialog. This will discard unsaved settings, new
profiles will not be added and deleted profiles will not be
deleted.
Help
Show this help page.
10.7. User Table
The User Table editor is used for managing various tables in wireshark. Its main dialog works very
similarly to that of Section 10.3, “Packet colorization”.
10.8. Display Filter Macros
Display Filter Macros are a mechanism to create shortcuts for complex filters. For example defining a
display filter macro named tcp_conv whose text is ( (ip.src == $1 and ip.dst == $2 and tcp.srcport ==
$3 and tcp.dstport == $4) or (ip.src == $2 and ip.dst == $1 and tcp.srcport == $4 and tcp.dstport
== $3) ) would allow to use a display filter like ${tcp_conv:10.1.1.2;10.1.1.3;1200;1400} instead of
typing the whole filter.
Display Filter Macros can be managed with a Section 10.7, “User Table” by selecting Analyze →
Display Filter Macros from the menu. The User Table has the following fields
Name
The name of the macro.
Text
The replacement text for the macro it uses $1, $2, $3, … as the input arguments.
10.9. ESS Category Attributes
Wireshark uses this table to map ESS Security Category attributes to textual representations. The
values to put in this table are usually found in a XML SPIF, which is used for defining security labels.
This table is handled by an Section 10.7, “User Table” with the following fields.
114
Customizing Wireshark
Tag Set
An Object Identifier representing the Category Tag Set.
Value
The value (Label And Cert Value) representing the Category.
Name
The textual representation for the value.
10.10. GeoIP Database Paths
If your copy of Wireshark supports MaxMind’s GeoIP library, you can use their databases to match IP
addresses to countries, cites, autonomous system numbers, ISPs, and other bits of information. Some
databases are available at no cost, while others require a licensing fee. See the MaxMind web site for
more information.
This table is handled by an Section 10.7, “User Table” with the following fields.
Database pathname
This specifies a directory containing GeoIP data files. Any files
beginning with Geo and ending with .dat will be automatically loaded.
A total of 8 files can be loaded.
The locations for your data files are up to you, but /usr/share/
GeoIP (Linux), C:\GeoIP (Windows), C:\Program Files
\Wireshark\GeoIP (Windows) might be good choices.
10.11. IKEv2 decryption table
Wireshark can decrypt Encrypted Payloads of IKEv2 (Internet Key Exchange version 2) packets if
necessary information is provided. Note that you can decrypt only IKEv2 packets with this feature. If
you want to decrypt IKEv1 packets or ESP packets, use Log Filename setting under ISAKMP protocol
preference or settings under ESP protocol preference respectively.
This table is handled by an Section 10.7, “User Table” with the following fields.
Initiator’s SPI
Initiator’s SPI of the IKE_SA. This field takes hexadecimal
string without “0x” prefix and the length must be 16 hex chars
(represents 8 octets).
Responder’s SPI
Responder’s SPI of the IKE_SA. This field takes hexadecimal
string without “0x” prefix and the length must be 16 hex chars
(represents 8 octets).
SK_ei
Key used to encrypt/decrypt IKEv2 packets from initiator to
responder. This field takes hexadecimal string without “0x” prefix
and its length must meet the requirement of the encryption
algorithm selected.
SK_er
Key used to encrypt/decrypt IKEv2 packets from responder to
initiator. This field takes hexadecimal string without “0x” prefix
and its length must meet the requirement of the encryption
algorithm selected.
Encryption Algorithm
Encryption algorithm of the IKE_SA.
SK_ai
Key used to calculate Integrity Checksum Data for IKEv2 packets
from responder to initiator. This field takes hexadecimal string
without “0x” prefix and its length must meet the requirement of
the integrity algorithm selected.
SK_ar
Key used to calculate Integrity Checksum Data for IKEv2 packets
from initiator to responder. This field takes hexadecimal string
115
Customizing Wireshark
without “0x” prefix and its length must meet the requirement of
the integrity algorithm selected.
Integrity Algorithm
Integrity algorithm of the IKE_SA.
10.12. Object Identifiers
Many protocols that use ASN.1 use Object Identifiers (OIDs) to uniquely identify certain pieces of
information. In many cases, they are used in an extension mechanism so that new object identifiers
(and associated values) may be defined without needing to change the base standard.
Whilst Wireshark has knowledge about many of the OIDs and the syntax of their associated values,
the extensibility means that other values may be encountered.
Wireshark uses this table to allow the user to define the name and syntax of Object Identifiers that
Wireshark does not know about (for example, a privately defined X.400 extension). It also allows
the user to override the name and syntax of Object Identifiers that Wireshark does know about (e.g.
changing the name “id-at-countryName” to just “c”).
This table is handled by an Section 10.7, “User Table” with the following fields.
OID
The string representation of the Object Identifier e.g. “2.5.4.6”.
Name
The name that should be displayed by Wireshark when the Object Identifier is dissected
e.g. (c);
Syntax
The syntax of the value associated with the Object Identifier. This must be one of the
syntaxes that Wireshark already knows about (e.g. “PrintableString”).
10.13. PRES Users Context List
Wireshark uses this table to map a presentation context identifier to a given object identifier when
the capture does not contain a PRES package with a presentation context definition list for the
conversation.
This table is handled by an Section 10.7, “User Table” with the following fields.
Context Id
An Integer representing the presentation context identifier for which this
association is valid.
Syntax Name OID
The object identifier representing the abstract syntax name, which defines
the protocol that is carried over this association.
10.14. SCCP users Table
Wireshark uses this table to map specific protocols to a certain DPC/SSN combination for SCCP.
This table is handled by an Section 10.7, “User Table” with the following fields.
Network Indicator
An Integer representing the network indicator for which this
association is valid.
Called DPCs
An range of integers representing the dpcs for which this association
is valid.
Called SSNs
An range of integers representing the ssns for which this association
is valid.
User protocol
The protocol that is carried over this association
116
Customizing Wireshark
10.15. SMI (MIB and PIB) Modules
If your copy of Wireshark supports libSMI, you can specify a list of MIB and PIB modules here. The
COPS and SNMP dissectors can use them to resolve OIDs.
Module name
The name of the module, e.g. IF-MIB.
10.16. SMI (MIB and PIB) Paths
If your copy of Wireshark supports libSMI, you can specify one or more paths to MIB and PIB modules
here.
Directory name
A module directory, e.g. /usr/local/snmp/mibs. Wireshark
automatically uses the standard SMI path for your system, so you usually
don’t have to add anything here.
10.17. SNMP Enterprise Specific Trap Types
Wireshark uses this table to map specific-trap values to user defined descriptions in a Trap PDU. The
description is shown in the packet details specific-trap element.
This table is handled by an Section 10.7, “User Table” with the following fields.
Enterprise OID
The object identifier representing the object generating the trap.
Trap Id
An Integer representing the specific-trap code.
Description
The description to show in the packet details.
10.18. SNMP users Table
Wireshark uses this table to verify authentication and to decrypt encrypted SNMPv3 packets.
This table is handled by an Section 10.7, “User Table” with the following fields.
Engine ID
If given this entry will be used only for packets whose engine
id is this. This field takes an hexadecimal string in the form
0102030405.
Username
This is the userName. When a single user has more than one
password for different SNMP-engines the first entry to match both
is taken, if you need a catch all engine-id (empty) that entry should
be the last one.
Authentication model
Which auth model to use (either “MD5” or “SHA1”).
Password
The authentication password. Use \xDD for unprintable
characters. An hexadecimal password must be entered as a
sequence of \xDD characters. For example the hex password
010203040506 must be entered as \x01\x02\x03\x04\x05\x06. The
\ character must be treated as an unprintable character, i.e. it must
be entered as \x5C or \x5c.
Privacy protocol
Which encryption algorithm to use (either “DES” or ``AES").
Privacy password
The privacy password. Use \xDD for unprintable characters. An
hexadecimal password must be entered as a sequence of \xDD
117
Customizing Wireshark
characters. For example the hex password 010203040506 must
be entered as \x01\x02\x03\x04\x05\x06. The \ character must be
treated as an unprintable character, i.e. it must be entered as \x5C
or \x5c.
10.19. Tektronix K12xx/15 RF5 protocols
Table
The Tektronix K12xx/15 rf5 file format uses helper files (*.stk) to identify the various protocols that
are used by a certain interface. Wireshark doesn’t read these stk files, it uses a table that helps it identify
which lowest layer protocol to use.
Stk file to protocol matching is handled by an Section 10.7, “User Table” with the following fields.
Match string
A partial match for an stk filename, the first match wins, so if you have a
specific case and a general one the specific one must appear first in the list.
Protocol
This is the name of the encapsulating protocol (the lowest layer in the
packet data) it can be either just the name of the protocol (e.g. mtp2,
eth_witoutfcs, sscf-nni ) or the name of the encapsulation protocol and
the “application” protocol over it separated by a colon (e.g sscop:sscf-nni,
sscop:alcap, sscop:nbap, …)
10.20. User DLTs protocol table
When a pcap file uses one of the user DLTs (147 to 162) wireshark uses this table to know which
protocol(s) to use for each user DLT.
This table is handled by an Section 10.7, “User Table” with the following fields.
DLT
One of the user dlts.
Payload protocol
This is the name of the payload protocol (the lowest layer in the packet
data). (e.g. “eth” for ethernet, “ip” for IPv4)
Header size
If there is a header protocol (before the payload protocol) this tells which
size this header is. A value of 0 disables the header protocol.
Header protocol
The name of the header protocol to be used (uses “data” as default).
Trailer size
If there is a trailer protocol (after the payload protocol) this tells which
size this trailer is. A value of 0 disables the trailer protocol.
Trailer protocol
The name of the trailer protocol to be used (uses “data” as default).
118
Appendix A. Wireshark Messages
Wireshark provides you with additional information generated out of the plain packet data or it may
need to indicate dissection problems. Messages generated by Wireshark are usually placed in square
brackets (“[]”).
A.1. Packet List Messages
These messages might appear in the packet list.
A.1.1. [Malformed Packet]
Malformed packet means that the protocol dissector can’t dissect the contents of the packet any further.
There can be various reasons:
• Wrong dissector: Wireshark erroneously has chosen the wrong protocol dissector for this packet.
This will happen e.g. if you are using a protocol not on its well known TCP or UDP port. You may
try Analyze|Decode As to circumvent this problem.
• Packet not reassembled: The packet is longer than a single frame and it is not reassembled, see
Section 7.6, “Packet Reassembly” for further details.
• Packet is malformed: The packet is actually wrong (malformed), meaning that a part of the packet
is just not as expected (not following the protocol specifications).
• Dissector is buggy: The corresponding protocol dissector is simply buggy or still incomplete.
Any of the above is possible. You’ll have to look into the specific situation to determine the reason.
You could disable the dissector by disabling the protocol on the Analyze menu and check how
Wireshark displays the packet then. You could (if it’s TCP) enable reassembly for TCP and the specific
dissector (if possible) in the Edit|Preferences menu. You could check the packet contents yourself by
reading the packet bytes and comparing it to the protocol specification. This could reveal a dissector
bug. Or you could find out that the packet is indeed wrong.
A.1.2. [Packet size limited during capture]
The packet size was limited during capture, see “Limit each packet to n bytes” at the Section 4.5, “The
“Capture Options” dialog box”. While dissecting, the current protocol dissector was simply running
out of packet bytes and had to give up. There’s nothing else you can do now, except to repeat the
whole capture process again with a higher (or no) packet size limitation.
A.2. Packet Details Messages
These messages might appear in the packet details.
A.2.1. [Response in frame: 123]
The current packet is the request of a detected request/response pair. You can directly jump to the
corresponding response packet just by double clicking on this message.
A.2.2. [Request in frame: 123]
Same as “Response in frame: 123” above, but the other way round.
119
Wireshark Messages
A.2.3. [Time from request: 0.123 seconds]
The time between the request and the response packets.
A.2.4. [Stream setup by PROTOCOL (frame 123)]
The session control protocol (SDP, H225, etc) message which signaled the creation of this session.
You can directly jump to the corresponding packet just by double clicking on this message.
120
Appendix B. Files and Folders
B.1. Capture Files
To understand which information will remain available after the captured packets are saved to a capture
file, it’s helpful to know a bit about the capture file contents.
Wireshark uses the pcapng file format as the default format to save captured packets. It is very flexible
but other tools may not support it.
Wireshark also supports the libpcap file format. This is a much simpler format and is well established.
However, it has some drawbacks: it’s not extensible and lacks some information that would be really
helpful (e.g. being able to add a comment to a packet such as “the problems start here” would be
really nice).
In addition to the libpcap format, Wireshark supports several different capture file formats. However,
the problems described above also applies for these formats.
B.1.1. Libpcap File Contents
At the start of each libpcap capture file some basic information is stored like a magic number to
identify the libpcap file format. The most interesting information of this file start is the link layer type
(Ethernet, 802.11, MPLS, etc).
The following data is saved for each packet:
• The timestamp with millisecond resolution
• The packet length as it was “on the wire”
• The packet length as it’s saved in the file
• The packet’s raw bytes
A detailed description of the libpcap file format can be found at: https://wiki.wireshark.org/
Development/LibpcapFileFormat
B.1.2. Not Saved in the Capture File
You should also know the things that are not saved in capture files:
• Current selections (selected packet, …)
• Name resolution information. See Section 7.7, “Name Resolution” for details
Pcapng files can optionally save name resolution information. Libpcap files can’t. Other file formats
have varying levels of support.
• The number of packets dropped while capturing
• Packet marks set with “Edit/Mark Packet”
• Time references set with “Edit/Time Reference”
• The current display filter
121
Files and Folders
B.2. Configuration Files and Folders
Wireshark uses a number of files and folders while it is running. Some of these reside in the personal
configuration folder and are used to maintain information between runs of Wireshark, while some of
them are maintained in system areas.
Tip
A list of the folders Wireshark actually uses can be found under the Folders tab in the
dialog box shown when you select About Wireshark from the Help menu.
The content format of the configuration files is the same on all platforms. However, to match the
different policies for Unix and Windows platforms, different folders are used for these files.
Table B.1. Configuration files and folders overview
File/Folder
Description
Unix/Linux folders
preferences
Settings from the
/etc/wireshark.conf,
Preferences dialog box. $HOME/.wireshark/
preferences
%WIRESHARK
%\wireshark.conf,
%APPDATA%
\Wireshark\preferences
recent
Recent GUI settings
(e.g. recent files lists).
$HOME/.wireshark/
recent
%APPDATA%
\Wireshark\recent
cfilters
Capture filters.
$HOME/.wireshark/
cfilters
%WIRESHARK%
\cfilters, %APPDATA
%\Wireshark\cfilters
dfilters
Display filters.
$HOME/.wireshark/
dfilters
%WIRESHARK%
\dfilters, %APPDATA
%\Wireshark\dfilters
colorfilters
Coloring rules.
$HOME/.wireshark/
colorfilters
%WIRESHARK
%\colorfilters,
%APPDATA%
\Wireshark\colorfilters
disabled_protos
Disabled protocols.
$HOME/.wireshark/
disabled_protos
%WIRESHARK%
\disabled_protos,
%APPDATA
%\Wireshark
\disabled_protos
ethers
Ethernet name
resolution.
/etc/ethers,
$HOME/.wireshark/
ethers
%WIRESHARK%
\ethers, %APPDATA%
\Wireshark\ethers
manuf
Ethernet name
resolution.
/etc/manuf,
$HOME/.wireshark/
manuf
%WIRESHARK%
\manuf, %APPDATA%
\Wireshark\manuf
hosts
IPv4 and IPv6 name
resolution.
/etc/hosts,
$HOME/.wireshark/
hosts
%WIRESHARK%
\hosts, %APPDATA%
\Wireshark\hosts
services
Network services.
/etc/services,
$HOME/.wireshark/
services
%WIRESHARK%
\services, %APPDATA
%\Wireshark\services
subnets
IPv4 subnet name
resolution.
/etc/subnets,
$HOME/.wireshark/
subnets
%WIRESHARK%
\subnets, %APPDATA
%\Wireshark\subnets
122
Windows folders
Files and Folders
File/Folder
Description
Unix/Linux folders
Windows folders
ipxnets
IPX name resolution.
/etc/ipxnets,
$HOME/.wireshark/
ipxnets
%WIRESHARK%
\ipxnets, %APPDATA
%\Wireshark\ipxnets
plugins
Plugin directories.
/usr/share/wireshark/
plugins, /usr/
local/share/
wireshark/plugins,
$HOME/.wireshark/
plugins
%WIRESHARK%
\plugins\<version>,
%APPDATA%
\Wireshark\plugins
temp
Temporary files.
Environment: TMPDIR Environment: TMPDIR
or TEMP
Windows folders
%APPDATA% points to the personal configuration folder, e.g.: C:\Documents and Settings
\<username>\Application Data (details can be found at: Section B.3.1, “Windows profiles”),
%WIRESHARK% points to the Wireshark program folder, e.g.: C:\Program Files\Wireshark
Unix/Linux folders
The /etc folder is the global Wireshark configuration folder. The folder actually used on your system
may vary, maybe something like: /usr/local/etc.
$HOME is usually something like: /home/<username>
File contents
preferences/wireshark.conf
This file contains your Wireshark preferences, including
defaults for capturing and displaying packets. It is a simple text
file containing statements of the form:
variable: value
The settings from this file are read in at program start
and written to disk when you press the Save button in the
“Preferences” dialog box.
recent
This file contains various GUI related settings like the main
window position and size, the recent files list and such. It is a
simple text file containing statements of the form:
variable: value
It is read at program start and written at program exit.
cfilters
This file contains all the capture filters that you have defined
and saved. It consists of one or more lines, where each line has
the following format:
"<filter name>" <filter string>
The settings from this file are read in at program start and
written to disk when you press the Save button in the “Capture
Filters” dialog box.
dfilters
This file contains all the display filters that you have defined
and saved. It consists of one or more lines, where each line has
the following format:
123
Files and Folders
"<filter name>" <filter string>
The settings from this file are read in at program start and
written to disk when you press the Save button in the “Display
Filters” dialog box.
colorfilters
This file contains all the color filters that you have defined and
saved. It consists of one or more lines, where each line has the
following format:
@<filter name>@<filter string>@[<bg RGB(16-bit)>][<fg RGB(16-bit)>]
The settings from this file are read in at program start and
written to disk when you press the Save button in the “Coloring
Rules” dialog box.
disabled_protos
Each line in this file specifies a disabled protocol name. The
following are some examples:
tcp
udp
The settings from this file are read in at program start and
written to disk when you press the Save button in the “Enabled
Protocols” dialog box.
ethers
When Wireshark is trying to translate Ethernet hardware
addresses to names, it consults the files listed in Table B.1,
“Configuration files and folders overview”. If an address is not
found in /etc/ethers, Wireshark looks in $HOME/.wireshark/
ethers
Each line in these files consists of one hardware address
and name separated by whitespace. The digits of hardware
addresses are separated by colons (:), dashes (-) or periods(.).
The following are some examples:
ff-ff-ff-ff-ff-ff
c0-00-ff-ff-ff-ff
00.2b.08.93.4b.a1
Broadcast
TR_broadcast
Freds_machine
The settings from this file are read in at program start and never
written by Wireshark.
manuf
Wireshark uses the files listed in Table B.1, “Configuration
files and folders overview” to translate the first three bytes of
an Ethernet address into a manufacturers name. This file has
the same format as the ethers file, except addresses are three
bytes long.
An example is:
00:00:01
Xerox
# XEROX CORPORATION
The settings from this file are read in at program start and never
written by Wireshark.
hosts
Wireshark uses the files listed in Table B.1, “Configuration
files and folders overview” to translate IPv4 and IPv6 addresses
into names.
This file has the same format as the usual /etc/hosts file on Unix
systems.
124
Files and Folders
An example is:
# Comments must be prepended by the # sign!
192.168.0.1 homeserver
The settings from this file are read in at program start and never
written by Wireshark.
services
Wireshark uses the files listed in Table B.1, “Configuration
files and folders overview” to translate port numbers into
names.
An example is:
mydns
mydns
5045/udp
5045/tcp
# My own Domain Name Server
# My own Domain Name Server
The settings from this file are read in at program start and never
written by Wireshark.
subnets
Wireshark uses the files listed in Table B.1, “Configuration
files and folders overview” to translate an IPv4 address into a
subnet name. If no exact match from the hosts file or from DNS
is found, Wireshark will attempt a partial match for the subnet
of the address.
Each line of this file consists of an IPv4 address, a subnet
mask length separated only by a / and a name separated by
whitespace. While the address must be a full IPv4 address, any
values beyond the mask length are subsequently ignored.
An example is:
# Comments must be prepended by the # sign!
192.168.0.0/24 ws_test_network
A partially matched name will be printed as “subnetname.remaining-address”. For example, “192.168.0.1” under
the subnet above would be printed as “ws_test_network.1"; if
the mask length above had been 16 rather than 24, the printed
address would be ``ws_test_network.0.1”.
The settings from this file are read in at program start and never
written by Wireshark.
ipxnets
Wireshark uses the files listed in Table B.1, “Configuration
files and folders overview” to translate IPX network numbers
into names.
An example is:
C0.A8.2C.00
c0-a8-1c-00
00:00:BE:EF
110f
HR
CEO
IT_Server1
FileServer3
The settings from this file are read in at program start and never
written by Wireshark.
plugins folder
Wireshark searches for plugins in the directories listed in
Table B.1, “Configuration files and folders overview”. They
are searched in the order listed.
125
Files and Folders
temp folder
If you start a new capture and don’t specify a filename for it,
Wireshark uses this directory to store that file; see Section 4.11,
“Capture files and file modes”.
B.2.1. Protocol help configuration
Wireshark can use configuration files to create context-sensitive menu items for protocol detail items
which will load help URLs in your web browser.
To create a protocol help file, create a folder named “protocol_help” in either the personal or global
configuration folders. Then create a text file with the extension “.ini” in the “protocol_help” folder.
The file must contain key-value pairs with the following sections:
[database]
[location data]
Mandatory. This contains initialization information for the help file. The
following keys must be defined:
source
Source name, e.g. “HyperGlobalMegaMart”
version
Must be “1”.
location
General URL for help items. Variables can be
substituted using the [location data] section below.
Optional. Contains keys that will be used for variable substitution in the
“location” value. For example, if the database section contains
location = http://www.example.com/proto?cookie=${cookie}&amp;path=${PATH}
then setting
cookie = anonymous-user-1138
will result in the URL PATH is used for help path substitution, and
shouldn’t be defined in this section.
[map]
Maps Wireshark protocol names to section names below. Each key MUST
match a valid protocol name such as “ip”. Each value MUST have a
matching section defined in the configuration file.
Each protocol section must contain an “_OVERVIEW” key which will be used as the first menu item
for the help source. Subsequent keys must match descriptions will be appended to the location.
Suppose the file C:\Users\sam.clemens\AppData\Roaming\Wireshark\protocol_help\wikipedia.ini
contains the following:
# Wikipedia (en) protocol help file.
# Help file initialization
# source: The source of the help information, e.g. ``Inacon'' or ``Wikipedia"
# version: Currently unused. Must be ``1''.
# url_template: Template for generated URLs. See ``URL Data'' below.
[database]
source=Wikipedia
version=1
url_template=https://${language}.wikipedia.org/wiki/${PATH}
# Substitution data for the location template.
# Each occurrence of the keys below in the location template will be
# substituted with their corresponding values. For example, ``${license}"
# in the URL template above will be replaced with the value of ``license"
# below.
#
# PATH is reserved for the help paths below; do not specify it here.
[location data]
language = en
126
Files and Folders
# Maps Wireshark protocol names to section names below. Each key MUST match
# a valid protocol name. Each value MUST have a matching section below.
[map]
tcp=TCP
# Mapped protocol sections.
# Keys must match protocol detail items descriptions.
[TCP]
_OVERVIEW=Transmission_Control_Protocol
Destination port=Transmission_Control_Protocol#TCP_ports
Source port=Transmission_Control_Protocol#TCP_ports
Right-clicking on a TCP protocol detail item will display a help menu item that displays the Wikipedia
page for TCP. Right-clicking on the TCP destination or source ports will display additional help menu
items that take you to the “TCP ports” section of the page.
example, the following configuration is functionally equivalent to the previous configuration:
[database]
source=Wikipedia
version=1
location=https://en.wikipedia.org/wiki/
[map]
tcp=TCP
[TCP]
_OVERVIEW=Transmission_Control_Protocol
Destination port=Transmission_Control_Protocol#TCP_ports
Source port=Transmission_Control_Protocol#TCP_ports
B.3. Windows folders
Here you will find some details about the folders used in Wireshark on different Windows versions.
As already mentioned, you can find the currently used folders in the About Wireshark dialog.
B.3.1. Windows profiles
Windows uses some special directories to store user configuration files which define the “user profile”.
This can be confusing, as the default directory location changed from Windows version to version and
might also be different for English and internationalized versions of Windows.
Note
If you’ve upgraded to a new Windows version, your profile might be kept in the former
location. The defaults mentioned here might not apply.
The following guides you to the right place where to look for Wireshark’s profile data.
Windows 8, Windows 7, Windows
Vista, and associated server
editions
C:\Users\<username>\AppData\Roaming\Wireshark
Windows XP and Windows Server
2003 1
C:\Documents and Settings\<username>\Application Data.
“Documents and Settings” and “Application Data” might be
internationalized.
Windows 2000 1
C:\Documents and Settings\<username>\Application Data.
“Documents and Settings” and “Application Data” might be
internationalized.
1
No longer supported by Wireshark. For historical reference only.
127
Files and Folders
Windows NT 4 1
C:\WINNT\Profiles\<username>\Application Data\Wireshark
Windows ME, Windows 98 with
user profiles 1
In Windows ME and 98 you could enable separate user profiles.
In that case, something like C:\windows\Profiles\<username>
\Application Data\Wireshark is used.
Windows ME, Windows 98
without user profiles 1
Without user profiles enabled the default location for all users
was C:\windows\Application Data\Wireshark
B.3.2. Windows roaming profiles
Some larger Windows environments use roaming profiles. If this is the case the configurations of all
programs you use won’t be saved on your local hard drive. They will be stored on the domain server
instead.
Your settings will travel with you from computer to computer with one exception. The “Local Settings”
folder in your profile data (typically something like: C:\Documents and Settings\<username>\Local
Settings) will not be transferred to the domain server. This is the default for temporary capture files.
B.3.3. Windows temporary folder
Wireshark uses the folder which is set by the TMPDIR or TEMP environment variable. This variable
will be set by the Windows installer.
Windows 8, Windows 7, Windows
Vista, and associated server
editions
C:\Users\<username>\AppData\Local\Temp
Windows XP, Windows Server
2003, Windows 2000 1
C:\Documents and Settings\<username>\Local Settings\Temp
Windows NT 1
C:\TEMP
128
Appendix C. Protocols and Protocol
Fields
Wireshark distinguishes between protocols (e.g. tcp) and protocol fields (e.g. tcp.port).
A comprehensive list of all protocols and protocol fields can be found in the “Display Filter Reference”
at https://www.wireshark.org/docs/dfref/
129
Appendix D. Related command line
tools
D.1. Introduction
Along with the main application, Wireshark comes with an array of command line tools which can
be helpful for specialized tasks. These tools will be described in this chapter. You can find more
information about each command in the Manual Pages.
D.2. tshark: Terminal-based Wireshark
TShark is a terminal oriented version of Wireshark designed for capturing and displaying packets when
an interactive user interface isn’t necessary or available. It supports the same options as wireshark.
For more information on tshark see the manual pages (man tshark).
Help information available from tshark.
TShark (Wireshark) 2.1.0 (v2.1.0rc0-502-g328fbc0 from master)
Dump and analyze network traffic.
See https://www.wireshark.org for more information.
Usage: tshark [options] ...
Capture interface:
-i <interface>
-f <capture filter>
-s <snaplen>
-p
-I
-B <buffer size>
-y <link type>
-D
-L
Capture stop conditions:
-c <packet count>
-a <autostop cond.> ...
name or idx of interface (def: first non-loopback)
packet filter in libpcap filter syntax
packet snapshot length (def: 65535)
don't capture in promiscuous mode
capture in monitor mode, if available
size of kernel buffer (def: 2MB)
link layer type (def: first appropriate)
print list of interfaces and exit
print list of link-layer types of iface and exit
stop after n
duration:NUM
filesize:NUM
files:NUM
packets (def: infinite)
- stop after NUM seconds
- stop this file after NUM KB
- stop after NUM files
Capture output:
-b <ringbuffer opt.> ... duration:NUM - switch to next file after
filesize:NUM - switch to next file after
files:NUM - ringbuffer: replace after
RPCAP options:
-A <user>:<password>
use RPCAP password authentication
Input file:
-r <infile>
set the filename to read from (- to read
Processing:
-2
-R <read filter>
-Y <display filter>
NUM secs
NUM KB
NUM files
from stdin)
perform a two-pass analysis
packet Read filter in Wireshark display filter syntax
packet displaY filter in Wireshark display filter
syntax
-n
disable all name resolutions (def: all enabled)
-N <name resolve flags> enable specific name resolution(s): "mnNtCd"
-d <layer_type>==<selector>,<decode_as_protocol> ...
"Decode As", see the man page for details
Example: tcp.port==8888,http
-H <hosts file>
read a list of entries from a hosts file, which will
then be written to a capture file. (Implies -W n)
--disable-protocol <proto_name>
disable dissection of proto_name
--enable-heuristic <short_name>
130
Related command line tools
enable dissection of heuristic protocol
--disable-heuristic <short_name>
disable dissection of heuristic protocol
Output:
-w <outfile|->
write packets to a pcap-format file named "outfile"
(or to the standard output for "-")
-C <config profile>
start with specified configuration profile
-F <output file type>
set the output file type, default is pcapng
an empty "-F" option will list the file types
-V
add output of packet tree
(Packet Details)
-O <protocols>
Only show packet details of these protocols, comma
separated
-P
print packet summary even when writing to a file
-S <separator>
the line separator to print between packets
-x
add output of hex and ASCII dump (Packet Bytes)
-T pdml|ps|psml|text|fields
format of text output (def: text)
-e <field>
field to print if -Tfields selected (e.g. tcp.port,
_ws.col.Info)
this option can be repeated to print multiple fields
-E<fieldsoption>=<value> set options for output when -Tfields selected:
header=y|n
switch headers on and off
separator=/t|/s|<char> select tab, space, printable character as separator
occurrence=f|l|a
print first, last or all occurrences of each field
aggregator=,|/s|<char> select comma, space, printable character as
aggregator
quote=d|s|n
select double, single, no quotes for values
-t a|ad|d|dd|e|r|u|ud
output format of time stamps (def: r: rel. to first)
-u s|hms
output format of seconds (def: s: seconds)
-l
flush standard output after each packet
-q
be more quiet on stdout (e.g. when using statistics)
-Q
only log true errors to stderr (quieter than -q)
-g
enable group read access on the output file(s)
-W n
Save extra information in the file, if supported.
n = write network address resolution information
-X <key>:<value>
eXtension options, see the man page for details
-z <statistics>
various statistics, see the man page for details
--capture-comment <comment>
add a capture comment to the newly created
output file (only for pcapng)
Miscellaneous:
-h
-v
-o <name>:<value> ...
-K <keytab>
-G [report]
display this help and exit
display version info and exit
override preference setting
keytab file to use for kerberos decryption
dump one of several available reports and exit
default report="fields"
use "-G ?" for more help
WARNING: dumpcap will enable kernel BPF JIT compiler if available.
You might want to reset it
By doing "echo 0 > /proc/sys/net/core/bpf_jit_enable"
D.3. tcpdump: Capturing with tcpdump for
viewing with Wireshark
It’s often more useful to capture packets using tcpdump rather than wireshark. For example, you
might want to do a remote capture and either don’t have GUI access or don’t have Wireshark installed
on the remote machine.
Older versions of tcpdump truncate packets to 68 or 96 bytes. If this is the case, use -s to capture
full-sized packets:
$ tcpdump -i <interface> -s 65535 -w <some-file>
You will have to specify the correct interface and the name of a file to save into. In addition, you will
have to terminate the capture with ^C when you believe you have captured enough packets.
131
Related command line tools
tcpdump is not part of the Wireshark distribution. You can get it from http://www.tcpdump.org or
as a standard package in most Linux distributions.
D.4. dumpcap: Capturing with dumpcap for
viewing with Wireshark
Dumpcap is a network traffic dump tool. It captures packet data from a live network and writes the
packets to a file. Dumpcap’s native capture file format is pcapng, which is also the format used by
Wireshark.
Without any options set it will use the pcap library to capture traffic from the first available network
interface and write the received raw packet data, along with the packets' time stamps into a pcapng
file. The capture filter syntax follows the rules of the pcap library.
Help information available from dumpcap.
Dumpcap (Wireshark) 2.1.0 (v2.1.0rc0-502-g328fbc0 from master)
Capture network packets and dump them into a pcapng or pcap file.
See https://www.wireshark.org for more information.
Usage: dumpcap [options] ...
Capture interface:
-i <interface>
-f
-s
-p
-I
-B
-y
-D
-L
-d
-k
-S
-M
<capture filter>
<snaplen>
<buffer size>
<link type>
RPCAP options:
-r
-u
-A <user>:<password>
-m <sampling type>
Stop conditions:
-c <packet count>
-a <autostop cond.> ...
name or idx of interface (def: first non-loopback),
or for remote capturing, use one of these formats:
rpcap://<host>/<interface>
TCP@<host>:<port>
packet filter in libpcap filter syntax
packet snapshot length (def: 65535)
don't capture in promiscuous mode
capture in monitor mode, if available
size of kernel buffer in MiB (def: 2MiB)
link layer type (def: first appropriate)
print list of interfaces and exit
print list of link-layer types of iface and exit
print generated BPF code for capture filter
set channel on wifi interface <freq>,[<type>]
print statistics for each interface once per second
for -D, -L, and -S, produce machine-readable output
don't ignore own RPCAP traffic in capture
use UDP for RPCAP data transfer
use RPCAP password authentication
use packet sampling
count:NUM - capture one packet of every NUM
timer:NUM - capture no more than 1 packet in NUM ms
stop after n
duration:NUM
filesize:NUM
files:NUM
packets (def: infinite)
- stop after NUM seconds
- stop this file after NUM KB
- stop after NUM files
Output (files):
-w <filename>
name of file to save (def: tempfile)
-g
enable group read access on the output file(s)
-b <ringbuffer opt.> ... duration:NUM - switch to next file after NUM secs
filesize:NUM - switch to next file after NUM KB
files:NUM - ringbuffer: replace after NUM files
-n
use pcapng format instead of pcap (default)
-P
use libpcap format instead of pcapng
--capture-comment <comment>
add a capture comment to the output file
(only for pcapng)
Miscellaneous:
-N <packet_limit>
-C <byte_limit>
maximum number of packets buffered within dumpcap
maximum number of bytes used for buffering packets
within dumpcap
132
Related command line tools
-t
-q
-v
-h
use a separate thread per interface
don't report packet capture counts
print version information and exit
display this help and exit
WARNING: dumpcap will enable kernel BPF JIT compiler if available.
You might want to reset it
By doing "echo 0 > /proc/sys/net/core/bpf_jit_enable"
Example: dumpcap -i eth0 -a duration:60 -w output.pcapng
"Capture packets from interface eth0 until 60s passed into output.pcapng"
Use Ctrl-C to stop capturing at any time.
D.5. capinfos: Print information about
capture files
capinfos can print information about binary capture files.
Help information available from capinfos.
Capinfos (Wireshark) 2.1.0 (v2.1.0rc0-502-g328fbc0 from master)
Print various information (infos) about capture files.
See https://www.wireshark.org for more information.
Usage: capinfos [options] <infile> ...
General infos:
-t display the capture file type
-E display the capture file encapsulation
-I display the capture file interface information
-F display additional capture file information
-H display the SHA1, RMD160, and MD5 hashes of the file
-k display the capture comment
Size
-c
-s
-d
-l
infos:
display
display
display
display
the
the
the
the
Time
-u
-a
-e
-o
-S
infos:
display
display
display
display
display
the capture duration (in seconds)
the capture start time
the capture end time
the capture file chronological status (True/False)
start and end times as seconds
number of packets
size of the file (in bytes)
total length of all packets (in bytes)
packet size limit (snapshot length)
Statistic infos:
-y display average
-i display average
-z display average
-x display average
data rate (in bytes/sec)
data rate (in bits/sec)
packet size (in bytes)
packet rate (in packets/sec)
Output format:
-L generate long report (default)
-T generate table report
-M display machine-readable values in long reports
Table report options:
-R generate header record (default)
-r do not generate header record
-B separate infos with TAB character (default)
-m separate infos with comma (,) character
-b separate infos with SPACE character
-N do not quote infos (default)
-q quote infos with single quotes (')
133
Related command line tools
-Q quote infos with double quotes (")
Miscellaneous:
-h display this help and exit
-C cancel processing if file open fails (default is to continue)
-A generate all infos (default)
Options are processed from left to right order with later options superceding
or adding to earlier options.
If no options are given the default is to display all infos in long report
output format.
D.6. rawshark: Dump and analyze network
traffic.
Rawshark reads a stream of packets from a file or pipe, and prints a line describing its output, followed
by a set of matching fields for each packet on stdout.
Help information available from rawshark.
Rawshark (Wireshark) 2.1.0 (v2.1.0rc0-502-g328fbc0 from master)
Dump and analyze network traffic.
See https://www.wireshark.org for more information.
Usage: rawshark [options] ...
Input file:
-r <infile>
set the pipe or file name to read from
Processing:
-d <encap:linktype>|<proto:protoname>
packet encapsulation or protocol
-F <field>
field to display
-n
disable all name resolution (def: all enabled)
-N <name resolve flags> enable specific name resolution(s): "mnNtCd"
-p
use the system's packet header format
(which may have 64-bit timestamps)
-R <read filter>
packet filter in Wireshark display filter syntax
-s
skip PCAP header on input
Output:
-l
-S
-t ad|a|r|d|dd|e
Miscellaneous:
-h
-o <name>:<value> ...
-v
flush output after each packet
format string for fields
(%D - name, %S - stringval, %N numval)
output format of time stamps (def: r: rel. to first)
display this help and exit
override preference setting
display version info and exit
D.7. editcap: Edit capture files
editcap is a general-purpose utility for modifying capture files. Its main function is to remove
packets from capture files, but it can also be used to convert capture files from one format to another,
as well as to print information about capture files.
Help information available from editcap.
Editcap (Wireshark) 2.1.0 (v2.1.0rc0-502-g328fbc0 from master)
Edit and/or translate the format of capture files.
See https://www.wireshark.org for more information.
Usage: editcap [options] ... <infile> <outfile> [ <packet#>[-<packet#>] ... ]
<infile> and <outfile> must both be present.
134
Related command line tools
A single packet or a range of packets can be selected.
Packet selection:
-r
-A <start time>
-B <stop time>
keep the selected packets; default is to delete them.
only output packets whose timestamp is after (or equal
to) the given time (format as YYYY-MM-DD hh:mm:ss).
only output packets whose timestamp is before the
given time (format as YYYY-MM-DD hh:mm:ss).
Duplicate packet removal:
-d
remove packet if duplicate (window == 5).
-D <dup window>
remove packet if duplicate; configurable <dup window>
Valid <dup window> values are 0 to 1000000.
NOTE: A <dup window> of 0 with -v (verbose option) is
useful to print MD5 hashes.
-w <dup time window>
remove packet if duplicate packet is found EQUAL TO OR
LESS THAN <dup time window> prior to current packet.
A <dup time window> is specified in relative seconds
(e.g. 0.000001).
-a <framenum>:<comment> Add or replace comment for given frame number
-I <bytes to ignore>
ignore the specified bytes at the beginning of
the frame during MD5 hash calculation
Useful to remove duplicated packets taken on
several routers(differents mac addresses for
example)
e.g. -I 26 in case of Ether/IP/ will ignore
ether(14) and IP header(20 - 4(src ip) - 4(dst ip)).
NOTE: The use of the 'Duplicate packet removal' options with
other editcap options except -v may not always work as expected.
Specifically the -r, -t or -S options will very likely NOT have the
desired effect if combined with the -d, -D or -w.
Packet manipulation:
-s <snaplen>
-C [offset:]<choplen>
-L
-t
-S
-E
-o
truncate each packet to max. <snaplen> bytes of data.
chop each packet by <choplen> bytes. Positive values
chop at the packet beginning, negative values at the
packet end. If an optional offset precedes the length,
then the bytes chopped will be offset from that value.
Positive offsets are from the packet beginning,
negative offsets are from the packet end. You can use
this option more than once, allowing up to 2 chopping
regions within a packet provided that at least 1
choplen is positive and at least 1 is negative.
adjust the frame (i.e. reported) length when chopping
and/or snapping
<time adjustment>
adjust the timestamp of each packet;
<time adjustment> is in relative seconds (e.g. -0.5).
<strict adjustment> adjust timestamp of packets if necessary to insure
strict chronological increasing order. The <strict
adjustment> is specified in relative seconds with
values of 0 or 0.000001 being the most reasonable.
A negative adjustment value will modify timestamps so
that each packet's delta time is the absolute value
of the adjustment specified. A value of -0 will set
all packets to the timestamp of the first packet.
<error probability> set the probability (between 0.0 and 1.0 incl.) that
a particular packet byte will be randomly changed.
<change offset>
When used in conjuction with -E, skip some bytes from the
beginning of the packet. This allows to preserve some
bytes, in order to have some headers untouched.
Output File(s):
-c <packets per file>
-i <seconds per file>
-F <capture type>
split the packet output to different files based on
uniform packet counts with a maximum of
<packets per file> each.
split the packet output to different files based on
uniform time intervals with a maximum of
<seconds per file> each.
set the output file type; default is pcapng. An empty
"-F" option will list the file types.
135
Related command line tools
-T <encap type>
Miscellaneous:
-h
-v
set the output file encapsulation type; default is the
same as the input file. An empty "-T" option will
list the encapsulation types.
display this help and exit.
verbose output.
If -v is used with any of the 'Duplicate Packet
Removal' options (-d, -D or -w) then Packet lengths
and MD5 hashes are printed to standard-error.
Capture file types available from editcap -F.
$ editcap -F
editcap: option requires an argument -- 'F'
editcap: The available capture file types for the "-F" flag are:
5views - InfoVista 5View capture
btsnoop - Symbian OS btsnoop
commview - TamoSoft CommView
dct2000 - Catapult DCT2000 trace (.out format)
erf - Endace ERF capture
eyesdn - EyeSDN USB S0/E1 ISDN trace format
k12text - K12 text file
lanalyzer - Novell LANalyzer
logcat - Android Logcat Binary format
logcat-brief - Android Logcat Brief text format
logcat-long - Android Logcat Long text format
logcat-process - Android Logcat Process text format
logcat-tag - Android Logcat Tag text format
logcat-thread - Android Logcat Thread text format
logcat-threadtime - Android Logcat Threadtime text format
logcat-time - Android Logcat Time text format
modlibpcap - Modified tcpdump - libpcap
netmon1 - Microsoft NetMon 1.x
netmon2 - Microsoft NetMon 2.x
nettl - HP-UX nettl trace
ngsniffer - Sniffer (DOS)
ngwsniffer_1_1 - NetXray, Sniffer (Windows) 1.1
ngwsniffer_2_0 - Sniffer (Windows) 2.00x
niobserver - Network Instruments Observer
nokialibpcap - Nokia tcpdump - libpcap
nseclibpcap - Wireshark - nanosecond libpcap
nstrace10 - NetScaler Trace (Version 1.0)
nstrace20 - NetScaler Trace (Version 2.0)
nstrace30 - NetScaler Trace (Version 3.0)
nstrace35 - NetScaler Trace (Version 3.5)
pcap - Wireshark/tcpdump/... - pcap
pcapng - Wireshark/... - pcapng
rf5 - Tektronix K12xx 32-bit .rf5 format
rh6_1libpcap - RedHat 6.1 tcpdump - libpcap
snoop - Sun snoop
suse6_3libpcap - SuSE 6.3 tcpdump - libpcap
visual - Visual Networks traffic capture
Encapsulation types available from editcap.
$ editcap -T
editcap: option requires an argument -- 'T'
editcap: The available encapsulation types for the "-T" flag are:
ap1394 - Apple IP-over-IEEE 1394
arcnet - ARCNET
arcnet_linux - Linux ARCNET
ascend - Lucent/Ascend access equipment
atm-pdus - ATM PDUs
atm-pdus-untruncated - ATM PDUs - untruncated
atm-rfc1483 - RFC 1483 ATM
ax25 - Amateur Radio AX.25
ax25-kiss - AX.25 with KISS header
bacnet-ms-tp - BACnet MS/TP
bacnet-ms-tp-with-direction - BACnet MS/TP with Directional Info
ber - ASN.1 Basic Encoding Rules
bluetooth-bredr-bb-rf - Bluetooth BR/EDR Baseband RF
bluetooth-h4 - Bluetooth H4
136
Related command line tools
bluetooth-h4-linux - Bluetooth H4 with linux header
bluetooth-hci - Bluetooth without transport layer
bluetooth-le-ll - Bluetooth Low Energy Link Layer
bluetooth-le-ll-rf - Bluetooth Low Energy Link Layer RF
bluetooth-linux-monitor - Bluetooth Linux Monitor
can20b - Controller Area Network 2.0B
chdlc - Cisco HDLC
chdlc-with-direction - Cisco HDLC with Directional Info
cosine - CoSine L2 debug log
dbus - D-Bus
dct2000 - Catapult DCT2000
docsis - Data Over Cable Service Interface Specification
dpnss_link - Digital Private Signalling System No 1 Link Layer
dvbci - DVB-CI (Common Interface)
enc - OpenBSD enc(4) encapsulating interface
epon - Ethernet Passive Optical Network
erf - Extensible Record Format
ether - Ethernet
ether-nettl - Ethernet with nettl headers
fc2 - Fibre Channel FC-2
fc2sof - Fibre Channel FC-2 With Frame Delimiter
fddi - FDDI
fddi-nettl - FDDI with nettl headers
fddi-swapped - FDDI with bit-swapped MAC addresses
flexray - FlexRay
frelay - Frame Relay
frelay-with-direction - Frame Relay with Directional Info
gcom-serial - GCOM Serial
gcom-tie1 - GCOM TIE1
gprs-llc - GPRS LLC
gsm_um - GSM Um Interface
hhdlc - HiPath HDLC
i2c - I2C
ieee-802-11 - IEEE 802.11 Wireless LAN
ieee-802-11-airopeek - IEEE 802.11 plus AiroPeek radio header
ieee-802-11-avs - IEEE 802.11 plus AVS radio header
ieee-802-11-netmon - IEEE 802.11 plus Network Monitor radio header
ieee-802-11-prism - IEEE 802.11 plus Prism II monitor mode radio header
ieee-802-11-radio - IEEE 802.11 Wireless LAN with radio information
ieee-802-11-radiotap - IEEE 802.11 plus radiotap radio header
ieee-802-16-mac-cps - IEEE 802.16 MAC Common Part Sublayer
infiniband - InfiniBand
ios - Cisco IOS internal
ip-over-fc - RFC 2625 IP-over-Fibre Channel
ip-over-ib - IP over Infiniband
ipfix - IPFIX
ipmb - Intelligent Platform Management Bus
ipmi-trace - IPMI Trace Data Collection
ipnet - Solaris IPNET
irda - IrDA
isdn - ISDN
ixveriwave - IxVeriWave header and stats block
jfif - JPEG/JFIF
json - JavaScript Object Notation
juniper-atm1 - Juniper ATM1
juniper-atm2 - Juniper ATM2
juniper-chdlc - Juniper C-HDLC
juniper-ether - Juniper Ethernet
juniper-frelay - Juniper Frame-Relay
juniper-ggsn - Juniper GGSN
juniper-mlfr - Juniper MLFR
juniper-mlppp - Juniper MLPPP
juniper-ppp - Juniper PPP
juniper-pppoe - Juniper PPPoE
juniper-svcs - Juniper Services
juniper-vp - Juniper Voice PIC
k12 - K12 protocol analyzer
lapb - LAPB
lapd - LAPD
layer1-event - EyeSDN Layer 1 event
lin - Local Interconnect Network
linux-atm-clip - Linux ATM CLIP
137
Related command line tools
linux-lapd - LAPD with Linux pseudo-header
linux-sll - Linux cooked-mode capture
logcat - Android Logcat Binary format
logcat_brief - Android Logcat Brief text format
logcat_long - Android Logcat Long text format
logcat_process - Android Logcat Process text format
logcat_tag - Android Logcat Tag text format
logcat_thread - Android Logcat Thread text format
logcat_threadtime - Android Logcat Threadtime text format
logcat_time - Android Logcat Time text format
loop - OpenBSD loopback
ltalk - Localtalk
mime - MIME
most - Media Oriented Systems Transport
mp2ts - ISO/IEC 13818-1 MPEG2-TS
mpeg - MPEG
mtp2 - SS7 MTP2
mtp2-with-phdr - MTP2 with pseudoheader
mtp3 - SS7 MTP3
mux27010 - MUX27010
netanalyzer - netANALYZER
netanalyzer-transparent - netANALYZER-Transparent
netlink - Linux Netlink
nfc-llcp - NFC LLCP
nflog - NFLOG
nstrace10 - NetScaler Encapsulation 1.0 of Ethernet
nstrace20 - NetScaler Encapsulation 2.0 of Ethernet
nstrace30 - NetScaler Encapsulation 3.0 of Ethernet
nstrace35 - NetScaler Encapsulation 3.5 of Ethernet
null - NULL/Loopback
packetlogger - PacketLogger
pflog - OpenBSD PF Firewall logs
pflog-old - OpenBSD PF Firewall logs, pre-3.4
pktap - Apple PKTAP
ppi - Per-Packet Information header
ppp - PPP
ppp-with-direction - PPP with Directional Info
pppoes - PPP-over-Ethernet session
raw-icmp-nettl - Raw ICMP with nettl headers
raw-icmpv6-nettl - Raw ICMPv6 with nettl headers
raw-telnet-nettl - Raw telnet with nettl headers
rawip - Raw IP
rawip-nettl - Raw IP with nettl headers
rawip4 - Raw IPv4
rawip6 - Raw IPv6
redback - Redback SmartEdge
rtac-serial - RTAC serial-line
s4607 - STANAG 4607
s5066-dpdu - STANAG 5066 Data Transfer Sublayer PDUs(D_PDU)
sccp - SS7 SCCP
sctp - SCTP
sdh - SDH
sdlc - SDLC
sita-wan - SITA WAN packets
slip - SLIP
socketcan - SocketCAN
symantec - Symantec Enterprise Firewall
tnef - Transport-Neutral Encapsulation Format
tr - Token Ring
tr-nettl - Token Ring with nettl headers
tzsp - Tazmen sniffer protocol
unknown - Unknown
unknown-nettl - Unknown link-layer type with nettl headers
usb - Raw USB packets
usb-linux - USB packets with Linux header
usb-linux-mmap - USB packets with Linux header and padding
usb-usbpcap - USB packets with USBPcap header
user0 - USER 0
user1 - USER 1
user2 - USER 2
user3 - USER 3
user4 - USER 4
138
Related command line tools
user5 - USER 5
user6 - USER 6
user7 - USER 7
user8 - USER 8
user9 - USER 9
user10 - USER 10
user11 - USER 11
user12 - USER 12
user13 - USER 13
user14 - USER 14
user15 - USER 15
v5-ef - V5 Envelope Function
whdlc - Wellfleet HDLC
wireshark-upper-pdu - Wireshark Upper PDU export
wpan - IEEE 802.15.4 Wireless PAN
wpan-nofcs - IEEE 802.15.4 Wireless PAN with FCS not present
wpan-nonask-phy - IEEE 802.15.4 Wireless PAN non-ASK PHY
x2e-serial - X2E serial line capture
x2e-xoraya - X2E Xoraya
x25-nettl - X.25 with nettl headers
D.8. mergecap: Merging multiple capture files
into one
Mergecap is a program that combines multiple saved capture files into a single output file specified by
the -w argument. Mergecap knows how to read libpcap capture files, including those of tcpdump. In
addition, Mergecap can read capture files from snoop (including Shomiti) and atmsnoop, LanAlyzer,
Sniffer (compressed or uncompressed), Microsoft Network Monitor, AIX’s iptrace, NetXray, Sniffer
Pro, RADCOM’s WAN/LAN analyzer, Lucent/Ascend router debug output, HP-UX’s nettl, and the
dump output from Toshiba’s ISDN routers. There is no need to tell Mergecap what type of file you
are reading; it will determine the file type by itself. Mergecap is also capable of reading any of these
file formats if they are compressed using gzip. Mergecap recognizes this directly from the file; the
“.gz” extension is not required for this purpose.
By default, it writes the capture file in pcapng format, and writes all of the packets in the input capture
files to the output file. The -F flag can be used to specify the format in which to write the capture file; it
can write the file in libpcap format (standard libpcap format, a modified format used by some patched
versions of libpcap, the format used by Red Hat Linux 6.1, or the format used by SuSE Linux 6.3),
snoop format, uncompressed Sniffer format, Microsoft Network Monitor 1.x format, and the format
used by Windows-based versions of the Sniffer software.
Packets from the input files are merged in chronological order based on each frame’s timestamp, unless
the -a flag is specified. Mergecap assumes that frames within a single capture file are already stored
in chronological order. When the -a flag is specified, packets are copied directly from each input file
to the output file, independent of each frame’s timestamp.
If the -s flag is used to specify a snapshot length, frames in the input file with more captured data
than the specified snapshot length will have only the amount of data specified by the snapshot length
written to the output file. This may be useful if the program that is to read the output file cannot handle
packets larger than a certain size (for example, the versions of snoop in Solaris 2.5.1 and Solaris 2.6
appear to reject Ethernet frames larger than the standard Ethernet MTU, making them incapable of
handling gigabit Ethernet captures if jumbo frames were used).
If the -T flag is used to specify an encapsulation type, the encapsulation type of the output capture file
will be forced to the specified type, rather than being the type appropriate to the encapsulation type of
the input capture file. Note that this merely forces the encapsulation type of the output file to be the
specified type; the packet headers of the packets will not be translated from the encapsulation type of
the input capture file to the specified encapsulation type (for example, it will not translate an Ethernet
capture to an FDDI capture if an Ethernet capture is read and -T fddi is specified).
Help information available from mergecap.
139
Related command line tools
Mergecap (Wireshark) 2.1.0 (v2.1.0rc0-502-g328fbc0 from master)
Merge two or more capture files into one.
See https://www.wireshark.org for more information.
Usage: mergecap [options] -w <outfile>|- <infile> [<infile> ...]
Output:
-a
-s
-w
-F
-I
concatenate rather than merge files.
default is to merge based on frame timestamps.
<snaplen>
truncate packets to <snaplen> bytes of data.
<outfile>|set the output filename to <outfile> or '-' for stdout.
<capture type> set the output file type; default is pcapng.
an empty "-F" option will list the file types.
<IDB merge mode> set the merge mode for Interface Description Blocks; default is 'all'.
an empty "-I" option will list the merge modes.
Miscellaneous:
-h
-v
display this help and exit.
verbose output.
A simple example merging dhcp-capture.pcapng
outfile.pcapng is shown below.
and
imap-1.pcapng
into
Simple example of using mergecap.
$ mergecap -w outfile.pcapng dhcp-capture.pcapng imap-1.pcapng
D.9. text2pcap: Converting ASCII hexdumps
to network captures
There may be some occasions when you wish to convert a hex dump of some network traffic into a
libpcap file.
text2pcap is a program that reads in an ASCII hex dump and writes the data described into a
libpcap-style capture file. text2pcap can read hexdumps with multiple packets in them, and build a
capture file of multiple packets. text2pcap is also capable of generating dummy Ethernet, IP and
UDP headers, in order to build fully processable packet dumps from hexdumps of application-level
data only.
text2pcap understands a hexdump of the form generated by od -A x -t x1. In other words, each
byte is individually displayed and surrounded with a space. Each line begins with an offset describing
the position in the file. The offset is a hex number (can also be octal - see -o), of more than two hex
digits. Here is a sample dump that text2pcap can recognize:
000000
000008
000010
000018
000020
000028
000030
00
5a
03
ee
03
16
01
e0
a0
68
33
80
a2
01
1e
b9
00
0f
94
0a
0f
a7
12
00
19
04
00
19
05
08
00
08
00
03
03
6f
00
00
7f
00
50
80
00
46
0a
0f
10
00
11
10
00
2e
19
01
0c
01
........
........
........
........
........
........
........
There is no limit on the width or number of bytes per line. Also the text dump at the end of the line
is ignored. Bytes/hex numbers can be uppercase or lowercase. Any text before the offset is ignored,
including email forwarding characters ‘>’. Any lines of text between the bytestring lines is ignored.
The offsets are used to track the bytes, so offsets must be correct. Any line which has only bytes
without a leading offset is ignored. An offset is recognized as being a hex number longer than two
characters. Any text after the bytes is ignored (e.g. the character dump). Any hex numbers in this text
are also ignored. An offset of zero is indicative of starting a new packet, so a single text file with a
series of hexdumps can be converted into a packet capture with multiple packets. Multiple packets are
read in with timestamps differing by one second each. In general, short of these restrictions, text2pcap
is pretty liberal about reading in hexdumps and has been tested with a variety of mangled outputs
(including being forwarded through email multiple times, with limited line wrap etc.)
140
Related command line tools
There are a couple of other special features to note. Any line where the first non-whitespace character
is # will be ignored as a comment. Any line beginning with #TEXT2PCAP is a directive and options
can be inserted after this command to be processed by text2pcap. Currently there are no directives
implemented; in the future, these may be used to give more fine grained control on the dump and the
way it should be processed e.g. timestamps, encapsulation type etc.
text2pcap also allows the user to read in dumps of application-level data, by inserting dummy
L2, L3 and L4 headers before each packet. Possibilities include inserting headers such as Ethernet,
Ethernet + IP, Ethernet + IP + UDP, or Ethernet + Ip + TCP before each packet. This allows Wireshark
or any other full-packet decoder to handle these dumps.
Help information available from text2pcap.
Text2pcap (Wireshark) 2.1.0 (v2.1.0rc0-502-g328fbc0 from master)
Generate a capture file from an ASCII hexdump of packets.
See https://www.wireshark.org for more information.
Usage: text2pcap [options] <infile> <outfile>
where
<infile> specifies input filename (use - for standard input)
<outfile> specifies output filename (use - for standard output)
Input:
-o hex|oct|dec
-t <timefmt>
-D
-a
Output:
-l <typenum>
-m <max-packet>
Prepend dummy header:
-e <l3pid>
-i <proto>
-4 <srcip>,<destip>
-6 <srcip>,<destip>
-u <srcp>,<destp>
parse offsets as (h)ex, (o)ctal or (d)ecimal;
default is hex.
treat the text before the packet as a date/time code;
the specified argument is a format string of the sort
supported by strptime.
Example: The time "10:15:14.5476" has the format code
"%H:%M:%S."
NOTE: The subsecond component delimiter, '.', must be
given, but no pattern is required; the remaining
number is assumed to be fractions of a second.
NOTE: Date/time fields from the current date/time are
used as the default for unspecified fields.
the text before the packet starts with an I or an O,
indicating that the packet is inbound or outbound.
This is only stored if the output format is PCAP-NG.
enable ASCII text dump identification.
The start of the ASCII text dump can be identified
and excluded from the packet data, even if it looks
like a HEX dump.
NOTE: Do not enable it if the input file does not
contain the ASCII text dump.
link-layer type number; default is 1 (Ethernet). See
http://www.tcpdump.org/linktypes.html for a list of
numbers. Use this option if your dump is a complete
hex dump of an encapsulated packet and you wish to
specify the exact type of encapsulation.
Example: -l 7 for ARCNet packets.
max packet length in output; default is 65535
prepend dummy Ethernet II header with specified L3PID
(in HEX).
Example: -e 0x806 to specify an ARP packet.
prepend dummy IP header with specified IP protocol
(in DECIMAL).
Automatically prepends Ethernet header as well.
Example: -i 46
prepend dummy IPv4 header with specified
dest and source address.
Example: -4 10.0.0.1,10.0.0.2
replace IPv6 header with specified
dest and source address.
Example: -6 fe80:0:0:0:202:b3ff:fe1e:8329,2001:0db8:85a3:0000:0000:8a2e:037
prepend dummy UDP header with specified
source and destination ports (in DECIMAL).
141
Related command line tools
Automatically prepends Ethernet & IP headers as well.
Example: -u 1000,69 to make the packets look like
TFTP/UDP packets.
-T <srcp>,<destp>
prepend dummy TCP header with specified
source and destination ports (in DECIMAL).
Automatically prepends Ethernet & IP headers as well.
Example: -T 50,60
-s <srcp>,<dstp>,<tag> prepend dummy SCTP header with specified
source/dest ports and verification tag (in DECIMAL).
Automatically prepends Ethernet & IP headers as well.
Example: -s 30,40,34
-S <srcp>,<dstp>,<ppi> prepend dummy SCTP header with specified
source/dest ports and verification tag 0.
Automatically prepends a dummy SCTP DATA
chunk header with payload protocol identifier ppi.
Example: -S 30,40,34
Miscellaneous:
-h
-d
-q
-n
display this help and exit.
show detailed debug of parser states.
generate no output at all (automatically disables -d).
use PCAP-NG instead of PCAP as output format.
D.10. reordercap: Reorder a capture file
reordercap lets you reorder a capture file according to the packets timestamp.
Help information available from reordercap.
Reordercap (Wireshark) 2.1.0 (v2.1.0rc0-502-g328fbc0 from master)
Reorder timestamps of input file frames into output file.
See https://www.wireshark.org for more information.
Usage: reordercap [options] <infile> <outfile>
Options:
-n
-h
don't write to output file if the input file is ordered.
display this help and exit.
142
Chapter 11. This Document’s License
(GPL)
As with the original license and documentation distributed with Wireshark, this document is covered
by the GNU General Public License (GNU GPL).
If you haven’t read the GPL before, please do so. It explains all the things that you are allowed to do
with this code and documentation.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free
51 Franklin Street, Fifth
Everyone is permitted to copy
of this license document, but
Software Foundation, Inc.
Floor, Boston, MA 02110-1301 USA
and distribute verbatim copies
changing it is not allowed.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their
rights.
We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
GNU GENERAL PUBLIC LICENSE
143
This Document’s License (GPL)
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The "Program", below,
refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another
language. (Hereinafter, translation is included without limitation in
the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b) You must cause any work that
whole or in part contains or is
part thereof, to be licensed as
parties under the terms of this
you distribute or publish, that in
derived from the Program or any
a whole at no charge to all third
License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide
a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.
In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under
144
This Document’s License (GPL)
the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer
to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such
an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to
control compilation and installation of the executable. However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
145
This Document’s License (GPL)
may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the Program
specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
146
This Document’s License (GPL)
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the
to attach them to the start of each source file
convey the exclusion of warranty; and each file
the "copyright" line and a pointer to where the
program. It is safest
to most effectively
should have at least
full notice is found.
&lt;one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, the commands you use may
be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.
&lt;signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library. If this is what you want to do, use the GNU Library General
Public License instead of this License.
147
Open as PDF
Similar pages