Philips AZ1133 MP3 CD Soundmachine

CD Soundmachine
AZ1133
Meet Philips at the Internet
http://www.philips.com
User Manual
Manual do usuário
Manual del usario
W
CLASS 1
LASER PRODUCT
AZ 1133
Printed in China
JH-0615
1
2
7
MP3
1
6
2
7
3
8
4
3
5
MP3
ALBUM
X
4
PROG
9
PHONES
!
AC MAINS~
@
5
MP3
0
110V127V
REPEAT
#
220V240V
6 x R14 • UM-2 • C-CELLS
6
MP3
SHUFFLE
ALL
Mexico
Es necesario que lea cuidadosamente su instructivo de manejo.
PRECAUCIÓN - ADVERTENCIA
No abrir, riesgo de choque eléctrico
ATENCIÓN
Verifique que el voltaje de alimentación
sea el requerido para su aparato
Para evitar el riesgo de choque eléctrico, no quite la tapa.
En caso de requerir servicio, dirijase al personal calificado.
Descripción:
Modelo:
Radio MW/FM con reproductor de CD/MP3
AZ1133/78
Alimentación:
Consumo:
Importador:
Domicilio:
110–127/220–240 V; ~50–60 Hz
18 W
Philips Mexicana, S.A. de C.V.
Av. La palma No. 6
Col. San Fernando la Herradura, Huixquilucan
Localidad y Telefono:
Edo. de México C.P. 52784
Tel. 52 69 90 00
Philips Electronics Hong Kong Ltd.
China
______________________________________
Exportador:
País de Origen:
Nº de Serie:
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO
ANTES DE USAR SU APARATO.
AVISO IMPORTANTE
Philips Mexicana, S.A. de C.V. no se hace responsable por daños o
desperfectos causados por:
– Maltrato, descuido o mal uso, presencia de insectos o roedores
(cucarachas, ratones etc.).
– Cuando el aparato no haya sido operarado de acuerdo con el
instructivo del uso, fuera de los valores nominales y tolerancias
de
las tensiones (voltaje), frecuencia (ciclaje) de alimentación
eléctrica y las características que deben reunir las instalaciones
auxiliares.
– Por fenómenos naturales tales como: temblores, inundaciones,
incendios, descargas eléctricas, rayos etc. o delitos causados por
terceros (choques asaltos, riñas, etc.).
English
Controls/Power Supply
Back/bottom panels (See 1)
Supplied Accessories
– AC power cord
Top/front panels (See 1)
1 Source selector: CD/MP3, FM, MW or
OFF
– selects CD/MP3, FM or MW source of
sound
– power off switch
2 2; – starts or pauses CD/MP3 playback
§∞
– selects the next/previous track
– fast searches forwards/backwards
(press and hold the button)
9 Telescopic antenna – improves FM
reception
0 Battery door – open to insert 6 x 1.5V
R-14/ UM-2/ C-cells
! p – 3.5 mm stereo headphone socket
Helpful hints: The speakers will be muted
when headphones are connected to the set.
•
Incorrect use of batteries can cause
electrolyte leakage and will corrode the
compartment or cause the batteries to burst:
•
Do not mix battery types: e.g. alkaline with carbon zinc. Only use batteries of the same type
for the set.
•
When inserting new batteries, do not try to mix
old batteries with the new ones.
•
@ AC MAINS~ – inlet for power cord
Remove the batteries if the set is not to be used
for a long time.
# Voltage selector – adjust to match the
local voltage 110/220V before plugging in the
set
Batteries contain chemical substances, so
they should be disposed of properly.
CAUTION
Use of controls or adjustments or
performance of procedures other
than herein may result in unsafe
operation.
PROG – programs tracks
9 – stops CD playback;
– erases a CD program
1
Power Supply
4 MODE – selects different play modes:
e.g. REPEAT or SHUFFLE (random
order)
Whenever convenient, use the power supply
cord if you want to conserve battery life.
Make sure you remove the plug from the set
and wall outlet before inserting batteries.
5 ALBUM + – For MP3-CD only: selects
albums
Batteries (not included)
1
7 TUNING – tunes to radio stations
8 VOLUME – adjusts volume level
2
Open the battery door and insert 6 batteries,
type R-14, UM-2 or C-cells, (preferably
alkaline) with the correct polarity as indicated
by the "+" and "–" symbols inside the compartment (See 1).
Basic Operation/ Radio
Basic operation
Switching on and off and selecting the
function
1
To select your sound source, adjust the
Source selector to: CD/MP3, FM,
or MW.
2
To switch off the set, adjust the
Source selector to OFF position.
Adjusting volume
Adjust the sound with the VOLUME control.
Using AC power
2
3 Display – shows the CD functions
6 OPEN•CLOSE – opens/ closes the CD
door
Power Supply
3
Check if the power voltage, as shown on
the type plate located on the
bottom of the set, corresponds to your
local power supply. If it does not, consult your
dealer or service center.
If your set is equipped with a voltage selector, adjust the selector so that it matches
with the local power supply.
Connect the power cord to the
AC MAINS~ inlet and the wall socket.The
set is now connected and ready for use.
4
To switch the set off completely, withdraw the
power cord from the wall socket.
5
Install the unit near the AC outlet and where
the AC power plug can be easily reached.
•
Disconnect the power cord from the wall
socket to protect your set during heavy
thunderstorms.
Replace the battery door, making sure the batteries are firmly and correctly in place.The set
is now ready to operate.
The type plate is located on the
bottom of the set.
–
Helpful hints:
To avoid unnecessary energy consumption,
always adjust the Source selector to OFF
after using the set.
Radio reception
1
Adjust the Source selector to FM or
MW to select your desired waveband.
2
Turn TUNING to tune to a station.
Helpful hints:
•
•
To improve radio reception
For FM, extend, incline and turn the telescopic antenna for best reception. Reduce its
length if the signal is too strong.
For MW, the set uses a built-in antenna.
Direct this antenna for best reception by
turning the whole set.
CD/MP3 Player
About MP3
The music compression technology MP3
(MPEG1 Audio Layer 3) significantly reduce
the digital data of an audio CD while
maintaining CD quality sound.
•
Getting MP3 files: you can either download
legal music files from the internet to your
computer hard disc, or create such files by
converting audio CD files in your computer
through appropriate encoder software.
(128kbps bit rate or higher is recommended
for MP3 files.)
•
Creating a MP3 CD: burn the music files
from your computer hard disc on a CDR or
CDRW using your CD burner.
Helpful hints:
– Make sure that the file names of the MP3 files
end with .mp3.
– Number of albums: maximum 99
– Number of tracks: maximum 400
– The length of file names affects the number of
tracks for playback. With shorter file names,
more files can be burned on a disc.
CD/MP3 Player
1
Adjust the Source selector to CD/MP3.
2
Open the CD door.
3
Insert a CD with the printed side facing up,
then press the CD door gently to close.
➜ Display shows ---, and later the total
number of tracks.
4
Press 2; to start playback.
5
To pause playback, press 2;.
➜ Display: 2 and the current track number
flash (See 2).
6
To resume, press 2; again.
7
To stop playback, press 9.
IMPORTANT!
• CDs encoded with copyright protection
technologies by some record companies may
be unplayable by this product.
1
2
CD play will also stop when:
Selecting a different track
• Press ∞/ § once or repeatedly until the
desired track number appears in the display.
For MP3-CD: First press ALBUM+ once
or more to find your album.
➜ “ALBUM” and the selected album number
will be displayed and flashed briefly
(See 3).
Playing a disc
This player plays Audio Discs including CD-R/
CD-RW, MP3 CD. Do not try to play a CDROM, CD-I, CDV,VCD, DVD or computer
CD.
You may store up to 20 tracks (MP3: 10
tracks) in the desired sequence. If you like,
store any track more than once.
Helpful hints:
– you open the CD door;
– you select FM, MW or OFF;
– the disc has reached the end.
• In the pause/stop position, press 2; to start
playback.
Finding a passage within a
track
1
2
During playback, press and hold ∞ or § .
➜ The CD is played at high speed and with
reduced volume.
When you recognize the passage you want,
release ∞ or § to resume normal playback.
Helpful hints:
– When your searching reaches the end of the
last track, the disc goes to stop mode.
Different play modes:
REPEAT and SHUFFLE
(See 5, 6)
Programming tracks
In the stop position, press PROG to start
programming.
➜ Display shows P01 indicating the start of
the program. PROG flashes (See 4).
REPEAT – plays the current track
continuously.
Press ∞ or § to select your desired track
number.
REPEAT ALL – repeats the entire CD/
program.
For MP3-CD: First press ALBUM + once
or more to find your album.
➜ “ALBUM” and the selected album number
will be displayed and flashed briefly
(See 3).
SHUFFLE – plays all tracks in random
order.
3
Press PROG to store the desired track.
➜ Display shows P02, indicating the next
program location available.
4
Repeat steps 2 to 3 to select and store all
desired tracks.
5
Press 2; to play the program.
➜ “PROG” is displayed.
–
You can play the current track or the whole
disc repeatedly, and combine REPEAT modes
with PROGRAM.
Helpful hints :
If you try to store more than 20 tracks (MP3:
10 tracks), no track can be stored and the
display will show flashing ---.
To erase a program
You can erase a program by:
– pressing 9 (twice during playback or once
in the stop position);
– selecting FM, AM or OFF position;
– opening the disc door.
➜ Display: “PROG” disappears. from the
display.
1
To select play mode, press MODE once or
more.
➜ The display shows the selected mode.
Press 2; to start playback if in the stop/pause
position.
➜ Disc playback will start automactically after
few seconds when shuffle mode is selected.
2
3
–
To return to normal playback, press MODE
repeatedly until the modes are no longer
displayed.
– You can also press 9 to cancel your play
mode.
Helpful hints:
Shuffle play is not available in the program
mode.
Troubleshooting
Maintenance & Safety (See 7)
Safety information
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
•
Place the set on a flat, hard and stable surface
so that the system does not tilt.
WARNING: Do not open the set as there is a risk of electric shock. Under no
•
Do not expose the set, batteries, CDs to
humidity, rain, sand or excessive heat caused
by heating equipment or direct sunlight.
The apparatus shall not be exposed to dripping or splashing.
CD player and CD handling
•
If the CD player cannot read CDs correctly,
use a cleaning CD to clean the lens before
taking the set to repair.
•
The lens of the CD player should never be
touched!
•
Sudden changes in the surrounding
temperature can cause condensation on the
lens of your CD player. Playing a CD is then
not possible. Do not attempt to clean the
lens but leave the set in a warm environment
until the moisture evaporates.
•
•
Always close the CD-tape door to avoid dust
on the lens.
•
•
To clean the CD, wipe in a straight line from
the center towards the edge using a soft,
lint-free cloth. Do not use cleaning agents as
they may damage the disc.
Do not cover the ventilation openings with
items such as newspapers, table-cloths, curtains, etc.
•
No objects filled with liquids, such as vases,
shall be placed on the apparatus.
•
No naked flame sources, such as lighted candles, should be placed on the apparatus.
•
The mechanical parts of the set contain
self-lubricating bearings and must not be oiled
or lubricated.
•
To clean the set, use a dry cloth. Do not use
any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may
harm the housing.
•
Never write on a CD or attach any stickers
to it.
•
Adequate ventilation with a minimum gap of
15cm (6 inches) between the ventilation
holes and surrounding surfaces is necessary
to prevent heat build-up.
circumstances should you try to repair the set yourself, as this will invalidate the guarantee.
Problem
– Possible cause
• Remedy
No hay sonido/energía
– Volume not adjusted
• Adjust the VOLUME
– Power cord not securely connected
• Connect the AC power cord properly
– Batteries dead/ incorrectly inserted
• Insert (fresh) batteries correctly
– Headphones connected to the set
• Disconnect headphones.
– CD contains non-audio files
• Press ∞ , § once or more to skip to a CD audio
track, instead of the data file.
Display does not function properly / No
reaction to operation of any of the
controls
– Electrostatic discharge
• Switch off and unplug the set. Reconnect after a
few seconds
no indication
–
•
–
•
–
•
–
•
No CD inserted
Insert a CD
CD badly scratched or dirty
Replace/ clean CD, see Maintenance
Laser lens steamed up
Wait until lens has cleared
CD-R/CD-RW is blank or not finalized
Use a finalized CD-R/CD-RW or suitable CD
Audio disc only
Note:
Make sure the CD is not encoded with
Copyright protection technologies, as some
do not conform to the Compact Disc standard.
The CD skips tracks
–
•
–
•
CD damaged or dirty
Replace or clean CD
Program/Shuffle is active
Quit program/shuffle mode
Note: A CD badly scratch or dirty may result in
improper operation.
Severe radio hum or noise
– Electrical interference: set too close to TV, VCR or
computer
• Increase the distance
Sound skips during MP3 playback
– MP3 file made at compression level exceeding
320kbps
• Use a lower compression level to record CD
tracks into MP3 format
Poor radio reception
– Disc damaged or dirty
• Replace or clean disc.
Environmental information
All unnecessary packaging material has been omitted.The packaging can be easily separated into three materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging, dead batteries and old equipment.
– Weak radio signal
• FM: Adjust the FM telescopic aerial