Configurable Network Paging Console Product Instructions

Configurable Network Paging
Console
Product Instructions
Model: X-NPMI
Safety Guidelines
Danger
This sign reminds users of “dangerous voltage” on the
product.
Caution
This sign reminds users of important instructions
attached to the product.
Safety
guideline
In order to prevent electric shock, this equipment plug
shall not be used as conductor to extend power supply
line.
Do not block the equipment’s ventilation opening or put
other equipment on it.
Safety
guideline
Protect this equipment against rainwater or moisture so
as to avoid fire or electric shock.
Safety Precautions
Please carefully read and observe the following precautions before
installing, operating or using this product.
Electricity Utilization Safety


Local electrical safety regulations must be observed for product
installation and operation.
The Company shall not be liable for fire or electric shock accidents
caused by incorrect installation and mistake.
2
Transportation Safety

The product shall be protected against impact, violent vibration or
liquid erosion during transportation, storage and installation.
Environmental Requirements






Do not install the product within the environment of extreme
temperature or dust and mechanical vibration.
This equipment shall be well ventilated and protected against dust,
moisture, direct sunshine and violent during the use. It shall be kept
away from radiating objects or heat sources and well ventilated. The
optimum working environment temperature is 5-28ºC and relative
humidity <90%. If the equipment is in operation for a long time and
ambient temperature is too high, it is recommended that effective
measures should be taken to reduce temperature.
Requirements on grid power supply voltage by the equipment. In case
of too high, too low voltage or that fluctuating greatly, it is
recommended that AC regulated power supply should be installed.
As the product is not waterproof, do not expose it to rainwater or liquid
environment so as to avoid damaging it.
Put the equipment on solid level plane or install it on a rack.
Do not put other articles on the equipment top.
Safe Use Precautions






The equipment shall be installed under the direction of professionals.
Please carefully check power supply lines for damage prior to use. The
lines must be connected to the equipment in strict accordance with
identifications.
Power supply plugs and sockets shall match each other. Otherwise,
suitable sockets must be provided. Human damage to the sockets
shall be prohibited.
Power supply for the equipment shall be provided with sufficient
capacity and independent and reliable grounding lines.
Please ensure the equipment power supply grounding lines
interconnected and connected with the ground. Otherwise, it will cause
it abnormal, even damaged.
There are HV lines within it. When turn on the power, do not open the
equipment cover without permission so as to prevent electric shock.
3




Prior to the first energization to start equipment, please check its
external wiring for correctness so as to avoid damage.
During the energization, please do not touch wiring terminals identified
with “lightning” at random so as to avoid electric shock.
Please do not change equipment connection circuits at random during
energization so as to avoid damage.
In case of failure to the equipment, please ask professional repair
personnel to repair it. Otherwise, the Company shall neither dispose of
any problems nor undertake relevant responsibilities.
Label and User’s Manual



Please pay attention to information on the product label such as type
and power supply.
Please carefully read the user’s manual and operate according to the
instructions. The user’s manual is for reference for operation of
products of different types. Specific operations of products of different
types are not listed herein. In case of any problem, please contact the
Company.
Please maintain this Manual for future reference.
4
Product Overview
The X-NPMI (Configurable Network Paging Console) connects to the X618 system and related devices to transmit audio and control information
through the Ethernet network. The NPM is used for paging, controlling
broadcasts, monitoring zones, and for using the bidirectional intercom
function.
Product Characteristics





LCD touch control screen for operational controls
Customizable interface buttons and corresponding functions
Removable gooseneck microphone
Built-in loudspeaker for performing broadcast monitoring and
bidirectional talkback functions.
Digitizes audio signals to ensure that the quality of broadcasted audio
is not affected by external interference.
Functions and Features







Paging Function
Monitoring Function
Bidirectional Intercom
Broadcast Controls
Emergency Broadcasting Function
Broadcasting State Display
Broadcasting Volume Control
5
Front Panel
No.
Indicator Light
1
Gooseneck microphone
socket
2
LCD touch screen
3
Buttons
Description
Manual emergency broadcasting mode
EMERGENC button. A protective cover over the
Y
button prevents hitting the button by
mistake.
4
SELECT ALL Select all zones
5
TALK
Microphone startup/shutdown button
FAU
Fault indicator light. When the NPM
detects a network connection fault, the
indicator light turns yellow.
6
Indicator
lights
6
No.
Indicator Light
7
8
Description
RUN
Operation indicator light. When the NPM
is being used, this indicator light turns
green.
EMC
Emergency indicator light. When the
NPM enters the manual emergency
broadcasting mode when the
emergency button or menu is pressed
or selected, this indicator light turns red.
Rear Panel
No.
Port
Description
1
RJ45 Port
Connects to the DCS through an Ethernet cable
2
Audio input port
Connects the external sound source equipment
3
Audio output
port
Connects audio output equipment (such as an
audio recording device)
4
Power supply
input port
DC 12V
7
Specifications
Parameters
Values
Power supply voltage
DC 12V
AUX input
0 dB
AUX input impedance
10 K
Frequency response
60 Hz – 16 KHz (local input signal)
Microphone input
-51 dB
Audio output
0 dB
Monitoring loudspeaker
2 W/8 
Monitoring sound pressure
level
Higher than 65 dB and lower than 115 dB
(1 m in front of where the audio is being
output)
Operating temperature
-10 C to +55 C
Storage temperature
-40 C to +70 C
Humidity
 95%, without condensation
Packing List
No.
Product Name
Qty.
1
X-NPMI main appliance
1
2
Microphone pole
1
3
Windscreen
1
4
Power supply adapter
1
5
Network Cable (1.5m)
1
6
Audio line
1
8
No.
Product Name
Qty.
7
Warranty card
1
8
Qualification certificate
1
9
Product instructions
1
www.honeywellav.com
Life Safety A/V (Guangzhou) Co., Ltd
Address: No. 257 Junye Road, Guangzhou GETDD East
510530, China
Tel: +86 (0)20 2839 9600
Fax: +86 (0)20 2820 8706
© 2012 Honeywell International Inc. All rights reserved.
9
Open as PDF
Similar pages