2014 Infiniti Q50 | Quick Reference Guide

2014 Infiniti Q50
1520016_14b_Infiniti_Q50_QRG_090313.indd 3
Quick Reference Guide
9/3/13 4:02 PM
02
01
03
05
05
08
09
Behind
steering wheel
15
04 Behind
steering wheel
06
07
10
11
17
16
16
13
12
18
19
14
20
20
21
22
01 VEHICLE INFORMATION DISPLAY
02 LOW TIRE PRESSURE WARNING LIGHT
03 HEADLIGHT AND TURN SIGNAL CONTROL
04 PUSH BUTTON IGNITION SWITCH
05 PADDLE SHIFTERS*
06 WINDSHIELD WIPER AND WASHER SWITCH
07 CRUISE CONTROL/DRIVER’S
ASSISTANCE SWITCHES
12 VEHICLE DYNAMIC CONTROL (VDC)
OFF SWITCH*
13 TRUNK RELEASE SWITCH
14 HOOD RELEASE*
15 UPPER DISPLAY
16 CLIMATE CONTROL SWITCHES
17 LOWER DISPLAY
18 AUDIO SYSTEM
08 STEERING WHEEL SWITCHES FOR
AUDIO*/BLUETOOTH®
19 FRONT PASSENGER AIR BAG
STATUS LIGHT*
09 INSTRUMENT BRIGHTNESS CONTROL*/
TRIP RESET SWITCH
20 HEATED SEAT SWITCHES
10 VEHICLE INFORMATION DISPLAY SWITCHES
11 TILT AND TELESCOPIC STEERING COLUMN*
21 INFINITI CONTROLLER
22 DRIVE MODE SWITCH*
*See your Owner’s Manual for information.
1520016_14b_Infiniti_Q50_QRG_090313.indd 4
9/3/13 4:02 PM
table of contents
new system features
Main Interface Switches Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
User Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Upper Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Around View® Monitor (AVM) with
Moving Object Detection (MOD) (if so equipped) . . . . . . . . . . . . . . . . . . . . . 3
essential information
Tire Pressure Monitoring System (TPMS) with Tire Inflation Indicator . . . . 5
Loose Fuel Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Fuel-Filler Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Lower Display Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Driving Aids (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Active Lane Control (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Heated Steering Wheel (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
first drive features
INFINITI Intelligent Key System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Trunk Lid Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Seat Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Heated Seats (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Automatic Drive Positioner (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . 10
Outside Mirror Control Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Starting/Stopping the Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Headlight Control Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Windshield Wiper and Washer Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Climate Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
FM/AM/HD Radio®/SiriusXM Satellite Radio (SXM) (if so equipped) . . . . 14
USB/iPod® Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Conventional (Fixed Speed) Cruise Control . . . . . . . . . . . . . . . . . . . . . . . . . 15
Intelligent Cruise Control (ICC) System (if so equipped) . . . . . . . . . . . . . . . . . . . 16
system guide
Trip Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Bluetooth® Hands-free Phone System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
System Operating Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Navigation System (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
HomeLink® Universal Transceiver (if so equipped) . . . . . . . . . . . . . . . . . . 21
Please see your Owner’s Manual for important safety
information and system operation limitations.
• A cellular telephone should not be used for any purpose while
driving so full attention may be given to vehicle operation.
• Always wear your seat belt.
• Supplemental air bags do not replace proper seat belt usage.
• Children 12 and under should always ride in the rear seat
properly secured in child restraints or seat belts according to
their age and weight.
• Do not drink and drive.
For more information, refer to your InTouch™ Owner’s Manual,
the “Safety –– Seats, seat belts and supplemental restraint
system (section 1)” and the “Starting and driving (section 5)”
of your Owner’s Manual.
Additional information about your vehicle is also available
in your Owner’s Manual, Navigation System Owner’s Manual
and at www.InfinitiUSA.com.
1520016_14b_Infiniti_Q50_QRG_090313.indd 5
To view detailed
instructional videos, go to
www.infinitiownersinfo.mobi/2014/q50
or snap this barcode with an
appropriate barcode reader.
9/3/13 4:02 PM
new s y s te m f e a t u r e s
Main Interface Switches Overview
01 AUDIO – Press to navigate to the main audio screen.
From here all of the audio functions can be accessed.
02 MENU – Press to navigate to the main menu screen.
01
02
03
From here there is access to the navigation functions
and all the applications which include the settings application.
03 CLIMATE – Press to navigate to the CLIMATE controls screen. From here you have access to
climate control, heated steering wheel and heated seat functions.
For more information, refer to the “Getting Started (section 2)” of your InTouch Owner’s Manual.
User Registration
Driving positions, navigation, climate controls, etc.,
can be memorized for each user.
To register a new user:
1. Press the MENU button. The menu screen will appear.
2. Touch the right arrow key until Edit User is
displayed. Then touch Edit User.
3. Touch User List.
4. Touch Add New. From here you can edit Name and Picture.
5. Touch OK when finished.
For more information, refer to the “Information and Settings (section 8)” of your InTouch Owner’s Manual.
Upper Display
The upper display is controlled by touch screen,
Infiniti controller, and the
switch on the
steering wheel.
Press OK 01 on the Infiniti controller or OK on the
steering wheel switch to display the menu screen.
From here you are able to choose from audio
sources, map settings, hands-free phonebook and
adding new options.
03
Use the dial on the Infiniti controller to move the
02
cursor and press OK 01 to select an item.
While on the map screen, use the Infiniti controller
to navigate to another location on the map by
sliding the controller in the direction you would like to go.
02 button to return to the previous page.
Press the
01
Map and Display View (with Navigation)
There are different variations of split screen views that can be displayed on the upper
display. The map is always displayed on the right-hand side of the screen. Some of the left
side options are turn list, intersection, and turn-by-turn.
To customize the split screen views on the upper display:
1. When the current location map screen is displayed, press the MAP/VOICE 03 button on
the Infiniti controller and the display view bar will appear at the bottom of the screen.
2. Touch an icon on the display view bar or use the dial on the Infiniti controller to scroll
through the possible options. Press OK 01 to select one.
2
For more information, refer to the “Getting Started (section 2)” of your InTouch Owner’s Manual.
1520016_14b_Infiniti_Q50_QRG_090313.indd 2
9/3/13 4:02 PM
Around View® Monitor (AVM) with Moving Object Detection (MOD)
(if so equipped)
With the ignition switch in the ON position, the
Around View Monitor is activated by pressing the
CAMERA button 01 , located on the control panel,
or by moving the shift lever to the R (REVERSE)
position. The control panel displays various views
of the position of the vehicle.
01
When the shift lever is in the P (PARK), N (NEUTRAL)
or D (DRIVE) position and the CAMERA button 01 is
pressed, the following views will display in order:
Start from any Control Panel screen
Front view and bird’s-eye view
Press
Press
Press
Front view and front-side view
Front wide view
Press
When the shift lever is in the R (REVERSE) position and the CAMERA button 01 is pressed,
the following views will display in order:
Rear view and bird’s-eye view
Rear view and front-side view
Press
Rear wide view
Press
Press
3
1520016_14b_Infiniti_Q50_QRG_090313.indd 3
9/3/13 4:02 PM
new s y s te m f e a t u r e s
The colored guide lines on the display screen indicate vehicle width and approximate
distances to objects with reference to the vehicle body line.
• Red 1.5 ft (0.5 m); Yellow 3 ft (1 m); Green 7 ft (2 m) and 10 ft (3 m).
There are some areas where the system will not show objects.
• W
hen in the front or the rear view display, an
object below the bumper or on the ground may
not be viewed 02 .
• W
hen in the bird’s-eye view, a tall object near
the seam of the camera viewing areas 03
will not appear in the monitor.
02
The distance between objects viewed on the
AVM differs from the actual distance.
Objects in the bird’s-eye view will appear farther
than the actual distance.
MOVING OBJECT DETECTION (MOD)
If the MOD system detects moving objects
surrounding the vehicle, a yellow frame 04 will
be displayed on the camera image and a chime
will sound.
03
05
06
04
In the bird’s-eye view, a yellow frame is displayed
on those camera images (front, rear, right, left)
where moving objects are detected.
When the following are displayed:
07
• Blue MOD icon 05 ; the system is operative in this view.
• Gray MOD icon 06 ; the system is not operative in this view.
• No MOD icon; the system is off.
To temporarily turn the system on or off, touch the Sonar-MOD key 07 .
For more information, refer to the “Monitor System (section 7)” of your InTouch Owner’s Manual.
4
1520016_14b_Infiniti_Q50_QRG_090313.indd 4
9/3/13 4:02 PM
e s s e n t i a l i n f or mat ion
Tire Pressure Monitoring System (TPMS) with Tire Inflation Indicator
A Flat Tire Visit Dealer or Tire Pressure Low — Add
Air warning message will appear in the vehicle
information display 01 and the low tire pressure
warning light 02 will illuminate when one or more
tires are low in pressure and air is needed.
• T he tire pressures should be checked when
the tires are cold. The tires are considered cold
after the vehicle has been parked for 3 hours
or more or driven less than 1 mi (1.6 km) at
moderate speeds.
01
02
When adding air to an under-inflated tire, the TPMS
with Tire Inflation Indicator provides visual and
audible signals to help you inflate the tires to the recommended COLD tire pressure.
To use the tire inflation indicator:
1. Move the shift lever to the P (PARK) position and apply the parking brake.
2. Place the ignition switch in the ON position. Do not start the engine.
3. Add air to the under-inflated tire and within a few seconds, the hazard warning lights will
start flashing.
4. When the designated tire pressure is reached, the horn will beep once and the hazard
warning flashers will stop flashing.
5. Repeat this procedure for any additional under-inflated tires.
After tire pressures are adjusted, drive the vehicle at speeds above 16 MPH (25 km/h). The
Flat Tire Visit Dealer or Tire Pressure Low — Add Air warning message and low tire pressure
warning light will disappear.
When the low tire pressure warning light flashes for 1 minute and then remains on, the
TPMS is not functioning properly. Have the system checked by an INFINITI retailer.
Tire pressure rises and falls depending on the heat caused by the vehicle’s operation and the
outside temperature. Low outside temperature can lower the temperature of the air inside
the tire, which can cause a lower tire inflation pressure. This may cause the low tire pressure
warning light to illuminate. If the warning light illuminates, check the tire pressure in your tires.
• C
heck the tire pressure (including the spare tire) often and always prior to long
distance trips.
The Tire and Loading Information label contains valuable information. Please refer to
section 9, “Technical and consumer information”, in your Owner’s Manual for the location
of the Tire and Loading Information label.
For more information, refer to the “Instruments and controls (section 2)”, “Starting and driving (section 5)” and the
“Maintenance and do-it-yourself (section 8)” of your Owner’s Manual.
5
1520016_14b_Infiniti_Q50_QRG_090313.indd 5
9/3/13 4:03 PM
essent i al i n f o r m a t i o n
Loose Fuel Cap
A LOOSE FUEL CAP warning message will appear in
the vehicle information display 01 when the fuelfiller cap is not tightened correctly.
01
To tighten, turn the cap clockwise until a single click
is heard.
The warning message will disappear when the vehicle
detects the fuel-filler cap is properly tightened and
the
or
button 02 is pressed.
If the cap is not properly tightened, the Malfunction
Indicator Light
may illuminate.
For more information, refer to the “Instruments and controls (section 2)” and
the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
02
Fuel-Filler Door
The fuel-filler door is located on the right, rear side of the vehicle.
Unlock the fuel-filler door using one of the following operations, then push and release the left side of the door to open.
•
•
•
Push the door handle request switch while carrying
the INFINITI Intelligent Key with you.
Press the UNLOCK button on the Intelligent Key.
Push the power door lock switch to the UNLOCK position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Lower Display Maintenance
Only use a microfiber cloth to clean the lower display.
For more information, refer to the “Appearance and care (section 7)” of your Owner’s Manual.
Driving Aids (if so equipped)
The trip computer displays different driving aids including Forward Collision, Lane
Departure Prevention and Blind spot intervention, if they are currently activated.
To disable driving aids or warnings:
1. Press the MENU button just below the lower display.
2. Touch the right arrow key until you see Driver
Assistance. Touch the Driver Assistance key.
3. Touch the key that corresponds with the driving
aid or warning you would like to turn off (Forward
Assist, Lane Assist or Blind Spot Assist).
4. Select the driving aid line key to disable.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
6
1520016_14b_Infiniti_Q50_QRG_090313.indd 6
9/3/13 4:03 PM
Active Lane Control (if so equipped)
Active Lane Control assists in stable driving. The system corrects front tire angles and
steering wheel torque, allowing the driver to make fewer steering wheel corrections. These
corrections may cause slight steering wheel vibrations.
Active lane control is active when:
• The vehicle is driven at speeds of approximately 45 MPH and above.
• The Lane Departure Prevention and Active Lane Control systems are enabled in the
Settings menu.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Heated Steering Wheel (if so equipped)
The heated steering wheel system is designed to operate only when the surface
temperature of the steering wheel is below approximately 68°F (20°C). The steering wheel
heater will also turn off automatically after approximately 30 minutes.
To manually turn on the heated steering wheel, touch the steering wheel heater icon 01
within the CLIMATE control screen in the lower display. The indicator light will illuminate.
AUTOMATIC STEERING WHEEL HEATER
When turned on, the steering wheel heater will
automatically heat the steering wheel whenever the
temperature inside the vehicle compartment is below
approximately 68°F (20°C) at the time of pushing the
ignition to the ON position. The temperature of the
steering wheel will also fluctuate while turned on.
01
To turn on the automatic steering wheel heater:
1. Press the MENU button just below the lower display.
2. Touch the Settings key.
3. Touch the right arrow key until you see Others.
Touch the Others key.
4. Touch Climate.
5. Touch Auto Steering Wheel Heater 02 to turn on.
02
For more information, refer to the “Heater and air conditioner (section 3)” of your InTouch Owner’s Manual.
7
1520016_14b_Infiniti_Q50_QRG_090313.indd 7
9/3/13 4:03 PM
f i rst dr i v e f e a t u r e s
INFINITI Intelligent Key System
The INFINITI Intelligent Key system allows you to lock or unlock the
02
vehicle, open the trunk and start the engine. It is important to make
sure the Intelligent Key is with you (that is, in your pocket or purse).
The operating range of the Intelligent Key is within 31.5 in
(80 cm) from each request switch.
01
To lock the vehicle, push either door handle request switch
button 03 on the key fob.
01 once or press the
To unlock the vehicle, perform one of the following procedures:
• Touch the inside of the door handle 02 to unlock the corresponding
door. Pressing the request switch 01 while touching the inside of the
door handle will unlock the rest of the doors, or
03
• Press the button 04 on the key fob to unlock the driver’s side door.
04
Press the button again; all other doors will unlock.
To release the trunk lid, press the
button 05 for more than 1 second.
05
Lift the trunk lid to access the trunk.
06
The Intelligent Key can also be used to activate the panic alarm by pressing
and holding the button 06 for more than 1 second. Once activated, the
panic alarm and headlights will stay on for a period of time.
INFINITI INTELLIGENT KEY BATTERY DISCHARGE
If the battery of the Intelligent Key is discharged, or environmental conditions interfere
with the Intelligent Key operation, start the engine according to the following procedure:
1. Move the shift lever to the P (Park) position.
2. Firmly apply the foot brake.
3. Touch the ignition switch with the Intelligent Key
and a chime will sound.
4. Within 10 seconds after the chime sounds, push
the ignition switch while depressing the brake
pedal and the engine will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, “Starting and driving (section 5)” and the
“Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
Trunk Lid Release
Use one of the following methods to open the trunk:
Push the trunk open request switch 01 for
more than 1 second while carrying the INFINITI
Intelligent Key with you.
Press the trunk button HOLD on the Intelligent Key
for more than 1 second.
From inside the vehicle, push down on the trunk lid
release switch 02 on the instrument panel.
To completely disable all power to the trunk lid,
push the trunk release power cancel switch located
in the glove box 03 to the OFF position. While in
this position, the trunk lid cannot be opened
with the trunk open request switch 01 , trunk
button
or the trunk lid release switch 02 .
HOLD
01
02
03
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
8
1520016_14b_Infiniti_Q50_QRG_090313.indd 8
9/3/13 4:03 PM
Seat Adjustments
POWER SEAT ADJUSTMENTS
To slide the seat forward or backward, push the
control switch
01 forward or backward.
To recline the seatback, push the switch
forward or backward.
04
03
01
05
02
02
SEAT LIFTER
To adjust the angle of the front portion or height of the seat, push the front or rear end of
the switch
01 up or down.
POWER LUMBAR SUPPORT (if so equipped)
To adjust the seat lumbar support, push the front or back end of the switch
03 .
MANUAL LUMBAR SUPPORT (if so equipped)
To adjust the seat lumbar support, move the lever up or down.
SIDE SUPPORT (driver’s seat only) (if so equipped)
The driver’s seat side support adjusts the support on your torso.
Push the switch 04 away from you to loosen the support or pull the switch 04 toward you
for more support.
MANUAL THIGH EXTENSION (if so equipped)
To slide the thigh extension forward or backward, pull up on the lever 05 under the front of
the seat and slide forward or backward. Release the lever to lock the seat in position.
For more information, refer to the “Safety – Seats, seat belts and supplemental restraint system (section 1)” of your Owner’s Manual.
Heated Seats (if so equipped)
There are 2 ways to operate the heated seats:
1. Press the heated seat switch 01 .
• Every press of the switch allows you to
cycle through the 5 different modes of
AUTO – High – Mid – Low – OFF.
2. While on the CLIMATE control screen on the lower
display, touch the left or right heated seat icon 02 .
• T he Left or Right Seat Setting screen is
displayed with a list of the 5 different modes of
AUTO – High – Mid – Low – OFF to choose from.
02
02
03
01
01
• The indicator light on the heated seat switch
01 will illuminate when the system is in AUTO – High – Mid – Low.
• W
hile in AUTO, the heated seats will turn on and off automatically, depending on
temperature conditions in the vehicle compartment.
• T o view which of the 5 modes the system is in, press the CLIMATE button 03 . This
will bring up the CLIMATE control screen on the lower display. From here you will see
the heated seat icons 02 for the driver and passenger side, and below the icon is
the mode the system is in currently.
For more information, refer to the “Heater and air conditioner (section 3)” of your InTouch Owner’s Manual.
9
1520016_14b_Infiniti_Q50_QRG_090313.indd 9
9/3/13 4:03 PM
f i rst dr i v e f e a t u r e s
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner memory.
Follow this procedure to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Push the ignition switch to the ON position.
• A
djust the driver’s seat, steering column and outside mirrors to the desired positions,
using the adjusting switches for each feature.
• P
ush the SET switch and within 5 seconds push the memory switch (1 or 2) for at
least 1 second.
• T he indicator light on the memory switch you select will illuminate for approximately
5 seconds.
• T he driver’s seat, steering column and outside mirror positions are now set to
your preference.
When you turn off your vehicle, the driver’s seat, steering column and outside mirror positions
are automatically remembered and recalled the next time you log into your vehicle.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual and
“Information and Settings (section 8)” of your InTouch Owner’s Manual.
Outside Mirror Control Switch
To select the right or left side mirror, move the
control switch 01 right or left.
01
02
Adjust each mirror to the desired position using
the switch 02 .
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
Starting/Stopping the Engine
It is important to make sure the INFINITI Intelligent
Key is with you (that is, in your pocket or purse).
Depress the brake pedal.
Press the ignition switch START/STOP button to
start the engine.
TURNING THE ENGINE OFF
Move the shift lever to the P (PARK) position and
apply the parking brake.
Press the ignition switch START/STOP button to turn the engine off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
10
1520016_14b_Infiniti_Q50_QRG_090313.indd 10
9/3/13 4:03 PM
Headlight Control Switch
HEADLIGHT CONTROL
Turn the headlight control switch to the
position
01 to turn on the front parking, side marker, tail, license
plate and instrument panel lights. Turn the switch to the
position 02 to turn on the headlights.
03
01
02
AUTOLIGHT SYSTEM
The autolight system will automatically turn the headlights on when it is dark and off when
it is light. The system will keep the headlights on for a period of time after you turn the
ignition off and all doors are closed.
To activate the autolight system, turn the headlight control switch to the AUTO position 03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF position,
position 01 or
position 02 .
HIGH BEAM SELECT
To manually select the high beam function:
1. Turn the headlight control switch to the
position 02 .
2. P
ush the headlight control switch 04 forward to
select the high beam function. The blue indicator
light
illuminates in the instrument panel.
Pull the headlight switch back to the original
position to select the low beam. The blue
indicator light will extinguish.
04
05
Pull and release the headlight control switch 05 to flash the headlight high beams on and off.
HIGH BEAM ASSIST (if so equipped)
The High Beam Assist system will operate when
the vehicle is driven at approximately 22 MPH (35 km/h) and above. If an oncoming vehicle
or leading vehicle appears in front of your vehicle when the high beam is on, the headlights
will automatically be switched to the low beam.
Following the procedure below only activates the High Beam Assist system. This does not
necessarily turn on the high beam, even if there is no other traffic. Both ambient light and
traffic conditions have to be correct for the high beam to illuminate.
To activate High Beam Assist, turn the headlight control switch to the AUTO position 03 and
push the headlight control switch 04 forward to turn on the high beam. The high beam
assist indicator light
will illuminate.
FOG LIGHT SWITCH
The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the
to turn the fog lights on.
position 06
Turn the switch (inside collar) to the OFF position to
turn the fog lights off.
06
For more information, refer to the “Instruments and controls (section 2)” of
your Owner’s Manual.
11
1520016_14b_Infiniti_Q50_QRG_090313.indd 11
9/3/13 4:03 PM
f i rst dr i v e f e a t u r e s
Windshield Wiper and Washer Switch
RAIN-SENSING AUTO WIPER SYSTEM (if so equipped)
Move the lever to the following positions to operate
the windshield wipers:
01 Mist (MIST) – One sweep operation of the wipers.
02 Auto (Auto) – Operates the rain-sensing wipers
MIST
03
01
OFF
AUTO 02
intermittently. The intermittent speed can be
adjusted by twisting the time control ring 03
to increase or decrease wiper sensitivity.
LO
04
HI
05
04 Low (LO) – Wipers operate at a continuous
05 High (HI) – Wipers operate at a continuous
06 Pull the lever toward you to activate the washer. The wipers will operate several times.
low speed.
06
high speed.
PULLING UP THE WIPER ARM
Within 1 minute of placing the ignition into the OFF position, quickly move the lever to the
MIST 01 position twice.
This will place the wiper arms into the service position to allow removal of the wiper blades.
To return the wiper arms to the original position, move the lever to the MIST 01 position again.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Climate Controls
06
03
02
04
08
05
11
04
10
06
09
07
12
01
13
01 CLIMATE BUTTON
Press to display the CLIMATE control screen on the lower display.
02 DRIVER’S SIDE TEMPERATURE CONTROL BUTTONS
Press the driver’s side temperature control buttons up for warmer air or down
for cooler air.
03 PASSENGER’S SIDE TEMPERATURE CONTROL BUTTONS
To manually adjust the passenger’s side temperature, press the passenger’s side
temperature control buttons up for warmer air or down for cooler air.
12
1520016_14b_Infiniti_Q50_QRG_090313.indd 12
9/3/13 4:03 PM
04 FAN SPEED CONTROL
To manually adjust the fan speed, press the
button or touch the
key to increase
the fan speed. Press the button or touch the
key to decrease the fan speed.
05 AUTO BUTTON
Press the AUTO button to turn the system on and the system will automatically control
the inside temperature (automatic cooling and/or dehumidified heating), air flow
distribution and fan speed.
06 MODE CONTROL
Press the
button or touch the
key in the center of the lower display to cycle
through the following air flow outlets:
Air flows from the center and side vents.
Air flows from the center, side and foot vents.
Air flows mainly from the foot vents.
Air flows from the defroster and foot vents.
07 AUTO AIR RECIRCULATION KEY (if so equipped)
Touch to allow inside air recirculation and outside air circulation to switch
automatically, depending on the quality of the outside air.
08 INTAKE AIR CONTROL BUTTON
Pressing the intake air control button
will cancel auto air recirculation 07
(if so equipped) until it is re-activated from the touch screen (see above). Press the
intake air control button
to manually control whether the interior air is recirculated
or outside air is drawn into the vehicle. When the indicator light is on, interior air
is recirculated, outside odors are avoided and interior vehicle temperature is most
effectively maintained.
The air recirculation mode cannot be activated when the climate control system is in the
front defroster mode
or the front defroster foot vent mode .
09 A/C Key
Touch the A/C key to turn the air conditioner system on or off. This system helps cool
and dehumidify the air inside the cabin and defog the windows.
10 DUAL KEY
Touch to turn the passenger’s side temperature controls on or off. When the system
is on, the indicator light will illuminate. This function will allow the passenger’s side
temperature to be adjusted independently from the driver’s side by pressing the
passenger’s side temperature control buttons 03 .
11 DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS
Press the defroster control button
to turn the system on. The A/C automatically turns
on when the defroster mode is selected. This feature removes humidity from the air.
To defrost the front and side windows, set the temperature controls 02 and fan speed
controls 04 to their maximum settings.
12 DEFROSTING REAR WINDOW AND OUTSIDE MIRRORS
Push the rear window defroster switch to turn the system on or off.
This function automatically turns off after approximately 15 minutes.
13 ON/OFF BUTTON
Press the ON/OFF button to turn the climate control system off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual and the “Heater and Air
Conditioner (section 3)” of your InTouch Owner’s Manual.
13
1520016_14b_Infiniti_Q50_QRG_090313.indd 13
9/3/13 4:03 PM
f i rst dr i v e f e a t u r e s
07
08
08
01
02
03
05
06
04
FM/AM/HD Radio®/SiriusXM* Satellite Radio (SXM) (if so equipped)
01 AUDIO BUTTON
Press to display the AUDIO screen on the lower display.
(POWER) BUTTON
Turn the VOL/ dial right or left to increase or decrease the volume. Press the button
to turn the system on or off.
SEEK•CAT/TRACK BUTTON
To scan quickly through each broadcasting station, press the SEEK•CAT/TRACK button
to stop at the previous or next broadcast station.
For SiriusXM Satellite Radio, press the SEEK•CAT/TRACK button to switch to the first
channel of the previous or next category.
For HD Radio®, press the SEEK•CAT/TRACK button to change the station.
Press the SEEK•CAT/TRACK button to change tracks on a CD.
Press and hold the SEEK•CAT/TRACK button to fast forward or rewind a track on a CD.
TUNE•CH/FOLDER BUTTON
To manually tune the radio, press the TUNE•CH/FOLDER button left or right.
Press and hold the TUNE•CH/FOLDER button left or right to accelerate radio tuning.
RADIO BUTTON
Press to change the radio band in the order of AM, FM and SXM (SiriusXM).
02 VOLUME CONTROL DIAL/
03
04
05
06 DISC•AUX BUTTON
Press to change the audio source (CD, iPod®, USB, Bluetooth® Streaming Audio or AUX).
07 STATION PRESET KEYS
Up to 36 stations/channels can be set for AM, FM and SXM (SiriusXM).
To store a station in a preset, you must first select a radio band by pressing the RADIO
button then tune to the desired AM, FM or SXM station.
Now select and hold the desired station memory key (1-36) until the preset number is
updated on the display and a beep is heard. Programming is now complete.
To retrieve a previously set station, arrow right or left 08 and touch the memory key
(1-36) that contains the stored station/channel you wish to listen to.
*SiriusXM Satellite Radio is only available on vehicles equipped with optional SiriusXM Satellite Radio subscription service.
For more information, refer to the “Audio system (section 4)” of your InTouch Owner’s Manual.
14
1520016_14b_Infiniti_Q50_QRG_090313.indd 14
9/3/13 4:03 PM
USB/iPod® Interface
The USB jack 01 is located in the center console
under the armrest.
02
01
When a compatible USB memory device or iPod® is
plugged into the USB jack:
• A confirmation message appears. Select “Yes” if you prefer to use the USB device with
voice recognition in which song titles and artist names are registered in the system.
• Compatible audio and video files stored on the device can be played through the
vehicle’s audio system and front display.
If two USB devices are plugged in at the same time, you are able to use Voice
Recognition to choose which one should play. Just press the Talk button
on the
steering wheel to activate Voice Recognition and follow the voice prompts.
This vehicle is equipped with Audio and Video RCA inputs 02 . This will allow you to play
audio and video through your vehicle from an external source.
For more information, refer to the “Getting Started (section 2)”, “Audio system (section 4)” and the “Voice recognition
(section 10)” of your InTouch Owner’s Manual.
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a constant cruising speed once the vehicle
has reached 25 MPH (40 km/h).
The system will automatically maintain the set speed until you tap the brake pedal,
accelerate, cancel or turn the system off.
To activate the cruise control, push the ON/OFF switch. The CRUISE indicator light in the
instrument panel will illuminate.
To set cruising speed, accelerate the vehicle to the desired speed, push the SET – switch
and release. The CRUISE SET indicator light in the instrument panel will illuminate. Take
your foot off the accelerator pedal. Your vehicle will maintain the set speed.
To reset at a faster cruising speed, push and hold the RES + switch. When the vehicle
attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the SET – switch. Release the switch
when the vehicle slows to the desired speed.
To cancel the preset speed, tap the brake pedal or push the CANCEL switch.
To turn off cruise control, push the ON/OFF switch. The CRUISE indicator light in the
instrument panel will extinguish.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
15
1520016_14b_Infiniti_Q50_QRG_090313.indd 15
9/3/13 4:03 PM
f i rst dr i v e f e a t u r e s
Intelligent Cruise Control (ICC) System (if so equipped)
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE
04
To set vehicle-to-vehicle distance control mode,
press the
button 01 for less than 1.5 seconds.
The gray
indicator light 02 will illuminate.
07
08
03
01
Accelerate to the desired speed.
Push down on the SET – switch 03 and release
it. Intelligent cruise control will be set to the
desired speed.
Press the distance button 04 repeatedly to change
the set distance between long, middle and short.
When a vehicle is not detected ahead of you in the
lane, the set distance and set vehicle speed
indicator lights will illuminate 05 in set mode.
When a vehicle is detected ahead of you in the lane,
the vehicle ahead detection, set distance and set
vehicle speed indicator lights will illuminate 06 in
set mode.
To reset at a faster cruising speed, push up and
hold the RES + switch 07 . When the vehicle attains
the desired speed, release the switch.
02
05
06
To reset at a slower cruising speed, push down and
hold the SET – switch 03 . Release the switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch 08 . The set vehicle speed indicator
05 will change to grey.
To turn off cruise control, press the
instrument panel will extinguish.
button 01 . The
indicator light 02 in the
To set conventional (fixed speed) cruise control mode:
While cruise control is off, press the
button 01 and hold it down for more than 1.5
seconds. The grey
indicator light will illuminate.
Accelerate to the desired speed.
Push down on the SET – switch and release it. The green
Cruise control should be set to the desired speed.
indicator light will illuminate.
To switch between the two cruise control modes:
When one of the two cruise modes is in use, you must turn the system off and then turn it
on again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
16
1520016_14b_Infiniti_Q50_QRG_090313.indd 16
9/3/13 4:03 PM
s y s t em guide
Trip Computer
When the
or
button 01 is pressed,
the following modes will appear on the vehicle
information display 02 :
01
• F uel Economy – Displays the current fuel
consumption.
• A
verage Speed – Displays the average vehicle
speed since the last reset.
• D
istance/Time – Displays the elapsed time and
total distance the vehicle has been driven since
the last reset.
• RANGE – Displays the estimated distance to empty
(dte) the vehicle can be driven before refueling.
• N
avigation (if so equipped) – Displays the
navigation route information when route guidance is set in the navigation system.
• Audio – Displays the status of audio information.
• Driving Aids (if so equipped) – Displays driving aid status.
• Tire Pressure (if so equipped) – Displays the current tire pressure in each tire.
• Chassis Control – Displays the status of Active Lane Control and Active Trace Control.
• Warning – Displays when a warning is present.
02
03
Push the TRIP RESET switch 03 for approximately 1 second to reset the currently
displayed trip odometer to zero.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Bluetooth® Hands-free Phone System
A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
Bluetooth® Controls
SYSTEM OPERATING TIPS
Press the button to interrupt the voice prompts at
any time and speak a command after the tone.
Close all windows and turn vents away from the
ceiling. Surrounding noises may interfere with system
operation and performance.
Press the button on the steering wheel to activate
voice recognition.
Microphone
Wait for the tone before speaking.
Begin speaking a command within 5 seconds of
the tone.
Speak in a clear and natural voice without pausing between words.
*Some jurisdictions prohibit the use of cellular telephones while driving.
1520016_14b_Infiniti_Q50_QRG_090313.indd 17
17
9/3/13 4:03 PM
syste m g ui d e
Look straight ahead and avoid speaking too loudly or too softly.
To go back to the previous command, say “Go back”.
To cancel a voice recognition session, say “Exit” or press and hold the
button.
To decrease or increase the volume of the voice prompts, push the volume control
switches or on the steering wheel or turn the VOL/ button on the audio system
while the system is responding.
Please refer to the cellular phone manufacturer’s Owner’s Manual for detailed
information regarding your Bluetooth® phone.
To reduce the length of spoken prompts, you can select “Minimize Voice Feedback” in
the voice recognition settings menu.
The voice recognition system allows you to choose between voice input and manual
controls of lists. Choose the method that is easiest for you. For example, when a list is
shown, you can use the
switch on the steering wheel to select an item from the
displayed list instead of saying the item.
When using the
feature to navigate lists during voice recognition, use the spoken
menu readout feature to help navigate the list easily. Voice input is paused when
menu control is activated. To resume voice recognition, select a menu item by pushing
the
switch or simply push the button.
CONNECTING PROCEDURE
The vehicle must be stationary when
connecting the phone.
1.Press the MENU button below the lower display
and touch the Settings key.
2.Touch Bluetooth.
3.Touch Connect Device and then touch
Add New.
4. Initiate connecting from the phone.
• The connecting procedure varies according
to each cellular phone model. For detailed
connecting instructions and a list of
compatible phones, please visit
www.InfinitiUSA.com/bluetooth.
• When prompted for a PIN code, enter the
PIN code that appears on the screen into
the handset.
5. When connecting is complete, the screen will
return to the previous screen.
18
1520016_14b_Infiniti_Q50_QRG_090313.indd 18
9/3/13 4:03 PM
PHONEBOOK SETUP
Depending on your cellular phone, the system may automatically download your cellular
phone’s entire phonebook to the vehicle’s Bluetooth® system.
If the phonebook does not download automatically, the vehicle phonebook may be set up for
manual entry.
To manually download entries:
1.Press the MENU button just below the lower display.
2.Touch the Settings key.
3.Touch Phone/Mail.
4.Touch Phone Settings.
5.Touch Phonebook/Favorites Settings.
6.Touch Configure Phonebook Settings.
7.Touch Manual Phonebook Transfer.
• F rom here you are able to transfer information
from your cellular phone to your vehicle.
MAKING A CALL FROM THE PHONEBOOK
1. Press the button on the steering wheel.
2. After waiting for the tone, say “Phone”.
3. After waiting for the tone, say “Call”.
4.After the next tone, speak the name of a phonebook entry. For example, “Michael Smith”.
In some cases, names stored using all UPPERCASE letters may not be recognized by
the Voice Recognition system.
MAKING A CALL BY PHONE NUMBER
1. Press the button on the steering wheel. A tone will sound.
2. After waiting for the tone, say “Phone”.
3.After waiting for the tone, say “Dial”.
4.Say the number you wish to call, starting with the area code in single digit format.
5.When you have finished speaking the phone number, the system repeats it back and
announces the available commands.
6. Say “Dial”. The system acknowledges the command and makes the call.
19
1520016_14b_Infiniti_Q50_QRG_090313.indd 19
9/3/13 4:03 PM
syste m g ui d e
RECEIVING/ENDING A CALL
To accept the call, press the button on the
steering wheel or touch the Answer key.
To reject the call, touch the Decline key.
To hang up, press the
Hang Up key.
button or touch the
For more information, refer to the “Hands-Free Phone (section 5)” and
“Voice recognition (section 10) of your InTouch Owner’s Manual or
please visit www.InfinitiUSA.com/bluetooth.
Navigation System (if so equipped)
I NFINITI CONTROLLER – Turn to highlight
an item and press ENTER to select the
highlighted item on the upper display
menu screen. On the map screen, turn to
adjust the map scale. To scroll the map,
push the controller in the direction you
want to scroll.
01
03
01 Upper Display – Displays the map and can
be controlled by the Infiniti controller.
02 Lower Display – Displays navigation
02
04
05
07
06
functions and is not controlled by the
Infiniti controller. Press the MENU button
below the lower display to access the
navigation functions.
03 Map Scale – Touch to display the scale
bar. Touch ZOOM IN or ZOOM OUT to
adjust the map scale.
04 Street Address – Touch to search for a destination by entering an address.
05 Points of Interest – Touch to search for a destination from different categories of
businesses or locations.
06 Home – Touch to search for a route from the vehicle’s current location to the stored
home location.
07 Destination – Touch to view multiple ways to set a destination.
For more information, refer to the “Navigation (section 9)” of your InTouch Owner’s Manual.
20
1520016_14b_Infiniti_Q50_QRG_090313.indd 20
9/3/13 4:03 PM
HomeLink® Universal Transceiver (if so equipped)
HOMELINK
The HomeLink system can learn and consolidate the functions of up to 3 different handheld transmitters, operating items such as garage doors, property gates, outdoor and
indoor lights or alarm systems.
To program the HomeLink® Universal Transceiver:
–Position the handheld transceiver 1-3 in (26-76 mm) away from the HomeLink surface,
keeping the HomeLink indicator light in view.
–Press and hold the desired HomeLink button and the handheld transmitter button
simultaneously until the HomeLink indicator light flashes slowly and then rapidly.
– Both buttons may be released when the indicator light flashes rapidly.
To verify the programing is complete, press and hold the HomeLink button and observe the
indicator light:
–A solid continuous light indicates the programing is complete and the HomeLink button
will activate your device.
–A blinking light that turns to a solid continuous light after 2 seconds indicates
additional steps are required to complete the programing.
An additional person may make the remaining steps easier. To complete the
programing process:
–At the receiver of the device that you are programing to the HomeLink button, press and
release the learn or smart button (the name may vary by manufacturer, but it is usually
located near where the hanging antenna wire is attached to the unit). You have
approximately 30 seconds to initiate the following step.
– Press and hold the programed HomeLink button for 2 seconds and release.
Repeat the previous 2 steps up to 3 times to complete the programing process. HomeLink
should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink website at
www.homelink.com or call 1-800-355-3515.
21
1520016_14b_Infiniti_Q50_QRG_090313.indd 21
9/3/13 4:03 PM
Printing: August 2013 (02) / QR14E 0V37U1 / Printed in USA
To view detailed instructional videos,
go to www.infinitiownersinfo.mobi/2014/q50
or snap this barcode with an appropriate
barcode reader.
This Quick Reference Guide is intended to provide an overview of some of the unique features
of your new vehicle. See your Owner’s Manual, which contains important safety warnings and
information about the operation and maintenance of your vehicle, for complete details. Nissan
North America, Inc. reserves the right to make changes, at any time, without prior notice, in prices,
colors, materials, equipment, specifications, and models and to discontinue models or equipment.
Due to continuous product development and other pre- and post-production factors, actual vehicle,
materials and specifications may vary. Some vehicles are shown with optional equipment. See
the actual vehicle for complete accuracy. Specifications, options and accessories may differ in
Hawaii, U.S. territories and other countries. For additional information on availability, options or
accessories, see your INFINITI retailer or contact Nissan North America, Inc.
1520016_14b_Infiniti_Q50_QRG_090313.indd 2
9/3/13 4:02 PM
Open as PDF
Similar pages