RX-50-PRO INFORMATION SHEET The WyreStorm RX-50-PRO is a single-cable HD Display Receiver that offers the perfect solution for high spec, affordable, point-to-point HD distribution with excellent flexibility over distances up to 50m (164ft) along two Cat5eii/6/7 if IR control is not required in the installation. Key Product Features • Single cable Cat5eii/6 recieves 1080P HD video and HD audio transmission over distances up to 50m (164ft) • Follows IEEE-668B cable termination standards. • Automatically adjusts signal feedback, equalization and • HDMI V1.3b supported. • Port supports HDMI or DVI signals. • HDCP compliant. • LED indicators indicate power and video signal status of amplification. baluns • EDID management using DIP switch encourages • Units contain ESD (electrostatic discharge) protection communication between source/display devices to solve technology to guard again static build-up that can compatibility issues. damage circuitry. Key: HDMI MX-0808-PRO 50m Receiver Cat5e IRTX IRRX RS232 • 1080p HD video and HD Audio including Full support of 3D applications - frame sequential (Blu ray) and Interlaced stereoscopic (satellite/cable 3D broadcasts). • 24bit colour depth. • 5v power to paluns provided by mains adapter (included) or optional USB 5v cable for ease of power management and greater energy efficiency. • Mounting brackets and 5v mains power supply included • Fully cascadable to create longer distributions RX-50-PRO INFORMATION SHEET Wyrestorm USB 5V Power Adapters Recievers can be powered using a USB 5V cable connected to spare USB ports of inputs and outputs. These smart little cables not only solves power availability problems, especially at the display end, it is also far more energy efficient as recievers are only powered when devices are turned on. Specifications *Under perfect transmission conditions including straight cable runs with no electrical interference, bends, kinks, patch panels, or wall outlets.