Philips DSR7005 Digital Satellite Receiver

Für eine bessere Unterstützung können Sie sich registrieren
www.philips.com/welcome
DE
Benutzerhandbuch
2
NL
Handleiding
46
TU
Kullan›m K›lavuzunuz
88
RU
Руководство по эксплуатации
130
EN
User manual
172
DSR 7005
Meaning of symbols
Important information:
Must be read and understood.
Your product has been designed and manufactured with high quality
materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product or
his packaging, it means the product is covered by European Directive
2002/96/EC.
Please inform yourself about the local separate collection system for
electronic products.
Please act according to your local rules and do not dispose of your old
products with your normal household waste.The correct disposal of
your old product will help prevent potential negative consequences for
the environment and human health.
The “Material recyclability symbol” affixed on package cardboard and
user manual means these parts are recyclable.
So do not dispose of them with your normal household waste.
02
The “Material recyclability symbol” affixed on plastic packaging parts
means these parts are recyclable.
So do not dispose of them with your normal household waste.
The “Green Dot” affixed on cardboard means PHILIPS pays a financial
duty to the “Avoidance and Recovery of Packaging Waste” organization.
Register for better support
www.philips.com/welcome
172
Meaning of symbols
Unpacking the receiver
As you unpack your terminal, make sure the following accessories are included:
• 1 x Remote Control Unit
• 2 x AA batteries
• 1 x SCART Cable
• 1 x Power Cord
• 1 x RF short cable
• 1 x User Manual (including the Worldwide Warranty)
Plastic bags can be dangerous.To avoid suffocation keep the bag away from babies and children.
Quick installation guide
Lead from your
TV antenna
ENGLISH
Refer to the safety section before connecting your terminal.
1 Disconnect your TV set and recorder from the mains.
2 Integrate your terminal in your existing installation as shown on the diagram (for other satellite
configurations, refer to chapter Connecting your Receiver)
3 To be able to use the simultaneous recording function it is strongly advised to have two
separate inputs for each tuner.
TV set
Recorder
PHILIPS
IN FROM ANT
EXT 1
OUT TO ANT
EXT 2
SCART
Satellite Receiver
Lead from
satellite dish
(Unicable or
dual LNB
advised)
Refer to paragraph "Antenna settings" for a complete description of tuner connection.
Quick installation guide
173
4
If you wish to receive scrambled channels, insert your smart card (not supplied) in the
common interface module (not supplied) with the golden or silver contacts facing up.Then,
insert the common interface in the dedicated slot of your receiver.
Note:The functionality of using two tuners (watch and record) can not be guaranteed in
combination with a Common Interface module that is decoding one channel only.
5 Insert the two batteries supplied in your remote control.
Batteries are removable from the remote using common household
tools (like a screwdriver,…)
The batteries supplied do not contain hazardous substances such
as Mercury, Cadmium, or Lead.
However, they must not be disposed of with your household waste
but to a local separate collection system.
6
7
8
9
10
Reconnect your TV set and recorder to the mains. Do not connect your receiver yet!
Switch on your TV set and select a channel.
Plug the receiver’s power cord to the mains.
Switch the power key on the back of your receiver on the position “I”
The satellite receiver is now switched on and starting.This can take around 30 seconds. Front
display indicates “Booting”
11 From now on you can switch your receiver with the “Standby-key” on or off (almost instantly).
12 The welcome screen appears, then the First installation screen.
13 Set your favourite menu language
14 Set appropriate values for each component (note that the settings can be modified later; for
more details refer to First Installation)
15 Press EXIT to save your changes and start scanning for channels.
When scanning has been successfully completed, a completion message is displayed, and then the
receiver tunes to the first channel in the list.
174
Quick installation guide
Safety instructions
Your receiver has been manufactured to meet the appropriate safety standards, but the
instructions below must be followed to operate it safely.These instructions must be kept for
future reference.
- Before connecting the receiver to the mains, check that the mains supply voltage corresponds to
the voltage printed on the rear of the receiver. If the mains voltage is different, consult the dealer.
- The receiver does not contain any user-serviceable parts. All maintenance work must be carried
out by qualified personnel.
- If you disconnect the receiver from the mains, make sure to unplug it from the wall socket and
not just from the AC socket at the back of the unit. Children could seriously injure themselves, as
the free end of the cable is still alive.
- Unplug the receiver during lightning storms.
- To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
- The receiver should be placed on a firm surface, and the ventilation openings must not be
covered with items, such as newspapers, table clothes, curtains, etc.
- Do not install the receiver near any heat sources such as radiators, stoves or other apparatus
that produce heat. Protect it from direct sunlight.
- When installing the receiver, ensure there is a gap of approximately 2.5 cm around the receiver
to enable air to circulate freely and prevent overheating.
- Do not place any combustible objects on the receiver (candles, etc.).
- No objects filled with liquids, such as vases, shall be placed on the unit.The receiver shall not be
exposed to dripping or splashing. Should this happen, disconnect your receiver from the mains
and consult your dealer.
- Make sure that children do not place any foreign objects in any of the openings.
- For cleaning, use a soft, damp (not wet) cloth. Never use any abrasive cloth and aerosol cleaners.
Unauthorized recording (and distribution) of copyrighted TV programs in whole or in part, is an
infringement of copyright laws and of international treaties.
Safety instructions
175
ENGLISH
- Leave accessible the mains connector at the back of the unit in case emergency shutdown is
required.
Table of contents
Meaning of symbols
172
9
Unpacking the receiver
173
Quick installation guide
173
198
198
Safety instructions
175
10 Tips
10.1 Using tuners and Hard disk
10.2 Tips and tricks for recording
and playback
1
Introduction
177
11
201
2
2.1
2.2
Product description
Front panel
Rear panel
178
178
179
202
3
Remote control
180
4
Inserting your common interface 181
5
5.1
5.2
Connecting your receiver
182
Connecting to antenna,TV
and VCR/DVD player
182
Connecting to your audio equipment 184
12 Remote control settings
12.1 Modify remote control settings to
match your audio/video equipment
12.2 Change settings of your remote
control for TV,VCR, DVD or Amplifier
12.3 Remote control (TV Mode)
12.4 Remote control (DVD)
12.5 Remote control (VCR)
12.6 Remote control (AMP)
13
Troubleshooting
210
6
First installation
185
14
Technical specifications
212
7
7.1
7.2
7.3
7.4
7.5
General Viewing Functions
Receiver wake up
Channel selection
Channel banner
Channel Lists
Volume & Audio Control
186
186
186
186
187
187
Brand Setup Code list for Philips
5-in-1 universal remote control
214
8
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
Menu
Settings
Media Manager
Program Guide
Personal Planner
Parental Lock
Common Interface
Read messages
Miscellaneous functions
187
188
190
192
193
193
194
195
195
176
Menu Tree
197
199
Advanced Unicable settings
202
203
205
206
207
208
Table of contents
1
Introduction
Welcome to digital television!
The Philips Satellite Video Recorder DSR 7005 allows you to watch and record at the same time
with one device, a wide variety of free-to-air and scrambled channels with the best digital picture
and sound quality.
With this product you can enjoy advanced functions and features including:
• Watch & Record different channels at the same time
• Embedded Hard Disk Drive to store all your favourite programs
• Digital picture and sound quality
• Up to 4000 presets for TV and Radio channels
• Easy installation and use through the well-tested Euphoria User Interface
• Personal channel list and favourite lists
• Electronic Program Guide
This user manual covers the installation of your receiver and the necessary steps to use the
various functions, so you can optimally enjoy every feature.
ENGLISH
Philippe Alcaras, CEO BLC Digital Video DV
Paris, May 2006
Introduction
177
2
Product description
2.1
Front panel
R
Q
WE
T
I
Y
U
1
Standby key . . . . . . . . . . . . . . . . . . . . . . . . . . . . Switch the receiver on or to standby mode
2
P+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Channel +
3
P- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Channel 4
Infra-Red Sensor . . . . . . . . . . . . . . . . . . . . . . Receives signals from the remote control unit
5
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Information about channels and menu navigation
6 & 7 Common Interface slots: see chapter Inserting your common interface
8
“Push to open” . . . . . . . . . . . . . . . . . . . . . . . Press here to open/close the door
178
Product description
Rear panel
O
I
E W
U
R
1
2
3
4
90-260 V, 50-60 Hz (**) . . . . . . . . . . . . . . . . . . . . . . . . .
Optical Digital Audio Output (*) . . . . . . . . . . . . .
SERIAL (*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L/R (*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
6
7
Power Switch (*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TV (*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VCR (*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
LNB Input + Loop Through Output (*) . . . .
9
Digital Audio Output (*) . . . . . . . . . . . . . . . . . . . . . . .
Y
Q
T
Socket used to connect the power cord.
Optical Digital Audio Output
RS232 socket used for serial data transfer
Left/Right analogue audio cinch outputs used to
connect your HiFi/audio receiver system
On/Off
SCART(1) socket used to connect to your TV set
SCART(1) socket used to connect your video
recorder or DVD player/recorder.
Satellite IF input, output for LNB power supply and
LNB switching signals (14/18 V, 22 kHz and DiSEqC)
Digital Audio Output
The label showing the type and serial number is underneath the receiver.
(1) SCART is also called Euroconnector or Peritel.
* Safety Extra Low Voltage
** Hazardous Voltage
Product description
179
ENGLISH
2.2
3
Remote control
Your remote control enables to control not only your receiver, but also 4 additional devices from any
brand! By default, the remote control is pre-programmed for your receiver (DVR mode).To enable
control of other devices, see chapter “Advanced Settings”/“Changing the settings of the remote control”.
Standby
Switch to Stand-by/Wake up
- Open info banner
- Then show extended
programme information
- Then close banner
SELECT
Select remote control mode:
DVR,TV,VCR, DVD or AMP
(for more details refer to
Remote Control Settings)
RED, GREEN,YELLOW,
BLUE
Contextual keys
MENU
Open/Close menu
EXIT
Go back one step in the
menu/Exit
CURSOR KEYS
t/y
Move selection up/down within
menus and lists
u/ i
- Select value for a setting
- Fast rewind and fast forward
OK
- Call up channel lists while
watching digital TV or listening
to the radio
- Select/confirm in menu
Open/close EPG
REC
Instant recording
Stop recording
Stop playing
0-9
Select a channel in digital TV mode
VOLUME
+/Turn the volume of your TV set
up/down
- In playing mode: Pause/Play
recording
- In live TV: Pause/Play live TV
P+/PSelect next/previous channel
HDD
Open/Close Library
FAV
Open/Close favorite lists
P<P
Recall last channel
180
Text
In running mode: open/close
teletext
Option Menu
Subtitle/Audio selection
Mute
Audio mute on your Philips TV
set
PiP
Display/Mode Picture in Picture
Timer
- Set a recording timer
Remote control
4
Inserting your common interface
- To be able to receive scrambled digital channels specific to an operator, you need a common
interface module and a smart card from that operator.
- To avoid incorrect insertion of the common interface module in the slot, make sure you insert
the smart card in the common interface module and insert properly the module in the
corresponding slot (either the first or second slot).
- Insert the smart card into the common interface module as far as it will go.The end of the card
will be visible outside the module.
- Push the common interface module into the slot as far at it will go without forcing.
- New and updated information may be downloaded onto the smart card from time to time.
If your receiver is equipped with a Common Interface module, the technical data relating to the
modules inserted, as well as to any smart cards inserted in these, can be accessed via a “Main
Menu/Common Interface”.You can see information as to which of the two CI slots is currently
fitted with a module. Select the module in respect of which you require additional information.
A display is generated by the CI module itself, and may therefore differ slightly in appearance from
one module to the other.To obtain a full display of the data, a smart card must be inserted in the
module.
Please consult your installer or card provider for the details of the use of your specific card.
Inserting your common interface
181
ENGLISH
Insert the smart card with the chip facing up.
5
Connecting your receiver
There are several ways you can connect and incorporate your digital receiver into your existing
audio/video equipment set up.
-
Before starting to connect:
Unplug all equipment (TV set as well as VCR and/or DVD or DVD+R if required) from the
mains.
Do not connect your digital receiver to mains supply now.
Check your current wiring: you may not need to modify your existing audio/video set up
connections if they already match the connection diagrams below.
Depending on your existing set up, choose the best-suited connection method for incorporating
your digital receiver.
5.1
Connecting to antenna,TV and VCR/DVD player
5.1.1
Connection to the satellite antenna
In order to guarantee watch and record function for all used cases, the followings configurations
are required:
- Dish with dual LNB tuner pointed on the same satellite. Connect like on figure below.While
executing first installation setting, on “Antenna Settings” sub-menu choose “dual” for installation
type.
Lead from your
TV antenna
TV set
Recorder
PHILIPS
IN FROM ANT
EXT 1
OUT TO ANT
EXT 2
SCART
Satellite Receiver
Lead from
satellite dish
with dual LNB
Refer to paragraph "Antenna settings" for a complete description of tuner connection.
182
Connecting your receiver
- Dish with single LNB: in this case you feed only one tuner and limit the recording capabilities of
the DVR.While executing first intallation setting from the “Antenna Settings” sub-menu, choose
“Loop Through 1
2” for intallation type and “Universal” for LNB type.
- Dish with Unicable LNB or Universal LNB with only one output. Connect like on figure below,
by making a loop through between tuner 1 and tuner 2.While executing first installation setting,
on “Antenna Settings” sub-menu choose “Loop Through 1
2” for installation type and
“Unicable” for LNB type.
Lead from your
TV antenna
TV set
Recorder
PHILIPS
IN FROM ANT
EXT 1
OUT TO ANT
EXT 2
SCART
Satellite Receiver
ENGLISH
Lead from
satellite dish
(Unicable or
dual LNB
advised)
Refer to paragraph "Antenna settings" for a complete description of tuner connection.
1. For other “Antenna settings” submenu configuration, LNB type or physical tuner loop
through configuration, it could happen that some of the channels cannot be accessed during
a specific record. Refer to chapter Using tuners and hard disk.
2. Some DECT telephones may impact the signal quality, place receiver and telephone away
from the Digital video recorder
5.1.2
Connection to the TV set
Use the SCART cable supplied to connect your receiver to the TV set.
Connect the VCR SCART socket of your DSR7005 to the SCART socket of your VCR/DVDR with
a SCART cable.
Note: For best DVD/VCR viewing, connect the DVD/VCR SCART EXT 1 directly to the TV
set SCART.
Connecting your receiver
183
5.2
Connecting to your audio equipment
Satellite Receiver
A
B2
B1
AUDIO
Electrical digital input
Optical digital input
Audio equipment
Audio equipment
5.2.1
Analogue
input
R
L
Audio equipment
Analogue connection (A)
Connect the L/R audio output sockets to the relevant L/R audio input sockets of your audio
equipment using a double CINCH cable (not supplied). Consult the user manual of your audio
equipment to choose the proper analogue audio inputs.
5.2.2
Digital connection (B1 or B2)
Your audio device is equipped with an electrical audio input (B1)
Connect the digital audio RCA cinch output socket (“Digital Audio / Coax.”) of your receiver to
the relevant digital audio input socket of your audio equipment using a single CINCH cable (not
supplied).
Your audio device is equipped with an optical audio input (B2)
Connect the optical audio output socket (“Digital Audio / Optical”) of your receiver to the
relevant digital audio input socket of your audio equipment using a single optical cable (not
supplied).
Consult the user manual of your audio equipment to choose the proper digital audio input.
Note:With this connection set up you can control the audio volume up/down and mute only
from your audio equipment.
184
Connecting your receiver
6
installation. Set appropriate values for the
following:
- In dual installation, select tuner 1 or 2
- Select LNB type (Unicable or Universal)
- Satellite
- Primary DiSEqC
- Tuner1 IF
- Channel ID
- Tuner2 IF
- Channel ID
First installation
For fast and successful start-up, check that your
receiver is connected to the wall socket,TV set
and other equipment according to the diagrams
in chapter receiver. Switch on the receiver and
TV set.The welcome screen appears, then the
First installation screen.
1
2
Press the OK button to proceed to the
next page.
On the next page, select a language by
pressing the arrow button uor i
Note: Also observe the information
messages displayed on the screen.They will help
you select the correct settings. Such
information messages will also be displayed
during operation later.
Note: LNB = Low Noise Block Converter;
electronic unit of a satellite receiver system
placed in the focus of the satellite antenna.
6
3
4
5
Now successively make the settings as
appropriate. Select the menu language and
the country.The following general setting
rules apply:
- Arrow buttons uand ichange a setting.
- Arrow buttons t and y move up and
down the list of options.
Then press EXIT button to confirm your
changes and go to the next screen
The values for the current LNB settings
displayed in this window are the factory
defaults.They normally provide you with the
best range of channels. Go to Antenna
Settings chapter for a detailed description
of the antenna parameters and come back
to complete the points below for first
First installation
Confirm this window with EXIT
Note: On most of the cases, Astra 1 and
Hotbird satellites are selected. If you choose
these satellites, the channels are already preinstalled after step 6.The installation is finished.
7
8
If you choose other satellites then Astra 1
and Hotbird, go to Channel Search menu to
start scanning for channels.To access
Satellite Search, select Settings, select User
Preferences, select Channel Search and then
Satellite Search.
Refer to Channel Search chapter for full
description. Press RED key to start scanning.
The scan takes 20 minutes per satellite to
make sure all channels are found.
During the scanning process, the following
information is reported on screen:
- TV and Radio channels detected,
185
ENGLISH
Note: For individual settings of your
satellite system, read the chapter Satellite search
- Satellite and transponder scanned,
- Scan progression
9 When scanning has been successfully
completed, search results are displayed,
10 Press EXIT to save the channels; the
receiver will automatically tune to the first
channel in the list.
If you are using Unicable LNB, refer to chapter
11, Advanced Unicable settings to have
appropriate information.
0014, quickly press numerical buttons 1 and 4
successively. Leading zeros can be left out.
7.2.1
To change channels, use P+/P- or the number
keys of the remote control.
7.2.2
General Viewing
Functions
This section describes the basic functions available
while watching digital TV or listening to digital
radio. For general menu navigation, see Menu.
7.1
Receiver wake up
To wake the receiver up, make sure the power
button on the back panel is switched on to “1”.
Your receiver is in standby. Press
on the
front panel or on the remote control.
Previous Channel Recall
Press P<P to move to the previous channel
you watched in the current channel list.
7.2.3
7
Using P+/P- or number keys
Using the channel list
To view the list of all available channels while
watching digital TV or listening to digital radio,
press either OK or FAV.
To select a channel:
- Scroll up or down to the desired channel.
- The current program is displayed in the
background.
- Press OK to close the list and watch the
selected channel. Press EXIT to exit the list
without changing channel.
Your receiver, as any electronic equipment,
consumes power. In order to reduce power
consumption, please switch your receiver
to standby whenever you are not using it.
For maximum energy saving we
recommend you to switch the button of
the back panel of your receiver in position
“0”.
7.2
Channel selection
You can change channels:
- By pressing the Channel button P+ or P- By pressing the arrow button t or y.
- By pressing the P<P button, you switch
between the two last selected channels.
- By selecting the channel directly via the
channel list.
- By entering the channel number from the
channel list.
Enter the number using the numerical buttons.
If, for instance, the channel is stored as number
186
7.3
Channel banner
Every time you tune to a channel, the channel
banner appears, displaying information on this
channel, including information on the current
program.
The channel banner is displayed for 6 seconds as
per default.This can be adjusted from the Pop-up
Time out item of the User Preferences sub menu.
While watching a channel, you can display the
current channel information at anytime by
pressing
. Press
again to close the
channel banner.
General Viewing Functions
Soundtrack and setting the desired language.
- Press EXIT and confirm by pressing the
green key to save your changes and exit the
screen. Press EXIT and the red key to exit
without saving your changes
Note:While watching live TV, press the
key on the remote control to access directly
the audio and subtitles languages. Available
languages depend on the audio and subtitles
content transmitted.
Channel Lists
While watching digital TV or listening to digital
radio, you can access existing channel lists by
pressing OK. Successively press FAV to toggle
between the favourite lists you created and the
list of all available channels (Main TV list, Main
Radio List, My Favourite,TV FTA,TV Crypted,
Radio FTA, Radio Crypted).
Note:When one of the favourite lists is
activated, you zap only through the channels
this list contains.To create favourite lists, refer
to the Favourite List Manager section
Note: “My favorites” list already includes
the most popular channels
8
Menu
Basic navigation
While watching digital TV or listening to digital
radio:
- Press MENU to display the main menu.
- Press t or y to scroll up or down to the
menu item you want to select.
- Press OK to display the corresponding sub
items.
- Press t or y to move to the desired sub item.
7.5
Volume & Audio Control
Note: Press MENU to exit from the menu
and go back to TV/Radio mode. Press EXIT to
go back one step in the menu.
7.5.1
Volume control and Mute
Changing settings
To decrease or increase the volume, use
.
The volume level is controlled through your TV.
To mute the sound, press .
7.5.2
Audio mode
To access audio settings, select Settings from
the main menu, then select Audio/Video
Settings.
- Scroll to Digital Audio Out and set the
desired value (Stereo or Dolby Digital)
- Press EXIT and confirm by pressing the
green key to save your changes and exit the
screen. Press the red key to exit without
saving your changes
- Select your Audio language by scrolling to
General Viewing Functions
Once you highlighted an adjustable item or sub
item, you can then access the values and make
changes using the u or i key to select an
option or OK and number keys to enter
numerical values.
Note:To open a locked menu item enter
your PIN-Code.
Cancelling/storing changes
Either press MENU to leave the menu system
without saving your changes; or EXIT: a pop-up
screen will appear. Press the green key to save
your changes or the red key to exit without
saving.
187
ENGLISH
7.4
8.1
8.1.1
Settings
User preferences
User preferences is used to:
- Set the Menu language
- Set the Pop-up timeout
- Set the main Soundtrack language
- Set Subtitles main language (or Off)
- Set the default Quick Save List
Your DVR will automatically pick up new
software released from the network and
replace the old software with the new
software. It takes about 30 minutes.
When you do not appreciate this change the
setting into "Notify".
An icon will appear indicating that new
software is availalbe.To read the message
refer to"Read message" chapter 8.7, follow
the instructions and accept or reject the
software donwload.
- Enable Auto upgrades for software download
- CAM message
The default value of the setting is active (on).
It allows you entering the smart card PIN
code when requested and receiving
information from the module. If you
deactivate it (off), all the module messages
are disabled.
Note:While watching live TV, press the
key on the remote control to access directly
the audio and subtitles languages. Available
languages depend on the audio and subtitles
content transmitted.
188
8.1.2
Audio/Video Settings
Select appropriate values for the following:
• TV SCART: CVBS, RGB, or S Video
• VCR SCART: CVBS or S Video
• Aspect ratio: 16:9, 4:3 or 4:3 Letter Box
• Digital Audio Output: Stereo or Dolby
Digital
8.1.3
Time/Date
Select appropriate values for the following:
• Automatic Time Update: ON
(recommended value)
When time or EPG data is not correct, (in
case you use another satellite than
ASTRA) deactivate “Automatic Time
Updates” (OFF).
• Date
• Local Time
• Time Zone (for automatic time updates
and EPG)
Note: Correct values for date, local time and
time zone are essantial to have a perfect behavior
of time, EPG and recording functionalities.
Menu
Example:
Country selected is germany
Menu language selected is Turkish satellite is
TURKSAT
In this case, deactivate Automatic Time Updates
(OFF).
Local Time is German
Time Zone is GMT+2 hours for the summer
time and GMT+1 for winter tim
Antenna Settings
Select appropriate values for the following:
• Installation type:
- Dual if two satellites/2cables or 1 satellite/2
cables, each tuner is then installed separately
- Loopthrough if one satellite/one cable only or
two satellite/one cable (unicable/dual LNB).
o Loopthrough 1
2 if cable from the
satellite is connected to the LNB In of the
Tuner 1. LNB out of the Tuner 1 is then
connected to the LNB In of the Tuner 2 by
means of the short RF cable.
o Loopthrough 2
1 if opposite situation
• Tuner: If you have selected the installation
type “Dual”, the options Tuner 1 and Tuner 2
are displayed.You can now differently define
the characteristics for both Tuner, e.g. adjust
both Tuner to the different satellites.
• LNB Type: Set the LNB type Universal if your
LNB is a standard LNB, Unicable if your LNB
is a Unicable LNB. If Unicable LNB is chosen,
refer to chapter Advanced Unicable settings to
configure the 4 settings:Tuner 1 IF, Channel
ID,Tuner 2 IF, Channel ID.
• Satellite:
- Select the desired satellite: default setting is
ASTRA 19.2° East
- (The lower half of the display will show a bar
graph indicating signal strength, and will also
indicate the signal quality of a TV channel
found at this satellite position.The larger the
signal graph is, the better the signal quality.)
• Primary DiSEqC: If the satellite installation
is equipped for switching by means of DiSEqC
commands, the DiSEqC position of the LNB
can be entered here (up to four LNB’s
designated A, B, C or D).
Menu
8.1.5
Channel Search
• Satellite Search
Use the automatic program search to allow
your receiver to search through an entire
satellite range for new programs. In this case,
the entire frequency range of the satellite is
searched.The following information must be
configured:
- Satellite: Select the satellite position to be
searched. Below this you will see a display of
the current signal strength.
- Initiate the automatic program search by
pressing the red function key.
- Newly found programs will be displayed one
after the other on the following page.This
can take a couple of minutes.
- When the result of the program search will
be displayed, save the newly found programs
with the Green key, or discard them by
pressing the Red key.
Note:The search procedure can be
terminated at any time by pressing the “EXIT”
key.The response may not be immediate.
• Channel Search
New digital satellite TV and radio programs are
added almost on a daily basis, or existing
programs change their frequency. If you wish to
receive these programs, you must allocate them
to specific program slots in the program list,
and store them in memory.The program search
function is designed to assist you in this activity,
and there are various types of program search
available.
Several procedures can be followed in order to
initiate a program search. Press the “Menu” key
189
ENGLISH
8.1.4
to call up the Main Menu, then using the
directional keys select the sub-menu
“Installation Setup”, followed by “Channel
Search”, confirming your selection in each case
by pressing the “OK/MENU” key. Here you
can decide between the two options available,
as described below.
8.1.7
8.1.6
Default Settings
• Factory settings is used to restore the
receiver factory configuration
Press the green key when prompted to
confirm (or red key to cancel). If you reset
your receiver to factory settings, you lose all
data and information previously stored, and
must restart first installation
• Channels only
Press the green key when prompted to
confirm (or red key to cancel). Resetting only
the channels by a new satellite scan; previously
defined/modified settings remain unchanged.
• Format Hard Drive
Formatting has to be used in specific cases
only (e.g. defective function)
Press the green key when prompted to
confirm (or red key to cancel)
Warning: All stored data (recorded movies of
the library etc.) will get lost during formatting.
Confirm the desired function with the red
(No) or the green (Yes) key.
When returning to factory default, the hard
disk will be formatted and all data
(recorded programs) will be lost, including
your current PIN code setting.
190
System Info
• Product Info: is used to display the receiver
reference, software and hardware ID, as well
as Hard Disk Size.
• Software update:
- Press OK to check for new software
availability
- If new software is available:
- Press OK to accept the upgrade.
- Press the green key to store the download or
the red key to abort
- The receiver will restart at the end of the
download.
Note: Automatic software download
Your DVR will automatically pick up new
software released from the network and
replace the old software with the new software.
It takes about 30 minutes.
When you do not appreciate this change the
setting into "Notify".
An icon will appear indicating that new software
is availalbe.To read the message refer to"Read
message" chapter 8.7, follow the instructions
and accept or reject the software donwload.
8.2
Media Manager
The Media Manager allows you to design and
administrate your favourite list and is also the
access to recorded channels, which are archived
here.
8.2.1
Library
The library is used to archive the programs that
have been recorded are stored on the hard disk
of your receiver.
Menu
Note:When navigating in library, if a
recording is displayed in light grey, it means this
recording is in progress. It can already be played
back (watched in time-shift).
Note:To move a recorded program
1
Select a recording from the library, press
the blue key.
If you want to move a block of several files,
select the first block by pressing the green key,
use t and y to highlight the last block, press
Menu
green key to confirm.
2
Press yellow key. A pop-up will appear, to
select the directory where you want to
record it.
3
Press green key to confirm.
8.2.2
Main TV List / Main Radio List
The main TV/Radio List includes factory made
pre-listed, common channels of your country.
Within the main TV List you can change the
channels and/or block them with the parental
lock function (see Parental Lock)
8.2.3
Favourite List Manager
At installation, all the channels found are added
to the main TV list, which is automatically split
in “Main TV”, “Crypted TV”, “FTA TV”, “Main
Radio”, “FTA Radio”, “Crypted Radio” or
“Favourite” lists. From these lists, you may
create favourite lists according to your
preferences.
Favourites lists is used to
• Create, modify and delete lists of favourite
channels
• Lock channels
To create a favourite list:
1 Go to Media Manager sub-menu
2 Select Favourite Lists Manager
The Favourite List Manager will display all active
channel lists (Main List)
3 Use the green key to create a new list of
favourite channels.
A new display window will appear with an onscreen keyboard.
191
ENGLISH
- Press t or y to scroll up or down to the
recording you want to select
- When zapping, a still video of the recorded
sequences is displayed on the right side of the
screen, below is specified the date, hour and
length of each recording.
- Start the desired recording by pressing
(Play)
- Press EXIT to leave the menu or STOP to
stop the recording
- Use
,
, , to forward, rewind, pause
or stop the recording (Repeatedly pressing
the
,
key raises the forwarding /
rewinding speed)
- To delete a recording, select an item from the
library by pressing the red key.
- An overview of the remaining capacity of the
Hard Disk is shown by a bar on the right side
of the library menu screen, the shown
percentage indicates the current occupied
disk space
- To archive a recorded program, set an
archiving timer.
1 Select a recording from the library, press
the blue contextual key.
2 A pop-up will appear, set appropriate values
for the timer.While type is highlighted, press
u or i to select archive type.
3 Press OK. A timer has been created in
Personal Planner and will play back the
recording at timer start.
4 Set your VCR or DVDR to start recording
at the receiver timer start (for more details
on archiving your files, refer to Archiving on
Video Tape or DVD)
4
5
Use the directional keys and contextual
colour keys to enter a name for the list to
be created. Press Exit to save and go back
to the favourite lists
Modify your favourite list as described
below
To modify a favourite list:
- Select a list to modify from the Favourites
lists sub menu.
- Press the OK key to edit it
- Copy channels from the Main List (left) to
the selected list of favourites (right). Select a
channel from the list by highlighting it. Press a
OK, the channel will be copied to the
favourite list on the right
- Press the green key to navigate between the
Main List and the favourites list
- Press the (Stop key) key to lock/unlock a
channel (Parental lock). Refer to Parental Lock
chapter to activate the parental lock function.
- Press the red key to mark a channel for
processing
- Press the yellow function key to move a
channel (once the yellow key) or a group of
channels (twice the yellow key), when the
function is activated, follow then the
instructions appearing in the Information text
field at the bottom of the screen
- Press the green function key to sort the list,
then choose the sorting type, green or blue
or either red to come back to the initial
numerical sorting
- To delete a channel in the favourite list, mark
it with the red key and press the blue key for
deleting
- Press EXIT to exit the screen.You are then
prompted to confirm your changes.
To delete a favourite list:
- Select the list you want to delete from the
Favourites lists sub menu
- Press the red key
- When prompted, press OK to confirm
deletion.
Note:When you activate one of the
favourite lists by pressing FAV while watching
192
digital TV or listening to digital radio, the
receiver only zaps through your favourite
channels.
Press FAV to again toggle between your
favourite lists and the full channel lists.
8.3
Program Guide
The TV/Radio Program Guide (EPG) provides
an overview of available TV and Radio channels,
and programs the broadcasters have scheduled,
starting with the current one.
To view EPG data:
- Press EPG on the remote control when
watching a channel, or select Program Guide
from the main menu.
- Use the blue function key on the remote
control to move 24 hours forward or the
yellow key to move 24 hours backward.
- Highlight the program name for which you
want more detailed information.
- Press
once to get extended information
(program description), and once again to
close it.
- Press OK to start watching the
corresponding channel.
Note: No text or a ‘No information yet”
message is displayed if the selected channel
does not provide EPG data. It may take a few
seconds before data can be displayed.
Note:The data presented by the EPG are
retrieved from the network.When using a
common interface module, the data may be
limited to information on the current program
(NOW/NEXT).
Menu
- To set a recording on a program, move to the
program name using the arrow keys and
press REC.
- To set a reminder on a program, move to the
program name using the arrow keys and
press OK.
8.4.2
Modifying a timer
Select a timer in the list and press OK to edit
8.4.3
Deleting a timer
Select a timer in the list and press the red key
to delete it
Note: Spontaneous recordings are possible
at any time by using the record key. By pressing
this key the receiver will start recording the onscreen program. Press Stop to stop recording.
Tip:While a recording icon is displayed in the
top of the screen, you can hide/unhide it by
pressing the blue key; this will not affect your
recording.
8.5
8.4
Personal Planner
8.4.1
Create a timer:
Parental Lock
The receiver provides an active parental control
(lock) function, allowing you to block specific
menu settings or individual channels by means
of a four-digit security code (default PIN code).
Select appropriate values for the following:
• Type of recording:You can choose
between:
o Record: the program is directly set for
recording
o Reminder: at the beginning of the
program a pop up appears asking
confirmation to switch channel
o Archive: Plays back the recording to
archive it on an external device (for more
details refer to Archiving recordings on
Video Tape or DVD)
• Channel ID
• Name
• Starting date
• Starting time
• Final date
• Final time
• Cycle (Single, Daily or Weekly)
Note: Use the arrow buttons u, i or
OK to change and edit a setting. Use the
arrows keys y and t to move up and down in
the options list.
Menu
ENGLISH
Press the blue function key “new entry”.
8.5.1
1
2
3
4
5
6
Set Access Rights Level
Go to the sub-menu Parental Lock
Enter the four- digit PIN code
Select Set Access Rights Level and confirm
by pressing the OK key
If the number is not accepted, repeat this step
When Pin code is accepted, Set Access
Rights Level sub-menu opens
Select what you want to lock with the Pin code
193
1
2
3
Go to the display Parental lock
Select the line Set Access Right Level and
enter the PIN code.
Select the line Access All to disable the
parental lock.
With immediate effect, no PIN code will be
required for any of the functions of the
receiver.
If you forgot your PIN: Go to the
Troubleshooting section
8.5.2
1
2
3
4
Changing the PIN code
Go to the sub-menu Parental Lock
Enter current PIN Code
Enter new PIN Code
Follow instructions displayed on screen
Note: If you forgot your password, refer to
Troubleshooting.
8.5.3
1
2
3
4
5
6
7
8
Blocking individual channels
Make sure PIN code has been activated.The
default setting provides unrestricted access
to all TV and radio channels.
Press the EXIT key to exit from the display
Parental control.
In the Main Menu. Select the entry Main
TV/Radio List
As the parental lock function is active, enter
the PIN code
Select the channel list in which you wish to
block individual channels.
Use the directional keys to go to the relevant
channel in the main list (left), then block access
to this channel by pressing (Stop key)
For as long as the parental lock is active,
this channel can only be viewed if the PIN is
entered immediately after the channel has
been selected.
To deactivate the lock on one channel, go
back to the channel list manager, press the
(Stop key) and enter your password
8.5.4
Deactivate PIN Code
General deactivation of parental lock restrictions:
In order to completely remove the restrictions
on individual channels and on-screen displays,
194
8.6
Common Interface
If your receiver is equipped with a Common
Interface module, the technical data relating to the
modules inserted and to any smart cards inserted
in these, can be accessed via a specific display.
To view this information:
1 Call up in the Main Menu “Common
Interface”
2 You can view the information as to which of
the two CI slots is currently fitted with a
module
3 Use the directional keys to select the
module in respect of which you require
additional information, and confirm by
pressing the “OK” key.
4 A display is generated by the CI module
itself (and therefore may differ slightly in
appearance from one module to the other)
5 In order to obtain a full display of the data,
a smart card must be inserted in the
module.
6 Please consult your installer or card
provider for the details of the use of your
specific card. Some common interface cards
may not work properly. Use certified cards
only.
Note: Once you have changed your Smart
Card PIN Code, keep it secret to prevent
others from using it. If you forget or lose your
Pin Code, call your customer service adviser.
Note: After doing a record on a crypted
channel, let periodically the box into stand-by
with the CI+ CA module plugged.
Menu
2
3
4
5
Read messages
A message is sent to your receiver when new
software is available. Press OK to read messages.
New software improves the functionality of
your DVR. Network changes can be the reason
why new software has to be downloaded.
If new software is available:
1 Press OK to accept the upgrade.
2 Press the green key to store the download
or the red key to abort
3 The receiver will restart at the end of the
download.
If no new software is available, press the green
key to go back to the Menu screen.
Note: After a succesfull software update, it
is recommended to make a factory defaults.
To activate this feature, go to the menu Default
Settings (refer to chapter Default Settings).
8.8
Miscellaneous functions
8.8.1
Timers
Setting a timer while watching digital TV
or listening to digital radio
- Press
to open the personal planner (for
more details, refer to paragraph Personal
Planner)
- Or press
- Select the desired program by using the ui
or ty keys
- Press REC, the timer is added to Personal
Planner
Deleting an active timer
A timer is active. Recording is signalled on the
front display of the box by “REC” followed by
the number of programs currently being
recorded.
To delete the active timer:
- If your receiver is in standby, press P+, P-, or
any number key of the remote control to
wake up the box.
- Press (Stop), a pop-up screen appears,
select the recording timer you want to delete
and press OK to delete the timer or EXIT
to cancel.
Setting a timer from the Program Guide
1 Select Program Guide from the main menu,
or press EPG on the remote control.
Menu
195
ENGLISH
8.7
Move to the desired channel using the
arrow keys.
Press REC to set a recording timer, the event
will be marked in red; press OK on the
selected program to set a reminder, the timer
icon will appear next to the program title.
Enter your PIN code if necessary, and then
set the timer as appropriate. By default, the
settings correspond to the selected channel.
Pressing REC again cancels the record
8.8.2
Recordings with the Time Shift
Buffer
- Watch, stop and rewind a program during the
recording
- To watch the recorded program, you do not
have to wait until the recording is finished
- Pause live TV by pressing
- Press the
key to continue watch the
program from where you paused it
- Use u and ikeys to fast rewind/forward
- Watch a program and record another one at
the same time
- Watch programs already archived on you
hard disk and record at the same time.
- Record a program preset for recording out
of you Personal Planner, record, a second
program at Time Shift and watching a third
from the same Transponder.
- When the Time Shift Buffer is full, the oldest
recording is deleted automatically, to make
space for a new recording.
- The recordings on your hard disk remain as
long as you do not delete them.
8.8.3
PiP - Picture in Picture
A feature of the Twin receiver is the possibility
to view with two independent receiving spots a
Picture in Picture-function.
- Activate it by pressing
on the remote
control
- An additional small screen appears on the TV
screen with the same program.
- When zapping to another channel the
previous channel remains on the small screen.
- An additional pressing of the
closes the
small screen.
Note:When you use the receiver with the
Common Interface, the feature Picture in
Picture does not work (the Common Interface
module can only decrypt one stream at the
same time).
8.8.4
Archiving recordings on Video
Tape or DVD
Archiving manually
- Playback manually the previously recorded
program you want to archive
- At the same time, press the record button of
the DVDR (or VCR)
- At the end of the program, stop the
recording from the DVDR (or VCR)
- Exit the playback mode to return to live TV
Archiving automatically
- From My Personal Planner or from the HDD
library, program your recording with an
“Archive Timer” to start automatically to the
time you wish to proceed the archive
- Set a recording timer from the DVDR (or
VCR)
- It is important that the date/time are well
synchronized between the devices (to insure
that all the played-back program is recorded,
set the timer to start few minutes before and
to stop few minutes after)
- Automatically, at the exact time set previously
in the timers the DSR7005 will playback the
selected recorded program and the DVDR
(or VCR) will start recording
- The two devices will automatically stop
according to the time set in each of the
timers.
Note: No operation can be performed on
the receiver when an archiving is ongoing.
196
Menu
Menu Tree
Settings
Media Manager
User Preferences
Menu Language
Pop-Up time out
Soundtrack
Subtitles
Quick Save List
Auto Upgrades
CAM message
Audio/Video Settings
TV SCART
VCR SCART
Aspect Ratio
Digital Audio Out
Time/Date
Automatic Time Updates
Date
Local Time
Time Zone
Antenna Settings
Installation Type
Tuner
LNB Type
Satellite
Primary DiSEqC
Secondary DiSEqC
Channel Search
Satellite Search
Advanced Channel Search
Default Settings
Factory Defaults
Channels only
Format Hard Drive
System Information
Product Information
Software update
ENGLISH
9
Library
Main TV List
Main Radio List
Favourite Lists Manager
Program Guide
Personal Planner
Parental Lock
Set Access Rights Level
Access All
Lock System Settings
Lock System Settings + Channels
Change Pin Code
Common Interface
Common Interface 1
Common Interface 2
Read messages
Menu Tree
197
10 Tips
10.1
Using tuners and Hard disk
A LNB is used to translate the satellite signal into channels.
Every LNB can be compared to a 6 lane highway that represents 10 to 20 channels per lane.
The product you have purchased has two tuners, which can be represented by two cars driving on
the highway.
In the classical satellite installation there is one LNB, feeding 2 tuners on your DVR via the small
cable on the back (‘loop-through’).
In this case you can only see and record channels from one of the lanes at the same time (you can
watch one channel and look at another channel when they are in the same lane).The two tuners
cannot show/record channels from two different lanes.
Action
Watch 1 channel & record another channel
Watch 1 channel & record 2 different channels (two of the 3 need to be in the same
‘polarisation’/’lane of the highway’)
Time shift 1 channel & record another
Time shift 1 channel & record 2 different channels (two of the 3 need to be in the same
‘polarisation’/’lane of the highway’)
When you add a second LNB or replace the LNB with a Unicable LNB, you add another 6 lane
highway, one for each car. Now more combinations are possible.
Action
Watch 1 channel & record another channel
Watch 1 channel & record 2 different channels
Watch 1 channel & record 2 different channels and a 3rd one in the same lane
Time shift 1 channel & record another
Time shift 1 channel & record 2 different channels
Time shift 1 channel & record 2 different channels and a 3rd one in the same lane
For more information on the combinations and variations of different LNBs in the market, consult
your Satellite installer/specialist who can show all possibilities to feed your DVR.
198
Tips
10.2
Tips and tricks for recording and playback
This DVR has been designed according to our Sense & simplicity guidelines. For this reason we
have many features in the box that make your life easier.
Hereunder you can find a summary of the most important ones:
Recording (maximum 80 hrs)
There are multiple ways to record or to program a recording. In case of overlaps or conflicts the
product will warn you.
When you switch on your TV
Go to EPG/Electronic Program Guide pressing
In this menu you have an overview of ongoing programs or program to come.
You can navigate in the different programs.The selected program becomes highlighted, then press
REC to record it.
Make recordings weekly/daily
In the Timer menu
you can add a new recording, and give it the name you want.
Recording via the Zapping banner
The banner gives information on future programs.You can see what is the next program pressing
the
button and scroll to the right using the cursor i. If you want to record it, press REC.
Watch a recording
In a recording, it is easy to select the accurate sequence you want to see:
You can jump to Position Time pressing the yellow button.
You can forward to 1-9 minutes pressing the 1-9 buttons.
You can go backward minute per minute pressing the y button
You can go forward minute per minute pressing the t button
Use
to go fast forward,
fast backward 2,8,16,32 times
Press
a little longer to go into “slow motion”
Time shift
Time shift is the classical application in a DVR. It will record the program you are watching as soon
as you press the
. If you have to stop watching your TV for a short while, when you come back
you can continue to watch the program by pressing
without losing a minute of your program.
Now you are in playback mode.
Tip
If you quit watching the channel recorded in Time Shift, you will lose the recording! An alternative
is to press REC and start to watch the program from the library while the recording is continuing.
Tips
199
ENGLISH
Tip
1 All recordings will be added to the “Timers” list.You can go in this list to change the recording
to make it become a weekly or daily recording.Thanks to this option you do not have to enter
all data manually.
2 When you do not want to see the recording indicator on screen: press the blue button
General (satellite only)
1 In case of “macroblocks” or bad reception (parabol icon with strikethrough) you can see the
quality and strength of the signal in the menu Antenna settings.The minimum should be 50-70%
to be able to receive all channels in good quality.This icon will also appear when you are
recording and are therefore limited to the group of channels in the same “road”/multiplex. See
chapter 10.
This additional information is about the signal quality
- Press OK to go into the channel list.
- Press blue key to display the technical information on the current service.
- Write down the frequency, polarisation and symbol rate.
Then Press the MENU button and select Settings, Channel Search,Advanced Channel Search
- Enter the data you have written down.
Now you see the quality and strenght of the service.
When the displayed values are under 50-70% you need to improve your installation
(See troubleshooting) or contact your installer.
2 The more “tuner inputs” you have, the better you will enjoy the DVR.We advise you to use a
UNICABLE LNB or a Twin LNB (in this case you need 2 cables from the dish to the product)
for more freedom in recording and watching different channels at the same time.
200
Tips
11 Advanced Unicable settings
In case you have installed a Unicable LNB, the 2 tuners of the DVD can process the signal
independently.You can watch and record 2 different channels, no matter which polarization is set.
Connect your receiver as described below:
To another
Unicable Satellite
Decoder if any
Lead from
satellite dish
with dual LNB
DVR
Second Unicable
Satellite Decoder
Then, configure the menu “Antenna settings” by choosing the option Unicable in LNB type.
Connect first the DVR to the dish. And then, connect all other satellite Unicable decoder if any.
Press blue button and wait around 20 seconds for auto detection.
ENGLISH
Now the 4 following items become available:Tuner 1 IF, channel ID and Tuner 2 IF, channel ID.
Recommended values are:
Channel ID for Tuner 1 is 0 and channel ID for Tuner 2 is 1.
Select the frequency to 1680 Mhz for Tuner 1 IF, by using u and i, which corresponds to the
channel ID value mentioned above.
Select the frequency to 1420 Mhz for Tuner 2 IF, by using u and i, which corresponds to the
channel ID value mentioned above.
- If signal strength and quality are adequate then press EXIT to save and proceed.
- If not, check that each channel ID has a unique value (for each decoder).
In case Unicable is not detected refer to Troubleshooting.
Advanced Unicable settings
201
12 Remote control settings
This chapter describes how to use your remote control for multiple devices.
12.1
Modify remote control settings to match your audio/video equipment
Prior to using your remote control, check or set the following:
- Select the device you want to control (Mode selection)
- Volume and mute control assignment
- Brand setting for your TV,VCR, DVD and Amplifier
12.1.1 Mode selection
Your 5-in-1 remote control can be used to control most of your audio/video equipment through
various modes:
- DVR mode for the control of your digital receiver
- TV mode for the control of your brand TV set
- VCR mode for the control of your brand VCR
- DVD mode for the control of your brand DVD or DVD Recorder
- AMP mode for the control of your brand audio tuner/amplifier.
• Press SELECT once to check which mode is active.
• To change the mode, press repeatedly SELECT until the desired mode is signalled by the
corresponding indicator.
• The mode sequence is DVR
TV
VCR
DVD
AMP.
12.1.2 Volume and mute control assignment
Default volume and mute control assignment
- For each mode, you can select the device of your audio/video set-up that will be assigned to
control volume and mute.
- When in DVR mode, the volume functions ( +, - and keys) can be controlled through
your TV set, amplifier, or digital receiver. By default, volume control is performed through the
DVR set.
- When in TV,VCR or DVD mode, the volume functions ( +, - and keys) can be controlled
through your TV set or amplifier. By default, volume control is performed through the TV set
whose brand setting is Philips.
- When in AMP mode, the volume functions ( +, - and
keys) can be controlled through
your amplifier only whose brand setting is Philips.
Changing the volume and mute control assignment
The settings below assume you start from default settings.
• Your Digital Receiver (DVR),TV,VCR or DVD audio outputs are “all” connected to your amplifier.
We advice you to assign the volume control to your amplifier for all modes (DVR,TV,VCR, and
DVD).To do so:
- Press repeatedly SELECT to select the AMP mode.
202
Remote control settings
- Press simultaneously keys 1 and 3 until the AMP indicator turns on then release these keys.
- Enter code 993.The indicator surrounding the key blinks once after each entry.
- Press the key.The indicator surrounding the key blinks twice.
From now on, whatever mode you are in, the AMP indicator turns on each time you press one of
the +, - or key.When controlling the volume make sure the source selector of your
amplifier is properly set (refer to your amplifier user manual for source selection).
• Your TV set is only fitted with SCART connectors
We advice you to assign volume control to your digital receiver for the DVR mode.To do so:
- Press repeatedly SELECT to select the DVR mode.
- Press simultaneously keys 1 and 3 until the DVR indicator turns on then release the keys.
- Enter code 993.The indicator surrounding the key blinks once after each digit entry.
- Press the - key.The indicator surrounding the key blinks twice.
• You have made several setting changes and you want to restore the default volume control
assignment settings (see table in chapter 10.2)
Default volume control assignment means:
- in TV mode, control is performed through your Philips brand TV set
- in VCR mode, control is performed through your Philips brand TV set
- in DVD mode, control is performed through your Philips brand TV set
- in AMP mode, control is performed through your Philips brand amplifier only.
12.2
key blinks twice then
Change settings of your remote control for TV,VCR, DVD or Amplifier
By default at first power up or at first installation, your remote control is preset to control your
Digital Receiver as well as most Philips branded audio/video devices.
If you have other brands of devices, or if the presets do not enable you to control your Philips
device, please follow the procedure below:
1
2
3
4
Choose one brand code, made of 4 digits, from the list at the end of this manual. (If several
codes are possible, go through this procedure with the first code and try your remote control.
If you are not successful, repeat the procedure with the second code, and so on)
Press repeatedly the SELECT key to choose the mode corresponding to the type of device you
want to set up (TV,VCR, DVD or Amp/Tuner).
Press digits 1 and 3 simultaneously until the indicator surrounding the key blinks twice then
release these keys.
Enter the 4 digit code corresponding to the device brand you have chosen.The indicator
surrounding the key blinks once after each one of the first three entries.The indicator
surrounding the key blinks twice after the fourth entry.
Note: If an invalid code has been entered, the indicator surrounding the
only. Restart from step 1.
Remote control settings
key blinks once
203
ENGLISH
To return to default settings:
- Press simultaneously keys 1 and 3 until the indicator surrounding the
release these keys.
- Enter code 981.The indicator surrounding the key blinks twice.
We advise you to fill in the table 1 below to remind your personal remote control settings.This
will be helpful the day you have to replace the remote control batteries.
Default setting
M
O
Brand
Code
Volume control
performed
through
TV set
Philips
0556
TV
Video rec.
Philips
0081
TV
DVD
Philips
0539
TV
Amp.
Philips
1715
AMP
DVR
DVR 1
Your personal setting
Brand
Code
Volume control
performed
through
D
E
TV
DVR (1 or 2)
Table 1
Note: If the battery change takes more than 1 minute the remote control may return to the
Philips default settings.Therefore you have to proceed with a new setting of your remote control
with the help of the table above for your non-Philips branded devices.
Disclaimer: All manufacturers are concerned about the constant improvement of their
products. Although your remote control is compatible with most of the equipment of the following
list, Philips cannot guarantee its operation with the complete range of products on the market
204
Remote control settings
Remote control (TV Mode)
Standby
Power On/Off, Standby
SELECT
Select remote control mode:
DVR,TV,VCR, DVD or AMP
(for more details refer to
Remote Control Settings)
RED, GREEN,YELLOW,
BLUE
Contextual keys
REC
Instant recording
MENU
Open/Close menu
EXIT
Exit/Menu off
CURSOR KEYS
t/y
Move selection up/down within
menus and lists
u/ i
Move selection left/right within
menus and lists
OK
OK/Select, confirm in menu
VOLUME
+/Turn the volume up/down
P+/PSelect next/previous channel
0-9
Select a channel in digital TV mode
HDD
Audio options
FAV
Movie expand/TV format
Text
Open/close teletext
Option Menu
Audio track select
Mute
Audio mute
TV/AV, AV, Ext1, Input
Remote control settings
205
ENGLISH
12.3
12.4
Remote control (DVD)
Standby
Power On/Off, Standby
OSD Display
SELECT
Select remote control mode:
DVR,TV,VCR, DVD or AMP
(for more details refer to
Remote Control Settings)
RED
Fast Rewind
GREEN
Pause
YELLOW
Play
BLUE
Fast Forward
MENU
Open/Close menu
CURSOR KEYS
t/y
Move selection up/down within
menus and lists
u/ i
Move selection left/right within
menus and lists
OK
OK/Select, confirm in menu
REC
Instant recording
Stop recording
Stop playing
VOLUME
+/Turn the volume of your Philips
TV set up/down
0-9
Digit 1 to 9, 0
Pause/Play live TV
P+
Skip forward, next track
PSkip reverse, previous track
Text
In running mode: open/close
teletext
Mute
Audio mute on your Philips TV
set
Library/HDD
Disc Menu
FAV
Punch to TV: Movie expand/TV
format
206
Input select (TV/DVD)
Remote control settings
12.5
Remote control (VCR)
Standby
Power On/Off, Standby
SELECT
Select remote control mode:
DVR,TV,VCR, DVD or AMP
(for more details refer to
Remote Control Settings)
RED
Fast Rewind
GREEN
Pause
YELLOW
Play
BLUE
Fast Forward
CURSOR KEYS
/
Fast Rewind/Fast Forward
Stop recording
Stop playing
REC
Instant recording
Pause/Play
P+/PSelect next/previous channel
FAV
Punch to TV: Movie expand/TV
format
Remote control settings
ENGLISH
VOLUME
+/Turn the volume of your Philips
TV set up/down
0-9
Digit 1 to 9, 0
/
- Subtitle/Audio selection
- Audio track select
Mute
Audio mute on your Philips TV
set
Input select (TV/VCR)
207
12.6
Remote control (AMP) (note that AMP stands for Audio receiver)
Standby
Power On/Off, Standby
SELECT
Select remote control mode:
DVR,TV,VCR, DVD or AMP
(for more details refer to
Remote Control Settings)
RED
Fast Rewind
GREEN
Pause
YELLOW
Play
BLUE
Fast Forward
VOLUME
+/Volume up/down
P+/PChannel up/down
Preset up/down
FAV
Punch to TV: Movie expand/TV
format
CURSOR KEYS
t/y
Preset up/down
u/ i
Tuning up/down
0-9
Digit 1 to 9, 0
Option Menu
Subtitle/Audio selection
Mute
Mute AMP
AMP source select
208
Remote control settings
209
ENGLISH
13 Troubleshooting
Be aware that new software may change the functionality of your receiver.
Should you experience any difficulties with the operation of your receiver, please consult the
relevant section of this manual, including this section. If the problem cannot be solved, call your
customer service adviser.
Problem
Device does not start
Possible cause
Action
Short-circuit in the antenna cable
Check antenna cable
No mains voltage
Check connector cable and pluggable
power supply
Verify that the button on the back of
your receiver is switched to “1”
No picture, no sound
No mains voltage
Check connector cable and pluggable
power supply
No channel list or incorrect channel
list
Carry out automatic channel scan
Short-circuit in the antenna cable
Switch device off, eliminate shortcircuit, switch device on
Defective or missing cable connection
Check all cable connections
Satellite antenna badly adjusted
Readjust satellite antenna
Lost connection, or cable too long
Check connection, shorten cable
length
Satellite dish too small
Use larger satellite dish
SCART plug not completely
connected
Check SCART connection
Satellite antenna badly adjusted
Readjust satellite antenna
Channel is broadcasted by means
of other parameters
Carry out automatic scan mode
Satellite antenna badly adjusted
Readjust satellite antenna
Channel is broadcasted by means
of other parameters
Carry out automatic scan mode
SCART plug not completely
connected
Check SCART connection
Picture available, no sound
You have selected Dolby Digital for
the sound reproduction, but you have
not connected a respective device
Set a different audio output format via
Settings
No reception of channels that could
be received before
Channel is no longer broadcasted
Refer to channel search chapter for a
scanning to update the channel
parameters.
Missing channels during installation
Disturbance by DECT telephone
Increase distance between device and
telephone
Satellite antenna badly adjusted
Readjust satellite antenna
No picture or bad picture
Sound available, no picture
210
Troubleshooting
RC unit does not work
Possible cause
Obstacle between RC unit and
receiver
Device is not switched on
Batteries are empty
Action
Eliminate obstacle
Switch on device
Insert new batteries into RC unit
Several channels are not received
from time to time
These channels are not broadcasted 24 hours a day and sometimes are not
available.This is not a fault.
Bad picture quality
Incorrect TV SCART output signal
Forgotten PIN code
Set other TV output signal, see
Paragraph Audio/Video Settings
Press in this order: Red, Green, Blue,
Yellow keys in the Parental Lock menu.
The PIN code value will reset to 1111.
The displayed time differs from the
current program
Incorrect time settings
Check the settings at Installation Time/
Date, especially after having switched
to summer time or winter time
Encoded programs are not received
CI-CA module not or incorrectly
inserted
Smart card not or incorrectly inserted
into CI-CA module
CI-CA module and smart card belong
to different decoding systems
Check the CI-CA module
Check the smart card
Switch to the respective required type
of encoding
Verify that the CAM message item
displayed from the menu User
preferences is activated
Record cannot be set
Two many recordings are
programmed
Recording conflict
Check the personnal Planner for
conflicting recording timers
Unicable LNB is not detected
Cables not correctly connected
Check connections including Unicable
LNB
Choose a unique value of channel ID
by changing the frequency value for
each Tuner IF
Check that those devices are Unicable
compatible
Conflict between Unicable channels
ID
Devices such as amplifier, switch,
DiSEqC are causing interferences
Cannot watch or access to channel
while recording another channel
Dual LNB or Unicable LNB
configuration is not used
Install Unicable or Dual LNB. For
more explanation refer to chapter 10,
Using tuners and Hard disk
Temperature warning pop-up appears
Ventilation is not optimal
For correct behaviour, put the
receiver in standby mode.The
ventilator shall not be clog
Cannot watch recorded program of a
scrambled channel
CA subscription right could be
expired
With the CI-CA module plugged, let
periodically the box in stand-by mode
The following message on
alphanumerical display on the
receiver: “CRC error”.
Your DSR7005 is blocked and it needs Re-boot your receiver by taking out the
to be updated.
power connector.Then, while you press
the 'Standby' button on the receiver
plug the power connector at the same
time.As soon as you see on the TV
screen: 'OTA x%' you no longer press
the 'Standby' button.The receiver will
download new software if available on
the Astra satellite in 10 minutes, once it
has downloaded the software it will reboot and start up in virgin mode.
If you have tried all of the actions suggested above and could not solve the problem, contact your
customer service adviser.
Troubleshooting
211
ENGLISH
Problem
14 Technical specifications
This product is in conformity with European Directives 95/47/EC and 2002/21/EC.
Satellite Front-Ends
•
Quantity: 2
•
LNB IF input Connector: 2 X F-Type, Female
•
Loop Through Output Connector: 2 X F-Type, Female
•
Input Frequency range: 950-2150 MHz
•
Input Impedance: 75 ø
•
Input signal level: -65 dBm ~ -25 dBm
•
Demodulation type: QPSK
•
Symbol Rate: 2 ~ 45 Mbaud
•
Supported FEC: Inner code rate 1/2, 2/3, 3/4, 5/6, 7/8
Outer code RS (204)
•
LNB Power (X2): 12.5~14.5V (for 14V), 16.4~18.6V (for 18V)
•
Current: 400mA max., Overload protection
•
LNB Control (X2): Frequency: 22 +/-4 KHz, Amplitude
0.9 +/-0.1 V
•
DiSEqCTM Control: DiSEqCTM 1.0, 1.1, 2.0, Unicable
System
•
CPU + MPEG2 decoder / Clock: STi5514/ 166Mhz
32-bit RISC
•
Transport: 2 X DVB De-multiplexer
•
Flash memory: 4 MB
•
System memory: 16 MB
•
EEPROM: 8 K
CI
•
•
•
Slots (Common Interface)
Common Interface type: Dual, PCMCIA, 5V, 16-bit
Common Interface Chip: ALTERA ACEX1K10
Common Interface support: DVB-CI standard (EN-50221)
AV Decoder
•
Video decoding capability: MPEG-1 ISO/IEC 11172-2 and
MPEG-2 MP@ML
•
Video resolution: 720 x 576 (Pal)
•
Aspect ratio: 4:3 and 16:9, Automatic adjustment for 16:9
TV sets, Letter Box supported
•
Audio decoding capability: MPEG-1, MPEG-2, audio layers
1&2
•
Audio sampling frequency: 16 kHz, 22.0516 kHz, 24 kHz,
32 kHz, 44.1 kHz, 44 kHz, 48 kHz, 88.2 kHz, 96kHz
•
Digital Audio: Dolby Digital 5.1
•
Digital Audio SPDIF Output format: IEC-60958 for PCM
data
•
AV Memory SDRAM: 8 MB
Serial Port
•
RS232C:Transfer rate 115,200 bps
Hard Disk Drive
•
Capacity: 80 / 160 GB
•
Interface: Ultra ATA / 100MHz
•
Speed: 5400 rpm
Software Upgrade
•
Download through RS-232 port
•
OTA Download
Rear panel interface
•
Front-End: LNB IF input connector: 2 X F-Type, Female
•
Front-End: Loop through Output connector: 2 X F-Type,
Female
•
TV SCART connector: CVBS(output), RGB (output), L&R
Audio (output), SVHS (output)
•
VCR SCART connector: CVBS (input & output), RGB
(input), L&R Audio (input & output), SVHS (output)
•
Digital Audio SPDIF: 1 X Coaxial, 1 X Optical
•
CINCH (RCA): Audio - L & R
•
Serial port: RS-232C (Female, DB-9)
Front Panel
•
3 Keypads
•
Display: 10-digit VFD
•
1 LED indicator
•
1 IR Sensor
•
2 CI slots
Power requirements
•
Mains input voltage: 90-260 VAC~
•
Mains input frequency: 50-60 Hz
•
Power consumption: Normal operation: 22W
•
Standby mode: 16W
•
Max.: 60W
Physical specification
•
Size (W X D X H), mm: 380 X 250 X 60
•
Operating temperature: (+5) ~ (+40) oC
•
Storage temperature: (-20) ~ (+60) oC
Accessories
•
Remote Control Unit: : 5-in-1 Universal Remote Control
•
Battery x 2
•
User’s manual: English, German,Turkish, Dutch
•
A/V Cable: 1 SCART cable
This product complies with
the following European
Directives:
- 73/23/EEC
- 93/68/EEC
- 89/336/EEC
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories.
212
Technical specifications
213
ENGLISH
Marken-Codes für die Einstellung der 5-in-1
Philips-Universal-Fernbedienung
Codelijst voor het instellen van de Philips 5 in 1 universele
afstandsbediening voor appartuur van andere merken
Philips 5’i bir arada evrensel uzaktan kumanda için
Marka Ayar Kodu listesi
Коды аппаратуры для универсального ПДУ Philips
«5 в 1»
Brand Setup Code list for Philips 5-in-1 universal remote
control
###### Setup Code For All Audio
Amplifiers (A) ######
###### Setup Code For All Audio
Amp/Tuners (R) ######
Awa
Bush
Curtis Mathes
Goodmans
Lexia
Limit
MaXmann Electronics
Micro Lab
Minowa
Mustek
Optimus
Pioneer
RCA
Redstar
Reoc
Roadstar
Sansui
Schneider
Sony
Synn
TCM
Teac
Telefunken
Tevion
Thomson
Yamaha
AEG
Aiwa
214
1301
1301
0327
1301, 1617
1301
1408
1357
1357
1156
1617
0327
0327
0327
1408
1408
1301
1357, 1408
1156
0716
1408
1156
1301
1357
1156
1156
0381
Akai
Alco
All-Tel
Amstrad
Anam
Anam National
Apex
Apex Digital
ASCOMTEC
Audiosonic
Audiovox
Audioworld
Bang & Olufsen
Baseline
Basic Line
Belson
Binatone
Blue Sky
Bose
Bush
Cambridge Audio
Carver
CCE
Centrex
1417
0148, 1296, 1415, 1432,
1668
0142, 0636, 1205, 1247,
1356, 1417
1417
1417
0771
0636, 1636
0636
1284
1284
1416
1416
1417
1417
0826
1581
1581
1416
1416
1417
1382
0824
1674
0148, 0387, 1316
1379
1284
Brand Setup Code list for Philips 5-in-1 universal remote control
Centrum
Classic
Clatronic
Coby
Cosmotron
Criterion
Curtis
Daewoo
Dantax
Denon
Denver
Diamond
Digitrex
DiK
DK Digital
DMTech
Dual
Dynamic Bass
eBench
Elta
Eltax
Ferguson
Fisher
Fonmix
Futronic
Garrard
Go Video
GoldStar
Goodmans
GPX
Grundig
Grunkel
Hanseatic
Harman/Kardon
Harwood
HCM
HE
Hitachi
Hitech
Hoeher
Hyundai
Inkel
Integra
Intersound
JBL
JCPenney
Jensen
JVC
Kawasaki
Kenwood
1247, 1416
1379
0824
1416
0824
1447
0824
1205, 1277, 1320, 1463
0490, 1417
0148, 1131, 1387, 1487
1416
1417
1284
0824
1447
1666
1247, 1417, 1447, 1666
0387
0771, 0824
0771, 0824, 1417
1567
1181
0387, 0824, 1828
1387
1351
0490, 0771
1379
1551
0636, 0771, 0774, 0824,
1205, 1226, 1416, 1417,
1447, 1638
0771
0824, 1371, 1666
0771, 1417
1417
1316, 1331, 1337
0771
1417
1416
1226, 1371, 1581, 1828
0771
1284
1666
0529
1325, 1347
0771
1317
0771
0781
0101, 0491, 1226, 1227,
1401, 1522
1417
0213, 0739, 1054, 1308,
Brand Setup Code list for Philips 5-in-1 universal remote control
Kioto
KLH
Komperna¯
Koss
Lenoxx
Lenoxx Sound
LG
Lifetec
Luxman
LXI
Magnat
Magnavox
Magnum
Marantz
Matsui
MBO
McIntosh
Medion
MEI
Micromaxx
Microstar
Mustek
Mx Onda
NAD
Nakamichi
NEC
New Castle
Nikkai
Nikkei
Nikko
Norcent
Nova
NTDE Geniesom
Onkyo
Optimus
Orient Power
Orion
Palladium
Panasonic
Paramount Pictures
Philco
Philips
Phonotrend
Pioneer
Polk Audio
Prima Electronic
Proline
ProVision
1340, 1596, 1597
0824
1417
0824
0771
1638
1638
1320, 1551
0824
0490
0771
1416, 1666
1296
1638
0771, 1296, 1316
0771, 0774, 0824
1379
1316
0824, 1447
1417
1447
0824
1379
0771, 0824
0347, 0636
1340
1277, 1463
0529
1416
0771
0636
1416
1416
0771
1325, 1347, 1558
0101, 0142, 0148, 0213,
0529, 0771, 0781, 0824,
1050
0771
0490
0824, 1247, 1320, 1371,
1417, 1452
1315, 1335, 1545, 1790
1247
1417
1296, 1316, 1742
0529
0213, 0316, 1050, 1211,
1311, 1486, 1683
1316
0824
0824, 1284, 1417
1416
215
Qisheng
Quelle
Radionette
RadioShack
RCA
Realistic
Recco
Redstar
Roadstar
Rotel
Samsung
Sansui
Sanyo
Schneider
SEG
Sharp
Sharper Image
Sherman
Sherwood
Shinco
Siemens
Silsonic
Silva Schneider
Sony
Soundwave
Starlight
Stereophonics
Sumida
Sunfire
Sylvania
Tandberg
Tangent
TCM
Teac
Technics
Techwood
Telefunken
Tevion
Thomson
Thorn
Tokai
Toshiba
United
216
1417, 1636
1205
1320
0771, 1636
0387, 1050, 1181, 1417,
1486, 1636
0148, 0213, 1636
0824
1416
0774, 0824, 1638
0820
1226, 1308, 1322, 1331,
1451
0636, 1356, 1567
0387, 0771, 1828
0771, 1205, 1226, 1247,
1417
1277, 1581
0213, 0680, 1641
0824, 1487
1351
0529, 0680
1417
0636
0203
1417, 1551
0820, 1185, 1285, 1468,
1481, 1585, 1685, 1785,
1786, 1885
0636
0824
1050
0771
1340
0824
1581
1567
0824
0490, 0636, 0680, 0771,
0774, 0781, 0824, 1205,
1226, 1253, 1298, 1306,
1308, 1417, 1452, 1490,
1506, 1555
0235, 1335, 1336, 1545,
1790
0636
1417
1416, 1452, 1638
1181, 1381
0771
1417
1599
1417
Universum
Venturer
Vestel
Victor
Voxson
Waitec
Watson
Welltech
Wharfedale
Xenius
Yamaha
Yukai
Zenith
0636, 0771, 0781, 0824,
1205, 1247, 1417, 1452,
1463, 1636
1417
1581
0101
1447
1379
0824
0824
1417
1417
0203, 0213, 0739, 1050,
1303, 1358
1379
0771, 1320, 1551
###### Setup Code For All TVs (T)
######
888
A-Mark
A.R. Systems
Accent
Acura
Addison
Admiral
Advantz
Adyson
AEG
Agashi
AGB
Agef
Aiko
Aim
Aiwa
Akai
Akashi
Akiba
Akira
Akura
Alaron
0291, 0439
0036
0379, 0401, 0482, 0583
0036
0036
0135, 0680
0114, 0120, 0190, 0291,
0317, 0390, 0445
0309
0243, 0244
1190
0243, 0244
0543
0114
0036, 0243, 0244, 0291
0482, 0733
0291, 0728, 0732, 1943
0036, 0062, 0087, 0099,
0190, 0205, 0235, 0243,
0244, 0245, 0291, 0388,
0398, 0404, 0439, 0460,
0500, 0507, 0543, 0575,
0583, 0608, 0629, 0633,
0658, 0675, 0741, 0742,
0772, 0839, 1564
0036
0245, 0309, 0482
0445
0036, 0190, 0245, 0291,
0309, 0439, 0695, 0741,
1064
0197, 0243
Brand Setup Code list for Philips 5-in-1 universal remote control
Alba
All-Tel
Alleron
Allorgan
Ambassador
American High
Amplivision
Amstrad
Anam
Anam National
Andersson
Anex
Anglo
Anitech
Ansonic
AOC
Aolinpike
Apex Digital
AR
Arcam
Ardem
Aristocrat
Aristona
ART
ASA
Asberg
Asora
Asuka
Atlantic
Audiosonic
Audioton
Audiovox
Autovox
Awa
Axxent
Baihe
Baile
Baird
0036, 0063, 0100, 0190,
0243, 0245, 0262, 0274,
0286, 0379, 0382, 0398,
0445, 0470, 0514, 0608,
0695, 0741, 1064
0892
0197
0233, 0244
0204
0087
0244, 0397
0036, 0038, 0190, 0204,
0245, 0291, 0389, 0398,
0439, 0460, 0543, 0608,
0675, 1064
0036
0677
1190
0448
0036, 0291
0036, 0309
0036, 0131, 0319, 0397,
0695, 1464
0036, 0087, 0120, 0135,
0184, 0205, 0478
0291, 0439
0917
0379, 0583
0243, 0244
0741
0190
0583
1064
0097, 0114, 0131
0129
0036
0244, 0245, 0291
0233, 0347
0036, 0136, 0244, 0245,
0291, 0364, 0397, 0401,
0513, 0741, 0742
0244, 0291, 0513
0478
0114, 0233, 0244, 0274,
0571
0036, 0038, 0063, 0135,
0184, 0243, 0244, 0291,
0401, 0633
0036
0036, 0291, 0439
0036, 0401, 0688
0099, 0100, 0136, 0220,
0235, 0244
Brand Setup Code list for Philips 5-in-1 universal remote control
Bang & Olufsen
0114, 0592
Baohuashi
0291, 0439
Baosheng
0036
Barco
0407
Basic Line
0036, 0244, 0245, 0309,
0366, 0401, 0482, 0583,
0695, 1064, 1190
Baur
0388, 0482, 0539, 0562,
0571
Bazin
0244
Beaumark
0205
Beijing
0036, 0235, 0253, 0291,
0401, 0439, 0509, 0688,
0839
Beko
0222, 0319, 0397, 0445,
0513, 0633, 0741, 0742,
0835, 1064
Bell & Howell
0120
Bell and Howell
0120
BenQ
1783
Beon
0190, 0245, 0445
Berthen
0695
Best
0364, 0448
Bestar
0397, 0401
Bestar-Daewoo
0401
Binatone
0244
Black Diamond
0641, 1064, 1190, 1936
Black Panther
0129
Blaupunkt
0063, 0197, 0222, 0482,
0562
217
Blue Sky
Blue Star
Bondstec
Boots
Bosch
Boxlight
BPL
Brandt
Brinkmann
Brion Vega
Brionvega
Britannia
Brockwood
Broksonic
Brother
Bruns
BTC
Bush
Caihong
Canton
Capehart
Carad
Carena
Carrefour
Carver
Cascade
Cathay
CCE
Centrum
Century
CGE
Changcheng
Changfei
Changfeng
Changhai
Changhong
Chengdu
Ching Tai
Chun Yun
Chunfeng
Chung Hsin
Chungfeng
Chunsun
218
0245, 0309, 0482, 0514,
0526, 0583, 0695, 0741,
0742, 1064
0309
0274
0036, 0221, 0244
0347
0779
0235, 0309
0136, 0314, 0362, 0587,
0652, 0741
0445, 0513, 0695
0389
0114, 0389
0243, 0244
0205
0204
0291
0114
0245
0036, 0063, 0190, 0235,
0244, 0245, 0262, 0291,
0309, 0362, 0382, 0388,
0390, 0398, 0401, 0514,
0583, 0608, 0641, 0644,
0688, 0695, 0741, 1064,
1927
0036
0245
0063, 0205
0637, 0695, 1064
0482
0063, 0097
0197
0036
0245
0244
1064
0114, 0265, 0274
0274, 0397, 0445
0036, 0291, 0401, 0439,
0688
0036, 0401
0291, 0439
0036
0036, 0291, 0535
0036
0036
0036
0036, 0291
0063, 0135
0439
0036
Cimline
Cineral
Citizen
City
Clarivox
Clatronic
Clayton
CMS
CMS Hightec
Colortyme
Condor
Conic
Conrac
Conrowa
Contec
Continental Edison
Cosmel
Craig
Crosley
Crown
CS Electronics
CTC
Curtis Mathes
Cybertron
D-Vision
Daewoo
Dainichi
Dansai
Dansette
Dantax
Datsura
Dawa
Dayton
Daytron
Dayu
De Graaf
Decca
Degraff
Deitron
Dell
Denko
0036, 0245
0478
0062, 0087, 0309, 0478
0036
0097, 0364
0036, 0129, 0244, 0245,
0274, 0291, 0347, 0397,
0398, 0606, 0741
1064
0243
0244
0087, 0205
0036, 0274, 0291, 0309,
0347, 0397, 0438, 0445
0205
0835
0036, 0291, 0439, 1197
0036, 0063, 0184, 0243
0136, 0314, 0514
0364
0309
0114, 0274, 0397
0036, 0120, 0235, 0366,
0397, 0439, 0445, 0448,
0513, 0514, 0606, 0633,
0741, 0742, 1064
0243, 0245, 0274
0274
0062, 0071, 0087, 0120,
0193, 0205, 0478
0245
0583
0036, 0063, 0135, 0136,
0197, 0205, 0244, 0245,
0291, 0401, 0478, 0526,
0583, 0661, 0688, 0892,
0907, 1782, 1783, 1936
0243, 0245
0036, 0062, 0063, 0235,
0243
0439
0741, 0742
0235
0036
0036
0063, 0205, 0401
0401, 0688
0235, 0390, 0575
0099, 0244, 0543, 0648
0190, 0235
0401
1481
0291
Brand Setup Code list for Philips 5-in-1 universal remote control
Denver
DER
Desmet
Diamond
Digiline
Digitor
Digix
Dixi
DL
Domeos
Domland
Dongda
Donghai
Dream Vision
Dual
Dual Tec
Dumont
Durabrand
Dwin
Dynatech
Dynatron
Eaton
Edison-Minerva
Elbe
Elbe-Sharp
Electrograph
Electrohome
Elekta
Elfunk
Elin
Elite
Elman
Elta
Emco
Emerald
Emerson
Emperor
Erres
ESA
ESC
Ether
Etron
Eurofeel
Euroman
0614
0220
0036, 0114, 0347
0036, 0243, 0291, 0398,
0733
0132, 0695
1751
0907
0036, 0114
0614
0695
0421
0036
0036
1731
0244, 0286, 0379, 0421,
0558, 0571, 1164
0244
0097, 0114, 0129, 0205
0205, 1464
0120
0244
0039
0087
0514
0244, 0265, 0286, 0319,
0389, 0438, 0462, 0543,
0637, 0657
0543
1782
0100, 0205
0036, 0291, 0309
1064
0036, 0131, 0388, 0575
0245, 0347
0129
0036, 0291
0274
0204, 0205
0039, 0063, 0071, 0072,
0097, 0100, 0114, 0129,
0197, 0204, 0205, 0221,
0222, 0274, 0309, 0347,
0388, 0397, 0398, 0478,
0513, 0695, 0741, 1936
0309
0039
0839
0244
0036
0036
0244, 0291
0243, 0244, 0291, 0448
Brand Setup Code list for Philips 5-in-1 universal remote control
Europhon
Evolution
Expert
Exquisit
Feilang
Feilu
Feiyan
Feiyue
Fenner
Fer0
Ferguson
Fidelity
Filsai
Finlandia
Finlux
Firstar
Firstline
Fisher
Flint
Forgestone
Formenti
Formenti-Phoenix
Fortress
Fraba
Friac
Frontech
Fujimaro
Fujitsu
Fujitsu General
Funai
Furi
Futronic
0129, 0136, 0244, 0543
1783
0233
0274
0036
0036
0291, 0439
0036
0036, 0401
0362
0100, 0136, 0220, 0222,
0265, 0314, 0362, 0470,
0575, 0587, 0652, 1064
0190, 0220, 0243, 0244,
0291, 0388, 0390, 0398,
0439, 0450, 0539, 0558,
0571
0244
0099, 0131, 0132, 0190,
0235, 0243, 0373, 0390,
0575
0097, 0099, 0114, 0129,
0131, 0132, 0244, 0373,
0438, 0500, 0507, 0519,
0543, 0648, 0656, 0658,
0741, 0742, 0835
0036
0036, 0099, 0235, 0243,
0244, 0262, 0265, 0274,
0348, 0388, 0401, 0438,
0558, 0571, 0583, 0695,
0741, 0835, 1064
0063, 0072, 0099, 0114,
0131, 0184, 0235, 0244,
0397, 0571, 0582
0099, 0245, 0291, 0482,
0637
0220
0114, 0243, 0347
0243, 0347
0120
0397
0036, 0129, 0397, 0448,
0526, 0637
0036, 0190, 0244, 0274,
0291, 0390
0892
0036, 0099, 0233, 0244,
0286, 0379, 0710, 0880
0036, 0233, 0244, 0710
0291, 0695
0291, 0439
0291
219
Galaxis
Gateway
GBC
GE
GEC
Geloso
General Technic
Genesis
Genexxa
Gericom
Giant
Goldfunk
GoldHand
GoldStar
Gooding
Goodmans
Gorenje
GPM
Gradiente
Graetz
Gran Prix
Granada
Grandin
Grundig
Grundy
H&B
Haaz
Haier
220
0397
1782, 1783
0036, 0245, 0401
0062, 0071, 0087, 0099,
0120, 0205, 0309, 0478,
0587, 0652, 1481
0099, 0190, 0243, 0244,
0388, 0543
0036, 0390, 0401
0036
0036
0036, 0190, 0245
0835, 0892, 0907
0036, 0244
0695
0243
0036, 0063, 0099, 0100,
0136, 0190, 0205, 0243,
0244, 0274, 0317, 0388,
0390, 0404, 0482, 0633,
0741, 0742
0514
0036, 0038, 0062, 0063,
0099, 0243, 0244, 0245,
0262, 0265, 0291, 0362,
0398, 0401, 0507, 0514,
0526, 0543, 0583, 0587,
0606, 0614, 0657, 0661,
0688, 0695, 0741, 0835,
0907, 1064, 1190, 1927,
1936
0397, 0448
0245
0197
0190, 0366, 0388, 0398,
0514, 0741, 1190
0675
0072, 0099, 0135, 0190,
0235, 0244, 0253, 0366,
0383, 0390, 0500, 0543,
0575, 0587
0036, 0190, 0309, 0347,
0401, 0482, 0606, 0637,
0695, 0741, 0742, 0892,
0907, 1064
0036, 0063, 0097, 0190,
0222, 0470, 0514, 0562,
0583, 0614, 0657, 0710,
0733
0222
0835
0733
0535, 0614
Haihong
Haiyan
Halifax
Hallmark
Hampton
Hanimex
Hankook
Hanseatic
Hantarex
Harley Davidson
Harsper
Harwood
Havermy
HCM
Helios
Hello Kitty
Hema
Hemmermann
Higashi
Hikona
Hikone
Hinari
Hisawa
Hisense
Hit
Hitachi
Hitachi Fujian
Hitsu
HMV
Hoeher
Home Electronics
Hongmei
Hongyan
Hornyphon
Hoshai
0036
0291, 0439
0244
0205
0243, 0244
0245, 1935
0205
0036, 0114, 0244, 0309,
0347, 0388, 0404, 0421,
0526, 0571, 0583, 0661,
0688, 0741, 0835
0036, 0129, 0265, 0543,
0892
0087, 0205
0892
0036, 0439, 0514
0120
0036, 0244, 0245, 0291,
0309, 0439, 0445
0892
0478
0036, 0244
0571
0243
0245
0245
0036, 0063, 0099, 0190,
0245, 0262, 0291, 0309,
0379, 0382, 1935
0245, 0309, 0482, 0637,
0741
0036, 0235, 0535, 0583,
1197
0114
0036, 0062, 0063, 0071,
0099, 0129, 0132, 0135,
0136, 0184, 0190, 0205,
0221, 0244, 0309, 0383,
0390, 0500, 0507, 0508,
0519, 0526, 0535, 0543,
0575, 0605, 0656, 0661,
0746, 0751, 0771, 0911,
1064, 1072, 1164, 1197,
1252, 1508, 1603
0135
0036, 0245, 0482, 0637
0114, 0220
0741, 0892
0633
0036, 0120, 0291
0291, 0439
0039
0309
Brand Setup Code list for Philips 5-in-1 universal remote control
Hua Tun
Huafa
Huanghaimei
Huanghe
Huanglong
Huangshan
Huanyu
Huaqiang
Huari
Hugoson
Hyper
Hypson
Hyundai
ICE
ICeS
Ima
Imperial
Imperial Crown
InFocus
Ingelen
Ingersol
Inno Hit
Innowert
Interbuy
Interfunk
Internal
Intervision
Irradio
IRT
Isukai
ITC
ITS
ITT
ITT Nokia
ITV
Jean
JiaLiCai
Jinfeng
Jinque
Jinta
0036
0036
0036
0036
0036
0036, 0291, 0439
0243, 0244, 0291, 0401
0291, 0439
0291, 0439
0917
0036, 0243, 0244, 0274
0291, 0309, 0482, 0513,
0648, 0695, 0741, 0742,
1064
0892, 1179
0243, 0244, 0245, 0291,
0398
0243, 0245
0205
0274, 0397, 0445, 0657
0036, 0291, 0401, 0439,
0688
0779
0190, 0514, 0637, 0741
0036
0036, 0099, 0129, 0244,
0274, 0309, 0317, 0543,
1190
0892
0274, 0291
0039, 0114, 0190, 0274,
0302, 0388, 0539
1936
0036, 0129, 0244, 0245,
0274, 0291, 0309, 0404,
0421, 0482, 0513, 0514
0245, 0274, 0317, 0398
0478
0245, 0309, 0482
0244, 0347
0243, 0291, 0398
0190, 0220, 0235, 0366,
0373, 0388, 0500, 0507,
0571, 0575, 0637
0097, 0190, 0222, 0235,
0366, 0373, 0388, 0500,
0507, 0575, 0633, 0637
0291, 0401
0036, 0063
0036, 0291, 0439
0235, 0253
0036, 0291, 0439
0036, 0291, 0439
Brand Setup Code list for Philips 5-in-1 universal remote control
Jinxing
JMB
Johnson
Jubilee
Juhua
JVC
Kaige
Kaisui
Kambrook
Kamp
Kangli
Kangyi
Kapsch
Karcher
Kathrein
Kawa
Kawasho
KB Aristocrat
Kebao
KEC
Kendo
Kennedy
Kennex
KIC
Kingsley
Kiota
Kioto
Kiton
Kneissel
Kolin
Kolster
Kongque
Konichi
Konka
Kontakt
Korting
Koyoda
Kraking
Kriesler
KTV
Kuaile
Kulun
Kunlun
Kyoshu
0036, 0291, 0583
0470, 0526, 0583, 0661
0482
0583
0291, 0439
0063, 0097, 0120, 0220,
0245, 0398, 0445, 0535,
0633, 0677, 0680, 0710
0036, 0291, 0439
0036, 0243, 0244, 0245,
0309, 0482
0244, 0404
0243, 0244
0036, 0291, 0401, 0688
0036, 0291, 0439
0131, 0190, 0233, 0388
0291, 0309, 0448, 0633,
0637, 0741
0583
0398
0243
0190
0608
0087
0129, 0262, 0274, 0389,
0438, 0637, 1464
0233, 0462
0695, 1064
0244
0243
0398, 0482
0583, 0733
0695
0265, 0286, 0319, 0389,
0401, 0438, 0462, 0526,
0583, 0637
0063, 0135
0129, 0274
0036, 0291
0036
0245, 0309, 0398, 0445,
0614, 0741, 0746
0514
0114, 0347, 0448
0036
0265
0039
0244
0036, 0291, 0439
0036
0235, 0253, 0291, 0401,
0688
0439, 0445
221
Kyoto
L&S Electronic
LaSAT
Leader
Legend
Lemair
Lenco
Leyco
LG
Liesenkotter
Lifetec
Lloyd's
Local India TV
Lodos
Loewe
Logik
Logix
Longjiang
Luma
Lumatron
Lux May
Luxman
Luxor
LXI
M Electronic
Magnadyne
Magnafon
Magnasonic
Magnavox
Magnum
Manesth
Manhattan
Marantz
Marelli
222
0190, 0243, 0244
0741, 0835
0513
0036
0036, 0364
0438
0401, 0614
0099, 0291, 0606
0087, 0135, 0205, 0583,
0671, 0741, 0742, 1175,
1664
0039
0245, 0401, 0695, 0741,
1064, 1164
0036
0036, 0235, 0291, 0398,
0629
1064
0114, 0319, 0539, 0543,
0660, 0682
0036, 0038, 0087, 0099,
0220, 0398, 0907
0695
0291, 0439
0233, 0286, 0389, 0390,
1064
0100, 0190, 0233, 0244,
0286, 0291, 0388, 0583
0036, 0608
0606
0190, 0221, 0235, 0244,
0317, 0383, 0388, 0390,
0500, 0507, 0575, 0658,
1064, 1190
0062, 0063, 0087, 0120,
0193, 0205, 0235
0036, 0131, 0132, 0136,
0190, 0222, 0243, 0244,
0274, 0314, 0373, 0401,
0438, 0507, 0519, 0539,
0661, 0688, 0741
0114, 0129, 0274, 0543,
0571
0129, 0243, 0543
0120, 0136
0062, 0063, 0087, 0309,
0462, 0733, 1481, 1782
0675, 0741, 0742
0062, 0244, 0262, 0291,
0347
0695, 1064
0439, 0583, 0731, 1481
0114
Mark
Master's
Masuda
Matsui
Matsushita
Maxcent
Maxent
MCE
Mediator
Medion
Megas
Megatron
MEI
Meile
Memorex
Memphis
Mercury
Metronic
Metz
MGA
MGN Technology
Micromaxx
Microstar
Minato
Minerva
Minoka
Mirror
Mistral
Mistral Electronics
Mitsubishi
Mivar
Monaco
Motorola
MTC
0244, 0741, 0742
0526
0036, 0244, 0245, 0291,
0398
0036, 0038, 0062, 0063,
0099, 0190, 0204, 0222,
0235, 0243, 0244, 0262,
0362, 0379, 0382, 0383,
0390, 0398, 0460, 0470,
0482, 0514, 0543, 0571,
0583, 0606, 0656, 0741,
1064
0262, 0677
1782, 1783
1782
0036
0039
0272, 0539, 0583, 0695,
0741, 0835, 0907, 1064,
1164, 1464, 1927
0637
0036, 0205
1064
0291, 0439
0036, 0062, 0087, 0099,
0205, 0222, 1064
0364
0036, 0087
0652
0114, 0302, 0394, 0415,
0474, 0562, 0614, 0695,
0773, 1190
0205, 0245, 0401
0205
0657, 0695, 0741, 0835,
1064
0835
0583
0097, 0135, 0222, 0514,
0543, 0562
0439
1927
0220
0220
0038, 0063, 0114, 0120,
0135, 0205, 0222, 0539,
0562, 0583, 1064
0243, 0244, 0317, 0318,
0319, 0543, 0636
0036
0120
0038, 0087, 0243, 0309,
0397, 0539
Brand Setup Code list for Philips 5-in-1 universal remote control
MTlogic
Mudan
Multibroadcast
Multitec
Multitech
Murphy
Musikland
Myryad
NAD
Naiko
Nanbao
Nansheng
Naonis
NAT
National
NEC
Neckermann
NEI
Neovia
Nesco
NetTV
Network
Neufunk
New Tech
Newave
Nicam
Nicamagic
Nikkai
Nikko
Nikkodo
Nobliko
Nokia
Nordic
Nordmende
Novak
Novatronic
Nu-Tec
Oceanic
0741
0036, 0235, 0253, 0291,
0439
0220
0513, 0695, 1064
0036, 0129, 0243, 0244,
0274, 0291, 0390, 0513
0099, 0190, 0243
0245, 0274
0583
0193, 0205, 0388
0633
0036, 0291, 0439
0291, 0439
0390
0253
0235, 0253, 0535
0036, 0038, 0063, 0197,
0205, 0244, 0272, 0291,
0347, 0401, 0439, 0482,
0526, 0535, 0614, 0688,
0731, 0732, 1197, 1297,
1731
0114, 0274, 0347, 0390,
0397, 0438, 0445, 0583
0190, 0364, 0398
0892
0274
1782
0364
0245, 0583, 0637, 0741
0244
0036, 0120, 0205
0571
0243
0036, 0062, 0063, 0099,
0190, 0243, 0244, 0245,
0291, 0364
0205
0205
0097, 0129, 0243
0190, 0235, 0347, 0366,
0373, 0388, 0401, 0500,
0507, 0575, 0633, 0637,
0658
0244
0136, 0222, 0314, 0587,
0741
0039
0132, 0401, 0558
0482
0190, 0235, 0388, 0500,
0575
Brand Setup Code list for Philips 5-in-1 universal remote control
Okano
Omega
On Command
Onimax
Onwa
Optimus
Optonica
Orion
Orline
Ormond
Orsowe
Osaki
Osio
Oso
Osume
Otto Versand
Pacific
Pael
Palladium
Palsonic
Panama
Panasonic
Panavision
Panda
Pathe
Pathe Cinema
Pausa
Paxonic
PCE
Penney
Perdio
0036, 0397
0291
0558
0741
0129, 0245, 0398, 0460,
0608, 0629
0120, 0193, 0205, 0677
0120
0038, 0204, 0205, 0262,
0291, 0347, 0348, 0382,
0439, 0470, 0543, 0558,
0571, 0583, 0682, 0741,
0907, 1935, 1943
0245
0695, 1064
0543
0099, 0244, 0245, 0291,
0382, 0383, 0401, 0439,
0583
0317
0245
0063, 0099, 0184, 0245
0063, 0120, 0136, 0244,
0253, 0262, 0274, 0347,
0388, 0539, 0562, 0571,
0583
0470, 0583, 0741, 1064,
1164
0243
0274, 0390, 0397, 0438,
0445, 0657, 0682, 0741,
1164
0244, 0245, 0291, 0404,
0445
0244, 0274, 0291
0062, 0099, 0135, 0190,
0220, 0235, 0253, 0388,
0394, 0450, 0535, 0543,
0575, 0677, 0880, 1337,
1677
0438
0036, 0235, 0253, 0291,
0439, 0535, 0733
0265
0190, 0243, 0265, 0347
0036
0087
0087
0062, 0063, 0072, 0087,
0097, 0135, 0205
0099, 0190, 0243, 0309,
0347
223
Philco
Philex
Philips
Phoenix
Phonola
Pilot
Pioneer
Pionier
Plantron
Playsonic
Polaroid
Polytron
Portland
Powerpoint
Prandoni-Prince
Precision
Premier
Prima
Prinston
Prinz
Profex
Profi
Profitronic
Proline
Prosonic
Protec
Protech
Proton
ProVision
Pulser
Pye
Qingdao
Quadral
Quartz
Quasar
Quelle
Questa
224
0114, 0205, 0274, 0397,
0445, 0478
0220
0036, 0039, 0072, 0114,
0135, 0205, 0220, 0265,
0388, 0401, 0450, 0539,
0583, 0632, 0799, 1481,
1783
0114, 0243, 0347, 0513
0039, 0114, 0220, 0243
0038, 0087, 0205, 0733
0038, 0136, 0190, 0193,
0197, 0314, 0388, 0450,
0513, 0539, 0787
0513
0036
0244, 0366, 0741, 0742
0892
0309
0401, 0478
0514
0388, 0390, 0543
0204, 0309
0291
0036, 0291, 0439
1064
0221, 0388, 0571
0036, 0190, 0388, 0390
0036
0129
0099, 0100, 0348, 0438,
0648, 0652, 0657, 0661,
1064
0244, 0606, 0695, 0741
0036, 0129, 0244, 0274,
0291, 0364
0036, 0129, 0244, 0274,
0291, 0364, 0445, 0513,
0695, 1064
0036, 0205, 0671
0583, 0741, 1064
0205
0039, 0114, 0401, 0439,
0583
0235, 0253, 0291, 0439
0245
0205
0036, 0062, 0274, 0677,
0892
0038, 0097, 0131, 0222,
0388, 0539, 0562, 0571,
0695, 1064
0063
Questar
Radialva
Radiola
Radiomarelli
RadioShack
Radiotone
Rank Arena
RBM
RCA
Realistic
Recor
Rediffusion
Reflex
Relisys
Reoc
Rex
RFT
Rhapsody
Road Authority
Roadstar
Robotron
Rover
Rowa
Royal Lux
Runco
Saba
Saccs
Sagem
Saige
Saisho
Saivod
Sakai
Sakyno
Salora
Salsa
Sambers
Sampo
0063
0245, 0364
0039, 0244, 0583
0114, 0543
0205
0036, 0291, 0439, 0606,
0675, 0695, 1064
0063, 0629
0097
0087, 0120, 0184, 0205,
0587, 0645, 0652, 1481
0205
0445
0063, 0190, 0373, 0388,
0575
0695, 1064
0892
0741
0190, 0233, 0286, 0291,
0390, 0438
0099, 0114, 0291
0243
0309
0036, 0245, 0291, 0309,
0445, 0695, 0741, 1064,
1927
0114
0063
0036, 0243, 0291, 0614
0362, 0439
0087
0114, 0136, 0190, 0314,
0362, 0388, 0525, 0543,
0575, 0587, 0652, 0741
0265
0482, 0637, 0645
0036
0036, 0038, 0190, 0204,
0244, 0262, 0291, 0543,
0571
0695, 1064, 1190
0190
0482
0190, 0221, 0235, 0317,
0383, 0388, 0390, 0507,
0543, 0575, 0648, 0658
0362
0129, 0543
0036, 0063, 0120, 0205,
0677, 1782, 1783
Brand Setup Code list for Philips 5-in-1 universal remote control
Samsung
Sandra
Sanjian
Sanky
Sansei
Sansui
Santon
Sanyo
Sanyuan
Saville
SBR
Schaub Lorenz
Schneider
Scotch
Scotland
Scott
Sears
Seaway
Seelver
SEG
SEI
Sei-Sinudyne
Seleco
Sencora
Sentra
Serino
Shancha
0036, 0062, 0063, 0072,
0087, 0099, 0120, 0190,
0205, 0235, 0243, 0244,
0253, 0291, 0317, 0389,
0397, 0398, 0509, 0583,
0614, 0645, 0671, 0709,
0745, 0839
0243, 0244
0291, 0439
0087
0478
0087, 0398, 0482, 0629,
0682, 0733, 0741, 1564
0036
0038, 0063, 0072, 0099,
0131, 0132, 0135, 0184,
0197, 0235, 0243, 0244,
0291, 0366, 0397, 0439,
0535, 0571, 0582, 0731,
1782
0036, 0120
0087
0039, 0220, 0583
0388, 0401, 0513, 0575,
0633, 0741
0039, 0097, 0190, 0244,
0245, 0274, 0286, 0379,
0388, 0398, 0421, 0571,
0583, 0675, 0695, 0741,
1064, 1164
0205
0190
0204, 0205
0062, 0063, 0087, 0120,
0193, 0205, 0235
0661
1064
0036, 0063, 0129, 0243,
0244, 0245, 0291, 0389,
0514, 0661, 0695, 1064,
1190, 1464
0114, 0129, 0204, 0233,
0543, 0571
0114, 0129, 0233, 0543,
0571
0190, 0233, 0286, 0291,
0373, 0389, 0390, 0398,
0438, 0462
0036
0062
0120, 0482, 0637
0291, 0439
Brand Setup Code list for Philips 5-in-1 universal remote control
Shanghai
Sharp
Shen Ying
Shencai
Sheng Chia
Shenyang
Sherwood
Shivaki
Show
Siarem
Siemens
Siera
Siesta
Signature 2000
Silva
Silver
SilverCrest
Simpson
Singer
Sinudyne
Skantic
SKY
Sky Brazil
Skyworth
Sliding
SLX
Smaragd
Soemtron
Solavox
Sonawa
Sonber
Songba
Sonitron
Sonoko
Sonolor
Sontec
Sony
Sound & Vision
Soundesign
Soundwave
Sowa
Spectra
0036, 0235, 0253, 0291,
0439
0036, 0063, 0120, 0184,
0220, 0283, 0518, 0543,
0677, 0695, 0845, 1190,
1220
0036
0036, 0291, 0439
0036, 0120
0036, 0291
0036
0205, 0401, 0470, 0583
0036, 0099, 0445
0114, 0129, 0543
0184, 0220, 0222, 0562
0039, 0583
0397
0120
0243, 0388, 0675
0063, 0388, 0482, 0742
1064
0038, 0205
0036, 0087, 0114, 0129,
0362, 0398, 0460, 0462,
1564
0114, 0129, 0204, 0233,
0262, 0543, 0571
0190, 0383
0907
0907
0036, 0291
0892, 0907
0695
0514
0892
0099, 0190, 0388, 0575
0245
0129
0036
0235, 0244, 0366, 0397
0036, 0309
0190, 0235, 0309, 0388,
0575
0036, 0397
0038, 0063, 0120, 0129,
0184, 0197, 0220, 0380,
0390, 0677, 0861, 1532,
1678
0129, 0401
0205
0347, 0445, 0742
0063, 0087, 0205, 0253
0036
225
Spectravision
Ssangyong
Staksonic
Standard
Standard Components
Starlite
Stenway
Stern
Strato
Strong
Sunkai
Sunstar
Sunwatt
Superla
Superscan
Supersonic
SuperTech
Supra
Susumu
SVA
Svasa
Swissline
Sylvania
Symphonic
Synco
Sytong
T+A
Tacico
Tai Yi
Taishan
Tandberg
Tandy
Tashiko
Tatung
TCL
TCM
Teac
Tec
Tech Line
Techica
226
0205
0036
0036
0036, 0244, 0245, 0347,
0401, 1064
0036, 0245
0036, 0291
0245, 0309
0190, 0233, 0286, 0390,
0438
0036, 0291
1190
0348, 0382, 0482, 0514,
0637, 0892
0036, 0291, 0398, 0606
0482
0543
0120
0036, 0235, 0482
0036, 0243, 0245
0036, 0205
0245, 0314, 0362
0614, 0892
0482
0274
0063, 0205
0205
0063, 0087, 0120, 0205,
0478
0243
0474
0036, 0205
0036
0036, 0401
0394
0099, 0120, 0190, 0244,
0245, 0274
0063, 0190, 0243, 0244,
0286, 0390, 0677
0036, 0038, 0063, 0087,
0099, 0244, 0302, 0543,
0648, 0656, 1783
0439, 0733, 1564
0741, 0835
0036, 0197, 0205, 0244,
0291, 0309, 0439, 0445,
0482, 0539, 0571, 0695,
0733, 0741, 0782, 1064,
1464, 1782
0036, 0190, 0244, 0274,
0286, 0364
0695, 1190, 1464
0245
Technema
Technics
TechniSat
Technisson
Technosonic
Technovox
Techwood
Tecnimagen
Teco
Tedelex
Teknika
Telecor
Telefunken
Telemeister
Telestar
Teletech
Teleton
Televideon
Tempest
Tensai
Tenson
Tevion
Texet
Thomas
Thompson
Thomson
Thorn
Thorn-Ferguson
Tiane
TMK
TML
Tobishi
Tobo
Tokai
Tokaido
Tokyo
Tomashi
Tongguang
Tongtel
0347
0253, 0583, 0677
0583, 0682
0741
0583
0244
0087, 1190
0583
0036, 0063, 0120, 0205,
0245, 0291, 0680
0036, 0235, 0244, 0445,
0633, 1564
0087, 0205
0421
0100, 0136, 0314, 0362,
0373, 0513, 0525, 0587,
0614, 0652, 0741
0347
0036, 0583, 0606
0036, 0364, 0695, 1064
0063, 0233, 0244, 0286,
0390
0243, 0347
0036, 0291, 0482
0036, 0131, 0132, 0244,
0245, 0274, 0347, 0398,
0401, 0404, 0742, 1064
0036, 0347
0583, 0675, 0695, 0741,
0835, 1064, 1164
0036, 0243, 0244, 0245,
0401
0205
0652
0136, 0314, 0362, 0587,
0652
0062, 0063, 0099, 0100,
0131, 0136, 0190, 0220,
0265, 0291, 0362, 0388,
0526, 0539, 0562
0100, 0220, 0265, 0526
0120
0204, 0205
1783
0245
0036, 0291, 0439
0036, 0190, 0364, 0401,
0695, 1064
1064
0062
0245, 0309
0291, 0439
0614
Brand Setup Code list for Philips 5-in-1 universal remote control
Topline
Toshiba
Towada
Toyoda
Toyomenka
Trakton
Trans Continens
TRANS-continents
Transonic
Triad
Trical
Trident
Tristar
Triumph
Tsoschi
Tuntex
TVTEXT 95
Uher
Ultra
Ultravox
Unic Line
United
Universum
Univox
V
V2max
V7 Videoseven
Vestel
Victor
Videocon
Videologic
Videologique
Videomac
Videosat
Videotechnic
Videoton
Vidtech
0695
0036, 0038, 0062, 0063,
0072, 0087, 0097, 0120,
0129, 0136, 0193, 0222,
0244, 0291, 0439, 0450,
0535, 0645, 0671, 0677,
0741, 0745, 1190, 1535,
1731
0244
0036, 0291, 0398
0205
0244
0244, 0695, 1064
0648, 0892
0036, 0291, 0445, 0482,
0539, 0614
0245, 0583
0184
0543
0220, 0245
0204, 0373, 0543, 0583
0309
0036
0583
0233, 0347, 0401, 0445,
0507, 0513
0099
0114, 0129, 0243, 0274
0482
0741, 0742, 1064, 1943
0036, 0038, 0063, 0097,
0131, 0132, 0184, 0197,
0204, 0244, 0274, 0291,
0317, 0373, 0388, 0389,
0397, 0438, 0445, 0448,
0500, 0507, 0519, 0539,
0562, 0571, 0645, 0658,
0695, 1064, 1190, 1464
0114, 0190, 0364
1782, 1783
0892
0907, 1782
0244, 0583, 0695, 1064,
1190
0063, 0677, 0680
0535
0243, 0245
0245
0036
0274
0244, 0347
0383
0063, 0205
Brand Setup Code list for Philips 5-in-1 universal remote control
Viewsonic
Viking
Visio
Vision
Vistar
Vizio
Voxson
Waltham
Wards
Warumaia
Watson
Watt Radio
Wega
Weipai
Welltech
Weltblick
Welton
Westinghouse
Wharfedale
White Westinghouse
Windsor
Windstar
Windy Sam
Wintel
World
World-of-Vision
Worldview
Xenius
Xiahua
Xianghai
Xiangyang
Xiangyu
Xihu
Xinaghai
Xingfu
Xinghai
Yamaha
Yamishi
Yingge
Yoko
Yonggu
Yorx
Yousida
Yuhang
Zanela
Zanussi
0751, 1782
0087
1782, 1783
0244, 0291, 0347
0233
1783
0114, 0190, 0205, 0390,
0445
0136, 0190, 0244, 0383,
0445, 0470, 0695, 1064
0062, 0087, 0120, 0193,
0205, 0222
0401, 0688
0036, 0245, 0347, 0421,
0606, 0695, 1064, 1464
0129, 0243, 0571
0063, 0114
0036
0741
0244, 0347
0205
0478, 0917
0583
0243, 0347, 0364, 0478,
1936
1064
0309, 0364
0583
0741
0478
0892, 0907, 0917
0482
0661, 0688
0036, 0291, 0439
0036
0291, 0439
0036
0291, 0439
0439
0036
0291
0677, 1603
0244, 0309, 0482
0036
0036, 0243, 0244, 0245,
0274, 0291, 0366, 0448
0036
0072
0036
0036
0265
0190, 0233, 0286, 0291,
0390
227
Zenith
Zenor
ZhuHai
0120, 0205, 0839, 1936
0366
0036, 0401
###### Setup Code For All VCRs (V)
######
A-Mark
Accent
Admiral
Adventura
Adyson
Aiko
Aim
Aiwa
Akai
Akiba
Akura
Alba
Allegro
Allstar
Ambassador
America Action
American High
Amstrad
Anam
Anam National
Anitech
Ansonic
Aristona
ASA
Asha
Astra
Asuka
Audiosonic
Audioton
Audiovox
Avis
AVP
Awa
Baird
Bang & Olufsen
Basic Line
Beaumark
Beko
Bell & Howell
Bell and Howell
228
0027, 0064, 0267, 0305
0099
0047, 0074, 0075, 0131
0027, 0064, 0267
0099
0305
0047, 0305, 0375, 0669
0027, 0059, 0064, 0334,
0375, 0379, 0769, 1164
0047, 0064, 0068, 0133,
0267, 0342, 0375, 0379,
0669
0099
0099
0027, 0047, 0099, 0108,
0305, 0342, 0375, 0379
1164
0108
0047
0305
0108
0027, 0099, 0305
0064, 0253, 0267, 0305,
0507
0253, 1589
0099
0027
0108, 0173
0064, 0108
0267
0267
0064, 0065
0305
0047
0064, 0065, 0305, 0808
0027, 0099
0027, 0379
0064, 0070, 0305, 0669
0027, 0068, 0131, 0133
0526
0047, 0099, 0131, 0305
0267
0131
0027, 0075, 0131
0027, 0075, 0131
Bestar
Black Diamond
Black Panther
Blaupunkt
Blue Sky
Bondstec
Brandt
Brandt Electronique
Brinkmann
Broksonic
Bush
Calix
Candle
Canon
Capehart
Carrefour
Carrera
Carver
Casio
Cathay
Catron
CCE
Centrum
CGE
Changhong
Cimline
Cineral
CineVision
Citizen
Classic
Clatronic
Colortyme
Colt
Combitech
Condor
Craig
Criterion
Crosley
Crown
Curtis Mathes
Cybernex
Cyrus
Daewoo
Dansai
Dantax
Daytron
0305
0669
0305
0061, 0108, 0253
0064, 0099, 0305, 0375,
0379, 0507, 0669, 1164
0047, 0099
0068, 0347, 0348
0068
0375
0375
0027, 0099, 0108, 0305,
0342, 0375, 0379, 0669,
0769
0064
0064, 0065
0061
0047
0072
0267
0108, 0173
0027
0305
0047
0099, 0305
0620
0027
0075, 0108
0099
0305
1164
0027, 0064, 0267, 0305
0064
0027, 0047, 0099
0072, 0305
0027, 0099
0379
0047, 0305
0064, 0074, 0099, 0267
0027, 0099
0027, 0108
0047, 0064, 0099, 0305,
0507
0027, 0068, 0267, 0305,
0459
0267
0108
0047, 0064, 0072, 0131,
0305, 0379, 0664, 0669,
0871, 1164
0099, 0305
0379
0047, 0064, 0305
Brand Setup Code list for Philips 5-in-1 universal remote control
De Graaf
Decca
Degraff
Deitron
Denko
Denon
Derwent
Diamant
Diamond
Digitor
DSE
Dual
Dumont
Durabrand
Dynatech
Elbe
Elcatech
Electrohome
Electrophonic
Elin
Elsay
Elta
Emerex
Emerson
ESA
ESC
Europhon
Fast
Fenner
Ferguson
Fidelity
Finlandia
Finlux
Firstline
Fisher
Flint
Frontech
Fujitsu
Fujitsu General
Funai
Galaxis
Garrard
0069, 0075, 0108, 0131,
0193
0027, 0094, 0108, 0379
0069, 0075, 0108, 0131,
0173
0305
0099
0069, 0108
0068, 0348
0064
0375
0669
0669
0027, 0068, 0108, 0305,
0375
0027, 0108, 0131
0065, 0620, 0669
0027, 0267
0065, 0305
0099
0027, 0064, 0070, 0267
0064
0267
0099
0099, 0305
0059
0027, 0064, 0070, 0072,
0099, 0267, 0305, 0375,
0620, 0664
1164
0047, 0267, 0305
0047
0924
0047
0027, 0068, 0193, 0305,
0347, 0348
0027, 0099, 0267, 0379,
0459
0027, 0064, 0069, 0070,
0075, 0108, 0131, 0133,
0193, 0253, 0411
0027, 0069, 0108, 0131
0064, 0070, 0072, 0099,
0305, 0375, 0507, 1164
0027, 0047, 0074, 0131
0375
0047, 0099
0027, 0064, 0072
0064
0027, 0064, 0099, 0305,
0620
0305
0027
Brand Setup Code list for Philips 5-in-1 universal remote control
GE
GEC
General
General Technic
Genexxa
Go Video
GoldHand
GoldStar
Goodmans
GPX
Gradiente
Graetz
Granada
Grandin
Grundig
Haaz
Hanimex
Hanseatic
Hantor
Haojie
Harley Davidson
Harman/Kardon
Harvard
Harwood
HCM
HI-Q
Hinari
Hisawa
Hischito
Hitachi
Hoeher
Hornyphon
Hughes Network
Hypson
Hytek
Imperial
Ingersol
Inno Hit
Interbuy
Interfunk
Internal
0027, 0075, 0253, 0267,
0347
0108
0047, 0072
0375
0027, 0064, 0131, 0305
0267, 0459, 0647, 1164
0099
0027, 0064, 0065, 0253,
0305, 0507, 1164
0027, 0047, 0064, 0099,
0108, 0305, 0375, 0379,
0664, 0669, 0769
0064
0027
0068, 0131, 0267
0027, 0064, 0069, 0075,
0108, 0131, 0253, 0267
0027, 0064, 0099, 0305,
0769
0061, 0099, 0108, 0253,
0347, 0374, 0375, 0376,
0379, 0769
0375
0379
0064, 0065, 0108
0047
0267
0027
0065, 0108, 0173
0099
0099
0099
0027, 0074
0068, 0099, 0267, 0305,
0379
0379
0072
0027, 0064, 0068, 0069,
0072, 0108, 0193, 0267,
0620
0305, 0669
0108
Systems0069
0027, 0064, 0099, 0305,
0507
0027, 0074, 0099
0027
0267
0099
0099
0108, 0131
0305, 0664
229
International
Intervision
Irradio
ITT
ITT Nokia
ITV
Janeil
JBL
Jensen
JMB
Joyce
JVC
Kaisui
Kambrook
Karcher
KEC
Kendo
Kenwood
KIC
Kimari
Kioto
KLH
Kneissel
Kodak
Kolin
Korpel
KTV
Kuba Electronic
Kyoto
Lenco
Leyco
LG
Lifetec
Lloyd's
Lloyds
Loewe
Logik
Lumatron
Lunatron
Lux May
Luxor
LXI
M Electronic
Magnadyne
Magnasonic
230
0064, 0305, 0669
0027, 0305
0099, 0108
0068, 0131, 0133, 0267,
0411
0068, 0131, 0133, 0267,
0579
0047, 0064, 0305
0267
0305
0068, 0094
0375, 0379, 0769
0027
0068, 0072, 0094, 0108,
0411
0099
0064
0108, 0305, 0669
0064, 0305
0099, 0133, 0305, 0342,
0375, 0669
0065, 0068, 0094, 0411
0027
0074
0375
0099
0064, 0305, 0375, 0379
0064
0068, 0070
0099
0027
0074
0099
0305
0099
0064, 0065, 0069, 0072,
0267, 0507, 1164
0375
0027
0027, 0065, 0099, 0267
0064, 0108, 1589
0027, 0099, 0133, 0267
0305, 0620, 1164
1164
0099
0070, 0074, 0075, 0131,
0133, 0342
0027, 0064, 0069, 0094
0027, 0064, 0065, 0267
0108
0027, 0047, 0064, 0099,
0267, 0305, 0620
Magnavox
Magnin
Magnum
Manesth
Marantz
Mark
Marta
Mastec
Master's
Matsui
Matsushita
Medion
Memorex
Memphis
Mercury
Metronic
Metz
MGA
MGN Technology
Micormay
Midland
Minolta
Mitsubishi
Motorola
Movie Walker
MTC
MTX
Multitec
Multitech
Murphy
Myryad
NAD
Naiko
National
NEC
Neckermann
Nesco
Newave
Newtech
Nikkai
Nikko
Nikkodo
Nikon
Nishi
Noblex
0027, 0064, 0075, 0108,
0253, 0267, 0620, 0669
0267
0669
0072, 0099, 0108
0065, 0108, 0173
0027, 0305
0064
0669
0305
0064, 0267, 0305, 0375,
0376, 0379, 0769
0108, 0253
0375, 0379, 0669
0027, 0064, 0074, 0075,
0099, 0131, 0267, 0305,
0334, 0375, 0596
0099
0047
0108
0064, 0108, 0253, 0374,
0863, 0864, 1589
0070, 0267
0267
0375
0267
0069
0027, 0068, 0069, 0070,
0074, 0075, 0094, 0108,
0507, 0669
0075
0099
0027, 0099, 0267
0027
0064
0027, 0047, 0099
0027
0108
0131, 0267
0375, 0669
0253
0064, 0065, 0068, 0075,
0094, 0131, 0305, 1164
0108
0099
0064
0099
0047, 0099, 0305
0064, 0305
0064, 0305
0061
0267
0267
Brand Setup Code list for Philips 5-in-1 universal remote control
Nokia
Nordmende
Oceanic
Okano
Olympus
Onimax
Optimus
Orbit
Orion
Osaki
Osume
Otto Versand
Pace
Pacific
Palladium
Palsonic
Panasonic
Pathe Cinema
Pathe Marconi
Penney
Pentax
Perdio
Philco
Philips
Phoenix
Phonola
Pilot
Pioneer
Polk Audio
Portland
Prinz
Profitronic
Proline
Prosco
Prosonic
Protec
Protech
ProVision
Pulsar
Pulser
Pye
Quartz
0068, 0069, 0075, 0108,
0131, 0133, 0267, 0305,
0342, 0579
0068, 0094, 0347, 0348,
0411, 0521
0027, 0068, 0075, 0108,
0131, 0133
0099, 0305, 0342, 0375
0131, 0253
0669
0027, 0064, 0074, 0075,
0131, 0267, 0459, 0620
0099
0027, 0131, 0267, 0305,
0375, 0376, 0379, 0769
0027, 0064, 0099
0099
0108
0379
0027, 0375, 0669, 0769
0064, 0068, 0099, 0375
0027, 0099, 0669
0027, 0047, 0253, 0863,
0864, 1589
0070
0068
0027, 0064, 0065, 0069,
0074, 0094, 0108, 0267
0069
0027
0027, 0065, 0099, 0108,
0253
0027, 0061, 0072, 0075,
0108, 0173, 0253, 0411,
0620, 1296
0305
0108
0064
0069, 0094, 0108, 1830
0108, 0173
0047, 0305, 0664
0027
0108, 0267
0027, 0305, 0347, 0669
0871
0305
0027, 0099
0099, 0108
0305
0267, 0305
0267
0027, 0108
0074
Brand Setup Code list for Philips 5-in-1 universal remote control
Quasar
Quelle
Questar
Radialva
Radiola
Radionette
RadioShack
Radix
Randex
Rank Arena
RCA
Realistic
Reoc
Rex
RFT
Ricoh
Rio
Roadstar
Royal
Saba
Saisho
Salora
Sampo
Samsung
Samtron
Samurai
Sanky
Sansui
Sanyo
Saville
SBR
Schaub Lorenz
Schneider
Scott
Sears
Seaway
SEG
0253, 0305
0108
0047
0064, 0075
0108
0064, 1164
0027, 0064, 0074, 0075,
0131, 0267
0064
0064
0068
0027, 0069, 0072, 0075,
0133, 0193, 0253, 0267,
0347, 0749
0027, 0064, 0074, 0075,
0131, 0267, 0305
0375
0068, 0411
0099
0061
1164
0064, 0065, 0099, 0108,
0267, 0305, 0769
0099
0068, 0305, 0347, 0348,
0411, 0521
0375
0070, 0131, 0133
0064, 0075
0027, 0065, 0072, 0267,
0459, 0647
0267
0047
0075
0027, 0068, 0094, 0099,
0133, 0267, 0375
0027, 0074, 0075, 0094,
0131, 0267, 0375, 1164
0267, 0305, 0379
0108, 0173
0027, 0068, 0131, 0133,
0342, 0375
0027, 0064, 0069, 0099,
0108, 0173, 0267, 0305,
0375, 0379, 0669, 0924,
1164
0070, 0072, 0620
0027, 0061, 0064, 0068,
0069, 0070, 0072, 0074,
0075, 0094, 0099, 0131
0305
0099, 0108, 0267, 0305,
0664, 0669
231
SEI
Seleco
Semp
Sentra
Sharp
Shinco
Shintom
Shivaki
Shogun
Siemens
Siera
Signature 2000
Silva
Silver
SilverCrest
Singer
Sinudyne
Smaragd
Solavox
Sonic Blue
Sonneclair
Sontec
Sonwa
Sony
Soundmaster
Soundwave
Ssangyong
Stern
STS
Sunkai
Sunstar
Suntronic
Sunwood
Supra
Susumu
SV2000
SVA
Sylvania
Symphonic
Tandberg
Tandy
Tashiko
Tatung
Tchibo
TCM
232
0108
0047, 0064, 0068, 0411
0072
0047, 0099, 0305
0027, 0059, 0064, 0074,
0075, 0596
0027
0027, 0099, 0131, 0267
0064
0267
0064, 0108, 0131, 0173,
0347, 0374
0108
0027, 0064, 0075
0064
0305
0669
0064, 0072, 0099, 0267,
0375
0108, 0379
0375
0047, 0061
1164
0099
0064
0669
0027, 0059, 0061, 0074,
0075, 0094, 0133, 0253,
1059
0027
0064, 0375
0099
0305
0069
0305, 0375
0027
0027
0099
0064, 0305, 0375
0064
0027, 0099
0027
0027, 0070, 0108, 0620
0027, 0267, 0620
0305
0027, 0131
0027, 0064, 0075, 0108,
0267
0027, 0068, 0070, 0072,
0075, 0094, 0108, 0375,
0379
0375
0375
Teac
Tec
Tech Line
Technics
Teco
Tedelex
Teknika
Teleavia
Telecorder
Telefunken
Telerent
Telestar
Teletech
Tempest
Tenosal
Tensai
Tevion
Texet
Thomas
Thomson
Thorn
Tisonic
Tivo
TMK
TNIX
Tocom
Tokai
Topline
Toshiba
Tosonic
Totevision
Towada
Toyoda
Tradex
Trakton
Triad
Trix
Uher
Ultra
Ultravox
Unitech
United
Universum
Vector
Vector Research
Vextra
0027, 0064, 0068, 0094,
0099, 0305, 0334, 0620,
0664, 0669, 0808, 0871
0047, 0099
0099
0027, 0064, 0108, 0253
0064, 0065, 0068, 0075
0064, 0375, 0669
0027, 0064
0068
0267
0068, 0305, 0347, 0348,
0411, 0521, 0620, 0669
0253
0064
0027, 0099, 0305
0047
0099
0027, 0099, 0305
0375, 0669
0047, 0305
0027
0068, 0094, 0305, 0347,
0348, 0411, 0521, 0749
0064, 0068, 0131, 0347
0305
0749
0027, 0267
0064
0267
0064, 0099
0375
0027, 0068, 0069, 0070,
0072, 0094, 0108, 0267,
0379, 0411, 0459, 0769
0305
0064, 0267
0099
0305
0108
0047
0305
0064
0267
0047, 0072, 0305
0305
0267
0375, 0769
0027, 0064, 0108, 0131,
0133, 0267, 0375, 1164
0072
0065
0099
Brand Setup Code list for Philips 5-in-1 universal remote control
Victor
Video Concepts
Video Pro
Video Technic
Videomagic
VideoPro
Videosonic
Villain
Wards
Watson
Wharfedale
White Westinghouse
World
XR-1000
XR1000
Yamaha
Yamishi
Yokan
Yoko
Yoshita
Zenith
ZX
0068, 0094, 0411
0072
0047
0027
0064
0047
0027, 0099, 0267
0027
0027, 0064, 0065, 0068,
0069, 0070, 0072, 0074,
0075, 0099, 0108, 0267
0108, 0379, 0669
0620, 0669
0027, 0099, 0305, 0664
0375
0027, 0099
0027, 0099, 0267
0065, 0068
0099, 0305
0099
0047, 0064, 0267
0099
0027, 0061, 0064, 0068,
0305, 0664, 1164
0375, 0379
###### Setup Code For All Digital Video
Disks (Y) ######
3D LAB
4Kus
A-Trend
Aboss
Acoustic Solutions
AEG
AFK
Afreey
Aim
Airis
Aiwa
Akai
AKI
Akira
Akura
Alba
0530, 0566
1185
0741
1125
0740, 0757, 1255
0797, 0815, 0817
1078, 1179, 1225
0725
0699, 0726, 0805, 0860
0699, 1032, 1251, 1277
0560, 0668, 1163, 1270
0638, 0717, 0722, 0732,
0743, 0793, 0797, 0806,
0815, 0817, 0925, 1110,
1142, 1226, 1260, 1276,
1722
0880, 1032
0726
0925, 1078, 1167, 1197,
1198, 1260, 2018
0566, 0699, 0722, 0726,
0740, 0744, 0757, 0810,
1078, 1167, 1722
Brand Setup Code list for Philips 5-in-1 universal remote control
Albatros
Alco
Alize
All-Tel
Allegro
Altacom
Amitech
Amoi
Amoisonic
Amphion Media Works
Amstrad
AMW
Anam
Ansonic
Apex
Apex Digital
Arcam
Aria
Arianet
Ariston
Ariston Acoustics
Aristona
ASCOMTEC
Asono
Atacom
ATD
Audiologic
Audiosonic
Audiovox
Audioworld
Auvio
Awa
Axion
Bang & Olufsen
Baseline
Basic Line
Baze
BBK
Beko
Bellagio
Belson
BenQ
Binatone
Black Diamond
Blaupunkt
Blue Parade
Blue Sky
Boghe
Boman
Bosston
1056
0817
1178
0739
0896
1251
0797, 0811, 0877
0879
0638, 0791, 0862
0899, 1272
0740, 1178
0899, 1272
1940
0786, 0858
0560, 0699, 0744, 1083,
1127, 1942
0699, 0744, 1031, 1083,
1127, 1942
0759
0920
0845, 0920
0700
0700
0673
1950
1251
1251
0745
1828
0717, 1292, 1950
0744, 0817
0817
0870, 1117
0757, 0899
0757
1052
2021
0740, 2021
0925
0889, 1111, 1251
1180
1031, 1272
1130, 1950
1263
1950
0740, 0793, 0860
0744
0598
0678, 0699, 0722, 0726,
0740, 0805, 0817, 0870
1031, 1248
0810, 0925
0804
233
Brainwave
Brandt
Britannia
Broksonic
BskyB
Bush
0797, 1142, 1262
0530, 0578, 0678
0773
0722
2007
0543, 0545, 0699, 0716,
0717, 0726, 0740, 0744,
0750, 0757, 0760, 0805,
0858, 0860, 0906, 1078,
1167, 1722
Byd:sign
0899
C-Tech
1179
California Audio Labs
0517
Cambridge Audio
1111, 1136
Cambridge Soundworks 0717, 0723
Cat
0726, 0813, 0814, 0816,
1042
CCE
0757, 1944
cello
2018
Centrex
0699, 1031, 1942
Centrum
0740, 0806, 0816, 1032,
1254, 1950, 2021
CGV
0760, 0778, 1142
Changhong
0654
Cinea
0858, 0868
Cineral
0757
Cinetec
0740
cineULTRA
0726
CineVision
0860, 0896, 0903
Citizen
1030
Clairtone
0598, 1276
Classic
0757, 1757, 1944
Clatronic
0699, 0815, 0845
Clayton
0740
Coby
0757, 0805, 0879, 1104,
1950
Codex
1260
Compacks
0853, 1125, 1292
Conia
0543, 0699, 0791, 0862,
0879
Continental Edison
0858, 1276
Craig
0858
Creative
0530, 0566
Criterion
2034
CrossWood
1180
Crown
0717, 0740, 0796, 0797,
1142, 1183
Crypto
0909, 1255
Cybercom
0858
CyberHome
0741, 0843, 0901, 1046,
1050
Cyrus
1039
Cytron
0678, 0732, 0743
Durabrand
DVD2000
DVX
EagleTec
Easy Home
eBench
ECC
Eclipse
234
Brand Setup Code list for Philips 5-in-1 universal remote control
D-Vision
Daenyx
Daewoo
Dalton
Dansai
Dantax
Daytek
Dayton
Daytron
DCE
DEC
Decca
Denon
Denver
Desay
Diamond
Digatron
Digihome
digiRED
Digital i
Digital Life
Digitial Life
Digitor
Digitrex
Digix Media
DiK
Dinamic
Disney
DiViDo
DK Digital
DL
DMTech
Dragon
DreamX
DSE
DTS
Dual
1142
0899
0732, 0741, 0797, 0811,
0859, 0860, 0896, 0897,
0899, 1196, 1933, 1945
0813, 1063
0774, 0797, 0810, 1142,
1722
0566, 0740, 0750, 0817
0899, 1032
0899
1067
0858
0805, 0845
0797, 1142
0517, 0661, 1661
0726, 0805, 0815, 0925,
1083, 1110, 1131, 1950
0870, 1117
0678, 0778, 0795, 0817,
1183
1036
0740
0744
0920
0807
0807
0678, 0717, 0860, 1032
0699, 1031, 1083, 1127,
1942
0853
0858
0815
0702
0732
0858, 0867, 1281, 2034
0880
0810, 1124, 2073
0858
1178
0860, 1179, 1757
0826
0678, 0692, 0702, 0740,
0757, 0806, 0810, 0817,
0858, 2034, 2073
0740, 0858, 1030, 1154
0770
0545, 0795
0741
0884
1179
0757
0750, 0778
Electrohome
Elfunk
Elin
Elite
Ellion
Elta
Eltax
Emerson
Encore
Enterprise
Entivo
Enzer
EuroLine
Fenner
Ferguson
Finlux
Fintec
Firstline
Fisher
Fujilink
Funai
Fusion
Futronic
Gateway
GE
General Electric
Giec
Global Solutions
Global Sphere
Go Video
GoldStar
Goodmans
GP Audio
GPX
Gradiente
Graetz
Gran Prix
Grandin
Greenhill
0920, 1030
0740, 0877
0797
1179
0877
0699, 0717, 0797, 0815,
0877, 1142, 1178, 1260,
2018
0793, 1119, 1123, 2014
0618, 0702, 0732
0725
0618
0530, 0566
0728, 0793, 0797, 0811,
1255
0815, 1110, 1142, 1260,
2048
0678, 1056
0678, 0722, 0925, 1722,
1757
0618, 0699, 0768, 0778,
0797, 0810, 1174
0811, 1196
0678, 0740, 0826, 0870,
0896
0697, 1946
0882
0702, 0722
0889
1960
1104, 1185
0549, 0744
0744
1248
0795
1179, 2048
0600, 0744, 0768, 0771,
0810, 0820, 0860, 0896,
1102, 1126, 1185, 1757,
1997
0618, 0768, 0896
0678, 0717, 0740, 0750,
0757, 0810, 0817, 0860,
0906, 1031, 1167, 1248,
1281, 1757, 1950, 2034,
2041
1167
0726, 0796
0517, 0678
0692
0858, 0925
0740, 0743, 1260, 1281
0744
Brand Setup Code list for Philips 5-in-1 universal remote control
Grundig
Grunkel
GVG
H&B
Haaz
Haier
Hanseatic
Harman/Kardon
Haus
HCM
HDT
HE
Henss
Himage
HiMAX
Hiper
Hisense
Hitachi
Hiteker
Hoeher
Home Electronics
Home Tech Industries
Hoyo
Humax
Hypson
Hyundai
ICP
IISonic
Ingelen
Initial
Integra
InterAct
IRT
ISP
Jamo
Jaton
JBL
JDB
Jeken
Jepssen
Jeutech
JMB
JNC
Jocel
0566, 0578, 0678, 0697,
0713, 0722, 0728, 0732,
0740, 0802, 0817, 1031,
1063, 1722, 1757, 1947,
2073
0797, 0817, 1183
1196
0740, 0845, 0868, 0877,
1260, 1262
0778, 1179
0870, 1117
0768, 0810, 0817, 1180
0729
0813, 0876
0815
0732
1190, 1950
0740
0545, 0852, 1187
0870, 1133
1275
0745
0600, 0691, 0692, 0722,
0740, 0884, 1946, 1947,
2021
0699, 1184
0678, 0740, 0853, 0858,
1031, 1251
0757, 0797
1251
0692, 0770
0673
0700
0793, 0810, 0877, 1045,
1183, 1255, 2048, 2073
1180
1188, 1291
0815
0744
0598, 0654, 1661
0724
0810
0722
1063, 2030
0692
0729, 1948, 2005
0757
0726
1277
0804
0722
0699
0807
235
JVC
jWin
Kansas Technologies
Karcher
Kawasaki
KCL
Kendo
Kennex
Kenwood
Kiiro
King DHome
Kingavon
Kiss
KLH
KLH Digital
Kloss
Koda
Koss
Kotron
KXD
Labway
Landel
Lasonic
Lawson
Lecson
Leiker
Lenco
Lenoxx
Lenoxx Sound
Lexia
LG
Lifetec
Limit
Linn
Liquid Video
Lite-On
LiteOn
Lodos
Loewe
Logix
Lumatron
Lunatron
Luxman
Luxor
Magnasonic
Magnat
Magnavox
Magnex
236
0530, 0566, 0650, 0894,
1191, 1928, 1967
1078
1260
0810
0817
1115
0726, 0740, 0858
0740, 0797, 0867, 0925
0517, 0561, 0764, 1090
0797, 0880
0826
0845
0692, 0868, 2030
0744, 0817
0744
0560
1257
0678, 0796, 2007
0878
0884
0558, 0736
0853
0654, 0770, 0816
0743, 0795
0723, 0774, 1560
0899
0678, 0726, 0740, 0797,
0805, 1056
0717, 1154, 1965, 2041
1965, 2041
0726, 0795
0618, 0768, 0774, 0817,
0896, 1933, 2010, 2029
0678, 0858
0743, 0795, 1131
1954
2007
1085, 1185
1085, 1185, 1188
0740
0566, 0768, 0912
0732, 0810, 1128
0722, 0732, 0751, 0768,
0860, 1124, 1142
0768
0600, 1118
0740, 1031, 1722, 1757
0678, 0702, 0796
1950, 2046, 2073
0530, 0566, 0673, 0702,
0740, 0912, 1167
0750
Magnum
Manhattan
Marantz
Maraton
Mark
Marquant
Mastec
Matsui
Maxdorf
Maxim
MBO
McIntosh
MDS
Mecotek
Mediencom
Medion
MEI
Memorex
Memory
Metronic
Metz
MiCO
Microboss
Micromaxx
Micromedia
Micromega
Microsoft
Microstar
Minato
Minax
Minerva
Minix
Minoka
Minowa
Mintaus
Mintek
Mirror
Mitsubishi
Mizuda
Monyka
mp man
MPX
MTlogic
Mustek
Mx Onda
Myryad
Mystral
2041
0732, 0740
0530, 0566, 0702
1184
0740, 0751
0797
1248
0678, 0699, 0722, 0740,
1031, 1722, 1757
0815
0740, 0899
0717, 0757, 1056, 1757,
1944
1560
0740, 0805
0797
0773, 0880
0657, 0678, 0743, 0810,
0858, 0906, 1033, 2034,
2039
0817
0717, 0722, 0858
1110
0717
0552, 0598, 0740
0750, 0778, 1206, 1248,
1250, 1281
0745
1722, 2034
0530, 0566
0566, 1032
0549
0858
0779
0740
0732
1140
0797
0739
1078
0744
0779, 0906
0740
0797, 0845, 0884
0692
1046
0870
1292
0757, 1757, 1944
0678, 0778, 1206, 1250,
1281, 2007
1280, 1281
0858, 1183
Brand Setup Code list for Philips 5-in-1 universal remote control
NAD
Naiko
Nakamichi
NEC
Nesa
Neufunk
Nevir
Next Base
NFREN
NiC
Nikenny
Nikkai
Nintaus
Norcent
Nordmende
Noriko
Nova
Nowa
Nu-Tec
Okano
Olidata
Omni
Onkyo
Oopla
Oppo
Optim
Optimus
Orava
Orbit
Orion
Oritron
Ormond
Otic
P&B
Pacific
Packard Bell
Palladium
Palsonic
Panasonic
Panda
Paramount Pictures
peeKTon
Philco
Philips
Phonotrend
0618, 0719, 0731, 0768
0797, 1031
1226, 1249
0719, 0896, 1945
0744
0692
0797, 0858, 1224
0853, 1067
0853
1150
1291
1950
0820, 1078
0899, 1030, 1292, 1950
0858
0779
1950
0870
0543, 1255
0779
0699
0717, 0725, 0773, 0805,
0860, 0867, 0889, 1131
0530, 0654, 1639, 2012
1185
1251
0774, 0870
0552, 0598
0845
0899
0722, 1260, 1722
0678, 2007
0740
0853
0845
0722, 0740, 0786, 0795,
0817, 0858, 1965
0858
0722, 0806, 1933, 1947,
1956
0699, 0716, 0862, 0879,
1083, 1110
0517, 0530, 0598, 1037,
1932, 1935
0744, 0816
0806
0925, 1067, 1251, 2026
0717, 0760, 0815, 0817,
0889
0530, 0566, 0673, 0702,
0912, 1185, 1839, 1840,
1938
0726
Brand Setup Code list for Philips 5-in-1 universal remote control
Pioneer
Playgo
Plu2
Pointer
Polaroid
Polk Audio
Portland
Powerpoint
Presidian
Prima
Prima Electronic
Primare
Princeton
Prinz
Prism
Proceed
Prodisma
Proline
Proscan
Proson
Prosonic
ProVision
Pye
Pyle
QONIX
Qwestar
Radionette
RadioShack
Raite
Rank Arena
RCA
Realistic
REALmagic
REC
Recco
Redstar
Regent
Reoc
Revoy
Rimax
Rio
Roadstar
Rocksonic
Ronin
Rotel
0517, 0552, 0598, 0658,
1838, 1927, 1992
1292
0877, 1117
0811
1272
0566
0797
0880, 0899
0702
0793, 1255
0793
0913
0701
0858
0732, 0858, 1180
0699
0880
0678, 0699, 0713, 0737,
0860, 1031, 1942
0549
0740
0726, 0779
0726, 0805, 1190, 1950
0673
1036
1078
0678
0768, 0896, 1163, 1933
0598
0692
0807, 1206
0549, 0598, 0731, 0744,
0796, 0817, 1940, 1992
0598
0701
0517, 0716, 0773, 0793
0725
0775, 0786, 0790, 0797,
0815, 0832, 0833, 0925,
1030, 1067, 1950, 2026
1965
0779, 0795
0726, 0868
1263
0896, 2029
0716, 0717, 0726, 0740,
0757, 0845, 0860, 0906,
0925, 1078, 2041
0816
0737, 0899
0650, 1205
237
Rowa
Rownsonic
Saba
Saivod
Salora
Sampo
Samsung
Sansui
Santosh
Sanyo
SAST
Scan
ScanMagic
ScanSonic
Schaub Lorenz
Schneider
Schwaiger
Scientific Labs
Scott
Seeltech
SEG
Semp
Sensory Science
Shanghai
Sharp
Sherman
Sherwood
Shinco
Shinsonic
Sigma Designs
Sigmatek
Siltex
Silva
Silva Schneider
SilverCrest
Simaudio
Singer
Sinotec
Sinudyne
Sistemas
238
0543, 0744, 0786, 0899,
1031, 1184
0816
0578, 0678, 0796
0786, 0858
0768
0725, 0779
0517, 0600, 0771, 0847,
1102, 1955, 1959, 2035
0722, 0743, 0778, 0795,
0811, 1180, 1255, 1257,
1722, 2014, 2048
1142
0697, 0702, 0722, 0740,
0900, 1946
0833
0732, 0862, 0877
0757
1722
0797, 0815, 1142, 1178,
1262
0566, 0678, 0732, 0740,
0806, 0810, 0815, 0817,
0858, 0896, 1128, 1180
0779
0795
0678, 0699, 0745, 0807,
0880, 0908, 1032, 1063,
1260, 1278
1251
0692, 0740, 0790, 0795,
0899, 1945, 2021
0530
1185
0699
0657, 0702, 0740, 0779,
2042
1960
0660, 0744, 0768, 0797,
1104
0744
0560
0701
1251
1251
0815, 0925
0858, 0925, 1174, 2010
1179
0912
0717, 0743, 0778, 0795
0791
1248
0699
Skantic
SKY
Skymaster
Skysonic
Skyworth
Sliding
Slim Art
SM Electronic
SM Electronics
Smart
Sogo
Sonashi
Sonic Blue
Sony
Sound Color
Sound Lab
Soundmaster
Soundmax
Soundwave
Spectra
Standard
Star Clusters
Starlogic
Starmedia
Strong
Sunkai
Sunstech
Sunwood
Superb
Superdigital
Supervision
SVA
Sylvania
Symphonic
Synn
T.D.E. Systems
Tandberg
Tangent
Targa
Tatung
Teac
Tec
Technica
Technics
0566, 0740, 1030
2007
0757, 0795
0793
0793, 0925
1142
0811
0717, 0757, 0795, 1179
0717, 0757
0732, 0740, 0745
0880
0743, 0858
0600, 0810, 0820, 0896,
1126, 1997, 2029
0560, 0600, 0799, 0891,
1097, 1122, 1160, 1560,
1660, 1930, 1960, 2008
1260
1125
0795
0795
0810
0899
0678, 0795, 0815, 0858,
0925
1179, 1254
1032
0845, 0908, 1032, 1045,
1251
0740
0797, 0877
0858
0815, 0925
0882
1214
0795, 1179
0699, 0744, 0887
0657, 0702
0702
0795
1183
0740, 1722, 2021
2014
1254
0797, 0798, 1722
0543, 0598, 0719, 0722,
0744, 0768, 0786, 0795,
0817, 0860, 1033, 1224,
1254, 1956, 1957, 1962,
2011
0925
1124, 1722
0517, 1932
Brand Setup Code list for Philips 5-in-1 universal remote control
Technika
Technisson
Technosonic
Techwood
Tedelex
Telefunken
Teletech
Tensai
TerraTec
Tevion
Thakral
Theta Digital
Thomson
Thule
Thule Audio
Tokai
Tokaido
Tokiwa
Tom-Tec
Tongtel
Top Suxess
Toshiba
Trans Continens
TRANS-continents
Transonic
Tredex
TruVision
Truvox
TSM
Typhoon
TYT
Umax
Unimax
United
Universum
Uptek
upXus
Urban Concepts
Venturer
Vestel
Vieta
Viewmaster
Voxson
0797, 0858, 1124, 1142,
1722
1142
0757, 1078, 1142
0719, 0740
0717, 1031, 1255, 2048
0816, 0817, 0860, 1110,
1255
0740, 0795
0678, 0717, 0797
0852
0678, 0795, 0860, 0925,
1063, 1197, 1254, 1950,
1956, 2041
0728
0598
0549, 0578
1034
1034
0692, 0725, 0811, 0815,
0817, 0925
0725
0743
0816
0791
1251
0530, 0566, 0600, 0722,
1072, 2033
0853
0853, 0858, 0899
0757
0826, 0870
0884
1129
1251
1046
0732
0558, 0717, 1178
0797
0699, 0722, 0757, 0815,
0853, 1110, 1124, 1142,
1255, 2048
0618, 0740, 0768, 0806,
0817, 0896, 1254, 1940,
1945, 1956
0790
1307
0530, 0566
0817
0740, 2021
0732, 1292
0889, 1111, 1251, 1165
0717, 0757, 0858, 2034
Brand Setup Code list for Philips 5-in-1 universal remote control
Vtrek
Waitec
Walkvision
Welkin
Wellington
Welltech
Weltstar
Wesder
Wharfedale
Wilson
Windsor
Windy Sam
WIZE
Woxter
Xbox
Xenius
XLogic
XMS
Xoro
Xwave
Yakumo
Yamada
Yamaha
Yamakawa
Yelo
Yukai
Zenith
Zenix
Zennox
Zeus
Zoece
0909, 1255
1178, 1251, 1260, 1944
0744
0858
0740
1248
0740
0726
0713, 0723, 0725, 0778,
0779, 0817
0858, 1260
0740
0600
1142
0908, 1032, 1178, 1251
0549, 1173
0817
0795, 0908, 1255
0716, 0797, 0815, 1215,
1349
0833, 0856, 1106, 1210,
1248, 1275, 1276, 1277,
1278, 2009
0558, 0736
1031, 1083
0899, 1031, 1083, 1178,
1185
0517, 0566, 0673
0692, 0737, 0792, 0899,
1131
0807
0757, 1757, 1944
0530, 0618, 0768, 0896,
1933
0876
1292
0811, 0878
1292
239
GERMANY / DEUTSCHLAND
Ihre internationale Garantie
Sehr geehrter Kunde,
Produkt entschieden haben. PHILIPS Geräte
entsprechen dem neuesten Stand der Technik und
werden nach strengsten Qualitätsnormen gefertigt.
Sollten Sie ausnahmsweise einen Grund zur
Beanstandung haben, so garantiert PHILIPS - zusätzlich
zu Ihren Gewährleistungsansprüchen gegenüber Ihrem
Verkäufer - innerhalb von 12 Monaten ab Kaufdatum,
daß die Produkte ohne Lohn- und Materialkosten
repariert werden, unabhängig von dem Land, in dem
repariert wird.
Die Ansprüche entsprechend dieser Garantiezusage
setzen voraus, daß das Gerät ordnungsgemäß
entsprechend der Gebrauchsanweisung für seinen
bestimmungsgemäßen Gebrauch verwendet wurde.
Die Garantie wird auf Grund der Vorlage der
Originalrechnung bzw. Zahlungsbestätigung, welche
das Datum des Kaufes und den Namen des Händlers,
sowie die vollständige Geräte-Typ und GeräteNummer zu tragen hat, gewährt.
Die Garantie wird nicht gewährt, wenn:
• Die vorstehend erwähnten Dokumente auf
irgendeine Art geändert oder unleserlich gemacht
wurden.
• Die Geräte-Typ und Geräte-nummer am Gerät
geändert, gelöscht, entfernt oder auf andere Art
unleserlich gemacht wurde.
• Reparaturen, Adaptierungen oder Modifikationen am
Gerät von Personen oder Gesellschaften ohne
entsprechende Befugnis vorgenommen wurden, oder
• aSchäden durch äußere Einflüsse (Blitz,Wasser,
Feuer u. ä.) oder unsachgemäße Behandlung
entstanden sind.
Wir machen Sie darauf aufmerksam, daß das Gerät
nicht als defekt angesehen werden kann, wenn eine
Modifikation oder Adaptierung am Gerät
vorgenommen werden muß, um einen Einsatz des
Gerätes zu ermögliachen, für den das Gerät in seiner
ursprünglichen Spezifikation nicht vorgesehen war
(z.B.:Anpassung an eine andere Empfangs- oder
Anschlußnorm).
Wenn Ihr Philips Markenprodukt nicht
ordnungsgemäß funktioniert, ersuchen wir Sie, sich an
Ihren Philips Händler, eine Philips Vertragswerkstatt
bzw. an eine Werkstatt zu wenden, die bereit ist, die
Garantiereparatur (Lohn- und Materialkosten)
240
kostenfrei durchzuführen. Durch die Inanspruchnahme
der Garantie wird die Garantiezeit weder verlängert
noch wird eine neue Garantiefrist für das Produkt in
Lauf gesetzt. Sollten Sie im Falle eines
Auslandaufenthaltes eine in Ihrer Nähe befindliche
PHILIPS-Händleradresse benötigen, so können Sie
diese bei der Kundeninformation des jeweiligen
Landes erfragen. Die Telefon- oder Faxnummer
können Sie in dieser Broschüre auf der
entsprechenden Länderseite finden.
Um Ihnen unnötige Mühen zu ersparen, empfehlen
wir Ihnen, die Bedienungsanleitung Ihres Gerätes
sorgfältig zu lesen, bevor Sie sich mit Ihrem Händler
oder der Service-Annahmestelle in Verbindung setzen.
Wenn Sie weitere Fragen haben, wenden Sie sich bitte
schriftlich oder telefonisch an die:
Philips Info Center Germany
Alexanderstr. 1
20099 Hamburg.
Phone: 0-180-535 6767
Fax: 0-180-535
Email Address:
Hamburg.Info-Center@hbg.ce.philips.com
The NETHERLANDS / NEDERLAND
Uw internationale garantie
Geachte klant,
Vriendelijk bedankt voor de aankoop van dit Philips
apparaat dat ontwikkeld en gefabriceerd is naar de
hoogst mogelijke kwaliteitseisen. Mocht er
ongelukkigerwijs nog iets fout gaan met dit apparaat,
dan garandeert Philips een kosteloze herstelling (of
vervanging). Dit ongeacht het land waar de herstelling
plaatsvindt en gedurende een periode van 12
maanden vanaf de aankoopdatum.
Deze internationale Philips-garantie is een aanvulling
op de bestaande nationale garantieverplichtingen van
handelaren en Philips in het land van aankoop en tast
uw door de wet bepaalde rechten als klant niet aan.
De Philips-garantie is geldig wanneer het apparaat is
gebruikt in overeenstemming met de
gebruiksaanwijzing en voor het doel waarvoor het
gemaakt is.Tevens dient de originele aankoopbon
(faktuur, kassabon of kwitantie) overlegd te worden
met daarop de aankoopdatum, de naam van de
handelaar en het model- (type) en produktie- (serie)
nummer van het apparaat.
Wij maken u erop attent dat het produkt niet als defect
kan worden beschouwd als wijzigingen of aanpassingen
nodig zijn teneinde het produkt te laten voldoen aan
lokale of nationale technische normen die van kracht
zijn in landen waar het produkt oorspronkelijk niet voor
ontwikkeld of geproduceerd is.
Indien uw Philips apparaat niet goed functioneert of
defect is adviseren wij u contact op te nemen met uw
Philips dealer of een voor Philips werkende
servicewerkplaats. Mocht u service nodig hebben in
een ander land dan kan het Philips Consumenten
Informatie Centrum in dat land u naar de
dichtsbijzijnde Philips handelaar of servicewerkplaats
verwijzen. Het telefoon- en faxnummer vindt u op de
betreffende bladzijde van dit boekje.
Om onnodig ongemak te voorkomen, raden wij u aan
om de gebruiksaanwijzing zorgvuldig te lezen voordat
u contact opneemt met uw handelaar.Voor vragen die
uw handelaar niet kan beantwoorden of voor
aanvullende vragen kunt u zich wenden tot:
ALL OTHER COUNTRIES
International guarantee conditions
This product is guaranteed by Philips for a period of
one year after the date of purchase against defects
due to faulty workmanship or materials.
The guarantee covers both parts and labour.
Service under guarantee is only provided upon
presentation of reasonable evidence (e.g. completed
guarantee card or purchase receipts) that the date of
the claim is within the guarantee period.
The guarantee is not valid if the defect is due to
accidental damage (including in transport), misuse or
neglect and in case of alterations or repair carried out
by unauthorised persons.
The guarantee may not apply if the product requires
modification or adaptation to enable it to operate in
any country other than the country for which it was
designed, manufactured, approved and/or authorised
or if any damage results from these modifications.
Service (during and after guarantee) is available in all
countries where this product is officially distributed
by Philips. In countries where Philips do not distribute
the product, the local Philips Service organisation will
also provide Service although there may be a delay if
the appropriate spare parts and technical manual are
not readily available.
These statements do not affect your statutory rights
as a consumer.
In the event of difficulty please contact the Philips
Information Centre in any country (see enclosed
addresses).
Philips Consumentenlijn Nederland
t.a.v. betreffende afdeling
Postbus 102 5600 AC Eindhoven
Phone: 0900-8407 (0.20 Euros/min)
Fax: (040)-2917206
Email Adress: connect to http://www.philips.nl
Press on Talk button, select the type of product and
press on Talk To, complete all details and click on Send
To Philips.
241
ENGLISH
De Philips-garantie vervalt indien:
• Op een van de genoemde documenten iets is
veranderd, doorgehaald, verwijderd of onleesbaar
gemaakt.
• Het model- (type) of produktie- (serie) nummer op
het apparaat is veranderd, doorgehaald, verwijderd of
onleesbaar gemaakt.
• Reparaties of wijzigingen zijn uitgevoerd door niet
bevoegde service-organisaties of personen.
• Een defect een gevolg is van externe (buiten het
apparaat gelegen) oorzaken, bijvoorbeeld
blikseminslag, wateroverlast, brand, verkeerd gebruik
of onachtzaamheid.
Specifications are subject to change without notice.
Trademarks are the property of Koningklijke Philips Electronics N.V. or their respective owners.
2005 © Koningklijke Philips Electronics N.V. All rights reserved
www.philips.com
3111 176 53294