SCT4000 Contact Toaster Spec Sheet

Job
Item No.
Contact Toaster
SCT4000
SCT4000E
FEATURES
• Dual, three [3] bun wide toasting makes the toaster capable of
producing up to 3,820 buns per hour
• First bun[s] pass-through time is as low as 12 seconds fully
SCT4000
SCT4000E
DESCRIPTION
Star contact toasters are designed with speed and consistency
in mind. The optional programmable electronic control means
toasting buns the same way in any number of locations is as simple
as plugging in a USB drive. The three [3] bun wide dual side design
allows for a production speed unmatched by other toasters.
SPECIFICATIONS
The Star contact toaster will be constructed in the U.S.A. with
a corrosion-resistant stainless steel body. Electronic controlled
units will be supplied with a high-contrast color display, high limit
switch, variable speed control for front and rear conveyors, and
electronic temperature control. Analog units will be controlled by
a bulb and cap thermostat and will also utilize a high limit switch.
The electronic unit will be capable of storing an unlimited number
of product setups, and will run from default settings initially. The
conveyors will be driven by stepper motors. The conveyors will
use a single-piece silicone belts, and will fold out and be removable for cleaning. The units will be capable of running in a range
between 208 V and 240 V, and will be single phase. The unit will
use a NEMA 6-15P plug. The plate will operate at temperatures up
to 550°F (288°C). The toaster will be capable of producing up to
3,820 buns per hour.
WARRANTY
caramelized, with each additional bun as fast as 2.82 second
intervals
• Bun height adjustment controlled with a simple knob in six
steps ranging from 0.3125 in. (8 mm) to 1.075 in. (27 mm)
[adjusted independently front and rear]
• Supplied with an easy-to-install non-stick sheet
• Single piece front and rear silicone belts
OPTIONAL ELECTRONIC CONTROL VERSION
• Optional high-contrast digital display allows for an infinite
number of programmed product settings and instant
adjustments to speed and temperature up to 550°F (288°C)
• Optional electronic programming allows for consistent,
repeatable results across any number of toasters and USB
port allows easy uploading of new product files
• Optional electronic control allows for independent speed control
for front and rear belts
• Advanced stepper motor technology for precise speed control
and with no gears to strip, translates to a long life
OPTIONS & ACCESSORIES
• Programmable electronic speed and heat control
• 10-pack of replacement non-stick sheets [SCTSHEET-D for
standard dry operation or SCTSHEET-B for use with butter]
• Butter wheel
-perforated version [part number SCTBWP]
-smooth version [part number SCTBWS]
CERTIFICATIONS
USA
MADE IN THE
These units come with a one [1] year warranty for parts and labor.
STAR MANUFACTURING INTERNATIONAL INC.
10 Sunnen Drive • Saint Louis, Missouri 63143
Telephone 888 356 5362 • Fax 314 781 5445
www.star-mfg.com
Printed in the U.S.A. • 2M-Z21296 • Rev C • 03.2017
Specifications are subject to change without notice
and are not intended for installation purposes.
Contact Toaster
SCT4000
21.7 in.
(551 mm)
SCT4000E
SCT4000E shown.
25.7 in.
(653 mm)
6.25 in.
(159 mm)
0.5 in.
0.9 in.
(13 mm) (23 mm)
[toaster opening]
0.6 in.
(15 mm)
0.6 in.
(15 mm)
2.375 in.
(60 mm)
13 in.
(330 mm)
9.5 in.
(241 mm)
1 in.
(25 mm)
CLEARANCE
Please allow at least one [1] inch (25 mm) on each
side of unit and the rear of the unit.
MODEL
HEIGHT
WIDTH
DEPTH1
VOLTS
AMPS
WATTS
NEMA
PLUG
APPROX. SHIP
WEIGHT
APPROX. WEIGHT
INSTALLED
SCT4000E
25.7 in.
(653 mm)
21.7 in.
(551 mm)
9.5 in.
(241 mm)
208
230
240
9.6
10.6
11.1
2,000
2,446
2,663
6-15P
CEE7-7
6-15P
100 lb.
(45.4 kg)
75 lb.
(34 kg)
SCT4000
25.7 in.
(653 mm)
21.7 in.
(551 mm)
9.5 in.
(241 mm)
208
230
240
9.9
11
11.5
2,065
2.525
2,750
6-15P
CEE7-7
6-15P
100 lb.
(45.4 kg)
75 lb.
(34 kg)
1without butter wheel [butter wheel extends out and adds 4.2 in. (107 mm) to unit depth].
CEE7-7
6-15P
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change
without notice. While Star Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or
omissions in information provided or conclusions reached as a result of using the specifications. By using the information provided, the user assumes
all risks in connection with such use.
STAR MANUFACTURING INTERNATIONAL INC.
10 Sunnen Drive • Saint Louis, Missouri 63143
Telephone 888 356 5362 • Fax 314 781 5445
www.star-mfg.com
Printed in the U.S.A. • 2M-Z21296 • Rev C • 03.2017
Please refer to the owner’s manual for information
regarding installation or use.
Open as PDF
Similar pages