SWINGAWAY
SPORTS PRODUCTS
SPORTS PRODUCTS
SWINGAWAY
SPORTS PRODUCTS
PRO TRAVELER
PRO TRAVELER
SPORTS PRODUCTS
ASSEMBLY MANUAL
ASSEMBLY MANUAL
IMPORTANT: THIS IS SERIOUS EQUIPMENT
Safety Precautions
WEAR A HELMET AND FOLLOW THE SAFETY
PRECAUTIONS LISTED ON THE BACK PAGE
The SwingAway® has been designed to be safe when used as intended; the swinging bat
is the most dangerous aspect of using the SwingAway®. To ensure safe operation with
maximum benefit, please read the following recommendations and review them with
anyone who will be working on or around the machine.
9-1
! A batting helmet with NOC-SAE approval must be worn at all times when working on or
around this and any other mechanized baseball equipment.
Inspect all parts prior to each use. Do not use if there is any sign of wear or damage.
Balls and cords are subject to wear with use. The SwingAway® is designed to be weatherproof;
however, continual unprotected outside storage will accelerate deterioration of components.
Contact your Rep or Rebound Sports Technology for information on maintenance and
replacement parts
R
JK
Q
!
N
AA
Children using the SwingAway®, or in the area of use, under the age of 12 must be
supervised at all times.
!
CORD
CONNECTOR
O
V
! Users must be aware of coaches and spectators in the surrounding area. We recommend
for outside use that 16' X 16' area be roped off around the area before use.
! The SwingAway® net is a very effective rebounder. DO NOT use for "pepper" drills! In
other words, do not hit a loose ball into the net. Use only a baseball or softball which has been
properly attached to the SwingAway® and is in good condition.
W
U
M
X
P
H
W
Hit the ball towards the net only. Do not intentionally hit cords, net or frame. Closely
supervise beginners who may have trouble hitting the ball. Hitting the cord will accelerate cord
wear. Hitting the cord will direct the bat back towards the batter creating an unsafe condition.
!
Do not stand on or jump on the SwingAway®. Do not jump on the SwingAway® to dunk a
basketball.
!
!
10-2
The SwingAway® can weigh approximately 32-55 pounds, depending on the model and
accessories. The Swingaway Pro Traveler can weigh up to 55lbs. Caution should be used in
lifting and moving it request help if necessary.
Attach and adjust all cords and tighten knobs before use. Hand-tighten knobs only over-tightening may cause damage to the tubing.
!
Always use the SwingAway® on level ground. Avoid wet or slippery areas.
When using the SwingAway® on hard or smooth surfaces (indoors or out), we recommend
it be placed on a piece of rubber-backed indoor/outdoor carpet. A sandbag may be used on the
rear base frame loop to stabilize it when used by a "heavy hitter". A specially designed
sand/gravel bag is available. Please refer to the parts form for ordering information.
!
When transporting the SwingAway®, ensure it is securely fastened on or inside your
vehicle.
!
Exercise caution when using the pitchback net. Throw the ball lightly into the net until a feel
is gained for how it rebounds.
!
S
E
10-1
E
Do not use the SwingAway® under the influence of any drugs or alcohol.
!
!
Y
9-1
9-2
E
H
10-1
10-2
JK
L
M
N
O
P
Q
R
S
T
9-2
TOP FRAME HOOP
BOTTOM FRAME HOOP
FOOT SPLIT FITTING
BASE HOOP FITTING
LARGE BASE HOOP
SMALL BASE HOOP
TOP BOOM (53”)
BOTTOM BOOM (53”)
INNER TELESCOPE
OUTER TELESCOPE
TELESCOPE FITTING
HEIGHT ADJUST ROPE
BOOM SUPPORT FITTING
TOP BOOM PULLEY
BOTTOM BOOM PULLEY
L
T
U
V
W
X
Y
Z
AA
KNOBS (4)
NET AND RED ROPE
NET CLIPS (56)
BUNGEES (3)
BALL WITH TETHERS
MIDDLE FRAME PULLEY
TRAVEL BAG
(not shown)
BUNGEE BALLS (2)
Note: The PRO TRAVELER comes
standard with 1/4” institutionalgrade bungees.
Copyright © SwingAway Sports, Inc. 2013 | All Rights Reserved
Copyright © SwingAway Sports, Inc. 2013 | All Rights Reserved
THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
HITTING
MAT
SWINGAWAY
SPORTS PRODUCTS
SPORTS PRODUCTS
PRO TRAVELER
ASSEMBLY MANUAL
SWINGAWAY
SPORTS PRODUCTS
SPORTS PRODUCTS
Dear SwingAway Customer,
Thank you for your new purchase of a SwingAway Batting System. Today will launch a New
Chapter in your baseball or softball career. Your hard work and dedication combined with your
New SwingAway will make you a better Hitter! Below are several IMPORTANT Steps to make
sure you have a Long Term and POSITIVE Experience with your SWINGAWAY Hitting System.
PRO TRAVELER
ASSEMBLY MANUAL
HITTING MAT
FOR RIGHT HANDED HITTERS
ALIGN THE MACHINE TO SIMULATE INSIDE AND OUTSIDE PITCHES
WARRANTY SwingAway Sports Products stands 100% behind all of our products. Please
check the contents of the box to make sure ALL the parts and components are intact.
Remember some of the components listed may be Pre-Assembled. If a part is missing or was
damaged during shipping call SwingAway IMMEDIATELY at 800-999-1968 or email us at
service@swingaway.com. Our Customer Service Professionals will take complete care of any
issue. (ALL MODELS HAVE A 90 DAY LIMITED WARRANTY)
DO NOT CALL OR TAKE BACK THE MACHINE TO THE RETAILER. They do not carry our Parts and
Components. Please register your purchase on-line at
http://www.swingaway.com/warranty.htm
It is extremely important to assemble your SwingAway Properly. Please follow all assembly
instructions exactly as described in this manual. For further detailed instructions, please visit
our Social Media Sites below for the most up to date videos. Please pay close attention to
How to assemble and Attach the Ball-Kits, Tether and Bungees.
SwingAway's Facebook Page - Open the following link and remember
to “Like Us” http://www.facebook.com/SwingAwaySports
- This page will allow you to follow us while posting comments,
pictures, videos and stay current with all news related to SwingAway.
OUTSIDE PITCH
MIDDLE PITCH
INSIDE PITCH
FOR LEFT HANDED HITTERS
ALIGN THE MACHINE TO SIMULATE INSIDE AND OUTSIDE PITCHES
SwingAway's YouTube Channel - Open the following link Subscribe to
this channel: http://www.youtube.com/user/HittingPro
- This channel is constantly updated with assembly instructions,
testimonials, instructional videos and other news about SwingAway.
SwingAway's Twitter Page - Open the following link and remember to
“Follow Us” http://www.twitter.com/SwingAwaySports
- This page will allow you to follow us, read tweets, pictures, videos
and stay current with all news related to SwingAway.
Remember if you have any questions or issues with your New SwingAway, Contact us directly.
Your retailer can not help or give you the Technical Support or Replacement Parts
Once the SwingAway is set up properly, then you are ready to SWINGAWAY and achieve your
True Hitting Potential and “GET REAL GOOD, REAL FAST”!!!
John J.Flading
President and CEO
SWINGAWAY SPORTS PRODUCTS, INC
OUTSIDE PITCH
C IA
SP E
L
ER
F
F
O
MIDDLE PITCH
INSIDE PITCH
2 BASEBALL KITS
(SA-BBK)
PROFESSIONAL TUNE UP KIT
$
49.99
FREE
SHIPPING
This kit includes an Authentic (Rawlings or
similar) institutional baseball, ball rope and 3
institutional bungee cords, which are stronger
and more durable.
Copyright © SwingAway Sports, Inc. 2013 | All Rights Reserved
Copyright © SwingAway Sports, Inc. 2013 | All Rights Reserved
THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
SWINGAWAY
SPORTS PRODUCTS
SPORTS PRODUCTS
STEP 11
SWINGAWAY
SPORTS PRODUCTS
PRO TRAVELER
ADJUST THE BALL HEIGHT
AND GET YOUR
HITTING MAT OUT
PRO TRAVELER
SPORTS PRODUCTS
ASSEMBLY MANUAL
ASSEMBLY MANUAL
IN THE BOX
Z
W
VERY IMPORTANT:
BEFORE YOU HIT THE MACHINE
MAKE SURE ALL YOUR
CONNECTIONS ARE TIGHT AND THE CORDS
AND BUNGEES ARE TAUT
AND READ THE SAFETY LIST
ON THE BACK PAGE!
ADJUST THE CORD
IN THIS FITTING TO
CONTROL THE BALL
HEIGHT
TELESCOPE ASSEMBLY
M
INNER TELESCOPE
N
OUTER TELESCOPE
O
TELESCOPE FITTING
P
HEIGHT ADJUST ROPE
WITH CORD
CONNECTORS (4)
FRAME ASSEMBLY
O
N
M
P
X
TELESCOPE
ASSEMBLY
S
L
FRAME ASSEMBLY
9-1 TOP FRAME HOOP
9-2 BOTTOM FRAME
HOOP
10-1 LARGE BASE HOOP
10-2 SMALL BASE HOOP
E
FOOT SPLIT FITTINGS
(4)
H
BASE HOOP FITTING
Q
BOOM SUPPORT
FITTING
T
KNOBS (4)
Y
MIDDLE FRAME
PULLEY
AA BUNGEE BALLS (2)
BALL
ASSEMBLY
BOTTOM BOOM ASSEMBLY
R
JK
BALL ASSEMBLY
W
BUNGEES (3)
(ONE EXTRA IS
INCLUDED)
X
BALL WITH TETHERS
WITH CORD
CONNECTORS (2)
V
BOTTOM BOOM ASSEMBLY
L
BOTTOM BOOM (53”)
S
BOTTOM BOOM
PULLEY
SEPARATE PARTS
JK
TOP BOOM (53”)
R
TOP BOOM PULLEY
U
NET AND RED ROPE
V
NET CLIPS (56)
Z
TRAVEL BAG
Not shown:
Allen wrench, manual
U
HITTING MAT
Copyright © SwingAway Sports, Inc. 2013 | All Rights Reserved
Copyright © SwingAway Sports, Inc. 2013 | All Rights Reserved
THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
SWINGAWAY
SPORTS PRODUCTS
SPORTS PRODUCTS
SWINGAWAY
SPORTS PRODUCTS
PRO TRAVELER
CORD CONNECTORS
PRO TRAVELER
SPORTS PRODUCTS
ASSEMBLY MANUAL
ASSEMBLY MANUAL
THREAD THE TETHERS
(BOTH SIDES)
STEP 10
CORD CONNECTORS ARE USED
TO CONNECT CORDS AND BUNGEES
CORD
CONNECTOR
LOCATIONS
NET NOT
SHOWN
FOR CLARITY
THREAD THIS
THRU THE CORD
CONNECTOR
AND TIE A KNOT
3
1
KNOT THE END OF THE
CORD OR BUNGEE
(LEAVE ABOUT AN INCH)
1
2
D-RING ON
BASE
2
PUSH IT THROUGH
THE LARGE HOLE
IN THE CONNECTOR
3
LOCK IT IN BY PULLING
THE CORD UP INTO
THE SMALL HOLE
THREAD YOUR CORDS
THRU THE METAL D-RINGS
ON EACH SIDE
SEARCH “SWINGAWAY ASSEMBLY” FOR
THE LATEST VIDEO INSTRUCTIONS
Copyright © SwingAway Sports, Inc. 2013 | All Rights Reserved
Copyright © SwingAway Sports, Inc. 2013 | All Rights Reserved
THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
SWINGAWAY
SPORTS PRODUCTS
PRO TRAVELER
SPORTS PRODUCTS
STEP 9
ASSEMBLY MANUAL
GET BALL ASSEMBLY AND
THREAD THE BUNGEES
SWINGAWAY
SPORTS PRODUCTS
SPORTS PRODUCTS
STEP 1
PRO TRAVELER
ASSEMBLY MANUAL
SEPARATE TUBING
COMPONENTS ON THE FLOOR
(BUNGEES SHOULD BE TAUT)
THREAD THIS
THRU THE CORD
CONNECTOR
AND TIE A KNOT
2
GO THRU
THIS PULLEY
3
COME THRU
TOP PULLEY
1
PUT BUNGEE
BALLS ASIDE
FOR USE IN
STEP 8
NET NOT
SHOWN
FOR CLARITY
FRAME ASSEMBLY
BALL
ASSEMBLY
TELESCOPE
TOP BOOM
BOTTOM BOOM
TEATHERS NOT
SHOWN FOR
CLARITY
STEP 2
JK
UN-FOLD THE SMALL BASE
FRAME
6
THREAD THIS
THRU THE CORD
CONNECTOR
AND TIE A KNOT
5
GO THRU
CENTER
BOOM PULLEY
4
THREAD BOTTOM
BUNGEE THRU
BOTTOM PULLEY
SEARCH “SWINGAWAY ASSEMBLY” FOR
THE LATEST VIDEO INSTRUCTIONS
Copyright © SwingAway Sports, Inc. 2013 | All Rights Reserved
Copyright © SwingAway Sports, Inc. 2013 | All Rights Reserved
THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
SWINGAWAY
SPORTS PRODUCTS
SPORTS PRODUCTS
STEP 3
PRO TRAVELER
ASSEMBLY MANUAL
INSERT THE TELESCOPE
THE SMALL END, (BLACK END)
GOES INTO THE
BASE HOOP FITTING
TELESCOPE
ASSEMBLY
SWINGAWAY
SPORTS PRODUCTS
PRO TRAVELER
SPORTS PRODUCTS
STEP 8
ASSEMBLY MANUAL
ATTACH THE NET WITH THE
NET CLIPS AND BUNGEE BALLS
-
CLIP ON 4 CORNERS FIRST
-
CLIP EVERY OTHER WEB ON TOP AND BOTTOM
-
CLIP EVERY WEB DOWN THE SIDES
(LEAVING ROOM FOR SLEEVES)
V
NET
CLIP
BASE
HOOP
FITTING
6
2
5
10
1
CORDS NOT
SHOWN FOR
CLARITY
BUNGEE BALLS (2)
THRU NET AND
AROUND SLEEVES
9
14
WEAVE IN
TARGET ROPE
10 X 15 WEBS HIGH
TIE AT BOTTOM
13
12
4
TIGHTEN
KNOB
8
11
7
3
Copyright © SwingAway Sports, Inc. 2013 | All Rights Reserved
Copyright © SwingAway Sports, Inc. 2013 | All Rights Reserved
THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
SWINGAWAY
SPORTS PRODUCTS
PRO TRAVELER
SPORTS PRODUCTS
STEP 7
ASSEMBLY MANUAL
IMPORTANT!
LEVEL YOUR MACHINE
TIGHTEN TELESCOPE KNOB
SWINGAWAY
SPORTS PRODUCTS
SPORTS PRODUCTS
STEP 4
PRO TRAVELER
ASSEMBLY MANUAL
INSERT THE OTHER END OF THE
TELESCOPE INTO THE
BOOM SUPPORT FITTING
WHILE ON A FLAT SURFACE, ADJUST THE FRAME BY
PULLING OR PUSHING THE TELESCOPING TUBES
MAKE SURE ALL THE FEET ARE TOUCHING THE GROUND
TIGHTEN THE KNOB ON THE MIDDLE TELESCOPE FITTING
CORDS NOT
SHOWN FOR
CLARITY
KNOB
TIGHT
BOOM
SUPPORT
FITTING
(BLACK)
LOOSEN
KNOB
THEN
TIGHTEN
KNOB
TIGHT
KNOB
TIGHT
TOUCH
FLOOR
TIGHTEN
KNOB
TOUCH
FLOOR
IMPORTANT:
BOTTOM BOOM FOOT
NEEDS TO BE ON THE FLOOR
Copyright © SwingAway Sports, Inc. 2013 | All Rights Reserved
Copyright © SwingAway Sports, Inc. 2013 | All Rights Reserved
THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
SWINGAWAY
SPORTS PRODUCTS
SPORTS PRODUCTS
STEP 5
PRO TRAVELER
ASSEMBLY MANUAL
RAISE THE HITTING FRAME
LOCK FRAME WITH SLEEVES
SWINGAWAY
SPORTS PRODUCTS
SPORTS PRODUCTS
STEP 6
PRO TRAVELER
ASSEMBLY MANUAL
INSERT THE TOP AND
BOTTOM BOOMS
SLIDE THE TOP BOOM
THRU FITTING AND ALL THE
WAY INTO THE TELESCOPE
(ABOUT 5 INCHES)
CORDS NOT
SHOWN FOR
CLARITY
SLIDE TOP PULLEY
ON THE TOP BOOM
SLIDE
DOWN
TO
LOCK
INSERT THE BOTTOM
BOOM ASSEMBLY
INTO THE METAL
STUB AND TIGHTEN
SLIDE
SLEEVES
DOWN
TIGHTEN
KNOB
Copyright © SwingAway Sports, Inc. 2013 | All Rights Reserved
Copyright © SwingAway Sports, Inc. 2013 | All Rights Reserved
THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
Open as PDF
Similar pages