Yealink SIP IP Phones Release Note of Version 70

YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
Yealink SIP IP Phones Release Note of Version 70
·Firmware Version:From x.61.0.80Tox.70.0.80
·Applicable Models:SIP- T20/T22/T26/T28
·Release Date:November24th, 2012
Yealink SIP Phones’ Firmware Change Log
1/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
1. New features
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Added new mechanism ofAuto Provisioning feature.
Added automatic BLF list configuration feature on DSS key.
Added one sharedline account supports multiple calls feature.
Added Call Pickup soft key feature.
Added “Visual Alert for BLF Pickup” and “Audio Alert for BLF Pickup”configuration.
Added the prompt interface for “Action URI” feature.
Supported to show the hardware version and firmware version of the EHS and EXP device in
the Status page.
Added“Play local DTMF Tone” configuration.
Added “DHCP Active” configuration.
Added“HeadSet Key In Talk” configuration
Added “Phone Unlock PIN” on LCD.
Added Mac address info to User-Agent header on SIP message.
Yealink SIP Phones’ Firmware Change Log
2/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
2. Optimization
1. Supported to enter the Voicemail box by pressing the Message button when then Menu key is
locked.
2. Added the “Transfer Mode via Dsskey” configuration.
3. Classified the configurations in the PhoneFeatures web setting page.
4. Supported DND & FWD separated feature.
5. Optimized keypad lock feature.
6. Supported TAP mode of OpenVPN.
7. Added the OpenVPN feature toT20/T22 models.
8. Modified ATS conference feature to be Optional.
9. Modified Draft BLA feature to be Optional.
10. Added PEAP-MSCHAPV2 authentication for 802.1X feature.
11. Added EAP-TLSauthentication for 802.1X feature.
12. Added domain name supported for PushXML server address.
13. Optimized “Logo + characterHD ”icon display in the LCD of T28/T26 when calling with
codec G722.
14. Did optimization of dealing with BLF Notify message which is out of dialog.
15. Did optimization of ringtone.
16. Default Input Method of the Broadsoft network phonebook.
17. Added some fieldsto the snmp section.
18. Added the feature that the phone can use the SNMP to reboot the phone.
19. Added the dual-headset function.
20. Added new parameters to Action URL feature.
21. Added “Voice Mail Tone “configuration.
22. Optimized XML browse.
23. Added “Allow IP Call “configuration.
24. Did optimization that the phone can disable the local DTMF tone.
25. Did optimization that the phone can support 99 entries for Dial-now Rule.
26. Did optimization of the LDAP search interface, show the default IME when enter this
interface and the IME can be configured.
27. Did optimization of DHCP, supported to get NTP server address through Option 42.
Yealink SIP Phones’ Firmware Change Log
3/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
3. Bug Fixes
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
Fixed the issue that after the other party answers the incoming call, the phone still ring the
ringback tone.
Fixed the issue that the phone can’t make or answer calls normally because of the phone
can’t obtain the right IP address from the SIP INVITE header.
Fixed the issue that the phone will prompt “No data to import “when import the *.csv file
which exported from the Outlook.
Fixed the issue that the phone will have noise /short interruption every 60s during the voice
talking.
Fixed the issue when Attended Transfer, the phone cancel the call immediately after press OK,
the third party will ring, but it can’t create the connection after answer the call.
Fixed the issue that the account registration will time out when T28/T26 connected to the
open VPN.
Fixed the issue T28/T26/T22 can’t accomplish the Push XML feature when use the
TextScreen.php file.
Fixed the issue about the Asterisk server: When redial, the phone can’t make calls to the
account which including the server IP.
Fixed the issue when use the STUN feature, the phone always registers
with its private IP instead of public WAN IP of Router, which causes no-audio issue.
Fixed the issue that VOP(soft phone base on sip presence) can’t be compatible with
RFC4235.
Fixed the issue that when A press Transfer +C number +Transfer, on the LCD of the A, it will
show Resume.
Fixed the issue that can’t hear the local ring back tone when change from speaker to handset.
Fixed the issue that the configure file which the phone received from the auto provision
server will be damaged when SSL is activated
Fixed the issue that when you do some operation, the phone will have slow response to it.
Fixed the issue that the number can’t be included the underline symbol “_”when added the
contacts from the web UI.
Fixed the issue that the LDAP can’t search the right result.
Fixed the issue that the Broadsoft network phonebook can’t be compatible with the enterprise
contacts phonebook.
Fixed the issue that the phone will exit from the dial interface if the phone exit from the pool.
Fixed the issue that the phone can’t send the URL which contains the username and
password.
Fixed the BLF can’t work normally after reboot issue.
Fixed the issue that the LED of PLANTRONIC CS60 wireless headset can’t turn off when
the phone hangs up the call.
Fixed the issue when the caller cancels the calling, the called party still ringing.
Fixed the issue that the phone will not auto answer the call even though it receives the
Answer-After=0 message.
Fixed no voice issue when using Multicast IP paging feature.
Fixed the issue that the phone can’t support multicast in VLAN.
Yealink SIP Phones’ Firmware Change Log
4/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
52.
53.
54.
Fixed the issue that attended transfer failed in a special server.
Fixed the issue that the BLF light doesn’t turn on after reboot.
Fixed the issue that it can’t create a new call in the Broadsoft call manager.
Fixed the issue that when change SIP port, it is ok to make a call but failed in sending a
message.
Fixed the issue that it will answer automatically when the second call is an Intercom call
when use TR069 feature.
Fixed the issue that turn error when change the network type of PC port from ‘as bridge’ to’
as router’.
Fixed the register failed issue when register to a public server.
Fixed the issue that when locked all the keys, it can’t be unlock when there
‘s new voice mail .
Fixed the issue that after set several BLF DSS Keys, the phone will response very slowly.
Fixed the issue that when the language of the phone web interface is Russian, the DSS Key
interface is garbled.
Fixed the issue that when the language of the phone web interface is English, the
Phone-Featuresinterface is garbled
Fixed the issue that when disable the Button Sound, there is no dial tone when pick up the
handset.
Fixed the issue that incoming call can be seen from LCD but without ring tone, also no audio
when answered the call.
Fixed the issue that in the Broadsoft PBX, when making a call with speaker, there is no more
ring back tone after the first ring back tone.
Fixed the issue that when button sound set to disable, A call B with speaker, but there’s no
ring back tone when change from speaker to handset.
Fixed the issue that when search in remote phonebook, phone didn’t deal with input
characters with urlencode before sending URL.
Fixed the issue that can’t use the X button to hang up a call.
Fixed the issue that can’t reply correctly to the refer message.
Fixed the issue that DNS_SRV can’t register with TLS but with UDP instead.
Fixed the issue that can’t register with TLS after 2~3 minutes of reboot.
Fixed the issue that register failed with TLS.
Fixed the issue that after registered and first subscribe successfully, after subscribe expire
time, the phone will not refresh the subscribe message.
Fixed the issue that the BLF light status is not correct when the call is transferred or held.
Fixed the issue that the phone didn’t use default ringtone when there’s no custom ringtone or
selected ringtone.
Fixed the issue that it will subscribe repeated when using BLF list function.
Fixed the issue that the phone can’t use the authentication information in refer message.
Fixed the issue that can’t cancel the subscribe message for BLF.
Fixed the issue that there is no subscribe message reply after received the 481 message send
from the server.
Fixed the issue that in UCAP platform, the phone doesn’t reply the corresponding subscribe
message after receiving the subscribe authentication information from the UCAP.
Yealink SIP Phones’ Firmware Change Log
5/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
55. Fixed the issue that when using the distinctive ringtone, it will crash and reboot automatically
after download the custom ringtone failed.
56. Fixed the issue that the refer message is the same between semi-attended transfer and the
busy forward.
57. Fixed the issue that the conference function is not available when using a soft phone in PC.
58. Fixed the issue that when using IPv6 address, the phone will not process the
183 Session description message when call mobile phone, and when a call comes in (IPv6
call IPv6), the phone will always send 486 a message to the server.
59. Fixed the issue that phone will sometimes register failed.
60. Fixed the issue that the phone will reboot after search the WINDOW AD LDAP phonebook
for several times.
61. Fixed the issue that the phone will response very slowly and even crashed when using LDAP
phonebook.
62. Fixed the issue that when A is talking with B with speaker and then C calls A, at this time, a
serious echo will be heard on B side.
63. Fixed the issue that when answer to the second call, the phone will answer second call first
and then hold the previous call.
64. Fixed the issue that the mechanism changed when received a reboot message from Broadsoft.
65. Fixed the issue that it will dial out name but not the correct number when press the BLF list
button.
66. Fixed the issue that when registered with TLS and set the DSS Key as BLF list, after that the
DSS Key can’t dial out.
67. Fixed the issue that it becomes mute automatically when answer a call, and then shows busy
when dialing out a second call.
68. Fixed the transfer failed issue on Broadsoft Call Manager.
69. Fixed the issue that it cannot import the contact groups when import contacts with CSV
format.
70. Fixed the issue that the phone can’t compatible with "88.lb4.keyyo.net" format in Outbound
server address.
71. Fixed the issue that when use DNS SRV in the Avaya SCS server, it will sometimes shows
“NO SERVICE” on the LCD.
72. Fixed the issue that when using 3CX 10 server, the local extension can work normally, but
the remote extension can’t work normally.
73. Fixed the issue that it will reply a 200 ok message when REINVITE failed.
74. Fixed the issue that it will auto provision failed when there is a sipAccount.cfg exists.
75. Fixed the unhold failed issue in the Mitel serve.
76. Fixed the unable to get IP from the network issue.
77. Fixed the issue that the BLF works not stable, it works fine sometimes but sometimes doesn’t
work.
78. Fixed the issue that the phone will stop sending Keep Alive message when using DNS-SRV
feature.
79. Fixed the LDAP search failed issue.
80. Fixed the issue that the phone received the wrong Via header of invite message from some
server, which cause replying to the wrong address.
Yealink SIP Phones’ Firmware Change Log
6/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
81. Fixed the issue that the BLF light sometimes can’t turn on after phone reboot.
82. Fixed the issue that the phone send the incorrect ACK(sdp) message which cause the
one-way audio call.
83. Fixed the issue that it can’t show the caller ID after pick up.
84. Fixed the issue that the BLF light can’t turn on in EP39.
85. Fixed the issue that BLF LIST can’t show the name and the light state can’t change.
86. Fixed the transfer fail issue.
87. Fixed the issue that the auto provision can only success at the first time.
88. Fixed the issue that the phone response slowly after connected with an EXP38.
89. Fixed the LDAP display unusually issue.
90. Fixed the upload certification failed issue.
91. Fixed the issue that the default ring tone is common ringtone, and it can’t be changed to
others.
92. Fixed the issue that it will hang up automatically after hold a call for 2
minutes.
93. Fixed the issue that it will response very slowly after a moment and
94. Fixed the issue that it will register fail after reboot on the HUAWEI SX3000 server.
95. Fixed the issue that make a call in the soft phone CTI, and there is no music ringtone and not
available notify message.
96. Fixed the delay issue of LCD display when dialing.
97. Fixed the issue that it can’t work when Action URL is using HTTPS.
98. Fixed the issue that A call B, before B answer, B forward the call to C,B can’t hear the
ringback of C.
99. Fixed the issue that when doing attended transfer, press ok and then hang up fastly, the third
party can ring but when it pick up the phone ,it can’t set up the connection.
100. Fixed the issue that the Broadsoftserver can’t recognize the autoprovision parameter ‘+’.
101. Fixed the issue that there will be mixed noise/short interruption every 60 second during the
voice call.
102. Fixed the ICMP issue.
103. Fixed the issue that when login in ACD and input the wrong user name and password, it can’t
popup the error message.
104. Fixed the issue that under the UC system, it will hang up automatically after the first ring.
105. Fixed the issue that when IP PBX SIP-INVITE contained the message of AUTOANSWER,
the SPEAKER and HEADSET can’t ring at the same time.
106. Fixed the issue that it will not send the Invite message if DND on code and off code are set as
the same.
107. Fixed the issue that when the host of the conference hang up, then the other two parties can’t
go on the conference.
108. Fixed the issue that when press redial button to redial a number which needed prefixed digit,
it will not add prefixed digit automatically.
109. Fixed the issue that DND/Forward can’t be synchronization with Huawei server.
110. Fixed the issue that A call B, B transfer the call to C, at this time, there are two incoming
calls on C.
111. Fixed the issue that Chile daylight-saving time is incorrect.
Yealink SIP Phones’ Firmware Change Log
7/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
112. Fixed the issue that it can’t hang up an incoming call with the handset.
113. Fixed the issue that SCA is set on line key, the phone will not display the icon of line key
when synchronization.
114. Fixed the issue that transplant the last RPS firmware to the customer specific version.
115. Fixed the issue that it can’t answer the call when pick up the handset very fast after the first
ring.
116. Fixed the issue that it can’t answer the calls successfully using the Active URI feature.
117. Fixed the issue that it can’t register the account which contain space through auto provision.
118. Fixed the issue that the supported password digits are too short.
119. Fixed the issue that when using BLF, if several calls come to the monitored number, the BLF
light status is not correct.
120. Fixed the issue that it can’t return to the idle interface after the semi-attended transfer.
121. Fixed the issue that when press Reject, the phone will send the BYE message first and then
the 486 message.
122. Fixed the issue that the phone gets the incorrect value of option43 when refresh DHCP.
123. Fixed the issue that it will response a 486 message to hang up a call when received an invite
message with replace information.
124. Fixed the no audio issue after pick up the call.
125. Fixed the issue that it can’t adjust the volume to mute.
126. Fixed the issue that it can’t support the value of outbound server address which started with a
digit.
127. Fixed the issue that there is no audio during a call in the Aastra MX-ONE Telephony Server
128. Fixed the issue that the password and AES key can be seen in the syslog when doing auto
provision.
129. Fixed the issue that if the phone filled AES key, the phone still download file without
encryption from auto provision server.
130. Fixed the issue that the phone can’t support the ‘alert-info: info=alert-autoanswer’ header.
131. Fixed the issue that the phone can’t refresh the LCD display according to the SIP INFO.
132. Fixed the issue that when enable call waiting tone, there is a second call during a call, the
volume will increase instantly.
133. Fixed the issue that when the Intercom Barge is set to disable, during a normal call, when
there is an intercom call coming, the normal call will be held, and response to the intercom
call.
134. Fixed the issue that when the phone started for a while, it will stop to send the UDP keep
alive message to the server which will make the incoming call unavailable.
135. Fixed the issue that when delete all the accounts in the BLF list, and phone received the
message from the server, the BLF list in the webpage will not disappear.
136. Fixed the issue that when reset the auto provision password, the new password will not take
effect, but the admin password is OK.
137. Fixed the issue that the when ALLKEY is locked, if there is a voicemail, there is no MENU
key so that it can’t unlock the keys.
138. Fixed the issue that when a phone start a conference, and the host hang up, then another party
will also hang up, just the last party still on the call.
139. Fixed the issue that it can’t lock the Headset button during a call.
Yealink SIP Phones’ Firmware Change Log
8/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
140. Fixed the issue that if enable the RFC2543 Hold, when held, the call will send a recvonl
which contain the IP 0.0.0.0, and this will cause the server can’t send the held music to the
phone.
141. Fixed the issue that when mute during a call, it will also hear the DTMF tone behind the
caller on the other side of the call.
142. Fixed the issue that the phone import the VPN certificate which needed a password, then the
phone will stay in the ‘Initializing, Please Wait’ interface when rebooted.
143. Fixed the issue that the phone incorrect analysis the cancel message sent by the server in TCP,
which will cause the phone always ringing.
144. Fixed the issue that when dial out the third party with the DSS Key set as speed dial, if the
third party answer the call and then hang up, the phone can’t get back the original call by
press the resume key.
145. Fixed the issue that in some server, when transferring, the phone will hold the call first and
then transfer, which will make another side of the call to hear a short music on hold tone.
146. Fixed the issue that the phone in the announce group can’t answer automatically when
received an announce call.
147. Fixed the issue that the light status is not correct when the Music on hold and BLF function
enabled at the same time.
148. Fixed the issue that the phone will stop sending RTP package somtines when there is an
incoming call.
149. Fixed the issue that when download the Broadsoft Phonebook error, it will prompt to change
password message.
150. Fixed the issue that it can’t support the character “#” in the auto provision URL.
151. Fixed the issue that there is no ring back tone when call out and received the 183 and 180
message.
152. Fixed the issue that it is not available to configure the DNS SRV type.
153. Fixed the issue that after the configuration of SCA, when press the CONF button during a
call, it will show “shared line not available”on LCD.
154. Fixed the issue that when the phone subscribe the BLF list, log out and then subscribe again,
the server will response a 403 message which will cause the BLF light status not correct.
155. Fixed the issue that there is no audio during the call when open the SonicWall fire wall.
156. Fixed the issue that the SMS can’t send correctly because of the MESSAGE sending port is
not correct.
157. Fixed the issue that the call hang up because of the ACK sending port is not correct.
158. Fixed the MWI subscribe failed issue.
159. Fixed the issue that paging function can’t compatible with the Cisco PBX.
160. Fixed the issue that the after Transfer, the phone will send the 302 moved temporarily
message continually.
161. Fixed the issue that when using BLF, the phone reply a 481 message to the notify message
from other caller ID, which cause the server never reply a notify message to the phone.
162. Fixed the issue that the phone will not send the subscribe message to subscribe the BLF list
after the phone launched.
163. Fixed the issue that when set a DSS Key as BLF, add and delete the BLF again and again, it
will not subscribe successfully sometimes, and the BLF light will not turn on.
Yealink SIP Phones’ Firmware Change Log
9/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
164. Fixed the issue that it will not subscribe again when there is no reply after the first subscribe
message of BLF LIST.
165. Fixed the issue that it can’t pick up the incoming anonymous call.
166. Fixed the issue that if the phone received the replace message which has changed call ID in
the ring back status, it will not finish the call and there is no audio at the same time.
167. Fixed the issue that after the configuration of BLF LIST, when you reregister or log out an
account, it will cause the memory leak.
168. Fixed the issue that when connect an EXP39 and EHS (without wireless headset), the label of
some parameters like speed dial can’t edit.
169. Fixed the issue that in the Broadsoft Platform, when using the HUNT GROUP function and
blind transferred to that same GROUP, the phone will crash.
170. Fixed the issue that it can’t transfer successfully in the ASTERISK server.
171. Fixed the issue that Option reply the 200OK message to the wrong IP address.
172. Fixed the issue that the phone will create a new call when received the same parameters for
the 183 music ring server.
173. Fixed the issue that when auto provision with RPS, the phone can’t access to FTP server with
defined user name and password, but with anonymous user name.
174. Fixed the issue that there is no isfocus in the 200OK message received by the phone, which
will cause send refer message failed.
175. Fixed the memory leak issue when auto provision with https server.
176. Fixed the issue that it can’t set the T1 time as decimal point when doing the configuration of
SIP Session Timer(seconds).
177. Fixed the issue that when BLF need to subscribe again, the Server will reply 401 or 407
message which will make the BLF light status not correct.
178. Fixed the issue that it can’t hide the information which is related to the Black list.
179. Fixed the issue that there is no ringtone before the phone answered automatically when
received the ‘sip:answer-after’ message.
180. Fixed the issue that the phone will not reply to the refer message correctly.
181. Fixed the issue that the BLF light status will not correct because the phone received the
notify message that contain several status but phone can’t recognize the correct priority.
182. Fixed the issue that when two phones set the same BLF number, the status of BLF light will
not be the same at the same time.
183. Fixed the issue that there is no audio during the call after pick up successfully.
184. Fixed the issue that the phone can’t reboot after received the reboot message from Broadsoft
Server.
185. Fixed the issue that when using the 3CX server, it will still show busy status of the number in
the Server when it has finished the attended transfer and hang up.
186. Fixed call back failed issue when the number including server IP.
187. Fixed the issue that the phone doesn’t verify the character format in the webpage.
188. Fixed the issue that when use DNS SRV, it can’t call out because the phone received the
OPTION message but analysis failed.
189. Fixed the issue that it can’t support the character “#” in the remote phonebook URL.
190. Fixed the issue that it can’t login Hot Desking account successfully if the password length is
longer than 3 digits.
Yealink SIP Phones’ Firmware Change Log
10/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
191. Fixed the issue that in a 3-way conference, the other two parts can’t hear the voice of the
people who start the conference.
192. Fixed the issue that when the phone is ringing, it can’t answer the call through the answer key
and Speaker button.
193. Fixed the issue that when auto provision with PNP, the phone will send the HTTP message
twice.
194. Fixed the issue that when hang up a call with the EHS36, but it is still connected in headset.
195. Fixed the issue that when dialing, there is no ringtone because the codec difference and no
analysis for the DSP.
196. Fixed the issue that it needs to configure the line key as a SCA after you have done the SCA
configuration on Account-Advanced interface.
197. Fixed the issue that when picked up the BLF monitored number, it can’t blind transfer to the
same monitored number again.
198. Fixed the issue that when searching LDAP for several times, it will cause the memory leak.
199. Fixed the issue that A (open SRTP) call a GRANDSTREAM phone (SRTP closed),
GRANDSTREAM phone answer and then hang up the call, at this time, A will crashed.
200. Fixed the issue that when the phone is using the external IP but the PBX is using he internal
IP, then make a call, the call will lose one-way audio.
201. Fixed the issue that it will not notice the network change and hang up the call when unplug
the network label.
202. Fixed the issue that the LDAP search delay time is not effect.
203. Fixed the issue that the parameters which contain the character ‘@’ will not take effect when
doing autop.
204. Fixed the issue that the current call will randomly lose audio when there is a second call
comes in and goes to call waiting.
205. Fixed the issue that the audio will delay if action-URL is used to off hook the phone before
answering the call.
206. Fixed the issue that the exact password of HTTPS server can be seen in the syslog exported
from the Phone.
207. Fixed the issue that when using the wireless headset to answer the first call and hang up with
handset, the answer key of the headset needs to be pressed twice in order to answer the
second call.
208. Fixed the issue that when T26 and T28 are close to each other, the DTMF sound will have
interference on each other.
209. Fixed the issue that it will not do the validity inspection of the input, in the DSSKYE/Dial
Plan/ Local Directory/ Blacklist/Broadsoft/Calllog input field.
210. Fixed the issue that the first call will randomly lose audio when there is a second call comes
in.
211. Fixed the issue that the phone will repeatedly reboot when using PoE.
212. Fixed the issue that there is no ringback when the phone received the 180 message from
Broadsoft server.
213. Fixed the issue that when the login expire is set to 3600, the phone will not re-register after
3600 seconds.
Yealink SIP Phones’ Firmware Change Log
11/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
214. Fixed the issue that when use OpenVPN, the IP of DNS will change, at this time, phone will
not send the request to the correct DNS.
215. Fixed the pickup fail issue when fill in the SIP server as domain name.
216. Fixed the issue that it is unavailable to fill in the value of label for BLF in the web page of
EXP39, when connected EXP39 and EHS36 at the same time.
217. Fixed the issue that it needs to press Hold key twice in order to resume the held call.
218. Fixed the issue that the port in the contact domain of SIP message is not correct when using
TLS.
219. Fixed the issue that the autop failed because the incorrect way to deal with the character‘%’.
220. Fixed the issue that the AES Key, trusted certificates and server certificates are all in the
syslog exported.
221. Fixed the issue that the Send Pound Key doesn’t make effect when it is set to enable.
222. Fixed the issue that the PhoneLock password set on LCD doesn’t take effect.
223. Fixed the issue that the volume is not stable when adjust it with Speaker.
224. Fixed the issue that when set the dial plan, it will add the prefix twice when dialing from the
call log.
225. Fixed nine spelling mistakes of Time zone.
Yealink SIP Phones’ Firmware Change Log
12/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
4. Description to the new added features
1. Added new mechanism of Auto Provisioning feature.
Detail:For more details please refer to Yealink Auto Provision User Guide.pdf
2. Added automatic BLF list configuration feature on DSS key.
Description:After configuring BLF list URI on one account, corresponding BLF list will be
configured automatically on available DSS key in order.
Detail: For more details please refer to Yealink SIP-T2xP User Guide.pdf.
3. Added one shared line account supports multiple calls feature.
Path: Account -> Advanced page.
Description:There is no need to do the configuration in the DSS Key interface, it just need to
select the Broadsoft SCA option in the drop-down menu of shared line parameter.
There is difference between the symbol of SCA account and normal account on the Idle interface.
Long press the LineKey/DssKey for 1s to show the call list of the SCA account.
Add the PriHold soft key on the talking interface of the SCA account.
Yealink SIP Phones’ Firmware Change Log
13/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
The display of the PriHold soft key on the talking interface of SCA account:
Detail:For more details please refer to the introduction of SCA in Yealink SIP-T2xP User
Guide.pdf.
4. Added Call Pickup soft key feature
Path:PhoneSoftkey Layout
Yealink SIP Phones’ Firmware Change Log
14/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
Description:Support the customer set soft key as all Pickup in the soft key layout of dialing
interface.
The display of Call Pickup soft key on LCD:
Detail:For more details please refer to the introduction of Call Pick in Yealink SIP-T2xP User
Guide.pdf
5. Added “Visual Alert for BLF Pickup” and “Audio Alert for BLF Pickup” configuration.
Pate: PhoneFeatureCall Pickup
Yealink SIP Phones’ Firmware Change Log
15/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
Description:
Visual for “BLF +Pick code “:when set the “BLF +Pick code “, when a call comes to the
monitored number, a Visual will show on LCD as below
BLF pickup tone,:when set the ‘BLF + pickup code’, it will has a audio like ‘du’ when a call
comes to the monitored number. The default value of this parameter is ‘disable’.
Detail: For more details, please refer to the introduction of Busy Lamp Field (BLF) in Yealink
SIP-T2xP User Guide.pdf.
6. Added the prompt interface for “Action URI” feature
Path:PhoneFeatureAPI SecurityTrusted Action URI Server List
Description:Trusted Action URI Server List, When you active the Action URI function(fill
in a IP address), if the phone received a remote control command of Action URI , it will pop
up a prompt interface first, and customers can choose to accept or reject it(the similar scenario
like remote assistance).
Yealink SIP Phones’ Firmware Change Log
16/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
the prompt interface on LCD:
The format of the IP address:
1) Support one or more Discontinuous IP address ,separeted with a comma.
For example, when you fill in the ip like “10.1.3.66,192.168.1.20”, at this time, only the
person using the ip address of 10.1.3.66 or 192.168.1.20 can remote control the phone
with Active URI.
2) Support a continuous IP section, use the format like ‘*.*.*.*’ to design the IP section that can
access to the phone. The range of
‘ * ‘ is 0~255
For example
10.1.3.* means the IP section of 10.1.3.0~10.1.3.255
10.1.*.* means the IP section of 10.1.0.0~10.1.255.255
3) The default value of Trusted Action URI Server List is empty, that means prohibit all the
remote control of the phone.
7. Supported to show the hardware version and firmware version of the EHS and EXP
device in the Status page.
Path: Status EXP (it will display only when the EHS or EXP device is connected)
Description:
When EXP38/39 or EHS36 is connected, phone will show the hardware version and
firmware version of them in the status interface of the phone web GUI.
When EXP38/39 or EHS36 is disconnected, phone will refresh the phone web GUI, the
information of the EXP and EHS will disappear.
Firmware information:
Type
Hardware Version
Old Firmware Version
Newest Firmware Version
EHS36
48.0.0.0
0.16.0.0
1.16.0.0
Yealink SIP Phones’ Firmware Change Log
17/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
EXP39
32.0.0.0
4.16.0.0
5.16.0.0
EXP38
16.0.0.0
4.17.0.0
5.17.0.0
8. Added “Play local DTMF Tone” configuration
Path :PhoneFeatureAudio Settings
Description:
When set to Enable, the user can hear the DTMF tone when pressing the DTMF during a call,
when set to Disable, the user can’t hear the DTMF Tone when pressing the DTMF during a
call.
9. Added “DHCP Active” configuration.
Path :UpgradeAdvanced
Yealink SIP Phones’ Firmware Change Log
18/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
Description:
If this option is enabled,it means phone can get the Autop URL by DHCP Option value .If
disabled,phone can’t get theAutop URL by DHCP Option value.
10. Added “HeadSet Key In Talk” configuration
Path :Phone->Features->General
Description:
When set HeadSet Key In Talk to Disable,
If phone is in HeadSet mode, at this time there will be no response when the user press the
Speaker or pick up the handset.
If phone is not in HeadSet mode, then the user press the Headset button to enter the HeadSet
mode, at this time, there will be no response when the user press the Speaker or pick up the
handset.
When set HeadSet Key In Talk to enable, the phone will work normally.
11. Added “Phone Unlock PIN” on LCD.
Path :Menu->Setting->Basic Setting->Phone Unlock PIN
Yealink SIP Phones’ Firmware Change Log
19/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
Description:it can be used to configure the unlock PIN on LCD. And the default value of the
PIN is ‘123’.
Detail:For more details, please refer to the introduction of the Phone unlock PIN in Yealink
SIP-T2xP User Guide.pdf
12. Added Mac address info to User-Agent header on SIP message.
Description:
This feature is configurable only by Auto Provision, it is defaulted to be disable.
Enable this Feature:
Set ‘network.sip.tag_mac_to_ua.enable = 1’ in your configure files.
And the MAC address will show in the User-Agent header.
Yealink SIP Phones’ Firmware Change Log
20/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
Disable this Feature :
Set ‘network.sip.tag_mac_to_ua.enable = 0’ in your configure files.
And the MAC address won’t show in the User-Agent header.
Detail:For more details please refer to Yealink Auto Provision User Guide.pdf
Yealink SIP Phones’ Firmware Change Log
21/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
5. Optimization description
1. Supported to enter the Voicemail box by pressing the Message button when then Menu
key is locked.
2. Added the “Transfer Mode via Dsskey” configuration.
Path :Phone-> Features->Transfer SettingsTransfer Mode via DSSkey
Description:
(1) When DssKey is set to BLF,BLF List,Speed Dial,Transfer, if “Transfer Mode via
DSSkey”is set to “Blind Transfer” ,phone will make blind transfer when pressing this
DSS key during an active call
(2) When DssKey is set to BLF,BLF List,Speed Dial,Transfer, if “Transfer Mode via
DSSkey” is set to “Attended Transfer” ,phone will make attended transfer when pressing
this DSS key during an active call
(3) When DssKey is set to BLF,BLF List,Speed Dial,Transfer, if “Transfer Mode via
DSSkey” is set to “New Call” ,phone will make a new call when pressing this DSS key
during an active call
3. Classified the configurations in the PhoneFeatures web setting page.
Path :Phone-> Features
Yealink SIP Phones’ Firmware Change Log
22/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
The Web frame structure of V61 version:
4. Supported DND & FWD separated feature.
Path: Phone-> Features->Forward/DND
Yealink SIP Phones’ Firmware Change Log
23/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
Description:
When the “mode” is set to “Phone”, DND&FWD configuration will effect on all accounts
When the “mode” is set to “Custom”, DND&FWD can be controlled separately by account.
Detail:For more details, please refer to the introduction of the DND and FORWARD feature
in Yealink SIP-T2xP User Guide.pdf
5. Optimized keypad lock feature
Path:Phone-> Preference
Detail:For more details, please refer to the introduction of Keypad Lock feature in Yealink
SIP-T2xP User Guide.pdf
Yealink SIP Phones’ Firmware Change Log
24/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
6. Supported TAP mode of OpenVPN.
1) dev-TUN mode, works in network layer , already supported in T2X V61.
2) dev-TAP mode, works in data link layer, support serveralOpen VPN connection.
7. Added the OpenVPN feature toT20/T22 models.
8. Modified ATS conference feature to be Optional.
Description: Deleted ATS conference feature, not support in the neutral version, but set as a
customer special feature.
9. Modified Draft BLA feature to be Optional.
Description: Deleted Draft BLA feature, not support in the neutral version, but set as a
customer special feature.
10. Added PEAP-MSCHAPV2 authentication for 802.1X feature.
1) Add PEAP-MSCHAPV2 option on LCD, path: Advanced->Network->802.1X Setting
2) Add PEAP-MSCHAPV2 authentication option and upload certificate option in
Network->Advanced->802.1X webpage (certificate should be uploaded through
webpage).
3) network.802_1x.root_cert_url = (upload the root certificate of 802.1x)
4) network.802_1x.root_cert_file_name = (save the name of 802.1X CA certificate)
11. Added EAP-TLS authentication for 802.1X feature.
1) Add EAP-TLS option on LCD, path: Advanced->Network->802.1X Setting
Yealink SIP Phones’ Firmware Change Log
25/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
2) Add EAP-TLS authentication option and upload certificate option in
Network->Advanced->802.1X webpage (certificate should be uploaded through
webpage).
3) network.802_1x.client_cert_url = (upload the client certificate of 802.1x)
4) network.802_1x.client_cert_file_name =(save the device certificate of 802.1x )
12. Added domain name supported for PushXML server address.
Description:
When fill in the domain name to the push XML server IP, www.xmyealink.com for example,
the phone will analysis correctly to the domain and after get the result, it will receive the
correct XML informationfrom the corresponding IP address.
13. Optimized “Logo + character HD ”icon display in the LCD of T28/T26 when calling
with codec G722.
When T28 call T26 with the codec G722, both of T28 and T26 will display“Logo + character
HD ”in the lower right corner of LCD.
14. Did optimization of dealing with BLF Notify message which is out of dialog.
Yealink SIP Phones’ Firmware Change Log
26/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
Description:
Normally, the phone only deal with BLF Notify message which matched with subscribe
message. But the BLF Notify message from some server doesn't match with subscribe
message.
When you enable "Out Dialog BLF" option, the phone can deal with such BLF Notify
message which is out of Dialog.
Path :Account Advanced
15. Did optimization of ringtone.
Description:
Old ringtone is not standard,
Optimized five standard ringtones
1) Ring2S then stop for 4S then repeat.
2) Ring400ms then stop for 200ms then ring 400ms then stop2000ms then repeat.(For
incoming call from external)
3) Ring 400ms then stop for 200ms then ring 400ms then stop2000ms then repeat. (For
incoming call from internal)
4) Ring 500ms then stop for7500ms then repeat.
16. Default Input Method of the Broadsoft network phonebook.
Description: Default Input Method of the Broadsoft network phonebook to ABC
17. Added some fields to the snmp section.
Description: Added some fields to the snmp section ,for example, community ,sysContact .
18. Added the feature that the phone can use the SNMP to reboot the phone.
19. Added the dual-headset function.
Yealink SIP Phones’ Firmware Change Log
27/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
20. Added new parameters to Action URL feature.
Description: New parameters added to Action URL feature are showing below
AnswerNewIncomingCall, RejectIncomingCall, TransferFinished ,TransferFailed,
ForwardIncomingCall
21. Added “Voice Mail Tone “configuration
Path: Phone -> Feature ->General
Description:
When the “Voice Mail Tone” is set to enable, phone will play the voice mail tone when
received avoice mail.
When the “Voice Mail Tone” is set to disable, phone will not play the voice mail tone when
received a voice mail.
22. Optimized XML browse.
Description: Optimized XML browse that it can support hot desking feature.
23. Added “Allow IP Call “configuration.
Path: Phone -> Feature -> General
Description:
When“Allow IP Call”is set to enable, the user can make an IP call.
When“Allow IP Call”is set to disable, the user can’t make an IP call.
24. Did optimization that the phone can disable the local DTMF tone.
25. Did optimization that the phone can support 99 entries for Dial-now Rule.
26. Did optimization of the LDAP search interface, show the default IME when enter this
interface and the IME can be configured.
Description:
When enter the LDAP interface through the DSSKEY, it will show the IME immediately, and
this IME is the one you used last time.
Yealink SIP Phones’ Firmware Change Log
28/29
YEALINK NETWORK TECHNOLOGY CO.,LTD
www.yealink.com.cn
When doing LDAP search in the Dial/PreDia interface, the default IME can be configured by
the configure file.
Feature effect.
1. When enter the LDAP interface through the DSSKEY, it will show the IME immediately,
and this IME is the one you used last time.
2. When doing LDAP search in the Dial/PreDia interface, the default IME only can be
configured by Auto Provision, and it is decided by the parameter ‘IMEType=X’
X= 0 means 2ab
X= 1 means 123
X= 2 means abc
X= 3 means ABC
27. Did optimization of DHCP, supported to get NTP server address through Option 42..
Description:
When this feature is enabled, once the phone boot up and get IP address through DHCP, the
phone will get the NTP server address at the same time from the DHCP message that send
from DHCP server. And fill in the NTP server info to the NTP server address bar, and get the
time info through NTP server.
Note: Before you use this feature, please enable the getting time through DHCP feature and
the NTP serve address must be an IP address.
Detail: For more details please refer to Yealink SIP-T2xP User Guide.pdf.
Yealink SIP Phones’ Firmware Change Log
29/29
Open as PDF
Similar pages