MODEL
WSP-BT200
(Kiosk&Ticket Printer)
Rev. 3.0
WOOSIM SYSTEMS Inc.
#501, Daerung Technotown 3th,
448, Gasan-Dong, GeumChun-Ku,
Seoul, Korea
Tel : +82-2-2107-3700
Fax : +82-2-2107-3707
URL: http://www.woosim.com
All specifications are subjected to change without notice.
http://www.woosim.com
WSP-BT200 Rev. 3.0
¦ Copyright
WSP-BT200 Kiosk/Ticket printer operator’s manual.
Copyright ⓒ2012 by Woosim Systems Inc.
All rights reserved.
The information contained in this manual is the property of Woosim Systems Inc.
and may not be reproduced in whole or in part without the prior written permission
of Woosim Systems Inc.
¦ Trademark
a registered trademark of Woosim Systems Inc.
All other trademark are the properties of their respective companies.
¦ Caution
Some semiconductor devices are easily damaged by static electricity. You should
turn the printer “OFF”, before you connect or removed the cable on the rear side,
in order to guard the printer against the static electricity.
If the printer is damaged by the static electricity, you should turn the printer“OFF”.
¦ Notice
The contents of this manual are subject to change without notice.
http://www.woosim.com
2
WSP-BT200 Rev. 3.0
¦ Introduction
150mm/sec high-speed printer. The 2inch thermal panel printer is most suitable
for ticketing applications, such as transportation, coupons, industrial machine,
lottery, ATM and kiosks.
The general features of WSP-BT200 printer are as follows:
u Very silent printing thru direct thermal printing method.
u High speed(150mm/sec, MAX)
u High resolution(203dpi : 8dots/mm).
u Low power consumption.
u UART(RS-232C) Interface
u Supports text and graphic printing.
u Easier paper roll loading by CLAMSHELL design.
u Printer door open & Paper-out sensor
u Easy paper handling
u Auto cutting.
u Easier maintenance with self-diagnostic.
u In field programming – Update Firmware, Download Fonts and Logos
u Microsoft Windows XP / VISTA / 7 /
Windows CE / Linux / Android / Blackberry compatible.
u Flow control : Software (XON/XOFF)
※ Hardware flow control not supported in printer.
u Agency Approvals
http://www.woosim.com
3
WSP-BT200 Rev. 3.0
¦ Operating Precautions
Please follow the precautions below to enjoy and maintain the full
performance of the printer.
u Using the Printer
● Be careful not to drop or bump the printer on a hard surface.
● Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows:
◆ Operating temperature :-10°C to 50°C
◆ Relative humidity : 10% to 90% (No condensation)
● Do not install the printer near devices that generate strong
electromagnetic fields such as a copy machine.
● Do not open the platen cover during printing .
● Do not remove or reinstall the communication cable during printing
or transmission.
● Do not touch the connectors of the communication during printing.
● Switch the POWER OFF when not in use.
● Do not use alcohol or other solvent.
u Thermal Paper Handling
● Store the thermal paper in a cool, dry and dark place.
● Do not rub the paper with hard object.
● Do not leave the paper with hard object.
● Do not allow plastic film, erasers, or adhesive tape to touch the paper
for long periods.
● Do not stack the thermal paper with diazo copies immediately
after copying or wet-type copies.
● Do not use chemical glue.
● Always use the clean thermal paper.
http://www.woosim.com
4
WSP-BT200 Rev. 3.0
CONTENTS
1. Outline...........................................................................................................................................6
1.1. Model classifications ........................................................................................................6
1.2. Product Part Number System .........................................................................................6
1.3. Specifications .....................................................................................................................7
2. Setting up the printer ...............................................................................................................8
2.1. Printer & Accessories .......................................................................................................8
2.2. Printer Features .................................................................................................................9
2.3. Dimensions .......................................................................................................................10
2.4. Replacing the paper roll ................................................................................................11
2.5. Power Supply ...................................................................................................................12
2.5.1. Power connector ..................................................................................................12
2.5.2. Specified Power supply .......................................................................................12
2.6. Sensor................................................................................................................................13
3. Interface ......................................................................................................................................14
3.1. UART (RS-232C or TTL) ..................................................................................................14
4. Using the printer ......................................................................................................................15
4.1. Control panel ...................................................................................................................15
4.2. The self test ......................................................................................................................16
5. Consumable Parts ....................................................................................................................17
5.1. Recommended paper .....................................................................................................17
5.2. Printing position ..............................................................................................................17
6. Revision History .......................................................................................................................18
http://www.woosim.com
5
WSP-BT200 Rev. 3.0
1. Outline
1.1. Model classifications
WSP-BT200 (
)
(
)
Model name
Interface
None: UART
Power
None : DC 24V
1.2. Product Par t Number System
Model name
/
Interface Spec.
Wired
S40
SC30
W25
.
.
.
Example) 1. Porti-S40
Wireless
A
RS-232C
1
Bluetooth
B
TTL
2
IrDA
C
USB
0
None
D
RS-485
E
Parallel
Z
None
Serial/Bluetooth Part No. ⇒ S40/A1
2. Porti-SC30 Bluetooth Only
Part No.
⇒ SC30/Z1
http://www.woosim.com
6
WSP-BT200 Rev. 3.0
1.3. Specifications
Item
Specification
Printing method
Direct thermal line printing
Characters per line
42cpl (MAX)
Character size
Eng. : 9*24dots, 12*24dots
Kor. : 16*24dots, [24*24dots]
Simplified/Traditional Chinese, Arabic, Cyrillic, Russian, Tukish,
Optional Characters
Greek, Japanese, Persian, Latin9 and Others upon request.
Resolution
203dpi, 8dots/mm
Print width
2-inch (56mm, 448dots)
60 - 0.5 mm wide (Thermal roll paper)
Paper width
Paper thickness : 60±5 ㎛
Printing speed
150mm / sec (MAX)
Dimensions
99.8 * 87.1 * 86.3 (111.5) mm
Weight
533g (except roll paper)
Interface
UART (RS-232C)
1-dimension : Code128, Code39, I2/5, Code93, UPC-A, UPC-E, EAN8,
EAN13, CODABAR
Barcode supplied
2-dimension : PDF417, QR Code, DATA Matrix,
Micro PDF417, Truncated PDF417
Black mark
Support black mark detection
H/W Spec
MCU : 32bits RISC, FLASH : 4Mbytes, RAM : 8Mbytes
Receive buffer size
1M bytes
Input Power
24VDC, Max 3A
-10 °C ~ 50°C
(operating)
Temperature
-10°C ~ 70°C (storage)
Environment
conditions
30% - 80% (operating)
Humidity
10% - 90% (storage)
MCBF (Mean Cycle
Between failure)
Mechanical
Head
37,000,000 lines
Approximately 50 Km
< Table 1 >
http://www.woosim.com
7
WSP-BT200 Rev. 3.0
2. Setting up the printer
2.1. Printer & Accessories
When unpacking your printer box make sure it contains the printer and all accessories.
If any accessories are missing or damage, please contact your dealer for assistance.
WSP-BT200
http://www.woosim.com
8
WSP-BT200 Rev. 3.0
2.2. Printer Features
Connecting Ground Cable to
Ground(0V) or to the land,
if Ground Cable is not correctly
connected, it will cause malfunctioning
or the printer will be damaged.
http://www.woosim.com
9
WSP-BT200 Rev. 3.0
2.3. Dimensions
http://www.woosim.com
10
WSP-BT200 Rev. 3.0
2.4. Replacing the paper roll
Note : Be sure to use paper rolls that meet the specifications.
Do not use paper rolls that have the paper glued to the core because
the printer can not detect the paper end correctly.
1. Make sure that the printer is not receiving data; otherwise, data may be lost.
2. Remove the used paper roll core if there is one.
3. Insert the paper roll as shown.
http://www.woosim.com
11
WSP-BT200 Rev. 3.0
2.5. Power Supply
2.5.1. Power connector
The WSP-BT200 printer is equipped to an external supply electrical power.
The functions assigned to the pins in the connector are as follows:
WARNING
A wrong connection of power supply
connector could be damage the printer.
51004-0400 (MOLEX)
Applicable connector : MOLEX 53014-0410 or equivalent.
2.5.2. Specified Power supply
The following specifications are requested for Power supply.
Input : 24V DC / Max 3A
Avoid using power supply which its power capacity of power current is extremely
high.
http://www.woosim.com
12
WSP-BT200 Rev. 3.0
2.6. Sensor
① Sensor 1 : Paper Out Sensor
When using the general thermal paper, the sensor which detects the exhaust
presence of the paper.
② Sensor 2 : Black Mark Sensor
When using label paper etc., is detected with the black mark sensor.
③ Sensor 3 : Roll-End Sensor
Detects the remainder condition of the paper.
http://www.woosim.com
13
WSP-BT200 Rev. 3.0
3. Interface
3.1. UART (RS-232C or TTL)
The WSP-BT200 printer has a UART(RS-232C or TTL) interface and is connected
by means of 3 pin female connector. In the following table, the signals present on
the connector are listed:
Pin
Name
Direction
Function
1
TxD
Output
Transmit Data
2
RxD
Input
Receive Data
3
GND
-
Ground
<Molex : 51004-0300 >
Applicable connector : MOLEX 53014-0310 or equivalent.
http://www.woosim.com
14
WSP-BT200 Rev. 3.0
4. Using the printer
4.1. Control panel
u Button
- FEED Button :
When the printer is on, paper can be feed manually by pressing and
holding the FEED button for more than one second.
- CUTTER Button :
Cutter Button is used when once cutting the paper.
u Panel lamp
-POWER : Printer is ON and ready to receive data.
-ERROR : Indicates a fault condition or a printer error.
(i.e : no paper, etc.)
http://www.woosim.com
15
WSP-BT200 Rev. 3.0
4.2. The self test
The self test procedure will check most of the printer functions. For self test, turn
on the power while holding down the FEED Button.
The Self-Test checks the following :
1) Make sure paper roll has been installed properly.
2) The Self-Test prints the current printer status, which provides the control
ROM version and the communication method setting.
3) After printing the current printer status, Self-Test will print a pattern using
the built-in character set.
4) The Self-Test automatically ends.
The printer is ready to receive data as soon as it completed the self test.
http://www.woosim.com
16
WSP-BT200 Rev. 3.0
5. Consumable Par ts
5.1. Recommended paper
Type
: Thermal Paper
Paper width
: 60mm
Paper thickness
: 60±5㎛
Recording side
: Outside of roll
Cautions
1. Do not paste the paper to the core. And the roll paper which has near end
mark printing on its near end is recommended.
2. Chemicals or oil may change the color of paper, or printed characters may fade.
3. Change of paper color starts from approx . 70 °C.
Pay attention to heat, humidity and sun light.
4. Color of paper may be changed by being scratched by nail or hard metal, etc.
5.2. Printing position
http://www.woosim.com
17
WSP-BT200 Rev. 3.0
6. Revision Histor y
Date
Version
May. 11. 2012
3.0
Comments
Renewal (Spec. modify)
http://www.woosim.com
18
Open as PDF
Similar pages