You can read the recommendations in the user guide, the technical guide or the installation guide for TP-LINK TL-PA101. You'll
find the answers to all your questions on the TP-LINK TL-PA101 in the user manual (information, specifications, safety advice,
size, accessories, etc.). Detailed instructions for use are in the User's Guide.
User manual TP-LINK TL-PA101
User guide TP-LINK TL-PA101
Operating instructions TP-LINK TL-PA101
Instructions for use TP-LINK TL-PA101
Instruction manual TP-LINK TL-PA101
You're reading an excerpt. Click here to read official TP-LINK TLPA101 user guide
http://yourpdfguides.com/dref/2374306
Manual abstract:
0.0 1910010102 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK
TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the
specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without
permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2008 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved.
http://www.tp-link.com I FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. @@@@If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures: · · · · Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. @@@@@@In a
domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
II CONTENTS Chapter 1 Chapter 2 2.1 2.2 2.3 2.4 2.5 Introduction .....
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
...1 Connecting Mechanism ..
..........
..........
.....
.....
..........
..........
.....
.....
..........
.......2 Introduction ...
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..... 2 LED Indicator.....
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
2 Physical Interface.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
... 3 Hardware Connection Computer ..
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
........ 3 Hardware Connection Internet ..
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.. @@@@@@@@@@@@Simply plug this 85Mbps Ethernet Powerline Adapter into an ordinary AC power outlet which will easily extend your
Cable/xDSL broadband connection or existing Ethernet (LAN) network to any other electrical outlet in any room of a house without the need of any new
cabling. This Ethernet Powerline Adapter supports up to 85Mbps data rate over the existing household power circuit. With data rates of 85Mbps, full
multimedia application can easily be supported throughout the whole house in addition to Internet access.
This Ethernet Powerline Adapter uses the existing power lines installed in a home as a path to transmit digital data, voice, audio and video between devices.
To ensure data communication's security and multimedia applications, this Ethernet Powerline Adapter support built-in 56-bit DES encryption and Quality of
Service features.With minimum setup, you can install and use this Ethernet Powerline Adapter within minutes. A. System Requirement a) At least two AC
100V ~ 240V power outlets with standard home power wiring b) A computer with the following: Operating System with TCP/IP installed Pentium III
compatible processor and above Ethernet LAN card installed with TCP/IP protocol 64 MB RAM or more 50 MB of free disk space (Minimum) CD-ROM
Drive B.
Package Contents The 85Mbps Ethernet Powerline Adapter package contains the following items: One 85Mbps Ethernet Powerline Adapter One Quick
Installation Guide One CAT-5 Ethernet Cable One CD-ROM (Utility / Manual / Quick Installation Guide) If any of the above items are damaged or missing,
please contact your dealer immediately. 1 TL-PA101 85Mbps Ethernet Powerline Adapter Chapter 2 2.1 Connecting Mechanism Introduction The Ethernet
Powerline Adapter support up to 85Mbps data rate. With this high speed connection rate, this Ethernet Powerline Adapter allows you to setup a high speed
home network by using your home existing electrical wiring. Simply plug this Ethernet Powerline Adapter into an ordinary power outlet to extend your
Cable/xDSL broadband connection or existing LAN network to any other electrical outlet in any rooms of your house. Take notes that this Ethernet Powerline
Adapter works in pairs. You need to plug one Ethernet Powerline Adapter into a power outlet for each computer (Connect to the computer LAN card) you
want to connect (Network access); you will also need another Ethernet Powerline Adapter connected to your Cable/xDSL broadband (Ethernet port) in order
to extend your broadband connection or Internet surfing. @@@@@@Power off your PC or Notebook. 2. @@@@4.
@@5. Turn on your computer. 6. @@@@Power off your PC or Notebook. 2. @@3. @@4. @@5. Turn on your computer. 6.
@@@@@@@@@@@@@@In most cases, only one device will display in this panel. @@@@@@@@@@@@Devices previously set up with the same
logical network (same network name) will appear in the device list afterward selecting this option. Set All Devices: The Set All Devices button is used to
change the logical network of all devices that appear on the Main configuration homepage whose Device's Password had been entered for the same logical
network. A dialog window will appear to report the success of this operation. For devices whose device passwords were not entered, this operation will fail
and will report a failure message.
4.3 Diagnostics The Diagnostics homepage shows the System Information and Remote Device History of all remote devices seen over a period of time which
are only readable. Click on the "Diagnostics" tab and the following screen display. 13 TL-PA101 85Mbps Ethernet Powerline Adapter The Diagnostics
information displayed can be saved to a text file. One can email the saved text file to the local supplier when there's technical support require or print the
saved text file as reference during a technical support conference.
The Upper Panel shows technical data concerning software and hardware present on the host computer which were used to communicate over Ethernet
Powerline Adapter on the Powerline network. @@@@All devices that were on the powerline network are listed here along with a few other parameters.
Ethernet Powerline Adapter devices that are active on the current logical network will show a transfer rate in the Rate column; devices on other networks, or
devices that may no longer exist are shown with a "?" in the Rate column. The following remote Ethernet Powerline Adapter devices information is available
from the diagnostics screen: Device Alias Name Device MAC Address Device Password Device Last known rate Device Last Known Network name Date
device last seen on the network 14 TL-PA101 85Mbps Ethernet Powerline Adapter The diagnostics information displayed may be saved to a text file for later
use, or can be printed for reference for a technical support call. Ethernet Powerline Adapter devices, which are not part of the network anymore, can be
deleted using the delete button. A dialog window pops up with a confirmation message if we try to delete a device whose password has been entered. 4.4
About The About homepage show the Management Utility software version. AutoScan: When enabled (Place a check), the Management Utility will
automatically scan for Eth.
You're reading an excerpt. Click here to read official TP-LINK TLPA101 user guide
http://yourpdfguides.com/dref/2374306
Powered by TCPDF (www.tcpdf.org)
Open as PDF
Similar pages