FLIR FC Series Infrared Traffic Camera Datasheet

FLIR FC-T Series
Thermal imaging sensors for traffic monitoring
FLIR FC-T sensors are perfect for traffic monitoring. The thermal
sensor can “see” vehicles in all conditions. Vehicles in traffic look the
same to the sensor in broad day light or in the darkest of nights. They
can operate in poor weather and through light fog. Thermal sensors
produce an image in practically all weather conditions and can even
see through certain types of smoke.
Thermal sensors are not hindered by reflections from sun glare,
shadows, or headlights on wet pavement.
FLIR FC-T sensors can be positioned so the horizon is in the field of
view. This allows for more advanced detection than typical optical
sensor systems.
• VEHICLE DETECTION AT INTERSECTIONS
• ROAD SIDE MONITORING
• MONITORING TRAFFIC IN TUNNELS
• HIGHWAY TRAFFIC MANAGEMENT
HIGH IMAGE QUALITY
The FLIR FC T-Series are equipped with a maintenance free uncooled
microbolometer detector that produces high quality thermal images on which
the smallest of details can be seen.
Normal vision
DIFFERENT LENS OPTIONS
FLIR Systems offers the FLIR FC T-Series with different lens options. They
are available with a 7.5mm, 9 mm, 13mm 19mm, or 35mm lens. Longer
lenses offer a narrower field of view so that you can see farther.
EASY TO INSTALL
All FLIR FC-T Series thermal imaging sensor can be installed on existing
infrastructure. There is no need for huge civil works or to open up the road.
They can be easily integrated into any existing infrastructure providing early
detection and visibility 24/7 all the year round. They also provide two methods
for connecting the video output cable: BNC and Connector-Less.
Thermal vision
DESIGNED FOR USE IN HARSH ENVIRONMENTS
The FC-T Series are extremely rugged systems. Their vital core is well
protected, meeting IP66 requirements, against dust and water ingress. They
operate between -50 ºC and +75 ºC. Perfect for all climates.
VIDEO ANALYTICS
The FLIR FC-T Series works perfectly together with video analytics, such as
FLIR’s VIP 3D Detection Boards. Thermal images are often used for vehicle
presence detection at signalized intersections, and for 24/7 traffic monitoring
www.flir.com
FC-T Series: version specific specifications
Sensor resolution
320 x 240
640 x 480
Name/Focal length/
Field of view
FC-363 T: 7.5 mm lens – FOV : 63° (H) x 50° (V)
FC-348 T: 9 mm lens – FOV : 48° (H) x 39° (V)FC334 T: 13 mm lens – FOV : 34° (H) x 28° (V)
FC-324 T: 19 mm lens – FOV : 24° (H) x 19° (V)
FC-313 T: 35 mm lens – FOV : 13° (H) x 10° (V)
FC-309 T: 35 mm lens – FOV : 9° (H) x 7° (V)
FC-690 T: 7.5 mm lens – FOV : 90° (H) x 69° (V)
FC-669 T: 9 mm lens – FOV : 69° (H) x 56° (V)
FC-645 T: 13 mm lens – FOV : 45° (H) x 37° (V)
FC-632 T: 19 mm lens – FOV : 32° (H) x 26° (V)
FC-618 T: 35 mm lens – FOV : 18° (H) x 14° (V)
Imaging Specifications
System Overview
FLIR FC-T Series
Approvals
Imaging performance
24.6 mm (0.97 in.)
EN55022:2010, Class A
Detector type
Focal Plane Array (FPA), uncooled
Vanadium Oxide (Vox) microbolometer
Spectral range
7.5 to 13.5µm
Thermal sensitivity
<50 mK f/1.0
Image frequency
NTSC: 30Hz
Focus
Focus free, athermal lens
Automatic Gain Control (AGC),
Digital Detail Enhancement (DDE)
Image processing
System features
Clears ice from windows
Automatic deicing, tested according
to MIL-STD-810F Method 521.1
Automatic heater
EN 61000-3-3: 2008
EN 61000-3-2: 2006+A1: 2009 & A2 2009
EN55024:2010
EN51030-4: 2011
FCC Part 15, Subpart B, Class A
IP 66 + IP 67 (IEC 60529)
IEC 60068-2-27
Standard package
Thermal imaging sensor, sun shield, operator manual
Image presentation
Video output
Thermal AGC Modes
Thermal AGC Region of
Interest (ROI)
Image Uniformity
Optimization
PAL or NTSC, analog
Auto AGC, Manual AGC, Plateau Equalization AGC,
Linear AGC, Auto Dynamic Detail Enhancement (DDE),
Max Gain Setting
Default, Presets and User definable to insure optimal
image quality on subjects of interest
Automatic Flat Field Correction (FFC) - Thermal and
Temporal Triggers
Power*
Requirements
90-240VAC, single phase
50-60Hz
Consumption
1.7 W nominal at 110 VAC
18 W peak with heaters
Environmental specifications
Operating
temperature range
Storage temperature range
Encapsulation
Shock
Vibration
-50°C to +75°C (Cold start: -40ºC to +70ºC)
-58°F to +167°F (Cold start: -40ºF to +158ºF)
Sensor Size (L x W x H)
BELGIUM
FLIR Systems Trading
Belgium BVBA
Luxemburgstraat 2
2321 Meer
Belgium
PH: +32 (0) 3665 5100
SANTA BARBARA
FLIR Systems, Inc.
70 Castilian Drive.
Goleta, CA 93117
USA
PH: +1 866.477.3687
FLIR T
Hospitaalweg 1B
B-8510 Marke
Belgium
PH: +32 (0)56 37 22 00
UK
FLIR Systems UK
2 Kings Hill Avenue
Kings Hill
West Malling - Kent
ME19 4AQ
United Kingdom
PH: +44 (0)1732 220 011
-55ºC to +85ºC (-67ºF to +185ºF)
IP66 + IP 67 (IEC 60529)
Mil-Std-810F
IEC 60068-2-27
Physical characteristics
Sensor Weight
PORTLAND
Corporate Headquarters
FLIR Systems, Inc.
27700 SW Parkway Ave.
Wilsonville, OR 97070
USA
PH: +1 866.477.3687
1.8 kg (3.97 lbs.) without sunshield
2.2 kg (4.85 lbs.) with sun shield
259 mm x 114 mm x 106 mm without sunshield
10.2 in. x 4.49 in. x 4.17 in. without sunshield
282 mm x 129 mm x 115 mm with sun shield
11.1 in. x 5.08 in. x 4.53 in. with sun shield
Shipping weight
(sensor + packaging)
2.8 kg (6.18 lbs.)
Shipping size
(sensor + packaging)
(L x W x H)
366 mm x 188 mm x 178 mm
14.41 in. x 7.40 in. x 7.01 in.
www.flir.com
NASDAQ: FLIR
Specifications are subject to change without notice
©Copyright 2014, FLIR Systems, Inc. All other brand and product names are trademarks of their respective
owners. The images displayed may not be representative of the actual resolution of the sensor shown. Images
for illustrative purposes only. (Created 10/14) IT_0016_EN
Distributed by:
Head Office
www.tacel.ca
www.flir.com
info@tacel.ca
179 Bartley Dr. Unit B
Toronto, ON M4A 1E6
Phone 416 750-4646
Toll Free 877 750-4646
416 750-4649
Fax
Open as PDF
Similar pages