RunFit
Fitness Tracker
Activity Band
JRV-SBD1500
USERS GUIDE
GETTING STARTED
Thank you for choosing the Jarv RunFit Fitness Tracker
Activity Band!
Please take the time to read this manual carefully, even if
you are already familiar with a similar product.
WHAT’S IN THIS DOCUMENT
This manual gets you started quickly getting your tracker on
your wrist then setting it up. Setup ensures that your tracker
can synchronize its data with the Purifit app, where you can
get detailed information on your stats, view historical data,
and much more. As soon as setup is complete, you’re ready
to start moving!
2
BOX CONTENTS:
• Jarv RunFit Fitness Tracker Activity Band
• Charging cable
• Users guide
3
PUTTING ON YOUR JARV RUNFIT
Your Jarv RunFit Activity Band has an adjustable wristband.
Attach your Jarv RunFit band to your wrist with the screen
facing up and the band wrapped around your wrist. Align the
sizing clip along the band to find the best and most optimal fit.
POWERING ON/OFF YOUR JARV RUN
FIT
To Power ON your Jarv Runfit Activity Band, press and hold the
touch sensor button* for 5-7 seconds until the screens display
turns on.
To Power OFF your Jarv Runfit Activity Band, press and hold the
touch sensor button* for 4-5 seconds until the screen displays
the off button- Short press to select the power off mode.
Your activity band goes into sleep mode by default when not in
use- it is reactivated by a short press of the touch sensor
button or by your wrist movement if applicable.
4
*If no action occurs when pressing down the touch sensor
button try moving your finger to a slightly different position to
activate the touch sensor.
CHARGING YOUR JARV RUNFIT
Your Jarv RunFit Activity Band comes with a built-in
rechargeable battery and a Micro USB charging cable. Charge
fully before use. Insert the USB cable into the USB port on the
back of the tracker and plug the other end of the USB
connector to either a PC or power adaptor to start charging.
Initial charging time is approximately 1.5 hours.
5
SETTING UP YOUR JARV RUN FIT
1-Download and Install the Purifit App
Please download the Purifit app from
the Google Play or Apple App Store and
have it installed on your smartphone
Supported Devices are Android 4.4 or
above and iOS 8.0 or above devices
Make sure your Jarv RunFit Activity Band is compatible with
your mobile device BEFORE installing the App. Note that you
will need an account with the applicable store before you
can download the App.
6
2-Set-Up your Jarv RunFit Activity band
Please make sure that your Jarv RunFit Activity Band is
fully charged and powered on before setting up the App
for the first time. To Power on, press and hold the touch
sensor button for 5-7 seconds until the screen display turns
on.
Once the app is installed, open it to get started. You will be
guided through the process of creating an account and
connecting (pairing) your Jarv RunFit Activity Band to your
mobile device. Pairing ensures that the tracker and mobile
device can communicate with one another (sync their
data).The personal information you are asked during setup is
used to calculate your basal metabolic rate (BMR), which
helps determine your estimated calorie expenditure.
7
CREATING AN ACCOUNT
Register and login to your account by first creating an account
by selecting Register Now and entering an email address
and password.
Proceed to enter all your personal information
The App will be used to check your stats anywhere or anytime
8
PAIRING YOUR DEVICE
On the home page, click the blue outlined area to pair/bind the
activity band. Select “RunFit” from the list of available
devices to complete the connection.
9
HOME PAGE
Home Page Features:
Select the Statistics Interface
to see a history of your activity
Select the Settings Interface
to set-up your settings and
preferences
Select the Exercise Mode to
begin training/running
Select Real-Time Activity
Data to track your daily data
such as steps taken, distance
traveled and calories burned.
Swipe to the left for Sleep Data
information which tracks your
sleep pattern and sleep quality.
Pull down on this section to
refresh data/ sync data
View daily stats data
10
STATISTICS INTERFACE
Analyses and tracks your daily data, including the steps
taken and calories burned.
You can also share your data with other via text and social
media.
11
SETTINGS INTERFACE
Allows you to set up your settings and preferences. In the “More”
page, you will able to modify your personal information, set-up
your alarm, select your metric preferences, select your language,
sharing preferences, health set-up preferences, and more.
In the “Setting” page of your activity band (you need to click on
“RunFit”) you will be able to set-up your reminders
12
EXERCISE MODE
In Exercise mode, Select “Go” to start your training program.
Click “History Record” to see your past exercise data. You can
switch in between the Map and Regular Mode for location
tracking purposes.
13
REAL TIME ACTIVITY DATA
Tracks your daily data, including the steps taken, distance
traveled and calories burned.
You can enter Exercise mode from this screen
Swipe down to refresh data/ sync data
14
SLEEP DATA
Tracks your sleep pattern and quality of sleep
Swipe down to refresh data/ sync data
*This model will not display the average heart rate
15
USING YOUR JARV RUNFIT ACTIVITY
BAND
1-Switching Between Different Function Modes
Short Press the button on the Jarv RunFit Activity Band to
switch in between modes
2-Change Display Information
Information shown on the screen will vary as you press the
button on the fitness band to toggle between screens
3-Jarv RunFit Mode Functions
Real Time Activity Mode: Analyses your daily data, including the
steps taken and calories burned
Sleep Mode: Tracks your sleep pattern and quality
Exercise Mode: Starts a workout and displays information including
duration, steps taken, calories burned and distance traveled during
the workout
Control Music Mode: Allows you to control music playback from
your activity band. Short press the touch sensor button to select
Music Mode, a 3 second countdown will be displayed on the screen
and the mode will be entered. Music playback functions can be
selected by short pressing the touch sensor and then press and hold
16
when the correct function is highlighted.
This function works when your default music player of your phone has
songs and the app is open. On some devices the default music player
might need to be turned on first.
4- Icon Description
Bluetooth Connection
Battery Status
Displays time
Steps Taken
Distance Traveled
Calories Burned
Music Mode
Find my Phone
17
FEATURES OF THE JARV RUNFIT
ACTIVITY BAND
Find My Phone
This function allows you to sound an alarm to detect you
phones location. This function is used directly from your
activity band- Short press the touch sensor button on your
band to select this mode. A 3 second countdown will be
displayed on the screen and the mode will be entered.
Silent Alarm
Silent Alarm awakes you using gentle vibrations from the Jarv
RunFit Activity Band. You can dismiss the alarm by pressing
the button on the RunFit Activity Band. Alarms can be set up
from: Purifit App Menu->Settings Interface -> Alarm
Notifications
You will be notified using a gentle vibration of incoming calls,
SMS, E-Mail, or alerts from the social apps. You can select
which type of alerts and notifications in the “Smart
Reminder” Section of the RunFit menu. Notifications can be
18
set up from: Purifit App Menu -> Settings Interface -> RunFit
menu -> SMS Reminder / Smart Reminder
Anti-Lost Menu
You will be notified using a gentle vibration if your phone is
out of range, 8 seconds after your phone and band are
disconnected the band will vibrate. Anti-Lost can be set up
from: Purifit App Menu -> Settings Interface -> RunFit menu
-> Anti-Lost
Sedentary Reminder
You will be notified using a gentle vibration if you have been
sedentary past the set time. Sedentary reminders can be set
up from: Purifit App Menu -> Settings Interface -> RunFit
menu -> Sedentary Reminder
19
WARRANTY
At Jarv, we are dedicated to making the best quality product.
To back this up, your Jarv RunFit Activity Band has a One (1)
year limited warranty, valid from the date of purchase.
Should you require additional information or have any
questions about your product or its warranty, please contact
us via email at:
Customer Service:
customerservice@jarvmobile.com
20
PRODUCT SPECIFICATIONS
Product
Display
Battery
Charging mode
Charging voltage
Standby time
Operation
Waterproof
Jarv RunFit Activity Band
0.91” OLED
90 mAh Li-Battery
USB cable
DC 5V
15-20 days
Touch key
IP65
REQUIREMENTS:
Android 4.4 or above / iOS 8.0 or above
Actual performance may vary due to the user's habits, different
modes of operation, and mobile phone settings. This manual is for
reference purposes only. The specifications and design of the activity
band may change without prior notice. Actual product may differ
slightly from the image on the packaging
21
WARNING AND PRECAUTIONS
1. This device is rated IP65 which means it is water-resistant
and is able to protect against water jets/water splashing but
cannot withstand immersion in water or long exposure to
water such as a shower or swimming.
2. To prevent fire or shock hazard, do not expose this unit to
excessive moisture or water
3. Lithium batteries, like all rechargeable batteries are
recyclable and should be recycled or disposed of in normal
household waste. Contact your local government for disposal
or recycling practices in your area. They should be
incinerated since they might explode.
CARE AND MAINTENANCE
Please do not use any corrosive chemical to clean the device,
use a soft cleaning cloth for the tracker and some mild soap
and water for the band. If your Jarv RunFit Activity Band does
get wet please dry it thoroughly before putting it back on.
22
NOTE: This device uses an internal rechargeable lithium-ion
battery that should last the lifetime of the device. If you
suspect your battery may be dead after several attempts to
charge, please visit www.jarvmobile.com for support.
Never disassemble the unit as that could cause leakage of
an electrolyte substance.
FCC WARNINGS
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC rules. These limits are designed to provide
reasonable protections against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
23
Open as PDF
Similar pages