Philips DVP3126K/98 User manual User`s manual

Add to my manuals
43 Pages

advertisement

Philips DVP3126K/98 User manual User`s manual | Manualzz
DVDVIDEO
VIDEOPLAYER
PLAYER
DVD
DVP3126K
Thank you for choosing Philips.
Need help fast?
Read your User’s Manual first for quick tips that make using
your Philips product more enjoyable.
If you have read your instructions and still need assistance,
you may access our online help at www.philips.com/support
01-43_dvp3126K_98_eng1.indd 1
2007-02-12 3:31:44 PM
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
2
01-43_dvp3126K_98_eng1.indd 2
2007-02-12 3:31:56 PM
English ------------------------------------------6
English
Index
Bahasa Melayu------------------------------- 82
01-43_dvp3126K_98_eng1.indd 3
Bahasa Melayu
-------------------------------- 44
2007-02-12 3:31:57 PM
General Information
English
Environmental Information
Laser Safety
All unnecessary packaging has been
omitted. The packaging has been made
easy to separate into two materials;
cardboard (box) and polyethylene (bags,
protective foam sheet).
This unit employs a laser. Due to possible
eye injury, only a qualified service person
should remove the cover or attempt to
service this device.
NOTE:
Pictures shown maybe different
between countries.
Your DVD player consists of materials
which can be recycled and reused if
disassembled by a specialised company.
Please observe the local regulations
regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
CAUTION:
WARNING LOCATION: ON THE
BACKPLATE OF THE SET
NEVER MAKE OR CHANGE
CONNECTIONS WITH THE
POWER SWITCHED ON.
Manufactured under license from
Dolby Laboratories, “Dolby”
and the double-D symbol are
trademarks of Dolby Laboratories.
Windows Media and the Windows logo
are trademarks, or registered
trademarks of Microsoft Corporation
in the United States and/or other
countries.
Specifications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners.
For Customer Use:
Read carefully the information located at
the bottom or rear of your DVD Video
player and enter below the Serial No.
Retain this information for future
reference.
Model No. DVP 3126K
Serial No. ___________________
LASER
Type
Semiconductor laser
InGaAlP (DVD)
AIGaAs (CD)
Wave length
658 nm (DVD)
790 nm (CD)
Output Power 7.0 mW (DVD)
10.0 mW (VCD/CD)
Beam divergence 60 degrees
4
01-43_dvp3126K_98_eng1.indd 4
2007-02-12 3:31:57 PM
English
Language Code
5
01-43_dvp3126K_98_eng1.indd 5
2007-02-12 3:31:57 PM
Contents
English
Care and Safety Information
Setup .............................................................................................................................................................8
Cleaning discs .............................................................................................................................................8
General Information
Accessories supplied ................................................................................................................................9
Region codes...............................................................................................................................................9
Connections
Connecting to television .......................................................................................... 10-11
Using Composite Video jacks (CVBS) .............................................................................................. 10
Using Component Video jacks (YPbPr) ........................................................................................... 10
Using an accessory RF modulator ......................................................................................................11
Connecting the power cord...........................................................................................12
Optional connections
Connecting to a Multi-channel Receiver .....................................................................12
Receiver has a Dolby Digital decorder .......................................................................................................12
Connecting to a stereo system .....................................................................................13
Stereo system has right/left Audio In jacks .................................................................................... 13
Connecting to a digital AV receiver .............................................................................13
Receiver has a PCM, Dolby Digital or MPEG decoder ................................................................ 13
Product Overview
Front and Rear panels ....................................................................................................14
Remote Control ............................................................................................................. 15
Getting Started
Step 1: Inserting Batteries.............................................................................................16
Using the remote control to operate the system ......................................................................... 16
Step 2: Finding your viewing channel ...........................................................................16
Step 3: Setting up Progressive Scan feature...............................................................17
Step 4: Selecting the matching color system ............................................................ 18
Step 5: Setting the language .........................................................................................19
On-screen display (OSD) language.................................................................................................... 19
Audio, Subtitle and DVD menu languages ....................................................................................... 19
Playback from Disc
Playable discs .................................................................................................................. 20
Supported formats ................................................................................................................................. 20
Playback Features
Starting disc playback ................................................................................................... 21
Basic playback controls ................................................................................................. 21
Pausing playback...................................................................................................................................... 21
Selecting title/chapter/track ................................................................................................................ 21
Stopping playback ................................................................................................................................... 21
Operations for video playback .................................................................................... 22
Using the Disc Menu ............................................................................................................................. 22
Zooming in ............................................................................................................................................... 22
Resuming playback from the last stopped point ............................................................................ 22
Slow Motion ............................................................................................................................................. 22
Forward / Reverse Searching .............................................................................................................. 22
6
01-43_dvp3126K_98_eng1.indd 6
2007-02-12 3:31:57 PM
Viewing the disc playback information ..........................................................23-24
Title/Chapter/Track selection ............................................................................................................ 23
Time Search ............................................................................................................................................. 23
Angle .......................................................................................................................................................... 23
Repeat play mode ................................................................................................................................... 24
Repeating a section within a chapter/track ..................................................................................... 24
Special DVD Features ................................................................................................... 25
Playing a Title ........................................................................................................................................... 25
Changing the Audio Language ............................................................................................................. 25
Subtitles..................................................................................................................................................... 25
Special VCD and SVCD Feature.................................................................................. 25
Playback Control (PBC)........................................................................................................................ 25
Playing MP3/WMA/JPEG/Kodak/Fuji Picture CD ................................................26-27
General Operation ................................................................................................................................ 26
Playback selection .................................................................................................................................. 26
Zoom picture (JPEG) ............................................................................................................................ 27
Playback with multi-angles (JPEG) ..................................................................................................... 27
English
Contents
Karaoke Operations
Playing Karaoke disc...................................................................................................... 28
General Operation ................................................................................................................................ 28
Vocal........................................................................................................................................................... 28
Karaoke ..................................................................................................................................................... 28
DVD Menu Options
Using the Language setup menu ................................................................................. 29
OSD Language ......................................................................................................................................... 29
Subtitle / Audio / DVD Menu .............................................................................................................. 29
Using the Video setup menu ...................................................................................30-32
Setting the Aspect Ratio ...................................................................................................................... 30
View Mode ............................................................................................................................................... 31
TV System ................................................................................................................................................ 31
Video Out ................................................................................................................................................. 31
Smart Picture........................................................................................................................................... 32
Using the Audio setup menu ...................................................................................33-34
Front / Center / Surround Speakers ................................................................................................. 33
Subwoofer ................................................................................................................................................ 33
Digital Output ......................................................................................................................................... 34
Night Mode .............................................................................................................................................. 34
Down Sampling ....................................................................................................................................... 34
Using the Rating setup menu ..................................................................................35-36
Rating level settings .........................................................................................................................35-36
Changing the Password......................................................................................................................... 36
Using the Misc (Miscellaneous) setup menu ......................................................... 37-38
Restoring to the original settings....................................................................................................... 37
Volume Control ...................................................................................................................................... 38
Speakers Delay ........................................................................................................................................ 38
Others
Software upgrade .......................................................................................................... 39
Troubleshooting .......................................................................................................40~41
Specifications ................................................................................................................. 42
Glossary........................................................................................................................... 43
7
01-43_dvp3126K_98_eng1.indd 7
2007-02-12 3:31:58 PM
Care and Safety Information
English
DANGER!
High voltage! Do not open the
device. You run the risk of getting
an electric shock.
The machine does not contain any
user-serviceable parts. Please leave
all maintenance work to qualified
personnel.
Cleaning discs
Some problems occur because the disc
inside the player is dirty (frozen picture,
sound disruptions, picture distortions).
To avoid these problems, discs should be
cleaned on a regular basis.
To clean a disc, use a micro fibre cleaning
cloth and wipe the disc from the center
to the edge in a straight line.
Setup
Finding a suitable location
– Place the set on a flat, hard and stable
surface. Do not place the set on a
carpet.
– Do not put any equipment or heavy
objects on top of the set.
– Do not position the set on top of
other equipment that might heat it up
(such as receiver or amplifier).
– Do not put anything under the set
(such as CDs, magazines).
– Install this unit near the AC outlet and
where the AC power plug can be
reached easily.
Space for ventilation
– Place the apparatus in a location with
adequate ventilation to prevent
internal heat build up. Allow at least
10 cm (4.0”) clearance from the rear
and the top of the set and 5cm (2.0”)
from the left and right to prevent
overheating.
CAUTION!
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or anti-static sprays intended for analog
discs. Since the optical unit (laser) of the
DVD player operates at a higher power
than regular DVD or CD players,
cleaning CDs intended for DVD or CD
players may damage the optical unit
(laser). Therefore, refrain from using a
cleaning CD.
5cm (2.0")
10cm (4.0")
10cm (4.0")
5cm (2.0")
Avoid high temperatures, moisture,
water and dust
– Apparatus shall not be exposed to
dripping or splashing.
– Do not place any sources of danger
on the apparatus (such as liquid filled
objects, lighted candles).
8
01-43_dvp3126K_98_eng1.indd 8
2007-02-12 3:31:58 PM
Accessories supplied
Composite
video cable
(yellow) and
Audio cables
(white, red)
Region codes
This DVD player is designed to support
the Region Management System. Check
the regional code number on the disc
package. If the number does not match
the player’s region number (see table
below), the player may be unable to
playback the disc.
Tips:
– It may not be possible to play CD-R/RW
or DVD-R/RW in all cases due to the type of
disc or condition of the recording.
– If you are having trouble playing a certain
disc, remove the disc and try a different one.
Improper formatted disc will not played on
this DVD player.
Region
Remote
control and
two AAA
batteries
Discs that can
be played
U.S.A. and
Canada regions
ALL
1
U.K and
Europe regions
ALL
2
ALL
3
Australia,
New Zealand,
Latin America
ALL
4
Russia and
India regions
ALL
5
China, Calcos Islands,
Walls and Futuna
Islands
ALL
6
Asia Pacific,
Taiwan, Korea
AC Power
Cable
English
General Information
9
01-43_dvp3126K_98_eng1.indd 9
2007-02-12 3:31:58 PM
Connections
English
Connecting to television
COMPONENT
VIDEO IN
COMPONENT
VIDEO IN
S-VIDEO
IN
AUDIO
IN
S-VIDEO
IN
AUDIO
IN
V (Pr/Cr)
VIDEO IN
VIDEO IN
Y
COMPONENT
VIDEO IN
S-VIDEO
IN
V (Pr/Cr)
AUDIO
OUT
V (Pr/Cr)
U (Pb/Cb)
U (Pb/Cb)
Y
COMPONENT
VIDEO IN
S-VIDEO
IN
V (Pr/Cr)
AUDIO
OUT
U (Pb/Cb)
VIDEO IN
U (Pb/Cb)
Y
VIDEO IN
Y
1
2
2
1
CENTER
REAR L
FRONT L
FRONT R
SUBWOOFER REAR R
AUDIO OUT
DIGITAL
OUT
COAXIAL
TV OUT
COMPONENT VIDEO OUT
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your television.
– Connect the DVD player directly
to the television.
Using Composite Video jacks
(CVBS)
A Use the composite video cable (yellow)
to connect the DVD player’s TV OUT
(CVBS) jack to the video input jack (or
labeled as A/V In, Video In, Composite or
Baseband) on the television (cable
supplied).
B To hear sound of this DVD player
through your television, use the audio
cables (white/red) to connect FRONT (L/
R) AUDIO OUT jacks of the DVD player
to the corresponding AUDIO IN jacks
on the television (cable supplied).
CENTER
REAR L
FRONT L
FRONT R
SUBWOOFER REAR R
AUDIO OUT
DIGITAL
OUT
COAXIAL
TV OUT
COMPONENT VIDEO OUT
IMPORTANT!
– The progressive scan video quality
is only possible when using YPbPr
and a progressive scan television is
required.
Using Component Video jacks
(YPbPr)
A Use the component video cables (red/
blue/green) to connect the DVD player’s
YPbPr jacks to the component video
input jacks (or labeled as YPbPr) on the
television (cable not supplied).
B To hear sound of this DVD player
through your television, use the audio
cables (white/red) to connect FRONT (L/
R) AUDIO OUT jacks of the DVD player
to the corresponding AUDIO IN jacks on
the television (cable supplied).
C Proceed to page 17 for detailed
progressive scan setup.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
10
01-43_dvp3126K_98_eng1.indd 10
2007-02-12 3:31:58 PM
English
Connections (continued)
ANT IN
RF coaxial cable to TV
2 Back of RF Modulator
(example only)
ANT IN
TO TV
AUDIO IN
R
L
VIDEO
IN
CH3 CH4
ANT IN
3
4
RL
FRONT L
FRONT R
RR
O OUT
DIGITAL
OUT
COAXIAL
1
TV OUT
COMPONENT VIDEO OUT
IMPORTANT!
– If your television only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the
DVD playback on the television. See
your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
Using an accessory RF modulator
A Use the composite video cable (yellow)
to connect the DVD player’s TV OUT
(CVBS) jack to the video input jack on
the RF modulator.
C To hear sound of this DVD player
through your TV, use the audio cables
(white/red) to connect FRONT (L/R)
AUDIO OUT jacks of the DVD player to
the corresponding AUDIO IN jacks on
the RF modulator (cable supplied).
D Connect the Antenna or Cable TV
service signal to the ANTENNA IN or RF
IN jack on the RF modulator. (It may
have been connected to your TV
previously. Disconnect it from the TV).
B Use the RF coaxial cable (not supplied) to
connect ANTENNA OUT or TO TV jack
on the RF modulator to the ANTENNA
IN jack on the television.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
11
01-43_dvp3126K_98_eng1.indd 11
2007-02-12 3:31:58 PM
Connections (continued)
English
Connecting the power cord
Connecting to a Multi
Channel Receiver
MULTICHANNEL AUDIO IN
CENTER
REAR L
FRONT L
FRONT R
SUBWOOFER REAR R
AUDIO OUT
DIGITAL
OUT
COAXIAL
TV OUT
COMPONE
After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
When no disc is loaded, press
STANDBY ON on the DVD player
front panel.
“– – –” may appear on the display
panel.
CENTER
REAR
FRONT
SUBW.
REAR
FRONT
CENTER
REAR L
FRONT L
FRONT R
SUBWOOFER REAR R
AUDIO OUT
DIGITAL
OUT
COAXIAL
TV OUT
COMPONENT VIDEO OUT
Receiver has a Dolby Digital
decoder
A Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
B Connect the Audio Out Left and Right
jack for Front and Rear speakers to the
corresponding input jacks on your
receiver (cable not supplied).
C Connect the Audio Out for Center
speaker and Subwoofer to the
corresponding inputs on your receiver
(cable not supplied).
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
12
01-43_dvp3126K_98_eng1.indd 12
2007-02-12 3:31:59 PM
Connecting to a stereo
system
English
Optional connections
Connecting to a digital AV
receiver
STEREO
AV Receiver
AUDIO
IN
AUDIO
IN
DIGITAL
CENTER
REAR L
FRONT L
FRONT R
SUBWOOFER REAR R
AUDIO OUT
DIGITAL
OUT
COAXIAL
TV OUT
COMPONENT VIDEO OUT
Stereo system has right/ left Audio
In jacks
DIGITAL
CENTER
REAR L
FRONT L
FRONT R
SUBWOOFER REAR R
AUDIO OUT
DIGITAL
OUT
COAXIAL
TV OUT
COMPONENT VIDEO OUT
Receiver has a PCM, Dolby Digital
or MPEG decoder
A Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
A Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
B Use the audio cables (white/red) to
connect FRONT (L/R) AUDIO OUT
jacks of the DVD Player to the
corresponding AUDIO IN jacks on the
stereo system (cable supplied).
B Connect the COAXIAL jack of the DVD
player to the corresponding Digital Audio
In jack on your receiver (cable not
supplied).
C Set the DVD player’s digital output to
PCM-Only or ALL depending on the
capabilities of your receiver (see page 34
{Digital Output}).
Tip:
– If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
13
01-43_dvp3126K_98_eng1.indd 13
2007-02-12 3:31:59 PM
Product Overview
English
Front and Rear Panels
STANDBY ON 2
– Turns on the player or switches
to standby mode
STOP
– Stops playback
Disc Tray
OPEN/CLOSE ç
– Opens or closes the disc tray.
Display panel
– Shows information about the
current status of the DVD player.
PLAY/PAUSE u
– Starts or pauses playback.
IR Sensor
– Point the remote control towards
this sensor
LEVEL Mic
– For connecting microphone
MIC LEVEL
Level
– Microphone volume control
Mains ~ (AC Power Cord)
– Connect to a standard AC outlet
Multi-channel Audio Out
– Center speaker, subwoofer, front
and rear speakers multi-channel
connection
YPbPr (Component Video Out)
– Connect to YPbPr input of a
television
COAXIAL (Digital audio out)
– Connect to coaxial AUDIO input
of a digital audio equipment
TV OUT (CVBS)
– Connect to CVBS Video input of a
television
CENTER
REAR L
FRONT L
FRONT R
SUBWOOFER REAR R
AUDIO OUT
DIGITAL
OUT
COAXIAL
TV OUT
COMPONENT VIDEO OUT
14
01-43_dvp3126K_98_eng1.indd 14
2007-02-12 3:31:59 PM
Remote Control
DISC MENU
– Enters or exits the disc
contents menu
– Switches on or off the
playback control mode (for
VCD 2.0 only)
OK
– Confirms an entry or
selection
RETURN/TITLE
– To go back to previous
menu/ show title menu
PREV í
– Skips to the previous title/
chapter/ track
STOP
– Stops playback
u PLAY/PAUSE
– Starts or pauses playback
SUBTITLE
– To access subtitle language
system menu
ZOOM
– Enlarge a picture on the TV
screen
VOCAL
– Choose audio channels or
karaoke methods
KARAOKE
– Press repeatedly to access
karaoke menu
2
– To switch the DVD player
to standby mode or ON
English
Product Overview (continued)
DISPLAY
– Displays information on TV
screen during playback
WX
– Cursor buttons for moving
to the left or right, do a fast
forward/reverse search.
ST
– Cursor buttons for moving
up/down, do a slow
forward/backward
SETUP
– Enters or exits the system
setup menu
NEXT ë
– Skips to the next title/
chapter/track
MUTE
– Disables or enables sound
output
Alphanumeric keypad
– Selects numbered items in
a menu
AUDIO
– Selects an audio language
(DVD/VCD) or an audio
channel
15
01-43_dvp3126K_98_eng1.indd 15
2007-02-12 3:31:59 PM
Getting Started
English
Step 1 : Inserting Batteries
Step 2 : Finding your viewing
channel
A Press STANDBY-ON 2 on the DVD
player to turn it on.
A Open the battery compartment.
B Insert two batteries type R03 or AAA,
following the indications (+ –) inside the
compartment.
C Close the cover.
CAUTION!
– Remove batteries if they are
exhausted or if the remote is not to
be used for a long time.
– Do not use old and new or
different types of batteries in
combination.
– Batteries contain chemical
substances, so they should be
disposed of properly.
Using the remote control to
operate the system
DISC
MENU
DISPLAY
RETURN
TITLE
SETUP
PREV
NEXT
B Turn on the TV and set it to the correct
video-in channel. You should see the blue
DVD background screen.
Usually these channel are between the
lowest and highest channels and may
be called FRONT, A/V IN, VIDEO.
See your TV’s manual for more
details.
Or, you may go to channel 1 on your
TV, then press the Channel down
button repeatedly until you see the
Video In channel.
Or, the TV remote control may have
a button or turn that chooses
different video modes.
Or, set the TV to channel 3 or 4 if
you are using an RF modulator.
C If you are using external equipment, (such
as audio system or receiver), turn it on
and select the appropriate input source
for the DVD player output. Refer to the
equipment user’s manual for detail.
A Aim the remote control directly at the
remote sensor (IR) on the front panel.
B Do not put any objects between the
remote control and the DVD player
while operating the DVD player.
16
01-43_dvp3126K_98_eng1.indd 16
2007-02-12 3:31:59 PM
Getting Started (continued)
(for Progressive Scan TV only)
The progressive scan displays twice the
number of frames per seconds than
interlaced scanning (ordinary normal TV
system). With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
Before you start...
– Ensure that you have connected this
DVD player to a progressive scan TV
using the Y Pb Pr connection (see page
10).
– Ensure that you have completed the
basic installation and set-up.
A Turn on your TV and set to interlace
mode (refer to your TV user manual).
B Press STANDBY ON 2 on the
remote control to turn on the DVD
player.
C Select the correct video-in channel.
The DVD background menu appears.
D Press SETUP.
E Press S T to select { Video }, then
press X.
Language
Video
Audio
Aspect
Aspect Ratio
Ratio
:: 4:3
4:3
View
View Mode
Mode
::Auto
Auto Fit
Fit
TV
TV System
System
::NTSC
PAL
Video
Video Out
Out
:Component
Interlaced
Smart
Smart Picture
Picture
: Personal
P-Scan
Rating
Misc
F Press S T repeatedly to select { Video
Out }, then press X.
TIPS:
G Select { P-Scan }, then press OK to
confirm.
The menu will appear on the TV.
English
Step 3 : Setting up
Progressive Scan feature
Activating Progressive Scan
1.Ensure your TV system supports
Progressive Mode
2.If there is a distorted picture on
the TV, wait 15 seconds for
automatic recover
Yes
NO
H Press W to highlight { Yes } and press
OK to confirm.
I Turn on your TV progressive scan mode
(refer to your TV user manual).
The menu will appear on the TV.
Confirm again to use new setting
Revert to original setting in 14 seconds
Yes
NO
J Press W to highlight { Yes } and press
OK to confirm.
The setup is now completed and you
can start enjoy the high quality
picture.
To deactivate Progressive Scan
manually:
Wait for 15 seconds for the auto
recovery.
OR
A Press OPEN/CLOSE ç on the DVD
player to open the disc tray.
B Press numeric keypad ‘1’ on the
remote control for few seconds.
The DVD background screen appears.
Tip:
– There are some progressive scan TVs and
High-Definition TVs that are not fully
compatible with this unit, resulting in the
unnatural picture when playing back a DVD
VIDEO disc in the progressive scan mode. In
such a case, turn off the progressive scan
feature on both the DVD player and your TV.
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
17
01-43_dvp3126K_98_eng1.indd 17
2007-02-12 3:32:00 PM
Getting Started (continued)
English
Step 4 : Selecting the
matching color system
The color system of the DVD player, disc
and TV should match in order for the
disc to play. Before changing the TV
system, determine the color system of
your TV.
Language
Video
Audio
Aspect
Aspect Ratio
Ratio
:: 4:3
4:3
View
View Mode
Mode
::Auto
Auto Fit
Fit
TV
TV System
System
: NTSC
Video
Video Out
Out
:PAL
Component
Smart
Smart Picture
Picture
: Personal
Multi
E Select a setting and press OK.
Follow the instructions show on the
TV to confirm the selection (if any).
Changing NTSC to PAL
1.Ensure your TV system supports
PAL Standard
2.If there is a distorted picture on
the TV, wait 15 seconds for
automatic recover
Yes
NO
Confirm again to use new setting
Revert to original setting in 14 seconds
Yes
NO
F Press W to highlight { Yes } and press
OK to confirm.
Rating
Misc
A Press SETUP.
B Press S T to select { Video }, then
press X.
C Press S T repeatedly to select { TV
System }, then press X.
D Use S T to select one of the options
below:
{ PAL }
Select this if the connected TV has the
PAL colour system. It will change the
video signal of an NTSC disc and output
it to PAL format.
{ NTSC }
Select this if the connected TV has the
NTSC colour system. It will change the
video signal of a PAL disc and output it to
NTSC format.
To reset to default TV color system:
Wait for 15 seconds for the auto
recovery.
OR
A Press OPEN/CLOSE ç on the DVD
player to open the disc tray.
B Press numeric keypad ‘3’ on the
remote control for few seconds.
The DVD background menu appears.
Tips:
– Before changing the current TV colour
setting, ensure that your TV supports the
‘selected TV System’.
– If there is no proper picture on your TV,
wait for 15 seconds for auto recovery.
Select PAL for Asia Pacific region.
Select NTSC for Taiwan region.
{ Multi }
Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
18
01-43_dvp3126K_98_eng1.indd 18
2007-02-12 3:32:00 PM
Step 5 : Setting the language
The language options are different
depending on your country or region. It
may not correspond to the illustrations
shown on the user manual.
On-screen display (OSD) language
Select this to change the language of this
DVD player screen display menu.
The menu language (on-screen display)
for the system will remain as you set it.
Audio, Subtitle and DVD menu
languages
You can choose your preferred language
or sound track from audio, subtitles and
DVD menu languages. If the selected
language is not available on the disc, the
disc’s default language will be used
instead.
Language
Video
OSD language
: English
Subtitle
: Auto
Audio
English
DVD menu
Chinese
Audio
English
Getting Started (continued)
Thai
Korean
Language
Video
OSD language
English
Subtitle
Traditional Chinese
Audio
Thai
DVD menu
Korean
Audio
Rating
Bahasa Melayu
Misc
: EnglishMelayu
Bahasa
Rating
Misc
A Press SETUP.
B Press S T to select { Language }, then
press X.
C Press S T to select { OSD Language },
then press X.
D Use S T to select a language and press
OK to confirm.
A Press SETUP.
B Press S T to select { Language }, then
press X.
C Press S T to highlight one of the
options below, then press X.
{ Audio }
Select this to change disc sound track
language.
{ Subtitle }
Select this to change the subtitle language.
{ DVD menu }
Select this to change the language of the
disc menu.
D Use S T to select a language and press
OK to confirm.
E Repeat steps C - D for other language
settings.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
19
01-43_dvp3126K_98_eng1.indd 19
2007-02-12 3:32:01 PM
Playback from Disc
English
IMPORTANT!
– If the INVALID KEY appears on
the TV screen when a button is
pressed, it means the function is not
available on the current disc or at
the current time.
– DVD discs and players are designed
with regional restrictions. Before
playing a disc, make sure the disc is
for the same zone as your player.
Playable discs
Using this DVD player, you can playback
on the following discs:
DVD Video (Digital Versatile
Super Video CD
MP3-Disc
Supported formats
MP3/WMA tracks
– The file extensions has be to be
‘.mp3’, ‘.wma’
– JPEG/ISO format
– Maximum 15 characters display.
– Supported sampling frequencies and
corresponding bit-rates;
32kHz
64 – 320 kbps
44.1kHz, 48kHz
80 – 320 kbps
Disc)
DVD±RW (DVD Rewritable)
Audio/Video format or
MP3/WMA/JPEG files.
DVD±R (DVD Recordable)
Audio/Video format or
MP3/WMA/JPEG files.
CD-R (CD-Recordable)
Audio/Video format or
MP3/WMA/JPEG files.
CD-RW (CD-Rewritable)
Audio/Video format or
MP3/WMA/JPEG files.
JPEG pictures
– The file extensions has be to be ‘.JPG’
and not ‘.JPEG.’
– JPEG/ISO format
– It can only display DCF-standard still
pictures or JPEG pictures such as
TIFF.
Tips:
– Maximum 100 sessions for CD and 10
multi border for DVD are supported.
– For DVD-R and DVD-RW multi border,
only finalized disc are supported.
– For DVD+R and DVD+RW multi border
both finalized and unfinalized disc are NOT
supported.
Audio CD (Compact Disc
Digital Audio)
Video CD
(Formats 1.0, 1.1, 2.0)
TIPS: Some discs cannot be played on this DVD player due to the configuration and characteristics of
the disc, or due to the condition of recording and authoring software that was used.
20
01-43_dvp3126K_98_eng1.indd 20
2007-02-12 3:32:01 PM
Starting disc playback
A Turn on the TV to the correct program
number for the DVD player (e.g. ‘EXT’,
‘0’, ‘AV’).
B Press STANDBY-ON 2 to turn on
the DVD player.
C Press OPEN/CLOSE ç on the front of
the DVD player.
You can also hold down the STOP
button on the remote control to open
and close the disc tray.
D Place a disc into the disc tray with the
label facing up, then press OPEN/
CLOSE ç.
For double-sided discs, load the side
which you want to play facing up.
E Playback may start automatically.
If not, press PLAY/PAUSE u.
If a disc menu appears on the TV, see
page 22 'Using the Disc Menu'.
If the child lock was activated for the
inserted disc, you have to enter your
four-digit password (see page 36).
For more playback features, see pages
21~27.
Tips:
– Do not overturn the DVD player while disc
loading, playing or ejecting.
– Do not close the disc tray manually even if
the power switched off.
Basic playback controls
Unless otherwise stated, all operations
described are based on Remote Control
use.
English
Playback Features
Pausing playback
A During playback, press PLAY/PAUSE
u to pause playback and display a still
picture.
Sound will be muted.
B To resume normal playback, press
PLAY/PAUSE u again.
Selecting title/chapter/track
Press PREV í / NEXT ë to go to
the previous or next title/chapter/track.
Press DISPLAY to display the disc
information text line for title/chapter/
track (example - 00/08).
Use alphanumeric keypad (0-9) to
enter valid title/chapter/track number,
then press OK.
The playback skips to the selected
title/chapter/track.
Stopping playback
Press STOP
.
Tips:
– Screen saver will start automatically if the
disc playback is stopped for about 5 minutes.
– The player will automatically switch to
Power Standby mode if you do not press any
buttons for about 15 minutes after the disc
has stopped playing.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
21
01-43_dvp3126K_98_eng1.indd 21
2007-02-12 3:32:01 PM
Playback Features (continued)
English
Operations for video
playback
Using the Disc Menu
Depending on the disc, a menu may
appear on the TV screen once you load
in the disc.
To select a playback feature or item
Use S T W X keys or numeric
keypad (0-9) on the remote, then press
OK to start playback.
To access or remove the menu
Press DISC MENU on the remote.
Zooming in
This function allows you to enlarge the
picture on the TV screen and to pan
through the enlarged picture.
A During playback, press ZOOM
repeatedly to display the picture with
different scales.
Use S T W X keys to pan through
the enlarged picture.
Playback will continue.
B Press ZOOM repeatedly to return to
the original size.
Resuming playback from the last
stopped point
Resume playback of the last 5 discs is
possible, even if the disc was ejected
(open) or standby. Auto resume is active
for DVD,VCD,SVCD,CD types of discs.
Load one of the last 5 discs.
‘Play from start, press [PREV]’ appears
during playback for first 10 seconds.
During the message appears on the TV
screen, press PREV to start playback
from the beginning.
Playback restarts from the first title
(DVD) or the beginning of the title/
track (VCD/CDDA/SVCD).
To remove the message from the TV
screen, press DISPLAY.
Slow Motion
You can slow forward or slow reverse a
disc during playback and select a different
speed.
For DVD,VCD,SVCD
A Press S T during playback to select the
required speed: 1/2, 1/4, 1/8 or 1/16
(forward or backward).
Sound will be muted.
B To return to normal speed, press PLAY/
PAUSE u.
Forward / Reverse Searching
You can fast forward or fast reverse a
disc during playback and select a desired
search speed.
For DVD,VCD,SVCD,CD
A Press W X directly or press í ë for 2
seconds during playback to select the
required speed: 2X, 4X, 8X, 16X or 32X
(backward or forward).
Sound will be muted (DVD/VCD) or
intermittent (CD).
B To return to normal speed, press PLAY/
PAUSE u.
Tip:
– For CD, fast forward or fast reverse is
available only when pressing í ë for few
seconds or more.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
22
01-43_dvp3126K_98_eng1.indd 22
2007-02-12 3:32:01 PM
Viewing the disc playback
information
You can view the disc information (such
as current title/chapter/track number,
total elapsed time and total playing time
on the disc) without interrupting the disc
playback.
During playback, press DISPLAY
repeatedly on the remote control.
The available disc information appears
on the TV screen with the following
sequence.
Title/Chapter
Title
1 /1
Chapter
6/16
(DVD)
Time
Time
00:03:36/01:22:34
(DVD)
Repeat/ Repeat A-B/ Angle
Off
Rep Off
1/1
(DVD)
Time Search
A When {Time} information appears on the
TV screen, press OK to access.
English
Playback Features (continued)
B Use the alphanumeric keypad 0-9 to
input the valid time (such as 0:34:27).
C Press OK to confirm.
The playback skips to the chosen
time.
Angle
A When {Angle} information appears on
the TV screen, press W X to highlight
{Angle}.
B Press OK repeatedly to switch between
different angle.
Playback will go to the selected angle.
Track
Track
3/21
(VCD)
Time
Time
00:00:56/00:03:34
(VCD)
Repeat/ Repeat A-B
Off
Rep Off
(VCD)
Title/Chapter/Track selection
A Press W X to select {Title} / {Chapter}
or {Track}, then press OK to access.
B Use the alphanumeric keypad 0-9 to
input a valid number.
C Press OK to confirm.
The playback skips to the chosen title/
chapter/track.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
23
01-43_dvp3126K_98_eng1.indd 23
2007-02-12 3:32:01 PM
Playback Features (continued)
English
Repeat play mode
The repeat play options vary depending
on the disc type.
A When ‘Repeat’ information appears on
the TV screen, press W X to highlight
{Off}, then press OK to access.
Repeat menu appears on the TV.
B Press OK repeatedly to select the
following repeat modes.
For DVD
– Repeat Chapter (currently playing
chapter)
– Repeat Title (currently playing title)
– Off (cancel)
For Video CD, Audio CD
– Repeat Single (currently playing track)
– Repeat All (entire disc)
– Off (cancel)
Repeating a section within a
chapter/track
You can repeat the playback of a specific
segment within a title/chapter track. To
do this, you must mark the start and end
of the segment you want.
A When ‘Repeat’ information appears on
the TV screen, press W X to highlight
{Rep Off}.
B Press OK to choose your starting point
‘A’.
C Press OK again at your chosen end point
‘B’.
The section from point ‘A’ to ‘B’ will
now repeat continuously.
D Press OK the third time to exit.
For MP3/WMA
– Repeat Single (currently playing track)
– Repeat Folder (current folder)
– Off (cancel)
For JPEG
– Repeat Single (currently playing file)
– Repeat Folder (current folder)
– Off (cancel)
Tip:
– For VCD/SVCD, repeat playback is not
possible if the PBC mode is switched on.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
24
01-43_dvp3126K_98_eng1.indd 24
2007-02-12 3:32:02 PM
Special DVD Features
English
Playback Features (continued)
Special VCD and SVCD
Feature
Playing a Title
A Press DISC MENU.
The disc title menu appears on the TV
screen.
B Use S T W X keys or alphanumeric
keypad 0-9 to select a play option.
C Press OK key to confirm.
Changing the Audio Language
For DVD
Press AUDIO repeatedly to select
different audio languages.
Changing the Audio Channel
For VCD
Press AUDIO to select the available
audio channels provided by the disc
(LEFT, RIGHT, MIX, STEREO).
Subtitles
Press SUBTITLE repeatedly to select
different subtitle languages.
Playback Control (PBC)
For VCD with Playback Control
(PBC) feature (version 2.0 only)
Press DISC MENU to toggle between
‘PBC ON’ and ‘PBC OFF’.
If you select ‘PBC ON’, the disc menu
(if available) will appear on the TV.
Use the PREV í / NEXT ë to
turn to previous/page page or use the
alphanumeric keypad 0-9 to select a
play option.
During playback,
pressing PREV í after the first 5
seconds, playback will start from the
beginning of the current track,
pressing PREV í within the first 5
seconds, playback will go to the
previous track.
During playback, pressing RETURN/
TITLE will return to the menu screen (if
PBC is on).
If you want to skip the index menu
and playback directly from the
beginning,
Press DISC MENU key on the remote
control to turn to PBC off.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
25
01-43_dvp3126K_98_eng1.indd 25
2007-02-12 3:32:02 PM
Playback Features (continued)
English
Playing MP3/WMA/JPEG/
Kodak/Fuji Picture CD
IMPORTANT!
You have to turn on your TV and set to
the correct Video In channel. (See page
16 ‘Finding your viewing channel’).
Playback selection
During playback, you can;
Press PREV í / NEXT ë to select
the previous/next track/file in the current
folder.
Press S T W X on the remote to
rotate/flip the picture files.
Press PLAY/PAUSE u repeatedly to
pause/resume playback.
General Operation
A Load a disc.
The disc reading time may exceed 30
seconds due to the complexity of the
directory/file configuration.
The data disc menu and ID3 (MP3) /
Meta data (WMA) information
(including at least title, singer and
album) appears on the TV screen.
00:00:46
For MP3/WMA,
During playback,
pressing PREV í after the first 5
seconds, playback will start from the
beginning of the current track,
pressing PREV í within the first 5
seconds, playback will go to the
previous track.
/MP3/07.....MP3
02/20
Go Up
Filter
07.----
Repeat
: Off
09.--2002.--TAKE ME TO YOUR
----
Music Playing
---
During playback, press and hold PREV
í / NEXT ë for about few seconds to
access fast forward or fast reverse with
the required speed: 2X, 4X, 8X, 16X or
32X.
----
Title:----- Singer:-----
Album Year:
Comment:
B Press S T to select the folder and press
OK to open the folder.
Tip:
– For MP3/WMA, fast forward or fast
reverse is available only when pressing í
ë for few seconds or more.
C Press S T to select a track/file.
D Press OK to confirm.
Tips:
– If the playing file is not selected, the ID3/
Meta information will disappear.
– If a jpeg file is selected, a preview will
appear.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
26
01-43_dvp3126K_98_eng1.indd 26
2007-02-12 3:32:02 PM
Playback Features (continued)
English
Zoom picture (JPEG)
During playback, press ZOOM
repeatedly to display the picture with
different scales.
Use S T W X to view the zoomed
picture.
Playback with multi-angles (JPEG)
During playback, press S T W X to
rotate the picture on the TV screen.
S T: flip the picture vertically by 180º
W: rotate the picture anti-clockwise by
90º
X: rotate the picture clockwise by 90º
Tip:
– It may not be possible to play certain
MP3/JPEG disc due to the configuration and
characteristics of the disc or condition of the
recording.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
27
01-43_dvp3126K_98_eng1.indd 27
2007-02-12 3:32:02 PM
Karaoke Operations
English
Playing Karaoke discs
IMPORTANT!
You have to turn on your TV and set to
the correct Video In channel. (See page
16 ‘Finding your viewing channel’).
General Operation
Vocal
z You can fade out the original vocal from
a karaoke disc.
z Press VOCAL repeatedly to choose
different audio modes.
Tip:
– This function and on-screen display
depends on the availability of the disc.
MIC LEVEL
Karaoke
LEVEL z Press KARAOKE repeatedly to access
the karaoke menu.
z Press S T to select ‘Karaoke’, ‘Key
Shift’, ‘Echo’, ‘Voice Cancel’.
A Connect a microphone (not supplied) to
MIC on the front panel of the DVD
player.
B Press KARAOKE repeatedly to access
Karaoke menu.
Î ‘Karaoke : Off’ appears on the TV
screen.
Î Press OK to turn ‘On’ or ‘Off’ the
karaoke mode.
C Load a karaoke disc and press PLAY/
PAUSE u.
A When ‘Karaoke’ is selected, press OK to
set karaoke ‘On’ or ‘Off’.
B When ‘Key Shift’ is selected, press W X
to adjust the pitch value between 0 and
14.
This function allows you to adjust the key
tone level to match your vocal.
C When ‘Echo’ is selected, press W X to
adjust the echo level.
D When ‘Voice Cancel’ is selected, press
OK to set voice cancel ‘On’ or ‘Off’.
D Adjust the microphone volume up or
down using MIC LEVEL button on the
side of the panel of the DVD player.
Tip:
– Before connecting the microphone, set the
microphone volume to the minumum level to
prevent howling.
28
01-43_dvp3126K_98_eng1.indd 28
2007-02-13 10:33:15 AM
This DVD Player setup is carried out via
the TV, enabling you to customize the
DVD player to suit your particular
requirement.
Using the Language setup
menu
A Press SETUP on the remote control.
The system setup menu appears.
Language
Video
OSD Language
: English
Subtitle
:Auto
Audio
:English
DVD Menu
:English
OSD Language
This menu contains various language
options for the language displayed on the
screen. For details, see page 19.
English
DVD Menu Options
Subtitle/Audio/DVD Menu
These menus contains various language
options for audio, subtitle and disc menu
which may be recorded on the DVD. For
details, see page 19.
Audio
Rating
Misc
B Press S T to select { Language }, then
press X.
C Press S T to select an item, then press
X to access.
Example: { OSD Language }
The options for the selected item
appears.
If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
D Use S T to select a setting and press
OK to confirm.
Example: { English }
The setting is selected and setup is
complete.
E To exit, press SETUP.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
29
01-43_dvp3126K_98_eng1.indd 29
2007-02-12 3:32:03 PM
DVD Menu Options (continued)
English
Using the Video setup menu
A Press SETUP on the remote control.
The system setup menu appears.
Language
Video
Audio
Aspect Ratio
: 4:3
View Mode
:Auto Fit
TV System
: PAL
NTSC
Video Out
:Interlaced
Component
Smart Picture
: Standard
Personal
Rating
Rating
Misc
Misc
B Press S T to select { Video }, then
press X.
C Press S T to select an item, then press
X to access.
Example: { TV System }
The options for the selected item
appears.
If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
Setting the Aspect Ratio
The picture shape can be adjusted to fit
your TV and the format must be available
on the playback disc. Otherwise, the TV
display will not affect the picture during
playback.
A In ‘Video’, press S T to select { Aspect
Ratio }, then press X.
{ 4:3 }
Select this if you have a
normal TV. A ‘widescreen’ display with
black bars on the top
and bottom will be
displayed on the TV screen.
{ 16:9 }
Select this for
wide-screen TV
(frame ratio
16:9).
B Use S T to select a setting and press
OK to confirm.
D Use S T to select a setting and press
OK to confirm.
Example: { PAL }
The setting is selected and setup is
complete.
E To exit, press SETUP.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
30
01-43_dvp3126K_98_eng1.indd 30
2007-02-12 3:32:03 PM
View Mode
Use view mode to scale an image that fits
to the TV screens’ width and height.
A In ‘Video’, press S T to select { View
Mode }, then press X.
{ Fill }
Select this to scale the image up or down
in horizontal and vertical directions
respectively to fill the screen height and
width.
{ Original }
Select this to fit the original screen size
(only for MPEG).
{ Height Fit }
Select this to scale the image up or down
in vertical direction to fit the screen
height.
{ Width Fit }
Select this to scale the image up or down
in horizontal direction to fit the screen
width.
{ Auto Fit }
Select this to take the minimum value of
horizontal and vertical fit scale ratio (like
letter box).
TV System
This menu contains the options for
selecting the color system that matches
the connected TV. For details, see page
18.
English
DVD Menu Options (continued)
Video Out
This setting allows you to toggle the
output of the video signal between
Interlaced and P-Scan (Progressive Scan).
A In ‘Video’, press S T to select { Video
Out }, then press X.
{ Interlaced }
Select this for Interlaced (YPbPr)
connection.
{ P-Scan }
Select this when you want to make
progressive scan (YPbPr) connection on
your DVD player to a progressive scan
TV.
B Use S T to select a setting and press
OK to confirm.
{ Pan Scan }
Select this to take the maximum value of
horizontal and vertical fit scale ratio.
B Use S T to select a setting and press
OK to confirm.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
31
01-43_dvp3126K_98_eng1.indd 31
2007-02-12 3:32:05 PM
DVD Menu Options (continued)
English
Smart Picture
This DVD player provides four
predefined sets of picture color settings.
A In ‘Video’, press S T to select { Smart
Picture }, then press X.
{ Standard }
Select this for a preset standard picture
setting.
{ Vivid }
Select this to make the picture brighter.
{ Cool }
Select this to make the picture softer.
{ Personal }
Select this to personalize your picture
color by adjusting the brightness,
contrast, tint and color (saturation).
B Use S T to select a setting and press
OK to confirm.
C If you select {PERSONAL}, then proceed
to steps D~G.
The setup menu appears.
TIPS:
Brightness
0
Contrast
0
Tint
0
Color
0
D Press S T to highlight one of the
following options.
BRIGHTNESS
Increase the value to brighten the picture
or vice versa. Choose zero (0) for
average setting.
CONTRAST
Increase the value to sharpen the picture
or vice versa. Choose zero (0) to
balance the contrast.
TINT
Increase the value to darken the picture
or vice versa. Choose zero (0) for
average setting.
COLOR
Increase the value to enhance the color
in your picture or vice versa. Choose
zero (0) to balance the color.
E Press W X to adjust the setting that best
suits your personal preference.
F Repeat steps D~E for adjusting other
color features.
G Press OK to confirm.
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
32
01-43_dvp3126K_98_eng1.indd 32
2007-02-12 3:32:05 PM
Using the Audio setup menu
A Press SETUP on the remote control.
The system setup menu appears.
Language
Language
Aspect
Front
Speakers
Ratio
: :4:3
Large
View Mode
Center
Speaker
: Auto
:NoneFit
Video
TV SystemSpeakers : NC
Surround
: None
Video
Out
Subwoofer
: :None
Audio
Digital
Output
Smart Picture
: Personal
: All
Night Mode
:Off
Rating
Rating
Down Sampling
:On
Misc
B Press S T to select { Audio }, then
press X.
C Press S T to select an item, then press
X to access.
Example: { Night Mode }
The options for the selected item
appears.
If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
D Use S T to select a setting and press
OK to confirm.
Example: { On }
The setting is selected and setup is
complete.
E To exit, press SETUP.
Front / Center / Surround Speakers
You can adjust the volume level setting
for individual speakers.
A In ‘Audio’, press S T to select { Front
Speakers }, { Center Speaker } or
{ Surround Speakers }, then press X.
English
DVD Menu Options (continued)
{ Large }
When connected speakers (except for
subwoofer) can produce low frequency
signals below 120Hz.
The range from 20Hz to 20KHz
{ Small }
When connected speakers (except for
subwoofer) can not produce low
frequency signals below 120Hz.
The range from 120Hz to 20KHz
{ None }
No sound output from the speakers.
Only applicable for center and rear
speakers.
B Use S T to select a setting and press
OK to confirm.
Subwoofer
This option is only available for
subwoofer connection.
A In ‘Audio’, press S T to select
{ Subwoofer }, then press X.
{ Present }
Select this option when a subwoofer is
connected.
{ None }
Select this option when no subwoofer is
connected.
B Use S T to select a setting and press
OK to confirm.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
33
01-43_dvp3126K_98_eng1.indd 33
2007-02-12 3:32:05 PM
DVD Menu Options (continued)
English
Digital Output
Select this if you connect to a
multichannel decoder/receiver.
A In ‘Audio’, press S T to select { Digital
Output }, then press X.
{ All }
Select this if the connected device has a
built-in multichannel decoder that
supports one of the multichannel audio
format (Dolby Digital, MPEG-2).
{ PCM }
Select this if the connected device is not
capable of decoding multichannel audio.
The DVD player will convert the Dolby
Digital and MPEG-2 multichannel signals
to PCM (Pulse Code Modulation).
{ Off }
To deactivate the digital audio output.
For example, if you use the FRONT (L/R)
AUDIO OUT sockets to connect to a TV
or stereo system.
B Use S T to select a setting and press
OK to confirm.
Tips:
– If { Digital Output } is set to { All }, all
audio settings except MUTE are invalid.
– If { Digital Output } is set to { All } while
playback MPEG, MP3/WMA files, the player
will output PCM signals.
Night Mode
This mode optimizes playback of sound at
low volume. High volume outputs will be
softened and low volume outputs are
brought upward to an audible level.
A In ‘Audio’, press S T to select { Night
Mode }, then press X.
{ On }
Select this to set low volume output. This
feature is only available for movie discs
with Dolby Digital mode.
{ Off }
Turns off night mode feature. Select this
to enjoy the surround sound with its full
dynamic range.
B Use S T to select a setting and press
OK to confirm.
Down Sampling
You can enable and disable the digital
signal for better sound output quality.
A In ‘Audio’, press S T to select { Down
Sampling }, then press X.
{ On }
Playback a disc recorded at the sampling
rate of 48kHz.
{ Off }
Playback a disc recorded at the sampling
rate of 96kHz. This rate can only be
achieved in Stereo-Classic (Flat) mode.
B Use S T to select a setting and press
OK to confirm.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
34
01-43_dvp3126K_98_eng1.indd 34
2007-02-12 3:32:05 PM
Using the Rating setup menu
A Press SETUP on the remote control.
The system setup menu appears.
Language
Aspect
Parental
Ratio
control
: 4:3
: 8.Aduit
Set Password
Video
Audio
Rating
Misc
B Press S T to select { Rating }, then
press X.
C Press S T to select an item, then press
X to access.
Example: { Parental control }
The options for the selected item
appears.
If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
D Use S T to select a setting and press
OK to confirm.
Example: { 8 Adult }
The setting is selected and setup is
complete.
E To exit, press SETUP.
Rating level settings
Depending on the DVD, you may be
asked to change the parental level while
playing the disc. The rating levels are
from 1 to 8 and are country dependent.
You can prohibit the playing of certain
discs that are not suitable for your
children, or have certain discs played with
alternative scenes.
English
DVD Menu Options (continued)
A In ‘Rating’, press S T to select { Parental
control }, then press X.
B Use the alphanumeric keypad 0-9 to
enter the four-digit password (see page
36 ‘Changing the Password’, then press
X.
{ 1.Kid Safe }
Childsafe; acceptable for viewers of all
ages.
{ 2. G }
General Audience; recommended as
acceptable for viewers of all ages.
{ 3. PG }
Parental Guidance suggested.
{ 4. PG – 13 }
Unsuitable for children under age 13.
{ 5. PG – R }
Parental Guidance; recommended that
parents restrict children under 17 from
viewing.
{ 6. R }
Restricted; recommended only when
supervised by a parent or adult guardian.
{ 7. NC – 17 }
No Children under age 17; not
recommended viewing for children under
age 17.
{ 8. Adult }
Mature Material; should be viewed only
by adults due to graphic sexual material,
violence or language.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
35
01-43_dvp3126K_98_eng1.indd 35
2007-02-12 3:32:05 PM
DVD Menu Options (continued)
English
C Use S T to select a rating level and
press OK to confirm.
Select { 8 Adult } to disable parental
level and allow all discs to play.
DVDs that are rated higher than the level
you selected will not play unless you
enter your four-digit password.
Tips:
– This feature will not limit viewing if the
disc manufacturer did not code the disc.
– VCD, SVCD, CD have no level indication,
so parental control has no effect on these
type of discs. This also applies to most illegal
DVDs.
– Some DVDs are not coded with a rating
though the movie rating may be printed on
the disc cover. The rating level feature does
not prohibit play of such discs.
Changing the Password
You need to enter your four-digit
password to play a prohibited disc or if
prompted for a password.
A In ‘Rating’, press S T to select { Set
Password }, then press OK.
You will be prompted to enter your
four-digit password.
Enter Password
B Use the alphanumeric keypad 0-9 to
enter the four-digit password.
When doing this for the first time,
enter the default password ‘0000’.
If you forget your old four-digit
password, enter the default password
‘0000’.
C Press OK again to enter the new fourdigit password.
The new four-digit password will now
take effect.
Enter New Password
D Press OK to confirm.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
36
01-43_dvp3126K_98_eng1.indd 36
2007-02-12 3:32:06 PM
Using the Misc
(Miscellaneous) setup menu
A Press SETUP on the remote control.
The system setup menu appears.
Language
Language
Video
Audio
Rating
Rating
Misc
Restoring to the original settings
Setting the { Default } function will reset
all options and your personal settings to
the factory defaults, except your
password for rating level.
English
DVD Menu Options (continued)
A In ‘Misc’, press S T to select { Use
Default Settings }, then press OK.
The menu will appear.
Use Default Settings
Volume
60
Left
15
Right
15
Center
15
Left Srnd
15
Right Srnd
15
Subwoofer
15
Center Spkr Delay : No Delay
B Press S T to select { Misc }, then press
X.
C Press S T to select an item, then press
OK to access.
Example: { Use Default Settings }
The options for the selected item
appears.
If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
Use Default Settings
YES
NO
{ Yes }
Select this to reset to factory default
settings.
{ No }
Select this to close the menu.
B Use W X to select a setting and press
OK to confirm.
D Use S T to select a setting and press
OK to confirm.
Example: { No }
The setting is selected and setup is
complete.
E To exit, press SETUP.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
37
01-43_dvp3126K_98_eng1.indd 37
2007-02-12 3:32:06 PM
DVD Menu Options (continued)
English
Volume Control
A In ‘Misc’, press S T to select { Volume
60 }.
B Press W X to adjust the speaker’s
volume that best suits your personal
preference.
The range from { 0 – 63 }
C Press S T, then press W X to adjust
the volume corresponding speakers from
0-15.
TIPS:
Speaker Delay
Delay times setting are related to the
listening position or distance for center
and surround speakers.
A In ‘Misc’, press S T to select { Center
Sprk Delay } or { Surr Sprk Delay },
then press OK.
B Use S T to move the slider to adjust
the delay times of the audio output from
the corresponding speakers.
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
38
01-43_dvp3126K_98_eng1.indd 38
2007-02-12 3:32:06 PM
English
Others
Software upgrade
Periodically Philips will issue software
upgrade to enhance your user
experience.
IMPORTANT!
– Power supply must not be
interrupted during upgrade!
To check the current software version of
this DVD player;
A Press OPEN/CLOSE ç on the DVD
player to open the disc tray.
The disc tray will open.
B Press numeric keypad ‘966’ on the
remote control.
The software installed in the DVD
player appears on the TV screen.
To download and install the latest
software to the DVD player;
A Visit the Philips website ‘www.philips.
com/support’ to check the availability of
the latest software upgrade.
B Download the software to a CD-R.
C Insert the CD-R to the disc slot.
The menu appears.
Firmware Update
Erase and Program
Start
Cancel
Firmware Update
Programming, please wait......
Do not switch the player off!
D Press W X to select { START }, then
press OK to confirm.
The latest software will be
downloaded in the DVD player.
39
01-43_dvp3126K_98_eng1.indd 39
2007-02-12 3:32:07 PM
Troubleshooting
English
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If
you are unable to remedy a problem by following these hints, consult your dealer or
Philips for help.
Problem
Solution
No power.
– Press STANDBY-ON button on the front of the DVD
player to turn on the system.
– Make sure the AC outlet has power.
Remote control does not work.
– Aim the remote control directly at the sensor on the front
of the DVD player (not towards TV).
– Remove any obstacles between DVD player and the remote
control.
– Batteries are weak, replace the batteries.
– Check the polarities of the batteries are as indicated on the
remote control (± signs).
No picture.
– Turn on your TV and set to the correct Video In channel
for the DVD player. You may go to Channel 1 on your TV,
then press the channel down button on your TV’s remote
control until you see the TV program.
– Check the video connection between the DVD player and
the TV.
The picture is distorted or black &
white during playback.
– The disc does not match with the TV color system standard
(PAL/NTSC).
– The disc is dirty, clean the disc.
– Sometimes a small amount of picture distortion may
appear. This is not a malfunction.
– To deactivate progressive scan function manually;
1) Turn off your TV progressive scan mode (or set to
interlaced mode)
2) Press OPEN/CLOSE to open the DVD player disc tray.
3) Press the alphanumeric keypad ‘1’ for few seconds.
No sound.
– Check the audio connections, the red and white jacks are
connected correctly.
– Set the Digital output correctly, based on the equipment you
connected to the DVD player.
Disc does not play.
– Insert the disc with the label facing up.
– Wrong region code.
– Wrong disc type. Read chapter “Playback from Disc Playable discs” for details.
– Make sure the disc is not scratched or warped. Clean the
disc or replace a new one.
– Check if the disc is defective by trying another disc.
The aspect ratio of the screen cannot
be changed.
– The aspect ratio is fixed on the DVD disc.
– Depending on the TV, it may not be possible to change the
aspect ratio.
Need Help? Visit us at www.philips.com/support
40
01-43_dvp3126K_98_eng1.indd 40
2007-02-12 3:32:07 PM
Problem
Solution
Not able to select some items in the
setup/system menu.
– Press STOP button twice before selecting the setup/system
menu.
– Depending on the disc availability, some menu items cannot
be selected.
The DVD player does not start
playback.
– Insert a readable disc with the playback side facing down.
– Check the disc type, color system (PAL/NTSC) and region
code.
– Check for any scratches or smudges on the disc.
– Press SETUP to turn off the setup menu screen.
– You may need to enter the password in order to change the
parental rating level or to unlock the disc for playback.
– Moisture may have condensed inside the system. Remove the
disc and leave the system turned on for about an hour.
– Disconnect the power cord from the power outlet for a few
minutes. Reconnect the power cord and try to operate again
as usual.
Picture freezes momentarily during
playback.
– Check the disc for fingerprint/scratches and clean with a soft
cloth wiping from center to edge.
Unable to select Progressive Scan on/
off.
– Check that the output of the video signal is turn to
{ Interlaced }.
English
Troubleshooting (continued)
Need Help? Visit us at www.philips.com/support
41
01-43_dvp3126K_98_eng1.indd 41
2007-02-12 3:32:07 PM
Specifications
English
TV STANDARD(PAL/50Hz) (NTSC/60Hz)
Number of lines 625
525
Playback
Multistandard (PAL/NTSC)
VIDEO PERFORMANCE
Video DAC
12 bit, 108 MHz
YPbPr
0.7 Vpp ~ 75 ohm
Video Output
1Vpp ~ 75 ohm
VIDEO FORMAT
Digital
MPEG 2 for DVD,SVCD
Compression
MPEG 1 for VCD
DVD
50Hz
Horiz. resolution 720 pixels
Vertical resolution 576 lines
60Hz
720 pixels
480 lines
VCD
50Hz
Horiz. resolution 352 pixels
Vertical resolution 288 lines
60Hz
352 pixels
240 lines
AUDIO FORMAT
Digital
MPEG/ AC-3/
PCM
MP3(ISO 9660)
compressed
Digital
16, 20, 24 bits
fs, 44.1, 48, 96 kHz
96, 112, 128,
256. 320kbps &
variable bit rate
fs, 32, 44.1, 48 kHz
Analog Sound Stereo
Dolby Surround compatible downmix from Dolby
Digital multi-channel sound
AUDIO PERFORMANCE
DA Converter
24 bit, 192 kHz
DVD
fs 96 kHz
4Hz- 44kHz
fs 48 kHz
4Hz- 22kHz
SVCD
fs 48 kHz
4Hz- 22kHz
fs 44.1kHz 4Hz- 20kHz
CD/VCD
fs 44.1kHz 4Hz- 20kHz
Signal-Noise (1kHz)
> 90 dB
Dynamic range(1kHz)
> 80 dB
Crosstalk (1kHz)
> 70 dB
Distortion/noise (1kHz)
> 65 dB
MPEG MP3
MPEG Audio L3
CONNECTIONS
YPbPr Output
Cinch 3x
Video Output
Cinch (yellow)
Audio Output(L+R)Cinch (white/red)
Digital Output
1 coaxial
IEC60958 for CDDA / LPCM
IEC61937 for MPEG 1/2,
Dolby Digital
6 channal analog output
Audio Front L/R Clinch (white/red)
Audio Rear L/R Clinch (white/red)
Audio Center
Clinch (blue)
Audio Subwoofer Clinch (black)
CABINET
Dimensions (w x h x d)
Weight
360 x 37 x 209 mm
Approximately 1.35 kg
POWER CONSUMPTION
Power Supply Rating
110V – 240V;
50/60Hz
Power consumption
< 10 W
Power consumption in
<1W
Standby mode
42
01-43_dvp3126K_98_eng1.indd 42
2007-02-12 3:32:07 PM
Analog: Sound that has not been turned into
numbers. Analog sound varies, while digital sound
has specific numerical values. These jacks send
audio through two channels, the left and right.
Aspect ratio: The ratio of vertical and
horizontal sizes of a displayed image. The
horizontal vs. vertical ratio of conventional TVs. is
4:3, and that of wide-screens is 16:9.
AUDIO OUT Jacks: Jacks on the back of the
DVD System that send audio to another system
(TV, Stereo, etc.).
Bit Rate: The amount of data used to hold a
given length of music; measured in kilobits per
seconds, or kbps. Or, the speed at which you
record. Generally, the higher the bit rate, or the
higher the recording speed, the better the sound
quality. However, higher bit rates use more space
on a Disc.
Chapter: Sections of a picture or a music piece
on a DVD that are smaller than titles. A title is
composed of several chapters. Each chapter is
assigned a chapter number enabling you to locate
the chapter you want.
Component Video Out Jacks: Jacks on the
back of the DVD System that send high-quality
video to a TV that has Component Video In jacks
(R/G/B, Y/Pb/Pr, etc.).
Disc menu: A screen display prepared for
allowing selection of images, sounds, subtitles,
multi-angles, etc recorded on a DVD.
Digital: Sound that has been converted into
numerical values. Digital sound is available when
you use the DIGITAL AUDIO OUT COAXIAL or
OPTICAL jacks. These jacks send audio through
multiple channels, instead of just two channels as
analog does.
Dolby Digital: A surround sound system
developed by Dolby Laboratories containing up to
six channels of digital audio (front left and right,
surround left and right, center and subwoofer).
JPEG: A very common digital still picture format.
A still-picture data compression system proposed
by the Joint Photographic Expert Group, which
features small decrease in image quality in spite of
its high compression ratio.
MP3: A file format with a sound data
compression system. ‘MP3’ is the abbreviation of
Motion Picture Experts Group 1 (or MPEG-1)
Audio Layer 3. By using MP3 format, one CD-R or
CD-RW can contain about 10 times as much data
volume as a regular CD can.
English
Glossary
Parental Control: A function of the DVD to
limit playback of the disc by the age of the users
according to the limitation level in each country.
The limitation varies from disc to disc; when it is
activated, playback will be prohibited if the
software’s level is higher than the user-set level.
PCM (Pulse Code Modulation): A system for
converting analog sound signal to digital signal for
later processing, with no data compression used in
conversion.
Playback control (PBC): Refers to the signal
recorded on video CDs or SVCDs for controlling
reproduction. By using menu screens recorded on
a Video CD or SVCD that supports PBC, you can
enjoy interactive-type software as well as software
having a search function.
Progressive Scan: It displays all the horizontal
lines of a picture at one time, as a signal frame.
This system can convert the interlaced video from
DVD into progressive format for connection to a
progressive display. It dramatically increases the
vertical resolution.
Region code: A system for allowing discs to be
played back only in the region designated
beforehand. This unit will only play discs that have
compatible region codes. You can find the region
code of your unit by looking on the product label.
Some discs are compatible with more than one
region (or ALL regions).
Title: The longest section of a picture or music
feature on DVD, music, etc., in video software, or
the entire album in audio software. Each title is
assigned a title number enabling you to locate the
title you want.
TV OUT jack: Jack on the back of the DVD
System that sends video to a TV.
WMA: Windows Media Audio. Refers to an
audio compression technology developed by
Microsoft Corporation. WMA data can be
encoded by using Windows Media Player version 9
or Windows Media Player for Windows XP. Files
are recognized by their file extension “WMA.”
43
01-43_dvp3126K_98_eng1.indd 43
2007-02-12 3:32:07 PM

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement