WI-125 Batch
Controller
The Weigh-Tronix WI-125 Batch Controller for batching
and filling applications.
The wall mounted NEMA 4 enclosure is available in either
painted carbon steel or stainless steel.
The unit is easily configured for
2 speed single ingredient filling, e.g., big bag filling
1 speed single ingredient filling, e.g., mixing/blending of 2 products.
WI-125 Batch Controller
Start/Stop interlock, prevents accidental restart once
sequence is completed.
Minimum weight configuration can be configured
to prevent start up, unless above a minimum weight
(when third cutoff is available).
Emergency Stop, large red mushroom switch provides
quick operator access in the event of a problem e.g.,
burst containers.
Jog facility: allows the operator to top-off fill manually
in the event of an underfill or desired increase.
Batching lamp illuminates during the filling operation,
informing the operator of the status.
RS-232 / RS-485 serial port for connection with
a printer or computer.
Auto-Tare on start up configured to allow net weight
filling. (Empty container is tared)
Date and time documentation for use with printer or
computer to form part of a quality control system.
Specifications
Power requirements:
115 Volts AC, 230 Volts AC, 50/60 Hz
Excitation: 10 VDC
Operating temperature:
14 to 104° F (-10 to 40° C)
10 to 90% relative humidity
Operational annunciators:
Batching lamp on enclosure with gross, net, center of zero,
print, lb and kg on indicator
Dimensions:
11" W x 13.5" H x 5. 4" D (Carbon Steel)
11" W x 13.5" H x 6.4" D (Stainless Steel)
Display: Eight-digit, 0.6-inch high LED
Weight: 29 lb (13 kg)
Display rate: Configurable to 1, 2 or 5 times per second
Agencies:
NTEP Certificate of Conformance #92-167A4
Display averaging: One to ten display periods.
A to D conversion rate: 60 times per second
Warranty: 2 year limited warranty applies
Internal resolution:
884,736 counts at 3 mV/V per sec.
294,912counts at 1 mV/V per sec.
Increments:
0.0001 to 20,000 programmable to any
division size between these limits.
Output relay contacts rated:
10 A resistive load at 120/240 VAC
10 A load at 30 VDC
7.5 A inductive load at 120V AC
7 A inductive load at 240 V AC
Loadcells:
Drives up to 4- 350 ohm Weigh Bars or loadcells
Controls:
Start, Stop, Jog on enclosure
Gross/Net, Tare, Zero, Print, Units, Menu
Keypad (0-9) on indicator
Weigh Bar® is a registered trademark of Weigh-Tronix Inc
8/00(web) 125bc_l.p65
Printed in USA
Weigh-Tronix
1000 Armstrong Dr.
Fairmont, MN 56031 USA
Telephone: 507-238-4461
Facsimile: 507-238-4195
e-mail: industrial@weigh-tronix.com
www.wtxweb.com
Weigh-Tronix Canada, ULC
217 Brunswick Blvd.
Pointe Claire, QC H9R 4R7 Canada
Telephone: 514-695-0380
Facsimile: 514-695-6820
Weighing Products & Systems
Open as PDF
Similar pages