7861 Edco 8" CPM-8 Walk Behind Scarifier Edco CPM

7861 Edco 8" CPM-8 Walk Behind Scarifier
Edco CPM-8 Scarifier will Clean, Texture,Level, Groove, and Remove material from concrete
flooring.
8" Working width will scarify approximately 350-500 sq ft per hour at depth per pass of
1/8".
Includes Drum and six Shafts.
7877 Edco 10" TG-10 Diamond Grinding Discs
Diteq 8" Teq-Edge Floor Grinder
For use by tile & stone contractors, floor preparation, rental stores, public work,
municipalities, coating contractors, shot blasting specialists, concrete repair contractors &
waterproofing contractors.
Features:










Full floating head
Free 8" diamond grinding disc (10 segments)
Vacuum connection
Central water feed
Fold-down handles
Raise & lower
Motor: Single phase 2hp, 115V electric motor with thermal overload or 5.5 hp Honda
engine
Convenient location for on/off
Fully powder coated/zinc plated
50 ft., 10 gauge ext included with electric model.
Ideal for:







Removing paint, epoxy or urethane coatings.
Repairing worn, damaged or spalled concrete.
Leveling uneven or curling slabs.
Grinding hard surfaces, feather edging sidewalks, gutters and similar surfaces.
Grinding high and uneven joints.
Removing excess surface material.
Leveling patches of plastic overlays or grout


Fast grinding of rough, uneven slab surfaces and drainage control.
Electric model weight only 120lbs including cutting hea
Mixing Stirrer
Open as PDF
Similar pages