Philips AZ5737 DVD CD Soundmachine

AZ5737
DVD Soundmachine
AZ5737_98_IFU
1
23/6/06, 16:24
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reserve engineering or disassembly is prohibited.
Laser safety
This unit employs a laser. Due to possible eye injury, only
a qualified service person should remove the cover or
attempt to service this device.
Class II equipment symbol
This symbol indicates that the unit has
a double insulation system
CAUTION
Use of controls or adjustments or
performance of procedures other
than herein may result in hazardous
radiation exposure or other unsafe
operation.
2
AZ5737_98_IFU
2
23/6/06, 16:24
General Information
Features .................................................................. 4
Discs for playback ................................................ 4
Region codes
Supplied accessories ............................................ 4
Environmental information ................................ 5
Care and safety information .............................. 5
Functional Overview
Controls on the system ...................................... 6
Remote control .................................................... 7
English
Contents
Playing in slow motion mode
Viewing from another angle
Advancing by frames
Playback control (PBC)
Checking the contents of DVD
MP3/Picture Disc Operations
Playing MP3/Picture disc (Kodak, JPEG) ........ 17
MP3/JPEG picture disc ...................................... 17
Kodak picture disc ............................................. 17
DVD Menu Operations
Using the menu bar ........................................... 18
Using the setup menu ................................. 19-22
Connection
Connecting a TV set ............................................ 8
Connecting the power cord .............................. 8
Preparations
Step 1: Inserting batteries into the remote
control .................................................................... 9
Step 2: Setting the TV set ............................. 9-10
Step 3: Setting language preference ................ 10
Basic Operations
Switching on/off the system and selecting
sound source ....................................................... 11
Adjusting volume ................................................ 11
Switching off the volume temporarily..............11
Setting the TV shape
Setting the screen saver
Night mode - turning on/off
Test Tone
Changing the password
Restricting playback by setting parental level
Tape Operation/Recording
Tape playback ...................................................... 23
General information on recording ................. 23
Preparation for recording ................................ 24
Disc synchro recording ..................................... 24
Tuner Operations
Tuning to radio stations .................................... 24
To improve radio reception
Disc Operations
Playing discs ......................................................... 11
Using the disc menu .......................................... 11
Basic playback controls ..................................... 12
Skipping to another title (track)/chapter
To go directly to any title (track)/chapter
Fast search
Continuing playback from the last stop point
Specifications ......................................... 25
Troubleshooting .............................. 26-27
Glossary .................................................... 28
Selecting various mode functions ............. 12-13
Repeat play mode
Shuffle play mode
Repeating a section within a chapter/track
Programing favorite tracks ............................... 13
Special DVD/VCD features ........................ 14-16
Changing subtitle language
Changing the pictures scales
Changing view angle
Changing sound track language
Searching for a particular passage
Displaying the disc information during playback
Moving to another title / chapter
Playing from a selected point
3
AZ5737_98_IFU
3
23/6/06, 16:24
General Information
English
Features
Your DVD Soundmachine with 2.0-channel full
analog amplifier creates the same dynamic sound
qualities that you find in full-fledged cinemas and
incorporates some of the best features in home
theater technology.
Region codes
Other features include:
Night mode
Lets you compress the dynamic range, reducing
the difference in loudness between different
sounds in Dolby Digital mode.
Parental control (rating level)
Lets you set a rating level so that your children
cannot watch a DVD that has a rating higher
than you set.
Discs for playback
Your DVD system will play:
– Digital Video Discs (DVDs)
– Video CDs (VCDs)
– Super Video CDs (SVCDs)
– Digital Video Discs + Rewritable (DVD+RW)
– Compact Discs (CDs)
- Picture (Kodak, JPEG) files on CDR(W)
– Supported MP3-CD format.
• ISO 9660 / UDF format
• Max. title/album name –12 characters
Max. title number plus album is 255.
• Max. nested directory is 8 levels.
• The max. album number is 32.
• The max. MP3 track number is 999.
• Supported sampling frequencies for MP3 disc:
32 kHz, 44.1 kHz, 48 kHz.
• Supported Bit-rates of MP3 disc are: 32, 64,
96, 128, 192, 256 (kbps).
– Following formats can’t be supported
• The files like *.VMA, *.AAC, *.DLF, *.M3U,
*.PLS, *.WAV
• Non-English Album/Title name
• The discs recorded under Joliet format
DVDs must be labeled for ALL regions or for
Region 3 in order to play on this system. You
cannot play discs that are labeled for other
regions.
ALL
Notes:
– For mixed mode discs, only one mode will be
selected for playback according to the recording
format.
– If you are having trouble playing a certain disc,
remove the disc and try a different one. Improperly
formatted discs will not play on this system.
Supplied accessories
–
–
–
–
Composite video cable (yellow)
Audio cables (white, red)
Remote Control
AC power cable
4
AZ5737_98_IFU
4
3
23/6/06, 16:24
Environmental information
Any unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Your system consists of materials which can be
recycled and reused if disassembled by a
specialised company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Care and safety information
●
●
●
●
●
Avoid high temperatures, moisture,
water and dust
Do not expose the system, batteries or discs to
humidity, rain, sand or excessive heat (caused by
heating equipment or direct sunlight). Always
keep disc trays closed to avoid dust buildup on
the lens.
No objects filled with liquids, such as vases, shall
be placed on the apparatus.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
Avoid condensation problem
The lens may cloud over when the player is
suddenly moved from cold to warm
surroundings, making it impossible to play a disc.
Leave the player in the warm environment until
the moisture evaporates.
Do not block the vents
Do not operate the system in an enclosed
cabinet and allow about 15 cm (6 inches) of free
space all around the player for adequate
ventilation.
Cleaning discs
● To clean a CD, wipe it in a
straight line from the center
towards the edge using soft
and lint-free cloth. A cleaning
agent may damage the disc.
● Write only on the printed side
of a CDR(W) and only with a
soft felt-tipped pen.
● Handle the disc by its edge. Do not touch the
surface.
Cleaning the disc lens
● After prolonged use, dirt or dust may accumulate
at the disc lens. To ensure good playback quality,
clean the disc lens with Philips CD Lens Cleaner
or any commercially available cleaner. Follow the
instructions supplied with cleaner.
Finding a suitable location
● Place the player on a flat, hard, stable surface.
Cleaning the head and the tape paths
● To ensure good recording and playback quality,
clean the head A, the capstan(s) B, and
pressure roller(s) C after every 50 hours of tape
operation.
● Use a cotton swab slightly moistened with
cleaning fluid or alcohol.
● You also can clean the head by playing a cleaning
tape once.
Demagnetising the head
● Use a demagnetising tape available at your dealer.
● Don’t expose the system to dripping or
splashing.
● Install this unit near the AC outlet and where the
AC Power can be reached easily.
15 cm
(6 inches)
10 cm
(4 inches)
DVD Mini Hi-Fi System
10 cm
(4 inches)
● The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers table-cloths, curtains, etc.
● When the system is switched to standby mode, it
is still consuming some power. To disconnect the
system from the power supply completely,
remove the AC power plug from the wall
sockets.
Cleaning the cabinet
● Use soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
5
AZ5737_98_IFU
5
23/6/06, 16:24
English
General Information
Functional Overview
English
! @#$
0
9
8
7
6
1
2
3
4
5
(*
Controls on the system
1 LIFT TO OPEN
- to open the disc cover
&
^
9 iR
– point the remote control towards this sensor
0 SOURCE
- to select sound source for functions:
DVD/VCD/MP3/CD, FM, MW,TAPE
2 TUNING
- to tune to a radio station
! STOP 7
- to stop playback or to clear a programme
3 VOLUME
– to adjust master volume level
4 DISPLAY
– to display disc information during disc playback
– to select the slide show mode in playing picture
disc mode
5 MODE
– to select the repeat function in disc mode
6 AUDIO
– to select preferred language for audio
– to select an audio mode when playing a SVCD/
VCD disc with different channels recorded
7 PROG
– in disc mode, to program favorite tracks
8 SEARCH S /T
– in disc mode, press to skip to the previous/next
chapter/track.
– in disc mode, press and hold to fast reverse/
forward the disc
– in JPEG disc mode, press and hold to reduce or
enlarge picture.
PLAY/PAUSE 2;
– to start or interrupt disc playback
– to resume playback from last stop point
ALBUM 5 / 4
– to select previous/nex album in MP3 stop mode
(with MENU ON)
@ Cassette recorder keys
PAUSE ;
- to pause playback or recording
STOP 7 / OPEN0
- to stop the tape
- to open the cassette compartment
SEARCH 1 / ¡
- to fast winds/rewinds tape
PLAY 2
- to start playback
RECORD 0
- to start recording
#$ZOOM-/+
- to reduce or enlarge picture in playing disc mode
% Telescopic aerial
to improve FM reception
^ AC MAINS~
- Socket for power cord
& Voltage selector
- adjusts to match the local voltage 110/220V
before plugging in the set
* Video out
- connects video input jack on the TV
( Audio out
- connects audio input jack on the TV
6
AZ5737_98_IFU
%
6
23/6/06, 16:24
6 S /T
– in disc mode, press to skip to the previous/next
chapter/track.
Remote control
7 PLAY 2
– to start the disc playback
8 PAUSE ;
– to interrupt disc playback or resume playback
from last stop point.
9 GOTO
– to go direct to desired title, chapter or time.
0 AUDIO
– for VCD/SVCD, sets the audio mode ( VCD: left
vocal, right vocal, mono left, mono right or
stereo), (SVCD: AUDIO1, AUDIO2, AUDIO1
VOCAL, AUDIO2 VOCAL)
– for DVD, selects an audio language
! PROGRAM
– in disc mode, to program favorite tracks.
@ SHUFFLE
– to playback in random mode.
# DISPLAY (OSD)
– to display disc information during disc playback
– to select the slide show mode in playing picture
disc mode
Notes:
– The supplied remote control is for dics operation
only.
– First, select the disc (DVD/VCD/MP3/CD) source
on the set, then select the desired function
(S , T or 2 for example).
1
–
2
–
MUTE
disables jor enables sound output
Numeric Keypad (0-9)
to enter a track/title number of the disc.
3 ALBUM +/– to select previous/nex album in MP3 stop mode
(with MENU ON)
4 OK
– to exit or confirm the selection.
5 5 / 4 /A/B
– to select movement direction in disc contents
menu/system menu bar
– in JPEG disc mode, to rotate the picture for
viewing.
– in DVD/MP3/VCD/SVCD/CD disc mode, press
A / B to fast reverse/forward the disc
– moves an enlarged picture up/down/left/right
$ SYSTEM MENU (disc mode only)
– to enter or exit the system menu bar.
% DISC MENU (disc mode only)
– to enter or exit the disc contents menu
– in VCD/SVCD mode, to select PBC ON or PBC
OFF.
^ RETURN TITLE
– to return to main page for VCD
– to return to title menu for DVD
& REPEAT
– to select variations of continuous playback
* REPEAT A-B
– to repeat a specific section within a chapter/track
( SUBTITLE
– to select desired subtitle
) ANGLE
- to select the angles cyclically
¡ STOP 9
– to stop playing the disc.
™ ZOOM +/- to reduce or enlarge picture in playing disc mode
7
AZ5737_98_IFU
7
23/6/06, 16:24
English
Functional Overview
Connection
English
Connecting a TV set
Connecting the power cord
Note:
– Connect the system directly to the TV set.
IMPORTANT!
– If your system is equipped with a
Voltage Selector, set the VOLTAGE
SELECTOR (located on the back of the
set) to match the local power line.
– The type plate is located on the rear
of the set.
IN
OUT
● Use the supplied composite video cable (yellow)
to connect the system’s VIDEO OUT jack to
the video input jack (or labeled as A/V In, Video
In, Composite or Baseband) on the TV set.
● To listen to disc playback of the system through
your TV, use the supplied audio cables to
connect AUDIO OUT jack (black) to the
corresponding AUDIO IN jacks ( red/white) on
the TV set.
COMPONENT
VIDEO IN
AUDIO
OUT
S-VIDEO
IN
Pr/Cr
~ AC MA
INS
Pb/Cb
VIDEO IN
Y
● After everything is connected properly, plug in
the AC power cord to the power socket.
Never make or change any connection
with the power switched on.
Note:
– The set is operated on AC power only.
Notes:
- The type plate is located on the bottom of the
set.
- Never make or change any connection wih the
power switched on.
8
AZ5737_98_IFU
8
23/6/06, 16:24
IMPORTANT!
– Make sure to complete the
preparation procedures before operating
the system.
Step 1: Inserting batteries into
the remote control
3
1
2
1
2
Open the battery compartment.
3
Close the cover.
Place two batteries (Type R06 or AA) in the
compartment with the correct polarity as
indicated by “+” and “–” symbols.
Using the remote control to operate the
system (It is only availible in disc mode)
1
Adjust the source switch to
DVD/VCD/MP3/CD grade.
2
Point the remote control directly
at the remote sensor (IR) on the
front panel.
3
Then select the desired function
(for example S, T or II )
Step 2: Setting the TV set
1
2
IMPORTANT!
– Make sure you have completed all the
necessary connections.
Push the source switch to disc mode.
Turn on the TV set and set to the correct VideoIn channel. You should see the blue Philips DVD
background screen on the TV set.
➜ You may go to channel 1 on your TV set, then
press the channel down button repeatedly until
you see the Video In channel.
➜ Or, you can use the TV remote control to
select different video modes.
➜ Or, set TV to channel 3 or 4 if you are using
an RF modulator.
Selecting the color system that matches
your TV set
This DVD Soundmachine is compatible with
both NTSC and PAL. For the playback of a DVD
disc on this DVD Soundmachine, the color
systems of the DVD, TV set and DVD
Soundmachine should match.
PBC
CAUTION!
– Remove batteries if they are
exhausted or will not be used for a long
time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances,
so they should be disposed of properly.
TV SHAPE
TV SYSTEM
SCR SAVER
AUTO
NTSC
PAL
SET TO NTSC
9
AZ5737_98_IFU
9
23/6/06, 16:24
English
Preparations
Preparations
English
1
In disc mode, stop playback and press SYSTEM
MENU.
2
3
Select
Step 3: Setting language
preference
icon and press 4.
You can select your preferred language settings
so that this DVD Soundmachine will
automatically switch to the language for you
whenever you load a disc. If the language
selected is not available on the disc, the language
set by default will be used instead. But the menu
language of the DVD Soundmachine cannot be
changed once selected.
Press 5 / 4 / A / B keys on the remote
control to toggle through the functions and
select your preferred option.
➜ Move to
and press B.
➜ Move to “TV System” and press B.
AUTO
– Select this if the connected TV set is
compatible with both NTSC and PAL (multi
system). The output format will be consistent
with the video signal of the disc.
PBC
NTSC
– Select this if the connected TV set is NTSC
system. It will change the video signal of a PAL
video disc and output to NTSC system.
4
PAL
– Select this if the connected TV set is PAL
system. It will change the video signal of an
NTSC disc and output to PAL format.
1
In disc mode, stop playback and press SYSTEM
MENU.
Select an item and press OK.
2
3
Select
To remove the menu
Press SYSTEM MENU.
icon and press 4.
Press 5 / 4 / A / B keys on the remote
control to select your preferred option.
➜ Move to
and press B.
➜ Move to one of the following and press B.
– Audio (disc’s soundtrack)
– Subtitle (disc’s subtitles)
– Disc Menu (on screen menu)
4
5
Press 5 / 4 to select a language and press OK.
Repeat steps 3~4 for other settings.
To remove the menu
Press SYSTEM MENU.
10
AZ5737_98_IFU
10
23/6/06, 16:24
Disc Operations
Playing discs
Basic function
Switching on/off the system and selecting
sound source
1
To select your sound source (switch on the
system), adjust the source selector on the set
to: DVD/VCD/MP3/CD, FM, MW, TAPE source.
➜ The system will switch to the selected source.
3
To switch off the system, adjust the source
selector on the set to OFF position and check
the cassette keys are released.
1
Push the souce switch to the disc mode on the
system.
2
Power on the TV system and set to the correct
Video In channel .
➜ You should see the blue Philips DVD
background screen on the TV set.
3
Lift the disc cover to open the disc tray and load
a disc respectively.
➜ Make sure the disc label is facing up. For
double-sided discs, load the side (marked “side
A” or “side B”) you want to play facing up.
4
Press the disc cover to close the disc tray.
➜
will be displayed.
Adjusting volume
● Adjust the volume with VOLUME control.
Switching off the volume temporarily
● In disc mode, press MUTE on the remote
control.
➜ “MUTE” is displayed.
Press MUTE again to cancel the MUTE mode.
● Some discs can play automatically. For discs with
Table Of Contents, a menu may appear on the
TV screen. When the menu is displayed, press
5 / 4 / A / B keys to highlight your selection
and press OK to confirm. To select a play
option, press numeric keys (0-9).
➜ If the disc is locked by parental control, you
must enter your four-digital password .
5
Press 38 on the front panel or PLAY B on
the remote control to start playback.
For MP3
● Load an MP3 disc in the disc tray.
➜ Press DISC MENU to select menu on/off.
IMPORTANT!
– This system is designed for regular
discs.Therefore, do not use any
accessories such as disc stabiliser rings or
disc treatment sheets, etc., as offered on
the market, because they may jam the
disc mechanism.
– Do not move the system during
playback. Doing so may damage the
system.
– Do not put any object other than disc
on the disc tray. Doing so may cause the
system to malfunction.
– DVD discs and players are designed
with regional restrictions. Before playing
a disc, make sure the disc matches the
regional code of your player.
– According to the format requirement
of DVD or VCD, some operations may be
different or restricted.
Notes:
– Load discs with the label side facing up.
– To ensure good system performance, wait until
disc reading is completed before proceeding.
Using the disc menu
For disc with Table Of Contents, a menu may
appear on the TV screen once you load the disc.
To select a playback feature or item
● Press 5 / 4 / A / B or numeric keys (0-9)
on the remote control, then press 38 on the
front panel or PLAY B on the remote control
or OK to start playback.
To access or remove the menu
● Press DISC MENU on the remote control.
11
AZ5737_98_IFU
11
23/6/06, 16:24
English
Basic Opeations
Disc Operations
English
Basic playback controls
To start playback
● Press 38 on the front panel or PLAY B on
the romote control.
To interrupt playback
● Press 38 on the front panel or PAUSE 8 on
the romote control..
● To resume playback, press 38 on the front
panel or PLAY B on the romote control again.
To stop playback
● Press 7.
To cancel the resume mode
● In the stop mode, press 7 again to fully stop the
playback, lift to open the disc cover or adjust
the source switch to other mode ( for example :
FM, MW, TAPE)
Notes:
– Resume information will be erased if you have
changed the disc, opened the disc cover, changed
source or disconnected the system from the power
supply.
– This function is not available for MP3 disc.
Skipping to another title (track) /chapter
Selecting various mode functions
● Press S / T on the front panel or on the
remote control repeatedly during playback to
skip backward or forward. Each press will take
the disc to the beginning of the previous or next
title (track) / chapter.
You can only select the Repeat play mode during
playback.
Note:
– If the player has been set to repeat chapter
(track), pressing this button will replay the same
chapter (track) from its beginning.
To go directly to any title (track) /
chapter
For CD/VCD(PBC off)/MP3
● Use the numeric keys (0-9) to enter the
number of the desired track.
For DVD
● Please see page 15 “Moving to another
title(track)/chapter”.
Fast search
1
Press and hold S / T on the front panel
more than 3 seconds or press A / B on the
remote control to fast reverse or forward the
disc. Repeat the step above to select another
speed number.
2
To resume normal play, press 38 on the front
panel or press PAUSE 8 then press PLAY B
on the remote control.
Continuing playback from the last
stop point
Repeat play mode
For DVD - repeat chapter/title
● Press REPEAT repeatedly to select the
following:
REPEAT CHAPTER ➜ REPEAT TITLE ➜
REPEAT OFF
For SVCD/VCD(PBC off) /CD - repeat
track/disc
● Press REPEAT repeatedly to select the
following:
REPEAT TRACK ➜ REPEAT DISC ➜ REPEAT
OFF
During program playback
● Press REPEAT repeatedly to select the
following:
REPEAT TRACK ➜ REPEAT PROGRAM ➜
REPEAT OFF
For MP3 repeat - track/album/disc
MENU ON:
● Press REPEAT repeatedly to select the
following:
REPEAT TRACK ➜ REPEAT ALBUM ➜ REPEAT
DISC ➜ REPEAT OFF
MENU OFF:
● Press REPEAT repeatedly to select the
following:
REPEAT TRACK ➜ REPEAT DISC ➜ REPEAT
OFF
● In Pre-stop mode and before the disc is
removed, press 38 on the front panel or PLAY
B on the remote control to resume playback
from where you have stopped.
12
AZ5737_98_IFU
12
23/6/06, 16:24
Notes:
– When you open the disc tray, the Repeat
function will be cancelled automatically.
– For SVCD and VCD 2.0 discs, the Repeat
function is not available when the PBC function is
set to ON.
Shuffle play mode
In this mode, all tracks in the current directory
will be played once in a random order.
1
In stop mode (by pressing 9 twice), press
SHUFFLE repeatedly to select the following:
SHUFFLE DISC ➜REPEAT SHUFFLE DISC
➜SHUFFLE OFF
2
Press 38 on the front panel or press PLAY B
on the remote control to start shuffle play.
In shuffle playback mode:
● Press S / T button to select another track
in a shuffle order.
3
Press 9 to stop shuffle playback.
To cancel Shuffle mode:
● Press twice STOP to cancel Shuffle mode.
Notes:
– When the disc cover is opened, the Shuffle
function will be cancelled automatically.
– This function is only available for CD or VCD/
SVCD (PBC OFF).
English
Disc Operations
Programing favorite tracks
You can play the contents of the disc in the
order you want. At most 99 tracks can be
stored.
1
2
3
Load the desired discs on the disc trays.
While playback is stopped (by pressing 9 twice),
press PROGRAM to enter program mode.
➜ “P 00 : 00” is displayed.
Use the numeric keys (0-9) to input the track
number in the order you want.
➜ If you attempt to program more than 99
tracks, “FULL” is displayed.
4 Press OK (or PROGRAM)to store the track.
● Repeat steps 3-5 to store other tracks.
5
Press 38 on the front panel or press PLAY B
on the remote control to play the program.
To Erase program
You can erase program by doing one of the
following:
● During program playback, press 9 twice.
● Select other sources.
● Open the disc door.
➜ “PRG” disappears from the display.
Note:
– This function is not available for DVD or MP3
discs.
Repeating a section within a chapter /
track
1
2
3
You can play a specific section in a chapter/track
repeatedly.
Press REPEAT A-B at your chosen start point.
Press REPEAT A-B again at your chosen end
point.
➜ The passage will now repeat continuously.
To resume normal play, press REPEAT A-B
again.
Note:
– The REPEAT A-B function can only be set within
the same chapter or track.
13
AZ5737_98_IFU
13
23/6/06, 16:24
Disc Operations
English
Special DVD/VCD features
Changing subtitle language
This operation only works on DVDs with
multiple subtitle languages.
● Press SUBTITLE to select the desired
language.
Searching for a particular passage
1
Press and hold S / T on the set (or press A
/ B on the remote control) to select fast reverse
search or fast forward search respectively.
2
Press and hold S / T on the set (or press A
/ B on the remote control) to select the
required search speed:
Changing the picture scales
For DVD or MP3
(reverse): FR X2 p FR X4 p FR X6 p FR X8
p PLAY
(forward): FF X2 p FF X4 p FF X6 p FF X8
p PLAY
This operation only works on VCDs/DVDs/
JPEGs with images.
For VCD/SVCD/DVD:
● Press ZOOM + or ZOOM - to change the
zooming scale:
➜Zooming number will be displayed on the TV
screen.
For JPEG:
In the menu bar (See page 15), select ZOOM
ON in the ZOOM item.
2 Press ZOOM +/- (or press and hold S / T
on the set) to change the picture zooming scale.
● To pan through the enlarged image,press 5 / 4
/ A / B buttons to move the zoomed picture
left, right, up or down.
3 To turn off zooming, select ZOOM OFF in the
ZOOM item in the displayed menu bar.
For SVCD,VCD or CD
(reverse): FR X1 p FR X2 p FR X3 p FR X4
p PLAY
(forward): FF X1 p FF X2 p FF X3 p FF X4
p PLAY
1
Changing view angle
If the playing DVD disc is recorded with multiple
camera angles , the ANGLE mark on the setup
page will be set to ON automatically. This allows
you to view the picture from different angles.
● Press ANGLE buttons to select the desired
angle: 1/4, 2/4, 3/4 or 4/4.
Changing sound track language
This operation only works on DVDs with
multiple audio languages.
● Press AUDIO to select the desired language.
For VCD/SVCD:
● Press AUDIO to select the desired audio
channels for sound. This function is only available
for discs recorded with different channels:
VCD: LEFT VOCAL p RIGHT VOCAL p
MONO LEFT p MONO RIGHT p STEREO
SVCD: AUDIO1, AUDIO2, AUDIO1 VOCAL,
AUDIO2 VOCAL
Note:
– If your desired language is not set in the disc,
you cannot select the language via this function.
3
To resume normal play, press 38 on the system
or press PAUSE 8 then press PLAY B.
Displaying the disc information during
playback
● In disc mode, press DISPLAY repeatedly to select
the following display information:
For DVDs:
TITLE ELAPSED - elapsed playback time of
current title
TITLE REMAIN - remaining time of current
title
CHAPTER ELAPSED - elapsed playback
time of current chapter
CHAPTER REMAIN - remaining time of
current chapter
OFF - turns off the display information
For VCDs (PBC OFF)/ CDs:
SINGLE ELAPSED - elapsed playback time
of current track
SINGLE REMAIN - remaining time of current
track
TOTAL ELAPSED - eslapsed playback time of
disc
TOTAL REMAIN - remaining playback time of
disc
OFF - turns off the display information
14
AZ5737_98_IFU
14
23/6/06, 16:24
Some operations can be carried out
directly via the menu bar on the TV
screen without interrupting disc
playback.
Moving to another title / chapter
Some discs may contain more than one title or
chapter. If the disc has a title or chapter menu
recorded on it, you can start playback from the
selected item.
1
For DVD only
Press GOTO on the remote control to display
the message of title and chapter, use A / B to
highlight an item.
2
Use numeric keys (0-9) to select a desired
title/chapter number.
3
Press OK to start playback.
1
Press SYSTEM MENU.
➜ The menu bar will be displayed across the
top of the TV screen.
2
Press A / B to select:
SETUP MENU p SLOW pZOOM p
ANGLE p STEP p PBC ON/OFF.
3
Press 4 to select your preferred option.
4
To exit, press SYSTEM MENU.
Note:
– Selecting a title or chapter might not be possible
on certain discs.
IMPORTANT!
Some operations may be different or
restricted according to the disc format.
Refer to the jacket or case of the disc you
are playing.
Playing from a selected point
This function allows you to start playback at any
chosen time on the disc.
1
2
Note:
– When you press a button and appears on the
TV screen, this means the function is not available
on the current disc or at the current time.
For DVD
Press GOTO twice to activate time menu.
Enter hours, minutes and seconds from left to
right in the time edit box using the numeric
keys (0-9).
3
Press OK to start playback.
4
For SVCD,VCD (PBC OFF) or CD
Press GOTO to activate time menu,
“GOTO -- : --” will be displayed on the TV screen.
5
Enter minutes and seconds from left to right in
the time edit box using the numeric keys (09).
6
Press OK to start playback.
Note:
– In repeat disc or repeat all mode, you can
search a desired time point.
– This function is not available for MP3 disc.
English
Disc Operations
Playing in slow motion mode
1
1
2
For DVD
Select
from the menu bar and press 4
repeatedly to select the required slow motion
speed:
SF X 2 p SF X 4 p SF X 8 p SR X 2 p SR
X 4 p SR X 8 p PLAY
SF = slow forward
SR = slow reverse
For SVCD or VCD
Press 4 to select the required slow motion
speed:
(forward): SF X 1 p SF X 2 p SF X 3 pPLAY
Press 38 or B to cancel the slow function.
Note:
– This function is not available for CD or MP3
disc.
15
AZ5737_98_IFU
15
23/6/06, 16:24
Disc Operations
English
Checking the contents of DVD
Viewing from another angle
If the playing DVD disc is recorded with multiple
camera angles , the ANGLE mark on the setup
page will be set to ON automatically. This allows
you to view the picture from different angles.
Angle selection is determined by the disc format.
1
Press DISC MENU on the remote control.
➜ If the current title has a menu, the menu will
appear on the screen. Otherwise, the disc menu
will be displayed.
2
Press 5 / 4 / A / B to select the desired title
or chapter, and then press PLAY 3 or OK.
➜ Playback start from the selected title or
chapter.
Press DISC MENU on the remote control to
go to disc menu of the disc.
PBC
3
● Select
from the menu bar and press 4 to
select the desired angle: 1/4, 2/4, 3/4 or 4/4.
➜ Playback changes to the selected angle.
Advancing by frames
1
Select
from the menu bar and press 4 to
play the disc step by step (one frame each step).
2
To resume normal play, press 38.
Note:
– If no title menu or root menu is recorded in the
DVD disc, pressing this button will restart playback
from the first track.
Note:
– This function is not available for CD or MP3
disc.
Playback control (PBC) - 2.0 VCD only
PBC playback allows you to play Video CD
interactively, following the menu on the display.
● Select PBC ON/OFF from the menu bar and
press 4 to toggle between PBC ON and PBC
OFF.
Playing a disc with PBC function
● If PBC OFF, the system will start playback
automatically.
● If PBC ON, the PBC menu (if available) will
appear on the TV screen for selection. Use the
numeric keys (0-9) to enter your choice.
Note:
– This function is not available for DVD, CD or
MP3disc.
16
AZ5737_98_IFU
16
23/6/06, 16:24
Playing MP3/Picture disc (Kodak,
JPEG)
Kodak Picture disc
1
Load a Kodak Picture disc.
➜ The disc reading time may exceed 30
seconds due to complexity of the directory/file
configuration.
2
3
Playback will start automatically.
IMPORTANT!
– You have to turn on your TV set and
set to the correct Video In channel.
MP3/JPEG Picture disc
1
2
Load an MP3/Picture (JPEG) disc.
➜ The disc reading time may exceed 30
seconds due to complexity of the directory/file
configuration.
Press 9.
➜ 9 thumbnail pictures will appear on the TV
screen.
(example for picture disc menu)
Playback will start automatically.
➜ The album/picture menu will appear on the
TV screen. If not, press DISC MENU on the
remote control.
(MP3 disc menu)
1
2
3
4
5
6
7
8
9
SMART
SMAR
T NAVI
NAVI
Root
3
ROO
OOT
T
0
TITLE NAME1
1
TITLE NAME2
2
TITLE NAME3
3
TITLE NAME4
4
TITLE NAME5
5
In STOP mode, press 5 / 4 / A / B on
remote control to select a desired album, then
press OK or PLAY 2 to confirm (for MP3 disc
only).
In STOP mode, press 5 / 4 to select a desired
title, then press OK or PLAY 2 to start
playback.
● You can also use the numeric keys (0-9) to
enter your choice.
5 To stop playback, press 9.
6 Press 5 / 4 on the set to select previous /next
album.
If the MP3 menu is switched off
● You can only play the current title by pressing
PLAY 2. While in playback mode, press S /
T to select the previous/next title.
➜ The title number will appear.
Note:
– No album search function in menu off mode.
7 During JPEG or Kodak Picture disc playback,
press DISPLAY key repeatedly to select
different scan effect. There are 12 types of scan
effect for selection. The selected scan effect will
be displayed on the TV screen.
4
4
Press S / T to view the previous/next
page (if available).
5
Press 5 / 4 / A / B to pan the zoomed
enlarge picture to up / down / left / right, but to
exit the system menu first.
6
Press DISPLAY to select the slide-show mode
to playback.
During playback, you can:
● Press S / T to select another title/picture in
the current folder.
● Press 5 / 4 / A / B on the remote control to
rotate or flip the picture files.
● Press 2; on the system to pause/resume
playback.
Notes:
– Due to the recording nature of Digital Audio
MP3 (DAM), only digital audio music will play.
– It is normal to experience an occasional “skip”
while you are listening to your MP3 discs.
– For multi-session discs with different formats,
only the first session can be read and played.
– DISC MENU does not function during Kodak
Picture disc playback.
17
AZ5737_98_IFU
17
23/6/06, 16:24
English
MP3/ Picture Disc Operations
DVD Menu Operations
English
You can continue some operations directly via
the menu bar on the TV screen without
interrupting the disc playback. But when you
enter
(SETUP MENU), the playback will
pause.
1
Slow Motion
The slow motion speed will display. Press 4
repeatedly to select a reverse or forward
slow motion speed.
To cancel the slow function, press 2;.
ZOOM
Press 4 repeatedly to select an enlarged picture ratio: 1.5, 2 or 3.
To resume normal playback, repeat the above
step to select ZOOM OFF.
ANGLE
Press 4 to view the same scene from different angles if the DVD is recorded with multiangles.
STEP
Press 4 repeatedly to play forward the disc
step by step (one frame every step). To cancel
the step function, press 2;.
PBC PBC
Press 4 to select PBC ON or OFF, and then
playback will automatically start from the
beginning of the disc. (This function is not
available for DVD/CD or MP3 discs.)
x
Using the menu bar
In disc mode, press SYSTEM MENU.
➜ The menu bar will appear across the top of
the TV set screen.
PBC
SETUP MENU
2
Press the 5 / 4 / A / B on the remote
control to navigate in the menu.
➜ Press A / B to move through the menu bar.
➜ Press 4 to enter the selection.
3
Press OK to confirm the selection.
To remove the menu
Press SYSTEM MENU or OK.
IMPORTANT!
– Some operations may be different or
restricted according to the disc format.
Refer to the jacket or care of the disc
you are playing.
– You can change the Subtitle Language
and Audio Language from the menu bar
only on the current disc. But this
operation cannot change the default
preset.
18
AZ5737_98_IFU
18
23/6/06, 16:24
Using the setup menu (user
preference settings)
This DVD setup is carried out via your TV set,
enabling you to customize the DVD Mini Hi-Fi
System to suit your particular requirements.
1
In disc mode, press SYSTEM MENU.
➜ The menu bar will appear across the top of
the TV screen.
2
Select
icon and press 4 to enter the setup
menu. Then press 3 / 4 to select one of the
setup menu options and press B to enter the
menu.
➜ Playback will pause.
PBC
SETUP MENU
Picture Setup
Sound Setup
Language Setup
Feature Setup
3
Press 5 / 4 / A / B on the remote control
to navigate in the menu.
4
Press OK to confirm your selection.
English
DVD Menu Operations
Setting the TV shape
Make sure the format you need is available on
the disc. If not, your setting will be invalid.
4:3PS (Pan and Scan mode)
Select this if you have a conventional TV set and
your DVD is not formatted for wide screen
viewing. A wide picture will display on the whole
TV screen with a portion automatically cut off.
4:3LB (Letterbox mode)
Select this if you have a conventional TV set and
your DVD is formatted for wide screen viewing.
Black bars appear on the upper and lower
portions of the TV screen.
Wide (Wide-screen TV)
Select this if you have a wide-screen TV set (you
must also set your wide screen TV to “full size”).
Removing the menu
Press SYSTEM MENU or OK.
Note:
– Some features of the Setup Menu are described
in “Preparations”.
16:9
(Wide screen)
4:3 LB
(Letter Box)
4:3 PS
(Pan Scan)
19
AZ5737_98_IFU
19
23/6/06, 16:24
DVD Menu Operations
English
Test Tone
Setting the screen saver
ON
If set to ON, the screen saver will be activated
when you leave the system in stop or pause
mode for 5 minutes. The default setting is ON.
OFF
If screen saver set to off, in any status, the screen
saver will not activate.
AUTO
Select this item system will start testing the
speaker from left to right cyclically until you exit
tone test.
Note:
– You can press A to exit test tone mode at any
time.
Night mode - turning on/off
Off
Select this when you want to enjoy the surround
sound with its full dynamic range.
On
Select this to level out the volume. High volume
output will be softened and low volume output
will be brought upward to an audible level. This
feature is only available for movies with Dolby
Digital mode.
20
AZ5737_98_IFU
20
23/6/06, 16:24
Changing the password
You can change the four-digit code used as
Password.
1
2
3
4
Use the numeric keys (0-9) to enter your
four-digit code.
➜ The password supplied by default is 1234.
➜ If you forget the four-digit code, press 9 four
times, the system will change back to the default
password.
5
Enter your new code. Then press the same code
again to confirm.
6
Press SYSTEM MENU again to remove the
menu.
In disc mode, press SYSTEM MENU.
Select
icon and press 4.
Press 5 / 4 / A / B on the remote control
to navigate in the menu.
➜ Move to
icon and press B.
➜ Move to “PASSWORD” and press B.
PBC
21
AZ5737_98_IFU
21
23/6/06, 16:24
English
DVD Menu Operations
DVD Menu Operations
English
Restricting playback by setting parental
level
Some DVDs may have a parental level assigned
to the complete disc or to certain scenes on the
disc. This feature lets you set a playback limitation
level. The rating levels are from 1 to 8 and are
country specific. You can prohibit the playing of
certain discs that are not suitable for your ave
certain discs played with alternative scenes.
4
Use the numeric keys (0-9) to enter the fourdigit code. You may have to enter the same code
twice.
5
Press 3 / 4 to select a rating level between 1-8
and press OK.
➜ DVDs rated above the level you select will
not play unless you enter your four-digit
password or choose a higher level rating. Select
‘No Parental’ to deactivate Parental level and
have all discs play.
PBC
6
1
2
3
In disc mode, press SYSTEM MENU.
Select
icon and press 4.
Use 5 / 4 / A / B on the remote control to
navigate in the menu.
➜ Move to
icon and press B.
➜ Move to “PARENTAL” and press B.
Press SYSTEM MENU again to remove the
menu.
Rating explanations
NO PARENTAL – It will play all discs.
8 ADULT – material for adults only; viewed
only by adults due to graphic sexual scenes,
violence, or language.
7 NC-17 – No children under age 17; not
recommended for children under age 17.
6 PG-R – Parental Guidance – Restricted;
recommended that parents restrict children
under 17 from viewing or allow them to view
only when supervised by a parent or adult
guardian.
4 PG 13 – Material is unsuitable for children
under age 13.
3 PG – Parental Guidance suggested.
1 G – General Audience; recommended as
acceptable for viewers of all ages.
– Menu language
To set the screen display language. The default
setting is English.
– Default
If RESET is selected, all the items in the setup
menu will be reset to default setting, except
Parental Setting and Password.
22
AZ5737_98_IFU
22
23/6/06, 16:24
IMPORTANT!
– Before playing a tape, check and
tighten slack tape with a pencil. Slack
tape may get jammed or may burst in
the mechanism.
– Store tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV set
or speaker).
– In disc mode or tuner mode, tape
playback is not available but record
function is available.
Tape playback
Rewinding or forwarding fast when
playback is stopped
1
Press SEARCH 1 or ¡ on the top of the
system.
2
Press STOP 7 / OPEN 0 when you reach the
desired passage.
General information on
recording
● Recording is permissible insofar as copyright or
other rights of third parties are not infringed.
● For recording, only use tape of IEC type I(normal
tape).
Adjust the source to select the TAPE mode.
● Control tape playback must useing cassette key
on the top of system!
● The recording level is set automatically,
regardless of the position of the Volume, Vocal,
Key control and so forth.
● The type is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for seven seconds.
1
2
Press 0 on the set to open the tape deck door.
3
Adjust source selector on the set to select
TAPE source.
4
Press PLAY 2 on the set to start playback.
Insert a recorded tape and close the tape door.
● Load the tape with the open side up and the full
spool to the right.
● To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
● Press REC in Disc, FM or MW mode, the record
key ● can’t be press if there is no recordable
tape in tape deck.
Interruptting playback
● Press PAUSE ; to interrupt playback.
Stopping playback
● Press STOP 7 / OPEN 0 to stop playback.
23
AZ5737_98_IFU
23
23/6/06, 16:24
English
Tape Operation/Recording
Tape Operation/Recording
English
IMPORTANT!
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
– Recording is possible only in tape deck.
Preparation for recording
1
Load a recordable tape with the open side up
and the full spool to the right.
2
Prepare the source to the recorded.
DVD/VCD/MP3/CD – load the disc(s)
FM or MW – tune to the desired radio station.
1
2
3
When recording is in progress
On the set, select DVD/VCD/MP3/CD, or FM
or MW as desired source.
Start to play the selected source.
Press RECORD ● to start recording.
To stop recording
● Press STOP 7 / OPEN 0 on the set.
Disc synchro recording
1
Select DVD/VCD/MP3/CD on the set.
● You can record programmed tracks in the order
you want.
2 Press RECORD ● to start recording.
1
2
3
Tuner
Tuning to radio stations
1
2
Adjust Source selector to select FM or MW.
Adjust the TUNING knob to tune to a radio
station.
➜ The radio station will be show on the
graduation of reciver.
➜ The graduation is only show the approximate
number of the radio station for your referrence.
To improve radio reception
You can adjust the TUNING slowly to tune to
a radio station until an optimal reception is
found.
● For FM, extend, incline and turn the telescopic
antenna. Reduce its length if the signal is too
strong.
● For MW, the set uses a built-in antenna. Direct
this antenna by turning the whol set.
Notes:
– In tuner mode, remote control and LCD display
is not available.
– The band range is:
MW: 526.5 - 1605.5 KHz
FM: 87.5 - 108 MHz
Selecting another track during recording
Press PAUSE ; to interrupt recording.
Press S / T to select another track.
Press PAUSE ; to resume recording.
To stop recording
● Press STOP 7 / OPEN 0 on the set.
➜ Recording will stop.
IMPOTANT!
The making of unauthorized copies of copyprotected material, including computer
programmes, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal
offence.This equipment should not be used
for such purposes.
24
AZ5737_98_IFU
24
23/6/06, 16:24
AMPLIFIER SECTION
Output power ......................................... 24 W PMPO
L/R ......................................................... 1 W/channel RMS
CD Frequency Response .................................................
.................................................... 100Hz - 10kHz / ± 3 dB
CD Signal-to-Noise Ratio>50dB (A-WEIGHED)
Output Sensitivity
Line Out(1kHz 0dB) .................................... 2± 0.2V
TUNER SECTION
Tuning Range ...........................................................................
............................................................ FM 87.5 – 108 MHz
................................................. MW 526.5 – 1605.5 kHz
Signal-to-Noise Ratio ................................. FM≥ 50 dB
........................................................................... MW ≥ 30 dB
TAPE SECTION
Frequency Response
Normal tape ............... 125 Hz - 8 kHz / ± 4 dB
Signal-to-Noise Ratio
Normal tape .................................................... ≥ 45 dB
JIS and WTD .................................................... ≤ 0.35%
MAIN UNIT
Power Supply Rating ...... 110 - 127 / 220 - 240 V
........................................................... 50/60HZ Switchable
Power Consumption
Active ........................................................................ 15 W
Dimensions (w × d × h)400× 242.5 × 169 (mm)
Weight .......................................................................... 3.9 kg
Packaging Dimensions (w × d × h) .............................
.............................................................. 458x280x210(mm)
Gross weight .............................................................. 3.06kg
SPEAKERS
Impedance ........................................................................ 8 Ω
Speaker drivers ................... full range 4’’ 1 w/ shield
Specifications subject to change without prior
notice
DVD SECTION
Laser Type ................................................ Semiconductor
Video Decoding ........................... MPEG-2 / MPEG-1
Video DAC ................................................................ 10 Bits
Signal System ............................................... PAL / NTSC
Video Format ..................................................... 4:3 / 16:9
Video S/N ........................................... 56 dB (minimum)
Composite Video Output .................. 1.0 Vp-p, 75Ω
25
AZ5737_98_IFU
25
23/6/06, 16:24
English
Specifications
Troubleshooting
English
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or service center.
Problem
Solution
No power.
“
” is displayed.
No picture on TV screen.
No colour on TV
Distorted or poor picture.
The aspect ratio of the screen
cannot be changed even though
you have set the TV shape.
The DVD player does not
start playback.
– Check if the AC power cord is properly
connected.
– Insert a disc.
– Check if the disc is inserted upside down.
– Wait until the moisture condensed at the lens
has cleared.
– Replace or clean the disc, see “Maintenance”.
– Use a readable disc or correctly recorded format
MP3-CD.
– Select the appropriate video input mode on the
TV set.
– Check if the TV set is switched on.
– Check the video connection.
– Check if the system is securely connected.
– TV has a colour system standard. If the disc’s or
DVD system’s colour system is different than
your TV’s colour system, the picture may be
distorted or colourless.
– Change the system t the respective PAL or
NTSC setting.
– Sometimes a slight picture distortion may appear.
This is not a malfunction.
– Clean the disc.
– The aspect ratio is fixed on the DVD disc.
– The aspect ratio may not be changed for some
TV systems.
– Check the source switch on the disc mode.
– Insert a readable disc.
– Check the disc type, color system and region
code.
– Clean the disc.
– Place the disc with the playback side down.
– Press SYSTEM MENU to turn off the setup
menu.
– Cancel the parental control rating function or
change the rating level.
– Moisture has condensed inside the system.
Remove the disc and leave the system turned on
for about an hour.
26
AZ5737_98_IFU
26
23/6/06, 16:24
The system does not respond
when the buttons are pressed.
The language subtitle cannot be
changed when playing a DVD.
Sound cannot be heard or is of
poor quality
Poor radio reception.
Recording or playback cannot be made
The tape deck door cannot open
The remote control does not
function.
– Confirm the source switch location. Some
buttons/knob/keys are available only in the
related mode (for example cassette recorder
keys is available only in TAPE mode.).
– Disconnect the power plug from the jack, and
insert again.
– Multi-language subtitle is not recorded on the
DVD.
– Changing the language for subtitle is prohibited
on the DVD.
– Adjust the volume.
– If the system is in pause, slow motion or fast
forward/reverse mode, press 2; to resume the
normal play mode.
– Make sure the MP3-CD was recorded within 32256 kbps bit rate with sampling frequencies at 48
kHz, 44.1 kHz or 32 kHz.
– If the signal is too weak, adjust the antenna
for better reception.
– Increase the distance between the System and
your TV set or VCR.
– Clean deck parts, see “Maintenance”.
– Use only NORMAL tape.
– Apply a piece of adhesive tape over the missing
tab space.
– Remove and reconnect the AC power plug and
switch on the system again.
– The remote control is available in disc mode only.
– Point the remote control at the remote control
sensor of the unit.
– Reduce the distance to the player.
– Remove any possible obstacles.
– Replace the batteries with new ones.
– Check that the batteries are loaded correctly.
27
AZ5737_98_IFU
27
23/6/06, 16:24
English
Troubleshooting
Glossary
English
Aspect ratio: The ratio of vertical and
horizontal sizes of a displayed image. The
horizontal vs. vertical ratio of conventional TVs. is
4:3, and that of wide-screens is 16:9.
AUDIO OUT Jacks: Jacks on the back of the
DVD System that send audio to another system
(TV set, Stereo, etc.).
Bit Rate: The amount of data used to hold a
given length of music; measured in kilobits per
second, or kbps. Or, the speed at which you
record. Generally, the higher the bit rate better
the sound quality. However, higher bit rates use
more space on a Disc.
Chapter: Sections of a picture or a music
piece on a DVD that are smaller than titles. A
title is composed of several chapters. Each
chapter is assigned a chapter number enabling
you to locate the chapter you want.
Disc menu: A screen display prepared for the
selection of images, sound, subtitles, multi-angles,
etc recorded on a DVD.
JPEG: A still-picture data compression system
proposed by the Joint Photographic Expert
Group, which features small decrease in image
quality in spite of its high compression ratio.
MP3: A file format with a sound data
compression system, “MPE” is the abbreviation of
Motion Picture Experts Group 1 (or MPEG-1)
Audio Layer 3. Through the MP3 format, one
CD-R or CD-RW can contain about 10 times as
much data volume as a regular CD can.
Parental control: A function of the DVD to
limit playback of the disc by the age of the users
according to the limitation level in each country.
The limitation varies from disc to disc; when it is
activated, playback will be prohibited if the
software’s level is higher than the user-set level.
Playback control (PBC): Refers to the signal
recorded on video CDs or SVCDs for
reproduction control. By using screen menus
recorded on a Video CD or SVCD that supports
PBC, you can enjoy interactive-type software as
well as software having a search function.
Region code: A system allowing discs to be
played only in preset regions. This unit will only
play discs that have compatible region codes. You
can find the region code of your unit from the
product label. Some discs are compatible with
more than one region (or ALL regions).
Title: The longest section of a picture or music
feature on DVD, music, etc., in video software, or
the entire album in audio software. Each title is
assigned a title number enabling you to locate
the title you want.
VIDEO OUT jack: Jack on the back of the
DVD System that sends video to TV.
28
AZ5737_98_IFU
28
23/6/06, 16:24
AUSTRALIA - Philips Manufacturers Warranty for Australia only
These warranty conditions are valid for the
following consumer electronics products:
Colour Televisions, Projection TV, Plasma &
LCD TV, Video Cassette Recorders, CD
Recorders & Players, DVD Players, DVD
Recorders, Audio Systems, Home Theatre
systems & Portable Audio.
The benefits given to the purchaser by this
warranty are in addition to all other rights
and remedies which the purchaser has in
respect of the product under the Trade
Practices Act or other Commonwealth or
State Law.
Philips Consumer Electronics warrants its products
to the purchaser as follows and subject to the stated
conditions.
3 Years free Repair Service - at Philips ASC
Colour Television, Plasma Television, LCD Television,
Projection Televsion, DVDR/VCR Combo, DVD
Recorder, DVD Recorder with Hard Drive, LCD
Projectors, Wireless Audio Systems
1 Year free Repair Service - at Philips ASC
Audio Systems & Home Theatre Systems.
1 Year free Replacement – at your Retailer
Portable Audio, MP3 Infotainment products, Video
Cassette recorders, DVD Player, DVD/VCR Combo
Player, Portable DVD/LCD player.
Conditions of Repair Warranty
1. All claims for warranty service should be made to
your nearest Philips Authorised Service Centre.
Reasonable evidence of date of purchase must be
provided.
2. This warranty extends only to defects in material or
workmanship occurring under normal use of the
product when operated in accordance with the
instructions.
3. If a replacement product is supplied under the repair
policy it is warranted, under this warranty, for the
remainder of the warranty of the original purchased
product only.
4. Home service is provided only within the normal
service area of one of our recommended Authorised
Service Centres (ASC). It will be provided for
television receivers only, regardless of size or type
(i.e. CRT, LCD, PTV, PDP). All other products are to
be taken or sent by the consumer to the workshop
of your nearest ASC (at the Consumer’s expense).
5. This Manufacturers Warranty is limited to 3 months
for above listed Consumer Electronics products if
used in commercial applications.
This warranty does not cover:
a) Mileage or travel outside the normal service area
covered by selected Authorised Service Centre.
b) Service costs arising from failure to correctly
adjust the controls of the product or to observe the
instructions, or inspections that reveal that the
product is in normal working order.
c) Product failures caused by misuse, neglect,
accidental breakage, transit damage, inexpert repairs
or modification by un-authorised persons, external
fires, lightning strikes, floods, vermin infestation or
liquid spillage.
d) Cleaning of video or audio heads.
e) Inadequate receiving antennae.
f) Replacement of worn or used batteries or other
consumables.
g) Consumer products used in commercial
applications (This warranty is limited to 3 months
only).
h) Second hand products.
The conditions contained in this warranty
card replace and override the provision of
the Philips World-Wide Guarantee for
products purchased in Australia and used in
Australia.
Service is provided through more than 100
accredited Authorised Service Centres throughout
Australia. For direct contact with the nearest
recommended Authorised Service Centre in capital
& regional cities/towns
Authorised Service Centre Network
1300 361 392
Customer support is provided in Australia by our
trained call centre staff. For assistance with product
features and specifications, please call
Technology Care Centre
1300 363 391
Please record the following information for
your records and keep in a safe place.
We recommend retaining your purchase
receipt to assist with any warranty claim.
Model number:....................................................
Serial number:....................................................
Date of purchase:....................................................
Retailer:....................................................
6. Philips may, at its discretion choose to replace rather
than repair any product covered by this warranty.
7. This Manufacturers Warranty is neither transferable
nor valid in countries other than Australia.
Philips Consumer Electronics
a division of Philips Electronics Australia Limited
ABN 24 008 445 743,
Level 1, 65 Epping Road NORTH RYDE NSW 2113
Warranty valid for all new products purchased after 1st April 2006
AZ5737_98_IFU
29
23/6/06, 16:24
New Zealand - Guarantee and Service for New Zealand
Thank-you for purchasing this quality Philips
product.
Philips New Zealand Ltd guarantees this product
against defective components and faulty
workmanship for a period of 12 months. Any
defect in materials or workmanship occurring
within 12 months from the date of purchase
subject to the following conditions will be
rectified free of charge by the retailer from whom
this product was purchased.
1.
Conditions
The product must have been purchased in New
Zealand. As proof of purchase, retain the original
sales docket indicating the date of purchase.
2.
The guarantee applies only to faults caused by defective components, or faulty workmanship on
the part of the manufacturer.
3.
The guarantee does not cover failures caused by
misuse, neglect, normal wear and tear, accidental
breakage, use on the incorrect voltage, use contrary to operating instructions, or unauthorised
modification to the product or repair by an
unauthorised technician.
4.
Reasonable evidence (in the form of a sales
docket) must be supplied to indicate that the
product was purchased no more than 12 months
prior to the date of your claim.
5.
In the event of a failure, Philips shall be under no
liability for any injury, or any loss or damage
caused to property or products other than the
product under guarantee.
How to claim
Should your Philips product fail within the
guarantee period, please return it to the retailer
from whom it was purchased. In most cases the
retailer will be able to satisfactorily repair or
replace the product.
However, should the retailer not be able to
conclude the matter satisfactorily, or if you have
other difficulties claiming under this guarantee,
please contact
The Guarantee Controller
Philips New Zealand Ltd.
4 P.O. Box 41.021
Auckland
3 (09) 84 94 160
fax 3 (09) 84 97 858
This guarantee does not prejudice your rights
under common law and statute, and is in addition
to the normal responsibilities of the retailer and
Philips.
AZ5737_98_IFU
30
23/6/06, 16:24
English
Meet Philips at the Internet
http://www.philips.com
AZ5737
CLASS 1
LASER PRODUCT
Printed in China
AZ5737_98_IFU
31
PDCC-JH-0625
23/6/06, 16:24