HPE 425 802.11n Dual Radio Access Point Series data sheet

Data sheet
HPE 425 802.11n Dual Radio
Access Point Series
Product overview
The HPE 425 802.11n Dual Radio Access Point Series, designed to work in sync with HPE controllers,
delivers high-performance networking solutions. The enhanced controller architecture scales to
IEEE 802.11n—without requiring a controller replacement. The controllers provide advanced
radio resource management (RRM), including client load balancing and interference mitigation.
And the wireless controllers support a fast-roaming capability—an important feature, especially
for VoIP communications.
The 425 Access Points work in a managed mode with HPE wireless LAN controllers. The access
points (APs) provide RF spectrum analysis with detection and classification of non-IEEE 802.11
interference; and they have the ability to automatically resist interference. Wireless security is
comprehensive with integrated wireless IDS (Intrusion Detection System) and support for internal
and external authentication, authorization, and accounting (AAA) servers; built-in stateful firewalls;
per-user VLAN mapping; and authentication.
A summary of the highlights of the 425 Access Points:
•Dual radio—two spatial stream access supporting 300 Mb/s per radio
•Support for embedded antennas as well as an optional external antenna
•Powered via the IEEE 802.3af power over Ethernet (PoE) or the local power supply
•Comprehensive WLAN security
•Limited Lifetime Warranty
Data sheet
Page 2
Features and benefits
Management
•Wi-Fi Clear Connect
Provides a system-wide approach to improving WLAN reliability by proactively determining
and adjusting to changing RF conditions; helps optimize WLAN performance by mitigating
interference from Wi-Fi and non-Wi-Fi sources—using spectrum analysis capabilities built into
the APs, identifying rogue activity, and making decisions at a system-wide level
•Advanced RRM
––Automatic radio power adjustments
Include real-time power adjustments, based on changing environmental conditions, and signal
coverage adjustment
––Automatic radio channel
Provides intelligent channel switching and real-time interference detection
––Intelligent client load balancing
Determines the number of clients across neighboring APs; and adjusts client allocation
to balance the load
––Airtime fairness
Provides equal RF transmission time for wireless clients
•Spectrum analysis
––Power/frequency spectrum analysis
Measures noise from IEEE 802.11 remote sources
––Signal detection/classification
Identifies source of RF interference; for example, Bluetooth®, cordless phones, and microwave ovens
––Channel quality evaluation
Helps detect severe channel degradation and improves the reporting of poor RF performance
•Integrated IDS
Detects and locates unknown and rogue devices (refer to the controller data sheet for details)
•AP management
Provides a secure Web browser (SSL and VPN), a command-line interface, an SNMP v2c,
an SNMP v3, MIB-II with traps, and a RADIUS Authentication Client MIB (RFC 2618); offers
an embedded HTML management tool with secure access (SSL and VPN); and implements
scheduled configuration and firmware upgrades from a central controller
•HPE Intelligent Management Center and Wireless Services Manager Software
Provide centralized discovery, logging, status, and configuration management
•Diagnostics
Records association, authentication, and DHCP events in the client event log; provides a packet
capture tool for Ethernet and IEEE 802.11 interfaces (PCAP format); and includes a data rate matrix
•Enhanced AP survivability
Continues to operate using the old IP address, while the AP searches for a new controller
Data sheet
Page 3
•Compatible with HPE WLAN Controllers, HPE Unified Switches and Modules
––Refer to the HPE Access Point—Controller Compatibility Matrix at
h20195.www2.hpe.com/V2/GetDocument.aspx?docname=4AA5-0345ENW&cc=us&lc=en
––Refer to the release notes for minimum version numbers required.
Quality of service (QoS)
•Rate limiting
Supports per-wireless-client ingress-enforced maximums and per-wireless-client per-queue
guaranteed minimums
•Centralized traffic
Maintains L2 and L3 QoS settings, when using centralized traffic or guest access
•IEEE 802.1p prioritization
Delivers data to devices, based on the priority and type of traffic
•Wireless
––L2/L3/L4 classification
Using IEEE 802.1p VLAN priority, SpectraLink SVP, and DiffServ
––Multiple SSIDs per radio
Assigns Wi-Fi MultiMedia (WMM), IEEE 802.11e EDCF, and service-aware priority
•Microsoft Lync Server 2010 and 2013 Qualified
Qualified in the Microsoft Lync Server Wi-Fi interoperability program to ensures that products
comply with Microsoft’s guidelines for voice and video quality of service (QoS) delivery
•SpectraLink voice priority (SVP) support
Prioritizes SpectraLink voice IP packets sent from a SpectraLink NetLink SVP server to SpectraLink
wireless voice handsets to help ensure excellent voice quality
Connectivity
•IEEE 802.3af PoE support
Simplifies deployment and dramatically reduces installation costs by helping eliminate the time
and cost involved in supplying local power at each AP location
•Local power option
Offers 48V DC power connector for use with an optional power supply, when PoE is not available
•Auto-MDIX
Adjusts automatically for straight-through or crossover cables on the Ethernet interface
•Console port
Aids problem resolution
Data sheet
Page 4
Mobility
•Bandsteering
Redirects 5 GHz-capable clients automatically to the less-congested 5 GHz spectrum
•HPE 425 Antenna
–Embedded antenna
Provides excellent coverage through the use of embedded high-gain antennas (4 dBi antenna
at 2.4 GHz and 5 dBi antenna at 5 GHz); and helps save on the added cost of external antennas
––Optional external antenna
Includes four indoor RP-SMA connectors to be used with optional external antennas
•Anywhere, anytime wireless coverage
––Dual-radio IEEE 802.11b/g/n and 802.11a/n AP
––Per-radio software-selectable configuration of frequency bands
––Self-healing, self-optimizing local mesh that extends network availability
––Wi-Fi alliance certifications for interoperability with all IEEE 802.11a/b/g/n client devices
––IEEE 802.3af PoE
•Medical standards
Meets the European EN60601-1-2 standard for healthcare
•Multiple SSIDs per radio
––Up to 16 SSIDs per radio, each with a unique MAC address and configurable SSID broadcasts
––Individual security and QoS profiles
––Configurable DTIM and minimum data rate
––Each mapped to a separate IEEE 802.1Q VLAN
––WMM and/or WMM-PS
––Security filter
•AP client-access control
––Offers IEEE 802.1X authentication, using EAP-SIM, EAP-FAST, EAP-TLS, EAP-TTLS, and PEAP
––Delivers MAC address authentication, using local or RADIUS access lists
––Provides RADIUS AAA, using EAP-MD5, PAP, CHAP, and MS-CHAPv2
––Supports RADIUS Client (RFC 2865 and 2866) with location-aware support
––Enables L2 wireless client isolation
Data sheet
Page 5
Security
•Integrated IDS support
––Automated AP and client classification
Reduces manual effort; however, the administrator can override AP classification
––Comprehensive detection capabilities
Detects a wide range of attacks
––Flexible event reporting
Enables configuration to classify which events will result in notifications
––Location tracking capabilities
Helps identify the rogue-device location
––Flexible deployment models
Supports time slicing or dedicating a radio for full-time detection of attacks (refer to the controller
data sheet for details)
•IEEE 802.1X support
Provides port-based user authentication with support for the extensible authentication
protocol (EAP) MD5, TLS, TTLS, and PEAP—with choice of advanced encryption standard (AES),
temporal key integrity protocol (TKIP), and static or dynamic WEP encryption for protecting
wireless traffic between authenticated clients and the AP
•Choice of IEEE 802.11i, WPA2, or WPA
Locks out unauthorized wireless access by authenticating users prior to granting network access;
and secures the data integrity of wireless traffic using robust AES or TKIP encryption
•TKIP/WEP encryption
Is supported only on legacy IEEE 802.11a/b/g clients, as it has been deprecated from the IEEE 802.11n
standard
•Local wireless bridge client traffic filtering
Mitigates communication between wireless devices associated with the same AP
Additional information
•RFC support
Refer to the controller datasheet for specific RFCs and other industry standards supported
Warranty and support
•Limited Lifetime Warranty
See hpe.com/networking/warrantysummary for warranty and support information included
with your product purchase.
•Software releases
To find software for your product, visit hpe.com/networking/support; for details on the
software releases available with your product purchase, visit
hpe.com/networking/warrantysummary
Data sheet
Page 6
HPE 425 802.11n Dual Radio Access Point Series
Specifications
HPE 425 Wireless Dual Radio 802.11n (AM) Access Point (JG653A)
HPE 425 Wireless Dual Radio 802.11n (WW) Access Point (JG654A)
HPE 425 Wireless Dual Radio 802.11n (JP) Access Point (JG655A)
HPE 425 Wireless Dual Radio 802.11n (IL) Access Point (JG656A)
HPE 425 Wireless Dual Radio 802.11n (AM) 8 unit Eco-pack Access Points (JG687A)
HPE 425 Wireless Dual Radio 802.11n (WW) 8 unit Eco-pack Access Points (JG688A)
Ports
1 RJ-45 autosensing 10/100/1000 port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab
Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
AP characteristics
Radios
Radio operation modes
AP operation modes
Wi-Fi Alliance Certification
1 RJ-45 serial console port
Dual (a/n + b/g/n)
Client access, Local mesh, Packet capture
Controlled
a/b/g/n Wi-Fi Certified
Physical characteristics
Dimensions
Weight
Enclosure
7.43(w) x 7.43(d) x 2(h) in (18.86 x 18.86 x 5.08 cm)
1.65 lb (.75 kg) mounting bracket
Indoor, plenum rated
Memory and processor
Single core @ 560 MHz, 128 MB flash, 128 MB SDRAM
Mounting
Includes ceiling/wall mount kei as well as two ceiling mounting clips
Environment
Operating temperature
Operating relative humidity
Nonoperating/Storage temperature
Nonoperating/Storage relative humidity
32°F to 113°F (0°C to 45°C)
5% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
Data sheet
Specifications
Electrical characteristics
Description
Maximum power rating
Antenna
Number of internal antennas
Number of external antennas
Page 7
HPE 425 Wireless Dual Radio 802.11n (AM) Access Point (JG653A)
HPE 425 Wireless Dual Radio 802.11n (WW) Access Point (JG654A)
HPE 425 Wireless Dual Radio 802.11n (JP) Access Point (JG655A)
HPE 425 Wireless Dual Radio 802.11n (IL) Access Point (JG656A)
HPE 425 Wireless Dual Radio 802.11n (AM) 8 unit Eco-pack Access Points (JG687A)
HPE 425 Wireless Dual Radio 802.11n (WW) 8 unit Eco-pack Access Points (JG688A)
IEEE 802.3af PoE compliant for Gigabit Ethernet
12.9 W
(2) 4 dBi 2.4 GHz and (2) 5 dBi 5 GHz omnidirectional antennas
4
4
Notes
Optional 48V DC power supply
Frequency band and operating channels
Americas
2.412 - 2.462 GHz (1 - 11 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5650 MHz) channels)
5.745 - 5.825 GHz (149 - 165 channels)
European Union
2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5650 MHz) channels)
Rest of World (Actual channels designated
by selecting country in UI)
2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 channels)
5.745 - 5.825 GHz (149 - 165 channels)
Taiwan
2.412 - 2.462 GHz (1 - 11 channels)
5.280 - 5.320 GHz (56 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5650 MHz) channels)
5.745 - 5.825 GHz (149 - 165 channels)
Japan
2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 channels)
Israel
2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
Radio
FCC Part 15.247; FCC Part 15.407 (US); RSS-210 (Canada); EN 300 328; ARIB STD-T66; IDA Registration (Singapore);
RCR STD-33; ARIB STD-T71 (Japan); EN 301 893 (EU); KCC approval (Korea)
Safety
UL 2043; UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1
Medical
EN60601-1-2
RF Exposure
FCC Bulletin OET-65C; RSS-102; CFR 47, Part 2, Subpart J; ANSI/IEEE C95.1 (99); Ministry of Health Safety Code 6;
Australian Radiation Protection Std.
Features
Dual radio: IEEE 802.11a/n for high-throughput applications and IEEE 802.11b/g/n for legacy support applications
•Integrated antennas for both IEEE radios, supporting two spatial streams and 2x2 MIMO
•Four embedded antennas
•Both radios operate at full power and full performance on IEEE 802.3af PoE/Gigabit Ethernet
•External antenna, optional
Data sheet
Page 8
Specifications
HPE 425 Wireless Dual Radio 802.11n (AM) Access Point (JG653A)
HPE 425 Wireless Dual Radio 802.11n (WW) Access Point (JG654A)
HPE 425 Wireless Dual Radio 802.11n (JP) Access Point (JG655A)
HPE 425 Wireless Dual Radio 802.11n (IL) Access Point (JG656A)
HPE 425 Wireless Dual Radio 802.11n (AM) 8 unit Eco-pack Access Points (JG687A)
HPE 425 Wireless Dual Radio 802.11n (WW) 8 unit Eco-pack Access Points (JG688A)
Emissions
EN 55022 Class B; EN 301 489-1; EN 301 489-17; ICES-003 Class B; FCC Part 15, Class B
Notes
The HPE 425 Access Point power information listed excludes the embedded antenna. Review the Hewlett Packard Enterprise
documentation for your AP to understand the maximum output setting for your AP based on your country’s regulations
Two spatial stream AP, supporting 300 Mb/s per radio.
Maximum transmit power varies by country.
Regulatory model number: BJNGA-FB0002
Services
Refer to the Hewlett Packard Enterprise website at hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services, and response times in your area, please contact your
local Hewlett Packard Enterprise sales office.
Radio characteristics
Notes
These radio characteristics apply to the HPE 425 Access Points, including the embedded antenna. Power is limited based on country of operation.
IEEE 802.11n 5 GHz @ 40 MHz channel
Data rate
Receiver sensitivity
Transmit power
MCS0, MCS8 30 Mbps
-92 dBm
25 dBm
MCS7, MCS15 300 Mbps
-70 dBm
20 dBm
IEEE 802.11n 5 GHz @ 20 MHz channel
Data rate
Receiver sensitivity
Transmit power
MCS0, MCS8 14.4 Mbps
-95 dBm
25 dBm
MCS7, MCS15 144.4 Mbps
-73 dBm
20 dBm
IEEE 802.11n 2.4 GHz @ 40 MHz channel
Data rate
Receiver sensitivity
Transmit power
MCS0, MCS8 30 Mbps
-93 dBm
24 dBm
MCS7, MCS15 300 Mbps
-73 dBm
22 dBm
IEEE 802.11n 2.4 GHz @ 20 MHz channel
Data rate
Receiver sensitivity
Transmit power
MCS0, MCS8 14.4 Mbps
-96 dBm
24 dBm
MCS7, MCS15 144.4 Mbps
-76 dBm
22 dBm
IEEE 802.11a 5 GHz
Data rate
Receiver sensitivity
Transmit power
6 Mbps
-95 dBm
25 dBm
54 Mbps
-76 dBm
22 dBm
IEEE 802.11b/g 2.4 GHz
Data rate
Receiver sensitivity
Transmit power
1 Mbps
-99 dBm
25 dBm
11 Mbps
-93 dBm
25 dBm
6 Mbps
-96 dBm
25 dBm
54 Mbps
-79 dBm
23 dBm
Data sheet
Page 9
Specifications
HPE 425 Wireless Dual Radio 802.11n (AM) Access Point (JG653A)
HPE 425 Wireless Dual Radio 802.11n (WW) Access Point (JG654A)
HPE 425 Wireless Dual Radio 802.11n (JP) Access Point (JG655A)
HPE 425 Wireless Dual Radio 802.11n (IL) Access Point (JG656A)
HPE 425 Wireless Dual Radio 802.11n (AM) 8 unit Eco-pack Access Points (JG687A)
HPE 425 Wireless Dual Radio 802.11n (WW) 8 unit Eco-pack Access Points (JG688A)
MCS Index
800 nS Guard Interval
400 nS Guard Interval
20 MHz Rate (Mbps)
40 MHz Rate (Mbps)
20 MHz Rate (Mbps)
40 MHz Rate (Mbps)
0
6.5
13.5
7.2
15
1
13
27
14.4
30
2
19.5
40.5
21.7
45
3
26
54
28.9
60
4
39
81
43.3
90
5
52
108
57.8
120
6
58.5
121.5
65
135
7
65
135
72.2
150
8
13
27
14.4
30
9
26
54
28.9
60
10
39
81
43.3
90
11
52
108
57.8
120
12
78
162
86.7
180
13
104
216
115.6
240
14
117
243
130
270
15
130
270
144.4
300
Data sheet
Page 10
Standards and Protocols
(applies to all products in series)
Mobility
IEEE 802.11a High Speed Physical Layer in the 5 GHz Band
IEEE 802.11b Higher-Speed Physical Layer Extension in the 2.4 GHz Band
IEEE 802.11d Global Harmonization
IEEE 802.11g Further Higher Data Rate Extension in the 2.4 GHz Band
IEEE 802.11h Dynamic Frequency Selection
IEEE 802.11i Medium Access Control (MAC) Security Enhancements
HPE 425 802.11n Dual Radio Access Point Series accessories
Power supply
HPE 1-port Power Injector (J9407B)
HPE Gigabit IntelliJack 48V Power Supply (JD055B)
External antenna
HPE Indoor Omnidirectional Dual Band 2.5/6 dBi MIMO 4 Element Antenna (JG696A)
Learn more at
hpe.com/networking
Data sheet
Page 11
Data sheet
HPE access points and access devices are
Wi-Fi Certified, providing our customers with
the assurance that these products have met
and passed the rigorous interoperability
testing performed by the Wi-Fi Alliance
Organization. See the Specifications section
of this series for more information.
Sign up for updates
Rate this document
© Copyright 2013–2014, 2016 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change
without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.
Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license.
4AA4-8844ENN, February 2016, Rev. 3
Open as PDF
Similar pages