Philips MCM276R MP3/WMA Micro Hi-Fi System

Micro Hi-Fi System
MCM276R
Philips vous remercie de
votre confiance.
Gracias por escoger Philips
Read your Quick Use Guide and/or
Owner's Manual first for quick tips
that make using your Philips product
more enjoyable.
If you have read your instructions
and still need assistance,
you may access our online help at
Besoin d'une aide
rapide?
Necesita ayuda
inmediata?
Les Guide d'utilisation rapide et Manuel de
l'utilisateur regorgent d'astuces destinées à
simplifier l'utilisation de votre produit Philips.
Toutefois, si vous ne parvenez pas à résoudre
votre probléme, vous pouvez accéder à
notre aide en ligne à l'adresse
www.philips.com/usasupport
www.philips.com/usasupport
Lea primero la Guía de uso rápido o el
Manual del usuario, en donde encontrará
consejos que le ayudarán a disfrutar
plenamente de su producto Philips.
Si después de leerlo aún necesita ayuda,
consulte nuestro servicio de
asistencia en línea en
Thank you for choosing Philips.
Need help fast?
or call
ou formez le
www.philips.com/usasupport
1-888-PHILIPS (744-5477)
while with your product.
(and Model / Serial number)
1-800-661-6162 (Francophone)
1-888-PHILIPS (744-5477) (English speaking)
Veillez à avoir votre produit à
portée de main.
(et model / serial nombre)
1-888-PHILIPS (744-5477)
y tenga a mano el producto.
(y número de model / serial)
P001-P031_MCM276R_37_Eng
1
o llame al teléfono
2006.7.26, 15:14
Philips
MCM276R
Note : This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures :
– Relocate the receiving antenna.
– Increase the separation between the equipment and receiver
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT !
modifications not authorized by the manufacturer may void users authority to operate this device.
Remarque : Cet équipement a été testé et a été certifié conforme aux limites imposées pour un
appareil numérique de Classe B, conformément à la partie 15 des réglements FCC. Ces limites sont
définies aux fins d'assurer une protection raisonnable contre les interférences nuisibles dans une
installation résidentielle. Cet équipement génère, utilise et émet des fréquences radio qui, en cas d'une
mauvaise installation ou d'une utilisation non-conforme aux instructions de ce manuel d'utilisation
peuvent causer des interférences nuisibles aux communications radio. Il n'y a toutefois aucune garantie
que des interférences nuisibles ne se produiront pas dans une installation donnée. Si cet équipement
cause des interférences nuisibles avec votre poste radio ou de télévision, ce que vous pouvez déterminer
en éteignant et en rallumant votre équipement, il est conseillé à l'utilisateur d'essayer de pallier à ces
interférences nuisibles en prenant l'une ou l'autre des mesures suivantes:
– Changez la position de l'antenne de réception.
– Augmentez la séparation entre l'équipement et le récepteur.
– Branchez l'équipement sur une source d'alimentation différente de celle sur laquelle le récepteur est
branché.
– Consultez votre distributeur ou un technicien qualifié en la matière pour assistance.
IMPORTANTE !
las modificaciones no autorizadas por el fabricante pueden anular la autoridad de los usuarios para
utilizar este aparato.
Nota : Este aparato ha sido probado y cumple con los límites correspondientes a un aparato digital de Clase
.
B, según la parte 15 de las Normas
FCC. Estos límites han sido diseñados para facilitar suficiente protección
frente a interferencias perjudiciales en una instalación residencial. Este aparato genera, utiliza y puede emitir
energía de frecuencias de radio y, si no se instala y utiliza según el manual de instrucciones, puede provocar
interferencias perjudiciales en las comunicaciones de radio. Sin embargo, no existe garantía de que las
interferencias no ocurrirán en una instalación particular. Si este aparato provoca interferencias perjudiciales en
la recepción de radio o television, que se puede identificar encendiendo y apagando el aparato,
recomendamos al usuario que intente solucionar las interferencias siguiendo una o más de las siguientes
medidas:
– Cambie la posición de la antena receptora.
– Aumente la separación entre el aparato y el receptor.
– Conecte el aparato a una toma de un circuito diferente al que está conectado el receptor.
– Consulte con el distribuidor o un técnico de radio/TV con experiencia para que le ayuden.
¡IMPORTANTE!
modificações não autorizadas pelo fabricante, podem causar danos na operação deste aparelho.
2
P001-P031_MCM276R_37_Eng
2
2006.7.26, 15:14
8
1
2
7
6
3
5
4
9
0
!
@
%
#
$
3
P001-P031_MCM276R_37_Eng
3
2006.7.26, 15:14
4
P001-P031_MCM276R_37_Eng
4
2006.7.26, 15:14
IMPORTANT SAFETY INSTRUCTIONS
Clean only with dry cloth.
materials
Class II equipment symbol
This symbol indicates that the unit has
a double insulation system
5
P001-P031_MCM276R_37_Eng
5
2006.7.26, 15:14
Canada
English:
This digital apparatus does not exceed
the Class B limits for radio noise
emissions from digital apparatus as set
out in the Radio Interference
Regulations of the Canadian
Department of Communications.
Français:
Cet appareil numérique n'emet pas de
bruits radioélectriques dépassant les
limites applicables aux appareils
numériques de Class B prescrites dans
le Règlement sur le Brouillage
Radioélectrique édicté par le Ministère
des Communications du Canada.
CAUTION
Use of controls or adjustments or
performance of procedures other
than herein may result in hazardous
radiation exposure or other unsafe
operation.
ATTENTION
L'utilisation des commandes ou
réglages ou le non-respect des
procédures ci-incluses peuvent se
traduire par une exposition
dangereuse à l'irradiation.
ATENCIÓN
El uso de mando o ajustes o la
ejecucción de métodos que no sean
los aquí descritos puede ocasionar
peligro de exposición a radiación.
6
P001-P031_MCM276R_37_Eng
6
2006.7.26, 15:14
English
Index
Français
English ------------------------------------------------ 8
Español
Français -------------------------------------------- 36
Español --------------------------------------------- 64
7
P001-P031_MCM276R_37_Eng
7
2006.7.26, 15:14
3140 115 xxxxx
Contents
English
General Information
CD
Supplied accessories ............................................ 9
Environmental information ................................ 9
Safety information ................................................ 9
Discs for playback .............................................. 19
Playing discs ................................................... 19-20
Selecting and searching ..................................... 20
Selecting a different track
Finding a passage within a track during playback
Controls
Controls on the set ........................................... 10
Remote control ............................................ 11-12
Installation
Placing MCM276R .............................................. 12
Mounting stand onto the set
Mounting MCM276R onto walls
Rear connections ......................................... 13-14
Programming tracks ........................................... 21
Reviewing the program
Erasing the program
Different play modes: REPEAT, SHUFFLE ...... 22
Display track information
(MP3/WMA only) ............................................... 22
Tuner
Tuning to radio stations .................................... 23
Programming radio stations ............................. 23
Speaker connections
Antenna connections
Connecting an additional appliance .......... 14-15
Connecting a USB device
Connecting a docking cradle
Autostore: Automatic programming
Manual programming
To listen to a preset station
Using AC power ................................................. 15
USB
Preparations
Using the remote control ................................ 16
Setting the clock ................................................. 16
Using a USB mass storage device ............. 24-25
Playing a USB mass storage device
Dock (optional)
Basic Functions
Switching on/off the set and
selecting functions .............................................. 17
Switching between Standby and
ECO POWER mode .......................................... 17
Auto-standby ....................................................... 17
Volume control ................................................... 18
Volume adjustment
MUTE
Sound control ..................................................... 18
DSC
DBB
Compatible portable players ........................... 26
Selecting the correct dock adaptor ............... 26
Setup ..................................................................... 27
Playing an iPod/GoGear portable player ....... 27
Charging iPod battery using the dock ........... 27
Timer
Setting the timer ................................................. 28
Activating and deactivating TIMER ................. 28
SLEEP
Displaying the clock ........................................... 18
................................................................................ 28
Specifications ........................................... 29
Maintenance .............................................. 29
Troubleshooting .............................. 30-31
How to mount your MCM276R
onto walls ..................................................... 32
8
P001-P031_MCM276R_37_Eng
8
2006.7.26, 15:14
Supplied accessories
–
–
–
–
–
–
Safety Information
2 speaker boxes including 2 speaker cables
remote control (with 1 x CR2025 battery)
MW loop antenna
FM wire antenna
stand
mounting kit
Environmental Information
All unnecessary packaging has been omitted. We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Your system consists of materials which can be
recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
● Place the system on a flat, hard and stable
surface.
● Place the system in a location with adequate
ventilation to prevent internal heat build-up in
your system. Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.
● The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc.
● Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.
● No naked flame sources, such as lighted candles,
should be placed on the apparatus.
● No objects filled with liquids, such as vases, shall
be placed on the apparatus.
● If the system is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens of the disc
unit inside the system. Should this occur, the CD
player would not operate normally. Leave the
power on for about one hour with no disc in the
system until normal playback is possible.
● The mechanical parts of the set contain selflubricating bearings and must not be oiled or
lubricated.
● When the system is switched to Standby
mode, it is still consuming some power.
To disconnect the system from the
power supply completely, remove the AC
power plug from the wall socket.
The set complies with the FCC-Rules,
Part 15 and with RSS-210 of Industry
Canada.
Operation is subject
to the following two conditions:
1. this device may not cause harmful
interference, and
2. this device must accept any interference
received, including interference that may
cause undesired operation.
The set complies with the FDA/DHHS Rule
21 CFR Subchapter J in effect at Date of
Manufacture
9
P001-P031_MCM276R_37_Eng
9
2006.7.26, 15:14
English
General Information
Controls
English
Controls on the set (illustrations
on page 3)
1 STANDBY-ON
–
–
–
2
–
–
3
–
4
–
5
–
6
7
–
–
press briefly to switch the set on or off (standby/
ECO POWER);
In standby or Eco Power mode: press and
hold to toggle between Standby and ECO
POWER mode (power-saving mode)
Red indicator: lights up red when the set is
switched to ECO POWER mode
SOURCE
selects sound source CD, USB,TUNER or
DOCK
In standby or Eco Power mode: switches the
set on and selects sound source CD, USB,
TUNER or DOCK
IR
sensor for the infrared remote control
Helpful hints: Always point the remote control
towards this sensor.
PUSH OPEN
push to unfold or fold the control panel
CD OPEN • CLOSEç
opens/closes the CD door
CD door
VOLUME
adjusts the volume level
Clock/Timer: adjusts the hours and minutes
8n
–
9
–
–
–
–
–
0
–
!
–
3.5 mm headphone socket
Helpful hints:
– Adjust the volume to a moderate level
before you plug in the headphones.
– Connecting headphones will switch off the
speakers.
ALBUM/ PRESET + /CD/USB: selects albums (for MP3/WMA only)
TUNER: selects a preset radio station
4 / ¢
CD/USB: skips or searches CD tracks/titles
backwards/forwards
Tuner: tunes to radio stations
ÉÅ
CD/USB: starts or pauses playback
DBB (Dynamic Bass Boost)
turns the bass enhancement on/off
DSC (Digital Sound Control)
selects predefined sound settings: ROCK,
JAZZ, POP, CLASSIC
@ PROGRAM
–
–
#
–
$
–
CD/USB: programs tracks
Tuner: programs preset radio stations
STOP
CD/USB: stops playback; erase a program
DOCK terminals
connects to a DC276 docking cradle
%
–
jack for the external USB mass storage device
Hearing Safety
Listen at a moderate volume.
● Using headphones at a high volume can impair
your hearing. This product can produce sounds
in decibel ranges that may cause hearing loss for
a normal person, even for exposure less than a
minute. The higher decibel ranges are offered
for those that may have already experienced
some hearing loss.
● Sound can be deceiving. Over time your hearing
"comfort level" adapts to higher volumes of
sound. So after prolonged listening, what sounds
"normal" can actually be loud and harmful to
your hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
To establish a safe volume level:
● Set your volume control at a low setting.
● Slowly increase the sound until you can hear it
comfortably and clearly, without distortion.
Listen for reasonable periods of time:
● Prolonged exposure to sound, even at normally
"safe" levels, can also cause hearing loss.
● Be sure to use your equipment reasonably and
take appropriate breaks.
●
●
●
●
●
Be sure to observe the following
guidelines when using your headphones.
Listen at reasonable volumes for reasonable
periods of time.
Be careful not to adjust the volume as your
hearing adapts.
Do not turn up the volume so high that you
can't hear what's around you.
You should use caution or temporarily
discontinue use in potentially hazardous
situations.
Do not use headphones while operating a
motorized vehicle, cycling, skateboarding, etc.; it may
create a traffic hazard and is illegal in many areas.
10
P001-P031_MCM276R_37_Eng
10
2006.7.26, 15:14
Remote control
English
Controls
DOCK
/
%
1
2
3
$
4
5
#
@
!
0
9
6
7
8
–
selects DOCK source
–
In standby or Eco Power mode: switches the
set on and selects DOCK source
3 VOLUME +/–
adjusts the volume level
–
Clock/Timer: adjusts the hours and minutes
4 TIMER
–
–
–
displays the timer setting
switches the timer on/off
enters the timer setting mode (press and hold
for more than 2 seconds)
5 SLEEP
–
set the sleep timer
6 MUTE
–
switches the sound off temporarily
7 RDS/NEWS
–
Notes for remote control:
– First select the source you wish to
control by pressing one of the source select
keys on the remote control (for example
CD,TUNER).
– Then select the desired function (for
example ÉÅ, 4 , ¢).
no function on this set
8 SHUFFLE
–
selects random playback
9 REPEAT
–
selects continuous playback
0 DSC (Digital Sound Control)
–
1B
selects predefined sound settings: ROCK,
JAZZ, POP, CLASSIC
press briefly to switch the set on or off (standby/
ECO POWER);
In standby or Eco Power mode: press and
hold to toggle between Standby and ECO
POWER mode (power-saving mode)
Source buttons
! DBB (Dynamic Bass Boost)
# DISPLAY/CLOCK
–
–
USB
selects USB source
In standby or Eco Power mode: switches the
set on and selects USB source.
–
–
CD
selects CD source
In standby or Eco Power mode: switches the
set on and selects CD source.
–
–
2
–
–
TUNER
selects TUNER source and toggles between the
wavebands: FM and AM
In standby or Eco Power mode: switches the
set on and selects TUNER source
–
turns the bass enhancement on/off
@ PROGRAM
–
CD/USB: programs tracks
–
Tuner: programs preset radio stations
–
Clock: - displays the set time
- In standby mode: enters the clock
setting mode (press and hold for more
than 2 seconds)
–
TUNER/Audio CD: switches between clock
display and playback
display
–
MP3/WMA files: displays disc information
during playback
11
P001-P031_MCM276R_37_Eng
11
2006.7.26, 15:14
Controls
Installation
–
–
–
–
With the detachable stand and by-packed wall
mounting kit, MCM276R allows you to place it in
two ways: on desktops with stand or on
walls without stand.
ALBUM/ PRESET 3 / 4
CD/USB: selects the next/previous album (for
MP3/WMA only)
TUNER: selects a preset radio station
ÉÅ
CD/USB: starts or pauses playback
9
CD/USB: stops playback; erase a program
% OPEN • CLOSEç
–
Placing MCM276R
Mounting stand onto the set
1
2
MCM276R is equipped with a stand. To mount
the stand onto the set,
Put MCM276R on a flat and firm surface, rear
side facing up.
As shown, align the stand to the slots at set’s
bottom, 4 FRONT facing down
opens/closes the CD door
PRESS
FRONT
3
PRESS
–
/ ¢
CD/USB: skips or searches CD tracks
backwards/forwards
Tuner: tunes to radio stations
FRONT
English
$4
–
Push the stand down into the slots
➜ When the stand is in place, you will hear a
click
Mounting MCM276R onto walls
See Appendix: How to mount your
MCM276R onto walls to learn more about
wall mounting.
12
P001-P031_MCM276R_37_Eng
12
2006.7.26, 15:14
English
Installation
FM wire
antenna
AM loop
antenna
Speaker
(right)
Speaker
(left)
AC power cord
Rear connections
Warning:
– Never make or change connections with
the mains supply switched on.
– Install your set near the AC outlet and
where the AC power plug can be reached
easily.
A Speaker connections
Use the supplied speakers only. Using other
speakers can damage the set or the sound
quality will be negatively affected.
B Antenna connections
AM antenna
1
Assemble the loop antenna as shown:
● Connect the cable of the left speaker to LEFT
(red and black) and the cable of the right
speaker to RIGHT (red and black) as follows:
a. Press the clip of the red terminal and fully
insert the stripped portion of the colored (or
marked) speaker cable into the socket, then
release the clip
b. Press the clip of the black terminal and fully
insert the stripped portion of the black (or
unmarked) speaker cable into the socket, then
release the clip
13
P001-P031_MCM276R_37_Eng
13
2006.7.26, 15:14
Installation
English
Or
Insert the loop antenna into the slot on the set
Connecting an additional
appliance
1
2
3
Connecting a USB device or memory
card
By connecting a USB mass storage device
(including USB flash memory, USB flash players
or memory cards) to the Hi-Fi system, you can
enjoy the device’s stored music through the
powerful speakers of Hi-Fi system.
Check you have unfolded the control panel
Fit the plug of the loop antenna to
AM ANTENNA as shown below
Adjust the position of the antenna for optimal
reception (as far away as possible from the TV,
VCR or other radiation sources)
AM
ANTENNA
2
Insert the USB device’s USB plug into the socket
on the set ‘s foldable control panel
FM antenna
The wire antenna supplied can only be used to
receive nearby stations. For better reception we
recommend using a cable antenna system or an
outdoor antenna.
1
2
3
Extend the wire antenna and fit it to FM
ANTENNA as shown below
Note: If you are using a cable antenna system or
an outdoor antenna, fit the antenna plug, instead of
the wire antenna, to FM ANTENNA .
Move the antenna in different positions for
optimal reception (as far away as possible from
the TV, VCR or other radiation sources)
or
for the devices with USB cable:
a. Insert one plug of the USB cable (not
supplied) to the socket
on the set ‘s
foldable control panel
b. Insert the other plug of the USB cable to the
USB output terminal of the USB device
or
for the memory card:
a. Insert the memory card into a card reader
(not supplied)
b. Use a USB cable (not supplied) to connect
the card reader to the socket
on the
set ‘s foldable control panel
Fix the antenna’s end to the wall
14
P001-P031_MCM276R_37_Eng
14
2006.7.26, 15:14
English
Installation
Connecting a docking cradle
See “Dock (optional)” for details.
Using AC power
1
2
Make sure all the connections have been made
before switching on the power supply
Connect the AC power cord to the wall socket.
This switches on the power supply
When MCM276R is switched to standby, it is still
consuming some power. To disconnect the
system from the power supply completely,
remove the power plug from the wall
socket.
The type plate is located on the rear of the
set.
Warning!
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
CAUTION
Visible and invisible laser radiation. If the
cover is open, do not look at the beam.
High voltage! Do not open. You run the risk
of getting an electric shock.
The machine does not contain any userserviceable parts.
Modification of the product could result in
hazardous radiation of EMC or other
unsafe operation.
15
P001-P031_MCM276R_37_Eng
15
2006.7.26, 15:14
Preparation
English
Using the remote control
Setting the clock
IMPORTANT!
After connecting MCM276R to the power
supply, set the clock first.
– Remove the
protective plastic tab
before using the
remote control.
1 Press and hold STANDBY-ON to switch the
– Always point the
remote control directly
towards IR area.
Notes for remote control:
– First select the source you wish to
control by pressing one of the source select
keys on the remote control (for example
CD,TUNER).
– Then select the desired function (for
example ÉÅ, 4 , ¢).
To replace the remote controls’
battery
1
2
3
4
Press and hold 1 as indicated.
Simultaneously, pull the battery tray at 4.
Remove the old batter y and put a new CR2025
battery in place.
set to Standby mode
➜ The display shows the set time
➜ -- --:-- -- flashes by default if you have not set
the clock
2 In the standby mode, press and hold DISPLAY/
CLOCK on the remote control
➜ SET CLOCK scrolls on the display
➜ 24 HR or 12 HR appears for the initial
clock setting. To select 24-hour clock or
12-hour clock,
● On the remote control, press VOLUME +/once or more (or turn VOLUME on the
set)
● On the remote control, press DISPLAY/
CLOCK to confirm
➜ The hours digits start flashing
3 Hold down or press VOLUME +/- repeatedly
to set the hours (or turn VOLUME on the
set)
4
5
Put back the battery tray.
6
2
Helpful hints:
– The clock setting will be erased when the system
is disconnected from the power supply.
– The set will exit from the clock setting mode if
no button is pressed within 90 seconds.
1
➠
3
CR 2
02
5
LI
TH
Press DISPLAY/CLOCK to confirm
➜ The minutes digits start flashing
Hold down or press VOLUME +/- repeatedly
to set the minutes (or turn VOLUME on the
set)
Press DISPLAY/CLOCK to confirm
– To exit without storing the clock setting press
STOP 9
IUM
/
CAUTION!
– Remove the battery if it is exhausted
or will not be used for a long time.
– Batteries contain chemical substances,
so they should be disposed of properly.
16
P001-P031_MCM276R_37_Eng
16
2006.7.26, 15:14
English
Basic Functions
Switching on/off the set and
selecting functions
1
2
3
To switch on, press STANDBY-ON or
SOURCE on the set (or y on the remote
control)
➜ The set switches to the last source selected
OR
On the remote control, press the source button
(e.g. USB, CD, TUNER, DOCK)
When the set is on, press STANDBY-ON to
switch off (or y on the remote control)
To select your function, press SOURCE once
or more on the set (or USB, CD, TUNER,
DOCK on the remote control)
Helpful hints:
– In the standby/Eco power mode, the tone, sound
settings, tuner presets and the volume level (up to
a maximum volume level of 20) will be retained in
the set’s memory.
Auto-standby
When the set has reached the end of CD
playback and remains in the stop position for
more than 15 minutes, the set will switch off
automatically to save power.
/
Helpful hints:
– You can also switch on the set by pressing
CD OPEN • CLOSEç
Switching between Standby and
ECO POWER mode
1
When the set is switched off, press and hold
STANDBY-ON to switch between Standby
and ECO POWER mode (or y on the remote
control)
In ECO POWER mode (power-saving mode):
➜ ECO PWR scrolls on the display
➜ The display is switched off
➜ The Red indicator lights up
In Standby mode: ➜ The clock is displayed
17
P001-P031_MCM276R_37_Eng
17
2006.7.26, 15:14
Basic Functions
English
Volume control
Sound control
Volume adjustment
● Adjust the volume by using the VOLUME
rotary on the set or by pressing VOLUME +/on the remote control
➜ VOL and the actual value (between 1 and 31)
are displayed
➜ VOL MIN is the minimum volume level
➜ VOL MAX is the maximum volume level
DSC
Digital Sound Control enables you to select
predefined sound settings.
●
Press DSC repeatedly to select the desired
sound setting: ROCK, JAZZ, POP, CLASSIC
/
DBB
1
2
MUTE
You can temporarily switch off the sound
without switching off the set.
Press MUTE on the remote control to switch
off the sound
➜ MUTE appears. Playback continues without
sound
To switch on the sound, you can:
– press MUTE again;
– adjust the volume controls;
– change source
● Press DBB (Dynamic Bass Boost) once or
more to switch bass enhancement on or off.
➜ DBB appears if DBB is activated
Displaying the clock
● During playback, press DISPLAY/CLOCK on
the remote control repeatedly to switch
between the clock display and the playback
display.
Notes:
– When playing MP3 files, you will get track
information (ID3 tag) by pressing DISPLAY/
CLOCK.
18
P001-P031_MCM276R_37_Eng
18
2006.7.26, 15:14
IMPORTANT!
– Make sure that the file names of MP3 files end
with .mp3.
– For DRM protected WMA files, use Windows
Media Player 10 (or later) for CD burning/
conversion. Visit www. microsoft.com for details
about Windows Media Player and WM DRM
(Windows Media Digital Rights Management).
Discs for playback
With this system, you can play
– all pre-recorded audio CDs (CDDA)
– all finalized audio CD-Rs and CD-RWs
– MP3/WMA-CDs (CD-Rs/CD-RWs with
MP3/WMA files)
Playing discs
1
IMPORTANT!
– This system is designed for regular
discs. Therefore, do not use any
accessories such as disc stabilizer rings or
disc treatment sheets, etc.
2
Press SOURCE once or more to select CD (or
CD on the remote control)
➜ The CD icon
appears
Press CD OPEN•CLOSEç to open the CD
compartment.
➜ OPEN is displayed
About MP3/ WMA
The music compression technology MP3
(MPEG1 Audio Layer 3) and WMA (Windows
Media Audio) significantly reduces the digital data
of an audio CD while maintaining CD quality
sound.
Windows Media Audio® is a registered
trademark of Microsoft Corporation.
Supported formats:
– Disc format ISO9660, Joliet, UDF (created on
Adaptec Direct CD) and multi-session CDs
– MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
– Directory nesting up to a maximum of 8
levels
– Max. track number plus album: 500
– WMA v9 or earlier
The system will not play or support the
following:
• Empty albums: an empty album is an album
that does not contain MP3/WMA files, and will
not be shown in the display.
• Non-supported file formats are skipped. This
means that e.g.: Word documents .doc or MP3
files with extension .dlf are ignored and will not
be played.
• DRM protected WMA files
• WMA files in Lossless or VBR format
3
Insert a disc with the printed side facing up.
Press CD OPEN•CLOSEç again to close the
compartment
➜ READING is displayed as the CD player scans
the contents of a disc
➜ Audio CD: the total number of tracks and
playing time are shown
MP3/WMA: Display shows current album
number “A x x “and current track number
“T x xx”
19
P001-P031_MCM276R_37_Eng
19
2006.7.26, 15:14
English
CD
CD
English
Helpful hints:
– If you have not organized MP3/WMA files into
any albums on your disc, an album “00” will be
automatically assigned for all those files.
4
Press ÉÅ to start playback
➜ Display shows current track
number and elapsed playing time
Selecting and searching
Selecting a different track
● Press 4 / ¢ once or repeatedly until the
desired track number appears in the display
MP3/WMA: ➜ Track information scrolls briefly
MP3/WMA:
● Press ALBUM/ PRESET once or more to
select the next or previous album
➜ Track information scrolls briefly
or
● In the stop position, press ALBUM/ PRESET
and 4 / ¢ to select the desired album
and track
➜ MP3/WMA: Display shows current album/
track number
5
6
To pause playback, pressÉÅ. To resume
playback, press the button again
To stop playback, press STOPÇ
Helpful hints:
CD playwill also stop when
– the CD door is opened
– the disc has reached the end
– you select another source: TUNER, USB or
DOCK
Finding a passage within a track
during playback
1
2
During playback, press and hold 4 / ¢
➜ The CD plays at a high speed
When you recognize the passage you want,
release 4 or ¢
➜ Normal playback resumes
/
20
P001-P031_MCM276R_37_Eng
20
2006.7.26, 15:14
Programming tracks
1
You may store up to 40 tracks in the desired
sequence. If you like, store any track more than
once.
In the stop position, press PROGRAM to start
programming
➜
flashes
➜ Audio CD: Display shows PROG and current
track number
MP3/WMA: Display shows current album/
track number
English
CD
Helpful hints:
– The set will return to the stop position if no
button is pressed within 90 seconds.
disappears. To resume programming, press
PROGRAM.
– MP3/WMA: When playing a program, use of
ALBUM/ PRESET are void.
Erasing the program
You can erase the contents of the memory by:
● Press STOP 9
– once if in the stop position;
– twice during playback;
● Press STANDBY-ON y
● Select another sound source
● Open the CD door
➜
disappears. CLEAR scrolls
2
Press 4 / ¢ once or repeatedly until the
desired track number appears in the display
● MP3/WMA: press ALBUM/ PRESET and
4 / ¢ to select the desired albumand
track
3 Press PROGRAM to confirm
➜ Display shows briefly the number of tracks
programmed
➜ Then, the display shows the track number
you just stored
4
5
Repeat steps 2-3 to select and store all desired
tracks.
➜ FULL is displayed if you attempt to program
more than 40 tracks
Press ÉÅ play the program
21
P001-P031_MCM276R_37_Eng
21
2006.7.26, 15:14
CD
English
Different play modes: REPEAT,
SHUFFLE
REPEAT TRACK– plays the current track
continuously
REPEAT ALL– plays the entire disc/program
continuously
SHUFFLE – plays all the tracks of the CD in
random order
1
2
During playback, press once or more REPEAT
or SHUFFLE to select play modes
To return to normal playback, press REPEAT or
SHUFFLE repeatedly until the various modes
are no longer displayed
Display track information
(MP3/WMA only)
The ID3 tag is part of an MP3/WMA file and
contains various track information such as the
track´s title or the artist´s name.
● During playback, press DISPLAY/CLOCK
repeatedly on the remote control
➜ Display show title name, album name and ID3
tag information
Helpful hints:
- Complete the ID3 tag information with
your MP3/WMA encoder software before
burning the MP3/WMA-CD.
Helpful hints:
– In the shuffle mode, press ¢ to select tracks.
22
P001-P031_MCM276R_37_Eng
22
2006.7.26, 15:14
Tuning to radio stations
1
2
Press SOURCE once or more to select
TUNER (or TUNER on the remote control)
Press TUNER on the remote control
repeatedly to select your desired waveband, FM
or AM
➜ Display shows:
, radio station
frequency, waveband and if programmed, a
preset number
1
Press the ALBUM/ PRESET buttons once or
more to select the preset number where
programming should start.
Note:
– If no tuner preset number is selected, default is
preset 1 and all your presets will be erased.
2
/
Press and hold PROGRAM until AUTO
appears
➜
flashes
➜ Available stations are programmed:
FM stations followed by AM stations
➜ After all stations are stored, the last preset
station will then be played
Manual programming
1
2
3
3
4
Press and hold 4 / ¢ until SEARCH
appears
➜ The radio automatically tunes to a station
with sufficient reception. Display shows SEARCH
during automatic tuning
➜ FM: If a station is received in stereo,
is
shown
Repeat step 3 if necessary until you find the
desired station.
● To tune to a weak station, press 4 / ¢
briefly and repeatedly until you have found
optimal reception.
4
5
Tune to your desired station (see Tuning to
radio stations)
Press PROGRAM to activate programming
➜
flashes
Press ALBUM/ PRESET to allocate a number
from 1 to 40 to this station.
Press PROGRAM to confirm
➜ Display shows the preset number, waveband
and the frequency of the preset station
Repeat steps 1-4 to store other stations
● You can erase a preset station by
storing another frequency in its place
To listen to a preset station
● Press the ALBUM/ PRESET buttons once or
more until the desired preset station is displayed.
Programming radio stations
You can store up to a total of 40 radio stations
(FM and AM) in the memory, manually or
automatically (Autostore).
Autostore: Automatic programming
Automatic programming will star t from preset 1
or a chosen preset number. From this preset
number upwards, former programmed tuner
stations will be erased. The set will only program
stations which are not in the memory already.
23
P001-P031_MCM276R_37_Eng
23
2006.7.26, 15:14
English
Tuner
USB
English
Using a USB mass storage device
By connecting a USB mass storage device to the
Hi-Fi system, you can enjoy the device’s stored
music through the powerful speakers of Hi-Fi
system.
Playing a USB mass storage device
Compatible USB mass storage devices
With the Hi-Fi system, you can use
– USB flash memory (USB 2.0 or USB1.1)
– USB flash players (USB 2.0 or USB1.1)
– memory cards (requires an additional card
reader to work with this Hi-Fi system)
Note:
– In some USB flash players (or memory
devices), the stored contents are recorded using
copyright protection technology. Such
protected contents will be unplayable on any
other devices (such as this Hi-Fi system).
How to transfer music files from PC to a
USB mass storage device
By dragging and dropping music files, you can
easily transfer your favorite music from PC to a
USB mass storage device.
For the flash player, you can also use its music
management software for the music transfer.
However, those WMA files may be
unplayable for compatibility reasons.
How to organize your MP3/WMA files
on the USB mass storage device
This Hi-Fi system will browse the MP3/WMA
files in the folders/sub-folders/titles order.
Example:
Root
Title 001
Title 002
Title 003
Album 01
Supported formats:
– USB or memory file format FAT12, FAT16,
FAT32 (sector size: 512 - 2,048 bytes)
– MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
– WMA v9 or earlier
– Directory nesting up to a maximum of 8
levels
– Number of albums/ folders: maximum 99
– Number of tracks/titles: maximum 999
– ID3 tag v2.0 or later
– File name in Uicode UTF8 (maximum length:
128 bytes)
The system will not play or support the
following:
• Empty albums: an empty album is an album
that does not contain MP3/WMA files, and will
not be shown in the display.
• Non-supported file formats are skipped. This
means that e.g.: Word documents .doc or MP3
files with extension .dlf are ignored and will not
be played.
• AAC, WAV, PCM audio files
• DRM protected WMA files
• WMA files in Lossless format
Title 001
Title 002
Title 003
Album 02
Title 001
Title 002
Title 003
Album 03
Title 001
Title 002
Title 003
Organize your MP3/WMA files in different
folders or subfolders as required.
Note:
– If you have not organized MP3/WMA files into
any albums on your disc, an album “00” will be
automatically assigned for all those files.
– Make sure that the file names of MP3 files end
with .mp3. and the file names of WMA files end
with .wma.
– For DRM protected WMA files, use Windows
Media Player 10 (or later) for conversion. Visit www.
microsoft.com for details about Windows Media
Player and WM DRM (Windows Media Digital
Rights Management).
24
P001-P031_MCM276R_37_Eng
24
2006.7.26, 15:14
1
2
Check the USB device has been properly
connected. (See Installation: Connecting an
additional appliance)
Press SOURCE once or more to select USB
(or USB on the remote control)
➜ The icon
3
English
USB
appears
– NO AUDIO appears if no audio file is found in
the USB device
Play the USB’s audio files as you do with the
albums/tracks on a CD (See CD)
Note:
– For compatibility reasons, the album/track
information may differ from what it is displayed
through flash players’ music management software.
– File names or ID3 tags will be displayed as --if they are not in English.
25
P001-P031_MCM276R_37_Eng
25
2006.7.26, 15:14
DOCK (Optional)
English
Portable player
Dock
IMPORTANT!
– The dock ports of this system are only
compatible with DC276.You have to
purchase the accessories separately. Do
not try to connect any other dock
accessories to this system!
Compatible portable players
● Most Apple iPod models with 30-pin dock
connectors as follows: 20GB, 40GB, 20/30GB
Photo, 40/60GB Photo, 30GB Video, 60GB Video,
Mini and Nano
● Philips GoGear players with dock connectors, as
follows:
– HDD1420, HDD1620, HDD1630, HDD1635,
HDD1820, HDD1830, HDD1835;
– HDD1840, 1850;
– HDD6320, HDD6330
Selecting the correct dock
adaptor
● For the iPod dock, 8 dock adaptors of different
type, as indicated at the back of the adaptor, are
included to fit the following iPod:
20GB, 40GB, 20/30GB Photo, 40/60GB Photo,
30GB Video, 60GB Video, Mini and Nano.
● For the Philips GoGear dock, 3 dock adaptors of
different type are included. Each adaptor is
marked a number from “1” to “3” at its back.
These numbers indicate the fit Philips GoGear
players as follows:
“1” = HDD6320/6330
“2” = HDD1420/1620/1630/1635/1820/1830/
1835
“3” = HDD1840/1850
26
P001-P031_MCM276R_37_Eng
26
2006.7.26, 15:14
Setup
1
2
Connect the iPod or GoGear docking cradle
(depending on the portable player you use) to
the MCM276R Micro Hi-Fi System by using the
docking cable and RCA to 3.5mm jack converter
(as shown on the last page).
➜ Make sure to correctly connect the two line
out plugs of the docking cable to the line in
ports of the converter by matching colors
before connecting the docking cable to the
system.
Insert a dock adapter corresponding to the
portable player you use.
2
Playing an iPod/GoGear portable
player
1
● Make sure that you have powered on Philips
GoGear before selecting DOCK source.
➜ On the display, "GoGear" is displayed if Philips
GoGear is connected, or "iPod" is displayed if
iPod is connected.
2
3
2
1
1
● To connect with a different iPod/GoGear
portable player, pop up the corresponding dock
adapter and replace with a new one of the
matching type.
Correctly dock your GoGear or iPod por table
player in the cradle. Make sure the dock adapter
is compatible.
Press SOURCE on the front panel of the
MCM276R Micro Hi-Fi System repeatedly or
DOCK on the remote to select DOCK source.
Playback starts automatically. You can select
available features (such as play/pause, skip track,
fast forward/backward) during playback.
Charging iPod battery using the
dock (GoGear charging not
supported)
● In DOCK mode, directly dock your iPod
portable player on the cradle for charging.
27
P001-P031_MCM276R_37_Eng
27
2006.7.26, 15:14
English
DOCK (Optional)
Timer
SLEEP
English
Setting the timer
The set can be used as an alarm clock, whereby
the selected source (CD, TUNER or USB) star ts
playback at a preset time. Make sure the
clock is set before using the timer.
1
2
3
4
5
6
7
Press and hold TIMER on the remote control
until SET TIMER appears
➜
flashes. SELECT SOURCE scrolls
➜ Display shows current source CD, TUNER or
USB
Press SOURCE on the set repeatedly to select
the source (or press CD,TUNER or USB on
the remote control)
Press TIMER to confirm
➜ The hours digits start flashing
Helpful hints:
The timer will not work at the set time if
- the set is switched on
- the timer is deactivated
The set will switch to Tuner source
automatically if :
- no CD is inserted when the selected source is CD;
- no USB device is connected when the selected
source is USB
SLEEP
You can set a certain period of time after which
the set will switch off.
● On the remote control, press SLEEP
repeatedly to select the desired time period
options (in minutes):
➜ Display shows in sequence: Sleep 90, 75,
60, 45, 30, 15
➜ Display shows the selected option briefly and
returns to its previous status. The icon
appears
Hold down or press VOLUME +/- repeatedly
to set the hours (or turn VOLUME on the
set)
Press TIMER to confirm
➜ The minutes digits start flashing
Hold down or press VOLUME +/- repeatedly
to set the minutes (or turn VOLUME on the
set)
Press TIMER to confirm
➜ The timer is now set and activated
➜ At the set alarm time, the CD, TUNER or
USB will switch on (volume level: max. 20)
Note:
– The set will exit from the timer setting mode if
no button is pressed within 90 seconds.
To deactivate the sleep timer, press
SLEEP again
disappears
➜ The icon
or
Press STANDBY-ON to switch off the set (or
y on the remote control)
Helpful hints:
– The SLEEP function does not affect your alarm
time setting.
Activating and deactivating
TIMER
● Press TIMER on the remote repeatedly to
activate or deactivate the timer.
➜ If activated, the last set source and start time
are displayed
➜ If deactivated, “TIMER OFF” appears
28
P001-P031_MCM276R_37_Eng
28
2006.7.26, 15:14
AMPLIFIER
Output power .......................................... 2 x 5 W RMS
............................................................ 10 W + 10 W MPO
........................................................................ 2 x 4 W FTC(1)
Signal-to-noise ratio ....................................... ≥ 75 dBA
Frequency response ........ 50 – 20,000 Hz, ± 3 dB
Impedance loudspeakers ..................................... ≥ 4 Ω
Impedance headphones .................... 32 Ω -1000 Ω
......................................................................................... <0.5W
(1) (4 W, 120-12.5 kHz, 10% THD)
CD PLAYER
Frequency range .................................. 30 – 18000 Hz
Signal-to-noise ratio ............................................ 75 dBA
TUNER
FM wave range ................................... 87.5 – 108 MHz
AM wave range ................................... 530 - 1700 kHz
Number of presets ........................................................ 40
Antenna
FM ................................................................. 300Ω wire
AM ............................................................. Loop antenna
USB PLAYER
USB ................................................................... 12Mb/s, V1.1
......................................... support MP3 and WMA files
Number of albums/ folders ................ maximum 99
Number of tracks/titles ...................... maximum 999
SPEAKERS
Bass reflex system
Dimensions (w x h x d) .... 160 x 269 x 90 (mm)
GENERAL INFORMATION
AC Power ................................................... 120 V / 60 Hz
Dimensions (w x h x d, with/without the stand)
.................. 194 x 285 x 118/194 x 269 x 90 (mm)
Weight(with/without speakers) ........... 3.8 / 2.2 kg
Standby power consumption ............................ <5 W
Eco power standby ........................................... <0.5 W
Specifications and external appearance are
subject to change without notice.
Maintenance
Cleaning the disc lens
Cleaning the Cabinet
● Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
● When a disc becomes dirty,
clean it with a cleaning cloth.
Wipe the disc from the centre
out.
● After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.
● Do not use solvents such as
benzene, thinner, commercially
available cleaners, or antistatic spray intended for
analogue records.
29
P001-P031_MCM276R_37_Eng
29
2006.7.26, 15:14
English
Specifications
Troubleshooting
English
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or Philips for
help.
Problem
Solution
“NO DISC” is displayed.
✔ Insert a disc.
✔ Wait until the moisture condensation at the lens
has cleared.
✔ Replace or clean the disc, see “Maintenance”.
✔ Use a finalised CD-RW or a correct MP3/WMA
-CD format disc.
Some files on the USB device are not
displayed.
✔ Check if the number of folders exceeds 99 or
the number of titles exceeds 999
✔ If the signal is too weak, adjust the antenna or
Radio reception is poor.
connect an external antenna for better
reception.
✔ Increase the distance between the Micro HiFi
System and your TV or VCR.
The system does not react when buttons
are pressed.
✔ Remove and reconnect the AC power plug and
Sound cannot be heard or is of poor
quality.
✔
✔
✔
✔
✔
The left and right sound outputs are
reversed.
✔ Check the speaker connections and location.
switch on the system again.
Adjust the volume.
Disconnect the headphones.
Check that the speakers are connected correctly.
Check if the stripped speaker wire is clamped.
Make sure the MP3-CD was recorded within
32~256 kbps bit rate with sampling frequencies
at 48 kHz, 44.1 kHz or 32 kHz.
30
P001-P031_MCM276R_37_Eng
30
2006.7.26, 15:14
The remote control does not function
properly.
✔ Select the source (CD or TUNER, for example)
✔
✔
✔
✔
before pressing the function button (ÉÅ,í,
ë).
Reduce the distance between the remote
control and the system.
Insert the battery with its polarities
(+/– signs) aligned as indicated.
Replace the battery.
Point the remote control directly toward
IR sensor on the front of the system.
The timer is not working.
✔ Check the set is switched off
✔ Set the clock correctly.
✔ Press TIMER to switch on the timer.
The Clock/Timer setting is erased.
✔ Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
The menu navigation or photo playback
of the docked player cannot be carried
out through the buttons on MCM276R or
its remote control.
✔ The buttons on MCM276R and its remote
The STOP 9 and some buttons on
MCM276R and its remote control have
no function.
✔ The playback of the docked player cannot be
The battery of my Philips GoGear in
dock is drained when it is not used for
playback.
✔ The docked GoGear is still comsuming battery.
control can control playback of audio contents
only. To navigate the menu, use the controls on
the docked player.
stopped using the STOP 9 button on
MCM276R and its remote control.
✔ The buttons ( 2; , ¡1, 2™ and VOLUME )
function only.
Power it off if you don’t use the player.
31
P001-P031_MCM276R_37_Eng
31
2006.7.26, 15:14
English
Troubleshooting
Appendix
English
How to mount your MCM276R
onto walls
Mounting your MCM276R
1
IMPORTANT!
– The wall mounting instructions are for
the use of the qualified wall mounting
person only!
– Ask a qualified person to help you
with the wall mounting, which includes
drilling holes on the wall and
mounting the set onto walls.
What’s in the supplied mounting kits
Align the template in the chosen location on a
wall. Use a pencil to mark the drilling positions
(as shown)
140 mm (5.51")
2
3
140 mm (5.51")
Drill two 6mm diameter holes as marked
Secure the dowels and screws in the holes
respectively, leaving the screws 5mm proud of
the wall
1 x template (Wall
mounting
instructions)
2 x screws
4
What else you’ll need
– Drilling tools (e.g. electric drill)
To detach the stand,
a. As shown, hold down the 3 PRESS buttons
b. Move out the stand to detach
Preparation
PRESS
2
PRESS
1
To find a suitable location for mounting, try
your necessary rear connections (see
the chapter Installation).
Ask a qualified person to help you with the
wall mounting, who should:
– to avoid unexpected damage, learn about the
piping, wiring and other relevant information
inside your walls;
– according to the drilling requirements, choose
suitable drilling tools;
– take other precautions necessary for the wall
mounting work.
5
6
Hang the unit on the fastening screws
As shown, hook and mount the speakers in
place
r
ake
Spe
in
Ma
unit
t
igh
rR
ake
Spe
s
le
Ho
32
P001-P031_MCM276R_37_Eng
32
2006.7.26, 15:14
Left
33
P001-P031_MCM276R_37_Eng
33
2006.7.26, 15:14