QuickSpecs
HP 5800 Switch Series
Overview
HP 5800-24G-PoE+ Switch
HP 5800-24G Switch
HP 5800-24G-SFP Switch
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 1
QuickSpecs
HP 5800 Switch Series
Overview
HP 5800-48G-PoE Switch
HP 5800-48G Switch
HP 5800-48G Switch with 2 Slots
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 2
QuickSpecs
HP 5800 Switch Series
Overview
HP 5800AF-48G Switch
Models
HP 5800-24G-PoE+ Switch
HP 5800-24G Switch
HP 5800-24G-SFP Switch
HP 5800-48G-PoE Switch
HP 5800-48G Switch
HP 5800-48G Switch with 2 Slots
HP 5800AF-48G Switch
JC099A
JC100A
JC103A
JC104A
JC105A
JC101A
JG225A
Key features
For enterprise edge, distribution, data center
Cut-through design with low latency
Support for up to 84 ports
OAA module for flexible deployment
Redundant, hot-swappable power supplies, fans
Product overview
HP 5800 series switches offer an unmatched combination of Gigabit and 10-Gigabit Ethernet port density, high-availability
architecture, and full Layer 2 and Layer 3 dual-stack IPv4 and IPv6 capabilities. In addition to wire-speed line-rate performance on all
ports, the switches include patented Intelligent Resilient Framework (IRF) technology and Rapid Ring Protection Protocol (RRPP), which
allow local or geographically distributed HP 5800 switches to be interconnected for higher resiliency and performance. Available in PoE
and non-PoE models as well as 1 RU and 2 RU form factor configurations, HP 5800 switches are built on open standards and include an
open application architecture (OAA) module slot that enables flexible deployment options for new services. These versatile switches
are ideal for use in the network core of buildings or departments, or as high-performance switches in the convergence layer or network
edge of enterprise campus networks.
Features and benefits
Quality of Service (QoS)
Powerful QoS feature
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 3
QuickSpecs
HP 5800 Switch Series
Overview
creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS)
precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing,
weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin
(WDRR), and SP+WDRR
Integrated network services
with support for open application architecture (OAA) modules, extends and integrates application capability into the network
Ring Resiliency Protection Protocol (RRPP)
provides fast recovery for ring Ethernet-based topology; provides consistent application performance for applications such as
VoIP
Management
Remote configuration and management
is available through a secure Web browser or a command-line interface (CLI)
IEEE 802.1ab LLDP discovery
advertises and receives management information from adjacent devices on a network
USB support:
File copy
allows users to copy switch files to and from a USB flash drive
DHCP options:
DNS Relay and SMTP Redirection
DHCP: Server (RFC 2131), Client, and Option-82 Relay (RFC 3046)
sFlow
provides scalable, ASIC-based network monitoring and accounting; this allows network operators to gather a variety of
sophisticated network statistics and information for capacity planning and real-time network monitoring purposes
SNMPv1, v2c, and v3
facilitate centralized discovery, monitoring, and secure management of networking devices
Network Time Protocol (NTP)
synchronizes timekeeping among distributed time servers and clients; keeps consistent timekeeping among all clock-dependent
devices within the network so that the devices can provide diverse applications based on the consistent time
Connectivity
High-density port connectivity
supports up to 84 1-Gigabit ports per unit (612 per stack)
Auto-MDIX
automatically adjusts for straight-through or crossover cables on all 10/100 ports
Jumbo frames
on Gigabit Ethernet and 10-Gigabit ports, jumbo frames of 9k size allow high-performance remote backup and disaster-recovery
services
IEEE 802.3af Power over Ethernet (PoE)
provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and
security cameras
IEEE 802.3at Power over Ethernet (PoE+) support
simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying
local power at each access point location
IPv6 native support
IPv6 host
enables switches to be managed and deployed at the IPv6 network's edge
Dual stack (IPv4/IPv6)
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 4
QuickSpecs
HP 5800 Switch Series
Overview
transitions from IPv4 to IPv6, supporting connectivity for both protocols
MLD snooping
forwards IPv6 multicast traffic to the appropriate interface
IPv6 ACL/QoS
supports ACL and QoS for IPv6 network traffic, preventing traffic flooding
IPv6 routing
supports IPv6 static routes and IPv6 versions of RIP, OSPF, IS-IS, and BGP routing protocols
Performance
Hardware-based wire-speed access control lists (ACLs)
feature-rich ACL implementation (TCAM-based) helps provide high levels of security and ease of administration without
impacting network performance
Unique versatile architecture
supports the best of both fixed-port and modular configurations
Resiliency and high availability
Data center–optimized design
the HP 5800AF-48G Switch (JG225A) supports front-to-back/back-to-front airflow for hot/cold aisles, rear rack mounts, and
redundant hot-swappable AC or DC power and fans
Manageability
Full-featured console
provides complete control of the switch with a familiar command-line interface (CLI)
Web interface
allows configuration of the switch from any Web browser on the network
RMON and sFlow
provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Multiple configuration files
allow multiple configuration files to be stored to a flash image
Troubleshooting
Ingress and egress port monitoring
enable network problem solving
Traceroute and ping
enable testing of network connectivity
Virtual cable tests
provide visibility to cable problems
Layer 2 switching
GARP VLAN Registration Protocol:
allows automatic learning and dynamic assignment of VLANs
32K MAC addresses
provide access to many Layer 2 devices
4,094 port-based VLANs
provide security between workgroups
IEEE 802.1ad QinQ and Selective QinQ
increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed
campus or metro network
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 5
QuickSpecs
HP 5800 Switch Series
Overview
Gigabit Ethernet port aggregation
allows grouping of ports to increase overall data throughput to a remote device
10 GbE port aggregation
allows grouping of ports to increase overall data throughput to a remote device
Spanning Tree/MSTP, RSTP, and STP Root Guard
prevent network loops
IPFIX/sFlow
allows traffic sampling
Spanning Tree Protocols (STP, MSTP, and RSTP) and STP root guard
helps prevent network loops; up to 32 MSTP instances available
Layer 3 services
Address Resolution Protocol (ARP)
determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of
duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2
network
Dynamic Host Configuration Protocol (DHCP)
simplifies the management of large IP networks and supports client and server; DHCP Relay enables DHCP operation across
subnets
Layer 3 routing
Layer 3 IPv4 routing
provides routing of IPv4 at media speed; supports static routes, RIP and RIPv2, OSPF, IS-IS, and BGP
RIP and RIPng support
provides complete support of RIP for both IPv4 and IPv6
OSPF and OSPFv3 support
provides complete support of OSPF for both IPv4 and IPv6
IS-IS and IS-ISv6 support
provides complete support of IS-IS for both IPv4 and IPv6
Layer 3 IPv6 routing
provides routing of IPv6 at media speed; supports static routes, RIPng, OSPFv3, IS-ISv6, and BGP4+
Bidirectional Forwarding Detection (BFD)
enables link connectivity monitoring and reduces network convergence time for RIP, OSPF, BGP, IS-IS, VRRP, MPLS, and IRF
Virtual Router Redundancy Protocol (VRRP) and VRRP Extended
allow quick failover of router ports
Policy-based routing
makes routing decisions based on policies set by the network administrator
IGMPv1, v2, and v3
allow individual hosts to be registered on a particular VLAN
PIM-SSM, PIM-DM, and PIM-SM (for IPv4 and IPv6)
support IP Multicast address management and inhibition of DoS attacks
Equal-Cost Multipath (ECMP)
enables multiple equal-cost links in a routing environment to increase link redundancy and scale bandwidth
NEW MPLS support
provides extended support of MPLS, including MPLS VPNs and MPLS Traffic Engineering (MPLS TE)
NEW VPLS support
provides extended support of VPLS for data center to data center communication at Layer 2; provides support of hierarchical
VPLS for scalability
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 6
QuickSpecs
HP 5800 Switch Series
Overview
Security
Unicast Reverse Path Forwarding (URPF)
allows normal packets to be forwarded correctly, but discards the attaching packet due to lack of reverse path route or incorrect
inbound interface; prevents source spoofing and distributed attacks; supports distributed UFPF
Defense-in-depth security
provides integrated and distributed security enforcement that can be managed from a central location, such as the HP Intelligent
Management Center (IMC)
Advanced processor queuing mechanism
helps prevent denial-of-service (DoS) attacks, while DHCP snooping helps ensure that devices can only receive an IP address
from a legitimate DHCP server on the network
IEEE 802.1X-based dynamic delivery of QoS, ACLs, and VLANs
allows complete control over user network access
Guest VLAN
similar to IEEE 802.1X, it provides a browser-based environment to authenticated clients
Port isolation
secures and adds privacy, and prevents malicious attackers from obtaining user information
MAC-based authentication
allows or denies access to the switch based on client MAC address
HTTPS management
provides secure Web management
Multi-Customer Edge (MCE)-Multicast Virtual Routing and Forwarding (MVRF)
provide MPLS Edge router support
Public Key Infrastructure (PKI)
is used to control access
RADIUS/HWTACACS
eases switch management security administration by using a password authentication server
Secure Shell (SSHv2)
encrypts all transmitted data for secure, remote CLI access over IP networks
IP Source Guard
helps prevent IP spoofing attacks; filters packets on a per-port basis, which prevents illegal packets from being forwarded
Access control lists (ACLs)
helps provide high levels of security and ease of administration; 6k ingress entries and 1k egress entries (IPv4 and IPv6)
Convergence
Voice VLAN
automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance
Internet Group Management Protocol (IGMP)
is used by IP hosts to establish and maintain multicast groups; supports v1, v2, and v3; utilizes Any-Source Multicast (ASM) or
Source-Specific Multicast (SSM) to manage IPv4 multicast networks
Protocol Independent Multicast (PIM)
is used for IPv4 and IPv6 multicast applications; supports PIM Dense Mode (DM), Sparse Mode (SM), and Source-Specific Mode
(SSM)
LLDP-MED (Media Endpoint Discovery)
is a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network
devices such as IP phones
Monitor and diagnostics
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 7
QuickSpecs
HP 5800 Switch Series
Overview
Port mirroring
enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
OAM (IEEE 802.3ah)
operational, administration and maintenance (OAM) management capabilities detects data link layer problems that occurred in
the "last mile"; monitors the status of the link between the two devices
CFD (IEEE 802.1ag)
connectivity fault detection (CFD) provides a Layer 2 link OAM mechanism used for link connectivity detection and fault locating
Additional information
HP Intelligent Resilient Framework (IRF)
Creates virtual resilient switching fabrics, where two or more switches perform as a single Layer 2 switch and Layer 3
router
Switches do not have to be co-located and can be part of a disaster-recovery system
Servers or switches can be attached using standard LACP for automatic load balancing and high availability
Simplifies network operation by eliminating the complexity of Spanning Tree Protocol, ECMP, or VRRP
OAA modules
support wireless network management and high-performance security applications; leverage network infrastructure
investment
Green IT and power
use the latest advances in silicon development, shut off unused ports, and use variable-speed fans to improve energy efficiency
Higher scalability with IRF
simplifies the architecture of server access networks and reduces cost and complexity; up to nine 5800 Switches can be
combined to deliver unmatched scalability of virtualized access layer switches and flatter, two-tier FlexFabric networks
Warranty and support
Lifetime warranty
for as long as you own the product with advance replacement and next-business-day delivery (available in most countries)†
Electronic and telephone support
limited electronic and telephone support is available from HP; to reach our support centers, refer to:
www.hp.com/networking/contact-support; for details on the duration of support provided with your product purchase, refer to:
www.hp.com/networking/warrantysummary
Software releases
to find software for your product, refer to: www.hp.com/networking/support; for details on the software releases available with
your product purchase, refer to: www.hp.com/networking/warrantysummary
†HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day advance
replacement (available in most countries). The disk drive included with HP AllianceOne Advanced Services and Services zl Modules, HP
Threat Management Services zl Module, HP AllianceOne Extended zl Module with Riverbed Steelhead, HP MSM765zl Mobility Controller
and HP Survivable Branch Communication zl Module powered by Microsoft Lync has a five-year hardware warranty. For details, refer to
the Software license and hardware warranty statements at: www.hp.com/networking/warranty.
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 8
QuickSpecs
HP 5800 Switch Series
Configuration
Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.
Standard Switch Chassis
HP 5800-24G Switch
24 RJ-45 autosensing 10/100/1000 ports
1 extended module slot
4 fixed 1000/10000 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power Supply included
1U - Height
JC100A
See Configuration
Note:1, 3
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JC100A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JC100A#B2C
HP 5800-24G-PoE Switch
24 RJ-45 autosensing 10/100/1000 ports
1 extended module slot
4 fixed 1000/10000 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power Supply included
1U - Height
JC099A
See Configuration
Note:1, 3
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JC099A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JC099A#B2C
HP 5800-24G-SFP Switch
24 100/1000 SFP ports
min=0 \ max=24 SFP Transceivers
1 extended module slot
4 fixed 1000/10000 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Must select min 1 Power Supply
1U - Height
HP 5800-48G Switch
JC103A
See Configuration
Note:1, 4
JC105A
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 9
QuickSpecs
HP 5800 Switch Series
Configuration
48 RJ-45 autosensing 10/100/1000 ports
1 extended module slot
4 fixed 1000/10000 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power Supply included
1U- Height
See Configuration
Note:1, 3
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JC105A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JC105A#B2C
HP 5800AF-48G Switch
48 RJ-45 autosensing 10/100/1000 ports
6 fixed 1000/10000 SFP+ ports
min=0 \ max=6 SFP+ Transceivers
Must select min 1 Power Supply
Must select min 2 Fan Trays
1U- Height
JG225A
See Configuration
Note:1
HP 5800-48G-PoE Switch
48 RJ-45 autosensing 10/100/1000 ports
1 extended module slot
4 fixed 1000/10000 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power Supply included
1U - Height
JC104A
See Configuration
Note:1, 3
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JC104A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JC104A#B2C
HP 5800-48G Switch with 2 Slots
48 RJ-45 autosensing 10/100/1000 ports
2 extended module slot
4 fixed 1000 SFP ports
min=0 \ max=4 SFP Transceivers
Must select min 1 Power Supply
2U - Height
Configuration Rules
Note 1
The following Transceivers install into this switch:
HP X130 10G SFP+ LC SR Transceiver
HP X130 10G SFP+ LC LRM Transceiver
HP X130 10G SFP+ LC LR Transceiver
DA - 13807 Worldwide — Version 27 — June 10, 2014
JC101A
See Configuration
Note:4
JD092B
JD093B
JD094B
Page 10
QuickSpecs
HP 5800 Switch Series
Configuration
HP X130 10G SFP+ LC ER 40km Transceiver
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
Note 3
Localization required on orders without #B2B, #B2C or #B2E options.
Note 4
The following Transceivers install into this Switch:
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X110 100M SFP LC LH40 Transceiver
HP X110 100M SFP LC LH80 Transceiver
HP X115 100M SFP LC FX Transceiver
HP X110 100M SFP LC LX Transceiver
HP X115 100M SFP LC BX 10-U Transceiver
HP X115 100M SFP LC BX 10-D Transceiver
HP X125 1G SFP LC LH70 Transceiver
Note 7
JG234A
JD061A
JD062A
JD118B
JD119B
JD063B
JD089B
JD095C
JD096C
JD097C
JG081C
JD061A
JD062A
JD089B
JD118B
JD119B
JD090A
JD091A
JD102B
JD120B
JD100A
JD101A
JD063B
#B2E is Offered only NA, Mexico, Taiwan, and Japan.
Box Level Integration CTO Models
CTO Solution Sku
HP 58xx CTO Switch Solution
SSP trigger sku
JG478A
CTO Base Sku
HP 5800-24G Switch
JC100A
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 11
QuickSpecs
HP 5800 Switch Series
Configuration
24 RJ-45 autosensing 10/100/1000 ports
1 extended module slot
4 fixed 1000/10000 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power Supply included
1U - Height
See Configuration
Note:1, 3, 6,10, 11
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JC100A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JC100A#B2C
HP 5800-24G-PoE Switch
24 RJ-45 autosensing 10/100/1000 ports
1 extended module slot
4 fixed 1000/10000 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power Supply included
1U - Height
JC099A
See Configuration
Note:1, 3, 6,10, 11
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JC099A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JC099A#B2C
HP 5800-24G-SFP Switch
24 100/1000 SFP ports
min=0 \ max=24 SFP Transceivers
1 extended module slot
4 fixed 1000/10000 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Must select min 1 Power Supply
1U - Height
JC103A
See Configuration
Note:1, 4, 5,10
HP 5800-48G Switch
48 RJ-45 autosensing 10/100/1000 ports
1 extended module slot
4 fixed 1000/10000 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power Supply included
1U- Height
JC105A
See Configuration
Note:1, 3, 6,10, 11
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JC105A#B2B
PDU Cable ROW
JC105A#B2C
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 12
QuickSpecs
HP 5800 Switch Series
Configuration
C15 PDU Jumper Cord (ROW)
HP 5800AF-48G Switch
48 RJ-45 autosensing 10/100/1000 ports
6 fixed 1000/10000 SFP+ ports (min=0 \ max=6 SFP+ Transceivers)
Must select min 1 Power Supply
Must select min 2 Fan Trays
1U - Height
JG225A
See Configuration
Note:1, 8, 10
HP 5800-48G-PoE Switch
48 RJ-45 autosensing 10/100/1000 ports
1 extended module slot
4 fixed 1000/10000 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power Supply included
1U - Height
JC104A
See Configuration
Note:1, 3, 6,10, 11
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JC104A#B2B
C15 PDU ROW
C15 PDU Jumper Cord (ROW)
JC104A#B2C
HP 5800-48G Switch with 2 Slots
48 RJ-45 autosensing 10/100/1000 ports
2 extended module slot
4 fixed 1000 SFP ports
min=0 \ max=4 SFP Transceivers
Must select min 1 Power Supply
2U - Height
JC101A
See Configuration
Note:4, 5,10
Configuration Rules
Note 1
The following Transceivers install into this switch: (Use #0D1 or #B01 if switch is CTO) If
Applicable HP X130 10G SFP+ LC SR Transceiver
HP X130 10G SFP+ LC LRM Transceiver
HP X130 10G SFP+ LC LR Transceiver
HP X130 10G SFP+ LC ER 40km Transceiver
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
DA - 13807 Worldwide — Version 27 — June 10, 2014
JD092B
JD093B
JD094B
JG234A
JD061A
JD062A
JD118B
JD119B
JD063B
JD089B
JD095C
Page 13
QuickSpecs
HP 5800 Switch Series
Configuration
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
Note 3
Localization required on orders without #B2B, #B2C or #B2E options.
Note 4
The following Transceivers install into this Switch: (Use #0D1 if switch is CTO) If
Applicable HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X110 100M SFP LC LH40 Transceiver
HP X110 100M SFP LC LH80 Transceiver
HP X115 100M SFP LC FX Transceiver
HP X110 100M SFP LC LX Transceiver
HP X115 100M SFP LC BX 10-U Transceiver
HP X115 100M SFP LC BX 10-D Transceiver
HP X125 1G SFP LC LH70 Transceiver
Note 5
JD096C
JD097C
JG081C
JD061A
JD062A
JD089B
JD118B
JD119B
JD090A
JD091A
JD102B
JD120B
JD100A
JD101A
JD063B
If this Switch is selected at least one of these Power Supply with #0D1 is required:
HP 5500 150WAC Power Supply
HP 5800 300W AC Power Supply
HP 5800 750W AC Power Supply
JD362A
JC087A
JC089A
Note 6
If this Switch is selected, Then a Minimum of one of the following must be included:
1. 1 factory integrated accessory per switch. See Menu below, option must be ether #0D1 or #B01.
or
2. A Factory Express Service. (For Watson and CLIC Only: See Factory Express Tab on Menu)
Note 8
If this Switch is selected at least one of these Power Supply with #0D1 is required:
JC680A - HP A58x0AF 650W AC Power Supply
JC681A - HP 58x0AF 650W DC Power Supply
Note 9
B2E is Offered only in . NA, Mexico, Taiwan, and Japan.
Note 10
If the Switch Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is required on the Switch
Chassis and integrated to the JG478A - HP 58xx CTO Enablement. (Min 1/Max 1 Switch per SSP)
Note 11
If this Switch is selected, Then a Minimum of 1 factory integrated accessory, OR Factory Service, must be
ordered and integrated to CTO chassis. See Menu below, option must have a #0D1 to be integrated to the
CTO Chassis.
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 14
QuickSpecs
HP 5800 Switch Series
Configuration
Rack Level Integration CTO Models
Standard Switch Chassis
HP 5800-24G Switch
24 RJ-45 autosensing 10/100/1000 ports
1 extended module slot
4 fixed 1000/10000 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power Supply included
1U - Height
JC100A
See Configuration
Note:1, 3, 10
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JC100A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JC100A#B2C
HP 5800-24G-PoE Switch
24 RJ-45 autosensing 10/100/1000 ports
1 extended module slot
4 fixed 1000/10000 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power Supply included
1U - Height
JC099A
See Configuration
Note:1, 3, 10
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JC099A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JC099A#B2C
HP 5800-24G-SFP Switch
24 100/1000 SFP ports
min=0 \ max=24 SFP Transceivers
1 extended module slot
4 fixed 1000/10000 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Must select min 1 Power Supply
1U - Height
HP 5800-48G Switch
JC103A
See Configuration
Note:1, 4, 10
JC105A
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 15
QuickSpecs
HP 5800 Switch Series
Configuration
48 RJ-45 autosensing 10/100/1000 ports
1 extended module slot
4 fixed 1000/10000 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power Supply included
1U- Height
See Configuration
Note:1, 3, 10
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JC105A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JC105A#B2C
HP 5800AF-48G Switch
48 RJ-45 autosensing 10/100/1000 ports
6 fixed 1000/10000 SFP+ ports (min=0 \ max=6 SFP+ Transceivers)
Must select min 1 Power Supply
Must select min 2 Fan Trays
1U - Height
JG225A
See Configuration
Note:1, 8, 10
HP 5800-48G-PoE Switch
48 RJ-45 autosensing 10/100/1000 ports
1 extended module slot
4 fixed 1000/10000 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power Supply included
1U - Height
JC104A
See Configuration
Note:1, 3, 10
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JC104A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JC104A#B2C
HP 5800-48G Switch with 2 Slots
48 RJ-45 autosensing 10/100/1000 ports
2 extended module slot
4 fixed 1000 SFP ports
min=0 \ max=4 SFP Transceivers
Must select min 1 Power Supply
2U - Height
JC101A
See Configuration
Note:4, 10
Configuration Rules:
Note 1
The following Transceivers install into this switch:
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 16
QuickSpecs
HP 5800 Switch Series
Configuration
HP X130 10G SFP+ LC SR Transceiver
HP X130 10G SFP+ LC LRM Transceiver
HP X130 10G SFP+ LC LR Transceiver
HP X130 10G SFP+ LC ER 40km Transceiver
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JD092B
JD093B
JD094B
JG234A
JD061A
JD062A
JD118B
JD119B
JD063B
JD089B
JD095C
JD096C
JD097C
JG081C
Note 3
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See Localization
Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power
Cable option on the Switches/Routers.
Note 4
The following Transceivers install into this Switch:
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X110 100M SFP LC LH40 Transceiver
HP X110 100M SFP LC LH80 Transceiver
HP X115 100M SFP LC FX Transceiver
HP X110 100M SFP LC LX Transceiver
HP X115 100M SFP LC BX 10-U Transceiver
HP X115 100M SFP LC BX 10-D Transceiver
HP X125 1G SFP LC LH70 Transceiver
JD061A
JD062A
JD089B
JD118B
JD119B
JD090A
JD091A
JD102B
JD120B
JD100A
JD101A
JD063B
Note 8
Switch Height is 2U if the JC682A - HP A58x0AF Bck(pwr)-Frt(ports) Fan Tray is ordered #0D1 with this
switch.
REMARK: This only applies for CTO Rack Level Integration.
Note 10
If HP CTO Switch Chassis is selected for Rack Level Integration, Then the Switch needs to integrate (with
#0D1) to the HP Rack.
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Modules
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 17
QuickSpecs
HP 5800 Switch Series
Configuration
Ethernet Modules
(JC101x, JG242x, Switch Only ) System (std 0 // max 2) User Selection (min 0 // max 2) per chassis
(JC100x, JC099x, JC103x, JC105x, JC104x, JG254x, JG255x, JG256x, JG257x, JG258x, Switch Only )
System (std 0 // max 1) User Selection (min 0 // max 1) per chassis
HP 5800 16-port SFP Module
min=0 \ max=16 SFP Transceivers
JC095A
See Configuration
Note:2
HP 5800 4-port 10GbE SFP+ Module
min=0 \ max=4 SFP and SFP + Transceivers
JC091A
See Configuration
Note:1
HP 5800 2-port 10GbE SFP+ Module
min=0 \ max=2 SFP and SFP + Transceivers
JC092B
See Configuration
Note:1
HP 5800 16-port Gig-T Module
No Transceivers
JC094A
Configuration Rules:
Note 1
The following Transceivers install into this Module: (Use #0D1 if switch is CTO) If
Applicable HP X130 10G SFP+ LC SR Transceiver
HP X130 10G SFP+ LC LRM Transceiver
HP X130 10G SFP+ LC LR Transceiver
HP X130 10G SFP+ LC ER 40km Transceiver
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
Note 2
JD092B
JD093B
JD094B
JG234A
JD061A
JD062A
JD118B
JD119B
JD063B
JD089B
JD095C
JD096C
JD097C
JG081C
The following Transceivers install into this Module: (Use #0D1 if switch is CTO) If
Applicable HP X125 1G SFP LC LH40 1310nm Transceiver
DA - 13807 Worldwide — Version 27 — June 10, 2014
JD061A
Page 18
QuickSpecs
HP 5800 Switch Series
Configuration
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X110 100M SFP LC LH40 Transceiver
HP X110 100M SFP LC LH80 Transceiver
HP X115 100M SFP LC FX Transceiver
HP X110 100M SFP LC LX Transceiver
HP X115 100M SFP LC BX 10-U Transceiver
HP X115 100M SFP LC BX 10-D Transceiver
HP X125 1G SFP LC LH70 Transceiver
JD062A
JD089B
JD118B
JD119B
JD090A
JD091A
JD102B
JD120B
JD100A
JD101A
JD063B
Access Control Modules
(JC101x and JG242x Switch Only ) System (std 0 // max 1) User Selection (min 0 // max 1) per chassis
HP 5800 ACM for 32-64 Aps
No Transceivers
JD443A
HP 5800 ACM for 64-256 Aps
No Transceivers
JD441A
See Configuration
Note:1
HP 5820 VPN Firewall Module
No Transceivers
JD255A
See Configuration
Note:1
Configuration Rules:
Note 1
This Module install to the following switches only:
JC101x - HP 5800-48G Switch with 2 Slots
PoE Modules
(JC101x and JG242x Switch Only ) System (std 0 // max 1) User Selection (min 0 // max 1) per chassis
HP 5800 PoE Module
No Transceivers
JC097B
Transceivers
SFP+ Transceivers
HP X130 10G SFP+ LC SR Transceiver
HP X130 10G SFP+ LC LRM Transceiver
JD092B
JD093B
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 19
QuickSpecs
HP 5800 Switch Series
Configuration
HP X130 10G SFP+ LC LR Transceiver
HP X130 10G SFP+ LC ER 40km Transceiver
HP X240 10G SFP+ SFP+ 0.65m DAC Cable
HP X240 10G SFP+ SFP+ 1.2m DAC Cable
HP X240 10G SFP+ SFP+ 3m DAC Cable
HP X240 10G SFP+ SFP+ 5m DAC Cable
JD094B
JG234A
JD095C#B01
JD096C#B01
JD097C#B01
JG081C#B01
SFP Transceivers
HP X110 100M SFP LC LH40 Transceiver
HP X110 100M SFP LC LH80 Transceiver
HP X115 100M SFP LC FX Transceiver
HP X110 100M SFP LC LX Transceiver
HP X110 100M SFP LC BX 10-U Transceiver
HP X110 100M SFP LC BX 10-D Transceiver
HP X120 1G SFP LC LH40 1550nm XCVR
HP X120 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X125 1G SFP LC LH40 1310nm XCVR
HP X125 1G SFP LC LH70 Transceiver
JD090A
JD091A
JD102B
JD120B
JD100A
JD101A
JD062A
JD089B
JD118B
JD119B
JD061A
JD063B
Internal Power Supplies
(JC103x and JG256x Only) System (std 0 // max 2) User Selection (min 1 // max 2) per switch
(JC101x and JG242x Only) System (std 0 // max 2) User Selection (min 1 // max 2) per switch
(JG225A only) System (std 0 // max 2) User Selection (min 1 // max 2) per switch
HP 5500 150WAC Power Supply
JD362A
See Configuration
Note:1, 2, 3
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JD362A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JD362A#B2C
HP 5500 150WDC Power Supply
JD366A
See Configuration
Note:1, 3
HP 5800 300W AC Power Supply
JC087A
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 20
QuickSpecs
HP 5800 Switch Series
Configuration
See Configuration
Note:1, 2, 4
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JC087A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JC087A#B2C
HP 5800 300W DC Power Supply
JC090A
See Configuration
Note:1, 4
HP 5800 750W AC PoE Power Supply
JC089A
See Configuration
Note:1, 2, 4
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JC089A#B2B
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
JC089A#B2C
HP A58x0AF 650W AC Power Supply
includes 1 x c13, 650w
JC680A
See Configuration
Note:1, 2, 6
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
JC680A#B2B
JC680A#B2C
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
HP 58x0AF 650W DC Power Supply
JC681A
See Configuration
Note:1, 6
Configuration Rules:
Note 1
If 2 power supplies are selected then they must be the same Sku number.
Note 2
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See Localization
Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power
Cable option on the Switches/Routers.
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 21
QuickSpecs
HP 5800 Switch Series
Configuration
Note 3
This power supply only supported on JC103x and JG256x Only.
Note 4
This power supply only supported on JC101x and JG242x Only.
Note 6
This power supply only supported on JG225A Only.
Remarks:
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or
#B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level
CTO)
Switch Options
Fan Trays
(JG225A only) System (std 0 // max 2) User Selection (min 2 // max 2) per switch
HP 58x0AF Bck(pwr)-Frt(ports) Fan Tray
JC682A
See Configuration
Note:1
HP 58x0AF Frt(ports)-Bck(pwr) Fan Tray
JC683A
See Configuration
Note:1
Configuration Rules:
Note 1
Fan Trays cannot be mixed in the same switch enclosure
Remark:
Watson Blue Text:
If there is any empty space below the switch in a rack when using Back to Front Fan Trays, JC682A, the rack
will receive an Air Plenum kit that takes up 1U of additional space in the rack. The Air Plenum kit is not
required on fully configured racks. This only applies for CTO Rack Level Integration. The Air Plenum Kit is a
non-saleable SKU, and is brought in automatically for CTO Factory Rack Level Integration.
Fan Options
HP 5800 2RU Spare Fan Assembly
JC096A
See Configuration
Note:1
HP 5800 1RU Spare Fan Assembly
JC098A
See Configuration
Note:2
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 22
QuickSpecs
HP 5800 Switch Series
Configuration
Configuration Rules:
Note 1
This Spare Fan is only supported on switches JC101A and JG242A.
Note 2
This Spare Fan is only supported on switches JC099A, JC100A, JC103A, JC104A, JC105A, JG254A, JG255A,
JG256A, JG257A and JG258A.
Opacity Shield Kit
System (std 0 // max 1) User Selection (min 0 // max 1)
HP 5800-24G / -48G PoE Opcty Shld Kit
Supported on JG254A, JG257A
JG560A
HP 58xx 2-slot Switch Opcty Shld Kit
Supported on JG242A
JG561A
HP 5800-24G-SFP Opcty Shld Kit
Supported on JG256A
JG562A
HP 5800-24G / -48G Opcty Shld Kit
Supported on JG255A, JG258A
JG563A
Tamper Evidence Labels
HP 12mm x 60mm Tmpr-Evidence (30) Lbl
Supported on JG560A, JG561A, JG562A or JG563A
Remarks
JG585A
Each JG560A, JG561A, JG562A or JG563A would use 1 of JG585A.
License
HP WX5000 32 AP License Upgrade
JD463A
See Configuration
Note:1
Configuration Rules:
Note 1
If this license is selected, Then one of these modules should be selected or be on site:
JD443A - HP A5800 Access Controller Module for 32-64 Aps
JD441A - HP A5800 Access Controller Module for 64-256 Aps
External Redundant Power Supplies
HP RPS 800 Redundant Power Supply
JD183A
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 23
QuickSpecs
HP 5800 Switch Series
Configuration
Height = 1U
includes 1 x c13
See Configuration
Note:2, 4
HP RPS1600 Redundant Power System
Height = 1U
includes 1 x c13, 1600w and Power Supply port
JG136A
See Configuration
Note:2, 3, 5
HP RPS1600 1600W AC Power Supply
Installs into JG136A only
JG137A
See Configuration
Note:1, 3
Configuration Rules:
Note 1
If this power supply is selected, The JG136A - HP A-RPS1600 Redundant Power System must be on order or
onsite.
Note 2
Localization required.
Note 3
Each switch will only support 1 JG136A and 1 JG137A Power supply systems.
Note 4
This power supply only supported on switches JC105A and JC100A.
Note 5
This power supply only supported on switches JC099A, JC101A, JC103A, JC104A.
Options for the HP RPS 800 and 1600 External RPS Power Supplies
HP X290 1000 A JD5 2m RPS Cable
JD187A
See Configuration
Note:3
HP X290 1000 A JD5 Non-PoE 2m RPS Cable
JD188A
See Configuration
Note:2
HP X290 1000 B JD5 2m RPS Cable
JD189A
See Configuration
Note:4
HP X290 500/800 1m RPS Cable
JD190A
See Configuration
Note:1
Configuration Rules:
Note 1
This Cable is only supported on switches JC105A and JC100A when used with the RPS 800 (JD183A)
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 24
QuickSpecs
HP 5800 Switch Series
Configuration
Note 2
This Cable is only supported on switch JC103A when used with the RPS 1600 (JG136A)
Note 3
This Cable is only supported on switches JC099A, JC101A, JC104A, and when used with the RPS 1600
(JG136A).
Note 4
This Cable is only supported on switches JC101A (Runing On Non-PoE mode), JC103A when used with the
RPS 1600 (JG136A)
Remarks:
These cables are used to connect the External Power System to Switch.
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 25
QuickSpecs
HP 5800 Switch Series
Technical Specifications
HP 5800-24G-PoE+ Switch (JC099A)
Ports
Physical characteristics
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE
802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
1 extended module slot
4 fixed 1000/10000 SFP+ ports
1 RJ-45 serial console port
Dimensions
17.3(w) x 16.8(d) x 1.71(h) in (43.94 x 42.67 x 4.34 cm) (1U height)
Weight
17.64 lb (8 kg)
Memory and processor
1024 MB SDRAM, 512 MB flash; packet buffer size: 4 MB
Performance
Latency
4.02 µs (Store and Forward) (64-byte packets)
Throughput
155 million pps
Routing/Switching
capacity
208 Gbps
Routing table size
16000 entries
MAC address table size
32000 entries
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 90%
Acoustic
Low-speed fan: 47.5 dB, High-speed fan: 52.4 dB
Environment
Electrical characteristics Maximum heat
dissipation
Safety
Emissions
Immunity
2968 BTU/hr (3131.24 kJ/hr)
Voltage
100-120/200-240 VAC
Frequency
50/60 Hz
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance
VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR22 Class A; EN 61000-32:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
Generic
ETSI EN 300 386 V1.3.3
EN
EN 55024:1998+ A1:2001 + A2:2003
ESD
EN 61000-4-2; IEC 61000-4-2
Radiated
EN 61000-4-3; IEC 61000-4-3
EFT/Burst
EN 61000-4-4; IEC 61000-4-4
Surge
EN 61000-4-5; IEC 61000-4-5
Conducted
EN 61000-4-6; IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8; EN 61000-4-8
Voltage dips and
interruptions
EN 61000-4-11; IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 26
QuickSpecs
HP 5800 Switch Series
Technical Specifications
Flicker
Management
Services
EN 61000-3-3, IEC 61000-3-3
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet;
HTTPS; RMON1; FTP
3-year, 4-hour onsite, 13x5 coverage for hardware (UV882E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV885E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV888E)
3-year, 24x7 SW phone support, software updates (UV891E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR565E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR566E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV883E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV886E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV889E)
4-year, 24x7 SW phone support, software updates (UV892E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV884E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV887E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV890E)
5-year, 24x7 SW phone support, software updates (UV893E)
3 Yr 6 hr Call-to-Repair Onsite (UW969E)
4 Yr 6 hr Call-to-Repair Onsite (UW970E)
5 Yr 6 hr Call-to-Repair Onsite (UW971E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR568E)
1-year, 24x7 software phone support, software updates (HR567E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS650E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS651E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS652E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS653E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS654E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS655E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS656E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS657E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 5800-24G Switch (JC100A)
Ports
Physical characteristics
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE
802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
1 extended module slot
4 fixed 1000/10000 SFP+ ports
1 RJ-45 serial console port
Dimensions
17.32(w) x 14.35(d) x 1.72(h) in (44.0 x 36.45 x 4.36 cm) (1U height)
Weight
13.23 lb (6 kg)
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 27
QuickSpecs
HP 5800 Switch Series
Technical Specifications
Memory and processor
1024 MB SDRAM, 512 MB flash; packet buffer size: 4 MB
Performance
Latency
4.02 µs (Store and Forward) (64-byte packets)
Throughput
155 million pps
Routing/Switching
capacity
208 Gbps
Routing table size
16000 entries
MAC address table size
32000 entries
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 90%
Acoustic
Low-speed fan: 42.3 dB, High-speed fan: 52.9 dB
Environment
Electrical characteristics Maximum heat
dissipation
Safety
Emissions
Immunity
Management
Services
358 BTU/hr (377.69 kJ/hr)
Voltage
100-120-240 VAC
Frequency
50/60 Hz
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance
VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR22 Class A; EN 61000-32:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
Generic
ETSI EN 300 386 V1.3.3
EN
EN 55024:1998+ A1:2001 + A2:2003
ESD
EN 61000-4-2; IEC 61000-4-2
Radiated
EN 61000-4-3; IEC 61000-4-3
EFT/Burst
EN 61000-4-4; IEC 61000-4-4
Surge
EN 61000-4-5; IEC 61000-4-5
Conducted
EN 61000-4-6; IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8; EN 61000-4-8
Voltage dips and
interruptions
EN 61000-4-11; IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet;
HTTPS; RMON1; FTP
3-year, 4-hour onsite, 13x5 coverage for hardware (UV882E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV885E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV888E)
3-year, 24x7 SW phone support, software updates (UV891E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR565E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR566E)
Installation with minimum configuration, system-based pricing (UW451E)
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 28
QuickSpecs
HP 5800 Switch Series
Technical Specifications
4-year, 4-hour onsite, 13x5 coverage for hardware (UV883E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV886E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV889E)
4-year, 24x7 SW phone support, software updates (UV892E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV884E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV887E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV890E)
5-year, 24x7 SW phone support, software updates (UV893E)
3 Yr 6 hr Call-to-Repair Onsite (UW969E)
4 Yr 6 hr Call-to-Repair Onsite (UW970E)
5 Yr 6 hr Call-to-Repair Onsite (UW971E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR568E)
1-year, 24x7 software phone support, software updates (HR567E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS650E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS651E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS652E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS653E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS654E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS655E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS656E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS657E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 5800-24G-SFP Switch with 1 Interface Slot (JC103A)
Ports
Power supplies
Physical characteristics
24 SFP fixed Gigabit Ethernet SFP ports
1 extended module slot
4 fixed 1000/10000 SFP+ ports
1 RJ-45 serial console port
2 power supply slots
1 minimum power supplies required (ordered separately)
Dimensions
17.32(w) x 16.81(d) x 1.72(h) in (44.0 x 42.7 x 4.36 cm) (1U height)
Weight
18.74 lb (8.5 kg)
Memory and processor
1024 MB SDRAM, 512 MB flash; packet buffer size: 4 MB
Performance
Latency
4.02 µs (Store and Forward) (64-byte packets)
Throughput
155 million pps
Routing/Switching
capacity
208 Gbps
Routing table size
16000 entries
MAC address table size
32000 entries
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 29
QuickSpecs
HP 5800 Switch Series
Technical Specifications
Environment
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 90%
Acoustic
Low-speed fan: 49.6 dB, High-speed fan: 58.1 dB
Electrical characteristics Maximum heat
dissipation
Safety
Emissions
Immunity
Management
Notes
Services
498 BTU/hr (525.39 kJ/hr)
Voltage
100-120/200-240 VAC
DC voltage
–48 VDC to –60 VDC
Frequency
50/60 Hz
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance
VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR22 Class A; EN 61000-32:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
Generic
ETSI EN 300 386 V1.3.3
EN
EN 55024:1998+ A1:2001 + A2:2003
ESD
EN 61000-4-2; IEC 61000-4-2
Radiated
EN 61000-4-3; IEC 61000-4-3
EFT/Burst
EN 61000-4-4; IEC 61000-4-4
Surge
EN 61000-4-5; IEC 61000-4-5
Conducted
EN 61000-4-6; IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8; EN 61000-4-8
Voltage dips and
interruptions
EN 61000-4-11; IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet;
HTTPS; RMON1; FTP
Customer must order a power supply, as the device does not come with a PSU. At least one JD362A or
JD366A is required.
3-year, 4-hour onsite, 13x5 coverage for hardware (UV882E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV885E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV888E)
3-year, 24x7 SW phone support, software updates (UV891E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR565E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR566E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV883E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV886E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV889E)
4-year, 24x7 SW phone support, software updates (UV892E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV884E)
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 30
QuickSpecs
HP 5800 Switch Series
Technical Specifications
5-year, 4-hour onsite, 24x7 coverage for hardware (UV887E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV890E)
5-year, 24x7 SW phone support, software updates (UV893E)
3 Yr 6 hr Call-to-Repair Onsite (UW969E)
4 Yr 6 hr Call-to-Repair Onsite (UW970E)
5 Yr 6 hr Call-to-Repair Onsite (UW971E)
1-year, 24x7 software phone support, software updates (HR567E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS650E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS651E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS652E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS653E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS654E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS655E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS656E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS657E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 5800-48G-PoE+ Switch with 1 Interface Slot (JC104A)
Ports
Physical characteristics
48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE
802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
1 extended module slot
4 fixed 1000/10000 SFP+ ports
1 RJ-45 serial console port
Dimensions
17.32(w) x 16.81(d) x 1.72(h) in (44.0 x 42.7 x 4.36 cm) (1U height)
Weight
18.74 lb (8.5 kg)
Memory and processor
1024 MB SDRAM, 512 MB flash; packet buffer size: 8 MB
Performance
Latency
4.02 µs (Store and Forward) (64-byte packets)
Throughput
190 million pps
Routing/Switching
capacity
256 Gbps
Routing table size
16000 entries
MAC address table size
32000 entries
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 90%
Acoustic
Low-speed fan: 50.5 dB, High-speed fan: 57.9 dB
Environment
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 31
QuickSpecs
HP 5800 Switch Series
Technical Specifications
Electrical characteristics Maximum heat
dissipation
Safety
Emissions
Immunity
Management
Services
3320 BTU/hr (3502.6 kJ/hr)
Voltage
100-120/200-240 VAC
Frequency
50/60 Hz
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance
VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR22 Class A; EN 61000-32:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
Generic
ETSI EN 300 386 V1.3.3
EN
EN 55024:1998+ A1:2001 + A2:2003
ESD
EN 61000-4-2; IEC 61000-4-2
Radiated
EN 61000-4-3; IEC 61000-4-3
EFT/Burst
EN 61000-4-4; IEC 61000-4-4
Surge
EN 61000-4-5; IEC 61000-4-5
Conducted
EN 61000-4-6; IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8; EN 61000-4-8
Voltage dips and
interruptions
EN 61000-4-11; IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP
Manager; Telnet; HTTPS; RMON1; FTP
3-year, 4-hour onsite, 13x5 coverage for hardware (HQ063E)
3-year, 4-hour onsite, 24x7 coverage for hardware (HQ064E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (HQ067E)
3-year, 24x7 SW phone support, software updates (HQ066E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR569E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR570E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (HQ068E)
4-year, 4-hour onsite, 24x7 coverage for hardware (HQ069E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (HQ076E)
4-year, 24x7 SW phone support, software updates (HQ074E)
5-year, 4-hour onsite, 13x5 coverage for hardware (HQ071E)
5-year, 4-hour onsite, 24x7 coverage for hardware (HQ072E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (HQ077E)
5-year, 24x7 SW phone support, software updates (HQ075E)
3 Yr 6 hr Call-to-Repair Onsite (HQ065E)
4 Yr 6 hr Call-to-Repair Onsite (HQ070E)
5 Yr 6 hr Call-to-Repair Onsite (HQ073E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR573E)
1-year, 24x7 software phone support, software updates (HR572E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates
(HR571E)
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 32
QuickSpecs
HP 5800 Switch Series
Technical Specifications
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS666E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS667E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 5800-48G Switch with 1 Interface Slot (JC105A)
Ports
Physical characteristics
48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE
802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
1 extended module slot
4 fixed 1000/10000 SFP+ ports
1 RJ-45 serial console port
Dimensions
17.32(w) x 14.45(d) x 1.72(h) in (44.0 x 36.7 x 4.36 cm) (1U height)
Weight
14.33 lb (6.5 kg)
Memory and processor
1024 MB SDRAM, 512 MB flash; packet buffer size: 8 MB
Performance
Latency
4.02 µs (Store and Forward) (64-byte packets)
Throughput
190 million pps
Routing/Switching
capacity
256 Gbps
Routing table size
16000 entries
MAC address table size
32000 entries
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 90%
Acoustic
Low-speed fan: 45.3 dB, High-speed fan: 56.5 dB
Environment
Electrical characteristics Maximum heat
dissipation
Safety
Emissions
Immunity
557 BTU/hr (587.64 kJ/hr)
Voltage
100-120/200-240 VAC
Frequency
50/60 Hz
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance
VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR22 Class A; EN 61000-32:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
Generic
ETSI EN 300 386 V1.3.3
EN
EN 55024:1998+ A1:2001 + A2:2003
ESD
EN 61000-4-2; IEC 61000-4-2
Radiated
EN 61000-4-3; IEC 61000-4-3
EFT/Burst
EN 61000-4-4; IEC 61000-4-4
Surge
EN 61000-4-5; IEC 61000-4-5
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 33
QuickSpecs
HP 5800 Switch Series
Technical Specifications
Management
Services
Conducted
EN 61000-4-6; IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8; EN 61000-4-8
Voltage dips and
interruptions
EN 61000-4-11; IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet;
HTTPS; RMON1; FTP
3-year, 4-hour onsite, 13x5 coverage for hardware (HQ063E)
3-year, 4-hour onsite, 24x7 coverage for hardware (HQ064E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (HQ067E)
3-year, 24x7 SW phone support, software updates (HQ066E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR569E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR570E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (HQ068E)
4-year, 4-hour onsite, 24x7 coverage for hardware (HQ069E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (HQ076E)
4-year, 24x7 SW phone support, software updates (HQ074E)
5-year, 4-hour onsite, 13x5 coverage for hardware (HQ071E)
5-year, 4-hour onsite, 24x7 coverage for hardware (HQ072E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (HQ077E)
5-year, 24x7 SW phone support, software updates (HQ075E)
3 Yr 6 hr Call-to-Repair Onsite (HQ065E)
4 Yr 6 hr Call-to-Repair Onsite (HQ070E)
5 Yr 6 hr Call-to-Repair Onsite (HQ073E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR573E)
1-year, 24x7 software phone support, software updates (HR572E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates
(HR571E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS666E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS667E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 5800-48G Switch with 2 Slots (JC101A)
Ports
48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE
802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
2 extended module slots
1 open module slot
4 SFP fixed Gigabit Ethernet SFP ports
1 RJ-45 serial console port
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 34
QuickSpecs
HP 5800 Switch Series
Technical Specifications
Power supplies
Physical characteristics
2 power supply slots
1 minimum power supplies required (ordered separately)
Dimensions
17.32(w) x 18.31(d) x 3.39(h) in (44.0 x 46.5 x 8.61 cm) (2U height)
Weight
39.7 lb (18.0 kg)
Memory and processor
1024 MB SDRAM, 512 MB flash; packet buffer size: 8 MB
Performance
Latency
4.02 µs (Store and Forward) (64-byte packets)
Throughput
211 million pps
Routing/Switching
capacity
284 Gbps
Routing table size
16000 entries
MAC address table size
32000 entries
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 90%
Acoustic
Low-speed fan: 54 dB, High-speed fan: 58.5 dB
Environment
Electrical characteristics Maximum heat
dissipation
Safety
Emissions
Immunity
Management
6278 BTU/hr (6623.29 kJ/hr)
Voltage
100-120/200-240 VAC
DC Voltage
300 W DC: –48 VDC to –60 VDC; 750 W DC: –54 VDC to –57 VDC
Frequency
50/60 Hz
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance
VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR22 Class A; EN 61000-32:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
Generic
ETSI EN 300 386 V1.3.3
EN
EN 55024:1998+ A1:2001 + A2:2003
ESD
EN 61000-4-2; IEC 61000-4-2
Radiated
EN 61000-4-3; IEC 61000-4-3
EFT/Burst
EN 61000-4-4; IEC 61000-4-4
Surge
EN 61000-4-5; IEC 61000-4-5
Conducted
EN 61000-4-6; IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8; EN 61000-4-8
Voltage dips and
interruptions
EN 61000-4-11; IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet;
HTTPS; RMON1; FTP
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 35
QuickSpecs
HP 5800 Switch Series
Technical Specifications
Notes
Services
Customer must order power supply, as the device does not come with a PSU. At least one
JC087A/JC090A/JC089A is required.
3-year, 4-hour onsite, 13x5 coverage for hardware (HQ063E)
3-year, 4-hour onsite, 24x7 coverage for hardware (HQ064E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (HQ067E)
3-year, 24x7 SW phone support, software updates (HQ066E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR569E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR570E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (HQ068E)
4-year, 4-hour onsite, 24x7 coverage for hardware (HQ069E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (HQ076E)
4-year, 24x7 SW phone support, software updates (HQ074E)
5-year, 4-hour onsite, 13x5 coverage for hardware (HQ071E)
5-year, 4-hour onsite, 24x7 coverage for hardware (HQ072E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (HQ077E)
5-year, 24x7 SW phone support, software updates (HQ075E)
3 Yr 6 hr Call-to-Repair Onsite (HQ065E)
4 Yr 6 hr Call-to-Repair Onsite (HQ070E)
5 Yr 6 hr Call-to-Repair Onsite (HQ073E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR573E)
1-year, 24x7 software phone support, software updates (HR572E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates
(HR571E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS666E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS667E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 5800AF-48G Switch (JG225A)
Ports
Power supplies
Fan tray
48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE
802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
6 fixed 1000/10000 SFP+ ports
1 RJ-45 serial console port
1 RJ-45 out-of-band management port
1 USB 2.0
2 power supply slots
1 minimum power supply required (ordered separately)
2 fan tray slots
The customer must order fan trays, as fan trays are not included with the switch. This system requires two
same-direction airflow fan trays to function properly. The system should not be operated with only one
fan tray for more than 24 hours. The system should not be operated without a fan tray more than two
minutes. The system should not be operated outside of the temperature range of 32°F (0°C) to 113°F
(45°C). Failure to comply with these operating requirements may void the product warranty.
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 36
QuickSpecs
HP 5800 Switch Series
Technical Specifications
Physical characteristics
Dimensions
17.32(w) x 25.98(d) x 1.72(h) in (43.99 x 65.99 x 4.37 cm) (1U height)
Weight
22.05 lb (10 kg), Fully loaded
Memory and processor
1024 MB flash, 512 MB SDRAM; packet buffer size: 8 MB
Performance
Latency
< 5 µs (64-byte packets)
Throughput
161 million pps
Routing/Switching
capacity
216 Gbps
Routing table size
16000 entries
MAC address table size
32000 entries
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 90%
Acoustic
Low-speed fan: 60.1 dB, High-speed fan: 69.9 dB
Environment
Electrical characteristics Maximum heat
dissipation
Safety
Emissions
Immunity
Management
Notes
426 BTU/hr (449.43 kJ/hr)
Voltage
100-120/200-240 VAC
DC Voltage
650W DC: -36 VDC to -72 VDC
Frequency
50/60 Hz
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance
VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR22 Class A; EN 61000-32:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
Generic
ETSI EN 300 386 V1.3.3
EN
EN 55024:1998+ A1:2001 + A2:2003
ESD
EN 61000-4-2; IEC 61000-4-2
Radiated
EN 61000-4-3; IEC 61000-4-3
EFT/Burst
EN 61000-4-4; IEC 61000-4-4
Surge
EN 61000-4-5; IEC 61000-4-5
Conducted
EN 61000-4-6; IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8; EN 61000-4-8
Voltage dips and
interruptions
EN 61000-4-11; IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet;
HTTPS; RMON1; FTP
The customer must order a power supply, as the device does not come with a PSU. At least one JC680A or
JC681A is required.
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 37
QuickSpecs
HP 5800 Switch Series
Technical Specifications
Services
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
Standards and protocols
(applies to all products in
series)
General protocols
IEEE 802.1ag Service Layer OAM
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s (MSTP)
IEEE 802.1v VLAN classification by Protocol and
Port
IEEE 802.1w Rapid Reconfiguration of Spanning
Tree
IEEE 802.1X PAE
IEEE 802.3ad Link Aggregation Control Protocol
(LACP)
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 925 Multi-LAN Address Resolution
RFC 951 BOOTP
RFC 1058 RIPv1
RFC 1350 TFTP Protocol (revision 2)
RFC 1519 CIDR
RFC 1542 BOOTP Extensions
RFC 1812 IPv4 Routing
RFC 2131 DHCP
RFC 2236 IGMP Snooping
RFC 2370 OSPF Opaque LSA Option
RFC 2385 TCP MD5 Authentication for BGPv4
RFC 2453 RIPv2
RFC 2475 Architecture for Differentiated Services
RFC 2597 Assured Forwarding PHB Group
RFC 3046 DHCP Relay Agent Information Option
RFC 3209 RSVP-TE Extensions to RSVP for LSP
Tunnels
RFC 3576 Ext to RADIUS (CoA only)
RFC 3584 Coexistence between Version 1 and
Version 2 of the Internet-standard Network
Management Framework
RFC 3623 Graceful OSPF Restart
RFC 3768 VRRP
RFC 4090 Fast Reroute Extensions to RSVP-TE for
LSP Tunnels
RFC 4022 MIB for TCP
RFC 4251 SSHv6 Architecture
RFC 4252 SSHv6 Authentication
RFC 4253 SSHv6 Transport Layer
RFC 4254 SSHv6 Connection
RFC 4293 MIB for IP
RFC 4419 Key Exchange for SSH
RFC 4443 ICMPv6
RFC 4541 IGMP & MLD Snooping Switch
RFC 4861 IPv6 Neighbor Discovery
RFC 4862 IPv6 Stateless Address Auto-configuration
MIBs
IEEE 8021-PAE-MIB
IEEE 8023-LAG-MIB
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1657 BGP-4 MIB
RFC 1724 RIPv2 MIB
RFC 1850 OSPFv2 MIB
RFC 2011 SNMPv2 MIB for IP
RFC 2013 SNMPv2 MIB for UDP
RFC 2233 Interface MIB
RFC 2273 SNMP-NOTIFICATION-MIB
RFC 2452 IPV6-TCP-MIB
RFC 2454 IPV6-UDP-MIB
RFC 2465 IPv6 MIB
RFC 2466 ICMPv6 MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2688 MAU-MIB
RFC 2787 VRRP MIB
RFC 2819 RMON MIB
RFC 2925 Ping MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
RFC 3621 Power Ethernet MIB
RFC 3826 AES for SNMP's USM MIB
RFC 4133 Entity MIB (Version 3)
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 38
QuickSpecs
HP 5800 Switch Series
Technical Specifications
RFC 4291 IP Version 6 Addressing Architecture
RFC 4675 RADIUS VLAN & Priority
RFC 4762 Virtual Private LAN Service (VPLS) Using
Label Distribution Protocol (LDP) Signaling
IP multicast
RFC 2934 Protocol Independent Multicast MIB for
IPv4
RFC 3376 IGMPv3 (host joins only)
RFC 3618 Multicast Source Discovery Protocol
(MSDP)
RFC 3973 Draft 2 PIM Dense Mode
RFC 4601 PIM Sparse Mode
IPv6
RFC 2080 RIPng for IPv6
RFC 2460 IPv6 Specification
RFC 2710 Multicast Listener Discovery (MLD) for
IPv6
RFC 2740 OSPFv3 for IPv6
RFC 2925 Remote Operations MIB (Ping only)
RFC 3019 MLDv1 MIB
RFC 3162 RADIUS and IPv6
RFC 3315 DHCPv6 (client and relay)
RFC 3315 DHCPv6 (client only)
RFC 3810 MLDv2 (host joins only)
LLDP-MIB
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
RFC 2819 Four groups of RMON: 1 (statistics), 2
(history), 3 (alarm) and 9 (events)
RFC 3176 sFlow
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
SNMPv1/v2c/v3
OSPF
RFC 2328 OSPFv2
RFC 3101 OSPF NSSA
Security
IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
RFC 2865 RADIUS (client only)
RFC 2866 RADIUS Accounting
Access Control Lists (ACLs)
Secure Sockets Layer (SSL)
SSHv2 Secure Shell
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 39
QuickSpecs
HP 5800 Switch Series
Accessories
HP 5800 Switch Series
accessories
Modules
HP 5800 4-port 10GbE SFP+ Module
HP 5800 2-port 10GbE SFP+ Module
HP 5800 16-port Gig-T Module
HP 5800 16-port GbE SFP Module
Transceivers
HP X124 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X110 100M SFP LC LH40 Transceiver
HP X110 100M SFP LC LH80 Transceiver
HP X115 100M SFP LC BX 10-U Transceiver
HP X115 100M SFP LC BX 10-D Transceiver
HP X110 100M SFP LC FX Transceiver
HP X110 100M SFP LC LX Transceiver
HP X130 SFP+ LC SR Transceiver
HP X130 SFP+ LC LRM Transceiver
HP X130 SFP+ LC LR Transceiver
HP X130 10G SFP+ LC ER 40km Transceiver
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
Cables
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
Power Supply
HP 5800/5500 150W AC Power Supply
HP 5800/5500 150W DC Power Supply
HP 5800 300W AC Power Supply
HP 5800 300W DC Power Supply
HP 5800 750W AC PoE Power Supply
HP RPS 800 Redundant Power Supply
HP RPS1600 Redundant Power System
DA - 13807 Worldwide — Version 27 — June 10, 2014
JC091A
JC092B
JC094A
JC095A
JD061A
JD062A
JD063B
JD118B
JD119B
JD089B
JD098B
JD099B
JD090A
JD091A
JD100A
JD101A
JD102B
JD120B
JD092B
JD093B
JD094B
JG234A
JD095C
JD096C
JD097C
JG081C
JC784C
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
JD362A
JD366A
JC087A
JC090A
JC089A
JD183A
JG136A
Page 40
QuickSpecs
HP 5800 Switch Series
Accessories
HP RPS1600 1600W AC Power Supply
EPS/RPS
HP 5800 PoE Module
Fan Tray
HP 5800 2RU Spare Fan Assembly
HP 5800 1RU Spare Fan Assembly
Appliance
HP 5820 VPN Firewall Module
HP 5800-48G Switch with 2 Slots (JC101A)
HP 5820 VPN Firewall Module
HP 5800AF-48G Switch (JG225A)
HP 58x0AF 650W AC Power Supply
HP 58x0AF 650W DC Power Supply
HP 58x0AF Back (power side) to Front (port side) Airflow Fan Tray
HP 58x0AF Front (port side) to Back (power side) Airflow Fan Tray
DA - 13807 Worldwide — Version 27 — June 10, 2014
JG137A
JC097B
JC096A
JC098A
JD255A
JD255A
JC680A
JC681A
JC682A
JC683A
Page 41
QuickSpecs
HP 5800 Switch Series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP X125 1G SFP LC LH40
1310nm Transceiver
(JD061A)
Ports
Connectivity
1 LC 1000Base-LH port (no IEEE standard exists for 1550 nm optics)
Connector type
LC
Wavelength
1310 nm
Physical characteristics Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
A small form-factor
cm)
pluggable SFP Gigabit LH40
Full configuration weight 0.04 lb. (0.02 kg)
transceiver that provides a
full duplex Gigabit solution Electrical characteristics Power consumption typical 0.8 W
Power consumption
1.0 W
up to 40km on a singlemaximum
mode fiber.
Cabling
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
40km distance
Fiber type
Single Mode
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
HP X120 1G SFP LC LH40
1550nm Transceiver
(JD062A)
Ports
Connectivity
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Connector type
LC
Wavelength
1550 nm
Physical characteristics Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
A small form-factor
cm)
pluggable (SFP) Gigabit
Full configuration weight 0.04 lb. (0.02 kg)
LH40 transceiver that
Electrical characteristics Power consumption typical 0.8 W
provides a full-duplex
Power consumption
1.0 W
Gigabit solution up to 40
maximum
km on a single mode fiber.
Cabling
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
Services
40km distance
Fiber type
Single Mode
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 42
QuickSpecs
HP 5800 Switch Series
Accessory Product Details
HP X125 1G SFP LC LH70
Transceiver (JD063B)
A small form-factor
pluggable (SFP) Gigabit
LH70 transceiver that
provides a full-duplex
Gigabit solution up to
70km on a single-mode
fiber.
Ports
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Connectivity
Connector type
LC
Wavelength
1550 nm
Physical characteristics
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight 0.04 lb. (0.02 kg)
Electrical characteristics Power consumption
typical
0.8 W
Power consumption
maximum
1.0 W
Cabling
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
• 70km
Fiber type
Single Mode
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
HP X120 1G SFP LC SX
Transceiver (JD118B)
Dimensions
Ports
1 LC 1000BASE-SX port
Connectivity
Connector type
LC
Wavelength
850 nm
A small form-factor
pluggable (SFP) Gigabit SX Physical characteristics
transceiver that provides a
full-duplex Gigabit solution
up to 550m on a Multimode
Electrical characteristics
fiber.
Cabling
Services
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption
typical
0.8 W
Power consumption
maximum
1.0 W
Maximum distance:
• FDDI Grade distance = 220m
• OM1 = 275m
• OM2 = 500m
• OM3 = Not Specified by standard
Cable length
up to 550m
Fiber type
Multi Mode
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 43
QuickSpecs
HP 5800 Switch Series
Accessory Product Details
HP X120 1G SFP LC LX
Transceiver (JD119B)
Ports
1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
Connectivity
Connector type
LC
Wavelength
1300 nm
A small form-factor
pluggable (SFP) Gigabig LX Physical characteristics
transceiver that provides a
full duplex Gigabit solution
up to 550m on MMF or
Electrical characteristics
10Km on SMF
Cabling
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption
typical
0.8 W
Power consumption
maximum
1.0 W
Cable type:
Either single mode or multimode;
Maximum distance:
• 550m for Multimode
• 10km for Singlemode
Fiber type
Both
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
HP X125 1G SFP RJ45 T
Transceiver (JD089B)
Dimensions
Ports
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)
Connectivity
Connector type
Physical characteristics Dimensions
A small form factor
pluggable (SFP) Gigabit
Full configuration weight
1000Base-T transceiver
that provides a full duplex Electrical characteristics Power consumption
Gigabit solution up to
typical
100m on a Cat-5+ cable.
Power consumption
maximum
Cabling
Services
RJ-45
2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4
cm)
0.07 lb. (0.03 kg)
0.8 W
1.0 W
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced,
complying with IEEE 802.3ab 1000BASE-T;
Maximum distance:
• 100m
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 44
QuickSpecs
HP 5800 Switch Series
Accessory Product Details
HP X120 1G SFP LC BX 10- Ports
U Transceiver (JD098B)
Connectivity
A small form-factor
Physical characteristics
pluggable (SFP) Gigabit LXBX10-U transceiver that
provides a full duplex
Gigabit solution up to
Electrical characteristics
10km on a single mode
cable.
Cabling
Services
Services
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption
typical
0.8 W
Power consumption
maximum
1.0 W
Single Mode
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP X120 1G SFP LC BX 10- Ports
D Transceiver (JD099B)
Connectivity
A small form-factor
Physical characteristics
pluggable (SFP) Gigabit LXBX10-D transceiver that
provides a full duplex
Gigabit solution up to
Electrical characteristics
10km on a single mode
cable.
Notes
Dimensions
Maximum distance:
• 10km
Fiber type
TX 1310nm RX 1490nm
Notes
Cabling
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U); Duplex:
full only
Connector type
LC
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-D); Duplex:
full only
Connector type
LC
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption
typical
0.8 W
Power consumption
maximum
1.0 W
Maximum distance:
• Up to 10km
Fiber type
TX 1490nm RX 1310nm
Single Mode
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 45
QuickSpecs
HP 5800 Switch Series
Accessory Product Details
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
1m Cable (QK732A)
Notes
Services
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
2m Cable (QK733A)
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 46
QuickSpecs
HP 5800 Switch Series
Accessory Product Details
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
5m Cable (QK734A)
Notes
Services
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
15m Cable (QK735A)
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 47
QuickSpecs
HP 5800 Switch Series
Accessory Product Details
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
30m Cable (QK736A)
Notes
Services
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
50m Cable (QK737A)
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 48
QuickSpecs
HP 5800 Switch Series
Accessory Product Details
HP RPS1600 Redundant
Power System (JG136A)
Ports
Physical characteristics
8 redundant power supply ports
Restrictions: two -56V/25A DC(PoE); six -56V/8A DC(non-PoE)
Dimensions
15.63(d) x 17.32(w) x 1.74(h) in. (39.7 x 44 x 4.42
cm)
Weight
14.11 lb. (6.4 kg)
Full configuration weight 16.75 lb. (7.6 kg)
Environment
Operating temperature
14°F to 122°F (-10°C to 50°C)
Operating relative
humidity
5% to 95%
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%
Altitude
up to 13,123 ft. (4 km)
Acoustic
Pressure: 53 dB; ISO 7779, ISO 9296
Electrical characteristics Voltage
100-120/200-240 VAC
Current
30/60 A
Idle power
38 W
Maximum power rating
3550 W
RPS power
3200 W
PoE power
2800 W
RPS
-55 V
PoE
-55 V
Frequency
50/60 Hz
Notes
Safety
Services
Idle power is the actual power consumption of the
device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
With one RPS1600 Power Supply, the PRS1600
Redundant Power System can provide 1600W
power output; With two PRS1600 Power Supplies,
the output power is 3200W.
CE Labeled; UL 60950-1; IEC 60950-1; ICES-003; FCC Part 15, Subpart B; EU
RoHS Compliant; EN 60950-1/A11; C-Tick; VCCI Class A; ROHS Compliance; EN
300386
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 49
QuickSpecs
HP 5800 Switch Series
Accessory Product Details
HP RPS1600 1600W AC
Power Supply (JG137A)
Physical characteristics
Environment
Dimensions
Weight
8.19(d) x 4.96(w) x 1.63(h) in. (20.8 x 12.6 x 4.15
cm)
3.02 lb. (1.37 kg)
Operating temperature
14°F to 122°F (-10°C to 50°C)
Operating relative
humidity
5% to 95%
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%
Electrical characteristics Voltage
100-120/200-240 VAC
Current
15/30 A
Maximum power rating
1600 W
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Services
HP A5820 VPN Firewall Module (JD255A)
Ports
Physical characteristics
Environment
Management
Features
2 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T)
2 dual-personality ports; auto-sensing 10/100/1000Base-T or SFP
1 RJ-45 serial console port
1 Compact Flash port
Dimensions
9.84(d) x 9.84(w) x 14.45(h) in. (25 x 25 x 36.7 cm)
Weight
7.72 lb. (3.5 kg)
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 95%, noncondensing
IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet;
HTTPS; RMON1; FTP
Performance
- 6.5Gbps Firewall Throughput
- 1.8M Concurrent connection
- 50K New connection per second
- Max 20480 security policies
- 2Gbps 3DES/AES VPN Throughput
- 5000 IPSec tunnel
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 50
QuickSpecs
HP 5800 Switch Series
Accessory Product Details
- 4K VLAN
Firewall operation mode
- Routing mode
- Transparent mode
- Hybrid mode
AAA service
- Local Authentication
- Standard Radius
- HWTACACS+
- RADIUS domain Authentication
ASPF
- General TCP / UDP application
- FTP/SMTP/HTTP/RTSP/H323 Protocol State Detection
- SIP/MGCP/QQ/MSN Protocol State Detection
- Java/ActiveX Blocking and Detection
- Port mapping
- Support for the fragmented packets
Virtualization
- 256 Virtual Firewall
- 4 default Security Zone
- Max 256 Security Zone
NAT
- NAPT
- PAT
- NAT Server
- Port mapping
- Bidirectional NAT
- Static NAT
Network Security
- Add blacklist by hand or automatically
- IP+MAC Binding
- ARP Reverse Query
- ARP Cheat Check
- Management ports closed by default
DDOS
- DNS Query Flood
- SYN Flood
- Auto start TCP Proxy when Detect SYN Flood
- ICMP Flood
- UDP Flood
- IP Spoofing
- SQL injection filter
L2TP VPN
- LNS,LAC
- L2TP Multi-instance
GRE
- GRE tunneling protocol
IPSec
- AH/ESP
- ESP
- Transport/tunnel
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 51
QuickSpecs
HP 5800 Switch Series
Accessory Product Details
- NAT traversal
- Strategy template
IKE
- DH
- Pre-share Key authentication-method
- Support aggressive mode and main exchange mode
- IKE DPD, PKI / CA
Network Feature
- 802.1q VLAN
- 4K sub-interface
- Static and dynamic ARP
- Multicast, PIM
- IGMP v1/v2/v3
Routing
- RIP
- OSPF
- BGP
- Static Route
- policy Route
High Availability
- Active/Active mode
- Active/Passive mode
- Session Synchronization for Firewall
System management
- Web Management support IE/Firefox
- Command line interface (Console/Telnet/SSH)
- Classification Manager
- Unified management through iMC
- SNMPv1/v2c/v3
Administration
- Software Upgrades
- Configuration Backup and Restore
Logging/Monitoring
- Syslog
- Mini RMON
- NTP
- NAT/ASPF/firewall log stream(Binary log)
IPv6 Routing & Multicast
- RIPng
- OSPFv3
- BGP4+
- Static Route
- Policy Route
- PIM-SM/DM
IPv6 Security
- NAT-PT
- Manual tunnel
- IPV6 OVER ipv4 GRE tunnel
- 6to4 tunnel (RFC3056)
- ISATAP Tunnel
- IPv6 Packet Filter
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 52
QuickSpecs
HP 5800 Switch Series
Accessory Product Details
Services
- Radius
- NAT64
3-year, parts only, global next-day advance exchange (UZ914E)
3-year, 4-hour onsite, 13x5 coverage for hardware (UZ915 )
3-year, 4-hour onsite, 24x7 coverage for hardware (UZ918E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UZ922E)
3-year, 24x7 SW phone support, software updates (UZ925E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UZ916E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UZ919E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UZ923E)
4-year, 24x7 SW phone support, software updates (UZ926E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UZ917E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UZ920E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UZ924E)
5-year, 24x7 SW phone support, software updates (UZ927E)
3 Yr 6 hr Call-to-Repair Onsite (UZ928E)
4 Yr 6 hr Call-to-Repair Onsite (UZ929E)
5 Yr 6 hr Call-to-Repair Onsite (UZ930E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
Standards and protocols
IPv6
RFC 1981 IPv6 Path MTU Discovery
RFC 2460 IPv6 Specification
RFC 2465 Management Information Base for IP
Version 6: Textual Conventions and General
Group(partially support, only "IPv6 Interface
Statistics table")
RFC 3484 Default Address Selection for IPv6
RFC 3513 IPv6 Addressing Architecture
RFC 3587 IPv6 Global Unicast Address Format
RFC 4007 IPv6 Scoped Address Architecture
RFC 4862 IPv6 Stateless Address Auto-configuration
RFC 2405 The ESP DES-CBC Cipher Algorithm With
Explicit IV
RFC 2406 IP Encapsulating Security Payload (ESP)
RFC 2410 The NULL Encryption Algorithm and Its
Use With IPsec
RFC 2411 IP Security Document Roadmap
RFC 2451 The ESP CBC-Mode Cipher Algorithms
RFC 2473 Generic Packet Tunneling in IPv6
Specification
RFC 2529 Transmission of IPv6 over IPv4 Domains
without Explicit Tunnels
RFC 2661 Layer Two Tunneling Protocol "L2TP"
RFC 2784 Generic Routing Encapsulation (GRE)
RFC 2868 RADIUS Attributes for Tunnel Protocol
Security
Support
RFC 1321 The MD5 Message-Digest Algorithm
RFC 2893 Transition Mechanisms for IPv6 Hosts
RFC 1334 PPP Authentication Protocols (PAP)
RFC 1994 PPP Challenge Handshake Authentication and Routers
RFC 3602 The AES-CBC Cipher Algorithm and Its
Protocol (CHAP)
Use with IPsec
RFC 2104 Keyed-Hashing for Message
RFC 4214 Intra-Site Automatic Tunnel Addressing
Authentication
Protocol (ISATAP)
RFC 2138 RADIUS Authentication
RFC 2618 RADIUS Authentication Client MIB
IKEv1
RFC 2620 RADIUS Accounting Client MIB
RFC 2407 The Internet IP Security Domain of
RFC 2716 PPP EAP TLS Authentication Protocol
Interpretation for ISAKMP
RFC 2865 RADIUS Authentication
RFC 2408 Internet Security Association and Key
RFC 2866 RADIUS Accounting
Management Protocol (ISAKMP).
RFC 2867 RADIUS Accounting Modifications for
RFC 2409 The Internet Key Exchange (IKE)
Tunnel Protocol Support
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 53
QuickSpecs
HP 5800 Switch Series
Accessory Product Details
RFC 2868 RADIUS Attributes for Tunnel Protocol
Support
RFC 2869 RADIUS Extensions
draft-grant-tacacs-02 (TACACS)
VPN
RFC 1701 Generic Routing Encapsulation (GRE)
RFC 1702 Generic Routing Encapsulation over IPv4
networks.
RFC 1828 IP Authentication using Keyed MD5
RFC 1829 The ESP DES-CBC Transform
RFC 1853 IP in IP Tunneling
RFC 2085 HMAC-MD5 IP Authentication with
Replay Prevention
RFC 2401 Security Architecture for the Internet
Protocol
RFC 2402 IP Authentication Header
RFC 2403 The Use of HMAC-MD5-96 within ESP
and AH
RFC 2404 The Use of HMAC-SHA-1-96 within ESP
and AH
RFC 2412 The OAKLEY Key Determination Protocol
RFC 3526 More Modular Exponential (MODP)
Diffie-Hellman groups for Internet Key Exchange
(IKE)
RFC 3706 A Traffic-Based Method of Detecting
Dead Internet Key Exchange (IKE) Peers
PKI
RFC 2510 Internet X.509 Public Key Infrastructure
Certificate Management Protocols
RFC 2511 Internet X.509 Certificate Request
Message Format
RFC 3279 Algorithms and Identifiers for the Internet
X.509 Public Key Infrastructure Certificate and
Certificate Revocation List (CRL) Profile
RFC 3280 Internet X.509 Public Key Infrastructure
Certificate and Certificate Revocation List (CRL)
Profile
draft-nourse-scep-06:
PKCS#1
PKCS#10
PKCS#12
PKCS#7
To learn more, visit: www.hp.com/networking
© Copyright 2010-2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without
notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.
DA - 13807 Worldwide — Version 27 — June 10, 2014
Page 54
Open as PDF
Similar pages