9160 G2 Spec Sheet - Zebra Technologies

PRODUCT SPEC SHEET
ZEBRA 9160 G2
WHERE IS THE 9160
G2 AT HOME?
Indoor environments
ZEBRA 9160 G2
THE FLEXIBLE WIRELESS GATEWAY FOR MOBILE
PRODUCTIVITY
You need to manage and track inventory in some of the most challenging outdoor environments — from seaports and
rail yards to airports and expansive outdoor manufacturing yards. Not only are these areas vast, but materials are
often present that can wreak havoc on a traditional Wi-Fi signal, from large metal shipping containers to water, wood,
ceramics, microwave dryers, other 2.4 GHz wireless networks and more. The 9160 G2 wireless gateway solves that
problem with Narrowband wireless connectivity. Narrowband provides a robust and secure wireless connection for
simple data applications that can cost-effectively cover every inch of your sprawling facility. Just one 9160 G2 base
station covers up to one mile — a distance that would typically require 10 Wi-Fi access points. And since our
advanced network and data protocols overcome Narrowband bandwidth constraints, your workers get sub-second
access to the information they need to accurately and efficiently move inventory in, through and out of your facility.
Get affordable wireless connectivity for your largest spaces with Narrowband, only from Zebra.
Easy, cost-effective wireless coverage in every inch of your facility
Narrowband is ideal for your largest, most expansive areas, minimizing infrastructure requirements and cost while
delivering a solid dependable connection in challenging RF environments. Regardless of the types of materials or
volume of traffic in the 2.4 GHz band that are present in your environment, they will not degrade the signal. And since
the mobile devices connected to your narrowband network operate in low power receive mode, the resulting
substantial energy savings ensures that your workers have plenty of power for a full-shift.
Flexible backhaul options
The 9160 G2 offers wired and wireless options to connect to your network. You can connect the 9160 G2 to your
network with a single Ethernet cable — with support for Power-over-Ethernet, there is no need to run power. The
optional Wi-Fi 802.11a/b/g radio provides a wireless connection to your network, addressing areas where running a
cable is too challenging or expensive. And the wide variety of indoor and outdoor 2.4 GHz and 5 GHz directional and
sector panel antennas ensure a robust wireless connection back to your enterprise network.
Easy remote management
Centralized and remote management of security, configuration profiles and software upgrades makes network
management easy.
A total solution
In addition to the 9160 G2, you’ll need devices that can run on the Narrowband network. That’s why our Omnii XT15
handheld and VH10 vehicle mount mobile computers offer Narrowband radio options. These rugged devices are
ready for the toughest environmental conditions. And whether workers are on foot or driving a forklift or other material
handling vehicle, there is a device option that is perfect for the job
COST-EFFECTIVE, ROBUST WIRELESS CONNECTIVITY FOR
YOUR MOST EXPANSIVE AREAS
For more information, please visit www.zebra.com/9160g2
Suitable for rugged
warehouse and
manufacturing applications
with any type of coverage
pattern
Outdoor environments
A variety of high gain
antenna and wired or
wireless (WDS) backhaul
options make the 9160 G2
a great choice for outdoor
port and yard applications
Speciality
environments:
refrigerated
Dual radio operation and
antenna splitting allows for
coverage of isolated
refrigerated sections from
a single access point
Environments that
require Multiple SSIDs
Allows you to easily divide
the WLAN into virtual
wireless LANs, with VLAN
support for different
applications and different
user types.
For more information, please visit www.zebra.com/9160g2
TECHNICAL SPECIFICATIONS
PHYSICAL CHARACTERISTICS
SECURITY
Dimensions
802.1x authentication MAC filtering WPA 1 (TKIP
14.3 in. L x 10.3 in. W x 2.9 in. D
363 mm L x 262 mm W x 74 mm D
Weight
6.5 lbs./2.9 kg
Network Interface
10/100 Base-T with auto-
encryption) WPA 2 (802.11i, AES encryption) Inhibit/
Ignore SSID Broadcast User-based access control via
embedded Radius authentication server (PEAP with 8
APIs or less)
negotiation, half and full duplex
Diagnostic/
Configuration
Terminal Interface
RS232 port for debug and
diagnostics supporting
configuration and firmware update
SNMP support (compatible with
MapRF) Telnet to Console HTTP
Web Browser Management
Interface
Power
100 – 240VAC, 50/60Hz, 1A
Power-over-Ethernet
(PoE)
802.3af compliant, 48VDC nominal
Visual Indicators
LED 1 - on solid when Ethernet link
present LED 2 - blinks for rx/tx
Ethernet traffic LED 3 - blinks for rx
/tx radio 1 traffic LED 4 - blinks for
rx/tx radio 2 traffic LED 5 - always
off (unused at this time) LED 6 - on
solid
ADVANCED FEATURES
Wireless Distribution System (WDS) Load balancing
Multiple SSIDs/BSSIDs,Virtual Wireless Networks (VWNs
) Support of 802.IQ protocol Mini-controller capabilities
for thin client devices featuring VTxx, 5250 and 3274
emulations
SERVICES AND SUPPORT
Service from the
Start Primary:
REGULATORY
USA
PERFORMANCE CHARACTERISTICS
CPU
Intel IXP420 processor at 266MHz
Memory
16MB Flash, 32MB SDRAM
Operating System
Linux
A unique service that covers
normal wear and tear as well as
accidental damage to internal and
external components. Includes a
collection option with pre-paid
ground freight on return shipments.
FCC part 15, subpart B, class B (
unintentional radiated emission)
UL601950, 2000 Bi-Nat (electrical
safety) (* Note: NRTL/C done by
CSA covers UL 1950 bi-national
standards)
Canada
ICES-003 / CSA C108.8-M1983 (
unintentional radiated emission);
CSA 950 CSA-C22.2 No. 950-M98
(electrical safety)(* Note: FCC part
15, subpart B covers ICES-003 /
CSA C108.8-M1983)
European (CE Mark)
73/23/EEC Low Voltage Directive:
TUV & CB EN 60950:1992+A1+A2
+A3+A4+A11 (electrical safety) 89/
336/EEC EMC Directive: EN
50081-2: 1998 Generic Emission
Standard – Industrial Environment
EN 55022 based on CISPR 22,
class B (Information Technology
Equipment) EN 50082-1: 1997
Generic Immunity Standard –
Industrial Environment EN 61000-4
-2 ESD EN 61000-4-3 Radiated RF
Immunity EN 61000-4-4 Electrical
Fast Transients EN 61000-4-5
Surge withstand
USER ENVIRONMENT
Operating Temp.
0°C to +55° C / 32°F to +151°F
Storage Temp.
0°C to +70° C / 32° F to +158° F
Humidity
10% to 90% non-condensing
Sealing
IP42
Vibration
EH0002 (shipping vibration only)
Integrated Sensors
Motion (accelerometer); digital
compass
Reliability
MTBF 25,000 Hours (MIL-HDBK217F)
WIRELESS DATA COMMUNICATIONS
Narrowband
UHF bands: 403 – 470
MHz Channel Spacing: 12.5 - 25
kHz ; RF power: 500 - 1,000mW;
Environmental
Transmission speed: 4.8/9.6 kbps
@ 12.5 kHz, 9.6/19.2 kpbs @ 25
kHz
Optional Wi-Fi Radio
IEEE 802.11a/b/g, 802.1X, WPA /
WPA2-Enterprise & Shared Key,
FAST-MSCHAPv2; PEAPv0MSCHAPv2; PEAPv1-GTC; TLS,
64/128 WEP, AESCCMP, TKIP
Environmental
RoHS Compliant
WARRANTY
Subject to the terms of Zebra's hardware warranty
statement, the 9160 G2 is warranted against defects in
workmanship and materials for a period of 1 (one) year
from the date of shipment. For complete warranty
statement, go to: www.zebra.com/warranty
ANTENNA OPTIONS
Choose from indoor and outdoor UHF, 2.4 and 5GHz
omni-directional, directional and sector panel high gain
antennae. Supports antennae for bridging (WDS)
applications Antennae diversity is supported for 802.11
radios
Part number: SS-9160G2. Printed in USA 04/15.©2015 ZIH Corp. ZEBRA, the Zebra head graphic and Zebra Technologies logo are trademarks of ZIH Corp,
registered in many jurisdictions worldwide. All rights reserved. All other trademarks are the property of their respective owners.
ZEBRA TECHNOLOGIES
Open as PDF
Similar pages