Philips CT9A9WSLV 9@9w Mobile Phone 1.93" Titan Black, Titan Coco

Discover Your Phone
Side volume
keys
+
-
Left softkey
Navigation
and , key
Pick up key
Alphanumeric
keypad
How to ...
262,000 colour
main screen
Right
softkey
Switch the phone
On/Off
Long press ).
Store numbers in
Phonebook
Enter the phone number and
press L to save.
Make a call
Enter the phone number with
the keypad and press ( to
dial.
Access Call logs
Press ( in idle mode. Call
logs display your recent
Missed Calls, Dialed Calls and
Received Calls.
Answer a call
Press ( when your phone
rings.
End a call
Press ).
Reject a call
Press ) when your phone
rings.
Adjust earpiece
volume
Press the up or down side
volume keys during a call.
Adjust ringtone
volume
Press the + or - side volume
keys in idle mode.
Hang up and
on/off key
Headset/Charger
connector/
USB Port
Micro SD
card slot
Microphone
Philips continuously strives to improve its
products.Therefore, Philips reserves the rights to revise
this user guide or withdraw it at any time without prior
notice. Philips provides this user guide “as is” and does
not accept, except as required by applicable law,
liability for any error, omission or discrepancy between
this user guide and the product described. The device is
meant to be connected to GSM/GPRS networks.
Access Main Menu
Press L Menu or press , in
idle mode.
Switch to silent
mode
Long press * key in idle
mode.
Turn Audio Player
on/off
Press R in idle mode.
Access Phone Book
List
Press - in idle mode.
Access Shortcut
Press < in idle mode.
Access SMS editor
Press > in idle mode.
Access Dual SIM
menu
Press + in idle mode.
Return to previous
menu
Press R.
Quickly return to
idle mode
Press ).
Softkeys
The left and right soft keys L and R located at the
top of the keypad allow you to select the
corresponding options that appear on the screen
immediately above them, including in-call options.
The functions associated with these keys may vary
according to the current context.
Main Menu
Fun & Games
Services
page 44
page 51
Messaging File Manager
page 20
page 59
Audio Player Multimedia
page 53
page 40
Business
Phone Book
page 47
User Profiles Connectivity Call History
page 46
page 56
page 31
page 17
Settings
page 33
1
Presented in the form of a grid, the Main Menu
enables access to the various features available in your
mobile phone. The table above summarises the
arrangement of the Main Menu.
Press L in idle mode to access the Main Menu and use
the navigation keys of which the directions are
represented in this user guide as -, +, < or > to browse
the icons and lists. Within lists, press L to access the
options associated with the selected item, press R
Back to go back one level.
2
Table of contents
1. Getting Started ..................................6
4. Phone Book .....................................17
Insert the SIM card and Battery ....................6
Switch on the phone ........................................7
Charge the battery ...........................................8
Shortcuts function ............................................8
Dual SIM ..............................................................8
Search for a contact in the phonebook .... 17
Manage contacts ............................................. 17
Add new entry ............................................... 17
Copy all ............................................................ 18
Delete ............................................................... 18
Caller Group ................................................... 18
Extra Number ................................................ 19
Settings ............................................................. 19
Caller Picture .................................................. 19
Caller Ring Tone ............................................ 19
2. Calling ..................................................9
Make a call ..........................................................9
Answer and end a call ......................................9
Call handsfree ....................................................9
Options during a call ..................................... 10
Adjust earpiece volume ................................ 10
Speed Dial ........................................................ 10
Make an emergency call ............................... 11
Handle multiple calls
(Network Dependent) ................................. 11
3. Text or number Entry ...................13
Input Method .................................................. 13
Function keys .................................................. 13
Multitap ABC/abc Input ................................ 13
T9® text input ................................................ 14
Symbol Input ................................................... 16
5. Messaging ..........................................20
Messages .......................................................... 20
E-mail ................................................................ 27
Instant Messages ............................................ 29
Voice Mail Server ........................................... 29
Broadcast Messages ...................................... 30
6. Call History ......................................31
Missed Calls .................................................... 31
Dialed Calls ..................................................... 31
Received Calls ................................................ 31
Delete Call Log .............................................. 31
3
Call Time .......................................................... 32
Call Cost (Network dependent) ............... 32
SMS Counter ................................................... 32
GPRS Counter ................................................ 32
7. Settings ............................................. 33
Phone Setup .................................................... 33
Dual SIM ........................................................... 35
Call Setup ......................................................... 35
Security Setup ................................................. 37
Sound Effects ................................................... 39
Restore Factory Settings .............................. 39
8. Multimedia ....................................... 40
ImageViewer .................................................... 41
Video Player .................................................... 41
Video Recorder .............................................. 42
Photo Editor .................................................... 43
10. User Profiles ................................. 46
11. Business .......................................... 47
Calendar ........................................................... 47
To Do List ....................................................... 47
Alarm ................................................................ 48
World Clock ................................................... 48
Extras ................................................................ 48
12. Services .......................................... 51
STK ................................................................... 51
WAP ................................................................. 51
Data Accounts ................................................ 52
13. Audio Player .................................. 53
Audio Player .................................................... 53
Sound Recorder ............................................. 54
Melody Composer ......................................... 54
9. Fun & Games ................................... 44
14. Connectivity .................................. 56
Java ..................................................................... 44
Java Settings ..................................................... 44
Java Default Security ...................................... 44
Games ............................................................... 45
15. File Manager .................................. 59
4
Bluetooth ......................................................... 56
Network Setup ............................................... 57
USB ................................................................... 57
Icons & symbols ...................................60
Precautions ...........................................61
Troubleshooting ..................................66
Philips Authentic Accessories ..........68
Trademark Declaration .....................69
Specific Absorption Rate
Information ...........................................70
Limited warranty .................................71
Declaration of conformity .................74
5
1. Getting Started
to lift up the door of the battery compartment as
shown below.
Congratuations on your purchase and welcome to
Philips!
To fully benefit from the support that Philips offers,
register your product at www.philips.com/welcome.
Please read the safety instructions in the “Precautions”
section before using your phone.
To use your phone, you must insert a valid SIM card
supplied by your network operator or retailer. The
SIM card contains your subscription information,
your mobile phone number and a memory in which
you can store phone numbers and messages. For more
information, see “Phone Book” on page 17.
Remove the battery
Lift up the battery from the top to remove it.
Insert the SIM card and Battery
Follow the steps below to insert your new SIM card.
Remember to switch off your mobile phone before
removing the battery.
Remove the back cover
To insert the SIM card, you must first remove the
back cover. Press on the back cover with your thumb
and slide the cover upwards. Then use your free hand
6
Insert the SIM card
Insert the SIM card into one of the two SIM card
slots, making sure that the clipped corner of the card
is pointing the right direction and that the gold
contacts are facing downwards.
Getting Started
Remove the SIM card
Pull the remover rib to take out the SIM card as
shown below.
Replace the back cover
Replace the back cover by sliding it down into its slot,
until it stops.
Replace the battery
Place the battery back into its slot, with the gold
contacts of the battery facing the corresponding gold
contacts on the side of the phone. The gold contacts
on the phone are positioned on the right hand side of
the phone, besides the SIM card slot.
Remove the protective film covering the screen before
using the phone.
Switch on the phone
To switch on the phone, long press ) key. Enter the
PIN code if required. The PIN code is a 4- to 8-digit
secret code of your SIM card. It is preconfigured and
Getting Started
7
communicated to you by your network operator or
retailer. For more information on PIN codes, see
“Call Setup” on page 35.
If you enter an incorrect PIN code three times in
succession, your SIM card will be locked. To unlock it, you
must obtain the PUK code from your network operator.
Charge the battery
Your phone is powered by a rechargeable battery. A
new battery is partially charged and a sound alert will
warn you when the battery reaches low. Once you have
installed the battery, you can start charging the phone.
Plug in the charger connector as shown below. Then
plug the other end into a mains AC power socket.
The battery symbol indicates the state of charge.
During charging, the charge indicators will scroll. It
takes around 3 hours to fully charge the battery.
When all the scroll bars are steady, the battery is fully
charged. You can then disconnect the charger.
Depending on the network and condition of use, talk
time and stand-by time can go up to 8 hours and 1
month respectively.
Keeping the charger plugged to the mobile phone
when the battery is fully charged will not damage the
battery.
The only way to turn off the charger is to unplug it, so use
an easily accessible AC power socket. You can connect
the charger to an IT supply.
Shortcuts function
Your phone provides 10 quick access to the functions
on your phone. You can modify the shortcuts
according to your needs. For more information, see
“Shortcuts” on page 34.
Dual SIM
The dual SIM feature in 9@9w mobile phone allows
you to install two different SIM cards into one mobile
phone. You can switch between two numbers/
networks. For more information, please refer “Dual
SIM” on page 35.
8
Getting Started
2. Calling
Make a call
From idle screen
1.
In idle mode, enter the phone number with the
keypad. To correct an error, press R.
2. Press ( to dial the number.
3. Press ) to hang up.
To make an international call, long press 0 to insert
the international prefix “+”.
Using the phonebook
1.
2.
3.
Press - in idle mode.
Select a contact from the list, press ( to dial. To
select a different number, press + or - (see
“Phone Book” for more information).
Press ) to hang up.
IP Dial (China only)
You may select IP dial. When you select IP dial option,
the mobile phone will automatically add the IP special
service number preset by you in front of the phone
number and then make IP dial. You can also long
press ( to activate IP dial.
Calling
When you have entered several IP special service
numbers, you will be prompted to verify them to avoid
adding them repeatedly.
Answer and end a call
When there is an incoming call, the number of the
caller may be displayed if the caller has chosen to
display his or her identity. If the number is stored in
the phonebook, the corresponding name will be
displayed instead of the number.
• To answer the call: press ( or ,.
• To reject the call: press ). If you have activated Call
Divert, the call will be diverted to another number or
your voice mail.
• To hang up: press ).
The phone will not ring when it is in silent mode.
If you have selected Any Key, you can answer a call by
pressing any key, except ) and R.
Call handsfree
For your own comfort and safety, ensure that you
move the phone away from your ear when calling
handsfree, especially when increasing the volume.
9
Press R H-Free during a call to activate handsfree
mode. To deactivate handsfree, press R again to
switch off handsfree mode.
Options during a call
During a call, press L Options to access the following
options:
- Put the call on Hold
- End the current call
- Make a New call
- Access Phone Book
- Send and Receive messages
- Sound Recorder
- Mute/Unmute the call
- enabling DTMF (the touch tone dialing system)
Sound Recorder
In most countries, recording of telephone conversation
is subject to legislation. We advise you to notify the
caller if you intend to record the conversation and only
do so if they agree. You should also ensure confidentiality
of the recordings.
To record a conversation during a call, press L and
select Sound Recorder. Recorded sound is saved in
*.amr format and stored in Sound Recorder of Audio
Player menu. (see “Sound Recorder” on page 54).
10
Mute or unmute a call
During a call, press L Options and select Mute or
Unmute. If you select Mute, the microphone will be
deactivated.
When you switch from one call to another, muting
will be cancelled.
Adjust earpiece volume
During a call, press the volume "+" or "-" side keys to
increase or decrease the volume.
Speed Dial
Speed dial via SIM phonebook
If you know the memory location number of the
contact you wish to call (for example: memory
location 5), you can simply enter 5# in idle mode to
to display the pre-set contact, then press ( to call.
Speed dial via call logs
In idle mode, press ( to access Call Logs. Select a number
you wish to call and press ( to dial the number.
The default setting of Speed Dial is Off. To activate
this function, you need to activate it in the phone
settings menu.
Calling
Make an emergency call
You can make an emergency call anytime, irrespective
of whether the mobile phone has been registered on
the network.
1. In idle mode, enter the emergency call number
(specific number in the caller's country).
2. Press (.
Note that an emergency call will not be stored in the
call record.
3.
Alternatively, after switching on the mobile
phone and entering the PIN number, press R
SOS to go to the emergency call screen. If there is
no SIM card, pressing R SOS can also bring you
to the emergency call screen, displaying the call
number. Then press ( or the OK softkey to
directly make an emergency call and the dial
animation will be displayed.
Handle multiple calls (Network
Dependent)
You can handle two or more calls at the same time, as
well as make conference calls with your phone. The
availability of this feature is dependent on your
network operator and/or your subscription.
Calling
Make a second call
You can make a second call when there is an active call
or with a call on hold. While on the phone, dial the
number (or select a contact from the phonebook) and
press (. The first call is put on hold and the second
number is dialled. You can then press L to access the
following options:
• Swap to toggle between 2 calls.
• Conference to introduce the caller into a conference
call.
• Transfer to connect the two calls. You are
disconnected when the transfer is completed.
• End Single to disconnect one party from the call.
• Phone book to access the contact list.
• Message Center to send and receive messages.
• Sound Recorder to record the phone conversation.
• Mute to deactivate the microphone.
• DTMF to activate the touch tone dialing system.
Answer a second call
When you receive a second call while already in
communication, the phone will emit a beep tone and
the screen displays information about the incoming
call. You can then:
Press (
To answer the call (the first one is
put on hold).
11
Press R or )
To reject the call.
Press L
Options
To access the options list. You
can select End to end the current
call and answer the incoming call.
To receive a second call, you must first deactivate Call
Divert (see “Call Divert” on page 35)and activate
Call Waiting (see “Call Waiting” on page 35).
12
Calling
3. Text or number Entry
*
Enter symbols.
Input Method
#
Switch input mode.
Your phone supports 7 types of input methods:
Multitap ABC/abc
T9 ABC/abc
T9 PinYin
Simplified Chinese stroke
Traditional Chinese Zhuyin
Numeric
Symbols
Multitap ABC/abc Input
You can select in the option list the appropriate input
method to enter English letters, words, symbols and
numbers. Icons appearing on the screen indicate the
active input mode.
Function keys
R
Delete the characters on the left of the
cursor or exit from editing mode.
+/-/</> Move the cursor, select a letter, word or
symbol from the list, or scroll down a list.
)
Return to idle mode.
L
Select the highlighted word from the list or
enter Options menu.
Text or number Entry
1.
2.
Press once on the numeric key (2 to 9) to
enter the first letter on the key, press twice to
enter the second letter on the key, so on and so
forth. If the letter you wish to enter and the one
you have just entered are on the same key, just
wait for a few seconds for the cursor to re-appear.
Press R to delete the characters on the left of
the cursor.
Example: how to enter the word "home":
Press 4, 4 (GHI) 6, 6, 6 (MNO), 6
(MNO), 3, 3 (DEF). Press , when the message is
completed.
You can press key 0 to insert a space in ABC/abc
Multitap input mode.
The letters located on each key are as follows:
Key Characters in the order displayed
1 .,-?!@:#$/_1
2 abc2
3 def3
13
4
5
6
7
8
9
0
ghi4
jkl5
mno6
pqrs7
tuv8
wxyz9
0
T9® text input
T9® Predictive Text Input is an
intelligent editing mode for entering text
on a mobile phone. It allows you to enter
Tegic Euro. Pat. text more quickly by anticipating the
App. 0842463
word you want to enter based on the
keys you have pushed. You press once on the key
corresponding to each letter needed to spell a word
and T9® suggests a word based on your keystrokes. If
several words are available, the first word in the list is
displayed and highlighted. Press +/- or L to browse
the list and press , to insert the word.
T9 ABC/abc Input
Smart English input method offers a faster way for
you to enter English words.
14
1.
2.
3.
You only need to press once on the numeric key
(2 to 9) corresponding to each letter needed
to spell a word. As you enter the letters, the
words displayed on the screen will be updated
accordingly.
Press R to delete the entries on the left of the
cursor.
Use + and - to select the desired word and press
L to enter it.
Examples: how to enter the word "home":
1.
2.
3.
Press 4, 6, 6, 3. The screen displays the
first word of a list: Good.
Press - to scroll and select Home.
Press , to confirm.
T9 PinYin Input (China & Hong Kong only)
This is an intelligent editing mode that not only
allows you to press only once on a key corresponding
to each letter needed to form a character, but is also
equipped with association input feature. Keystrokes
are analysed and all the possible pinyin combinations
will be displayed at the bottom of the screen.
Using T9 PinYin input method
1. Enter the pinyin letters accordingly. Press once
on the key corresponding to the pinyin letter
without having to consider its position on the
Text or number Entry
2.
3.
key. As you enter the letters using your keypad,
the pinyin combinations on the screen will be
updated accordingly.
Use the navigation keys to select your desired
pinyin combination and press L to select the
candidate line. Press < or > to select the character
(the selected pinyin character will be
highlighted) and press the L to enter the
character. If the desired character is not on the
current list, press + or - to check from the list.
Enter the association character: As soon as you
have selected and entered a character, the
candidate list will be updated and a list of
association characters will be displayed. Use the
navigation key to select the desired association
character and press to L confirm entry. If you
do not need to enter the association character,
simply press R to exit, or enter the new pinyin
letters directly.
Simplified Chinese Stroke Input (China &
Hong Kong only)
Using Stroke input method
1. Enter the strokes: Enter the strokes of the
chinese character according to its stroke
sequence. When you press the keys
corresponding to the required strokes, the
Text or number Entry
2.
3.
strokes will display on the screen. The phone
will display the candidate characters
corresponding to the strokes you have entered.
As you enter the strokes, the candidate characters
on the screen will be updated accordingly.
Enter character: Use the navigation key to select
the required chinese character from the
candidate list. Press L to input the chinese
character and press R to clear the strokes you
have entered.
Enter associate character: As soon as you have
selected and entered a character, the candidate
list will be updated and a list of association
characters will be displayed. Use the navigation
key to select the desired association character and
press to L confirm entry. If you do not need to
enter the association character, simply press R
to exit, or enter the new strokes directly.
Traditional Chinese Zhuyin Input (China,
Hong Kong & Taiwan only)
Using Zhuyin input method
1. Enter the zhuyin letters accordingly. Press once
on the key corresponding to the zhuyin letter
without having to consider its position on the
key. As you enter the letters using your keypad,
15
2.
3.
the zhuyin combinations on the screen will be
updated accordingly.
Use the navigation keys to select your desired
zhuyin combination and press L to select the
candidate line. Press < or > to select the character
(the selected zhuyin character will be
highlighted) and press the L to enter the
character. If the desired character is not on the
current list, press + or - to check from the list.
Enter the association character: As soon as you
have selected and entered a character, the
candidate list will be updated and a list of
association characters will be displayed. Use the
navigation key to select the desired association
character and press to L confirm entry. If you
do not need to enter the association character,
simply press R to exit, or enter the new zhuyin
letters directly.
Symbol Input
Select Input Symbols from the input method list or
press * to enter punctuation or symbols. Use the
navigation keys to select the desired punctuation or
symbol and press L to enter it. Press - to scroll down
the list of punctuation or symbols.
Numeric input
1.
2.
16
Press the numeric keys (0 to 9) to enter the
numbers corresponding to the keys.
To delete a number, press R.
Text or number Entry
4. Phone Book
Contacts are stored in one of the two available
phonebooks: SIM phonebook (located on your SIM
card, by which the number of entries you can store
depends on the card capacity) or the Smart
Phonebook (located on your phone, which allows you
to store up to 300 names). When adding new
contacts, the contacts will only be added to the
phonebook you have selected.
Search for a contact in the
phonebook
Quick Search option
1.
2.
Select Phone Book in the main menu and select
Quick Search to access the Phone Book List.
Enter the name of the contact.
Search Entry option
1.
2.
Enter Phone Book in the main menu and select
Search Entry.
Enter the name of the contact, press L Options
and press L.
Phone Book
Phone Book List
Press - in idle mode to access phone book list and
press the key that corresponds to the letter you wish to
search (e.g. press 8 key three times to access the letter
V). The first record starting with this letter in the list
will be selected.
Manage contacts
Select a name from the phone book list and press (
to dial the number or press L Options to access the
following options:
IP Dial
Send SMS
Edit
Send MMS
Copy
View
Duplicate
Delete
Move
Send vcard
Add new entry
1.
2.
Select Phone Book in the main menu and select
Add New Entry. Select the storage location and
press L.
If you select To SIM, you need to enter the Name
and Number. After you have entered the name,
press L. Then enter the phone number and
press L.
17
3.
If you select To Phone, the procedures will be the
same as above. You can enter the contact’s Name,
Number, Home Number, Company Name, Email Address, Office Number, Fax Number and
Birthday. You can also Associate Picture,
Associate Sound, Associate video as well as
Associate Caller Group to the contact. Press L
to confirm. The phone will display a notification
to confirm that the contact has been saved.
For symbols such as @, /, . etc, press 1.
Copy all
You can copy all the contacts in your phone to your
SIM card and vice-versa.
1. Select Phone Book in the main menu, select Copy
All and press L.
2. Select From SIM or From Phone, and press L.
3. Confirmation prompts will be displayed on the
screen. Select L Yes to confirm the operation or
select R No to cancel the operation.
When you copy telephone number entries from your
mobile phone onto your SIM card, only the names and
telephone numbers will be copied.
18
Delete
You can select From SIM or From Phone to delete all
the entries in the SIM card or mobile phone
phonebook respectively. You can select One By One to
delete a telephone number.
Delete all the entries from SIM card or phone. You
need to input a password for the delete all feature. The
default password is "0000".
Caller Group
This option allows you to group the contacts in the
phonebook for more efficient management of your
contacts.
1. Select Phone Book in the main menu and select
Caller Group.
2. Select a group and press L.
3. Select the option for which you wish to modify
its settings.
You can set the following options:
Group name Set the group name.
Ring type
Set the ring tone for incoming calls
from the contacts in the caller group.
Phone Book
Picture
Member List
Set the icon to be displayed on the
screen when there is an incoming call
from the contacts in the caller group.
Add or delete members of the caller
group.
Extra Number
Owner Number
The Owner Number option should contain your own
phone number. If not, we recommend that you enter
your own mobile phone number and other relevant
information.
Service Dial Number
This service is provided by your network operator. For
more information regarding the corresponding
function, please contact your network operator.
SOS Number
This SOS number will call the emergency services
number in your country. In most cases, you can call
this number even if you have not yet inserted a SIM
card or entered your PIN.
Depending on your network operator, you may be able
to dial the emergency number even without inserting
the SIM card.
Phone Book
Settings
Memory Status
Displays the total number of contacts you have stored
in each phonebook and the total memory used.
Preferred Storage
Allows you to set the default phonebook in which you
save your contacts.
Fields
Allows you to select the items such as Home Number,
Company Name, Email Address, Office Number, Fax
Number, Birthday, Associate Picture/Sound and Caller
Group to be displayed in the Smart Phonebook.
My vcard
Allows you to edit or send your personal details.
Caller Picture
Allows you to assign a picture from the picture folder
in File Manager menu as the caller picture.
Caller Ring Tone
Allows you to assign a ring tone saved in the mobile
phone or delivered to you and saved in the User
Profiles menu as the caller ring tone.
19
5. Messaging
Insert Object
Format Text
Messages
This menu allows you to send and receive text or
multimedia messages, as well as manage the messages
you have sent and received. In idle mode, press L to
access the main menu. Then Select Messaging and
press L OK to create, edit and send your messages.
Write Message
When writing messages, you can toggle between T9
input, multitap and numeric by pressing #.
SMS
SMS enables you to send text messages to the other
party, using Short Messaging Service (SMS). You can
use the SMS menu to send messages to another
handphone or a device that is capable of receiving
SMS. To compose and send an SMS, follow the steps
below:
1. Select Write Message, enter your text and press
L to access the following options:
Done
Send the message.
Use Template Insert a preset message.
20
Insert picture, animation and sound
to your message.
Set Text Style, Text Size (for English
text, numbers and symbols only),
text Alignment and the alignment of
New Paragraph.
This feature only works if the settings
are put in before the text is entered.
Insert PHB
Insert a number from the phone
Number
book list.
Insert PHB
Insert a name from the phone book
Name
list.
Insert PHB
Insert a bookmark from the list.
Bookmark
Input Method Select the input method.
2. Select Done, then press L to access the next
option:
Send Only
Send the message to one recipient.
Save and Send Save the message to Outbox and
send the message.
Save to Drafts Save the message as a draft so that
you can edit, complete and send
later on.
Messaging
Send To Many Send the message to multiple recipients.
Send By Group Send the message to all the contacts
in a caller group.
3. Enter the phone number.
Press L, enter the phone number or select a contact
and press L.
When you send a message via the SMS network, your
phone may display “Sent”. This means the message has
been sent to the SMS center which you have set in your
SIM card. However, this does not imply that the
message has been sent to its destination.
MMS
Your mobile phone can also send and receive MMS
(Multimedia Messaging Service) messages. With
MMS, you can send messages that contain pictures,
sound and text.
When sending MMS messages, your recipient must
also have an MMS-enabled phone in order to view
your messages. Follow the steps described below to
compose and send an MMS:
Messaging
1. Select Write Message and enter the following:
To
Set the number or E-mail of the
recipient.
Cc
Set the number or E-mail of other
recipients you wish to send a copy of
the message to.
Bcc
Set the number or E-mail of the
recipients you wish to send a copy of
the message to, by which the
recipients in the Bcc list will be
invisible to other recipients.
Subject
Set the subject of the MMS.
Edit content
Edit the MMS content.
2. Press R to access the following options when
you have finished editing:
Done
Send the MMS.
Input Method Select the input method.
Add Image
Open the picture list to select and
insert a picture to your MMS.
Add Audio
Open the audio list to select and
insert a sound file to your MMS.
Add Video
Open the video list to select and
insert a video clip to your MMS.
21
Add
Attachment
Add Slide
Before
Insert a file (txt, jar etc) to your
message.
Only available when your MMS has
more than 1 slide. Insert a slide
before another slide.
Add Slide After Only available when your MMS has
more than 1 slide. Insert a slide after
another slide.
Add Bookmark Add a subject for your bookmark.
Text
Preview
Preview the current MMS.
Slide Timing
Set play time of the MMS slides.
The default value is 3 seconds.
3. Select Done, then press L to access the next
option:
Send Only
Send the MMS only.
Save and Send Save and Send the MMS.
Save to Drafts Save the MMS to Drafts.
Send Options
Set Validity period, Delivery report,
Read report, Priority.
Exit
Exit
22
Inbox
This menu allows you to read the SMS/MMS
messages which you have received. The messages are
displayed in a list.
When a message is displayed, press L or , to read it,
then press L Options to access the following options:
Reply
Reply to the sender.
Forward
Forward the selected message.
Edit
Edit the selected message.
Delete
Delete the selected message.
Delete all
Delete all the messages in the Inbox.
Use
Number
Extract and save the number of the
sender or the number displayed in the
message to the SIM card or phone, or
dial the number.
Use URL
Extract the URL displayed in the
message to connect the website.
Messaging
Advanced
Copy to phone/SIM: Copy the selected
message stored in SIM/phone to
phone/SIM.
Move to phone/SIM: Move the selected
message stored in SIM/phone to
phone/SIM.
Copy all text messages: Copy all
message stored in SIM/phone to
phone/SIM.
Move all text messages: Move all
message stored in SIM/phone to
phone/SIM.
Use
Number
Extract and save the number of the
sender or the number displayed in the
message to the SIM card or phone, or
dial the number.
Use URL
Extract the URL displayed in the
message to connect the website.
Advanced
Copy to phone/SIM: Copy the selected
message stored in SIM/phone to
phone/SIM.
Move to phone/SIM: Move the selected
message stored in SIM/phone to
phone/SIM.
Copy all text messages: Copy all
message stored in SIM/phone to
phone/SIM.
Move all text messages: Move all
message stored in SIM/phone to
phone/SIM.
Outbox
If you select Save and Send or Save before you send a
message, the messages will be stored in the Outbox.
When a message is displayed, press L or , to read it,
then press L Options to access the following options:
Send
Send the selected SMS.
Edit
Edit the selected SMS.
Sent
Delete
Delete the selected SMS.
Delete All
Delete all the SMS in the Draft box.
When you send a message, the messages will be stored
in Sent.
When you are in the Sent message list, press L or ,
to read it, then press L Options to access the
following options:
Messaging
23
Forward
Edit
Delete
Delete all
Use number
Use URL
Advanced
24
Forward the selected message.
Edit the selected message.
Delete the selected message.
Delete all the messages in the Sent
box.
Extract and save the number of the
sender or the number displayed in
the message to the SIM card or
phone, or dial the number.
Extract the URL displayed in the
message to connect the website.
Copy to phone/SIM: Copy the
selected message stored in SIM/
phone to phone/SIM.
Move to phone/SIM: Move the
selected message stored in SIM/
phone to phone/SIM.
Copy all text messages: Copy all
message stored in SIM/phone to
phone/SIM.
Move all text messages: Move all
message stored in SIM/phone to
phone/SIM.
Drafts
If you select Save to Draft after you have created your
MMS, the MMS will be stored in the Drafts box.
Press L or , to read it , then press L options to carry
out the following operations:
Send
Send the selected messages.
Edit
Edit the selected messages.
Delete
Delete the selected messages.
Delete All
Delete all the messages in the Draft box.
Use
number
Extract and save the number of the
sender or the number displayed in the
message to the SIM card or phone, or
dial the number.
Use URL
Extract the URL displayed in the
message to connect the website.
Advanced
Copy to phone/SIM: Copy the selected
message stored in SIM/phone to
phone/SIM.
Move to phone/SIM: Move the selected
message stored in SIM/phone to
phone/SIM.
Messaging
Copy all text
message stored
phone/SIM.
Move all text
message stored
phone/SIM.
messages: Copy all
in SIM/phone to
Edit
Edit the selected preset message.
Erase
Delete the selected preset message.
messages: Move all
in SIM/phone to
Write Message Create a new message.
When you select Multimedia Message, you can press
L to access the following options:
View
View the template.
If you have not set the message recipient in the draft
box, then Send option will not be available in the
options menu.
If the message in the Drafts box has no subject and
content, you can view the message status in Properties
and Use Details options.
Delete Folder
This menu allows you to delete all the messages in Inbox,
Outbox, Sent box, Drafts box and All folders where the
messages are saved.
Template
This menu allows you to preset up to 10 SMS and 5
MMS messages that you use most frequently. When
you select Text Message, you can press L to access the
following options:
Messaging
Write Message
Edit the template.
Properties
View the from, subject and size of
the MMS.
Message Settings
This menu allows you to configure the SMS/MMS
settings. Select Text Message or Multimedia Message.
When you select Text Message you can access options
include:
Profile Settings
Select a profile and access the following options:
Profile Name
Edit the name of the current
profile.
SC Address
Select your default SMS centre. If
not available on your SIM card, you
must enter your SMS centre
number.
25
Valid Period
Select the length of time your
messages will be stored in the SMS
centre. This is useful when the
recipient is not connected to the
network (and thus cannot receive
your message immediately).
This feature
dependent.
Message Type
is
subscription
Select the format of your sent
messages. This option is network
dependent.
Common Settings
Delivery Report When On, this option will notify
you via SMS whether your recipient
has received your SMS. This feature
is subscription dependent.
Reply Path
26
When On, this option allows you
to transmit the number of your
SMS message center together with
the message. The recipient can
then reply using your SMS center
and not theirs. This speeds up the
rate of transmission. This feature
is subscription dependent.
Memory Status
This option can display the memory status of the
messages saved in the SIM card and the phone.
Preferred Storage
You can choose to save your messages to Phone or SIM.
Preferred Bearer
This option allows you to set the preferred
transmission mode. You can select Preferred GPRS,
Preferred GSM or GSM Only. For further details, please
contact your network operator.
When you select Multimedia Message carry out the
following configurations for sending or receiving
MMS:
Compose
Set Creation Mode, Image Resizing
and Auto Signature.
Send
Set Validity period, Delivery Report,
Read Report, Priority, Slide Timing
and Delivery time options for
sending an MMS.
Retrieve
Set Home network, Roaming, Read
Report and Delivery Report options
for receiving an MMS.
Messaging
Filter
Set Anonymous, Max Size (KB) and
Advertisement from whom you want
to filter MMS or email messages.
Server Profile
Set network configuration. Please
contact your network provider for
more information.
Memory Status View the memory status of your MMS.
E-mail
If not included in your mobile phone contract, you
will need to subscribe to an e-mail service in order to
send and receive e-mails. In this case, all parameters
are communicated to you by your operator.
This menu allows you to send e-mails to one or several
recipients at a time, including with an attachment
such as a JPEG picture. Once received, your messages
can be forwarded and the attachments visualised with
the appropriate software.
Create an e-mail account
Before you start using E-mail function, the phone will
ask you to set Sender’s e-mail address in E-mail profile.
To create a new account, select E-mail > E-mail profile.
Select a profile and press L to access the option
menu. Select Edit and enter the account properties in
Messaging
Profile Settings, Outgoing Server, Incoming Server and
Signature correctly. You can set up to three email
accounts, one in each profile.
Send and Receive e-mail
To send an e-email, select Options > Send. This might
bring up a message requesting airtime. Select Yes to
continue and send the e-email. To receive new eemails, select Options > Receive mail. This might bring
up a message requesting airtime. Select Yes to
continue and receive new e-emails.
Write e-mail
To write an e-email, select E-mail > Write E-mail.
Enter the address (To), a copy (Cc), Subject and
Attachment (up to 3 files), and the e-mail content.
When you have finished writing your e-mail, press L
to access the option menu. You can then select to
Send, Send and Save, Save to Draft or Quit without
Saving.
If you exit the Messaging > Write E-mail menu before
sending your e-mail or if you cancel the sending while
it takes place, the e-mail content is deleted without
being stored.
27
You can only attach one file (JPEG, MID, JAR, TXT,
MP3) or one sound at a time. If you accept an incoming
call while writing an e-mail, the menu is closed and the
phone goes back to idle mode when you hang up.
Delete
Inbox
This menu allows you to connect to your mailbox and
download the e-mail headers (sender and subject
lines) from the server. You may then select an e-mail
header and press , to access the following options:
Reply without
content
Reply to the sender without the
email history.
Reply all
Reply to all senders with the email
history.
Reply all
without
content
Reply to all senders without the
email history.
Forward
Forward the downloaded e-mail to
someone else. Proceed as described in
“Inbox” on page 28.
28
Mark the e-mail to be deleted (select
this option again to unmark it).
When you exit the E-mail menu, you
will be asked to confirm deletion of
the selected item(s) from the e-mail
server.
Unsent
This menu allows you to list the e-email that were
saved before sending or were not sent successfully.
Select an e-mail from the Unsent box and press L
Options to: Edit and Delete.
Sent
This menu allows you to list the e-mail that were sent
successfully and which you have chosen to save before
sending.
Select an e-mail from the Sent box and press L Options
to: View and Delete. If you select View, the subsequent
procedures would be similar to the Inbox operations.
Drafts
This menu allows you to list the e-mail that were
created and saved but were not sent, and e-mail which
were automatically saved before you were able to save
or send them when you exit from the e-mail editor.
Messaging
Select an e-mail from the Draft box and press L
Options to: View, Edit, Delete, Delete all. If you select View,
the subsequent procedures would be similar to the
Inbox operations.
Delete All Folders
This menu allows you to delete all the messages in Inbox,
Unsent, Sent, Drafts and all storage locations where the emails are saved.
E-Mail Profile
This menu allows you to Activate, or Edit one of the
available email profiles. Your mobile phone may have
been pre-configured. To change the settings, choose
an Email profile in the list and select Edit to access the
settings decribed below.
If one of the accounts has been pre-configured, it may
be locked, in which case it cannot be renamed.
Instant Messages
This menu allows you to chat with your contact via
SMS. Before you start using instant messages
function, you need to set up an acount by selecting
Instant messages > Profile. Select a profile and press L
to access the option menu. Select Edit and enter the
account properties in Profile Settings and Connect
Messaging
Settings correctly. You can set up to 3 instant
messaging accounts, one in each profile. After you
have set up the account successfully, you can Login to
the account, enter the message, then send the message
to start chatting with your contact.
This feature is subscription dependent.
Voice Mail Server
This menu allows you to set your voice mail server
number, as well as retrieve your voice mails. When
you receive a voice mail, your network operator will
send a notification to your phone.
You can enter two sets of voice mail server numbers
which are supplied by your network operator.
Select a voice mail box and press L to access the
following options:
Edit
Edit voice mail server number.
Connect to Voice Retrieve your voice mail.
You can quickly access your voice mail server by long
pressing 1 key in idle mode.
29
Broadcast Messages
Broadcast messages are public messages broadcasted to
a group of mobile users. The messages are broadcasted
on coded channels. Generally, one broadcast channel
can transmit one type of message. Please contact your
network operator for a list of channel numbers and
their respective broadcast information.
Receive Mode
This menu allows you to set the reception of broadcast
messages. When On, you can receive broadcast messages.
When Off, you cannot receive broadcast messages.
Read Message
This menu allows you to read broadcast messages after
you have activated receive mode.
Languages
This menu allows you to set the language of the
broadcast messages that can
be received.
Channel Settings
Press L to access channel settings. You can Select,
Add, Edit or Delete channels.
30
Messaging
6. Call History
Your mobile phone can provide you with a list of
outgoing and incoming calls, attempts at auto redialling, as well as call details. The different types of
calls (Dialed Calls, Missed Calls and Received Calls) are
represented by different icons. They are displayed in
chronological order with the most recent call on top.
If the correspondent is stored in your phonebook, the
corresponding name is displayed.
Missed Calls
This menu allows you to view the recent unanswered
calls. You can view the date, time and the number of
times you have missed in each call.
Select an item and press L to view the date, time and
number. Press L Options to access the following
options:
Delete
Delete the number.
Save to Phone book Save the number.
Dial
Dial the number.
Call History
IP Dial
Send SMS
Send MMS
Edit
If the IP number has been set,
select IP Dial will automatically
add the IP number before the
number and dial it.
Send an SMS to the missed
number.
Send an MMS to the missed
number.
Edit the missed number.
Dialed Calls
This menu allows you to view the recent dialled calls,
including dialling attempts or calls that were successfully
connected.
Received Calls
This menu allows you to view the recent calls received.
Delete Call Log
This menu allows you to delete Missed Calls, Dialed
Calls, Received Calls or Delete All.
31
Call Time
Price Per Unit
This menu allows you to view Last Call Time, Total
Sent and Total Received (displayed in hours, minutes,
seconds). You can select Reset All Time to reset all the
call timers.
Allows you to set the unit price for the call cost. This
unit price shall be used for calculating the cost of your
calls (PIN2 code is required).
SMS Counter
Depending on your network, rounding-off for billing
purposes, taxes etc, the actual time invoiced for calls
and services by your service provider may vary.
Displays the number of messages that have been sent
and received.
Call Cost (Network dependent)
Last Call Cost
Displays the cost of the last call.
GPRS Counter
Tabulates the amount of data sent and received via
GPRS. You can also reset the counter. The unit of
measurement is Byte.
Total Cost
Displays the total cost of all calls since the cost counter
was last reset. If the total cost exceeds the maximum
cost set in the Max Cost option, you will not be able
to make any more calls until you reset the counter.
Reset Cost
Allows you to reset the cost counter. You need to enter
your PIN2 code and confirm.
Max Cost
Allows you to set the maximum cost of your calls
(PIN2 code is required).
32
Call History
7. Settings
Power On/Off Select whether to power on or off
your phone at the specified time.
Time
This menu allows you to change the settings associated
with each available option in your phone (time and
date, security, call divert, etc.).
Phone Setup
Time and Date
Allows you to set the time and date with the keypad
or navigation keys. You can set the following:
Set Home City Select the city you are currently situated.
Enter the time with the keypad.
Language
This menu allows you to select a language for all the
menu texts. Press + or - to browse the list of languages
and press L to select.
Preferred Input Methods
This menu allows you to set the default input method.
Display Characteristics
Wallpaper
Set the background image of the main
screen displayed in idle mode: Choose
System to select a predefined image or
choose User Define to select a
downloaded image.
Schedule Power On/Off
Screen Saver
This menu allows you to set the time to power on or
off your phone automatically. Select an item and press
L to access the following options:
Status
You can select Enable (Activate the
setting) or Disable (Deactivate the
setting).
Select Settings to set the status and
waiting time of the screen saver. Enter
Select to choose System or User Define.
The operation of this function is
similar to Wallpaper.
Show Date
and Time
Set whether or not to display the date
and time in idle mode by turning this
option On or Off.
Set Time/Date Enter the time/date with the keypad
or navigation keys.
Set Format
Settings
Set Time Format and Date Format.
33
Show
Owner
Number
Show
Operator
Name
If you have set the name and number
in Phone Book > Extra Number >
Owner Number menu, then the name
will be displayed in idle mode. (Note:
When the wallpaper is set as Analog
Clock and Digital Clock, show owner
number will not be displayed). You
can turn this option On or Off.
Set whether or not to display the
network operator’s name by turning
this option On or Off.
Auto Keypad Lock
This menu allows you to lock your keypad
automatically. The default setting is Off.
Select the time interval after which the keypad will be
locked and press L to confirm.
Greeting Text
Dedicated keys
In idle mode, you can quickly access certain preset
functions by pressing the navigation keys. This menu
allows you to modify the preset functions according to
your needs.
Shortcuts
This menu allows you to quickly enter the 10 preset
menu items. You can also modify the preset menu
items according to your needs.
To access the shortcuts menu, press < in idle mode.
Press L Options to access the following options:
Add
To add a new shortcut.
Edit
To edit an existing shortcut.
Delete
To delete an existing shortcut.
Delete All
To delete all the shortcuts.
Disable
To disable the shortcut. You can press
this option a second time to enable the
shortcut.
Change
Order
To change the order of the shortcuts. For
example, you can change the first shortcut
to become the third shortcut in the list.
Turn On or Off, and edit the greeting text of the phone.
Speed Dial
This menu allows you to quickly dial the number
stored in your phonebook. You can set a maximum of
8 speed dial numbers, so that a long press on the
numeric key will dial the number associated with that
numeric key. You need to set Enable Speed Dial and
Set Number.
34
Settings
Auto Update of Date and Time
Set whether or not to update the date and time
automatically by turning this option On or Off.
LCD Backlight
This menu allows you to set the time of the LCD
Backlight to: 10 Seconds, 15 Seconds, 30 Seconds and
1 min.
Dual SIM
Swap SIM
This menu allows you to switch one SIM into
another.
Default SIM Slot
This menu allows you to select the default SIM slot.
Switch on Roaming
This menu allows you to set your roaming status. You
can select Off (roaming disabled) or Ask when roaming
(select to switch another SIM card when you are
roaming).
Set Slot Name
This menu allows you to set the names of the card
slots. You can select to set the Status On or Off. To
edit the slot names, You can highlight one of the slots
and press L to do the editing.
Settings
Call Setup
Caller ID
Depending on your network, you may choose to show
or hide your identity from your correspondent by
selecting Set By Network, Hide ID or Send ID.
Call Waiting
This option allows you to Activate or Deactivate call
waiting. When this option is active, you will hear a
beep tone when someone tries to call you while you
are already on the phone. If this option is inactive,
your phone will not emit any alert and the caller will
hear a busy tone. If you have activated Divert If Busy
option, the call will be diverted to another phone.
Select Query Status to check the status of the call
waiting option.
Call Divert
To divert incoming calls to your voice mailbox or to
another phone number (regardless of whether or not
the number is in your phonebook).
Divert All
Divert all incoming calls. If you select
Voice Calls
this option, you will not receive any
calls until you deactivate it.
Divert If
Unreachable
Divert when your phone is switched
off or out of the service area.
35
Divert If No
Answer
Divert when you did not answer the
call.
Divert If Busy
Divert when you are already on the
phone.
This feature is network dependent and requires a
specific call barring password supplied by your service
provider.
Line Switching
Divert All Data Divert all data calls.
Calls
This menu allows you to switch between 2 calls.
Cancel All
Cancel all call divert options.
Divert
Select Activate and enter the number to forward your
calls to. Select Query Status to check the status of the
corresponding call divert options.
Before diverting your calls to your voice mailbox, you
must enter your voice mailbox number. This feature
is subscription dependent.
This menu allows you to set whether or not the phone
will emit a beep tone after a certain call duration. You
can select Off (does not emit a beep tone), Single
(select a value from 1 to 3000 seconds, which is the
duration after which the phone will emit a beep tone)
or Periodic (select a value from 30 to 60 seconds,
which is the periodic time after which the phone will
emit a beep tone. The phone will emit a beep tone
after each periodic time during a call).
Call Barring
Allows you to limit the use of your phone to specific
calls. This can be applied to Outgoing Calls (All Calls,
International Calls or International Except Home) and/
or to Incoming Calls (All Calls or When Roaming). In
both cases, Cancel All option applies to all calls at once.
Change Barring PW allows you to change the call
barring password. Query Status allows you to check
whether or not a particular type of call has been
barred.
36
Call Time Reminder
Call Time Display
This menu allows you to set whether or not to display
the call time during a call.
Auto Redial
If the call you have dialled is not answered, your
phone will automatically redial this number at
intervals. Press ) or R to cancel auto redial.
Settings
Closed User Group
This menu is a network dependent service which
allows you to define a group of users within which
outgoing and incoming call restrictions can be made
by the network (for example only calls to numbers
within the group are possible). The same group of
users is then permitted to communicate with each
other but not with users outside the group. Select
Closed User Group and press L OK, then you can
press L Options to Edit, Add, Activate, Deactivate,
Delete the user group.
IP Number
This menu allows you to store 3 groups of IP number
so that you need not enter the number before you
make an IP call. Press L Option to Activate or Edit the
IP Number.
The IP number has to be supported by your network
operator before you can make an IP call. When you
change a new SIM card, the IP number you have
stored will be cleared. The phone does not validate the
IP number you have entered. Therefore, please ensure
that the numbers are correct.
Black list
This menu displays the list of contacts whose calls will
be rejected. You can select to set the Black List Status.
Settings
To add the corresponding number to the list, select
and enter the Black List Number then confirm by
saving it.
You cannot add a name to the blacklist directly from
the Phonebook, the Calls list and the SMS Inbox.
Security Setup
PIN Code
This menu allows you to set the PIN code On or Off.
The default setting is Off. If set to On, you have to
enter your PIN code when switching your phone on.
If the enter the wrong PIN code, you will not be able
to use most of the features in this phone. Press , to
activate. Make sure that you have entered the correct
PIN code before you can enable this feature.
Phone Lock
This menu allows you to set a password for your
phone. The default setting is Off. Once you have set
Phone Lock, you must enter the password each time
you switch on your phone.
Enter the password and press L. If Phone Lock is
currently Off, the status will change to On and vice-versa.
The default phone lock code is 0000.
37
Fixed Dial
This menu allows you to restrict your outgoing calls.
You need to enter PIN2 code, which has to be
supplied / supported by your network operator.
Mode
There are two modes: On (you only dial the
numbers stored in the Fixed Dial List) and
Off (you can dial any number).
Fixed Dial Displays the fixed dial list. Press L Add,
List
enter the name and phone number, then
press L, enter PIN2 code and press L.
Not all SIM cards support PIN2 code. If your SIM card
does not have a PIN2 code, this option is not available.
Barred Dial
This menu allows you to restrict different types of
outgoing calls.You can activate or deactivate this
feature if your SIM card supports it.
Change Password
This menu allows you to change the PIN code, PIN2
code and Phone Lock Password.
PIN
It is supplied together with the SIM card. The default
PIN code is supplied by your network operator.
38
If you enter an incorrect PIN code three times in
succession, the PIN code of your SIM card will be
locked automatically and you will be prompted to
enter the PUK code to unlock it. You can obtain the
PUK code from your network operator. If you enter an
incorrect PUK code ten times in succession, the SIM
card will be locked permanently. When this happens,
please contact your network operator or retailer.
PIN2
It is used to access certain network functions such as
call charges or fixed dial, etc. If you enter an incorrect
PIN2 code three times in succession, the PIN2 code
of your SIM card will be locked. To unlock PIN2
code, you need to obtain the PUK2 code from your
network operator. If you enter an incorrect PUK2
code ten times in succession, the SIM card will be
locked permanently. When this happens, contact
your network operator or retailer.
Phone Lock Password
It protects your phone against unauthorized use by
other parties. To protect your data, you need to enter
the phone lock password before you restore factory
settings. The default phone lock password is 0000.
Settings
Sound Effects
Equalizer
This menu allows you to set the audio frequency when
playing music.
Restore Factory Settings
This menu allows you to reset some settings in your
phone to its factory settings.
Enter the phone lock password and press L to confirm.
Once you have entered the correct password (same as
your Phone Lock Password, default value is 0000),
your phone will be restored to its factory settings.
Settings
39
8. Multimedia
Your phone features a built-in digital camera. You can
take pictures, store them in your phone or transfer
them to your PC via a data cable, use them as
wallpaper or send them to your friends via MMS.
Activate the camera
You can go to the Camera by selecting Multimedia >
Camera.
The following table describes the operations of the
various keys in camera mode.
+ / - Zoom in / out
</>
Increase / decrease exposure compensation
,
Take a picture
)
Exit Camera mode and return to idle mode.
L
Access Options menu
R
Return to previous screen
1
Effect Settings
2
Set White Balance
4
Set Delay Timer.
40
5
Activate / deactivate Continous shot.
6
Set Scene Mode.
7
Set Image Quality.
8
Set Image Size.
Take a picture
1.
2.
Frame your picture and press , to take the
picture.
Once the picture is taken, the image will be
displayed. Press L to save the picture or press
R to clear the picture.
Options menu of the Camera
This section describes the Options menu of the
Camera.
Album
Access ImageViewer.
Camera
Settings
Set Shutter Sound, EV, Banding,
Delay Timer, and Cont Shot.
Image Settings Set Image Size (220 x 176, 320x240,
648x480
1280x1024
or
1600x1200) and Image Quality
(Normal, High or Low).
Multimedia
White Balance Select the appropriate White Balance
for different locations: Auto, Daylight,
Tungsten, Fluorescent, Cloud or
Incandescence.
Scene Mode
Set the browse style as List Style or
Matrix Style.
Forward
Apply the selected picture to other
options such as To Wallpaper, To
Screen Saver, To Phonebook, To
MMS, To E-mail and To Bluetooth.
Rename
Rename the selected picture.
Delete
Delete the selected picture.
Set the Scene mode to Auto or Night.
Effect Settings Set special effects for the picture.
Add Frame
Browse Style
Add a frame to the picture. Some
frames are available only to certain
picture sizes.
Storage
Set the storage location to Phone or
Memory card.
Restore
Default
Reset the camera settings to their
default values.
Delete All Files Delete all pictures.
Sort
Sort all pictures according to name,
type, time or size.
Storage
Set the storage location to Phone or
Memory card.
ImageViewer
Video Player
When you take a picture and save it, the picture is
stored in the ImageViewer folder. When you access the
menu, your photos will be displayed as thumbnails.
Use + and - navigation keys to browse through the list.
Press L Options to access the following options:
View
Display the picture.
This option allows you to view the videos you have
recorded or pre-installed in your phone.
Select a video and press L Options to access the
following options:
Play
Play the selected video.
Image Info
Multimedia
Display the detailed info of the
selected picture.
Forward
Apply the selected video to other
options such as To MMS, To E-mail
and To Bluetooth.
41
Rename
Delete
Rename the selected video.
+/-
Zoom in / out
Delete the selected video.
</>
Increase / decrease exposure compensation
Delete All Files Delete all videos.
,
Start / Pause recording
Sort
Sort all videos according to name,
type, time or size.
)
Exit video recording mode and return to
idle mode
Storage
Set the storage location to Phone or
Memory card.
L
Access Options menu
R
Return to previous screen
When the movie is playing, you can adjust the speed by
pressing the +/- key. Press * key to play the movie in
full screen/landscape mode.
1
Effect Settings
2
Set White Balance
4
Set Night Mode
Video Recorder
This menu allows you to record videos in 3GP format.
Activate Video Recorder
Select Video Recorder and press L to activate it.
The following table describes the operations of the
various keys in video recording mode.
42
Record a video
Frame your image and press , to start recording.
While recording, you can press , Pause/Resume. Press
R to stop the recording and save the video.
Option menu of the Video Recorder
This section describes the Options menu of the Video
Recorder:
To Player
Access Video Player.
CamCorder
Set White Balance, EV, Night Mode
Settings
and Banding.
Multimedia
Video Settings
Set Video Quality, File Size Limit, Rec
Time Limit, Record Audio and
Encode Format.
Effect Settings Set special effects for the video.
Storage
Set the storage location to Phone or
Memory card.
Restore Default Reset the video recorder settings to
their default values.
When you have finished the picture editing, press L
to access the following options:
Save As
Save the picture to a new file.
Add Effect
Apply the effect provided by the phone.
Add Frame
Add a frame provided by the phone to
the picture. You can use the same
frame repeatedly for the picture.
Add Icon
Add an icon provided by the phone to
the picture. Use the navigation keys to
move the selected icon. Then press ,
and L Done.
Add Text
Use the navigation keys to move to the
location where the text will be added.
Press , and press L Done.
Adjustment
Adjust the image and colour of the
picture.
Flip
Use the navigation keys to flip the picture.
Expand
Canvas
Adjust the size of the picture if it is not
displayed in full screen (i.e. 176 x 220).
Help
Obtain information on Add Effect, Add
Frame, Add Icon and Add Text.
Photo Editor
This menu will link you to the File manager which
allows you to manage the pictures in Images and
Photos folders in your phone. Select Photo Artist and
select Phone under File manager. Then select a picture
in Images or Photos folders and press L to access the
following functions:
Auto Resize Resize the selected picture automatically
to fit the screen size (i.e. 176x220).
Main LCD
Clip
Multimedia
Resize the selected picture manually.
Press the navigation keys to select the
area that needs to be clipped. Press *
to enlarge and press # to reduce the
clipped area.
43
9. Fun & Games
Java network
Allows you to choose your preferred
network.
Heap Size
Displays the maximum allowed size
for Java memory.
Java
Your mobile phone features a Java run-time
environment, which allows you to run Java
applications, such as games downloaded on the
network.
The first time you launch Java, a message appears to
alert you that the installation and configuration of
Java will take several moments. This is a one-time
occurrence.
This phone only supports Java games downloaded
from the network provider based on this handset
model.
Java Settings
Once Java has been installed, you may then proceed to
set the following:
Java Audio
Allows you to set the volume level.
Java Default Security
Allows you to set the automatic launch preference of
Java.
Untrusted domain
Network
Access
Allows you to set the automatic
connection preference. You can
select Prompt always, Prompt at first,
Prompt once, or Never.
Auto Invocation Allows you to set the preference of
starting a Midlet automatically. You
can select Prompt always, Prompt at
first, Prompt once, or Never.
Your mobile phone may display
messages about "MIDlets". MIDlets
are JAVA applications or games.
Java Vibration Allows you to set the automatic
launch of Java On or Off.
44
Fun & Games
Messaging
Multimedia
Allows you to set the preference of
receiving messages. You can select
Prompt always, Prompt at first,
Prompt once, or Never.
Allows you to set the preference of
multimedia messages. You can
select Prompt always, Prompt at first,
Prompt once, or Never.
Read user data Allows you to set the preference of
Read user data. You can select
Prompt always, Prompt at first,
Prompt once, or Never.
Games
Select a game and press L. For details regarding a
certain game, please refer to the onscreen instructions.
Game Settings
This menu allows you to turn the audio and vibration
effect of the games on or off.
Select BGM (Background music), Sound Effects or
Game Vibration, then press the </> to select On or Off
and press L to confirm.
Write user data Allows you to set the preference of
Write user data. You can select
Prompt always, Prompt at first,
Prompt once, or Never.
Restore Settings
Allows you to restore the Java application to its default
settings.
Fun & Games
45
10. User Profiles
This menu allows you to set the ring tone, alert type,
ring volume, answer mode and backlight, etc when
you receive an incoming call or a new message so that
you can adapt the use of your phone to different types
of call environments.
Select General, Meeting, Outdoor, Indoor, Headset or
Bluetooth and Flight Mode and press L OK to access
the following options:
Activate
Activate the selected profile.
Customize
46
The “Auto” option in Answer Mode is available only
when the phone is in Headset Mode. Headset mode
need not be activated. The phone will switch to
headset mode automatically when you plug the headset
into your phone.
Flight Mode
This menu allows you to set your menu to Normal
Mode or Flight Mode. You can also select Query When
Power On so that you will be asked which mode you
prefer when the phone is powered on. If Flight Mode
is activated, network function will be closed and all
related network operations will be prohibited.
Allows you to set the selected mode
including Tone Setup (Incoming Call,
Alarm, Power On, Message Tone and
Keypad Tone), Volume (Ring Tone
and Key Tone), Alert Type (Ring,
Vibration Only, Vibra and Ring or
Vibra Then Ring), Ring Type (Single,
Repeat or Ascending), Extra Tone
(Warning, Error, Camp on and
Connect), Answer Mode (Any Key).
User Profiles
11. Business
This menu contains features and options that are
designed to help you get organized and be kept
informed at all times.
Calendar
This menu allows you to view the calendar, and add
tasks in the To Do List.
You can press the navigation keys to view the
calendar.
Select a date that you wish to view and press L
Options to access the following options:
View Tasks
Allows you to set date, time, notes
and alarm for the task. Press L to
add new tasks, or edit and view
existing task (for details, please refer
to “To Do List”).
Jump To Date Allows you to view a specific day
quickly. Enter the date and press L.
When there is a scheduled task for a particular day,
the date will be highlighted in red.
Business
To Do List
This menu helps you manage the different types of
task in your daily work or life. You can add task
description, a specific timing and an alarm for your
To Do List.
If there is no task in your phone, the screen displays
Empty. You can press L Add to create a new task.
After you have edited the task, press R Done.
If you have selected an existing task, you can press L
Options to access the option menu.
Add a task
Date
Allows you to enter the date of the task.
Time
Allows you to enter the time of the task.
The time you enter must be in 24-hour
format.
Note
Allows you to enter task description. Press
L Edit, enter the description and press L
to save.
Alarm
Use the navigation keys to set alarm status.
Repeat
Set task frequency: Once, Every Day, Day,
Weekly or Monthly.
47
Option menu of an existing task
View
View the settings of the selected task.
Add
Add a new task.
Edit Task
Edit the selected task.
Delete Task
Delete the selected task.
Delete All
Delete all tasks in To Do List.
Send
vCalendar
Send the calender to the desired
recipient.
Alarm
Your mobile phone has a built-in alarm clock. You
can set a maximum of 3 separate alarms.
To set an alarm, follow the steps below:
1. Select an alarm and press L Edit.
2. Set the status to On.
3. Enter the time.
4. Select Repeat: Once, Everyday or Days. When
you have finished the settings, press R Done.
5. Set the Snooze mode: Default or from 1 to 10
minutes .
6. Select the Alert Type: Ring, Vibration Only or Vibra
and Ring.
48
If you select “Days” mode, you can select the week line,
then set the alarm clock for each day of the week
individually. You can switch between On and Off by
pressing the L.
World Clock
This menu allows you to check the time of the main
cities around the world.
Press the navigation keys to select the city. The local
date and time will be displayed at the bottom of the
screen.
Extras
This menu contains features and options designed to
help you keep you organized and informed while on
the move.
Calculator
Your phone has a built-in calculator which you can
use to perform basic calculations. Enter numbers
using the keypad and insert operators with the
navigation keys as indicated in the following table:
+
Add or M+
-
Subtract or M-
<
Multiply or MC
Business
>
Divide or MR
R
Clear number
*
Decimal point
,
Result
The result of the calculator is indicative only. The
calculation accuracy is 10 decimal places. The result is
then truncated after the 10th decimal digit for the
next operation.
Stopwatch
Your phone provides the stopwatch function. There
are two types of stopwatches available: Typical
Stopwatch and nWay Stopwatch. When you select
Typical Stopwatch, you can access the following
options:
Split Timing
Press L Start/Stop/Resume to start/
stop/resume counting and press R
Split to split the time. When you
select Split, the stopwatch still
counts continously.
Lap Timing
Press L Start/Stop/Resume to start/
stop/resume counting and press R
Lap to lap the time. When you press
R Lap, the stopwatch will count
from the beginning.
View record
View the saved record.
When you select nWay Stopwatch, you can press L
Start to record your time. There are four time displays
available. They are indicated by the +, -, < and >
navigation keys. The selected time will display in red
colour. To reset the stopwatch, long press L Resume.
Units Converter
This menu allows you to carry out unit conversion for
length and weight.
Press * key to enter decimal point.
Currency Converter
This menu allows you to convert a sum from one
currency into another using the exchange rate of your
choice. You can convert from Local to Foreign currency
or vice versa. Enter a rate in the Rate field, press L, and
enter an amount in either the Local or Foreign field,
then press L to obtain the conversion value.
Press * key to enter decimal point.
Business
49
E-Book Reader
This menu allows you to view the text file saved in the
phone or micro SD card (make sure that you have
already inserted the micro SD card into the card slot).
You need to copy and save the selected text file into a
ebook folder so that you can read the text when you
enter the eBook menu. If there are existing text files, a
text file list will display on the screen. Press L Options
to access the following options:
Open E-Book Open and read the selected file.
Storage
Set the storage location.
Apply Global
Settings
Activate the settings you have set in
Global Settings.
Help
Display the shortcut functions.
This function only supports text file saved in the folder
under the ebook menu with file size less than 2MB.
Global Settings Set the text format.
Book Info
Display the detailed info of the
selected file.
Delete
Delete the selected file.
Delete All Files Delete all files under eBook.
Sort
50
Select to sort the files By type, By
time, By size or None (no sorting or
random sorting).
Business
12. Services
Goto
Access the web page of the selected
bookmark.
Edit
Edit the selected bookmark.
This menu contains Wap and Data Accounts.
Send
Send the selected bookmark.
STK
Delete
Delete the selected bookmark.
The availability of the features in this menu depends
on whether or not your SIM card supports STK. If
your SIM card supports STK function, the STK
menu will be displayed on the screen.
Delete all
Delete all bookmarks
Add Bookmark Enter the title and URL to create a
new bookmark.
WAP
This option allows you to access the internet. Your
phone has been pre-configured with a number of
internet access modes. You can start browsing the
internet once you have activated an access mode.
Homepage
You can store a homepage for each access mode.
When you access the internet with the WAP browser,
the homepage of the access mode which you have
selected will be displayed first.
Bookmarks
You can save the URL as a bookmark in your phone.
Select a bookmark and press L Options to access the
following options:
Services
Recent pages
This menu allows you to view the websites which you
have visited recently.
Enter address
Enter a web address and confirm connection to the
website.
Settings
This menu allows you to configure web settings for
web browsing. Your phone may be preconfigured
with the settings parameter of a particular network
operator. If you are a subscriber of the network
operator, you may start using your browser.
Otherwise, you need to reconfigure the settings.
51
Philips is not liable to give prior notification nor shall
it bear any consequences for any failures arising from
changes of configuration made by you or by the
network operator. Please check with your network
operator for the most updated information.
The following options for Web settings are available:
Edit Profile
Make changes on the configuration
of the currently selected profile.
Browser
options
Allows you to configure the browser
parameters, such as set Timeout and
enable or disable Show images
function.
Service
Message
Settings
Allows you to activate or deactivate
the service message settings.
Clear Cache
You can enable, disable or clear
cache.
Clear Cookies
You can enable or disable Cookie,
and clear cookie. Cookie is an
information sent to your browser
when you visit a website.
Trusted
Certificates
Display the list of installed Trusted
Certificates.
52
Data Accounts
This menu allows you to set your account information.
The existing account information is supplied by the
manufacturer.
GSM Data
You can set: Account Name, Number, User Name,
Password, Line Type, Speed and DNS.
GPRS
You can set: Account Name, APN, User Name, Password,
Auth. Type.
Services
13. Audio Player
L
Access play List and press L again to
access Options menu.
R
Return to the previous screen.
Audio Player
Option menu of the Audio Player
This menu allows you to play music. The music
stored in the audio player folder will be automatically
detected and added to the play list. When the music is
playing, you can dial or answer an incoming call. The
player will pause once the connection is established.
Play
Play the selected music track.
Detail
Display detailed info of the music
track.
Activate Audio Player
Press R in idle mode or select Audio Player.
The following table describes the operations of the
various keys when playing music.
+
Play/Pause
-
Stop
<
Skip to the previous music track
>
Skip to the next music track
Volume side Adjust music volume
keys
)
Audio Player
Exit Audio Player and return to home
screen
Add To Rings Add the track to the My Music folder
to choose from when selecting a
ringtone in File Manager.
Add
Add the track to the selected folder
(this option is available only when List
Auto Gen is deactivated).
Refresh List
Update the play list in Audio Player.
Settings
Include Phone/Memory card, Play List,
List Auto Gen, Repeat (Repeat mode),
Shuffle (Play order), Background Play
(Whether or not to continue playing
when you exit from the audio player),
BT Stereo Output BT, Stereo Headset
and Equalizer.
53
To add or delete music tracks, you need to connect
your phone to the computer using the USB data cable.
After the computer has identified your phone, you can
then copy music tracks to your phone or delete music
tracks from your phone.
Note: Only those music tracks saved in the root
directory folder of the File Manager can be autogenerated by selecting the Refresh List option. To
retrieve tracks from the subfolders, you need to
deactivate List Auto Gen in the Settings option. Then
press L Options and select Add. The file manager will
open and you can then select the subfolder's content
you want to add in the audio player.
If you cannot listen to the music after you have
connected your phone with the bluetooth headset. You
can enter Audio Player and press L List, then press L
Options, select Settings, then select and activate BT
Stereo Output.
Sound Recorder
This menu allows you to record sound. You can also
play, rename and delete the sound you have recorded.
Select a recording and press L, or press L directly to
54
access Options menu.
Record
Press L to start recording, press L to
Pause or Cont. recording. To finish
recording, press R Stop. Enter a
filename for the recording and press L.
Play
Play the recording.
Append
Append sound to the recording.
Rename
Rename the recording.
Delete
Delete the recording.
Delete All
Delete all recordings.
Settings
Set the format of the recording.
Forward
Apply the recording to other options.
Melody Composer
This menu allows you to edit a melody and set it as
ring tone.
If there is no melody, you can press L Add to create a
melody and press L to access Options menu when
composing the melody. If you have selected an existing
melody, you can press L to access Options menu.
Audio Player
Key operations when composing a melody
0
Insert a rest.
Option menu of a melody
Play
Play the selected melody.
1-7
Enter Do-Si.
Edit
Edit the selected melody.
8
Insert vibra effect (vibrating note).
Add
Create a new melody.
9
Insert backlight effect.
Rename
Rename the selected melody.
+-
Change pitch of the note to high,
middle or low.
Delete
Delete the selected melody.
Switch the status of the note to high,
normal or low.
Delete All
Files
Delete all melodies.
#
Forward
*
Change the tempo.
Apply the melody to other options
such as To User Profile, To MMS and
To EMS.
Press the navigation keys to select vibra or back light,
and press + or - keys to turn the effect on or off.
Option menu when composing a melody
Play
Play the melody.
Play Speed
Select playback speed.
Select
Instrument
Select a musical instrument.
Save
Save the melody.
Audio Player
55
14 • Connectivity
My device
Select to connect to devices that
you predefined.
Active Device
Activate the selected device.
Your phone allows you to connect to a variety of
external devices via Bluetooth, USB, or Network.
This menu provides you with more features to set up
the connection with these external devices.
Settings
Allows you to set the following
options: Visibility, Change Device
Name, Authentication, Audio Path and
FTP Setting.
Bluetooth
About
Display the instruction to use
bluetooth.
Your phone supports Bluetooth wireless technology,
allowing connection to a compatible Bluetooth device
within 10 meters. The Bluetooth connection can be
subject to interference from obstructions such as walls
or other electronic devices.
Before you can apply Bluetooth, make sure the other
device supports Bluetooth function by contacting the
device’s manufacturer or its accompanied
documentation.
Bluetooth menu
Making a Bluetooth connection
To make a Bluetooth connection, first of all, make
sure you switch on the Bluetooth feature in the option
On/Off. Then select My devices.
Connection with an audio device
Choose <Inquiry Audio Device>. When the list of device
appears, select the one you want to make a connection
with it. As soon as you select a device and a connection
is made, you are prompted to enter a passkey in order
to pair with the device. This passkey is supplied by the
manufacturer of the other Bluetooth device, refer to
its documentation for further information. The
passkey feature ensures that only legitimate
connections are allowed to connect either to your
device or the selected device.
Options
Description
Power On/Off
Turn on/off the Bluetooth feature.
Inquiry Audio
Device
Search the
available.
56
devices
that
are
Connectivity
If you do not use the Bluetooth feature for some time, you
should deactivate it in order to conserve battery power.
Network Setup
Select
Network
Select a preferred network to be used
currently.
Selection
Mode
Automatic:
your
phone
will
automatically select and register to an
available network.
Manual: provides you with a list of
available network in the area. Select
the network you wish to register with
and press L to confirm.
recommended
to
This menu allows you to set the GPRS connection
mode. You can select Always or When Needed.
USB
This feature allows you to connect your phone to a PC
via USB cable. You can carry out the following
operations:
Mass Storage
Acts as a mass storage for your mobile
phone data on the computer and
recover the data saved in the
computer, upload and download files,
access the internal memory and micro
SD card (if present) and the size of
transfer is unlimited until your
memory is full.
Webcam
Acts as a webcam for your PC.
select
You can select a network other than your home network
only if it has a valid roaming agreement with your home
network. If you change the network, some problems may
arise during the operation of your phone.
Connectivity
This menu allows you to build a network list in order
of preference. Once defined, the phone will try to
register to the network according to your preference.
GPRS Connection
This menu allows you to select the service network
New Search Search the network available.
You are
Automatic.
Preferred Networks
57
COM port
Acts as a modem for your phone and
PC connnection. You can use the
software provided to edit your mobile
phone contacts, pictures and
melodies.
When the transfer is finished, please make sure that
you safely remove your device based on the instruction
of your computer.
Using Mobile Phone Tools
Mobile phone tools help you make the best use of
your mobile phone for data and document
transmission through the Mobile Phone Tools
software. With this software, you can upload and
download files, send and receive SMS and edit your
mobile phone contacts. To activate this feature, you
need to install and open the Mobile Phone Tools.
Then connect the phone via the USB cable. Enter
Connectivity menu and select Com port. On the
computer screen, select 9@9w and press Connect.
58
Connectivity
15. File Manager
This menu allows you to view the total memory and
free memory capacity in the phone and memory card.
It also allows you to manage the pictures, recorded
sound, ring tone and music files in your phone.
Press L Options to access the following:
Open
Open the folder. You can select a file
or folder to carry out the following
operations:
• Folder operations
Open, Create Folder, Rename, Delete
and Sort.
• File operations
Play (for music file), View (for image
file), Forward, Detail, Rename, Copy,
Edit, Move, Delete, Delete All Files and
Sort.
File Manager
Create Folder Create a new folder.
You can also organize your files into
subfolders. Select a folder under
which you want to create a subfolder.
Press L Edit and select Create Folder.
You can then store your files into the
subfolder.
Format
Format the folder. (Available for root
directory only).
The top right corner of the file manager screen displays
the storage memory utilized. When you select a folder
or file in file manager, the top right corner of the
screen will also display the date and size of the file/
folder.
59
Icons & symbols
In idle mode, several symbols can be displayed
simultaneously on the main screen.
If the network symbol is not displayed, the network is
currently not available. You may be in a bad reception
area; moving to a different location may help.
Silent - Your phone will not ring when
receiving a call.
Battery - The bars indicate the battery level
(4 bars=full, 1 bar=low).
GSM Network - your phone is connected to
the GSM network.
Reception quality - the more bars are shown
the better the reception is.
Keypad lock - The keypad has been locked.
Bluetooth - Feature is activated.
Alarm - The alarm clock has been activated.
Call forward - All your incoming voice calls
are being forwarded to a number.
Roaming - Displayed when your phone is
registered to a network other than your own
(especially when you’re abroad).
Home zone - A zone designated by your
network operator. Subscription dependent,
contact your service provider for details.
GPRS attach - Your phone is connected to the
GPRS network.
SMS/MMS message - You have received a
new SMS/MMS message.
SMS full - Memory for messages is full.
Delete old messages to receive new ones.
Headset - The headset is plugged into the
phone.
Recording - Sound recording mode is activated
during a call.
Ring - The phone will ring when there is an
incoming call.
Vibration only - The phone will vibrate when
there is an incoming call.
60
Icons & symbols
Precautions
Radio Waves
Your cellular mobile phone is a low power
radio transmitter and receiver. When it is
operating, it sends and receives radio waves.
The radio waves carry your voice or data
signal to a base station that is connected to the
telephone network. The network controls the power
at which the phone transmits.
• Your phone transmits/receives radio waves in the
GSM frequency (900 / 1800 / 1900 MHz).
• The GSM network controls transmission power
(0.01 to 2 watts).
• Your phone complies with all relevant safety
standards.
• The CE mark on your phone shows compliancy
with European electromagnetic compatibility (Ref.
89/336/EEC) and low voltage directives (Ref. 73/
23/EEC).
For body worn operation, this phone has been tested
and meets FCC RF exposure guidelines when used
with an accessory that contains no metal and that
positions the handset a minimum of 1.5cm from the
body. Use of other accessories may not ensure
compliance with FCC RF exposure guidelines.
Warning: This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two
conditions:
• This device may not cause harmful interference,
and
• This device must accept any interference received,
including interference that may cause undesired
operation.
Your cellular mobile phone is your responsibility. To
avoid damage to yourself, to others or to the phone itself,
read and follow all the safety instructions and make them
known to anyone borrowing your phone. Furthermore
to prevent unauthorised use of your phone:
Keep your phone in a safe place and keep it
out of small children's reach.
Avoid writing down your PIN code. Try to
remember it instead.
Switch off the phone and remove the battery if you are
going to leave it unused for a long time.
Change your PIN code after purchasing the phone
and to activate call restriction options.
The design of your phone complies with all
applicable laws and regulations. However
your phone may cause interference with
other electronic devices. Consequently you
should follow all local recommendations and
regulations when using your cellular phone both at
61
home and when away. Regulations on the use of
cellular phones in vehicles and aircraft are
particularly stringent.
Public concern has been focused for some time on the
possible health risks for users of cellular phones. The
current research on radio wave technology, including
the GSM technology, has been reviewed and safety
standards have been drawn up to ensure protection
from exposure to radio wave energy. Your cellular
telephone complies with all applicable safety
standards and the Radio Equipment and
Telecommunications Terminal Equipment Directive
1999/5/EC.
Always switch off your phone...
Inadequately protected or sensitive electronic
equipment may be affected by radio energy. This
interference can lead to accidents.
Before boarding an aircraft and/or when
packing the phone in your luggage: the use
of mobile phones in an aircraft may be
dangerous for the operation of the aircraft, disrupt the
mobile phones network and may be illegal.
In hospitals, clinics, other health care
centres and anywhere else where you may be
in the close vicinity of medical equipment.
62
In areas with a potentially explosive
atmosphere (e.g. petrol stations and also
areas where the air contains dust particles,
such as metal powders).
In a vehicle transporting flammable products (even if
the vehicle is parked) or a vehicle powered by liquefied
petroleum gas (LPG), check first that the vehicle
complies with the applicable safety rules.
In areas where you are requested to turn off radio
transmitting devices, such as quarries or other areas
where blasting operations are in progress.
Check with the vehicle manufacturer that
electronic equipment used in your vehicle
will not be affected by radio energy.
Pacemakers
If you have a pacemaker:
• Always keep the phone more than 15 cm from your
pacemaker when the phone is switched on, in order
to avoid potential interference.
• Do not carry the phone in a breastpocket.
• Use the ear opposite to the pacemaker to minimise
the potential interference.
• Switch off your phone if you suspect that
interference is taking place.
Hearing aids
same place. When in idle screen and while you are
moving, your phone consumes energy to transmit
updated location information to the network.
Setting the backlight for a shorter period of time as
well as avoiding unnecessary navigating in the menus
will also help to save the battery’s energy for longer
phoning and stand-by performances.
If you are a user of a hearing aid, consult your
physician and hearing aid manufacturer to learn
whether your particular device is susceptible to
cellular phone interference.
Improved performance
In order to improve the performance of your phone,
reduce radio energy emission, reduce battery
consumption and ensure safe operation adhere to the
following guidelines:
For the optimal and satisfactory operation of
the phone you are recommended to use the
phone in the normal operating position
(when not using in hands-free mode or with
a hands-free accessory).
• Do not expose your phone to extreme temperatures.
• Treat the phone with care. Any misuse will void the
International Guarantee.
• Do not immerse the phone in any liquid; if your
phone is damp, switch it off, remove the battery
and let them dry for 24hrs before using them again.
• To clean the phone, wipe it with a soft cloth.
• Placing and receiving calls consumes the same
amount of battery energy. However, the mobile
consumes less energy in idle screen when kept in the
Battery information
•
•
•
•
•
Your phone is powered by a rechargeable battery.
Use specified charger only.
Do not incinerate.
Do not deform or open the battery.
Do not allow metal objects (such as keys in your
pocket) to short circuit the battery contacts.
• Avoid exposure to excessive heat (>60° C or
140° F), moisture or caustic environments.
You should only use Philips Authentic
battery and accessories, as the use of any
other accessories may damage your phone
and may be dangerous, and will make all
guarantees for your Philips phone null and
void. The use of an incorrect type of battery may also
cause an explosion.
63
Make sure damaged parts are replaced immediately by
a qualified technician and that they are replaced with
genuine Philips replacement parts.
Your mobile phone and your car
Studies have shown that speaking on the
telephone while driving lowers your
concentration, which can be dangerous.
Adhere to the following guidelines:
• Give your full attention to driving. Pull off the road
and park before using the phone.
• Respect the local regulations in countries where you
drive and use your GSM phone.
• If you want to use your phone in a vehicle, install
the hands-free car kit which is designed for that
purpose.
• Ensure that your phone and car kit do not block any
air bags or other security devices fitted in your car.
The use of an alarm system to operate a vehicle's light
or horn to indicate incoming phone calls is prohibited
on public roads in some countries. Check local
regulations.
EN 60950 Norm
In hot weather or after prolonged exposure to the sun
(e.g., behind a window or a windscreen), the
temperature of your phone's casing might increase,
especially when featuring a metallic finish. Be very
careful in this case when picking up your phone and
also avoid using it with an ambient temperature over
40° C or below 5° C.
Environmental care
Remember to observe the local regulations
regarding the disposal of the packaging
materials, exhausted batteries and old phone
and please promote their recycling.
Philips has marked the battery and packaging with
standard symbols designed to promote the recycling
and appropriate disposal of your eventual waste.
The labelled packaging material is
recyclable.
A financial contribution has been made
to the associated national packaging
recovery and recycling system.
The plastic material is recyclable (also
identifies the type of plastic).
64
WEEE Marking in the DFU:
“Information to the Consumer”
Disposal of your old product
Your product is designed and manufactured with high
quality materials and components, which can be
recycled and reused.
When this crossed-out wheeled bin
symbol is attached to a product it means
the product is covered by the European
Directive 2002/96/EC
Please inform yourself about the local
separate collection system for electrical
and electronic products.
Please act according to your local rules and do not
dispose of your old products with your normal
household waste. The correct disposal of your old
product will help prevent potential negative
consequences for the environment and human health.
65
Troubleshooting
The phone does not switch on
Remove/reinstall the battery. Then charge the phone
until the battery icon stops scrolling. Unplug the
charger and try to switch on the phone.
Your phone doesn’t return to idle screen
Your battery seems to over heat
You might be using a charger that was not intended
for your phone. Make sure you always use the Philips
authentic accessory shipped with your phone.
Your phone doesn’t display the phone
numbers of incoming calls
Long press the hangup key or switch off the phone,
check that the SIM card and the battery are installed
correctly and switch it on again.
This feature is network and subscription dependent.
If the network doesn’t send the caller’s number, the
phone will display Call 1 or Withheld instead. Contact
your network operator for more information.
The network symbol is not displayed
You can’t send text messages
The network connection is lost. Either you are in a
radio shadow (in a tunnel or between tall buildings) or
you are outside the network coverage area. Try from
another place, try to reconnect to the network
(especially when abroad), check that the antenna is in
place if your mobile phone has an external antenna, or
contact your network operator for assistance/
information.
The display doesn’t respond (or the
display responds slowly) to key presses
The display responds more slowly at very low
temperatures. This is normal and does not affect the
operation of the phone. Take the phone to a warmer
place and try again. In other cases, please contact your
phone supplier.
66
Some networks don’t allow message exchanges with
other networks. First check that you have entered the
number of your SMS centre, or contact your operator
for more information.
You can’t display pictures
A picture may not be accepted by your mobile phone
if it is too large, if its name is too long, or if it doesn’t
have the correct file format.
You have the feeling that you missed
some calls
Check your call divert options.
The display shows INSERT SIM
Check that the SIM card has been inserted correctly.
If the problem remains, your SIM card may be
damaged. Contact your network operator.
When attempting to use a feature in the
menu, the mobile displays NOT
ALLOWED
Some features are network and subscription
dependent. They are only available, therefore, if the
network or your subscription supports them. Contact
your network operator for more information.
Your phone is not charging
If your battery is completely flat, it might take a while
before the charging icon is displayed on the screen.
67
Philips Authentic
Accessories
Some accessories, such as battery and charger, are
included as standard accessories in your mobile phone
package. Additional accessories may also be provided
or sold separately. Package contents may therefore
vary.
To maximise the performance of your Philips mobile
phone and not to void the warranty, always purchase
Philips Authentic Accessories that are specially
designed for use with your phone. Philips Consumer
Electronics cannot be held liable for any damage due
to use with non-authorised accessories.
Charger
Charges your battery in any AC outlet. Small enough
to carry in a briefcase/handbag.
Headset
Your phone will activate headset mode automatically
when you plug in the headset. And you can select
"auto" option in answer mode. If this option’s status
is "on", your phone will automatically answer the
incoming call in 5 or 10 seconds.
68
USB cable
The USB cable enables high speed communication
between your phone and your computer. You can
then manage the information stored in your phone
such as image, animation, photo, video and music.
You can also use the cable to connect your phone to a
Webcam or charge the battery (this charging mode is
compatible with most computers).
Data connect kit
Provides easy data connection to your Philips mobile
phone. The USB cable enables high-speed
communication between your phone and your
computer. The software provided allows you to copy,
move and delete pictures and melodies.
Trademark Declaration
T9 ® is a trademark of Tegic
Communications Inc.
Tegic Euro. Pat.
App. 0842463
Bluetooth™ is a trade-mark
owned by telefonaktiebolaget
L M Ericsson, Sweden and
licensed to Philips.
69
Specific Absorption Rate Information
International standards
THIS MOBILE PHONE MEETS THE INTERNATIONAL RECOMMENDATIONS FOR EXPOSURE TO
RADIO WAVES
Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for
exposure to radio frequency (RF) energy defined by the international standards. These recommendations have been
established by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) and, the Institute
of Electrical and Electronics Engineers (IEEE) that forecast a substantial safety margin for assuring the protection
of all persons, regardless of age and health.
The exposure recommendations for mobile phones use a measurement unit known as the Specific Absorption Rate
(SAR). The SAR limit recommended by the ICNIRP for the mobile phones used by the general public is 2.0W/
kg averaged over ten grams of tissue and, is 1,6W/kg averaged over one gram of tissue by IEEE Std 1528 for the
head.
Tests for SAR have been conducted using recommended operating positions with the mobile phone transmitting
at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest
certified power level, the actual SAR levels of the mobile phone while operating are generally below the maximum
SAR value. This is because the phone is designed to operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a base station antenna, the lower the power output.
While there may be differences between the SAR levels of various phones and at various positions, they all meet
the international protection standards for exposure to radio waves.
The highest SAR value for this Philips Xenium 9@9w model phone when tested for compliance against the
standard was 0,868W/kg for ICNIRP recommendation and 1,21W/kg for IEEE Std 1528.
For limiting the radio waves exposure, it is recommended to reduce the mobile phone call duration or to use a
headset. The purpose of those precautions is to take the mobile phone away from the head and the body.
70
Specific Absorption Rate Information
Limited warranty
1.
Workmanship During The Limited Warranty
Period?
What Does This Limited Warranty Cover?
During the limited warranty period, Philips or its
authorized service representative will, at its
option either repair or replace, without charge for
parts or labour, a materially defective Product
with new or refurbished parts or Product and
return such repaired or replaced Product to the
Consumer in working condition. Philips will
retain defective parts, modules or equipment.
Philips warrants to the original retail purchaser
(“Consumer” or “You”) that this Philips cellular
product and all accessories originally provided by
Philips in the sales package (“Product”) are free
from defects in materials, design and
workmanship under normal use in accordance
with the operating instructions and pursuant to
the following terms and conditions. This limited
warranty extends only to the Consumer for
Products purchased and used in the original
country of purchase. The limited warranty is
valid only in Philips’ intended country of sales of
the product.
2.
How Long is The Limited Warranty Period?
The limited warranty period for the Product
extends for ONE (1) YEAR from the date of
purchase of the Product, documented by valid
proof of purchase. The limited warranty for
original Philips rechargeable battery extends for
six (6) months from the date of purchase.
3.
Repaired or replaced Product will be covered by
this limited warranty for the balance of the
original limited warranty period or ninety (90)
days from the date of repair or replacement
whichever is longer. Repair or replacement of
Product, at Philips’ option is your exclusive
remedy.
What Will Philips Do if The Product is Not Free
From Material Defects in Materials and
4.
What is Not Covered By This Limited Warranty?
This limited warranty does not cover:
a)
Product that has been subjected to misuse,
accident, shipping or other physical damage,
improper installation, abnormal operation
handling, neglect, inundation, fire, water or
other liquid intrusion; or
71
b) Product that has been damaged due to
repair, alteration, or modification by anyone
not authorized by Philips; or
c) Product that has reception or operation
problems caused by signal conditions,
network reliability or cable or antenna
systems; or
d) Product defects or problems caused by uses
with non-Philips products or accessories; or
e) Product which warranty/quality stickers,
product serial number or electronic serial
number has been removed, altered or
rendered illegible; or
f) Product purchased, used, serviced, or
shipped for repair from outside the original
country of purchase, or used for commercial
or institutional purposes (including but not
limited to Products used for rental
purposes); or
g) Product returned without valid proof of
purchase or which proof of purchase has
been altered or is illegible.
h) Normal wear and tear or Force Majeure.
5.
How Do You Get Warranty Service?
a)
72
Return the Product to an authorized service
center of Philips. You may contact the local
Philips office for the location of the nearest
authorized service center.
b) The SIM card must be removed from the
Product before it is given to Philips. Philips
assumes no liability for damaged or loss of
the SIM card or the data contained therein.
c) If the Product failure is not covered by this
limited warranty, or this limited warranty is
inapplicable, void or invalid due to any
terms and conditions stated herein, the
Consumer will be charged for the cost of
repair or replacement of the Product and all
other related cost incurred in repairing or
replacing the Product.
d) IMPORTANT - you are required to return
the Product together with a valid proof of
purchase which must identify the point of
purchase, date of purchase, Product model
and Product serial number clearly.
6. Other Limitation: This Warranty is The Entire
Agreement.
EXCEPT
FOR
THE
EXPRESS
WARRANTIES SET FORTH ABOVE AND
THOSE IMPLIED BY LAW AND WHICH
CANNOT BE EXCLUDED OR MODIFIED
BY AGREEMENT, PHILIPS PROVIDES NO
OTHER WARRANTY WHETHER EXPRESS
OR IMPLIED (WHETHER BY STATUTE,
UNDER THE OPERATION OF LAW OR
OTHERWISE) AND SPECIALLY DISCLAIMS
ANY WARRANTY OF SATISFACTORY
QUALITY
MERCHANTABILITY
OR
FITNESS FOR A PARTICULAR PURPOSE.
PHILIPS’
TOTAL
LIABILITY
FOR
DAMAGES RELATING TO OR ARISING
OUT OF THE PURCHASE OR USE OF THE
PRODUCT, REGARDLESS OF THE TYPE
OR CAUSE OF SUCH DAMAGE OR THE
FORM OR CHARACTERISATION OF THE
CLAIM ASSERTED (E.G. CONTRACT OR
TOPIT), SHALL NOT EXCEED THE
ORIGINAL PURCHASE PRICE PAID FOR
THE PRODUCT.
HOWEVER IN NO EVENT SHALL PHILIPS
BE LIABLE FOR ANY PUNITIVE, SPECIAL,
INCIDENTAL,
INDIRECT
OR
CONSEQUENTIAL DAMAGES (INCLUDING
BUT NOT LIMITED TO THE LOSS OF
USE, LOSS OF TIME, INCONVENIENCE,
COMMERIAL LOSS, LOST PROFITS, LOST
BUSINESS OPPORTUNITIES, COST OF
SUBSTITUTION
OF
GOODS
OR
SERVICES, INVESTMENTS, DAMAGE TO
GOODWILL OR REPUTATION, OR LOSS
OF DATA AND CLAIMS BY THIRD
PARTIES) RESULTING FROM PURCHASE
OR USE OF THE PRODUCT, TO THE
FULLEST EXTENT ALLOWED BY LAW,
WHETHER OR NOT PHILIPS HAS BEEN
ADVISED OF THE POSSIBILTY OF SUCH
DAMAGES. THESE LIMITATIONS SHALL
APPLY
NOTWITHSTANDING
THE
FAILURE OF THE ESSENTIAL PURPOSE
OF ANY LIMITED REMEDY.
This limited warranty represents the complete
and exclusive agreement between the Consumer
and Philips with respect to this cellular Product
and it supercedes all prior agreements between
the parties, oral or written, and all other
communications between the parties relating to
the subject matter of this limited warranty. No
carrier, retailer, agent, dealer, employee, thereof,
or employee of Philips is authorized to make
modifications to this limited warranty and you
should not rely on any such representation.
This limited warranty does not affect the
Consumer’s statutory rights under applicable
national laws in force.
73
Declaration of
conformity
We,
Shenzhen Sang Fei Consumer
Communications Co., Ltd.
11 Science and Technology Road,
Shenzhen Hi-tech Industrial Park,
Nanshan District, Shenzhen 518057,
China.
declare under our sole responsibility that the product
CT9@9w
Cellular Mobile Radio GSM 900/1800/1900
TAC: 358233 00
to which this declaration relates, is in conformity with
the following Standards:
EN 60950, EN 50360 and EN 301 489-07
EN 301 511 v 9.0.2
We hereby declare that all essential radio test suites
have been carried out and that the above named
product is in conformity to all the essential
requirements of Directive 1999/5/EC.
The conformity assessment procedure referred to in
Article 10 and detailed in Annex V of Directive 1999/
5/EC has been followed related to articles 3.1 and 3.2
with the involvement of the following Notified Body:
BABT, Balfour House, Churchfield Road, WaltononThames, KT12 2TQ. UK
Identification mark: 0168
June 12, 2007
Quality Manager