BPS 150W Sine Wave Power Inverter
DC IN JACK
INTRODUCTION
Safely and efficiently charge the C-100 CPAP Battery via the cigarette
lighter/power socket of a vehicle.

Power PAP devices that do not have DC capability (i.e. Fisher & Paykel,
3B and Apex Medical devices) or whose DC input ports run opposite
polarity from other manufacturers (i.e. ResMed S8 Series devices).
Power other small electronic devices that operate from 12V and
do not have a DC cable with a cigarette lighter plug.
CPAP BATTERY AC POWER SUPPLY
INSTRUCTIONS: POWERING OTHER DEVICES
Input: 12V DC
Output: 110 - 120V AC
USB Output: 5V DC, 1 A/2.1 A
Rated Power: 150W (200W max)
Size: 3.5” x 2.25“ x 1” (L x W x H) Cord Length: 31.5” Weight: 6.2 oz

Insert the DC input cord included with the C-100 CPAP Battery Kit into
the DC out jack of the CPAP Battery.
Dual Battery Configuration:
 
INSTRUCTIONS: CHARGING THE C-100 CPAP BATTERY

Insert the AC power supply into the DC in jack of the CPAP Battery.
Dual Battery Configuration:
Connect the AC power supply to the DC power pigtail cord that is
included with the CPAP Battery Kit and then insert the DC power
pigtail cord into the DC in jacks of both CPAP Batteries.

Insert the AC power supply into the inverter.

Insert the inverter into the cigarette lighter/power socket
of the vehicle.

When charging is complete disconnect the inverter from the vehicle
and the CPAP Battery.

Insert the inverter into the DC input cord.

Insert the AC power supply or
USB power cord of your
device into the inverter.
DC INPUT CORD
DC OUT JACK

 
Connect the DC input cord to the DC power pigtail cord that is
included with the CPAP Battery Kit and then insert the DC power
pigtail cord into the DC out jacks of both CPAP Batteries.

SPECIFICATIONS


INVERTER



The 150W modified sine wave power inverter can be used in conjunction
with the C-100 CPAP Battery to:
INVERTER
BATTERY POWER SOLUTIONS
Open as PDF
Similar pages