Canon EF 300mm f/4L IS USM Specification User manual

Add to my manuals
15 Pages

advertisement

Canon EF 300mm f/4L IS USM Specification User manual | Manualzz

10ML_00_EF300 F4L IS_Cover 06.5.25 2:01 PM ページ 2

EF300mm F4L IS USM

Instruction

2

10ML_01_EF300 F4L IS_ENG 06.6.19 5:02 PM ページ 1

Thank you for purchasing a Canon product.

Developed for Canon EOS cameras, the Canon EF 300mm f/4L IS Ultrasonic lens is an interchangeable SLR lens equipped with a dual-mode Image Stabilizer (IS). The Image Stabilizer reduces blur caused by camera shake approximately two full shutter speeds compared to normal handheld shooting.

Features

1. The Image Stabilizer operates by moving optical elements inside the lens. Features include:

• A special mode provided to obtain steadier viewfinder images during panning etc.

• A switch turns the Image Stabilizer circuit on and off.

2. Two UD-glass elements suppress chromatic aberrations for sharp, high-contrast images expected of an L-series lens.

3. Ultrasonic Motor (USM) for quiet autofocusing.

4. Wide focusing ring makes manual focusing easy.

5. Minimum focusing distance of 1.5 m / 4.9 ft.

6. Compatible with Extender EF 1.4

× ll and EF 2× ll.

7. The Image Stabilizer can be used while an Extender is attached (except with certain EOS cameras).

: Warning to prevent malfunction or a flawed photo.

: Helpful tips.

ENG-1

10ML_01_EF300 F4L IS_ENG 06.6.19 5:02 PM ページ 2

a Safety Precautions

(1) Whether it is attached to the camera or not, do not leave the lens under the sun without the lens cap attached.

This is to prevent the lens from concentrating the sun’s rays which can cause a fire.

(2) Do not look at the sun or a bright light source through the lens or camera.

Doing so can result in loss of vision. Looking at the sun through the detached lens is especially hazardous.

ENG-2

10ML_01_EF300 F4L IS_ENG 06.6.19 5:02 PM ページ 3

Nomenclature

Built-in hood

Image Stabilizer mode switch

Distance scale window

Tripod collar index

STABILIZER MODE

1

2

STABILIZER

I O

Focus mode switch

Lens mount index

ENG-3

Focusing ring

Image Stabilizer switch

Tripod collar mount

Distance range limiter switch

Contacts

10ML_01_EF300 F4L IS_ENG 06.6.19 5:02 PM ページ 4

MF

AF

CANON

STABILIZER MODE

STABILIZER

STABILIZER

1. Attaching and

Detaching the Lens

■ Attaching the lens to the camera

1 Remove the lens dust cap by turning it counterclockwise.

2 Align the lens mount index with the red dot on the camera. Then turn the lens clockwise until it locks in place.

3 Remove the lens cap by pressing both clasps.

■ Detaching the lens

Hold down the lens release button on the camera and turn the lens counterclockwise until it detaches.

• After detaching the lens, attach the dust cap to the rear of the lens to protect the electrical contacts and lens surface from scratching.

• If the contacts are dirty, scratched, or soiled with fingerprints, etc., corrosion or a faulty connection or operation may result.

• If the lens surface is dirty, the lens may not autofocus properly.

ENG-4

10ML_01_EF300 F4L IS_ENG 06.6.19 5:02 PM ページ 5

2. Setting the Focus

Mode

To enable autofocus, set the focus mode switch to AF. To focus manually, set the focus mode switch to MF and turn the focusing ring.

3. Switching the

Focusing Distance

Range

One of two focusing distance ranges can be set with the focusing limiter switch: 1.5 m infinity or 3 m - infinity.

• Before switching the focusing distance range from 1.5 m infinity to 3 m - infinity, first turn the focusing ring so that the distance scale index is within 3 m - infinity.

• If the distance scale index is within 1.5 - 3 m and the focusing limiter switch is set to 3 m - infinity, initial autofocusing may cause the lens to first stop at 3 m on the distance scale. This is not a malfunction. If this occurs, press the shutter button again to resume normal autofocusing.

ENG-5

10ML_01_EF300 F4L IS_ENG 06.6.19 5:02 PM ページ 6

4. Macro Mechanism

This lens is equipped with a macro mechanism for low magnification close-up photography. Autofocus function is also possible in the macro range as in normal shooting.

If a picture with maximum magnification and minimum field of view coverage is required in the macro range, set the AF mode to manual, turn the manual focusing ring to the minimum focusing distance in the macro range. Then while looking through the viewfinder, move the camera (or your body) back and forth slowly until the image becomes clear. For the actual maximum magnification and minimum field of view values, please refer to the specifications.

15

5

30

10 ft m

5. Full-time Manual

Focusing

Full-time manual focusing enables you to focus manually even in the autofocus mode.

Set the camera to One-Shot

AF. After focus is achieved, hold down the shutter button halfway and turn the focusing ring to focus manually.

ENG-6

10ML_01_EF300 F4L IS_ENG 06.6.19 5:02 PM ページ 7

STABILIZER MODE

1 2

STABILIZER

I O

6. Using the Image

Stabilizer

1 Turn on ( |) the Image

Stabilizer switch.

2 Set the Image Stabilizer

Mode switch to 1 or 2. (For normal use, set to 1.)

3) Using flash is undesirable.

3 Press the shutter button halfway to activate the

Image Stabilizer.

■ Image Stabilizer Mode 1

Image Stabilizer Mode 1 is especially effective in the following situations:

1) The subject is still.

2) The scene is dark such as at sunset or indoors.

The Image Stabilizer is effective with the following shutter speeds:

Attachments

None

With EF 1.4

× ll

With EF 2 × ll

Shutter Speed

1/30 - 1/125 sec.

1/40 - 1/200 sec.

1/60 - 1/250 sec.

■ Image Stabilizer Mode 2

Use this mode when panning a shot. It helps to steady the image in the viewfinder.

ENG-7

10ML_01_EF300 F4L IS_ENG 06.8.8 10:24 PM ページ 8

• If the camera’s Custom Function is used to alter the AF activation method, the Image Stabilizer will be activated by the altered method.

• Before shooting, look through the viewfinder and check that the image has been stabilized.

• The Image Stabilizer operates normally even with Extender EF 1.4

× ll attached.

• With Extender EF2 × II attached to the lens, the Image Stabilizer will work with the following cameras:

EOS-1Ds Mark II, EOS-1Ds, EOS-1D Mark II N, EOS-1D Mark II, EOS-1D, EOS 5D, EOS 30D, 20D, 20Da, 10D,

DIGITAL REBEL XTi/400D DIGITAL, DIGITAL REBEL XT/350D DIGITAL, DIGITAL REBEL/300D DIGITAL,

D60, D30, EOS DCS1, DCS3, D2000, D6000, EOS-1V/HS, EOS-1N/DP/HS/RS, 3, ELAN 7E/ELAN 7/30/33,

ELAN 7NE/ELAN 7N/30V/33V, ELAN II/ELAN IIE/50/50E, REBEL X/REBEL XS/500, REBEL G/500N, REBEL

2000/300, REBEL Ti/300V, REBEL T2/300X, REBEL K2/3000V, IX, IX Lite/IX7, 3000/88, 5000/888

Notes for Image Stabilizer Mode 1

• The Image Stabilizer may not be effective in the following cases:

1 During camera movement such as panning.

2 During picture-taking on a moving boat, car, etc.

Note for Image Stabilizer Mode 2

• Use this mode only for panned shots, etc. Normally, use Image Stabilizer Mode 1.

ENG-8

10ML_01_EF300 F4L IS_ENG 06.8.7 0:10 PM ページ 9

• Do not turn on ( |) the Image Stabilizer switch when using the camera on a tripod. Doing so may cause Image

Stabilizer misoperation. Turn off the Image Stabilizer before using the camera on a tripod.

• For bulb exposures, turn off ( ○) the Image Stabilizer switch to prevent misoperation.

• With the EOS-1V/HS, 3, ELAN 7E/ELAN 7/30/33, ELAN 7NE/ELAN 7N/30V/33V, ELAN II/ELAN II E/50/50E,

REBEL2000/300, IX, and D30, the Image Stabilizer will not work during self-timer operation.

• If the tripod collar covers the Image Stabilizer switch or Image Stabilizer Mode switch, the switch will be inaccessible. Loosen the tripod collar lock nut and turn the camera to expose the switches.

ENG-9

10ML_01_EF300 F4L IS_ENG 06.6.19 5:02 PM ページ 10

STABILIZER

I O

15 30

5 10 ft m

7. Infinity Compensation Mark

To compensate for shifts in the lens’ infinity position on the distance scale due to temperature changes, the focusing ring can be turned slightly beyond the normal infinity position. In room temperature, the infinity position on the distance scale is indicated by the L symbol which should be aligned with the distance scale index.

To confirm accurate focus, look through the viewfinder.

8. Using the Tripod

Collar

Loosen the tripod collar’s lock nut and turn the camera to switch between horizontal and vertical framing. When detaching the tripod collar from the lens, detach the camera from the lens first.

■ Detaching the tripod collar

1 Detach the lens from the camera.

STABILIZER MODE

1 2

STABILIZER

I O

2 Turn the tripod collar’s lock nut to loosen.

3

Align the tripod collar’s red dot with the lens mount index, then pull the tripod collar as shown by the arrow.

ENG-10

10ML_01_EF300 F4L IS_ENG 06.6.19 5:02 PM ページ 11

2

STABILIZER MODE

1 2

STABILIZER

I O

■ Attaching the tripod collar

1 Detach the lens from the camera.

2 Turn the tripod collar’s lock nut to loosen.

3 Align the tripod collar’s red dot with the lens mount index, then align the tripod collar’s index mark with the lens’ distance scale index.

STABILIZER MODE

2

1

4 Tighten the tripod collar’s lock nut.

1

9. Hood

The hood guards the front part of the lens against rain, snow, dust and stray light which may cause flare and ghost images.

To use the hood, pull it out all the way, then turn it as shown by the arrow to lock it.

To collapse the hood, follow the procedure in reverse.

ENG-11

10ML_01_EF300 F4L IS_ENG 06.7.28 3:53 PM ページ 12

10. Filters

(Sold separately)

The lens accepts up to two screw-on filters.

When a polarizing filter is required, use Canon’s PL-C

77mm II polarizing filter.

• The polarizing filter cannot be used together with a normal filter.

• A polarizing filter attached to the lens cannot be turned while the built-in hood is extended.

11. Extenders (Sold separately)

The lens can be used with Extender EF 1.4

× ll and 2× ll. The lens specifications when an Extender is attached are shown below.

Focal Length

Diagonal Extent

Angle of View Vertical Extent

Horizontal Extent

Max. Magnification

Focus Mode

Aperture Range

With EF 1.4

× ll

420mm

6°10'

3°20'

0.33

×

AF enabled* f/5.6-f/45

With EF 2 × ll

600mm

4°10'

2°20'

3°30'

0.47

×

Manual focus f/8-f/64

* When an Extender EF 1.4

× ll is attached, the AF speed becomes slower to maintain adequate AF control.

• With Extender 2 × ll attached to the lens, only manual focus will be possible. The only exceptions are with the EOS-1V/HS, 3, 1Ds Mark

II, 1Ds, 1D Mark II N, 1D Mark II, and 1D which can still autofocus, but only with the center focusing point.

ENG-12

10ML_01_EF300 F4L IS_ENG 06.8.4 6:46 PM ページ 13

12. Major Specifications

Focal Length and Max. Aperture:

300mm, f/4

Construction:

15 elements in 11 groups

Angle of View (Diagonal, vertical, horizontal extents):

8˚15’, 4˚35’, 6˚50’

Max. Magnification and Picture

Field:

0.24

×, 101 mm × 150 mm (at 1.5 m)

Min. Focusing Distance:

1.5 m / 4.9 ft. (Macro)

Max. Diameter and Length:

90 mm

×221 mm / 3.5×8.7inch

Weight: 1190 g / 2.6 lb.

* The lens length is measured from the mount to the front of the lens. Add 21.5

mm when including the lens cap and dust cap.

* The dimensions and weight are for the lens only.

* With this lens, no compensation is necessary for infrared film.

* Product specifications and the external appearance may be changed without notice.

ENG-13

This device complies with Part 15 of the

FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipmet.

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is conected.

• Consult the dealer or an experienced radio/ TV technician for help.

"This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled "Digital Apparatus",

ICES-003 of the Industry Canada."

10ML_00_EF300 F4L IS_Cover 06.7.31 2:27 PM ページ 1

キヤノン株式会社 http://canon.jp/

キヤノンマーケティングジャパン株式会社

〒108-8011 東京都港区港南2-16-6

CANON INC.

30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

U.S.A.

CANON U.S.A. INC.

One Canon Plaza, Lake Success, NY 11042-1198, U.S.A.

For all inquires concerning this product, call toll free in the U.S.

1-800-OK-CANON

SEQUE Soc. Nac. de Equip., Lda.,

Praça da Alegria, 58, 2°, 1269-149 Lisboa, Portugal

CANON Belgium N.V./S.A.

Bessenveldstraat 7, B – 1831 Diegem, Belgium

CANON Netherland NV

Neptunusstraat 1, 2132 JA Hoofddorp, The Netherlands

CANON LUXEMBOURG S.A.

Rue des Joncs 21, L-1818 Howald, Luxembourg

CANON DANMARK A/S

Knud Hoejgaards Vej 1 DK-2860 Soeborg, Danmark

CANON OY

Huopalahdentie 24 PL 1 00351 Helsinki, Finland

CANON SVENSKA AB

Gustav III:s Boulevard 26 169 88 Solna, Sweden

CANON NORGE as

Hallagerbakken 110, Postboks 33, Holmlia, 1201 Oslo, Norway

CANADA

CANON CANADA INC. HEADQUARTERS

6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada

CANON CANADA INC. MONTREAL BRANCH

5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada

CANON CANADA INC. CALGARY OFFICE

2828, 16th Street, N.E. Calgary, Alberta T2E 7K7, Canada

For all inquiries concerning this product, call toll free in Canada

1-800-OK-CANON

CENTRAL & SOUTH AMERICA

CANON LATIN AMERICA, INC.

703 Waterford Way, Ste. 400 Miami, FL 33126, U.S.A.

EUROPE, AFRICA & MIDDLE EAST

CANON EUROPA N.V.

Bovenkerkerweg 59-61, P.O. Box 2262, 1180 EG Amstelveen, The Netherlands

CANON COMMUNICATION & IMAGE FRANCE S.A.S.

12 Rue de l’Industrie 92414 Courbevoie Cedex, France

CANON UK LTD.

Woodhatch Reigate Surrey RH2 8BF, United Kingdom

CANON DEUTSCHLAND GmbH

Europark Fichtenhain A10, 47807 Krefeld, Germany

CANON ITALIA S.p.A.

Via Milano 8 I-20097 San Donato Milanese, Milano, Italy

CANON Schweiz AG

Geschäftsbereich Wiederverkauf, Industriestrasse 12, CH-8305 Dietlikon,

Switzerland

CANON GMBH

Zetschegasse 11, A-1230 Wien, Austria

CANON España, S.A.

C/Joaquín Costa, 41, 28002 Madrid, Spain

CT1-8505-000 0000Ni0.0

ASIA

CANON (China) Co., Ltd.

15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China

CANON HONGKONG CO., LTD.

19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong

CANON SINGAPORE PTE. LTD.

1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632

CANON KOREA CONSUMER IMAGING INC.

Startower Bldg.17F,737,Yeoksam-Dong, Kangnam-Ku, Seoul, 135-984, Korea

OCEANIA

CANON AUSTRALIA PTY. LTD.

1 Thomas Holt Drive, North Ryde, N.S.W. 2113, Australia

CANON NEW ZEALAND LTD.

Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand

JAPAN

CANON MARKETING JAPAN INC.

16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan

この使用説明書は100%再生紙及び揮発性有機化合物(VOC)

ゼロのインキを使用しています。

© CANON INC. 2002

2006.9.1

PRINTED IN JAPAN

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Lens structure (elements/groups): 15/11
  • Maximum aperture number: 32
  • Closest focusing distance: 1.5 m
  • Auto focus Manual focus

Related manuals

Download PDF

advertisement