User Manual for Air Conditioner (AC) APP Attach the Verification Code Here GWG03Eng-2 1. Downloading and installation of APP Scan the Quick Respond Code on the right with your mobile phone to download and install the WiFi air conditioner APP 2. User registration and login Run APP and click the following indicated icons（Register for WiFi AC complete registration and login. Create account Correctly input your real E-mail address as your registered account （so that you can retake your information and your password later ） and set password. Login）and follow APP instructions to 3. AC Management ADD AC After login, click the following indicated icons(AC MANAGEMENT Code ADD AC Create new name of AC Scan Quick Response OK ) and follow APP instructions to bind and link the account and air conditioner. After the account is bond, it will be the primary user of the air conditioner. normal Input name of air conditioner and click “Scan Quick Response Code ” on the below to scan the Quick Response Code on the down-left of air outlet or QR Code on the cover of user manual to get automatically. And then click OK to finish. ADD USER One AC should have only one master user. If it is to be used by multiple users, please add users by “ADD USER” function in AC MANAGEMENT by clicking the following indicated icons (ADD USER Input newly added user name(which has been registered) Select air conditioner OK) and follow APP instructions to finish setting. normal normal Input the new user account (must be registered) and select the air conditioner assigned for the user. Click OK to finish setting. Note: Only the primary user is permitted to add users. If not, it should change to primary user to get permission. It should unbind the current primary user and air conditioner in MY ACCOUNT before binding the new primary user by the above-mentioned procedure. 4. AC Network Connection Android phone network configuration Before using remote control, please connect your air conditioner with home WiFi. Please click the following indicated icons (Help Center AC Connect Select AC Select Network Next Step) and follow APP instructions to finish the network connection of the air conditioner. Select an air conditioner to be connected to network (default AC name is icongo_*). Select a network and input password. Click “Next Step” to finish setting. iPhone Network Connection Before using remote control, please connect your air conditioner with home WiFi. Please click the following indicated icons(Help Center AC Connect to Network Exit AC APP and enter WiFi setting interface of mobile phone to select AC network Enter AC APP interface again Select home network Input password Click connect）and follow APP instructions to finish the AC network connection. Select “setting” to enter WiFi setting interface. settings WIFI choose WIFI WIFI Back Select AC network icongo_* Click to return to APP interface Select home network (for your air conditioner) Input WiFi password and click "connect” to finish connection If the setting is incorrect or the router password has been changed, please press and hold the reset button 5S on the panel and then set again the AC network connection by following the above procedure of “Network Connection” 注意网络复位按键 Note ： Do not wrongly 位置以免误操作 press the Emergency Operation button. Network Reset button Emergency Operation button If you can't find the Network Reset button like on the picture above ,you can use the second way to reset the AC. The second way of reset is as follows: "set temperature by 25℃ on remote → press FAN SPEED button → press SWING button → press AIR FLOW button → then set temperature by 27 ℃ → press FAN SPEED button → press SWING button→ press AIR FLOW button". All these operatoins most be finished in 10S, or you must operate it again. 5. AC Control Log in with registered account and password, please click the following indicated icons（Input registered name and password Click Login Select air conditioner）and follow APP instructions to finish AC Control setting. Select the air conditioner to be controlled in AC LIST. Note:This mobile APP is a generic version. Maybe the air conditioner you have bought don't have all the function the APP can control. Please refer to the air conditioner you bought.