Agilent 8752C and 8753D Network Analyzers

Agilent 8752C and 8753D
Network Analyzers
Configuration Guide
300 kHz to 1.3, 3 or 6 GHz
30 kHz to 3 or 6 GHz
The Agilent Technologies 8752C and 8753D are
part of a family of compatible products. For flexibility in specifying a solution that meets your exact
needs, a system may be ordered as multiple line
items. This guide should be used with the 8752C
and 8753D Data Sheet, which has a full description
of the items listed.
System Configuration Summary
This summary lists the main components required
to form basic measurement systems. Options or
peripherals may be added to provide enhanced
capability, data storage, or copies of the analyzer’s
data or display. This configuration guide provides
descriptions of product options and compatible
accessories. Information on 8753D systems begins
on page 2. For 8752C systems, see page 7. Service
and support products for both the 8753D and
8752C are listed on the last page.
Basic transmission/reflection measurements
q Agilent 8752C Network Analyzer
q Calibration kit for applicable connector type
(optional)
Full S-parameter measurements
q Agilent 8753D Network Analyzer
q Test port return cables, 50 or 75 ohms
q Calibration kit for applicable connector type
System with user-selected test set
q Agilent 8753D Network Analyzer
Option 011 Delete Built-in Test Set
q Transmission/reflection or S-parameter test set
q Test port return cables for selected test set
q Calibration kit for applicable connector type
Ordering Information
q Network analyzer, Agilent 8753D (30 kHz to 3 or
6 GHz systems)
Integrated network analyzer with built-in color
display, S-parameter test set, disk drive, and
30 kHz to 3 GHz synthesized source. A standard
(50 ohm) 8753D has two 7 mm test ports. An
operating and programming manual set is
included with each instrument.
q Option 002 Harmonic Measurement Capability
For measuring swept second and third harmonic
responses. Option 006 extends harmonic measurement capability to 6 GHz.
q Option 006 6 GHz Frequency Extension
Provides source and receiver operation to 6 GHz.
Do not order Option 006 with Option 075.
q Option 010 Time Domain Capability
For viewing reflection and transmission
responses in time or distance domain.
q Option 011 Delete Built-in Test Set
Removes test set components and allows direct
access to the R, A, and B receiver inputs. Source
start frequency limited to 300 kHz. Do not order
Option 011 with Option 075.
q Option 075 75 Ohm Impedance
Replaces the standard 50 ohm test set with a
75 ohm test set. Test ports are 75 ohm type-N
connectors. Do not order Option 075 with
Option 006 or Option 011.
2
q Option 1D5 High Stability Frequency Reference
Provides improved frequency accuracy over time
and with temperature variation.
q Option 0B0 Delete Operating Manual Set
q Option 0B1 Add Extra Operating Manual Set
q Option 1CM Rack Mount Kit (without handles)
q Option 1CP Rack Mount Kit With Handles
q Option 1BN MIL-STD 45662A Calibration
Certification
q Option 1BP MIL-STD 45662A Calibration with
Test Data
q Option UK6 Commercial Calibration Certificate
with Test Data
q Option W08 Convert one year on-site warranty
to three-year return-to-Agilent warranty
q Option W31 Two additional years of on-site
service (where available) The following localization options provide manuals that are partially
or completely translated into the specified languages, depending on the region.
q Option AB0 Taiwan - Chinese Localization
q Option AB1 Korea - Korean Localization
q Option AB2 China - Chinese Localization
q Option ABD Germany - German Localization
q Option ABE Spain - Spanish Localization
q Option ABF France - French Localization
q Option ABJ Japan - Japanese Localization
q Option ABZ Italy - Italian Localization
Measurement Accessories
Accessories are available in these connector types:
3.5 mm, 7 mm, 50 ohm type-N, 75 ohm type-N, and
type-F. A standard or Option 075 8753D includes
a built-in test set. A calibration kit and test port
cables should be added for a complete measurement system. For an 8753D Option 011 network
analyzer, you will also need to add a power splitter
or test set.
Test port cables are used to connect to the device
under test. Calibration kits include standards, such
as open/short circuits and loads, that are measured
by the network analyzer for increased measurement
accuracy. A verification kit is used to verify system
performance.
For 50 ohm Device Measurement
Test Port Cables
q 50 ohm 7 mm test port return cables, Agilent 11857D
A pair of 610 mm (24 in.) cables, for use with
the standard 8753D network analyzer or the
85046A and 85047A test sets.
q 50 ohm type-N RF cable set, Agilent 11851B
For systems based on an 8753D Option 011.
Includes three phase-matched 610 mm (24 in.)
cables and one 860 mm (34 in.) cable. Used
with the 85044A and 85044B test sets, and the
11850C and 11667A power splitters.
Calibration Kits
Choose a kit for each connector type to be used.
q 7 mm calibration kit, Agilent 85031B
Contains fixed loads, and open/short circuit.
q 50 Ohm type-N calibration kit, Agilent 85032B
Contains fixed loads, open and short circuits,
and 7 mm to type-N adapters for both connector
sexes for use with 7 mm test port cables.
q 3.5 mm calibration kit, Agilent 85033D
Contains fixed loads, one-piece open and short
circuits, and 7 mm to 3.5 mm adapters for both
connector sexes for use with 7 mm test port cables.
q Electronic calibration modules and control unit,
Agilent 85060 Series
This product family provides electronic calibration (ECal) capability. With ECal, the usual
calibration kit standards are replaced by two
solid state calibration modules which can be
programmed by a control unit to present many
different impedances to the test ports. A full
two-port calibration can be done with a single
connection in just a few minutes. There is less
chance for error and less wear on connectors.
ECal requires the 85060C ECal Control Unit in
addition to 85060 series calibration modules
in the appropriate connector type.
Verification Kit
q 7 mm verification kit, Agilent 85029B
Includes attenuators and mismatch attenuator
with data on a 3.5 inch disk for use in confirming accuracy enhanced system measurement
performance, traceable to national standards.
Test procedure is provided in the service manual.
For use with a standard 8753D, or with systems
including an 8753D Option 011 and an 85044A,
85046A, or 85047A test set. The 85031B 7 mm
calibration kit and 11857D test port cables are
also required.
Adapters
q 50 ohm type-N accessory kit, Agilent 11853A
Contains type-N male to type-N male adapters,
type-N female to type-N female adapters, and
type-N male and female shorts.
q 50 ohm BNC accessory kit, Agilent 11854A
Contains type-N to BNC adapters for both
connector sexes and a BNC male short.
3
For 75 ohm Device Measurements
Test Sets (For use with Agilent 8753D Option 011)
Test Port Cables
q 75 ohm type-N Test Port Cables, Agilent 11857B
A pair of 610 mm (24 in.) cables, for use
with the 8753D Option 075 or the 85046B
S-parameter test set.
q 50 ohm type-N RF Cable Kit, Agilent 11851B
For systems based on an 8753D Option 011.
Includes three phase-matched 610 mm (24 in.)
cables and one 860 mm (34 in.) cable. Used with
the 85044A and 85044B test sets, and the 11850C
and 11667A power splitters. An 11852B minimum
loss pad is also required with the 85044B.
Transmission/reflection test sets provide the capability to measure transmission and reflection characteristics of a two-port device in the forward
direction. S-parameter test sets can measure the
characteristics of a two-port device in either direction with a single connection.
Calibration Kits
q 75 ohm type-N calibration kit, Agilent 85036B
Contains 75 ohm fixed loads, open/short circuits,
and adapters.
q Type-F calibration kit, Agilent 85039A
Contains type-F male fixed load, open and short
circuits, type-F female to type-F female adapters,
and 75 ohm type-N to type-F adapters.
Minimum Loss Pads and Adapters
q 11852B 50 to 75 ohm minimum loss pad (300 kHz
to 2 GHz)
Adapts from 50 ohm type-N female to 75 ohm
type-N male. Nominal insertion loss is 5.7 dB.
q Option 004
Provides 50 ohm type-N male and 75 ohm type-N
female connectors
q 75 ohm type-N accessory kit, Agilent 11855A
Contains 75 ohm type-N male to type-N male
adapters, type-N female to type-N female adapters,
type-N male and female shorts, and type-N male
termination.
q 75 ohm BNC accessory kit, Agilent 11856A
Contains 75 ohm type-N to 75 ohm BNC adapters
for both connector sexes, a BNC male short, and
BNC male termination.
4
For 50 ohm Device Measurements
q 50 ohm transmission/reflection test set, Agilent 85044A
300 kHz to 3 GHz
Includes one 7 mm to type-N (f) adapter. Requires
the 11851B RF Cable Kit for connection to the
8753D Option 011.
q 50 ohm S-parameter test set, Agilent 85046A
300 kHz to 3 GHz
Requires the 11857D 7 mm Test Port Return
Cables for two-port device measurements.
Includes a test set interconnect cable and four
RF cables to connect to the 8753D Option 011.
q Option 009
Substitute mechanical transfer switch
q Option 913
Rack Mount Kit
q 50 ohm S-parameter test set, Agilent 85047A
300 kHz to 6 GHz
Requires the 11857D 7 mm Test Port Return
Cables for two-port device measurements.
Includes a test set interconnect cable and four
RF cables to connect to the 8753D Option 011.
q Option 009
Substitute mechanical transfer switch
q Option 913
Rack Mount Kit
q 50 ohm type-N three-way power splitter, Agilent 11850C
300 kHz to 3 GHz
Requires the 11851B RF Cable Kit.
q 50 ohm type-N two-way power splitter, Agilent 11667A
DC to 18 GHz
Requires the 11851B RF Cable Kit.
For 75 Ohm Device Measurements
q 75 ohm transmission/reflection test set, Agilent 85044B
300 kHz to 2 GHz
Includes one 11852B 50 to 75 ohm minimum
loss pad. Requires the 11851B RF cable kit for
connection to the 8753D Option 011.
q 75 ohm S-parameter test set, Agilent 85046B
300 kHz to 2 GHz
Requires the 11857B 75 ohm test port return
cables. Includes a test set interconnect cable and
four RF cables to connect to the 8753D Option 011.
q Option 009 Substitute mechanical transfer switch
q Option 913 Rack mount kit
q 75 ohm type-N three-way power splitter, Agilent 11850D
300 kHz to 2 GHz
Includes three 11852B 50 to 75 ohm minimum
loss pads for use with the 8753D Option 011
(50 ohms). Requires the 11851B RF cable kit.
Other Accessories
Probe
q High frequency probe, Agilent 85024A
Provides high impedance in-circuit test capability,
from 300 kHz to 3 GHz.
Amplifier
q RF power amplifier, Agilent 8347A
Used to set leveled output power or increase
system dynamic range, from 100 kHz to 3 GHz.
Power Meters
For accurate control of leveled test port power.
Requires an 8480 series power sensor and a GPIB
cable for connection to the 8753D.
q Power meter, Agilent 436A
q Power meter, Agilent 437B
q Dual channel power meter, Agilent 438A
Keyboard
q Keyboard with mini-DIN cable, Agilent C1405B
Option ABA
q Mini-DIN to DIN adapter, part number C1405-60015
The keyboard with cable and adapter can be
connected to the 8753D’s DIN interface to form
a remote front panel and to provide a quicker,
more convenient way to enter titles, labels, and
file names. Both of these parts are required and
must be ordered separately.
System Rack and Related Accessories
q System rack kit, Agilent 85043D
132 cm (52.0 in.) high x 60 cm (23.6 in.) wide
x 90.5 cm (35.6 in.) deep. Supplied with antistatic mat (part number 85043-80013), support
rails, rack mounting hardware, and power
distribution system.
q Option 230 220/240 Volt Operation
q Anti-static mat kit, part number 85043-80013
Retrofit Kits
These kits are used to add additional capability
to the 8753D.
q Harmonic measurement upgrade kit, Agilent 11883A
Includes installation at a local service center.
The serial number of the 8753D to be retrofitted must be specified when ordering this kit.
q 6 GHz upgrade kit for 8753D, Agilent 11884B
Adds Option 006 to an 8753D that does not
have Option 011. Includes installation at a local
service center. The serial number of the 8753D
to be retrofitted must be specified when ordering this kit. Do not use with an 8753D that has
Option 011 or Option 075.
q 6 GHz upgrade kit for 8753D Option 011, Agilent 11884C
Adds Option 006 to an 8753D with Option 011.
Includes installation at a local service center.
The serial number of the 8753D to be retrofitted
must be specified when ordering this kit. Do not
use with an 8753D that has Option 075.
q 6 GHz upgrade kit for 8753D Option 011, Agilent 11884C
Adds Option 006 to an 8753D with Option 011.
Includes installation at a local service center.
The serial number of the 8753D to be retrofitted
must be specified when ordering this kit. Do not
use with an 8753D that has Option 075.
q Time domain upgrade kit, Agilent 85019B
The serial number of the 8753D to be retrofitted must be specified when ordering this kit.
Installation is not included.
q High stability frequency reference retrofit kit, part
number 08753-60236
Installation not included.
5
Upgrade Kits for Other Agilent 8753 Products
These kits are used to upgrade older existing
8753 systems.
q 8753A to 8753B upgrade kit, Agilent 11882A
Includes installation at a local Agilent service
center. The serial number of the 8753A to be upgraded must be specified when ordering this kit.
q Mixer measurement upgrade kit for the 8753C,
Agilent 86387B
Includes installation at a local service center.
Not required for 8753C with Rev. 4.02 or higher
firmware.
q Solid state switch upgrade kit for the 85046A/B,
Agilent 86389A
Includes installation at a local service center.
Requires 8753B/C with Rev. 3.0 or higher
firmware, or 8753D Option 011.
q Solid state switch upgrade kit for the 85047A,
Agilent 86389B
Includes installation at a local service center.
Requires 8753B/C with Rev. 3.0 or higher
firmware, or 8753D Option 011.
Agilent 8753C vs. 8753D Configuration Cross-Reference
The following table provides a summary to help customers who are familiar with the 8753C to decide what
they need to order for an equivalent 8753D system.
6
Type of System
8753C Configuration
8753D Configuration
3 GHz S-parameter (50 ohm)
8753C and 85046A
8753D
6 GHz S-parameter (50 ohm)
8753C Option 006 and
85047A
8753D Option 006
75 ohm S-parameter
8753C and 85046B
8753D Option 075
3 GHz with user-selected test set
8753C and test set
8753D Option 011 and test set
6 GHz with user-selected test set
Not available
8753D Options 006 and 011 and test set
Ordering Information
Agilent 8752C Network Analyzer (300 kHz to 1.3 GHz,
3 GHz, or 6 GHz systems)
q Network analyzer, Agilent 8752C
Integrated network analyzer with built-in color
display, transmission/reflection test set, and
synthesized 300 kHz to 1.3 GHz source. Includes
one type-N male to type-N male test port cable,
whose errors have been removed by the built-in
factory calibration. An operating and programming manual set is included with each instrument.
q Option 003 3 GHz frequency extension
Provides source and receiver operation to 3 GHz.
Do not order both Option 003 and Option 006.
q Option 004 Step attenuator
Provides source output power range from -85
to +10 dBm.
q Option 006 6 GHz frequency extension
Provides source and receiver operation to 6 GHz.
Do not order Option 006 with Option 003 or
Option 075.
q Option 010 Time domain capability
For viewing reflection and transmission responses
in time or distance domain.
q Option 075 75 ohm impedance
Test ports are 75 ohm type-N connectors. Do not
order Option 075 with Option 006.
q Option 802 Add dual disk drive and GPIB cable
q Option AFN Add 50 ohm test port cable
Provides a second type-N male to type-N male
test port cable, part number 8120-5639, and a
type-N female to type-N female adapter, part
number 1250-1472. Instructions are provided
for storing a new internal calibration to account
for the effect of this cable.
q Option AFP Add 75 ohm test port cable
Provides a 75 ohm type-N male to type-N female
cable, part number 8120-2409. Instructions are
provided for storing a new internal calibration
to account for the effect of this cable.
q Option 0B0 Delete operating manual set
q Option 0B1 Add extra operating manual set
q Option 1CM Rack mount kit without handles
q Option 1CP Rack mount kit with handles
q Option 1BN MIL-STD 45662A
Calibration certification
q Option 1BP MIL-STD 45662A
Calibration with test data
q Option UK6 Commercial calibration certificate
with test data
q Option W08 Convert one year on-site warranty
to three-year return-to-Agilent warranty
q Option W31 Two additional years of on-site
service (where available). The following localization options provide manuals that are partially
or completely translated into the specified languages, depending on the region.
q Option AB0 Taiwan - Chinese Localization
q Option AB2 China - Chinese Localization
q Option ABD Germany - German Localization
q Option ABE Spain - Spanish Localization
q Option ABF France - French Localization
q Option ABJ Japan - Japanese Localization
q Option ABZ Italy - Italian Localization
7
Measurement Accessories
Accessories are available in these connector types:
50 ohm type-N, 75 ohm type-N, 3.5 mm, BNC, and
type-F. The Agilent 8752C’s internal error correction compensates for loss and mismatch errors up
to its type-N test ports. For most applications, no
additional calibration is required. External user
calibration is recommended to remove the effects
of cables and adapters that are not part of the
system, or when the highest accuracy is desired.
Calibration kits include standards that are required
for vector accuracy enhancement. Unlike the 8753D
system, the 8752C does not offer a verification kit.
Instead, the Agilent 85032B 50 ohm and 85036B
75 ohm type-N calibration kits can be used to verify
the performance of these systems.
Calibration Kits
Choose a kit for each connector type to be used.
q 50 ohm type-N calibration kit, Agilent 85032B
Contains fixed loads, open and short circuits,
and 7 mm to type-N adapters for both connector
sexes. This kit is also used to verify the 8752C
system performance.
q Option 001
Deletes 7 mm to type-N adapters
These adapters are not needed when this kit
is used exclusively with an 8752C system.
q 3.5 mm calibration kit, Agilent 85033D
Contains fixed loads, one-piece open and short
circuits, and 7 mm to 3.5 mm adapters for both
connector sexes.
q Option 001
Deletes 7 mm to 3.5 mm adapters
These adapters are not needed when this kit
is used exclusively with an 8752C system.
q 75 ohm type-N calibration kit, Agilent 85036B
Contains 75 ohm fixed loads, open/short circuits,
and 75 ohm type-N adapters of both sexes. This
kit is also used to verify the 8752C Option 075
system performance.
q Type-F calibration kit, Agilent 85039A
Contains fixed load, open and short circuits,
type-F female to type-F female adapter, and
75 ohm type-N to type-F adapters.
8
Adapters
q 50 to 75 ohm minimum loss pad (300 kHz to 2 GHz),
Agilent 11852B
Adapts from 50 ohm type-N female to 75 ohm
type-N male. Nominal insertion loss is 5.7 dB.
q Option 004
Provides 50 ohm type-N male and
75 ohm type-N female connectors
q 50 ohm type-N accessory kit, Agilent 11853A
Contains type-N male to type-N male adapters,
type-N female to type-N female adapters, and
type-N male and female shorts.
q 50 ohm BNC accessory kit, Agilent 11854A
Contains type-N to BNC adapters and a BNC
male short.
q 75 ohm type-N accessory kit, Agilent 11855A
Contains 75 ohm type-N male to type-N male
adapters, type-N female to type-N female adapters,
type-N male and female shorts, and type-N male
termination.
q 75 ohm BNC accessory kit, Agilent 11856A
Contains 75 ohm type-N to 75 ohm BNC adapters
for both connector sexes, a BNC male short, and
BNC male termination.
q 3.5 mm adapter kit, Agilent 11878A
Contains 50 ohm type-N to 3.5 mm adapters.
q Input/output control adapter, part number 08752-60020
Attaches to the “test set interconnect” on the
rear panel of the 8752C to allow access to
general purpose input/output signal lines.
Female SMB connectors are provided for four
TTL outputs, one TTL input, an end-of-sweep
output, and a limit test output.
Test Port Cables
q 50 ohm type-N test port cable, part number 8120-5639
(both connectors are type-N male)
q 75 ohm type-N test port cable, part number 8120-2408
(both connectors are type-N male)
q 75 ohm type-N test port cable, part number 8120-2409
(one male, one female connector)
Other Accessories
Retrofit Kits
These kits are used to add additional capability to
the Agilent 8752C.
q 3 GHz frequency extension upgrade kit, Agilent 11885A
Includes installation at a local Agilent service
center. The serial number of the 8752C to be
retrofitted must be specified when ordering
this kit.
q 6 GHz upgrade kit for the 8752C, Agilent 11884D
Includes installation at a local Agilent service
center. The serial number of the 8752C to be
retrofitted must be specified when ordering this
kit. Do not use with an 8752C that has Option 075.
q Time domain retrofit kit, Agilent 85019C
The serial number of the 8752C to be retrofitted
must be specified when ordering this kit.
Installation not included.
q Step attenuator retrofit kit, part number 08752-60019
Installation is not included.
Peripherals
The following peripherals may be used with either
the 8753D or the 8752C. Other peripherals not listed
here may also be compatible with these instruments.
Monitors
q 12" Medium resolution color monitor, HP 35741A
q 12" Medium resolution color monitor, HP 35741B
(international)
Printers
An external computer is not required to copy or
list data from the analyzer’s display to a printer.
Some printers have options to specify the interface.
Consult your local Agilent Technologies office for
more details. Other printers not listed here may
also be compatible.
q
q
q
q
q
DeskJet 520 printer, HP C2170A
DeskJet 560C printer, HP C2168A
DeskJet 310 portable InkJet printer, HP C2621A
PaintJet color graphics printer, HP 3630A
LaserJet series 4 printer, HP C2001A
Disk Drives
Measurement data, instrument states, calibration
data, and test sequences may be stored directly
to an external disk drive without the aid of a computer. The 8753D has a built-in disk drive, but an
external disk drive can be added. The 8752C and
8753D are compatible with CS80 format drives,
such as the ones listed here.
q 3.5 in. dual disk drive, Agilent 9122C
May be ordered as 8752C Option 802.
q Winchester disk drive, Agilent 9153C
q Option 020
20 Mbyte Winchester hard drive with 3.5 in.
floppy disk drive
Plotters
An external computer is not required to copy the
analyzer’s display to a plotter.
q Six-Pen Graphics Plotter, HP 7475A Option 002
ISO A4 and A3 or 8.5 x 11 in. and 11 x 17 in.
chart sizes. Option 002 specifies a GPIB interface.
q Eight-Pen Graphics Plotter, HP 7550B
ISO A4 and A3 or 8.5 x 11 in. and 11 x 17 in.
chart sizes.
9
Interface Cables
Choose the appropriate cables to connect each
peripheral to the network analyzer.
q GPIB Cable, Agilent 10833A
1.0 m (3.3 ft.)
q GPIB Cable, Agilent 10833B
2.0 m (6.6 ft.)
q GPIB Cable, Agilent 10833D
0.5 m (1.6 ft.)
q Centronics (Parallel) Printer Cable, Agilent 92284A,
2.0 m (6.6 ft.)
q RS-232C Printer Cable, Agilent C2913A
1.2 m (3.9 ft.)
q Serial Plotter Cable, Agilent C2914A
1.2 m (3.9 ft.)
10
Printer Interface Adapter
Adapts the 8752C’s GPIB interface for connection
to parallel printers or plotters. Not required for the
8753D since it has a built-in Centronics parallel
interface.
q GPIB to Parallel Interface Converter, ITEL-45CHVU
U.S. and Canada version. Converts GPIB to
Centronics parallel interface for connecting
to printers.
q GPIB to Parallel Interface Converter, ITEL-45CHVE
International version. Converts GPIB to Centronics
parallel interface for connecting to printer.
Service and Support Products
The 8752C and 8753D include a one-year on-site
service warranty at no extra charge. On-site service
may not be available in all areas. Return-to-Agilent
service is provided where on-site service is unavailable. Customers may convert the standard one-year
on-site warranty to a three-year return-to-Agilent
warranty by ordering Option W08. Option W08 must
be specified at the time of the analyzer’s purchase.
Selected service and support products are listed
below. For more information on training, service,
and support products for these analyzers, consult
your local Agilent sales and service office.
Follow-on On-site Service
q Option W31, Agilent 8752C
Two Additional Years of On-site Service
q Option W31, Agilent 8753D
Two Additional Years of On-site Service
Option W31 adds two additional years of
on-site support to the analyzer's normal
one-year on-site warranty.
q Option W51, Agilent 8752C
Four Additional Years of On-site Service
q Option W51, Agilent 8753D
Four Additional Years of On-site Service
Option W51 adds four additional years of
on-site support to the analyzer's normal
one-year on-site warranty.
Calibration Agreements
q Option W32, Agilent 8752C
Three Year Customer Return Calibration
Agreement
q Option W32, Agilent 8753D
Three Year Customer Return Calibration
Agreement
Option W32 provides return-to-Agilent commercial calibration in the second and third year,
plus full calibration after any repair provided
by Agilent for three full years.
q Option W34, Agilent 8752C
Three Year Customer Return Standards-Compliant
Calibration Agreement
q Option W34, Agilent 8753D
Three Year Customer Return Standards-Compliant
Calibration Agreement
Option W34 provides return-to-Agilent standardscompliant calibration in the second and third
year, plus full calibration after any repair provided by Agilent for three full years.
11
Agilent Technologies’ Test and Measurement
Support, Services, and Assistance
Agilent Technologies aims to maximize the value you receive,
while minimizing your risk and problems. We strive to ensure
that you get the test and measurement capabilities you paid
for and obtain the support you need. Our extensive support
resources and services can help you choose the right Agilent
products for your applications and apply them successfully.
Every instrument and system we sell has a global warranty.
Support is available for at least five years beyond the production life of the product. Two concepts underlie Agilent’s
overall support policy: “Our Promise” and “Your Advantage.”
Our Promise
“Our Promise” means your Agilent test and measurement equipment will meet its advertised performance and functionality.
When you are choosing new equipment, we will help you with
product information, including realistic performance specifications and practical recommendations from experienced test
engineers. When you use Agilent equipment, we can verify that
it works properly, help with product operation, and provide
basic measurement assistance for the use of specified capabilities, at no extra cost upon request. Many self-help tools are
available.
Your Advantage
“Your Advantage” means that Agilent offers a wide range of
additional expert test and measurement services, which you
can purchase according to your unique technical and business
needs. Solve problems efficiently and gain a competitive edge
by contracting with us for calibration, extra-cost upgrades, outof-warranty repairs, and on-site education and training, as well
as design, system integration, project management, and other
professional services. Experienced Agilent engineers and technicians worldwide can help you maximize your productivity,
optimize the return on investment of your Agilent instruments
and systems, and obtain dependable measurement accuracy
for the life of those products.
By internet, phone, or fax, get assistance with all your
test and measurement needs.
Online Assistance
www.agilent.com/find/assist
Phone or Fax
United States:
(tel) 1 800 452 4844
Canada:
(tel) 1 877 894 4414
(fax) (905) 206 4120
Europe:
(tel) (31 20) 547 2323
(fax) (31 20) 547 2390
Japan:
(tel) (81) 426 56 7832
(fax) (81) 426 56 7840
Latin America:
(tel) (305) 269 7500
(fax) (305) 269 7599
Australia:
(tel) 1 800 629 485
(fax) (61 3) 9272 0749
New Zealand:
(tel) 0 800 738 378
(fax) (64 4) 495 8950
Asia Pacific:
(tel) (852) 3197 7777
(fax) (852) 2506 9284
Product specifications and descriptions in this
document subject to change without notice.
Copyright © 1994, 2000 Agilent Technologies
Printed in U.S.A. 10/00
5962-9771E
Open as PDF
Similar pages