ACD-2100T 1-channel MPEG-4 Video Encoder

1-channel MPEG-4 Video Encoder
ACD-2100T
Ver. 080619+
User’s Manual
0-0
0
0
1.
2.
3.
PRECAUTIONS
Read these instructions
All the safety and operating instructions should be read before the product is
operated.
Heed all warnings
All warnings on the product and in the instruction manual should be adhered to.
The symbol indicates the following items, please carefully read the
description next to each symbol.
a. Failure to follow the safety instruction given may directly endanger
people, cause damage to the system or to other equipment.
b. The requirements to make this device work, including hardware,
computer settings, network settings, and operation procedures.
c. The tips to make using this device easier, more convenient and more
efficient.
Servicing
Do not attempt to service this video product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
Trademarks
All names used in this manual for hardware and software are probably registered
trademarks of respective companies.
Liability
Every care has been taken during writing this manual. Please inform your local office
if you find any inaccuracies or omissions. We cannot be held responsible for any
typographical or technical errors and reserve the right to make changes to the product
and manuals without prior notice.
FCC/CE Regulation
NOTE: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses,
0-1
and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
0-2
Table of Contents
0
PRECAUTIONS................................................................................................ 0-1
Trademarks ..................................................................................................................................0-1
Liability ........................................................................................................................................0-1
FCC/CE Regulation .....................................................................................................................0-1
1
INTRODUCTION ............................................................................................. 1-1
1.1
Package Contents ................................................................................................ 1-1
1.2
Features and Benefits.......................................................................................... 1-2
1.3
Safety Instructions .............................................................................................. 1-4
1.4
Physical Description............................................................................................ 1-6
1.5
Mounting the Video Encoder ............................................................................. 1-9
1.6
Basic Connections ............................................................................................. 1-10
1.7
Product Specification ........................................................................................ 1-11
0-1
11
1.1
INTRODUCTION
Package Contents
ACD-2100T
Software CD
Warranty Card
Terminal Blocks & Screws
Power Adaptor (Option)
1-1
1.2
Features and Benefits
This 1-channel MPEG-4 Video Encoder is a cutting-edge digital video
transmission device. It can compress and transmit real time images with
outstanding images quality (D1, 720x480) at reasonable bandwidth through
a standard TCP/IP network. That is because it is Ethernet ready and has the
powerful ARM9 SoC and the MPEG-4 compression ASIC inside. In
addition, with these powerful hardware platform, excellent SDK support
and powerful respective apparatuses (e.g. the transcoder), this 1-channel
MPEG-4 Video Encoder is your best choice building up either conventional
IP surveillance system or intelligent IP surveillance system.
Real-time MPEG-4 Compression
With hardware MPEG-4 compression chip inside, the composite video
inputs can be efficiently compressed into MPEG-4 bit stream without
any delay. The ASIC base compression engine can support not only
CIF, but also FULL D1 image resolution.
Digital Time Code Embedded
The “Digital Time Code Embedded” function is to embed the
recording time in the MPEG bit stream. Therefore, each image frame
has its respective time when it was recorded. It is very useful when
users want to find the video at an exact time or between a certain time
intervals.
DDNS Supported
This 1-channel MPEG-4 Video Encoder supports DDNS (Dynamic
Domain Name Server), users can set this 1-channel MPEG-4 Video
Encoder at a virtual domain name (such as cam1.Taipei.xxx) at
dynamic IP. Everyone can use the virtual domain name to view the
video anywhere that has the access to the internet.
Build-in Hardware Motion Detection
No more external motion sensors are required. Each 1-channel
MPEG-4 Video Encoder can be set up to 3 detection areas. By tuning
the object size and sensitivity, it is very reliable to fit into your
environment. Besides, hardware motion detection delivers better
sensitivity and responds faster than software motion detection.
Bundle Powerful Surveillance Software
To extend the capabilities of the IP outdoor rugged dome series, a
1-2
powerful surveillance program is included in the package and is very
free to use. Users can easily utilize the existing PC to be a digital video
recorder. Schedule recording and manual recording keep every
important image recorded in the local hard disk. Reliable and accurate
motion detection with instant warning makes you responsive in every
condition. Quick and simple search and playback function lets you
easily find the images you want.
Software Development Kit Support
This 1-channel MPEG-4 Video Encoder can be integrated or controlled
by user’s application program through the Streaming Library or
ActiveX control. With its high level programming interface, software
developer’s time and efforts to is highly reduced.
1-3
1.3
Safety Instructions
Don’t use the power supply with other voltages
This device is likely to be damaged or damage other equipments /
personnel, if you use a power supply with different voltage than the
one included with this device. All warranty of this product will be
voided in the situations above.
Don’t open the housing of the product
Cleaning
Disconnect this video product from the power supply before cleaning.
Attachments
Do not use attachments not recommended by the video product
manufacturer as they may cause hazards.
Water and Moisture
Do not use this video product near water, for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool and the like.
Don’t use accessories not recommended by the manufacturer

Only install this device and the power supply in a dry place
protected from weather
 Servicing
Do not attempt to service this video product yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
Damage Requiring service
Disconnect this video product from the power supply immediately and
refer servicing to qualified service personnel under the following
conditions.
1.
When the power-supply cord or plug is damaged.
2.
If liquid has been spilled, or objects have fallen into the video
product.
3.
If the video product has been exposed to rain or water directly.
1-4
4.
If the video product does not operate normally by following the
operating Instructions in this manual. Adjust only those controls
that are covered by the instruction manual as an improper
adjustment . Other controls may result in damage and will often
require extensive work by a qualified technician to restore the
video product to its normal operation.
Safety Check
Upon completion of any service or repairs to this video product, ask
the service technician to perform safety checks to determine that the
video product is in proper operating condition.
1-5
1.4
Physical Description
1.
Video Input / Outpu
The Video Encoder supports one analog video input and output of
composite signal with BNC connectors
2.
Audio Input / Output
The Video Encoder supports one audio input and output with
earphone jack
3.
Dip Switch for Serial Port
RS-485 or RS-422 pin define (default is RS-485)
RS-232 pin define
4.
Action LED Indicator
The LED will light up after Video Encoder has successfully
completed the boot process.
5.
Serial Port LED Indicator
LEDs indicating when serial port is active.
6.
Reset Button
Step 1: Switch off Video Encoder by disconnecting the power
1-6
cable
Step 2: Using a suitable pointed object, press and continue to hold
the Reset Button depressed. While continuing to hold the reset
button depressed, reconnect the power cable.
Step 3: Keep holding the reset button depressed around 6 seconds,
release the reset button. The unit will start up with factory default
settings.
7.
Terminal Blocks Pin 1~6
The Video Encoder supports two alarm input and two alarm
output. DI: Logic Level 0: 0~0.4V; Logic Level 1: 3.3~30V
DO: Logic Level 0: 0.1~0.6V; Logic Level1: 2.4~5V
Please find Support package” TS-00045” for details.
PIN
1
2
3
4
5
6
8.
NAME
DO1
DO2
GND
DI1
DI2
GND
DESCRIPTION
Digital Output 1
Digital Output 2
Ground Pin
Digital Input 1
Digital Input 2
Ground Pin
Terminal Blocks Pin 7~12
Pin 7~10: RS232/422/485. Default mode is RS-485
Pin 11~12: DC 12V power input
PIN
NAME
7
8
9
10
Tx+
TxRx+
Rx-
DESCRIPTION
RS-485
RS-422
RS-232
D+
Tx+
Tx
DTxRx+
Rx
Rx1-7
9.
11
12V
12
GND
Power Input (DC +12V)
Ground Pin of Power Input &
RS-232
Ethernet Port
The Video Encoder connects to the Ethernet via a standard RJ45
connector. Supporting NWAY, this 1-channel MPEG-4 Video
Encoder can auto detect the speed of local network segment
(10Base-T/100Base-TX Ethernet).
1-8
1.5
Mounting the Video Encoder
1-9
1.6
Basic Connections
Follow the procedures below to connect the 1-channel MPEG-4 Video
Encoder to the respective apparatuses.
1. Connect an analog monitor to Video Encoder video out (BNC connector).
2. Connect the power adaptor to Video Encoder
3. Connect Video Encoder’s ethernet port to an Ethernet (RJ45 connectors)..
4. Connect a PC to the Ethernet hub (RJ45 connectors)
1-10
1.7
Product Specification
ACD-2100T
-22˚F ~ 158˚F (-30˚C ~ 70˚C)
1-11
Open as PDF
Similar pages