GA-N3150N-D2H
User's Manual
Rev. 1001
For more product details, please visit GIGABYTE's website.
To reduce the impacts on global warming, the packaging materials of this product
are recyclable and reusable. GIGABYTE works with you to protect the environment.
Motherboard
GA-N3150N-D2H
Motherboard
GA-N3150N-D2H
Nov. 5, 2015
Nov. 5, 2015
Copyright
© 2015 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Changes to the specifications and features in this manual may be made by GIGABYTE without
prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or
published in any form or by any means without GIGABYTE's prior written permission.
„„ In order to assist in the use of this product, carefully read the User's Manual.
„„ For product-related information, check on our website at: http://www.gigabyte.com
Identifying Your Motherboard Revision
The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0"
means the revision of the motherboard is 1.0. Check your motherboard revision before updating
motherboard BIOS, drivers, or when looking for technical information.
Example:
Table of Contents
GA-N3150N-D2H Motherboard Layout............................................................................4
Chapter 1 Hardware Installation......................................................................................5
1-1
1-2
1-3
1-4
1-5
1-6
Installation Precautions..................................................................................... 5
Product Specifications....................................................................................... 6
Installing the Memory........................................................................................ 8
Installing an Expansion Card............................................................................ 8
Back Panel Connectors..................................................................................... 8
Internal Connectors......................................................................................... 10
Chapter 2 BIOS Setup...................................................................................................17
2-1Main................................................................................................................ 18
2-2Advanced........................................................................................................ 19
2-3Security........................................................................................................... 23
2-4Boot................................................................................................................. 24
2-5 Save & Exit...................................................................................................... 26
Chapter 3 Appendix.......................................................................................................27
Drivers Installation...................................................................................................... 27
Regulatory Statements............................................................................................... 28
Contact Us................................................................................................................. 32
-3-
GA-N3150N-D2H Motherboard Layout
DDR3_1
ATX_12V
CPU_FAN
Intel® Braswell SoC N3150
GA-N3150N-D2H
DVI
VGA
M2_WIFI
GL850S
Realtek®
GbE LAN
AUDIO
SATA3 3 2
ASMedia®
ASM1061
CI
BAT
F_AUDIO
USB_LAN
CLR_CMOS
F_USB30
TPM
iTE®
Super I/O COMB
PCIEX1
SATA3 1 0
LPT
COMA
M_BIOS
F_PANEL
GL850S
F_USB
DDR3_2
HDMI
R_USB30
ATX
SPEAKER
KB_MS
SYS_FAN
CODEC
Box Contents
55 GA-N3150N-D2H motherboard
55 Motherboard driver disk
55 User's Manual
55 Two SATA cables
55 I/O Shield
The box contents above are for reference only and the actual items shall depend on the product package you obtain.
The box contents are subject to change without notice.
-4-
Chapter 1 Hardware Installation
1-1 Installation Precautions
The motherboard contains numerous delicate electronic circuits and components which can become
damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's
manual and follow these procedures:
•• Prior to installation, make sure the chassis is suitable for the motherboard.
•• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or
warranty sticker provided by your dealer. These stickers are required for warranty validation.
•• Always remove the AC power by unplugging the power cord from the power outlet before
installing or removing the motherboard or other hardware components.
•• When connecting hardware components to the internal connectors on the motherboard, make
sure they are connected tightly and securely.
•• When handling the motherboard, avoid touching any metal leads or connectors.
•• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic
components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,
keep your hands dry and first touch a metal object to eliminate static electricity.
•• Prior to installing the motherboard, please have it on top of an antistatic pad or within an
electrostatic shielding container.
•• Before connecting or unplugging the power supply cable from the motherboard, make sure
the power supply has been turned off.
•• Before turning on the power, make sure the power supply voltage has been set according to
the local voltage standard.
•• Before using the product, please verify that all cables and power connectors of your hardware
components are connected.
•• To prevent damage to the motherboard, do not allow screws to come in contact with the
motherboard circuit or its components.
•• Make sure there are no leftover screws or metal components placed on the motherboard or
within the computer casing.
•• Do not place the computer system on an uneven surface.
•• Do not place the computer system in a high-temperature or wet environment.
•• Turning on the computer power during the installation process can lead to damage to system
components as well as physical harm to the user.
•• If you are uncertain about any installation steps or have a problem related to the use of the
product, please consult a certified computer technician.
•• If you use an adapter, extension power cable, or power strip, ensure to consult with its installation
and/or grounding instructions.
-5-
1-2 Product Specifications
CPU
ŠŠ Built in with an Intel® Quad-Core Celeron® N3150 SoC (1.6 GHz)
Memory
ŠŠ 2 MB Cache
ŠŠ 2 x DDR3 DIMM sockets supporting up to 8 GB of system memory
*Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage
to these components.
*If only one memory is to be installed, be sure to install it in the DDR3_1 slot.
ŠŠ Dual channel memory architecture
ŠŠ Support for DDR3/DDR3L 1600/1333 MHz memory modules
Onboard
Graphics
Audio
LAN
*Due to an SoC limitation, if a 1333 MHz memory is installed, it will be downgraded
to 1066 MHz.
ŠŠ
ŠŠ
Support for non-ECC memory modules
Integrated in the SoC:
- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz
- 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz
-
ŠŠ
Š
Š
Š
Š
Support for up to 3 displays at the same time
Maximum shared memory of 512 MB
Realtek® ALC887 codec
High Definition Audio
2/4/5.1/7.1-channel
Š
Realtek® GbE LAN chip (10/100/1000 Mbit)
* The DVI-D port does not support D-Sub connection by adapter.
1 x HDMI port, supporting a maximum resolution of 3840x2160@30 Hz
* Support for HDMI 1.4 version.
* To configure 7.1-channel audio, you have to use an HD front panel audio module
and enable the multi-channel audio feature through the audio driver.
Expansion Slots Š
Š
1 x PCI Express x16 slot, running at x1
1 x M.2 Socket 1 connector for the wireless communication module (optional)
(M2_WIFI)
Storage Interface Š SoC:
- 2 x SATA 6Gb/s connectors (SATA 3 0/1)
Š ASMedia® ASM1061 chip:
- 2 x SATA 6Gb/s connectors (SATA 3 2/3)
USB
ŠŠ SoC:
-4 x USB 3.0/2.0 port (2 ports on the back panel, 2 ports available through
the internal USB header)
ŠŠ 2 x GL850S USB 2.0 Hubs:
-4 x USB 2.0/1.1 ports (2 ports on the back panel, 2 ports available through
the internal USB header)
Internal
Š 1 x 24-pin ATX main power connector
Š 1 x 4-pin ATX 12V power connector
Connectors
Š 1 x CPU fan header
Š 1 x system fan header
Š 4 x SATA 6Gb/s connectors
Š 1 x front panel header
Š 1 x front panel audio header
-6-
Internal
Connectors
Š
Š
ŠŠ
ŠŠ
Š
Š
ŠŠ
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
1 x USB 3.0/2.0 header
2 x USB 2.0/1.1 headers
2 x serial port headers
1 x parallel port header
1 x Trusted Platform Module (TPM) header
1 x speaker header
1 x chassis intrusion header
1 x Clear CMOS jumper
1 x PS/2 mouse port
1 x PS/2 Keyboard port
1 x D-Sub port
1 x DVI-D port
1 x HDMI port
2 x USB 3.0/2.0 ports
2 x USB 2.0/1.1 ports
1 x RJ-45 port
3 x audio jacks (Line In, Line Out, Mic In)
I/O Controller
Š
iTE® I/O Controller Chip
Hardware
Monitor
Š
Š
Š
Š
System voltage detection
CPU/System temperature detection
CPU/System fan speed detection
CPU/System fan speed control
Back Panel
Connectors
* Whether the fan speed control function is supported will depend on the cooler you
install.
BIOS
Š
Š
Š
Unique Features ŠŠ
ŠŠ
ŠŠ
1 x 64 Mbit flash
Use of licensed AMI UEFI BIOS
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Support for Xpress Install
Support for @BIOS
Support for APP Center
Bundled
Software
Operating
System
Š
Š
Support for Windows 10/8.1 64-bit
Support for Windows 7 32-bit/64-bit
Form Factor
ŠŠ Mini-ITX Form Factor; 17.0cm x 17.0cm
*Available applications in APP Center may vary by motherboard model. Supported
functions of each application may also vary depending on motherboard specifications.
ŠŠ Norton® Internet Security (OEM version)
* Please download the "Windows USB Installation Tool" from GIGABYTE's website
and install it before installing Windows 7.
* GIGABYTE reserves the right to make any changes to the product specifications and product-related information without
prior notice.
Please visit GIGABYTE's website
for support lists of CPU, memory
modules, and SSDs.
-7-
Please visit the Support\Utility List
page on GIGABYTE's website to
download the latest version of apps.
1-3 Installing the Memory
Read the following guidelines before you begin to install the memory:
•• Make sure that the motherboard supports the memory. It is recommended that memory of the same
capacity, brand, speed, and chips be used.
•• Always turn off the computer and unplug the power cord from the power outlet before installing the
memory to prevent hardware damage.
•• Memory modules have a foolproof design. A memory module can be installed in only one direction.
If you are unable to insert the memory, switch the direction.
Dual Channel Memory Configuration
This motherboard provides two memory sockets and supports Dual Channel Technology. After the memory
is installed, the BIOS will automatically detect the specifications and capacity of the memory. Enabling Dual
Channel memory mode will double the original memory bandwidth.
The two memory sockets are divided into two channels and each channel has one memory socket as following:
Channel
A: DDR3_1
Channel
B: DDR3_2
Due to SoC limitations, read the following guidelines before installing the memory in Dual Channel mode.
1. If only one memory is to be installed, be sure to install it in the DDR3_1 slot. Dual Channel mode
cannot be enabled if only one memory module is installed.
2. When enabling Dual Channel mode with two memory modules, it is recommended that memory of
the same capacity, brand, speed, and chips be used.
1-4 Installing an Expansion Card
Read the following guidelines before you begin to install an expansion card:
•• Make sure the motherboard supports the expansion card. Carefully read the manual that came
with your expansion card.
•• Always turn off the computer and unplug the power cord from the power outlet before installing an
expansion card to prevent hardware damage.
1-5 Back Panel Connectors
PS/2 Keyboard and PS/2 Mouse Port
Use the upper port (green) to connect a PS/2 mouse and the lower port (purple) to connect a PS/2 keyboard.
D-Sub Port
The D-Sub port supports a 15-pin D-Sub connector and supports a maximum resolution of 1920x1200@60 Hz
(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports D-Sub
connection to this port.
Please visit GIGABYTE's website for details on hardware installation.
-8-
DVI-D Port (Note)
The DVI-D port conforms to the DVI-D specification and supports a maximum resolution of 1920x1200@60 Hz
(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports DVI-D
connection to this port.
USB 3.0/2.0 Port
The USB 3.0 port supports the USB 3.0 specification and is compatible to the USB 2.0/1.1 specification.
Use this port for USB devices.
HDMI Port
The HDMI port is HDCP compliant and supports Dolby True HD and DTS HD
Master Audio formats. It also supports up to 192KHz/16bit 8-channel LPCM audio
output. You can use this port to connect your HDMI-supported monitor. The maximum supported resolution
is 3840x2160@30 Hz, but the actual resolutions supported are dependent on the monitor being used.
•• After installing the HDMI device, make sure to set the default sound playback device to HDMI.
(The item name may differ depending on your operating system.)
•• To set up a triple-display configuration, you must install motherboard drivers in the operating
system first.
RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following
describes the states of the LAN port LEDs.
Connection/
Speed LED
Activity LED
LAN Port
Activity LED:
Connection/Speed LED:
State
Orange
Green
Off
Description
1 Gbps data rate
100 Mbps data rate
10 Mbps data rate
State
Blinking
Off
Description
Data transmission or receiving is occurring
No data transmission or receiving is occurring
USB 2.0/1.1 Port
The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices.
Line In (Blue)
The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
Line Out (Green)
The line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be used to
connect front speakers in a 4/5.1/7.1-channel audio configuration.
Mic In (Pink)
The Mic in jack.
To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the
multi-channel audio feature through the audio driver. Please visit GIGABYTE's website for more
software information.
•• When removing the cable connected to a back panel connector, first remove the cable from your
device and then remove it from the motherboard.
•• When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent
an electrical short inside the cable connector.
(Note)
The DVI-D port does not support D-Sub connection by adapter.
-9-
1-6 Internal Connectors
1 4
3
2
8
7
6
16
17
10
15
9
11
13
14
12 5
1)
ATX_12V
10)
F_PANEL
2)
ATX
11)
F_AUDIO
3)
CPU_FAN
12)
TPM
4)
SYS_FAN
13)
COMA/COMB
5)
SATA3 0/1
14)
LPT
6)
SATA3 2/3
15)
SPEAKER
7)
F_USB
16)
CI
8)
F_USB30
17)
CLR_CMOS
9)
BAT
Read the following guidelines before connecting external devices:
•• First make sure your devices are compliant with the connectors you wish to connect.
•• Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
•• After installing the device and before turning on the computer, make sure the device cable has
been securely attached to the connector on the motherboard.
- 10 -
1/2)ATX_12V/ATX (2x2 12V Power Connector and 2x12 Main Power Connector)
With the use of the power connector, the power supply can supply enough stable power to all the components
on the motherboard. Before connecting the power connector, first make sure the power supply is turned
off and all devices are properly installed. The power connector possesses a foolproof design. Connect the
power supply cable to the power connector in the correct orientation.
The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected,
the computer will not start.
To meet expansion requirements, it is recommended that a power supply that can withstand high
power consumption be used (500W or greater). If a power supply is used that does not provide the
required power, the result can lead to an unstable or unbootable system.
2
ATX_12V:
1
Pin No.
1
2
3
4
4
3
ATX_12V
Definition
GND
GND
+12V
+12V
ATX:
12
24
1
13
ATX
Pin No. Definition
Pin No. Definition
1
3.3V
13
3.3V
2
3.3V
14
-12V
3
GND
15
GND
4
+5V
16
PS_ON (soft On/Off)
5
GND
17
GND
6
+5V
18
GND
7
GND
19
GND
8
Power Good
20
NC
9
5VSB (stand by +5V)
21
+5V
10
+12V
22
+5V
11
+12V (Only for 2x12-pin 23
+5V (Only for 2x12-pin ATX)
ATX)
12
3.3V (Only for 2x12-pin 24
GND (Only for 2x12-pin ATX)
ATX)
3/4)CPU_FAN/SYS_FAN (Fan Headers)
The motherboard has a 3-pin CPU fan header (CPU_FAN) and a 4-pin system fan header (SYS_FAN).
Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect it
in the correct orientation (the black connector wire is the ground wire). The speed control function requires
the use of a fan with fan speed control design. For optimum heat dissipation, it is recommended that a
system fan be installed inside the chassis.
SYS_FAN:
CPU_FAN:
1
CPU_FAN
Pin No.
1
2
3
Definition
GND
Speed Control
Sense
1
SYS_FAN
Pin No.
1
2
3
4
Definition
GND
Speed Control
Sense
VCC
•• Be sure to connect fan cables to the fan headers to prevent your CPU and system from
overheating. Overheating may result in damage to the CPU or the system may hang.
•• These fan headers are not configuration jumper blocks. Do not place a jumper cap on the headers.
- 11 -
5) SATA3 0/1 (SATA 6Gb/s Connectors, Controlled by Intel® SoC)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA
1.5Gb/s standard. Each SATA connector supports a single SATA device.
1
1
7
7
SATA3 1 0
Pin No.
1
2
3
4
5
6
7
Definition
GND
TXP
TXN
GND
RXN
RXP
GND
6) SATA3 2/3 (SATA 6Gb/s Connectors, Controlled by ASMedia® ASM1061)
DEBUG
PORT
DE
PO
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA
1.5Gb/s standard. Each SATA connector supports a single SATA device.
1
1
7
7
SATA3 3 2
Pin No.
1
2
3
4
5
6
7
- 12 -
Definition
GND
TXP
TXN
GND
RXN
RXP
GND
DEBUG
PORT
DEB
POR
S
S F
_
7) F_USB (USB 2.0/1.1 Header)
S
3
The header conforms to USB 2.0/1.1 specification. Each USB header can provide two USB ports via an
optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer.
B SS
9
10
Pin No.
1
2
3
4
5
1
2
Definition
Power (5V)
Power (5V)
USB DXUSB DYUSB DX+
Pin No.
6
7
8
9
10
Definition
USB DY+
GND
GND
No Pin
NC
S
B_
8) F_USB30 (USB 3.0/2.0 Header)
The header conforms to USB 3.0/2.0 specification and can provide two USB ports. For purchasing the
optional 3.5" front panel that provides two USB 3.0/2.0 ports, please contact the local dealer.
11
20
F_ U
F_USB30
10
1
Pin No.
1
2
3
4
5
6
7
8
9
10
Definition
VBUS
SSRX1SSRX1+
GND
SSTX1SSTX1+
GND
D1D1+
NC
Pin No.
11
12
13
14
15
16
17
18
19
20
Definition
D2+
D2GND
SSTX2+
SSTX2GND
SSRX2+
SSRX2VBUS
No Pin
•• Do not plug the IEEE 1394 bracket (2x5-pin) cable into the USB 2.0/1.1 header.
•• Prior to installing the USB bracket, be sure to turn off your computer and unplug the power cord
from the power outlet to prevent damage to the USB bracket.
- 13 -
S
9) BAT (Battery)
The battery provides power to keep the values (such as BIOS configurations, date, and time information)
in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low
level, or the CMOS values may not be accurate or may be lost.
You may clear the CMOS values by removing the battery cable:
1. Turn off your computer and unplug the power cord.
2. Unplug the the battery cable from the battery cable header and wait for one minute.
3. Plug in the battery cable.
4. Plug in the power cord and restart your computer.
•• Always turn off your computer and unplug the power cord before replacing the battery.
•• Replace the battery with an equivalent one. Danger of explosion if the battery is replaced with
an incorrect model.
•• Contact the place of purchase or local dealer if you are not able to replace the battery by yourself
or uncertain about the battery model.
•• When installing the battery, note the orientation of the positive side (+) and the negative side (-)
of the battery (the positive side should face up).
•• Used batteries must be handled in accordance with local environmental regulations.
10) F_PANEL (Front Panel Header)
Connect the power switch, reset switch, and system status indicator on the chassis to this header according
to the pin assignments below. Note the positive and negative pins before connecting the cables.
10 9
Power Switch
Power LED
PW-
PW+
PLEDPLED+
NC
RES+
RESHDHD+
Reset Switch
Hard Drive
Activity LED
2 1
•• PLED (Power LED, Yellow):
Connects to the power status indicator on the chassis front panel. The LED
System Status LED
is on when the system is operating. The LED is off when the system is in S3/
S0
On
S4 sleep state or powered off (S5).
S3/S4/S5
Off
•• PW (Power Switch, Red):
Connects to the power switch on the chassis front panel. You may configure the way to turn off your
system using the power switch (refer to Chapter 2, "BIOS Setup," "Power Management," for more
information).
•• HD (Hard Drive Activity LED, Blue):
Connects to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive
is reading or writing data.
•• RES (Reset Switch, Green):
Connects to the reset switch on the chassis front panel. Press the reset switch to restart the computer
if the computer freezes and fails to perform a normal restart.
•• NC (Purple):
No connection.
The front panel design may differ by chassis. A front panel module mainly consists of power switch, reset switch,
power LED, hard drive activity LED and etc. When connecting your chassis front panel module to this header, make
sure the wire assignments and the pin assignments are matched correctly.
- 14 -
11) F_AUDIO (Front Panel Audio Header)
The front panel audio header supports Intel® High Definition audio (HD) and AC'97 audio. You may connect
your chassis front panel audio module to this header. Make sure the wire assignments of the module
connector match the pin assignments of the motherboard header. Incorrect connection between the module
connector and the motherboard header will make the device unable to work or even damage it.
For HD Front Panel Audio:
Pin No. Definition
1
MIC2_L
2
GND
3
MIC2_R
4
-ACZ_DET
5
LINE2_R
6
Sense
7
FAUDIO_JD
8
No Pin
9
LINE2_L
10
Sense
1 2
9 10
For AC'97 Front Panel Audio:
Pin No. Definition
1
MIC
2
GND
3
MIC Power
4
NC
5
Line Out (R)
6
NC
7
NC
8
No Pin
9
Line Out (L)
G.QBOFM
10
NC
•• The front panel audio header supports HD audio by default.
•• Audio signals will be present on both of the front and back panel audio connections simultaneously.
•• Some chassis provide a front panel audio module that has separated connectors on each wire instead
of a single plug. For information about connecting the front panel audio module that has different
wire assignments, please contact the chassis manufacturer.
12) TPM (Trusted Platform Module Header)
You may connect a TPM (Trusted Platform Module) to this header.
19
1
20
2
DEBUG
PORT
Pin No.
Definition
Pin No.
Definition
1
2
3
4
5
6
7
8
9
10
LCLK
GND
LFRAME
No Pin
LRESET
NC
LAD3
LAD2
VCC3
LAD1
11
12
13
14
15
16
17
18
19
20
LAD0
GND
NC
NC
SB3V
SERIRQ
GND
NC
NC
SUSCLK
13) COMA/COMB (Serial Port Headers)
The COM header can provide one serial port via an optional COM port cable. For purchasing the optional
COM port cable, please contact the local dealer.
9
10
1
2
Pin No.
1
2
3
4
5
Definition
NDCDNSIN
NSOUT
NDTRGND
Pin No.
6
7
8
9
10
- 15 -
Definition
NDSRNRTSNCTSNRINo Pin
DEBUG
PORT
14) LPT (Parallel Port Header)
The LPT header can provide one parallel port via an optional LPT port cable. For purchasing the optional
LPT port cable, please contact the local dealer.
Pin No.
25
1
26
2
1
2
3
4
5
6
7
8
9
Definition
STBAFDPD0
ERRPD1
INITPD2
SLINPD3
Pin No.
10
11
12
13
14
15
16
17
18
Definition
GND
PD4
GND
PD5
GND
PD6
GND
PD7
GND
Pin No.
19
20
21
22
23
24
25
26
Definition
ACKGND
BUSY
GND
PE
No Pin
SLCT
GND
15) SPEAKER (Speaker Header)
Connects to the speaker on the chassis front panel. The system reports system startup status by issuing
a beep code. One single short beep will be heard if no problem is detected at system startup.
Pin No.
1
2
3
4
1
Definition
VCC
NC
NC
SPK-
16) CI (Chassis Intrusion Header)
This motherboard provides a chassis detection feature that detects if the chassis cover has been removed.
This function requires a chassis with chassis intrusion detection design.
Pin No.
1
2
1
Definition
Signal
GND
17) CLR_CMOS (Clear CMOS Jumper)
Use this jumper to clear the BIOS configuration and reset the CMOS values to factory defaults. To clear
the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.
Open: Normal
Short: Clear CMOS Values
•• Always turn off your computer and unplug the power cord from the power outlet before clearing
the CMOS values.
•• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or
manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS configurations).
- 16 -
Chapter 2 BIOS Setup
BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the
motherboard. Its major functions include conducting the Power-On Self-Test (POST) during system startup,
saving system parameters and loading operating system, etc. BIOS includes a BIOS Setup program that allows
the user to modify basic system configuration settings or to activate certain system features.
When the power is turned off, the battery on the motherboard supplies the necessary power to the CMOS to
keep the configuration values in the CMOS.
To access the BIOS Setup program, press the <Delete> key during the POST when the power is turned on.
To upgrade the BIOS, use either the GIGABYTE Q-Flash or @BIOS utility.
•• Q-Flash allows the user to quickly and easily upgrade or back up BIOS without entering the operating system.
•• @BIOS is a Windows-based utility that searches and downloads the latest version of BIOS from the Internet
and updates the BIOS.
•• Because BIOS flashing is potentially risky, if you do not encounter problems using the current version of BIOS,
it is recommended that you not flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS flashing
may result in system malfunction.
•• It is recommended that you not alter the default settings (unless you need to) to prevent system instability or other
unexpected results. Inadequately altering the settings may result in system's failure to boot. If this occurs, try to
clear the CMOS values and reset the board to default values. (Refer to the "Load Optimized Defaults" section in
this chapter or introductions of the battery/clear CMOS jumper in Chapter 1 for how to clear the CMOS values.)
- 17 -
2-1Main
Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use
arrow keys to move among the items and press <Enter> to accept or enter a sub-menu.
Main Menu Help
The on-screen description of a highlighted setup option is displayed on the bottom line of the Main Menu.
Submenu Help
While in a submenu, press <F1> to display a help screen (General Help) of function keys available for the menu.
Press <Esc> to exit the help screen. Help for each item is in the Item Help block on the right side of the submenu.
(Sample BIOS Version: E28)
•• When the system is not stable as usual, select the Restore Defaults item to set your system to
its defaults.
•• The BIOS Setup menus described in this chapter are for reference only and may differ by BIOS
version.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Main
Advanced
Security
Boot
Save & Exit
BIOS Information
BIOS ID8A08AG05
Project NameN3150ND2H
BIOS VersionE28
Build Date and Time
09/18/2015 11:05:12
Access LevelAdministrator
Memory Information
Total Memory
2048 MB (LPDDR3)
Memory Slot0
2048 MB (LPDDR3)
Memory Slot1Not Present
TXE Information
TXE FW Version02.00.00.2073
System Language[English]
System Date
[Mon 09/18/2015]
System Time[14:35:02]
gf: Select Screen
hi: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.17.1249. Copyright (C) 2015 American Megatrends, Inc.
This section provides information on your motherboard model, BIOS version, and memory information. You can
also select the default language used by the BIOS and manually set the system time.
•
System Language
•
System Date
•
•
Selects the default language used by the BIOS.
Sets the system date. The date format is week (read-only), month, date, and year. Use <Tab> to switch
between the Month, Date, and Year fields and use the <+> or <-> key to set the desired value.
System Time
Sets the system time. The time format is hour, minute, and second. For example, 1 p.m. is 13:00:00. Use
<Tab> to switch between the Hour, Minute, and Second fields and use the <+> or <-> key to set the desired
value.
Access Level
Displays the current access level depending on the type of password protection used. (If no password is
set, the default will display as Administrator.) The Administrator level allows you to make changes to all
BIOS settings; the User level only allows you to make changes to certain BIOS settings but not all.
- 18 -
2-2Advanced
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Main
Advanced
Security
Boot
Save & Exit
Onboard LAN Controller
[Enabled]
Power Loading[Auto]
MAX TOLUD
[2 GB]
Restore AC Power Loss [Power Off]
Soft-Off by PWR-BTTN
[Instant-off]
DDR Voltage Control
[Auto]
`` Realtek PCIe GBE Family Controller (MAC:40:8D:5C:16:9B:F6)
`` Hardware Monitor
`` SIO Misc Functions
`` CPU Configuration
`` Intel IGD Configuration
`` SATA Configuration
`` SIO Configuration
`` Network Stack Configuration
`` CSM Configuration
`` Offboard SATA Controller Configuration
`` USB Configuration
`` IntelRMT Configuration
gf: Select Screen
hi: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.17.1249. Copyright (C) 2015 American Megatrends, Inc.
&& OnBoard LAN Controller
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
&& Power Loading
Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing
it to shutdown or fail. If this occurs, please set to Enabled. Auto lets the BIOS automatically configure this
setting. (Default: Auto)
&& MAX TOLUD
Allows you to configure the maximum TOLUD value. 2 GB is the default.
Determines the state of the system after the return of power from an AC power loss.
Power
OffThe system stays off upon the return of the AC power. (Default)
Power
On
The system is turned on upon the return of the AC power.
Last
State
The system returns to its last known awake state upon the return of the AC power.
&& Restore AC Power Loss
&& Soft-Off by PWR-BTTN
Configures the way to turn off the computer in MS-DOS mode using the power button.
Instant-Off
Press the power button and then the system will be turned off instantly. (Default)
Delay
4 Sec.Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
&& DDR Voltage Control
Allows you to set the memory voltage. Options are: 1.35V, 1.50V, Auto. Auto lets the BIOS automatically
configure this setting. (Default: Auto)
`` Realtek PCIe GBE Family Controller
This sub-menu provides information on LAN configuration and related configuration options.
- 19 -
`` Hardware Monitor
&& CPU Temperature/System Temperature
Displays current CPU/system temperature.
Displays current CPU/system fan speeds.
Displays the current system voltages.
&& CPU/System Fan Speed
&& VCore/VCC3/+12V/VCC/CPU_VAXG/Vnn/DDR1_35V
`` SIO Misc Functions
&& ErP
Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled)
Note: When this item is set to Enabled, the following functions will become unavailable: Resume by Alarm,
PME event wake up, power on by mouse, power on by keyboard, and wake on LAN.
&& Case Open
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Open", otherwise it will show "Close."
To clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings
to the CMOS, and then restart your system.
&& Reset Case Open Status
Disabled
Keeps or clears the record of previous chassis intrusion status. (Default)
Enabled
Clears the record of previous chassis intrusion status and the Case Open field will
show "No" at next boot.
&& Case intrusion Prompt
Allows you to determine whether to display chassis intrusion notification at system startup. (Default: Disabled)
`` CPU Configuration
&& Limit CPUID Maximum
Allows you to determine whether to limit CPUID maximum value. Set this item to Disabled for Windows XP
operating system; set this item to Enabled for legacy operating system such as Windows NT4.0. (Default:
Disabled)
&& Intel Virtualization Technology
Enables or disables Intel® Virtualization Technology. Virtualization enhanced by Intel® Virtualization
Technology will allow a platform to run multiple operating systems and applications in independent partitions.
With virtualization, one computer system can function as multiple virtual systems. (Default: Enabled)
&& Power Technology
Allows you to configure Intel® power management features. (Default: Custom)
&& EIST
Enables or disables Enhanced Intel® Speed Step Technology (EIST). Depending on CPU loading, Intel®
EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease
average power consumption and heat production. Auto lets the BIOS automatically configure this setting.
(Default: Enabled)
&& Turbo Mode
Allows you to determine whether to enable the Intel® CPU Turbo Boost technology. Auto lets the BIOS
automatically configure this setting. (Default: Auto)
`` Intel IGD Configuration
This section provides onboard graphics-related configuration options.
- 20 -
&& Integrated Graphics Device
Enables or disables the onboard graphics function. (Default: Enabled)
`` SATA Configuration
&& SATA Controller
Enables or disables the integrated SATA controllers. (Default: Enabled)
Allows you to set the operation mode of the SATA ports to Gen 1, Gen 2, or Gen 3. (Default: Gen 3)
Enables or disables each SATA port. (Default: Enabled)
&& SATA Interface Speed
`` Serial ATA Port 0/1
&& Port 0/1
`` SIO Configuration
This section provides information on the super I/O chip and allows you to configure the serial port and
parallel port.
`` Network Stack Configuration
&& Network stack
Disables or enables booting from the network to install a GPT format OS, such as installing the OS from
the Windows Deployment Services server. (Default: Disabled)
&& Ipv4 PXE Support
Enables or disables IPv4 PXE Support. This item is configurable only when Network stack is enabled.
Enables or disables IPv6 PXE Support. This item is configurable only when Network stack is enabled.
Allows you to set the waiting time for cancelling the PXE boot by pressing the <ESC> key. This item is
configurable only when Network stack is enabled.
&& Ipv6 PXE Support
&& PXE boot wait time
&& Media detect count
Allows you to set the number of times to check the presence of media. This item is configurable only when
Network stack is enabled.
`` CSM Configuration
&& CSM Support
Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process.
Enabled
Enables UEFI CSM. (Default)
Disabled
Disables UEFI CSM and supports UEFI BIOS boot process only.
&& Network
Allows you to select whether to enable the UEFI or legacy option ROM for the LAN controller.
Do
not launch Disables option ROM.
UEFI
Enables UEFI option ROM only. (Default)
Legacy
Enables legacy option ROM only.
This item is configurable only when CSM Support is set to Enabled.
&& Storage
Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller.
Do
not launch Disables option ROM.
UEFI
Enables UEFI option ROM only. (Default)
Legacy
Enables legacy option ROM only.
This item is configurable only when CSM Support is set to Enabled.
- 21 -
&& Video
Allows you to select whether to enable the UEFI or legacy option ROM for the graphics controller.
Do
not launch Disables option ROM.
UEFI
Enables UEFI option ROM only.
Legacy
Enables legacy option ROM only. (Default)
This item is configurable only when CSM Support is set to Enabled.
&& Other PCI devices
Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other
than the LAN, storage device, and graphics controllers.
Do
not launch Disables option ROM.
UEFI
Enables UEFI option ROM only. (Default)
Legacy
Enables legacy option ROM only.
This item is configurable only when CSM Support is set to Enabled.
Displays information on your SATA SSD if installed.
`` OffBoard SATA Controller Configuration
`` USB Configuration
&& Legacy USB Support
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
&& XHCI Mode
Allows you to determine the operating mode for the xHCI controller in OS.
EnabledAll
shared ports are eventually routed to the xHCI controller during the BIOS boot process.
If BIOS does not have pre-boot support for the xHCI controller, it should initially route
the sharable ports to the EHCI controller and then prior to OS boot it should route the
ports to xHCI controller. Note: OS has to provide support for the xHCI controller in this
mode. If the OS does not provide support, all sharable ports won't work. (Default)
Disabled
The USB 3.0 ports are routed to the EHCI controller and the xHCI controller is turned
off. All USB 3.0 devices function as High Speed devices regardless of xHCI software
support/availability.
&& USB Mass Storage Driver Support
Enables or disables support for USB storage devices. (Default: Enabled)
Displays a list of connected USB mass storage devices. This item appears only when a USB storage device
is installed.
&& Mass Storage Devices
`` IntelRMT Configuration
&& Intel RMT Support
Enables or disables Intel® Ready Mode Technology. (Default: Disabled)
- 22 -
2-3Security
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main
Advanced
Security
Boot
Save & Exit
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length3
Maximum length20
gf: Select Screen
hi: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Administrator Password
User Password
`` Secure Boot menu
Version 2.17.1249. Copyright (C) 2015 American Megatrends, Inc.
&& Administrator Password
Allows you to configure an administrator password. Press <Enter> on this item, type the password, and
then press <Enter>. You will be requested to confirm the password. Type the password again and press
<Enter>. You must enter the administrator password (or user password) at system startup and when entering
BIOS Setup. Differing from the user password, the administrator password allows you to make changes to
all BIOS settings.
&& User Password
Allows you to configure a user password. Press <Enter> on this item, type the password, and then press
<Enter>. You will be requested to confirm the password. Type the password again and press <Enter>.
You must enter the administrator password (or user password) at system startup and when entering BIOS
Setup. However, the user password only allows you to make changes to certain BIOS settings but not all.
To cancel the password, press <Enter> on the password item and when requested for the password, enter
the correct one first. When prompted for a new password, press <Enter> without entering any password.
Press <Enter> again when prompted to confirm.
NOTE: Before setting the User Password, be sure to set the Administrator Password first.
&& HDD Security Configuration
Displays a list of connected hard drives and allows you to set a password for a specific hard drive. This
item appears only when a hard drive is installed.
`` Secure Boot menu
&& System Mode
Displays the current system mode.
Displays the current secure boot state.
Displays the vendor keys.
&& Secure Boot
&& Vendor Keys
- 23 -
&& Secure Boot
Enables or disables the secure boot function. Secure Boot requires all the applications that are running
during the booting process to be pre-signed with valid digital certificates. This way, the system knows all
the files being loaded before Windows 8 loads and gets to the login screen have not been tampered with.
(Default: Enabled)
&& Secure Boot Mode
Allows you to configure the secure boot mode. (Default: Standard)
`` Key Management
This section provides you with configuration options for secure boot key management.
2-4Boot
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Main
Advanced
Security
Boot
Save & Exit
Boot Configuration
Setup Prompt Timeout6
Bootup NumLock State[On]
Full Screen LOGO Show
[Enabled]
Boot Option Priorities
Fast Boot[Disabled]
New Boot Option Policy
[Default]
gf: Select Screen
hi: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.17.1249. Copyright (C) 2015 American Megatrends, Inc.
&& Setup Prompt Timeout
Allows you to configure the number of seconds to stay in BIOS setup prompt screen. (Default: 6)
Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default: On)
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the
GIGABYTE Logo when the system starts up. (Default: Enabled)
&& Bootup NumLock State
&& Full Screen LOGO Show
&& Fast Boot
Enables or disables Fast Boot to shorten the OS boot process. (Default: Disabled)
- 24 -
&& SATA Support
All
Sata DevicesAll SATA devices are functional in the operating system and during the POST.
(Default)
Last
Boot HDD OnlyExcept for the previous boot drive, all SATA devices are disabled before the OS
boot process completes.
This item is configurable only when Fast Boot is set to Enabled.
&& VGA Support
Allows you to select which type of operating system to boot.
Auto
Enables legacy option ROM only.
EFI
Driver
Enables EFI option ROM. (Default)
This item is configurable only when Fast Boot is set to Enabled.
Disabled
All USB devices are disabled before the OS boot process completes.
Full
Initial
All USB devices are functional in the operating system and during the POST.
Partial
InitialPart of the USB devices are disabled before the OS boot process completes.
(Default)
This item is configurable only when Fast Boot is set to Enabled.
Disabled
All PS/2 devices are disabled before the OS boot process completes.
Enabled
All PS/2 devices are functional in the operating system and during the POST.
(Default)
This item is configurable only when Fast Boot is set to Enabled.
Disabled
Disables booting from the network. (Default)
Enabled
Enables booting from the network.
This item is configurable only when Fast Boot is set to Enabled.
&& USB Support
&& PS2 Devices Support
&& NetWork Stack Driver Support
&& Boot Option #1/2/3
Specifies the overall boot order from the available devices. For example, you can set hard drive as the
first priority (Boot Option #1) and DVD ROM drive as the second priority (Boot Option #2). The list only
displays the device with the highest priority for a specific type. For example, only hard drive defined as the
first priority on the Hard Drive BBS Priorities submenu will be presented here.
Removable storage devices that support GPT format will be prefixed with "UEFI:" string on the boot device
list. To boot from an operating system that supports GPT partitioning, select the device prefixed with "UEFI:"
string.
Or if you want to install an operating system that supports GPT partitioning such as Windows 7 64-bit, select
the optical drive that contains the Windows 7 64-bit installation disk and is prefixed with "UEFI:" string.
&& Hard Drive/CD/DVD ROM Drive/Floppy Drive/Network Device BBS Priorities
Specifies the boot order for a specific device type, such as hard drives, optical drives, floppy disk drives,
and devices that support Boot from LAN function, etc. Press <Enter> on this item to enter the submenu that
presents the devices of the same type that are connected. This item is present only if at least one device
for this type is installed.
&& Redirection Support
Enables or disables support for Redirection.
Allows you to determine whether to change the boot order when a new device is added.
Dedault
Keeps the previous boot order settings. (Default)
Place
First Set the newly added device as the first boot device.
Place
Last
Set the newly added device as the last boot device.
&& New Boot Option Policy
- 25 -
2-5 Save & Exit
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Main
Advanced
Security
Boot
Save & Exit
Save Changes and Reset
Discard Changes and Reset
Save Changes
Discard Changes
Default Options
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
Launch EFI Shell from filesystem device
gf: Select Screen
hi: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.17.1249. Copyright (C) 2015 American Megatrends, Inc.
&& Save Changes and Reset
Press <Enter> on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup
program. Select No or press <Esc> to return to the BIOS Setup Main Menu.
&& Discard Changes and Reset
Press <Enter> on this item and select Yes. This exits the BIOS Setup without saving the changes made
in BIOS Setup to the CMOS. Select No or press <Esc> to return to the BIOS Setup Main Menu.
&& Save Changes
Press <Enter> on this item and select Yes to save the changes to the CMOS. Select No or press <Esc>
to return to the BIOS Setup Main Menu.
&& Discard Changes
Press <Enter> on this item and select Yes to cancel the BIOS changes. Select No or press <Esc> to return
to the BIOS Setup Main Menu.
&& Restore Defaults
Press <Enter> on this item and select Yes to load the BIOS factory default settings. The BIOS defaults
settings help the system to operate in optimum state. Always load the Optimized defaults after updating
the BIOS or after clearing the CMOS values.
&& Save as User Defaults
Save to current BIOS settings as user-defined default settings.
Load the user-define default settings for all BIOS options.
Allows you to select a device to boot immediately. Press <Enter> on the device you select and select Yes
to confirm. Your system will restart automatically and boot from that device.
&& Restore User Defaults
&& Boot Override
&& Launch EFI Shell from filesystem device
Allows you to launch the EFI Shell application (shell.efi) from one of the available filesystem devices. Press
<Enter> on this option and the system will restart to the EFI Shell screen automatically.
- 26 -
Chapter 3 Appendix
Drivers Installation
•• Before installing the drivers, first install the operating system. (The following instructions use
Windows 8.1 as the example operating system.)
•• After installing the operating system, insert the motherboard driver disk into your optical drive. Click
on the message "Tap to choose what happens with this disc" on the top-right corner of the screen
and select "Run Run.exe." (Or go to My Computer, double-click the optical drive and execute the
Run.exe program.)
"Xpress Install" will automatically scan your system and then list all of the drivers that are recommended to
install. You can click the Xpress Install button and "Xpress Install" will install all of the selected drivers. Or click
the arrow
icon to individually install the drivers you need.
- 27 -
Regulatory Statements
Regulatory Notices
This document must not be copied without our written permission, and the contents there of must not be imparted
to a third party nor be used for any unauthorized purpose.
Contravention will be prosecuted. We believe that the information contained herein was accurate in all respects
at the time of printing. GIGABYTE cannot, however, assume any responsibility for errors or omissions in this text.
Also note that the information in this document is subject to change without notice and should not be construed
as a commitment by GIGABYTE.
Our Commitment to Preserving the Environment
In addition to high-efficiency performance, all GIGABYTE motherboards fulfill European Union regulations
for RoHS (Restriction of Certain Hazardous Substances in Electrical and Electronic Equipment) and WEEE
(Waste Electrical and Electronic Equipment) environmental directives, as well as most major worldwide safety
requirements. To prevent releases of harmful substances into the environment and to maximize the use of our
natural resources, GIGABYTE provides the following information on how you can responsibly recycle or reuse
most of the materials in your "end of life" product.
Restriction of Hazardous Substances (RoHS) Directive Statement
GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE
and PBB). The parts and components have been carefully selected to meet RoHS requirement. Moreover, we at
GIGABYTE are continuing our efforts to develop products that do not use internationally banned toxic chemicals.
Waste Electrical & Electronic Equipment (WEEE) Directive Statement
GIGABYTE will fulfill the national laws as interpreted from the 2002/96/EC WEEE (Waste Electrical and Electronic
Equipment) directive. The WEEE Directive specifies the treatment, collection, recycling and disposal of electric
and electronic devices and their components. Under the Directive, used equipment must be marked, collected
separately, and disposed of properly.
WEEE Symbol Statement
The symbol shown below is on the product or on its packaging, which indicates that this product
must not be disposed of with other waste. Instead, the device should be taken to the waste collection
centers for activation of the treatment, collection, recycling and disposal procedure. The separate
collection and recycling of your waste equipment at the time of disposal will help to conserve natural
resources and ensure that it is recycled in a manner that protects human health and the environment.
For more information about where you can drop off your waste equipment for recycling, please contact your
local government office, your household waste disposal service or where you purchased the product for details
of environmentally safe recycling.
ŠŠ When your electrical or electronic equipment is no longer useful to you, "take it back" to your local or regional
waste collection administration for recycling.
ŠŠ If you need further assistance in recycling, reusing in your "end of life" product, you may contact us at the
Customer Care number listed in your product's user's manual and we will be glad to help you with your effort.
Finally, we suggest that you practice other environmentally friendly actions by understanding and using the
energy-saving features of this product (where applicable), recycling the inner and outer packaging (including
shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly.
With your help, we can reduce the amount of natural resources needed to produce electrical and electronic
equipment, minimize the use of landfills for the disposal of "end of life" products, and generally improve our
quality of life by ensuring that potentially hazardous substances are not released into the environment and are
disposed of properly.
- 28 -
FCC Notice (U.S.A. Only)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
ŠŠ Reorient or relocate the receiving antenna.
ŠŠ Increase the separation between the equipment and receiver.
ŠŠ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
ŠŠ Consult a dealer or experienced TV/radio technician for help.
Canada, Industry Canada (IC) Notices / Canada, avis d'Industry Canada (IC)
ŠŠ This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.
ŠŠ Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.
ŠŠ Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210.
ŠŠ Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer
d'interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent
affecter son fonctionnement.
- 29 -
- 30 -
- 31 -
Contact Us
GIGA-BYTE TECHNOLOGY CO., LTD.
Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan
TEL: +886-2-8912-4000, FAX: +886-2-8912-4005
Tech. and Non-Tech. Support (Sales/Marketing) : http://esupport.gigabyte.com
WEB address (English): http://www.gigabyte.com
WEB address (Chinese): http://www.gigabyte.tw
•• GIGABYTE eSupport
To submit a technical or non-technical (Sales/Marketing) question, please link to:
http://esupport.gigabyte.com
- 32 -
Open as PDF
Similar pages