362Z
Installation Guide
Intelligent Video Surveillance
GUI Display with USB Mouse Control
Please read instructions thoroughly before operation and retain it for future reference.
For the actual display & operation, please refer to your DVR in hand.
799B_797B_794B_Quick_V0.9
Dear Customers,
Thank you for choosing this innovative IVS DVR, one series of IVS system products.
From this moment, you are entering into a new era of security guard, and more
convenient and surprising features are presented to suit your versatile needs.
IVS DVR series is integrated with the mobile technology to not only realize the
instance of event notifications, but also increase the mobility of surveillance.
For powerful mobile surveillance support, our self-developed mobile phone
program, “EagleEyes”, compatible on many popular mobile platforms, such as
iPhone®, BlackBerry®, Nokia® Symbian®, Windows® Mobile & Android™, is free
to download from your mobile phone for remote access and device control.
In addition to mobile phones, remote access via different PC software is also
widely supported:
For web browsers, Internet Explorer®, Mozilla® Firefox®, Mac® Safari® and Google
Chrome™ are supported.
Apple’s media player, QuickTime®, is also one tool you can use.
Above all, our powerful CMS software allows you to centrally manage multiple
devices in one interface and control all situations.
To know more about IVS system and EagleEyes, and where to download EagleEyes,
please visit:
http://www.eagleeyescctv.com
To know more about feature applications, please visit:
http://www.eagleeyescctv.com/video
To seek for technical support, please contact:
support@avtech.com.tw
To give us your precious suggestions and comments, please contact:
marketing@avtech.com.tw
IMPORTANT SAFEGUARD
CAUTION
RISK OF ELECTRIC SHOCK
CAUTION:
To reduce the risk of electric shock, do not expose this apparatus to rain or moisture. Only operate this apparatus
from the type of power source indicated on the label. The company shall not be liable for any damages arising out
of any improper use, even if we have been advised of the possibility of such damages.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
This exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the appliance.
All lead-free products offered by the company comply with the requirements of the European law on the Restriction of Hazardous
Substances (RoHS) directive, which means our manufacture processes and products are strictly “lead-free” and without the
hazardous substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected separately at the
product end-of-life. This applies to your product and any peripherals marked with this symbol. Do not dispose of these products as
unsorted municipal waste. Contact your local dealer for procedures for recycling this equipment.
This apparatus is manufactured to comply with the radio interference requirements.
Trademark Acknowledgements
and
(EagleEyes) - The trademark application is filed and under process in the U.S. and other countries.
iPhone® is the registered trademark of Apple Inc., and Apple holds the intelligential property rights to the iPhone content.
BlackBerry® and related trademarks, names and logos are the property of Research In Motion Limited and are registered and/or used in the U.S.
and countries around the world. Used under license from Research In Motion Limited.
Android™ is a trademark of Google Inc. Use of this trademark is subject to Google Permissions.
Microsoft®, Windows®, Internet Explorer®, Mozilla® FireFox®, Google Chrome™, QuickTime®, Windows® Mobile & Symbian® mentioned in
this document are the registered trademarks of their respective holders.
Disclaimer
The information in this manual was current when released. We reserve the right to revise or remove any content in this manual at any time. We
do not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of this manual. For the actual display
& operation, please refer to your DVR in hand. The content of this manual is subject to change without notice.
Grounding
This is a Safety Class 1 Product (provided with a protective earthing ground incorporated in the power cord). The mains plug shall only be
inserted in a socket outlet provided with a protective earth contact. Any interruption of the protective conductor inside or outside of the instrument
is likely to make the instrument dangerous. Intentional interruption is prohibited.
Water & Moisture
Do not expose this product to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the product.
MPEG4 Licensing
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND
NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD
(“MPEG-4 VIDEO”) AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND
NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4
VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT
RELATING TO PROMOTIONAL INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE
HTTP://WWW.MPEGLA.COM.
GPL Licensing
This product contains codes which are developed by Third-Party-Companies and which are subject to the GNU General
Public License (“GPL”) or the GNU Lesser Public License (“LGPL”).
The GPL Code used in this product is released without warranty and is subject to the copyright of the corresponding
author.
Further source codes which are subject to the GPL-licenses are available upon request.
We are pleased to provide our modifications to the Linux Kernel, as well as a few new commands, and some tools to get
you into the code. The codes are provided on the FTP site, and please download them from the following site or you
can refer to your distributor:
http://download.dvrtw.com.tw/GPL/076D_Series/arm-linux-2.6.tar.gz
TABLE OF CONTENTS
1. PRODUCT OVERVIEW ..................................................................................................................... 1
2. CONNECTION AND SETUP.............................................................................................................. 2
2.1 Prerequisites ..........................................................................................................................................................2
2.2 SATA HDD Installation............................................................................................................................................2
2.3 Installing DCCS Camera ........................................................................................................................................3
2.4 Connecting DCCS Camera ....................................................................................................................................3
2.5 DVR Power On ......................................................................................................................................................4
2.6 Date and Time Setting............................................................................................................................................4
2.7 Clear Hard Disk......................................................................................................................................................4
2.8 Password Setting ...................................................................................................................................................5
2.9 Examining Signal Transmission .............................................................................................................................5
2.10 Configuring DCCS Camera..................................................................................................................................6
2.10.1 For a PTZ camera .....................................................................................................................................6
2.10.2 For a zoom lens control camera................................................................................................................6
3. GUI DISPLAY WITH USB MOUSE CONTROL ................................................................................. 7
3.1 Connect USB Mouse..............................................................................................................................................7
3.2 Quick Menu Bar .....................................................................................................................................................7
3.3 Main Menu .............................................................................................................................................................8
4. FRONT AND REAR PANELS .......................................................................................................... 10
4.1 Front Panel ..........................................................................................................................................................10
4.2 Rear Panel ...........................................................................................................................................................11
5. BASIC OPERATION ........................................................................................................................ 12
5.1 Live Page .............................................................................................................................................................12
5.2 Record Icon..........................................................................................................................................................12
5.3 Playback ..............................................................................................................................................................12
Playback Control................................................................................................................................................13
Event Search .....................................................................................................................................................13
Audio Playback ..................................................................................................................................................13
5.4 User Level Switch ................................................................................................................................................13
5.5 VGA Output Resolution Support ..........................................................................................................................14
APPENDIX 1. SET IPHONE PUSH NOTIFICATION ........................................................................... 15
A1.1 Prerequisite .......................................................................................................................................................15
A1.2 Set iPhone .........................................................................................................................................................15
A1.2.1 Program Download .................................................................................................................................15
A1.2.2 Program Setup .......................................................................................................................................16
A1.2.3 Push Notification On ...............................................................................................................................17
APPENDIX 2. SET FLOW COUNTING / VIRTUAL FENCE / ONE-WAY PASS ................................. 18
A2.1 IVS APPLICATION.............................................................................................................................................19
A2.1.1 FLOW COUNTING .................................................................................................................................19
A2.1.2 VIRTUAL FENCE and ONE WAY ...........................................................................................................20
A2.2 IVS STATISTICS................................................................................................................................................21
1. PRODUCT OVERVIEW
1
2. CONNECTION AND SETUP
Before the DVR is powered on, make sure you have installed a hard disk, connected at least one camera and a
monitor. For details, please refer to the following sections.
Note: The DVR is designed to automatically detect the video system of the connected cameras (NTSC or
PAL). To make sure the system detection is correct, please check if the cameras are connected to
the DVR and power-supplied before the DVR is powered on.
Note: The connection and setup described below are for DCCS devices only. For details about connecting
cameras other than DCCS ones, please refer to the DVR user manual.
2.1 Prerequisites
Make sure your cameras support the DCCS function. For details, please check with your distributor or
installer.
To ensure the signal transmission, the recommended distance between this DVR and cameras should not
exceed 200 meters by using 3C2V coaxial cables (112 braids).
However, different materials used in 3C2V coaxial cables with different connection distance may cause some
effects for the availability and fluency of signal transmission.
Therefore, please do the DCCS test as instructed in “2.9 Examining Signal Transmission” at page 5 when the
connection is completed to ensure this system can work normally.
It’s not allowed to use a signal booster or modem to amplify signals and extend the connection distance.
The DCCS function doesn’t support the channel which is looped from a DCCS camera connected to the same
DCCS DVR or to other DCCS DVR.
2.2 SATA HDD Installation
A SATA HDD must be installed before the DVR is powered on.
Note: It’s recommended to clear all data in the hard disk when the DVR is powered on and the date &
time are set correctly to ensure the recorded data are not mixed with other data previously saved
in the same hard disk. For details, please refer to “2.7 Clear Hard Disk” at page 4.
For AVC799B & AVC797B
Step1: Loose the screws on the upper cover and open the upper cover of the DVR.
Note: The DVR cover is made of metal. Please be careful with its edge when you remove the cover.
Step2: There are two HDD brackets for this DVR as indicated on
the right picture.
2-1 To install on the first bracket
Remove the bracket, and align the screw holes of the
bracket with the HDD’s screw holes. Make sure the
PCB side of the HDD is facing up.
Fasten the HDD to the bracket, and connect the power
connector and data bus connector to the HDD. Then,
replace the bracket to DVR.
2
2-2 To install on the second bracket
Connect the power connector and data bus connector
to the HDD.
When connecting the power cable, make sure the cable
is passed through the power cable of DVD writer. This
is to prevent the HDD power cable from interfering with
the fan spinning.
Align the screw holes of the bracket with the HDD’s
screw holes. Make sure the PCB side of the HDD is
facing up. Then, fasten the HDD to the bracket.
Step3: Close the upper cover of the DVR, and fasten all the screws you loosened in Step1.
For AVC794B
Step1: Remove the screws on the top cover of DVR, and remove the top cover.
Step2: Remove the HDD bracket. Then, with the PCB side facing up, connect the compatible HDD to the power
connector and data bus connector.
Step3: Put the compatible HDD in the bracket, and fasten it with the supplied screws, two for each side.
Step4: Replace the bracket back to the DVR.
Step5:
Replace the top cover and fasten the screws you loosened in Step1.
2.3 Installing DCCS Camera
Install the camera on the wall or ceiling based on your installation environment and camera type. For installation
details, please refer to the user manual of your camera.
Note: The distance between the camera and DVR needs to be within 200 meters for DCCS control to take
effects. For details, please refer to “2.1 Prerequisites” at page 2.
2.4 Connecting DCCS Camera
The cameras must be connected and power-supplied before the DVR is powered on. Connect the camera with
the indicated power supply. Then, connect the camera video output to the DVR video input port with a coaxial
cable or RCA cable with BNC connectors.
Note: For AVC799B, only channel 1 ~ 4 support DCCS camera connection;
For AVC797B, only channel 1 & 2 support DCCS camera connection;
For AVC794B, only channel 1 supports DCCS camera connection.
1) Video cable connection
Connect the camera video output to the DVR video input port with a coaxial cable or RCA cable with BNC
connector.
3
2) Power connection
Connect the camera with indicated power supply and make sure it’s power-supplied.
2.5 DVR Power On
This device should be operated only with the type of power source indicated on the manufacturer’s label. Connect
the indicated AC power cord to the power adapter, and plug into an electrical outlet. The power LED will be on.
Note: Before the DVR is powered on, make sure (1) the cameras are connected and power-supplied for
the detection of the camera video system to be correct, and (2) a monitor (either LCD or CRT
monitor) is connected to the DVR for correct video output detection.
Note: To ensure that your DVR works constantly and properly, it's recommended to use an UPS,
Uninterruptible Power Supply (Optional), for continuously operation.
2.6 Date and Time Setting
Before operating your DVR, please set the date and time on your DVR FIRST.
Note: Please DO NOT change the date or time of your DVR after the recording function is activated.
Otherwise, the recorded data will be disordered and you will not be able to find the recorded file
to backup by time search. If users change the date or time accidentally when the recording
function is activated, it’s recommended to clear all HDD data, and start recording again.
Note: For the first time to use the DVR, please power it on for at least 48 hours continuously after the
date & time is set correctly. It helps to prevent DVR time from resetting after the disconnecting of
DVR power. If the DVR time resets after the disconnecting of DVR power, for example, caused by
a power outage, the battery might run out and please replace the battery as described in
“APPENDIX 6” in the DVR user manual.
Right-click to enter the DVR password with the password keypad. The default administrator password is 0000.
The status will be changed from
(key lock) to
(administrator). Then, right-click to show the main menu,
and select “QUICK START”
“TIME SETUP” to set the date & time.
QUICK START
GENERAL
TIME SETUP
DATE
2009 / NOV / 17
TIME
15 : 35 : 53
EXIT
2.7 Clear Hard Disk
It’s recommended to clear all data in the hard disk for the first time to user this DVR to ensure the recorded data
are not mixed with other data previously saved in the same hard disk.
Right-click to show the main menu, and select “SYSTEM”
“SYSTEM INFO”
“CLEAR HDD”. The DVR will
reboot when HDD data are cleared. For details, please refer to “5.3.2 SYSTEM INFO” in the DVR user manual.
4
SYSTEM
TOOLS
SYSTEM INFO
USB BACKUP
DVD BACKUP
BAUD RATE
HOST ID
R.E.T.R
AUTO KEY LOCK
CLEAR HDD
RESET DEFAULT
REMOTE CONTROL ID
2400
000
5
NEVER
HDD-0
SUBMIT
000
SERIAL TYPE
RS485
VIDEO FORMAT
NTSC
VERSION
1019-1008-1010-1010
EXIT
2.8 Password Setting
Right-click to show the main menu, and select “SYSTEM”
“TOOLS” to change the DVR password.
There are two user levels: ADMIN & OPERATOR. For details, please refer to “5.3.1 TOOLS” in the DVR user
manual.
SYSTEM
TOOLS
SYSTEM INFO
USB BACKUP
DVD BACKUP
LANGUAGE
ADMIN PASSWORD
OPERATOR PASSWORD
UPGRADE
BACKUP CONFIG
RESTORE CONFIG
ENGLISH
SETUP
SETUP
SUBMIT
SUBMIT
SUBMIT
EXIT
2.9 Examining Signal Transmission
Right-click to display the main menu, and select “ADVANCED CONFIG” “DCCS”.
ADVANCED CONFIG
CANERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
DEVICES
DCCS
IVS
NOTIFY
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 W
DIAGNOSTIC
START
MENU
SETUP
DEVICE
AVK523
CONNECTION
OK
X
EXIT
1) Make sure the model number of your DCCS camera is shown in “DEVICE”. If not, please check your camera
connection.
2) Select the channel which connects to your DCCS camera, and click “START” in “DIAGNOSTIC” to examine
the signal transmission between the DCCS camera and the DVR.
5
3) In “CONNECTION”, it shows the examining result for DCCS signal transmission between the DVR and
camera. The message is as follows:
MESSAGE SHOWN
MEANING
CHECKING
The DVR is checking the DCCS signal transmission between the DVR
and camera.
OK
The signal transmission is fine and the DCCS function works properly.
FAIL
The signal transmission is too weak or not available for the DCCS
function to work properly.
2.10 Configuring DCCS Camera
DCCS cameras have three types: PTZ cameras, zoom lens control cameras, and human detection cameras.
Based on the camera type, different camera settings are needed as described below.
Note: iPhone Push Notification is available only when a human detection camera is connected properly
to the correct channel which supports DCCS. For iPhone Push Notification to work properly, please
refer to “APPENDIX 1. SET IPHONE PUSH NOTIFICATION” at page 15.
2.10.1 For a PTZ camera
Switch to the channel which connects to your PTZ camera, and click “
” on the quick menu bar to
display the PTZ control panel.
Configure the camera by clicking “
”. For camera configuration details, please refer to its user manual.
2.10.2 For a zoom lens control camera
In the “DCCS” menu, move to the channel which connects to the zoom lens control camera, and click
“SETUP” in “MENU”.
ADVANCED CONFIG
CANERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
DEVICES
DCCS
IVS
NOTIFY
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 W
DIAGNOSTIC
START
MENU
SETUP
DEVICE
AVK523
CONNECTION
OK
X
EXIT
Different zoom lens control cameras might have different parameter settings. For details, please refer to
their own user manuals.
6
3. GUI DISPLAY WITH USB MOUSE CONTROL
3.1 Connect USB Mouse
Connect your USB mouse to one of the USB ports on the DVR front panel, and check if there’s a mouse icon (
on the screen, indicating the USB mouse is detected properly.
)
Move your mouse to enter the DVR password with the password keypad. The default administrator password is
0000. The status will be changed from
the left side of the screen.
(key lock) to
(administrator), and the quick menu bar appears on
Note: There are two user levels for DVR access which can be set in the main menu “SYSTEM”
“TOOLS”.
For details, please refer to your user manual.
Password Input
Quick Menu: Close
3.2 Quick Menu Bar
Move to the arrow mark to extend the quick menu bar and show the six functions as follows:
Quick Menu: Open
Click to show the channel switch panel and select the channel you want.
For details, please refer to “3.2 Quick Menu Bar” in the user manual.
Click to display the playback control panel, and click
to play the
latest recorded video clip, or click
to enter the search list.
Switch to the channel you want first, and click
to enter the zoom-in
mode. In this mode, click and drag the red frame on the bottom left of the
screen to move to the place you want to see. To exit this mode, click 7.
Click to select the audio channel you want:
In the live mode, only the live audio channels can be selected.
In the playback mode, live and playback audio channels can be selected.
Click to enter the PTZ mode and show the PTZ camera control panel.
Click to show the power off panel to either halt or reboot the system.
7
3.3 Main Menu
Right-click anywhere on the screen to show the main menu as follows, and right-click again to exit.
Main Menu
QUICK START
Click to set the status display, image settings, and date &
time.
DATE SETUP
Click to set the date display and daylight saving.
SYSTEM
Click to set the system configurations.
EVENT INFORMATION
Click to enter the event search menu.
ADVANCED CONFIG
Click to set CAMERA, DETECTION, ALERT,
NETWORK, DISPLAY, RECORD, DEVICES, DCCS, IVS
& NOTIFY.
SCHEDULE SETTING
Click to set record timer and detection timer.
Main Menu Structure
QUICK START
GENERAL
CHANNEL TITLE
EVENT STATUS
DATE DISPLAY
RECORD CONFIGURATION
TIME SETUP
DATE
TIME
DATE SETUP
DATE INFO
DISPLAY DATE OF MODE
FORMAT
SYSTEM
DAYLIGHT
DAYLIGHT SAVING
TOOLS
LANGUAGE
ADMIN PASSWORD
OPERATOR PASSWORD
UPGRADE
BACKUP CONFIG
RESTORE CONFIG
SYSTEM INFO
BAUD RATE
HOST ID
R.E.T.R.
AUTO KEY LOCK
CLEAR HDD
RESET DEFAULT
REMOTE CONTROL ID
SERIAL TYPE
VIDEO FORMAT
VERSION
USB BACKUP
EVENT INFORMATION
QUICK SEARCH
EVENT SEARCH
HDD INFO
EVENT LOG
ADVANCED CONFIG
CAMERA
BRIGHTNESS
CONTRAST
SATURATION
HUE
8
ADVANCED CONFIG
CAMERA
COV.
REC
CHANNEL TITLE
DETECTION
LS
SS
TS
MOTION
ALARM
AREA
ALERT
EXT. ALERT
INT. BUZZER
KEY BUZZER
VLOSS BUZZER
MOTION BUZZER
ALARM BUZZER
HDD BUZZER
ALARM DURATION (SEC)
HDD NEARLY FULL (GB)
NETWORK
NETWORK
SNTP
FTP
E-MAIL
DISPLAY
DE-INTERLACE (For AVC799B & 797B Only)
FULL SCREEN DURATION
QUAD SCREEN DURATION (For AVC799B & 797B Only)
DWELL SCREEN DURATION
DISPLAY COVERT
HDD DISPLAY MODE
ALPHA BLENDING
VGA OUTPUT
RECORD
MANUAL RECORD ENABLE
EVENT RECORD ENABLE
TIMER RECORD ENABLE
EVENT RECORD IPS
TIMER RECORD IPS
PRE-ALARM RECORD
OVERWRITE
EVENT RECORD ALL CHANNEL
KEEP DATA LIMIT (DAYS)
RECORD CONFIGURATION
DEVICES
DCCS
IVS
CAMERA (For AVC799B & 797B Only)
IVS MODE
DISPLAY LINE
SENSITIVITY
RESET COUNT
VIRTUAL FENCE AREA
SCENE CHANGE
SCENE CHANGE SENSITIVITY
NOTIFY
SCHEDULE SETTING
GUARD
RECORD
DETECTION
ALARM
9
4. FRONT AND REAR PANELS
4.1 Front Panel
1)
LED Indicators
DVR is powered on.
HDD is reading or recording.
An alarm is triggered.
Timer recording is on.
Under playback status.
2)
CH1 ~ 16 / 1 ~ 8 / 1 ~ 4
Press the channel number buttons to select the channel to display.
3)
Press to show the 4 channel display mode.
4)
SEQ
Press to display each channel in full screen one by one starting from CH1. When the last channel is displayed, it
will repeat from CH1 again. To exit this mode, press “SEQ” again.
5)
SLOW
In the playback mode, press to show slow playback.
6)
ZOOM
Press to enlarge the picture of selected channel in the FRAME or FIELD recording mode.
7)
PLAY
Press to playback the latest recorded data.
8)
LIST (Event List Search)
Press to quickly search the recorded files by event lists: RECORD / MOTION / ALARM / TIME / HUMAN
DETECTION / IVS / STATISTIC, or select FULL to show all the event logs.
To quickly search the time you want, select “QUICK SEARCH”. For details, please refer to “5.4.1 QUICK
SEARCH” in the user manual.
9)
MENU
Press “MENU” to enter the main menu.
10) ENTER
Press “ENTER” to confirm the setting.
11) (▲) / (▼) / (◄) / (►)
Press ▲ / ▼ / ◄ / ► to move up / down / left / right.
In the playback mode:
Press “” to pause playback.
Press “” to stop playback.
Press ““ to fast forward.
Press ““ to fast rewind.
12) AUDIO (SLOW + ZOOM)
Press “SLOW” + “ZOOM” to select live or playback audio from audio channel 1~4.
Live audio from audio channel 1~4
(indicated in white).
Playback audio from audio channel 1~4
(indicated in yellow).
Audio channel unselected
13) P.T.Z. (
Press “
+ SEQ)
” + “SEQ” at the same time to enter / exit the PTZ control mode.
10
14) USB port
There are two USB ports on the front panel, one for connecting your USB mouse for mouse control, and the other
one for connecting your USB flash drive for video backup.
Note: It’s not allowed to have two USB mice or two USB flash drives connected on the front panel.
Note: For the compatible USB flash drive list, please refer to “APPENDIX 3” in the user manual.
4.2 Rear Panel
1)
75Ω / HI-IMPEDANCE (For AVC799B & 797B Only)
When using Loop function, please switch to HI-IMPEDANCE. When you don’t use Loop function, please switch to
75Ω.
2)
VIDEO IN (1 ~ 16 / 1 ~ 8 / 1 ~ 4): Connect to the video connector of a camera.
VIDEO LOOP (1 ~ 16 / 1 ~ 8): Video output connector.
Note: The DVR will automatically detect the video system of the camera, please make sure that the
cameras are properly connected to the DVR and power-supplied before the DVR is turned on.
3)
AUDIO IN (1~4)
Connect to the audio connector of a camera if the camera supports audio recording.
Note: To make a video backup with audio, make sure the camera which supports the audio function is
connected to the video-in channel and audio-in channel. For example, the audio data from audio
CH1 will be recorded with the video data from video CH1.
4)
AUDIO OUT
Connect to a speaker with 1 mono audio output.
Note: To know how many audio outputs your DVR supports, please refer to its specifications.
5)
MONITOR
Connect to a CRT monitor for video output.
Note: While connecting to a CRT monitor, it’s also supported to connect to a LCD monitor simultaneously
for dual video output.
6)
CALL
Connect to a monitor specific for sequence display.
7)
VGA
Connect to a LCD monitor directly.
Note: While connecting to a LCD monitor, it’s also supported to connect to a CRT monitor simultaneously
for dual video output.
8)
IR
Connect the IR receiver extension line for remote control.
9)
EXTERNAL I/O
This port is used to connect external devices (such as speed dome cameras or external alarm, etc).
10) LAN
Connect to Internet by LAN cable.
11) DC 19V
Connect to the supplied adapter.
12)
Power Switch
Switch to “\” to turn on the power, and “|” to turn off the power.
11
5. BASIC OPERATION
5.1 Live Page
Icon
Function
Icon
Function
Icon
Function
Live audio channel (1~4)
Playback audio channel (1~4)
Audio channel off
Digital zoom on
Digital zoom off
Timer recording
Network disconnected
Internet connected
LAN connected
USB mouse connected
USB flash drive / device connected
No USB device connected
Key lock
PTZ mode on
HDD overwrite
Administrator
Operator
Sequence
Recording
Alarm event
Motion event
Virtual fence event
One way pass event
Scene Change event
Human detection event
Flow counting enabled
Smart zoom
Record mode: Frame
Record mode: Field
Record mode: CIF
5.2 Record Icon
1)
Manual Recording
By defaults, manual recording is on (
2)
) when the DVR is powered on and a HDD is installed.
Event Recording
The event icons,
/
/
/
/
/
, show on the screen when their respective events occur and the
related record function is on.
3)
Timer Recording
When timer recording is on, you will see “
4)
” on the screen.
HDD Overwritten
Be defaults, the HDD overwritten function is set to ON, and “
” will be shown on the screen.
5.3 Playback
Click “
” on the quick menu bar to display the playback control panel, and click
video clip, or click
to enter the search list.
12
to play the latest recorded
Note: There must be at least 8192 images of recorded data for playback to work properly. If not, the
device will stop playback. For example, if the IPS is set to 30, the recording time should be at least
273 seconds (8192 images / 30 IPS) for the playback to work properly.
Note: During playback, the image size of the recording (FRAME, FIELD or CIF) will be shown on the
screen.
Playback Control
/
/
Fast Forward
Increase the speed for fast forward. Click once to get 4X speed forward and click
twice to get 8X speed, etc., and the maximum speed is 32X.
Fast Rewind
Increase the speed for fast rewind. Click once to get 4X speed rewind and click
twice to get 8X speed, etc., and the maximum speed is 32X.
Play / Pause
Click to play the latest recorded video clip immediately, and click again to pause.
Stop
In the pause mode, click
once to get one frame forward, and click
one frame rewind.
Click to stop the video playback.
to get
Slow Playback
Click once to get 1/4X speed playback, and click twice to get 1/8X speed
playback.
Previous /
Next Hour
Click to jump to the next / previous time interval in an hour, for example, 11:00 ~
12:00 or 14:00 ~ 15:00, and start playing the earliest event video clip recorded
during this whole hour.
A to B
Playback
Click to set point A and point B in a video clip, and the system will play only the
specified range in that clip.
Backup
Click to open the backup menu for video backup.
Event Search
Click
to quickly search the recorded files by event lists: RECORD / MOTION / ALARM / TIME / HUMAN
DETECTION / IVS / STATISTIC, or select FULL to show all the event logs.
To quickly search the time you want, select “QUICK SEARCH”. For details, please refer to “5.4.1 QUICK
SEARCH” in the user manual.
Audio Playback
In the playback mode, click
from audio channel 1~4.
on the quick menu bar as many times as needed to select live or playback audio
Live audio from audio channel 1~4
(indicated in white).
Playback audio from audio channel 1~4
(indicated in yellow).
Audio channel unselected
Note: To make a video backup with audio, make sure the camera which supports the audio function is
connected to the video-in channel and audio-in channel. For example, the audio data from audio
CH1 will be recorded with the video data from video CH1.
5.4 User Level Switch
In the key lock mode ( ), move your USB mouse to display the password input keypad. There are two user
levels for accessing the DVR: Administrator ( ) & Operator ( ).
When the administrator password is entered,
will be shown on the status bar of the screen and all operations
are allowed. The default administrator password is 0000.
13
When the operator password is entered,
will be shown on the status bar of the screen, and the main menu is
NOT allowed to access. The operator user level needs to be set in the main menu “SYSTEM”
“TOOLS”.
To switch between these two user levels, click the current user level icon to switch to the key lock mode, and
move your mouse to show the password input keypad, and enter the password of the user level you want.
5.5 VGA Output Resolution Support
Users are allowed to change the resolution depending on their display monitor.
Right-click to display the main menu, and select “ADVANCED CONFIG”
“DISPLAY”.
ADVANCED CONFIG
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
DEVICES
DCCS
IVS
NOTIFY
DE-INTERLACE (For AVC799B & 797B Only)
FULL SCREEN DURATION
QUAD SCREEN DURATION (For AVC799B & 797B Only)
DWELL SCREEN DURATION
DISPLAY COVERT
HDD DISPLAY MODE
ALPHA BLENDING
VGA OUTPUT
OFF
03
03
03
ON
HDD SIZE
200
1600 x 1200
EXIT
Move to “VGA OUTPUT”, and select the VGA resolution you want. There are three options as follows:
1024 x 768 (default)
1280 x 1024
1600 x 1200
Note: To have the best image quality on your LCD monitor, make sure (1) the selected DVR VGA output
resolution is supported by your monitor, and (2) the VGA output settings on both the LCD monitor
and DVR are consistent.
If the image is not positioned or scaled properly, please go to your monitor’s menu for adjustment.
For details, please refer to the user manual of your LCD monitor.
14
APPENDIX 1. SET IPHONE PUSH NOTIFICATION
This IVS DVR series supports instant event notifications to your iPhone with our self-developed program,
“EagleEyes”, installed. When a man is detected by a human detection camera, the DVR will immediately receive
alarm signals and send to your iPhone.
Note: iPhone is the registered trademark of Apple Inc.
Note: EagleEyes is a powerful mobile surveillance program developed by AV TECH Corporation. For more
operations details about EagleEyes, please visit http://www.eagleeyescctv.com.
For any comment or question about this program, please send to support@avtech.com.tw. Your
feedback is always welcomed.
You need to finish some settings in your iPhone for this function to work properly. For details, please refer to
“A1.2.2 Program Setup” at page 16.
A1.1 Prerequisite
Before setting this function, make sure you have checked the following:
You have an iPhone with our self-developed program, “EagleEyes”, installed. For details, please refer to “A1.2.1
Program Download” at page 15.
A human detection camera, AVM602V, is connected to the channel which supports DCCS of your IVS DVR.
Note: For AVC799B, only channel 1 ~ 4 support DCCS camera connection;
For AVC797B, only channel 1 & 2 support DCCS camera connection;
For AVC794B, only channel 1 supports DCCS camera connection.
The event record function of your IVS DVR is not disabled.
The motion detection function of your IVS DVR is not disabled.
Your IVS DVR is connected to Internet. For details, please refer to
http://www.surveillance-download.com/user/CMS.pdf.
A1.2 Set iPhone
A1.2.1 Program Download
STEP1: Go to “App Store” via your iPhone.
STEP2: Search the program with the keyword “eagleeyes”.
Note: You might be charged for Internet access via wireless or 3G networks. For the Internet access rate
details, please check with your local network operator or service provider.
15
STEP3: Read the introduction of the program if needed, and select “INSTALLED” to start the installation.
Follow the on-screen instructions to download and install the program. “
” will be shown on the iPhone
desktop for quick access when the program is installed successfully.
A1.2.2 Program Setup
Step1: Select “EagleEyes” to enter “Addressbook”, and select “+” at the bottom left corner to enter the device IP
address setting page.
Step2: Give a meaningful title to this IP setting, and enter the IP information needed to access this IVS DVR.
Step3: Make sure all the information is correct, and select “Save” on the top right corner to save your setting and
return to the address book page.
Column
Description
Required Column:
Title
Give a meaningful title to this IP setting.
IP Address / Port
Enter the IP address and port number used to access this DVR remotely.
Username / Password
Enter the user name and password used to access this DVR remotely. The default user name and
password are both “admin”.
Get Type
Click this button to detect the device type based on the IP data entered in the previous columns,
allowing users to check whether the device they want to connect is the right device, and allowing the
system to enable the functions and settings the device supports.
16
Column
Description
Optional Column:
Audio
Click “>” to select the audio channel you want, and slide to enable or disable the audio function.
Note: Before using this function, check whether the camera connected to this DVR supports
audio transmission and the connection is correct. For details, please refer to the DVR
user manual.
Format
Select the network transmission format.
Quality
Click “>” to select the image quality from Best, High, Normal or Basic.
Step4: To check whether your configurations are correct, select to immediately access
the DVR you just added. You should be able to see the live view of the DVR.
A1.2.3 Push Notification On
Step1: In the iPhone main menu, select “Settings” “Notifications”.
-- Make sure “Notifications” is set to “ON”.
-- Select “EagleEyes”, and make sure its settings are set to “ON”.
Step2: Then, return to the iPhone main menu, and select “EagleEyes” to enter the address book.
Select the title you just added, and make sure the button is set to “ON” to enable the Push Notification
support of this IVS DVR.
Step3: Try to trigger the human detection alarm and see if you will be notified.
17
APPENDIX 2. SET FLOW COUNTING / VIRTUAL FENCE / ONE-WAY PASS
IVS, Intelligent Video Surveillance, is the advanced application for motion detection, but more precise and smarter.
It can be applied to different situations with one of the following three modes: FLOW COUNTING, VIRTUAL
FENCE, and ONE WAY PASS.
Note: Four camera channels are supported for this function. For 16CH and 8CH models, users are
allowed to select four camera channels randomly to use this function; for 4CH models, all the four
camera channels are supported.
Right click to show the main menu, and select “
” “ADVANCED CONFIG” “IVS”.
ADVANCED CONFIG
CANERA
DETECTION
ALERT
NETWORK
SNTP
DISPLAY
RECORD
DEVICES
DCCS
IVS
NOTIFY
IVS1 IVS2 IVS3 IVS4
CAMERA (For AVC799B & 797B only)
IVS MODE
DISPLAY LINE
SENSITIVITY
RESET COUNT
VIRTUAL FENCE AREA
SCENE CHANGE
SCENE CHANGE SENSITIVITY
CH3
FLOW COUNTING
OFF
07
SUBMIT
SETUP
OFF
MIDDLE
EXIT
1)
CAMERA (For AVC799B & 797B only)
Select the camera channel that you want to use the IVS function.
2)
IVS MODE
Select one of the following three modes depending on your environment:
3)
MODE
DESCRIPTION
FLOW COUNTING
A virtual detection line is set to detect the moving direction of pedestrians for flow counting.
VIRTUAL FENCE
A virtual detection line is set to detect intruders crossing the detection line, and an alarm will be
triggered.
ONE WAY
A virtual detection line is set to detect intruders from the specified direction, and an alarm will be
triggered.
DISPLAY LINE
Select to display the detection line for IVS on the screen or not.
4)
SENSITIVITY
Set the sensitivity for IVS from 00 ~ 15. The larger the value, the more sensitive the IVS will be.
5)
RESET COUNT
Click “SUBMIT” to reset the flow counting number to 0 when the IVS mode is set to “FLOW COUNTING” and
activated.
6)
VIRTUAL FENCE AREA
Click “SETUP” to draw the detection line for IVS, and set the detection direction from left to right, or right to
left. This area setting is the detection base for IVS MODE.
7)
SCENE CHANGE
Select “ON” to trigger a motion event when the camera is sensed to be moved and the camera scene is
changed. At the same time, the icon “
“
” will be also shown on the screen in addition to the motion icon
”.
18
8)
SCENE CHANGE SENSITIVITY
Set the detection sensitivity for “SCENE CHANGE” to “HIGH”, “MIDDLE” or “LOW”.
A2.1 IVS APPLICATION
A2.1.1 FLOW COUNTING
Step1: Go to “VIRTUAL FENCE AREA” to draw a detection line with your mouse, and decide the detection
direction by selecting “REVERSE”.
Step2: Finish the IVS setting and return to the live view. The IVS icon “
” will be shown on the status bar. Click it
to show the flow counting panel as follows.
When anyone walks across the detection line, the system will determine his movement is in or out, and add
one count to the corresponding channel on the flow counting panel.
IN
People coming from the opposite direction to the arrow mark.
OUT
People coming from the same direction as the arrow mark.
19
A2.1.2 VIRTUAL FENCE and ONE WAY
Step1: Go to “VIRTUAL FENCE AREA” to draw a detection line with your mouse, and decide the detection
direction by selecting “REVERSE”.
Step2: Finish the IVS setting and return to the live view.
When anyone walks across the detection line, the system will determine his movement is in or out, and:
VIRTUAL FENCE
An event happens for anyone walking across the detection line, and “
” will be
shown on the screen.
ONE WAY
An event happens for anyone walking from the opposite direction to the arrow mark,
and “
” will be shown on the screen.
20
A2.2 IVS STATISTICS
”“
Click “
” to enter the event search menu. Then, select “STATISTIC”
LIST
QUICK SEARCH
RECORD
MOTION
ALARM
TIME
HUMAN DETECTION
IVS
FULL
STATISTIC
CHANNEL
01
02
03
04
INFLOW
EVENT TYPE
OUTFLOW
VIRTUAL FENCE
ONE WAY PASS
HUMAN DETECTION
MOTION
ALARM
HARD DISK
ALL HDD
TIME
2010/MAY/17
STATISTIC
SUBMIT
EXIT
Set all the criteria you want to search, and click “SUBMIT” in “STATISTIC” to show the event statistics by DAY in
LIST (default) or CHART.
To check the statistics in the bar chart, click “CHART”.
To switch to the MONTH or YEAR view, click “DAY” at the bottom.
List View
IVS STATISTIC
LIST
CHART
S
HOUR
COUNT
00:00 – 00:59
0
01:00 – 01:59
0
02:00 – 02:59
0
03:00 – 03:59
0
04:00 – 04:59
0
05:00 – 05:59
10
06:00 – 06:59
0
07:00 – 07:59
0
08:00 – 08:59
5
09:00 – 09:59
0
T
2010/MAY/17
DAY
EXIT
Chart View
IVS STATISTIC
LIST
CHART
S
30
COUNT
24
18
12
6
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0
HOUR
T
2010/MAY/17
DAY
21
EXIT
Open as PDF
Similar pages