PT-110xl
Computer Graphics Video over Twisted Pair Transmitter with EDID
The PT-110xl is an extended range UXGA
line transmitter that receives a UXGA signal
and transmits it over a CAT 5/6 cable to the
PT-120xl or TP-120 receiver.
FEATURES
Resolution - Up to WUXGA & 1080p.
HDTV Compatible.
Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices
are within 150ft (50m) of each other.
Extended Transmission Range - Up to 250m (820ft) when used with Kramer’s twisted pair xl receivers (such as
PT−120xl, TP−122xl or TP−126xl).
EDID Capture - Copies and stores the EDID from a display device.
Increased Noise Immunity - An increased level of protection against noise, spikes and interference in adverse
environments.
PT-110xl
TECHNICAL SPECIFICATIONS
INPUT:
1 VGA/UXGA on a 15−pin HD connector.
OUTPUT:
1 twisted pair on an RJ−45 connector.
RESOLUTION:
Up to WUXGA, 1080p.
RANGE:
Up to 250m (820ft).
S/N RATIO:
Paired with PT−120xl, better than 70dB (worst case).
COUPLING:
AC.
POWER CONSUMPTION:
12V DC, 285mA.
OPERATING TEMPERATURE: 0° to +40°C (32° to 104°F).
STORAGE TEMPERATURE: −40° to +70°C (−40° to 158°F).
HUMIDITY:
10% to 90%, RHL non−condensing.
DIMENSIONS:
6cm x 6.5cm x 2.5cm (2.36" x 2.56" x 1") W, D, H.
WEIGHT:
0.14kg (0.31lbs) approx.
INCLUDED ACCESSORIES:
Power supply.
OPTIONS:
RK−4PT 19" rack adapter.
Open as PDF
Similar pages