Philips SE6591B Cordless phone answer machine

Register your product and get support at
www.philips.com/welcome
SE659
US-EN
Telephone Answering Machine
Warning
Use only rechargeable batteries.
Charge the handset for 24 hours before use.
Table of contents
1
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.7.1
2.7.2
2.8
2.9
2.10
3
3.1
3.2
Important Safety
Instructions
4
Environment and safety 6
Safety information
6
Power requirements
6
Battery requirements
6
Telephone connection
6
Environmental care
7
Precautions
7
Equipment Approval
Information
8
Notification to the Local
Telephone Company
8
Rights of the Phone
Company
8
Interference Information
9
Hearing Aid Compatibility
(HAC)
10
FCC RF Radiation Exposure
Statement
10
10
11
3.3
Important
Power requirements
Electric, Magnetic and
Electromagnetic Fields
(“EMF”)
Recycle your batteries
4
4.1
The RBRC® seal
Service Centers
12
13
5
5.1
5.2
Your phone
14
What’s in the box
14
Overview of your handset 15
Table of contents
12
12
5.3
5.4
5.5
Display icons and Messages 18
Overview of the base
station
20
Base station display
22
6
Conventions Used in this
Manual
22
7
7.1
7.2
7.3
7.3.1
7.3.2
7.4
7.5
7.6
7.7
7.8
Getting started
Connect the base station
Wall mounting the base
Install your phone
Install battery
Charge battery
Remove/Attach belt clip
Install optional headset
Power up
Using multipacks
Handset menu structure
8
8.1
8.1.1
8.1.2
8.1.3
8.1.4
8.1.5
8.1.6
Using your phone
33
Make a call
33
Predialling
33
Direct dialling
33
Call from redial list
33
Call from the call log
34
Call from the phonebook 34
Call from the phonebook while
already on the phone
34
Call using Direct Access
Memory
35
Enter a Dialing Pause
35
Answer a call
35
Handsfree answering with
handset
35
8.1.7
8.1.8
8.2
8.2.1
23
23
24
25
25
25
26
26
26
27
28
1
8.3
8.4
8.5
8.5.1
8.5.2
8.5.3
8.5.4
8.5.5
9
9.1
9.2
9.3
9.4
9.5
9.5.1
9.5.2
9.5.3
9.6
9.7
9.7.1
9.7.2
9.7.3
9.7.4
9.7.5
9.8
9.9
9.9.1
9.9.2
2
Answer a call on the other
line
36
End a call
36
Using the Redial list
36
Access Redial list
36
View redial number details 36
Save a redial number into the
phonebook
36
Delete a redial number
37
Delete all redial numbers 37
9.9.3
9.9.4
Use more of your
phone
38
Switch the handset off/on 38
Handset keypad lock/
unlock
38
Text or number entry
38
Call waiting
38
Call in progress
38
Adjust earpiece or speaker
volume
39
Mute/Unmute microphone 39
Activate/Deactivate handset
loudspeaker mode
39
Chain dialing
39
Using the Intercom
39
Intercom another unit
39
Transfer an external call to
another unit
40
Answer an external call during
intercom
40
Switch between an internal and
external call
40
Establish a three-party
conference call
40
Locate Handset
41
Clock and Alarm settings 42
Set Date and Time
42
Set Time and Date Format 42
10.5
10.6
10
10.1
10.2
10.3
10.4
10.7
10.7.1
10.7.2
11
11.1
11.1.1
11.2
11.3
11.4
12
12.1
12.2
12.2.1
12.2.2
12.2.3
12.3
Set Alarm (Handset only)
Set Alarm Tone
(Handset only)
Using your Phonebook
Store a contact in the
phonebook
Access phonebook
Modify a phonebook entry
Select phonebook melody
(Handset only)
Delete a phonebook entry
Delete all phonebook
entries
Direct Access Memory
Add/Edit Direct Access
Memory
Delete Direct Access
Memory
42
43
43
43
44
44
44
45
45
45
45
46
Using the Call log
46
Access the Call log
46
To choose the format for call
log display
47
Save call list entry into the
phonebook
47
Delete a call list entry
47
Delete all call list entries 48
Personal settings
48
Change the Handset Name
(Handset only)
48
Ring Settings
48
Set the Ring Volume
48
Set the Ring Tones
49
Activate/Deactivate Key
Beep
49
Change the Display
Language
49
Table of contents
12.4
12.5
12.6
12.7
12.8
12.9
Select the Display Wallpaper
(Handset only)
50
Select the Color Theme
(Handset only)
50
Set the Display Contrast 50
Set the Backlight Time
(Handset only)
51
Deactivate/Activate Auto
Hang-Up (Handset only) 51
Changing the Line Setting
(Base Station only)
51
14.1.2
Set Voice Mail Number
15
Telephone answering
machine (TAM)
60
Playing Messages
61
Playback of messages via
handset
61
Functions available during
playback
61
Delete all messages from the
handset
61
Turn the Answering Machine
On/Off from the Handset 62
Play, Record, or Delete an
Outgoing Message
62
Set the Answer mode
62
Answering Machine
Settings
63
Ring Delay
63
Remote Access
63
Handset Screening
64
Setting the Outgoing Message
Language
65
15.1
15.1.1
15.1.2
15.2
15.3
13
13.1
13.1.1
13.1.2
13.2
13.3
13.3.1
13.3.2
13.4
13.5
13.6
13.6.1
13.6.2
13.7
13.8
13.9
13.10
13.11
13.12
13.13
13.14
52
52
52
52
53
53
53
53
54
54
54
55
55
55
56
56
56
57
57
57
13.15
Advanced settings
Easy Call
Set Easy Call to On or Off
Set Easy Call number
Auto Conference
Call Barring
Set Call Barring Mode
Set a Call Barring number
XHD Sound
Change PIN
Registration
Easy registration
Manual registration
Unregister
Reset Unit
Set Area Code
Set Auto Prefix
Change Flash time
Change the Dial Mode
Set First Ring Detection
Changing the Line Setting
(Handset only)
Default Settings
14
14.1
14.1.1
Network Service
Voice Mail
Access Voice Mail
59
59
60
Table of contents
58
59
15.4
15.5
15.6
15.6.1
15.6.2
15.6.3
15.6.4
60
16
Technical data
65
17
17.1
17.2
17.3
17.4
Frequently asked
questions
Connection
Set-up
Sound
Product behaviour
66
66
66
66
67
18
INDEX
69
3
1
Important Safety
Instructions
7
Some of the following information may
not apply to your particular product;
however, when using telephone
equipment, basic safety precautions
should always be followed to reduce the
risk of fire, electric shock and injury to
persons, including the following:
1 Read and understand all
instructions.
2 Follow all warnings and instructions
marked on the product.
3 Unplug this product from the wall
outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
4 Telephones should not be used
while you are in a bathtub, shower
or pool. Immersion of the
telephone or handset in water could
cause an electrical shock.
5 Slots and openings in the cabinet
back or bottom are provided for
ventilation, to protect it from
overheating.These openings must
not be blocked or covered. The
openings should never be blocked
by placing the product on the bed,
sofa, rug, or other similar
surface.This product should not be
placed in a built-in installation unless
proper ventilation is provided.
6 This product should be operated
only from the type of power source
4
8
9
10
11
12
13
indicated on the marking label. If
you are not sure of the type of
power supply to your home, consult
your dealer or local power
company.
Do not allow anything to rest on
the power cord. Do not locate this
product where the cord will be
abused by persons walking on it.
Do not overload wall outlets and
extension cords as this can result in
the risk of fire or electric shock.
Never push objects of any kind into
this product through cabinet slots as
they may touch dangerous voltage
points or short out parts that could
result in a risk of fire or electric
shock.
Never spill liquid of any kind on the
product.
To reduce the risk of electric shock,
do not disassemble this product, but
take it to a qualified service
personnel when service or repair
work is required. Opening or
removing covers may expose you to
dangerous voltages or other risks.
Incorrect reassembly can cause
electric shock when the appliance is
subsequently used.
Do not expose the product to
extreme temperatures such as areas
near a hot radiator or stove or in a
hot car.
Do not place lighted candles,
cigarettes, cigars, etc., on the
telephone.
Never touch uninsulated telephone
wires or terminals unless the
Important Safety Instructions
telephone line has been
disconnected at the network
interface.
14 Never install or modify telephone
wiring during a lightning storm.
15 Never install telephone jacks in wet
locations unless the jack is
specifically designed for wet
locations.
16 Use caution when installing or
modifying telephone lines to
prevent electrical shock and/or fire.
17 Unplug this product from the wall
outlet and refer servicing to
qualified service personnel under
the following conditions:
A When the power supply cord or
plug is damaged or frayed.
B If the product has been exposed to
rain or water.
C If the product does not operate
normally by following the operating
instructions.
D If the product’s cabinet has been
damaged.
E If the product exhibits a distinct
change in performance.
18 Avoid using a telephone (other than
a cordless type) during an electrical
storm. There may be a remote risk
of electric shock from lightning.
19 Do not use the telephone to report
a gas leak in the vicinity of the leak.
20 Do not place this product on an
unstable cart, stand or table.The
product may fall, causing serious
damage to the product.
IF YOUR PRODUCT UTILIZES
BATTERIES,THE FOLLOWING
Important Safety Instructions
ADDITIONAL PRECAUTIONS
SHOULD BE OBSERVED:
1 Use only the type and size of
battery(ies) specified in the user
manual.
2 Do not dispose of the battery(ies)
in fire. They may explode. Check
with local codes for possible special
disposal instructions.
3 Do not open or mutilate the
battery(ies). Released electrolyte is
corrosive and may cause damage to
the eyes or skin. It may be toxic if
swallowed.
4 Exercise care in handling
battery(ies) in order not to short
out the battery(ies) with conducting
materials such as rings, bracelets,
and keys.The battery(ies) or
conductor may overheat and cause
burns.
5 Do not attempt to recharge the
battery(ies) provided with or
identified for use with this product
that are not intended to be
charged.The battery(ies) may leak
corrosive electrolyte or explode.
6 Do not attempt to rejuvenate the
battery(ies) provided with or
identified for use with this product
by heating them. Sudden release of
the battery(ies) electrolyte may
occur causing burns or irritation to
eyes or skin.
7 When replacing battery(ies), all
batteries should be replaced at the
same time. Mixing fresh and
discharged batteries could increase
internal cell pressure and rupture
5
the discharged battery(ies). (Applies
to products employing more than
one separately replaceable primary
battery.)
8 When inserting battery(ies) into
this product, the proper polarity or
direction must be observed.
Reverse insertion of battery(ies) can
cause charging, and that may result
in leakage or explosion.
9 Remove battery(ies) from this
product if storing over 30 days
because the battery(ies) could leak
and damage the product.
10 Discard “dead” battery(ies) as soon
as possible since “dead” batteries
are more likely to leak in a product.
11 Do not store this product, or the
battery(ies) provided with or
identified for use with this product,
in high temperature areas.
Batteries that are stored in a freezer
or refrigerator for the purpose of
extending shelf life should be
protected from condensation during
storage and defrosting. Batteries
should be stabilized at room
temperature prior to use after cold
storage.
12 If your product uses rechargeable
battery(ies), charge the battery(ies)
only in accordance with the
instructions and limitation specified
in the User Manual.
SAVE THESE INSTRUCTIONS
2
Environment and
safety
2.1
Safety information
This telephone is not designed for
making emergency telephone calls when
the power fails. An alternative should be
made available for access to emergency
calling.
2.2
Power requirements
This product requires an electrical supply
of 120 volts, single phase alternating
current, excluding IT installations defined
in standard UL 60950.
2.3
Battery requirements
The handset requires power source of
two rechargeable NiMH batteries, size
AAA 1.2V 600mAh (Hr11/45). IF THE
INCORRECT TYPE OF BATTERIES ARE
USED,A WARNING MESSAGE WILL BE
DISPLAYED.
Use only Philips Multi-Life 600mAh
rechargeable NimH batteries.
For servicing or replacement, you can
purchase a suitable headset through
service centre or retail shop.
2.4
Telephone connection
The voltage on the network is classified
as TNV- 3 (Telecommunication Network
Voltages, as defined in the standard UL
6
Environment and safety
60950). Following a power cut, the call in
progress is lost.
Caution
Users should ensure for their own
protection that the electrical ground
connections of the power utility,
telephone lines and internal metallic
water pipe system, if present, are
connected together. This precaution may
be particularly important in rural areas.
2.5
Environmental care
Please remember to observe the local
regulations regarding the disposal of your
packaging materials, exhausted batteries
and old phone and where possible
promote their recycling.
2.6
Precautions
• Do not allow the handset to come
into contact with liquids or moisture.
• Do not open the handset, base station
or charger.This could expose you to
high voltages.
• Do not allow the charging contacts of
the charger or the battery to come
into contact with extraneous
conductive materials.
• There is a slight chance that the
telephone could be damaged by an
electrical storm. It is recommended
that users unplug the phone from the
USB socket and the phone line from
the phone wall socket during a storm.
• Because the phone works by sending
radio signals between the base unit
and the handset, wearers of hearing
Environment and safety
aids may experience interference in
the form of a humming noise.
• We advise that this phone should not
be used near intensive care medical
equipment, nor by persons with
pacemakers.
• Your phone can interfere with
electrical equipment such as
answering machines, TV and radio
sets, clock radios and computers if
placed too close. It is recommended
that you position the base unit at least
one meter from such appliances.
Caution
Use only the mains adapter supplied with
this telephone. Incorrect adapter polarity
or voltage can seriously damage the unit.
Base adapter:
Input: 100 V - 240 VAC 50/60 Hz
Output: 6 VDC 500 mA
Charger adapter:
Input: 100 V - 240 VAC 50/60 Hz
Output: 6 VDC 210 mA
Caution
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE.
Never use non-rechargeable batteries;
use recommended type supplied with
this telephone. NiMH batteries must be
disposed of in accordance with the
applicable waste disposal regulations.
FCC CERTIFICATION NUMBER IS
LOCATED ON THE CABINET
BOTTOM
The term “IC:” before the certification
number signifies that Industry Canada
technical specifications were met.This
certification means that the equipment
7
meets certain radio communications and
operational requirements.
2.7
Equipment Approval
Information
Your telephone equipment is approved
for connection to the public switched
telephone network and is in compliance
with parts 15 and 68, FCC Rules and
Regulations and the Technical
Requirements for Telephone Terminal
Equipment published by ACTA.
2.7.1 Notification to the Local
Telephone Company
On the bottom of this equipment is a
label indicating, among other
information, the US number and Ringer
Equivalence Number (REN) for the
equipment.You must, upon request,
provide this information to your
telephone company.
The REN is useful in determining the
number of devices you may connect to
your telephone line and still have all of
these devices ring when your telephone
number is called. In most (but not all)
areas, the sum of the RENs of all devices
connected to one line should not exceed
5. To be certain of the number of devices
you may connect to your line as
determined by the REN, you should
contact your local telephone company.
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
8
applicable FCC Part 68 rules and
requirements adopted by the ACTA.
A compliant telephone cord and modular
plug is provided with this product. It is
designed to be connected to a
compatible modular jack that is also
compliant. See installation instructions
for details.
Notes
• This equipment may not be used on
coin service provided by the
telephone company.
• Party lines are subject to state tariffs,
and therefore, you may not be able to
use your own telephone equipment if
you are on a party line. Check with
your local telephone company.
• Notice must be given to the
telephone company upon permanent
disconnection of your telephone from
your line.
• If your home has specially wired alarm
equipment connected to the
telephone line, ensure the installation
of this product does not disable your
alarm equipment. If you have
questions about what will disable
alarm equipment, consult your
telephone company or a qualified
installer.
2.7.2 Rights of the Phone
Company
Should your equipment cause trouble on
your line which may harm the telephone
network, the telephone company shall,
where practicable, notify you that
Environment and safety
temporary discontinuance of service may
be required.Where prior notice is not
practicable and the circumstances
warrant such action, the telephone
company may temporarily discontinue
service immediately. In case of such
temporary discontinuance, the telephone
company must:
(1) promptly notify you of such
temporary discontinuance; (2) afford you
the opportunity to correct the situation;
and (3) inform you of your right to bring
a complaint to the Commission pursuant
to procedures set forth in Subpart E of
Part 68, FCC Rules and Regulations.
The telephone company may make
changes in its communications facilities,
equipment, operations or procedures
where such action is required in the
operation of its business and not
inconsistent with FCC rules and
Regulations. If these changes are
expected to affect the use or
performance of your telephone
equipment, the telephone company must
give you adequate notice, in writing, to
allow you to maintain uninterrupted
service.
2.8
Interference Information
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful
interference; and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
Environment and safety
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna (that is, the antenna for radio
or television that is “receiving” the
interference).
• Reorient or relocate and increase the
separation between the
telecommunications equipment and
receiving antenna.
• Connect the telecommunications
equipment into an outlet on a circuit
different from that to which the
receiving antenna is connected.
If these measures do not eliminate the
interference, please consult your dealer
or an experienced radio / television
technician for additional suggestions.
Also, the Federal Communications
9
Commission has prepared a helpful
booklet, “How To Identify and Resolve
Radio/TV Interference Problems”. This
booklet is available from the U.S.
Government Printing Office,
Washington, D.C. 20402.
Please specify stock number 004-00000345-4 when ordering copies.
Notice: The changes or modifications
not expressly approved by the party
responsible for compliance could void
the user’s authority to operate the
equipment.
2.9
Hearing Aid Compatibility
(HAC)
This telephone system meets FCC and
Industry Canada standards for Hearing
Aid Compatibility.
2.10
FCC RF Radiation Exposure
Statement
This equipment complies with FCC RF
radiation exposure limits set forth for an
uncontrolled environment.This
equipment should be installed and
operated with a minimum distance of
20 centimeters between the radiator and
your body.This transmitter must not be
co-located or operating in conjunction
with any other antenna or transmitter.
For hand held operation, this phone has
been tested and meets the FCC RF
exposure guidelines. Use of other
accessories may not ensure compliance
with FCC RF exposure guidelines.
10
3
Important
Take time to read this user manual
before you use your phone. It contains
important information and notes
regarding your phone.
NOTICE: This product meets the
applicable Industry Canada technical
specifications.
The equipment must be installed using an
acceptable method of connection. The
customer should be aware that
compliance with the above conditions
may not prevent degradation of service
in some situations.
Repairs to certified equipment should be
made by an authorized Canadian
maintenance facility designated by the
supplier. Any repairs or alterations made
by the user to this equipment, or
equipment malfunctions, may give the
telecommunications company cause to
request the user to disconnect the
equipment.
Users should ensure for their own
protection that the electrical ground
connections of the power utility,
telephone lines and internal metallic
water pipe systems, if present, are
connected together. This precaution may
be particularly important in rural areas.
CAUTION: Users should not attempt to
make such connections themselves, but
should contact the appropriate electric
inspection authority, or electrician, as
appropriate.
Important
NOTES: This equipment may not be used
on coin service provided by the
telephone company.
3.1
Power requirements
• This product requires an electrical
supply of 100-240 volts AC. In case of
power failure, the communication can
be lost.
• The Electrical network is classified as
hazardous. The only way to power
down the charger is to unplug the
power supply from the electrical
outlet. Ensure that the electrical
outlet is always easily accessible.
• The voltage on the network is
classified as TNV-3
(Telecommunication Network
Voltages), as defined in the standard
UL 60950.
Warning
To avoid damage or malfunction:
• Do not allow the charging contacts or
the battery to come into contact with
metal objects.
• Do not open it as you could be
exposed to high voltages.
• Do not allow the charger to come
into contact with liquids.
• Never use any other battery than the
one delivered with the product or
recommended by Philips: risk of
explosion.
• Always use the cables provided with
the product.
• Handsfree activation could suddenly
increase the volume in the earpiece to
Important
a very high level: make sure the
handset is not too close to your ear.
• This equipment is not designed to
make emergency calls when the
power fails. An alternative has to be
made available to allow emergency
calls.
• Do not expose the phone to
excessive heat caused by heating
equipment or direct sunlight.
• Do not drop your phone or allow
objects to fall on your phone.
• Do not use any cleaning agents
containing alcohol, ammonia, benzene,
or abrasives as these may harm the
set.
• Do not use the product in places
where there are explosive hazards.
• Do not let small metal objects come
into contact with the product. This
can deteriorate audio quality and
damage the product.
• Active mobile phones in the vicinity
may cause interference.
About operating and storage
temperatures:
• Operate in a place where
temperature is always between 0 and
35º C (32 to 95º F).
• Store in a place where temperature is
always between -20 and 70º C (-4 to
158º F).
• Battery life may be shortened in low
temperature conditions.
11
3.2
1.
2.
3.
4.
5.
Electric, Magnetic and
Electromagnetic Fields
(“EMF”)
Philips Royal Electronics
manufactures and sells many
consumer oriented products which
usually, as with any electronic
apparatus, have the ability to emit
and receive electro magnetic signals.
One of Philips’ leading Business
Principles is to take all necessary
health and safety precautions for
our products, to comply with all
applicable legal requirements and to
stay well within the EMF standards
applicable at the time of producing
the products.
Philips is committed to develop,
produce and market products that
cause no adverse health effects.
Philips confirms that if its products
are handled properly for their
intended use, they are safe to use
according to scientific evidence
available today.
Philips plays an active role in the
development of international EMF
and safety standards, enabling Philips
to anticipate further developments
in standardisation for early
integration in its products.
3.3
Recycle your batteries
Do not dispose your rechargeable
batteries. Call the toll fee number 1-800822-8837 to get instructions on how to
recycle your batteries.
12
4
The RBRC® seal
The RBRC® Seal
on the nickel metal
hydride battery
indicates that
Philips Royal
Electronics is
voluntarily
participating in an industry program to
collect and recycle these batteries at the
end of their useful lives, when taken out
of service within the United States and
Canada.
The RBRC® program provides a
convenient alternative to placing used
nickel metal hydride batteries into the
trash or municipal waste, which may be
illegal in your area.
Philips’s participation in RBRC® makes it
easy for you to drop off the spent battery
at local retailers participating in the
RBRC® program or at authorized Philips
product service centers.
Please call 1-800-8-BATTERY for
information on Ni-MH battery recycling
and disposal bans/restrictions in your
area. Philips’s involvement in this
program is part of its commitment to
protecting our environment and
conserving natural resources.
RBRC® is a registered trademark of
Rechargeable Battery Recycling
Corporation.
The RBRC® seal
4.1
Service Centers
US service center
Philips Accessories & Computer
Peripherals North America1881 Route
46 WestLedgewood, NJ 07852
Phone: (800) 233-8413
E-mail support:
http://www.support.philips.com/support
The RBRC® seal
13
5
Your phone
Congratulations on your purchase and welcome to Philips!
To fully benefit from the support that Philips offers, register your product at
www.philips.com/welcome.
5.1
What’s in the box
Handset with belt clip
Base Station
Battery door
Bracket for wall
mounting
2 AAA
rechargeable
batteries
Power supply
Line cords*
User manual
Guarantee
Do not return
leaflet
Quick Start
Guide
Note
* The black line cord is a 4-pin telephone line cord, and the gray line cord is a 2-pin
telephone line cord. Use these as explained in 7.1 Connect the base station.
In multihandset packs, you will find one or more additional handsets, chargers with power
supply units and additional rechargeable batteries.
14
Your phone
5.2
Overview of your handset
A
B
C
D
E
F
G
A Event LED
The event LED on your handset blinks
when there is a new message recorded on
your telephone answering machine. If you
have subscribed to Caller Line Identification,
the event LED also blinks when there is a
new call, or a new voice mail message.
B Earpiece
C Display
See section 5.3 for an overview of the
display icons.
Your phone
D Select key o
Press to receive an incoming call on Line
1, or to select Line 1 for making an
outgoing call.
In a menu, selects the function displayed
on the screen or go to the next lower
level. Also used to confirm entries (for
example, when setting date and time).
E Back/Clear key c
Press to receive an incoming call on Line 2,
or to select Line 2 for making an outgoing
call.
When making an entry, press to clear
(delete) a character or number, or long
press to clear all.
When navigating menus, press to move
to the previous higher menu level (Back
is displayed).
F Navigation keys n
In idle mode: Scroll up u to access the
Call log and scroll down d to access
the Phonebook.
During a call: Scroll n to increase or
decrease earpiece and speaker volume.
Editing and entry: Move to the previous
character u or next character d.
In other modes: Scroll up u and down
d a menu list or go to the previous or
next record in the Phonebook, Redial
list, or Call log.
G Talk key t
In idle mode: Make or answer an external
call on the default line, or answer an
incoming internal call.
During a call: Activate the flash function.
In other modes: Dial the selected number
in the Phonebook, Redial list, or Call log
on the default line.
15
H Hang-up/Exit key h
In idle mode: Long press (5 seconds) to
switch off the handset.
When the handset is switched off: Long
press (1 second) to switch it on.
During a call: Hang up a call.
In other modes: Press to return to idle
mode.
I
Menu key m
In idle mode: Go to the main menu.
J
Redial key r
Access the Redial list in idle mode.
K Loudspeaker key l
In idle mode: Turn on the loudspeaker
and dial the number. Answer an incoming
call on the default line using handsfree
mode.
During a call: Toggle the loudspeaker on/off.
L Number keys
Use to dial numbers and write characters.
With key 1, a long press invites you to
select a line, then dials your voice mail
subscriber access number via the
selected line. With keys 3 to 9, a long
press invites you to select a line, then
dials one of your direct memory access
numbers via the selected line.
M */Keypad lock & Format key *
In idle mode: Long press to lock/ unlock
keypad.
Predialling or editing: Press to enter a “*”.
Off hook: Long press to temporarily switch
to tone (DTMF) dialling if using pulse.
During call log display: Toggles area code
and long distance display on/off.
N #/Ringer on/off & Pause key #
In idle mode: Long press to turn the
ringer on/off.
16
R
S
T
H
I
J
K
L
U
M
N
O
P
Q
Dialling or editing: Long press to insert a
pause (during predialling) and short press
to insert a “#”.
Editing: Short press to switch upper/
lower case.
O Mute key s
When off hook: Deactivate/activate the
microphone.
P Call transfer key & Intercom
key i
In idle mode: Initiate an internal call.
During a call: Short press to hold the line
and page another handset. Long press to
set up a conference between an external
call and two handsets.
Q Microphone
R Belt clip
S Loudspeaker (underneath the
belt clip)
Warning
Handsfree activation can suddenly
increase the volume of the earpiece to a
Your phone
very high level. Make sure the handset is
not too close to your ear.
T Headset jack
U Battery door
Your phone
17
5.3
Display icons and Messages
L1 L2
Indicates that the battery is fully
charged. This icon blinks during
charge and when the battery is
low.
When the Icon is empty the
battery is practically discharged.
Note
If Warning Batt flashes together
with a blinking battery icon,
batteries of the wrong type are
installed in the handset. Replace
with batteries of the correct type.
Blinks when there is an incoming
call. Steady On during a call.
If you subscribe to voice mail
service, blinks when there is
new voice mail.
Blinks when there are new and
missed calls in the call log
records.
Appears when the alarm clock
is activated. Blinks when the
alarm time comes.
Appears when the loudspeaker
is activated.
Appears when the ringer is off.
18
L1
L2
Steady on when the answering
machine is on. Blinks when
messages have been received by
the answering machine; blinks
rapidly when answering
machine memory is full.
Indicates that the handset is
registered and within range of
the base station. Icon blinks
when the handset is out of
range or is searching for a base.
Appears when using Line 1.
Appears when using Line 2.
L1 IN USE
Steady ON when another unit
is using Line 1 (appears only in
talk mode).
L1 HOLD
Steady on when Line 1 is on
hold (appears only in talk
mode).
L1 CALL
Steady on when there is a
incoming call on Line 1 (appears
only in talk mode).
L2 IN USE
Steady ON when another unit
is using Line 2 (appears only in
talk mode).
Your phone
L2 HOLD
Steady on when Line 2 is on
hold (appears only in talk
mode).
L2 CALL
Steady on when there is a
incoming call on Line 2 (appears
only in talk mode).
Line 1/Select/OK
Line 1 selects Line 1.
Select appears when in menu
mode. Press the key directly
below to move to the next menu
level or to confirm a selection.
OK appears to request
confirmation of an operation.
Press the key directly below to
confirm.
Indicates that more options are
available in a scroll list, or that
you can adjust the volume.
Line 2/Back/Clear
Line 2 selects Line 2.
Back appears when in menu
mode. Press the key directly
below to return to the previous
menu level.
Clear appears when making an
entry. Press the key directly
below to clear (delete) a
character or number when
making an entry. Long press to
clear all.
Your phone
19
5.4
Overview of the base station
A
B
C
D
E
F G
HI
J
L K
M
N
O
P
Q
R
W
V
A Handset locator key a
Locate handset.
Long press more than 3 seconds to start
the registration procedure.
B Display
See 5.5 for an overview of the display.
C Speaker
D Play/Stop key p
Play phone messages (the first message
recorded will be played first). After
pressing this key, select Line 1 or Line 2
using the soft keys. Voice prompts are
played between messages and when all
messages have been played.
Stop message playback.
E Previous/Select Key c
During message playback: Go to the
previous message.
In menu mode: Select the function
displayed on the screen or go to the next
lower level in a menu.
F Call log/Up key u
In idle mode: Enter the call log.
In menu mode: Scroll up in the list.
20
U T S
G Back/Clear Key c
During message playback: Go to the next
message.
In menu mode: Go to the previous level
in a menu.
H Erase Key x
During message playback: Short press to
delete the current message.
In idle mode: Long press to delete all old
messages. After long pressing this key,
select Line 1 or Line 2 using the soft
keys.
I
Menu key m
Enter/exit the main menu.
J
Phonebook/Down key d
In idle mode: Enter the phonebook.
In menu mode: Scroll down in the list.
K On/Off Key e
Short press to switch the answering
machine on/off. After pressing this key,
select Line 1 or Line 2 using the soft
keys.
Your phone
L Event LED
The event LED on the base blinks during
handset locating. It is steady on when a
handset has taken the line.
M Volume Keys +In idle mode: Increase or decrease the
ring volume. Ring volume can be set
separately for each of Line 1 and Line 2.
During a conversation or during message
playback: Increase or decrease the
speaker volume.
N Speaker key l
In idle mode: Pick up the first open line
with the speaker on.
During a call: End the call. The speaker
key LED blinks when receiving an
incoming call. It is steady on when the
base is in talk mode.
O Hold/Intercom key i
In idle mode: Initiate an internal call.
During a call: End the call. The speaker
key LED blinks when receiving an
incoming call. It is steady on when the
base is in talk mode.
P Mute key s
When off hook: Mute/Unmute the
microphone.
Q Redial key r
Access the Redial list.
R
Flash/Call waiting t
Send a flash on the line. If there is an
incoming call waiting, answer the call.
S Line 1 key
In idle mode: Pick up Line 1 with the
speaker on.
During a call: Release Line 1. If there is a
current call on Line 2, pick up Line 1 and
put the call on hold on Line 2.
Your phone
T Line 2 key
In idle mode: Pick up Line 2 with the
speaker on.
During a call: Release Line 2. If there is a
current call on Line 1, pick up Line 2 and
put the call on hold on Line 1.
U Hash key #
Short press to enter a ‘#’.
Long press to enter a pause.
V Star/format key *
Enter a ‘*’.
When viewing the call log, press to
change the number format. (See
section11.1.1 - “To choose the format
for call log display.”)
W Number keys
Short press to dial numbers.
Long press keys 3 to 9 to dial a
direct access memory number.
X YZ
AA
X
Y
Z
AA
DC IN 6V jack
TEL LINE 2 phone jack
TEL LINE 1/2 phone jack
Microphone (at the bottom
front of the base station)
21
5.5
Base station display
A
B
L1
TUE 12:00 AM
FULL
L2
FULL
L1 Inuse
L2 Inuse
Softkey 1
Softkey 2
C
D
E
H G F
A Sub-screen display area
Shows answering machine status. See
below.
B Main display area
In idle mode: Displays the time and date
or new events.
In menu mode: Displays the options in
the menu.
C Ringer Off Icon
Turns on when the ringer volume is set
to zero. The small numerals “1” and “2”
show which line(s) have ringer volume
set to zero.
D L1 and L2 in Main Display Area
L1 is for Line 1 and L2 is for Line 2.
These icons blink when the line is
receiving a call.
They are steady on when:
• The line is off-hook.
• The line is in external talk mode.
• Viewing call log of the line.
• The line is in hold mode or in use by
handset.
• The line is set to Call barring on.
E Soft keys
Soft key 1 is activated by the Select/OK
key. Soft key 2 is activated by the Back/
Clear key.
F Answering Machine Counters
22
Displays
steady on when the
answering machine of the line is set to
off.
Displays “AA” steady on when the
answering machine of the line is in
handset remote control mode or auto
answering mode.
G Message Counter
Shows the number of the messages in
answering machine for the line. Blinks
when there are new messages.
The
icon comes on when
message memory of the line is full, but
only when there are no new messages.
H L1 and L2 in the Sub-screen
Display Area
L1 is for Line 1 and L2 is for Line 2.
These icons appear at all times.
6
Conventions Used
in this Manual
This manual uses the following
conventions.
• Bold text
Bold text is used for messages and
instructions that are shown on the
handset or base display screen.
• Handset and Base Station Keys
Except where indicated otherwise, basic
operation is the same for both the
handset and base station of this product.
However, for some functions the keys
Conventions Used in this Manual
used on the handset and base station
have different shapes or different
lettering.
The procedures in this manual use the
handset key icons. This table shows the
corresponding keys for the base station.
Refer to it when needed.
Key on
Key on
Handset
Base Station
u
u
d
d
Left c key
o
Right c key
c
i
i
*
*
#
#
These keys are used to access the main
menu and utilize functions such as redial
and caller ID.
For details, see 5.2 and 5.4.
• Terminology
When a procedure applies equally to the
handset and the base station, the word
“unit” is used to indicate both.
• Scrolling
“Scroll n” means to use the u and d
keys on the handset or the u and d
keys on the base station to scroll
through a menu or list on the display
screen.
Note: See Section 5 for detailed
descriptions of the functions and use of
the keys of the handset and base station.
Getting started
7
Getting started
7.1
Connect the base station
1 Place the base station in a central
location near the telephone line
socket and electricity socket.
2 Connect the line cord(s) and the
power cable to their corresponding
connectors at the back of the base
station.
Note
For 2 line subscriptions, connect the 4-pin
telephone line cord (the black cord) to
the black TEL LINE 1/2 phone jack and to
the telephone wall jack for line 1.
Connect the second telephone line cord
(the gray cord) to the gray TEL LINE 2
phone jack and to the telephone wall jack
for line 2.
If the two phone lines are on one modular
wall jack, connect only the 4-pin
telephone line cord (the black cord) to
the black TEL LINE 1/2 phone jack and to
the telephone wall jack. (Do not connect
anything to the gray TEL LINE 2 phone
jack.)
3 Connect the other end of each of
the line cords to its socket.
23
4
Connect the power cable to the
power outlet.
The power adaptor and telephone line
cord(s) have to be connected correctly,
as incorrect connection could damage
the unit. Always use the telephone line
cord(s) supplied with the unit.
Otherwise, you may not get a dial tone.
7.2
Wall mounting the base
The base is designed to support wall
mounting. To wall mount the base,
follow the instructions below.
1 Attach the bracket to the base
station as shown below.
Note
Line adaptors may not be attached to the
line cords. In this case, you have to
connect line adaptors to the line cords
first before plugging the line cords into
the line sockets.
Warning
Avoid placing the base station too close
to large metal objects such as filing
cabinets, radiators or electrical
appliances. This can impair the range and
sound quality. Buildings with thick
internal and external walls may impair
transmission of signals to and from the
base.
Warning
Power is applied when the power
adaptor is plugged into the unit and
connected to the electricity socket. The
only way to power down the unit is to
unplug the power adaptor from the
electricity socket. Therefore, ensure that
the electricity socket is easily accessible.
24
2
Use the pedestal wall mounting to
plug your base station.
Getting started
2
5.20
Place the batteries in the correct
polarity as indicated and replace the
cover.
83.00
17.00
5.20
7.3
Install your phone
Before using the handset, the batteries
have to be installed and fully charged.
Warning
When the batteries are inserted for the
first time, the unit will not be able to
start normally due to the low battery.
You must charge the batteries on the
base station before you can use the
handset.
7.3.1 Install battery
Warning
Always use AAA rechargeable batteries
supplied with your unit. If alkaline
batteries are used instead of
rechargeable batteries, “Warning
Batt” will show on the display and the
battery icon will blink quickly.
1 Slide out the battery cover.
Getting started
7.3.2 Charge battery
Warning
The handset must be charged for at least
24 hours before using it for the first time.
When the battery level becomes low, the
low battery sensor warns you by blinking
the battery icon. If this occurs during a
conversation, an alert tone sounds to
inform you that the battery is low. If the
battery level becomes exceedingly low,
the phone automatically switches off
shortly after the icon starts blinking and
any function in progress will not be
saved.
1 Place the handset on the charging
cradle of the base station. A beep is
emitted if the handset is placed
correctly.
2 The battery icon
on the display
blinks during charge.
3 The battery icon
becomes steady
when the handset is fully charged.
Note
Optimal battery life is reached after 3
cycles of complete charging (over 15
25
hours) and discharging, allowing
approximately 12 hours of talk-time and
150 hours of stand-by time.
The indoor and outdoor range of the
phone is up to 50 metres and 300 metres
respectively. When the handset moves
beyond the operation range, the antenna
icon
will blink.
Tip
When you reach the range limit the
conversation may become crackly. Move
closer to the base.
Diameter: 2.5 mm
7.6
Power up
On the base, the screen below is shown
during power up.
Welcome
Please Wait...
7.4
Remove/Attach belt clip
A belt clip allows you to carry your
handset on your belt.
1 To remove the belt clip, simply pull
the clip away from the handset.
2 To attach the belt clip to your
handset, fit the tabs on the belt clip
into the slots at the back of the
handset and push into place.
TUE 00:01 AM
L1
3
01/01/2008
L2
0
The handset will start searching and the
backlight will turn on.
Handset screen
Searching...
7.5
Install optional headset
Your phone may be used with an
optional headset (not included in the
box). To use this feature, insert the
headset plug into the headset jack. Your
phone is ready for hands-free
conversations.
01/01
26
00:01
Getting started
The display will show the word
“Searching” and Antenna icon flashing
until it locks onto its subscribed base.
Then the display shows the standby
display.
7.7
Using multipacks
If you have purchased a multipack you
will have additional handsets, chargers,
power adaptors and AAA rechargeable
batteries.
1 Plug the chargers into a power
socket.
2 Install the batteries supplied into the
handsets.
3 Place the handsets on the chargers
to charge the batteries.
Getting started
27
7.8
Handset menu structure
The SE659 has six menus as shown in the following table.
Menu Name
Icon
1
Phonebook
2
Personal Settings
3
Clock and Alarm
4
Advanced Settings
5
Network Services
6
Answer Machine
Press the menu key m to enter menu mode. Use navigation keys n to navigate within
the menus and all submenus.
Press o Select to enter the next lower menu level. Press c Back to go to the
previous menu level.
The charts below show the menu trees of your phone.
Phonebook
Phonebook
28
New Entry
List
Edit Entry
Select Melody
(Handset only)
Delete
Delete All
Direct Memory
Enter Name:
Entry list displayed
Enter Number:
Entry list displayed
Melody details
for selected entry
Delete?
Entry list displayed
Delete All?
Key list and status
List of melodies
Edit
Delete
Getting started
Personal Settings
Personal Set
Handset Name
(Handset only)
Handset Tones
or Base Tones
Enter name
Ring Volume
(Handset only)
Line 1
Line 2
Ring Tones
Line 1
Line 2
Key Beep
Language
Wallpaper
(Handset only)
Color Theme
(Handset only)
Contrast
Backlight Time
(Handset only)
Auto Hang-up
(Handset only)
Line Setting
(Base station only)
Getting started
No bar (off)
One bar
…
Five bars
Progressive
No bar (off)
One bar
…
Five bars
Progressive
(Handset)
Name of tones 1
…
Name of tones 15
(Base station)
Name of tones 1
…
Name of tones 5
(Handset)
Name of tones 1
…
Name of tones 15
(Base station)
Name of tones 1
…
Name of tones 5
On
Off
List of languages
Wallpaper 1
Wallpaper 2
Wallpaper 3
Wallpaper off
Color 1
…
Color 4
Level 1
…
Level 5
20 Seconds
40 Seconds
60 Seconds
On
Off
Auto
Line 1
Line 2
29
Clock and Alarm
Clock & Alarm
(Handset)
Set Date/Time
Set Format
or
Clock (Base station)
30
Enter date & time
Time Format
Date Format
Alarm
(Handset only)
Off
On Once
On Daily
Alarm Tone
(Handset only)
Melody 1
Melody 2
Melody 3
12 Hours
24 Hours
DD/MM
MM/DD
Getting started
Advanced Settings (Handset only)
Advanced Set
Easy Call
Mode
On
Number
Off (by default)
Enter number
(Handset only)
Conference
On (by default)
Off
Call Barring
Line1
Line2
Enter PIN
Enter Number:
Mode
On
Number
Off (by default)
Number 1
…
Number 4
XHD Sound
Change PIN
Register
Unregister
Reset
Area Code
Auto Prefix
Flash Time
Dial Mode
First Ring
Line Setting
On (by default)
Off
Reset?
Line1
Line2
Line1
Line2
Line 1
Line 2
Line 1
Line 2
Enter number
Detect Digit:
Prefix
Short
Long
Tone
Pulse
On
Off
Auto
Line 1
Line 2
Getting started
31
Network Services (Handset only)
Netw. Services
(Handset only)
Line 1
Line 2
Voicemail
Call
Settings
Enter Number
Answer Machine
Answer
Machine
Play
(Handset only)
Line 1
Line 2
Repeat
Next
Previous
Delete
Delete All
Line 1
(Handset only)
Answer On/Off
(Handset only)
Line 2
Line 1
Line 2
Record OGM
Line 1
Line 2
On
Off
Answer & Rec.
Record Message
Answer Only
Answer
Mode
Settings
Line 1
Line 2
Ring Delay
Play
Answer & Rec.
Answer Only
Line 1
Line 2
Delete
Play
Record Message
Delete
3 Rings
4 Rings
5 Rings
6 Rings
7 Rings
8 Rings
Economy
Remote Access
Activate
Deactivate
(by default)
HS Screening
(Handset only)
Voice Language
On
Off (by default)
Line 1
List of languages
Line 2
32
Getting started
8
Using your phone
8.1
Make a call
8.1.1 Predialling
1 Enter the number. (A maximum of
24 digits including * and # are
allowed. Press c Clear to delete
the last digit. Or long press to
delete all.)
2 From the handset: Press t. The
line selection menu appears and the
default line is highlighted. If you
want to switch to the other line,
scroll n. To start the call, press t
or o Select (or press l to start
in speaker mode).
• The call is initiated on the
highlighted line.
From the base: Press l to call
from the default line. When Auto is
selected as the line setting, the base
will automatically select a free line.
To call from a particular line, press
[ or ].
• The call is initiated.
Note
For the line setting on the base station,
see section 12.9.
8.1.2 Direct dialling
1 From the handset: Pick up the
handset. To call from the default
line, press t (or press l to start a
call in speaker mode). To call from a
Using your phone
particular line, press o Line 1 or
c Line 2.
From the base: Press l to call
from the default line. To call from a
particular line, press [ or ].
2 Dial the number.
• The call is initiated.
Note
If Auto is selected as the line setting, the
phone will automatically select a free line
when you press t or l on the handset
or l on the base. For the line setting,
see section 13.14 for the handset and
section 12.9 for the base station.
8.1.3 Call from redial list
1 Press r in idle mode.
2 Scroll n to an entry in the redial
list.
3 From the handset: Press t. The
line selection menu appears and the
default line is highlighted. If you
want to switch to the other line,
scroll n. To start the call, press t
or o Select (or press l to start
in speaker mode).
• The call is initiated on the
highlighted line.
From the base: Press l to call
from the default line. When Auto is
selected as the line setting, the base
will automatically select a free line.
To call from a particular line, press
[ or ].
• The call is initiated.
Note
The handset(s) and base station each
have their own redial list.
33
8.1.4 Call from the call log
Note
• The call log is shared between
handset(s) and the base station.
• You need to subscribe to Caller Line
Identification service to be able to see
the caller's number or name in the call
log. See section 11.1 - “Access the
Call log”.
1 Press u in idle mode.
Note
If the list is already empty, then “List
Empty” is displayed.
2 Scroll n to an entry in the call list.
3 From the handset: Press t. The
line selection menu appears and the
default line is highlighted. If you
want to switch to the other line,
scroll n. To start the call, press t
or o Select (or press l to start
in speaker mode).
• The call is initiated on the
highlighted line.
From the base: Press l to call
from the default line. When Auto is
selected as the line setting, the base
will automatically select a free line.
To call from a particular line, press
[ or ].
• The call is initiated.
Note
For the line setting on the base station,
see section 12.9.
8.1.5 Call from the phonebook
1 Press d in idle mode.
2 Scroll n to a phonebook entry.
34
From the handset: Press t. The
line selection menu appears and the
default line is highlighted. If you
want to switch to the other line,
scroll n. To start the call, press t
or o Select (or press l to start
in speaker mode).
• The call is initiated on the
highlighted line.
From the base: Press l to call
from the default line. When Auto is
selected as the line setting, the base
will automatically select a free line.
To call from a particular line, press
[ or ].
• The call is initiated.
Note
For the line setting on the base station,
see section 12.9.
3
8.1.6 Call from the phonebook
while already on the phone
1 While on the phone, press Option
soft key and then o Select to
enter the phonebook name list.
2 Scroll n to a phonebook entry.
3 From the handset: To call from the
default line, press t (or press l to
start a call in speaker mode). To call
from a particular line, press o Line
1 or c Line 2.
From the base: Press l to call
from the default line. To call from a
particular line, press [ or ].
Note
If Auto is selected as the line setting, the
phone will automatically select a free line
when you press t or l on the handset
Using your phone
or l on the base. For the line setting,
see section 13.14 for the handset and
section 12.9 for the base station.
8.1.7 Call using Direct Access
Memory
Press a number key 3 to 9 for more
than 2 seconds. This invites you to select
a line, then dials a stored direct access
memory number on the desired line.
Note
• The handset(s) and base station each
have their own direct access
memories.
• See section 10.7 for instructions on
how to store, edit, and delete direct
access memory numbers.
8.1.8 Enter a Dialing Pause
Long press key # to enter a pause in the
dialling sequence. The pause is indicated
by a P.
8.2
Answer a call
Danger
When the handset rings during an
incoming call, please do not hold the
handset too close to your ear as the
volume of the ringing tone may damage
your hearing.
When the phone rings, the L1 (or L2)
indicator and L1 CALL (or L2 CALL)
icon appear to indicate the incoming call
line. To answer, press the appropriate
soft key on the handset (o Line 1 or c
Using your phone
Line 2), or [/] on the base
station.)
• The call is established.
Note
• When Auto is selected as the line
setting, you can accept incoming calls
on either line by pressing t or l on
the handset, or l on the base
station. When Line 1 or Line 2 is
selected as the line setting, you can
use these keys to accept calls on the
selected line, but you must use the
Line 1 or Line 2 soft keys on the
handset or [/] on the base
station to accept calls on the other
line.
• Incoming call has priority over other
events. Whenever there is an
incoming call, other status in progress
such as phone setting, menu
navigation, etc will be aborted.
8.2.1 Handsfree answering with
handset
Danger
Handsfree activation can suddenly
increase the volume in the earpiece to a
very high level. Make sure the handset is
not too close to your ear.
When the phone rings, and current
default line is the incoming call line, press
l on the handset.
• The loudspeaker is activated on the
handset.
35
8.3
Answer a call on the other
line
You can put the current call on hold and
accept an incoming call on the other line.
1 When there is a incoming call from
the other line, the earpiece will emit
a beep tone to inform you; press
the other line key on the handset.
• The call is established on the
second line.
2 To switch back to the first caller,
either hang up the second line, or
place it on hold and press the first
line key to resume talking with the
first caller.
8.4
End a call
To end a conversation, press h on the
handset or l key on the base.
• The call ends.
Tip
When auto hang-up is on, you can simply
place the handset back to its base station
or charger to end the call. This feature is
activated by default.
Note
The call duration (MM:SS) will be
displayed on the handset screen for
about 5 seconds.
8.5
Using the Redial list
The redial list stores the last 10 numbers
dialed. A maximum of 32 digits can be
displayed for each entry.
36
8.5.1 Access Redial list
1 Press r to go to the redial list and
scroll n to browse the redial list.
• The last number dialed will
appear first in the redial list. If
the redial number matches a
phonebook entry, the name will
be displayed instead.
2 To open the redial list options,
press o Menu.
Note
Press c Back to return to the previous
menu.
8.5.2 View redial number details
1 Press r in idle mode, scroll n to
select an entry and press o Menu.
2 View is highlighted on the screen;
press o Select to display
information about the number
dialed.
3 Press o Next to display further
information. Afterward, you can
press o Prev. to return to the
former screen. After viewing, press
c Back to return to previous
menu levels.
8.5.3 Save a redial number into
the phonebook
1 Press r in idle mode, scroll n to
select an entry and press o Menu.
2 View is highlighted on the screen.
Scroll n to Save Number and
press o Select.
Using your phone
3
Enter Name is displayed. Enter
the name of the contact (maximum
14 characters) and press o OK.
4 Enter Number is displayed and
the selected number from the redial
list appears in the number field. At
this time you can edit the number if
you wish to.
5 Press o OK. The screen returns
to the redial list.
Note
Press c Clear to delete the last digit or
character entered. Long press c Clear
to clear the entire entry.
8.5.4 Delete a redial number
1 Press r in idle mode, scroll n to
select an entry and press o Menu.
2 Scroll n to Delete and press o
Select.
3 Delete? is displayed on the screen.
4 Press o OK to confirm deletion.
• A validation tone is emitted.
Note
Press c Back to discard the deletion.
The screen returns to the redial list.
8.5.5 Delete all redial numbers
1 Press r in idle mode, and press o
Menu
2 Scroll n to Delete All and press
o Select.
3 Delete All? is displayed on the
screen.
4 Press o OK to confirm deletion.
• A validation tone is emitted.
Using your phone
37
9
Use more of your
phone
9.1
Switch the handset off/on
To switch the handset off, press and hold
h in idle mode for at least 5 seconds.
To switch it on, press and hold h for at
least one second.
9.2
Handset keypad lock/unlock
Press and hold * for 3 seconds to lock/
unlock the keypad in idle mode.
9.3
Text or number entry
When you select a field in which you can
enter text, you can enter the letters that
are printed on the keys by pressing the
relevant key once or several times. For
example, to enter the name “PAUL”:
1 Press 7 once: P
2 Press 2 once: PA
3 Press 8 twice: PAU
4 Press 5 three times: PAUL
The table below gives you the character
assignment during text or number entry:
Keys
Assigned characters
.0,/:; “‘!¡?¿*+-%\^
0
~|
SPACE 1 @ _ # = < > ( ) &
1
€ £ $ ¥ [ ] { } ¤ § ...
abc2àâæáãäåç
2
def3èéêëΔΦ
3
ghi4ğíìïıΓ
4
jkl5Λ
5
38
Keys
Assigned characters
mno6ñóôõöò
6
pqrs7ßşΠΘΣ
7
tuv8ùúüμ
8
wxyz9øΩΞΨ
9
Tip
• Press c Clear to delete the last digit
or character entered or long press to
delete all.
• Short press # to shift between
lowercase and uppercase.
• Long press # to insert a pause.
9.4
Call waiting
If you have subscribed to Call Waiting
services, the earpiece will emit a beep
tone to inform you that there is a second
incoming call on the line you are
currently using. The number or name of
the second caller will also be displayed if
you have subscribed to Caller Line
Identification service (CLI). Please
contact your network provider for more
information on this service.
To hold the call in progress and answer
the new call:
• From the handset, press o Accept
or t.
• From the base station, press
c Accept or t.
9.5
Call in progress
Some options are available to you during
a call. The available options are :
Use more of your phone
9.5.1 Adjust earpiece or speaker
volume
1
2
9.5.1.1
Earpiece or Speaker
volume in handset
During a call, press u and d to select
the volume level.
• The earpiece/speaker volume will be
displayed as volume bar (level 1 to 5).
The selected volume is saved for the
next call.
9.5.1.2 Speaker volume in base
During a call, press + and - to
select the volume level.
• The speaker volume will be displayed
as volume bar (level 1 to 5). The
selected volume is saved for the next
call.
9.5.2 Mute/Unmute microphone
When the microphone is muted, your
correspondent cannot hear you.
1 During a call, press s to turn off
the microphone.
2 Press s again to turn on the
microphone.
9.5.3 Activate/Deactivate handset
loudspeaker mode
Danger
Handsfree activation can suddenly
increase the volume in the earpiece to a
very high level. Make sure the handset is
not too close to your ear.
Use more of your phone
During a call, press l on the
handset to activate the loudspeaker
mode.
Press l again to return to
deactivate the loudspeaker mode.
9.6
Chain dialing
This feature allows you to dial an
extension to a number already saved in
the phonebook during a call.
1 Press t or l on the handset, or
press l on the base to take the
default line. Then press Option soft
key and o Select to enter the
phonebook list.
2 Scroll n to a phonebook entry.
3 Press o Select.
• The first part is dialed.
4 Enter the extension.
9.7
Using the Intercom
The intercom feature allows you to make
free internal calls, transfer external calls
from one unit to another and use the
conference option.
9.7.1 Intercom another unit
Note
If the handset does not belong to this
model’s series, this function may not be
available.
1 Press i in idle mode.
• Intercom between the base and
the handset is established
immediately if there is only one
handset registered to the base.
39
2
If there is more than 1 registered
handset, scroll n to select the unit
to call and press o Select.
• Once the intercom call is
initiated the
icon is displayed
on the handset.
3 Press t to answer an intercom call
on the called handset, or l to
answer on the base.
• The intercom is established.
Note
Pressing h on any handset or l on
the base will exit intercom mode and
return other units to idle mode. If an
external call arrives during intercom
mode and you want to accept this call,
you must first exit intercom mode.
9.7.2 Transfer an external call to
another unit
1 During the call, press i to put the
external call on hold (the caller can
no longer hear you).
• The display shows the numbers
of the handsets registered to the
base and the base as well if you
are looking at the display on a
handset.
2 Scroll n to the unit you wish to
transfer your external call to and
press o Select.
3 Press t on the called unit to
answer the internal call, where both
internal callers can talk.
• Intercom is established.
4 Press h on the first unit to transfer
the external call to the called
handset.
40
• The external call is transferred.
Note
If there is no answer from the called unit,
press i to resume the external call.
9.7.3 Answer an external call
during intercom
1 During intercom, a new call tone is
emitted when there is an incoming
external call.
2 Press h (l on the base) to exit
intercom mode.
3 To pick up the external call, press
o Line 1 / c Line 2 on the
handset or [/] on the base
station.
9.7.4 Switch between an internal
and external call
During the call, press i to switch
between an internal or external call.
9.7.5 Establish a three-party
conference call
The conference call feature allows an
external call to be shared with two
handsets, one handset and another
external call, or one handset and the
base. The three parties can share the
conversation and no network
subscription is required.
Use more of your phone
9.7.5.1
1
2
3
4
Conferencing between
two internal units and an
external line
During the call, press i to put the
external call on hold (the caller can
no longer hear you).
• The display shows the numbers
of available units (base or
handsets).
Scroll n to the number of the unit
you wish to establish the
conference call with and press o
Select.
Press t on the called handset or
l on the base to answer the
internal call, where both internal
callers can talk.
• Intercom is established.
Press Conf. soft key or long press
i on the first unit to start the
three party conference.
• Conference will be displayed
on the screen once the
conference call is established.
9.7.5.2
1
2
Conferencing between
one internal unit and two
external lines
During a call, press the line key
(Line 1 or Line 2 soft key on the
handset, or [ or ] on the base
station) for a free line to make or
answer a second external call and
put the first external call on hold
(the caller can no longer hear you).
When the second call is connected,
press Option soft key, scroll n to
Use more of your phone
3
Conference, and press o Select
to initiate the conference call.
• Conference will be displayed on
the screen once the conference
call is established.
To disconnect a single caller, press
the corresponding line key (Line 1
or Line 2 soft key on the handset,
or [ or ] on the base station)
to place the caller you wish to keep
speaking to on hold, and then press
h key on the handset or l on
the base to hang up the other caller.
Then press the other line soft key
to take the remaining call off hold
and continue the conversation.
To hang up both lines, press h key on
the handset or l on the base station.
9.8
Locate Handset
This feature enables you to locate a
missing handset if the handset is in range
and contains charged batteries.
1 Press a on the base station.
• All the registered handsets start
to ring.
• Once a handset is found, press
c Silent on a handset to stop
its ringing.
2 Press a again to end the paging.
Note
If there are no key presses within 30
seconds, the handset and base station
will automatically return to idle mode.
41
9.9
Clock and Alarm settings
This feature allows you to set the date,
time and alarm settings for your phone.
Note
The alarm feature is available only on the
handset.
The procedures in this section refer you
to the Clock & Alarm menu. However
if you access this menu from the base
station, the menu name is “Clock”.
9.9.1 Set Date and Time
1 Press m in idle mode, scroll n to
Clock & Alarm (Clock on the
base), and press o Select.
2 Set Date/Time is highlighted.
Press o Select.
3 The last stored date and time are
displayed. Enter the current time
and current date (HH:MM DD/MM/
YY). Press u to move the cursor
left, or press d to move it right.
If using the 12 hour format, just
after setting the minutes, use * to
switch between AM and PM.
4 Press o OK.
• A validation tone is emitted and
the screen returns to the idle
mode.
Note
You can change the format as shown in
the next section.
9.9.2 Set Time and Date Format
9.9.2.1 Set Time Format
1 Press m in idle mode, scroll n to
Clock & Alarm (Clock on the
base), and press o Select.
2 Scroll n to Set Format and press
o Select.
3 Time Format is highlighted in the
display. Press o Select, then scroll
n to select 12Hours or 24Hours.
4 Press o Select to select the
option.
• A validation tone is emitted and
the screen returns to the Set
Format menu.
9.9.2.2 Set Date Format
1 Press m in idle mode, scroll n to
Clock & Alarm (Clock on the
base), and press o Select.
2 Scroll n to Set Format and press
o Select.
3 Scroll n to Date Format and
press o Select.
4 Scroll n to select DD/MM or MM/
DD and press o Select to select
the option.
• A validation tone is emitted and
the screen returns to the Set
Format menu.
9.9.3 Set Alarm (Handset only)
1 Press m in idle mode, scroll n to
Clock & Alarm, and press o
Select.
42
Use more of your phone
Scroll n to Alarm and press o
Select.
3 Scroll n to Off, On Once, or On
Daily and press o Select.
4 If you select On Once or On
Daily, enter the time (HH-MM) for
the alarm. (If using the 12 hour
format, you can switch between AM
and PM by pressing * key.) Press
o OK to confirm.
• A validation tone is emitted and
the screen returns to the Alarm
menu. And the alarm icon
is
displayed.
• If you select Off, a validation
tone is emitted and the screen
returns to the Clock & Alarm
menu.
Note
The alarm tone and alarm icon will
sound/blink for 1 minute when the alarm
time is reached. To mute the alarm tone,
simply press any key on the handset.
2
9.9.4 Set Alarm Tone (Handset
only)
1 Press m in idle mode, scroll n to
Clock & Alarm, and press o
Select.
2 Scroll n to Alarm Tone and press
o Select.
3 Scroll n to select the tone. (Three
tones are available. The tones sound
as you scroll.) Press o Select to
confirm your selection.
• A validation tone is emitted and
the screen returns to the Clock
& Alarm menu.
Using your Phonebook
10 Using your
Phonebook
Your phone can store up to 200
phonebook entries. Each phonebook
entry can have a maximum of 24 digits
for the phone number and 14 characters
for the name.
All names and numbers in the
phonebook must be unique.
Note
Only one unit (handset or base station)
can access the phonebook at a time.
10.1
Store a contact in the
phonebook
1 Press m in idle mode. Phonebook
is highlighted. Press o Select.
2 New Entry is highlighted. Press o
Select.
3 Enter Name is displayed. Enter
the name of the contact (maximum
14 characters) and press o OK.
4 Enter Number is displayed. Enter
the number (maximum 24 digits)
and press o OK.
• A validation tone is emitted.
Note
• Press c Clear to delete the last digit
or character entered or long press to
delete all.
• To return to the previous menu,
press c Back.
43
Tip
You cannot store a new phonebook
entry when the memory is full. In this
case, you have to delete existing entries
to make space for new entries.
10.2 Access phonebook
1 Press d in idle mode and scroll n
to browse the phonebook. (You can
also access the phonebook through
the menu mode. m ➝ Phonebook
➝ List)
• The phonebook entries will be
listed in alphabetical order.
2 To view the details, press o View.
Tip
Instead of scrolling n to browse the
phonebook entries, you can press the
numeric key corresponding to the first
letter of the entry you wish to locate.
For example, pressing 2 will show the
entries starting with A. Pressing 2 again
will show the entries starting with B, etc.
3 Press t (or l on the base
station) to dial the number. To
return to idle mode press h (or
l on the base station).
10.3 Modify a phonebook entry
1 Press m in idle mode. Phonebook
is highlighted. Press o Select.
2 Scroll n to Edit Entry and press
o Select.
3 Scroll n to select an entry to edit.
4 Press o Select to display the
name.
44
Press c Clear to erase the letters
one by one.
6 Edit the name and press o OK to
confirm.
7 Edit the number and press o OK
to confirm.
• A validation tone is emitted.
Note
While editing, press c Clear to delete
the last digit or character entered or
long press to delete all.
5
10.4
Select phonebook melody
(Handset only)
With this function you can personalize
the melody played when someone in the
phonebook calls you.
Note
You need to subscribe to Caller Line
Identification service to be able to benefit
from this feature.
1 Press m in idle mode. Phonebook
is highlighted. Press o Select.
2 Scroll n to Select Melody and
press o Select.
3 Scroll n to the entry you want to
select a melody for, then press o
View.
4 The screen shows the melody
currently selected for that entry.
Press o Change to change the
melody.
5 Scroll n the list of melodies. (There
are 15 melodies plus No Melody
to choose from. The melodies play
as you scroll through them.)
6 Press o Select to select the
melody you prefer.
Using your Phonebook
• A validation tone is emitted and
the screen returns to the
Phonebook menu.
Note
When first ring detection is set On, a
normal tone sounds first, then it changes
to the personalized phonebook melody.
When it is set Off, the personalized
phonebook melody plays from the start.
See Section 13.13 for how to set first
ring detection On or Off.
10.5 Delete a phonebook entry
1 Press m in idle mode. Phonebook
is highlighted. Press o Select.
2 Scroll n to Delete and press o
Select.
3 Scroll n to select an entry to delete
and press o Select.
4 Delete? is displayed on the screen.
Press o OK to confirm deletion.
• A validation tone is emitted.
Note
Press c Back to discard the deletion.
The screen returns to the phonebook
list.
10.6 Delete all phonebook entries
1 Press m in idle mode. Phonebook
is highlighted. Press o Select.
2 Scroll n to Delete All and press
o Select.
3 Delete All? is displayed on the
screen. Press o OK to confirm
deletion.
• A validation tone is emitted.
Using your Phonebook
10.7 Direct Access Memory
There are 7 direct access memories
(corresponding to keys 3 to 9)
included in the phonebook. A long press
on any of these keys in idle mode invites
you to select a line, then dials the phone
number stored in the corresponding
direct access memory.
Note
Key 1 is reserved for use with
Voicemail in the network services menu.
If you subscribe to this service, this
allows you to dial your voice mail access
number using key 1.
10.7.1 Add/Edit Direct Access
Memory
1 Press m in idle mode. Phonebook
is highlighted. Press o Select.
2 Scroll n to Direct Memory and
press o Select.
3 Handset: Scroll n to the key you
wish to edit (Key 3 to Key 9) and
press o Select.
Base: Scroll u or d to the key
you wish to edit (Key 3 to Key 9)
and press Select soft key.
• The current number stored in
the direct access memory
location will be displayed. If no
number is stored, No number
will be displayed.
4 Press o Menu. Edit is highlighted;
press o Select.
5 The Phonebook list will be
displayed. Scroll n to the
Phonebook entry you wish to store
in the selected direct access
45
6
memory number and press o
Select.
Press o OK to confirm.
• A validation tone is emitted and
the screen returns to the
previous menu.
10.7.2 Delete Direct Access
Memory
1 Press m in idle mode. Phonebook
is highlighted. Press o Select.
2 Scroll n to Direct Memory and
press o Select.
3 Handset: Scroll n to the key you
wish to delete the memory from.
Base: Scroll u or d to the key
you wish to delete the memory
from and press o Select.
4 Press o Menu, and then scroll n
to Delete and press o Select.
• A validation tone is emitted and
the screen returns to the
previous menu.
11 Using the Call log
The call log stores the last 50 external
calls and any new voice mail received. In
idle mode, New Call(s) appears on the
handset or base display for new and
unanswered calls. If you have subscribed
to Caller Line Identification (CLI), and
provided the identity of the caller is not
46
withheld, the name (or number) of the
caller will be displayed.
During CLI display, you can press * to
toggle area code and long distance code
display on/off.
Note
If the identity of the caller is withheld,
then the information will not be
displayed in the call log. If you have not
subscribed to Caller Line Identification
service, there will not be any caller
information displayed in the call log.
11.1 Access the Call log
1 Press u in idle mode, and scroll n
to browse the call log.
• The calls (missed and received)
are displayed in chronological
order with the most recent call
at the top of the list. L1 or L2
indicates the line on which the
call was received. If the call is
unviewed and unanswered, New
appears on the display. After you
view the message, New
disappears.
• Press t to dial out the number
of the selected call log entry.
2 To view the call details, press o
Menu and then press o Select.
The display shows the caller
information.
• Press c Back at any time to
return to the previous menu.
Using the Call log
11.1.1 To choose the format for call
log display
You must choose the correct format to
dial the area code and number of the call
log record chosen. The original incoming
number from the call log will appear as a
7, 10 or 11-digit number.
1 When viewing the call log, press *
to change the format of the call log
display as it should be dialed from
your location. For example, if the
call log entry appears as “234-5678900”:
• Press * once to display “1-234567-8900”
• Press * twice to display “5678900”
• Press * 3 times to display “1567-8900”
• Press * 4 times to display “234567-8900” again.
2 To dial the current displayed
number, press t (or l on the
base station).
• The call is initiated.
Note
You need to subscribe to Caller Line
Identification service to be able to see
the caller’s number or name in the call
log (see section 11.1 - “Access the Call
log”).
When you store an incoming number in
the phonebook, the digits of the number
will be saved exactly as they appear on
the screen.
If the first 3 digits of the incoming
number corresponds to the local area
code set in your phone, they will be
filtered automatically when you press the
Using the Call log
t or l on the handset (or l on the
base station) to dial. To change the local
area code, see section 13.9 - “Set Area
Code.”
11.2
Save call list entry into the
phonebook
1 Press u in idle mode, then scroll n
to select an entry and press o
Menu.
2 Scroll n to Save Number and
press o Select.
3 Enter Name is displayed on the
screen. Enter the name of the
contact (maximum 14 characters)
and press o OK.
4 Enter Number is displayed and
the selected number from the call
list appears in the number field. At
this time you can edit the number if
you wish to.
5 Press o OK.
• A confirmation tone sounds and
the screen returns to call log.
Note
Press c Clear to delete the last digit or
character entered or long press to delete
all.
11.3 Delete a call list entry
1 Press u in idle mode, then scroll n
to select an entry and press o
Menu.
2 Scroll n to Delete and press o
Select.
3 Delete? is displayed on the screen.
Press o OK to confirm deletion.
47
• A validation tone is emitted, the
call list entry is deleted, and the
display goes to the next entry in
the call list.
Note
Press c Back to discard the deletion.
The screen returns to the Call List
menu.
11.4 Delete all call list entries
1 Press u in idle mode, then press
o Menu.
2 Scroll n to Delete All and press
o Select.
3 Delete All? is displayed on the
screen. Press o OK to confirm
deletion.
• A validation tone is emitted. The
display shows List Empty for 2
seconds and returns to the idle
mode.
12 Personal settings
Change the Handset Name
(Handset only)
You can name the handset and display
the handset name in idle mode. The
default handset name of your handset is
Philips.
1 Press m in idle mode, scroll n to
Personal Set and press o Select.
2 Handset Name is highlighted.
Press o Select.
3
4
12.2
The last stored name is displayed.
Press c Clear to delete the
characters one by one or a long
press to delete all.
Enter the new name and press o
OK to confirm.
• A validation tone is emitted and
the screen returns to the
Personal Set menu.
Ring Settings
12.2.1 Set the Ring Volume
Danger
When the handset rings during an
incoming call, please do not hold the
handset too close to your ear as the
volume of the ringing tone may damage
your hearing.
You can set the ring volume
independently for each registered
handset, as well as the base station.
Handsets have 5 ringer volume levels,
plus progressive and off. The base station
has 5 ringer volume levels plus off. The
default setting for both handsets and the
base station is level 3.
12.1
48
To adjust ring volume on the
handset:
1 Press m in idle mode, scroll n to
Personal Set, and press o
Select.
2 Scroll n to Handset Tones and
press o Select. Ring Volume is
highlighted. Press o Select.
Personal settings
3
4
5
Scroll n to select Line 1 or Line 2
and press o Select.
Scroll n to your desired volume
level. The ring tone sounds at each
level.
Press o OK to confirm.
• A validation tone is emitted and
the screen returns to the
Handset Tones menu.
To adjust ring volume on the base
station:
1 Press + or - in idle mode;
Select line appears.
2 Press o Line 1 or c Line 2 to
select the line whose ring volume is
being adjusted.
3 Press + or - to adjust the ring
volume on the selected line.
Note
If ring volume is set to off, the
icon
will be displayed on the screen.
If ring volume is set to progressive
(handset only), the ringer will start at
level 1 and go up one level volume every
ring.
12.2.2 Set the Ring Tones
There are 15 ring tones available on your
handset, and 5 ring tones available for the
base.
1 Press m in idle mode, scroll n to
Personal Set, and press o
Select.
2 Scroll n to Handset Tones on the
handset or Base Tones on the
base and press o Select. Then
Personal settings
3
4
5
scroll n to Ring Tones and press
o Select.
Scroll n to select Line 1 or Line 2
and press o Select.
Scroll n to your desired melody.
The melodies will play as you scroll
them.
Press o Select to set the ring
tone.
• A validation tone is emitted and
the screen returns to the
previous menu.
12.2.3 Activate/Deactivate Key
Beep
A single beep tone is emitted when a key
is pressed. You can enable or disable the
key beep.
1 Press m in idle mode, scroll n to
Personal Set, and press o
Select.
2 Scroll n to Handset Tones on the
handset or to Base Tones on the
base and press o Select. Then
scroll n to Key Beep and press o
Select.
3 Scroll n to select On or Off and
press o Select to confirm.
• A validation tone is emitted and
the screen returns to the
previous menu.
12.3 Change the Display Language
Your handset and base can support
different display languages.
49
Press m in idle mode, scroll n to
Personal Set, and press o
Select.
2 Scroll n to Language and press o
Select.
3 Scroll n to your desired language
and press o Select to confirm.
• A validation tone is emitted and
the screen returns to the
Personal Set menu.
Note
Once the display language is set, the
option menus on the unit will
immediately switch to display in the
selected language.
1
Select the Display Wallpaper
(Handset only)
There are 3 wallpaper images available
on your handset as well as an option to
set it off.
1 Press m in idle mode, scroll n to
Personal Set, and press o
Select.
2 Scroll n to Wallpaper and press
o Select.
3 Scroll n to your desired wallpaper.
The image on the display will change
as you scroll.
4 Press o Select to confirm.
• A validation tone is emitted and
the screen returns to the
Personal Set menu.
12.5
Select the Color Theme
(Handset only)
There are 4 color themes available on
your handset.
1 Press m in idle mode, scroll n to
Personal Set, and press o
Select.
2 Scroll n to Color Theme and
press o Select.
3 Scroll n to your desired color
theme. The color theme used on
the display will change as you scroll.
4 Press o Select to confirm.
• A validation tone is emitted and
the screen returns to the
Personal Set menu.
12.4
50
12.6 Set the Display Contrast
You can change the contrast of the text
on the display. There are 5 contrast
levels available. The default is level 3.
1 Press m in idle mode, scroll n to
Personal Set, and press o
Select.
2 Scroll n to Contrast and press o
Select.
3 Scroll n to the desired display
contrast, and press o Select to
confirm.
• A validation tone is emitted and
the screen returns to the
Personal Set menu.
Personal settings
12.7
Set the Backlight Time
(Handset only)
You can change the backlight timing for
the display. There are 3 options available
- 20, 40, or 60 seconds.
1 Press m in idle mode, scroll n to
Personal Set, and press o
Select.
2 Scroll n to Backlight Time and
press o Select.
3 Scroll n to the desired backlight
time, and press o Select to
confirm.
• A validation tone is emitted and
the screen returns to the
Personal Set menu.
12.8
Deactivate/Activate Auto
Hang-Up (Handset only)
If auto hang-up is set to On, it will
automatically release the line when the
phone is put back on the cradle.
If auto Hang-up is set to Off, putting the
handset back on the cradle while in talk
mode will switch the handset to hands
free talk mode. This allows you to charge
the handset during calls.
The default setting for auto hang up is On.
1 Press m in idle mode, scroll n to
Personal Set, and press o
Select.
2 Scroll n to Auto Hang-up and
press o Select.
3 Scroll n to On or Off and press o
Select to confirm.
• A validation tone is emitted and
the screen returns to the
Personal Set menu.
Personal settings
12.9
Changing the Line Setting
(Base Station only)
Note
See section 13.14 for how to change the
line setting from the handset.
If you have two telephone lines
connected to the base unit, the line
setting determines how the lines are
selected when making or receiving calls.
When “auto” is selected as the line
setting, pressing l automatically
connects the line that is currently free
when making outgoing calls, or the line
that is ringing when receiving an
incoming call. (If both lines are in the
same state, line 1 takes priority.) If Auto
Conference is activated, pressing l
lets the base station join a conversation
between the external call on line 1 and
another unit.
If Line 1 or Line 2 is selected as default
and the corresponding line is free,
pressing l automatically connects to
that line when making outgoing calls, or
when receiving an incoming call on that
line. If Auto Conferenece is activated,
pressing l lets the base station join a
conversation on the selected line
between an external caller and another
unit.
1 Pressminidlemode,scrollu/d
to Personal Set and press Select
soft key.
2 Scroll u/d to Line Setting and
press Select soft key.
3 Scroll u/d to select Auto, Line
1, or Line 2 and press Select soft
key.
51
• A validation tone is emitted and
the screen returns to the
Personal Set menu.
13 Advanced settings
These settings can be made from any
registered SE659 handset. They cannot
be made from the base station.
13.1 Easy Call
When activated, this feature allows you
to dial a preset number by pressing any
key on the handset (except c Cancel).
This feature is useful for fast access to
emergency services.
13.1.1 Set Easy Call to On or Off
Follow this procedure to switch Easy
Call on. To switch Easy Call off, see the
Note at the end of this section.
1 Press m in idle mode, scroll n to
Advanced Set and press o
Select.
2 Easy Call is highlighted. Press o
Select to enter the Easy Call menu.
3 Mode is highlighted in the display.
Press o Select again to select
Mode, then scroll n to On.
4 Press o Select to confirm the
selection.
52
• If an Easy Call number has not
been set, you will be prompted
to input the Easy Call number.
• If an Easy call number has already
been set, the screen returns to
idle mode. If you want to edit the
number, press c Cancel and
scroll to Number and press o
Select, edit the new number
and press o OK.
Note
When you switch Easy Call on, Easy
Call On will be displayed on your screen
in standby mode. You can still answer
any incoming call as normal.
To switch Easy Call off from idle mode,
press c Cancel. Mode is highlighted in
the display. Press o Select again to
select Mode, and then scroll n to Off.
Press o Select to confirm.
13.1.2 Set Easy Call number
1 Press m in idle mode, scroll n to
Advanced Set and press o
Select.
2 Easy Call is highlighted in the
display. Press o Select to enter
the Easy Call menu.
3 Mode is highlighted in the display.
Scroll n to Number and press o
Select.
4 Input the Easy Call number.
5 Press o OK to confirm.
• A validation tone is emitted and
the screen returns to the Easy
Call menu.
Advanced settings
13.2 Auto Conference
If activated, this feature allows another
handset to join a conversation with an
external call by simply pressing t. The
default setting is On.
1 Press m in idle mode, scroll n to
Advanced Set and press o
Select.
2 Scroll n to Conference and press
o Select.
3 Scroll n to select On or Off and
press o Select to confirm.
• A validation tone is emitted and
the screen returns to the
Advanced Set menu.
13.3 Call Barring
If activated, this function prevents dialing
out to numbers beginning with
designated barring numbers. This is
useful for preventing outgoing long
distance calls or calls to specific prefixes.
You can store up to four numbers, each
with up to 4 digits.
Note
If you switch call barring on, Call Barr
On is displayed on the screen in idle
mode. By default call barring is off.
13.3.1 Set Call Barring Mode
By default, Call Barring is OFF.
1 Press m in idle mode, scroll n to
Advanced Set and press o
Select.
2 Scroll n to Call Barring and press
o Select.
Advanced settings
Scroll n to select Line 1 or Line 2
and press o Select.
4 Enter the PIN number.
• If you enter and incorrect PIN
number, an error tone will sound
and “Wrong PIN!” will be
displayed. Then, the display will
return to idle screen.
5 Mode is highlighted in the display.
Press o Select.
6 Scroll n to select On or Off and
press o Select to confirm.
• If a Call Barring number has not
been set, you will be prompted
to input a Call Barring number.
Note
To switch Call Barring mode off again
from idle mode, press c Cancel and
enter the PIN number. Mode is
highlighted in the display. Press o
Select to select Mode, then scroll n to
Off and press o Select.
3
13.3.2 Set a Call Barring number
1 Press m in idle mode, scroll n to
Advanced Set and press o
Select.
2 Scroll n to Call Barring and press
o Select.
3 Scroll n to select Line 1 or Line 2
and press o Select.
4 Enter the PIN number.
5 Mode is highlighted in the display.
Scroll d to Number and press
o Select.
6 Scroll n to select a call barring
number location, and press o
Select to confirm.
53
7
Input the call barring number (up to
4 digits) and press o OK.
• A validation tone is emitted and
the screen returns to the Call
Barring menu.
13.4 XHD Sound
XHD (extra high definition) Sound can
increase voice quality when On. The
default setting is On.
To turn it off:
1 Press m in idle mode, scroll n to
Advanced Set and press o
Select.
2 Scroll n to XHD Sound and press
o Select.
3 Scroll n to select On or Off and
press o Select to confirm.
• A validation tone is emitted and
the screen returns to the
Advanced Set menu.
13.5 Change PIN
The PIN is used for setting call barring
numbers and registration/unregistration
of handsets. The default PIN number is
0000. This PIN is also used to protect
the settings of your handset. Your
handset will prompt you whenever the
PIN is required.
Note
The default PIN code is preset to 0000. If
you change this PIN code, keep the PIN
details in a safe place where you have
easy access to them. Do not lose the PIN
code.
54
Press m in idle mode, scroll n to
Advanced Set and press o
Select.
2 Scroll n to Change PIN and press
o Select.
3 Old PIN: will be displayed. Enter
the current PIN and press o OK.
• The PIN entered will be shown
as asterisks (*) on the screen.
• If you enter an incorrect PIN
number, an error tone will sound
and “Wrong PIN!” will be
displayed. Then, you will be
prompted to enter the current
PIN again.
4 New PIN: will be displayed. Enter
the new PIN and press o OK.
5 Confirm PIN: will be displayed.
Enter the new PIN again and press
o OK to confirm PIN change.
• A validation tone is emitted,
Saved! is displayed and the
screen returns to the
Advanced Set menu.
Tip
If you forget your PIN, you will need to
reset your phone to its default settings.
For more details, see section 13.8 “Reset Unit.”
1
13.6 Registration
If you wish to register an additional
handset or if you have inadvertently
unregistered your phone's handset and
want to re-register it, follow the
procedure described below. This is the
procedure for registering SE65 handsets.
Procedures may vary for other types of
Advanced settings
handsets. In this case, please refer to the
manufacturer of the handset. Additional
handsets must be registered to the base
station before you can use them. Up to 8
handsets can be registered to one base
station.The PIN is required before you
can register or unregister handsets.
Note
By default, the PIN is 0000.
13.6.1 Easy registration
1 Insert the unregistered handset in
the base station to automatically
begin registration.
2 Registering… is displayed on the
screen.
• Upon successful registration, a
validation tone is emitted and the
handset number (1 to 8) will be
assigned by the base
automatically.
Note
Easy registration is possible only when
the PIN has not been changed and is still
the default PIN, 0000.
13.6.2 Manual registration
1 On the base station, press and hold
a for 3 seconds. A beep sounds to
indicate that the base is ready to
accept registration.
Note
If no action is taken on the handset
within 90 seconds, the registration
procedure will be aborted. If this
happens, repeat from Step 1.
Advanced settings
2
3
4
On the handset, press m, scroll n to
Advanced Set and press o
Select.
Scroll n to Register and press o
Select.
Enter the PIN when prompted and
press o OK to confirm.
Registering… is displayed on the
screen.
• Upon successful registration, a
validation tone is emitted and the
handset number (1 to 8) will be
assigned by the base
automatically.
13.7 Unregister
1 Press m in idle mode, scroll n to
Advanced Set and press o
Select.
2 Scroll n to Unregister and press
o Select.
3 Enter the PIN when prompted and
press o OK to confirm.
4 Scroll n to select the handset
number to unregister and press o
Select. Press o OK to confirm.
• A validation tone is emitted to
indicate successful unregistration.
Note
You can only use a SE659 handset to
unregister a handset that does not
belong to the SE659 range.
55
13.8 Reset Unit
You can reset your phone to its default
settings with this feature. (see 13.15
“Default Settings”)
Caution
Upon reset, all your personal settings,
call log and redial list entries will be
deleted and the phone will return to its
default settings. However, your
phonebook will remain unchanged after
reset.
Note
You may have to configure your phone
once again.
1 Press m in idle mode, scroll n to
Advanced Set and press o
Select.
2 Scroll n to Reset and press o
Select.
3 Reset? is displayed on the screen.
Press o OK to confirm.
• A validation tone is emitted.
• The unit is reset to its default
settings. (See section 13.15
below.)
13.9 Set Area Code
This feature is useful when you have
subscribed to Caller Line Identification
service. It allows you to set an area code
in your phone. Once the local area code
is set, the phone automatically filters the
area code for all incoming calls, by
removing the area code for local calls
and retaining the area code for calls from
other areas.
If it is a local call, then only the phone
number of the caller is displayed during
56
an incoming call or when you call the
number from the call log. If it is a long
distance call, then both the area code
and phone number will be displayed in a
proper format to be dialed out directly
from the call log, or saved into the
phonebook.
Note
You can enter 3 digits for the area code.
You need to subscribe to Caller Line
Identification service to be able to see
the caller’s number or name in the call
log. See 8.1.4 “Call from the call log” for
details.
1 Press m in idle mode, scroll n to
Advanced Set and press o
Select.
2 Scroll n to Area Code and press
o Select.
3 Scroll n to select Line 1 or Line 2
and press o Select.
4 Area Code will appear in the
display. Input your area code and
press o OK to confirm.
• A validation tone is emitted and
the screen returns to the
Advanced Set menu.
13.10 Set Auto Prefix
This feature allows you to define a prefix
number to be added to the beginning of a
number during predialling (see
“Predialling” - section 8.1.1). You may
also use this feature to add a detect
string to match and replace the first few
digits of the number during predialing.
Advanced settings
You can enter up to a maximum of 5
digits for the detect string and 10 digits
for the auto prefix number.
1 Press m in idle mode, scroll n to
Advanced Set and press o
Select.
2 Scroll n to Auto Prefix and press
o Select.
3 Scroll n to select Line 1 or Line 2
and press o Select.
4 Detect Digit: is displayed on the
screen. Enter a detect string
number (maximum 5 digits) and
press o OK to confirm.
5 Prefix: is displayed on the screen.
Enter the prefix number (maximum
10 digits) and press o OK to
confirm.
• A validation tone is emitted and
the screen returns to the
Advanced Set menu.
Note
If no detect string (blank) is entered, the
prefix number will be automatically
added to the predial number after t is
pressed.
For numbers starting with *, # or P, the
prefix number will not be added to the
predial number after t is pressed.
13.11 Change Flash time
Flash time is the time delay by which the
line will be disconnected after you press
the t key. It can be set to short or long.
The default value is Long.
1 Press m in idle mode, scroll n to
Advanced Set, and press o
Select.
Advanced settings
Scroll n to Flash Time and press
o Select.
3 Scroll n to Short or Long and
press o Select to confirm.
• A validation tone is emitted and
the screen returns to the
Advanced Set menu.
Note
The use of your SE659 cannot be
guaranteed on all PABX.
2
13.12 Change the Dial Mode
The default value for dial mode that is
preset in your handset should be the
best suited for your subscribed network
and therefore you should not need to
change it.
1 Press m in idle mode, scroll n to
Advanced Set, and press o
Select.
2 Scroll n to Dial Mode and press
o Select.
3 Scroll n to select Line 1 or Line 2
and press o Select.
4 Scroll n to Tone or Pulse and
press o Select to confirm.
• A validation tone is emitted and
the screen returns to the
Advanced Set menu.
13.13 Set First Ring Detection
First ring detection allows the phone to
ring upon reception of the first ring
signal. It is recommended that you set
first ring detection Off if you subscribe
to caller line identification service.
(When using personalized phonebook
57
melodies, this will prevent a normal ring
tone from sounding before a melody
starts playing.) If you do not subscribe to
caller line identification service, it is
recommended that you set first ring
detection On. (See Section 10.4.)
1 Press m in idle mode, scroll n to
Advanced Set, and press o
Select.
2 Scroll n to First Ring and press o
Select.
3 Scroll n to select Line 1 or Line 2
and press o Select.
4 Scroll n to On or Off and press o
Select to confirm.
• A validation tone is emitted and
the screen returns to the
Advanced Set menu.
Note
The default setting for first ring detection
is On. The setting automatically switches
to Off when you receive a call containing
caller line identification. However, this
occurs only if you do not first manually
change the setting. (It does not change
automatically
if you manually change the first ring
setting even once.)
13.14 Changing the Line Setting
(Handset only)
Note
See section 12.9 for how to change the
line setting from the base station.
setting determines how the lines are
selected when making or receiving calls.
When “auto” is selected as the line
setting, pressing t or l automatically
connects the line that is currently free
when making outgoing calls, or the line
that is ringing when receiving an
incoming call. (If both lines are in the
same state, line 1 takes priority.) If Auto
Conference is activated, pressing t
lets the handset join a conversation
between the external call on line 1 and
another handset.
If Line 1 or Line 2 is selected as default
and the corresponding line is free,
pressing t or l automatically connects
to that line when making outgoing calls,
or when receiving an incoming call on
that line. If Auto Conference is
activated, pressing t or l lets the
handset join a conversation on the
selected line between an external caller
and another unit.
1 Press m in idle mode, scroll n to
Advanced Set and press o
Select.
2 Scroll n to Line Setting and press
o Select.
3 Scroll n to select Auto, Line 1, or
Line 2 and press o Select.
• A validation tone is emitted and
the screen returns to the
Advanced Set menu.
If you have two telephone lines
connected to the base unit, the line
58
Advanced settings
13.15 Default Settings
Parameter Default Value
Ring Volume Level 3
Ring Tone
Ring 1
Earpiece
Level 3
Volume
Speaker
Level 3
Volume
Key Beep
On
Display
English
Language
Wallpaper
Wallpaper 1
Color
Color 1
Theme
Display
Level 3
Contrast
Backlight
20 Seconds
Time
Auto Hang- On
Up
Handset
Philips
Name
Time/Date
MM/DD 12Hours
Format
Time/Date
00:00 01/01/2008
Set Alarm
Off
Alarm Tone Bell 2
Dial Mode
Tone
Flash Time
Long
PIN Code
0000
Call Barring Off
Call Barring Cleared
Number
XHD Sound On
Easy Call
Off
Easy Call
Cleared
Number
Auto Prefix Cleared
Set First Ring On
Network Service
Parameter
Line Setting
Phonebook
Memory
Redial
Memory
CLI Memory
Network
Service
Auto
Conference
Default Value
Auto
After a reset,
phonebook is
maintained as it was just
before the reset
Cleared
Cleared
Empty (no preset
numbers)
On
14 Network Service
The network service function provides a
convenient way for you to access some
network provider services. A
subscription is required in order to
benefit from this service. Contact your
network provider for details. Depending
on your subscribed network, this service
and menus described in this chapter may
not be available in your SE659.
This setting can be made from any
registered SE659 handset. It cannot be
made from the base station.
14.1 Voice Mail
Use this function to access your voice
mail account.
59
14.1.1 Access Voice Mail
1 Press m in idle mode, scroll n to
Netw. Services, and press o
Select.
2 Scroll n to select Line 1 or Line 2
and press o Select.
3 Scroll n to Voicemail and press
o Select.
4 You are now at the Voicemail
menu and Call is highlighted. Press
o Select to connect to the voice
mail account number.
Note
You can also access your voice mail
number by long-pressing 1.
14.1.2 Set Voice Mail Number
1 Press m in idle mode, scroll n to
Netw. Services, and press o
Select.
2 Scroll n to select Line 1 or Line 2
and press o Select.
3 Scroll n to Voicemail and press
o Select.
4 Scroll n to Settings and press o
Select.
5 Enter the voice mail account
number (maximum 14 digits) and
press o OK.
• A confirmation tone will sound
and the display will return to the
Voicemail screen.
60
15 Telephone
answering machine
(TAM)
Both telephone lines of your phone
feature an answering machine that
records unanswered calls when it is
activated. The answering machine can
store up to 59 messages for each line. The
maximum recording time is 3 minutes per
message, or 30 minutes for all messages
on both lines. The maximum length of an
outgoing message is 1 minute. You can
use the control keys on the base station
to perform the basic functions of the
answering machine such as message
playback, deleting messages and
adjustment of volume on the base station.
For a description of each function of the
control keys on the base station, please
see “Overview of the base station”
(section 5.4) for more details. You can
also use the answering machine menu to
access the answering machine functions.
(Functions available differ depending on
whether you are using the menu on the
handset or the base station.) Those
procedures are covered below. There is
also a menu to set the answering machine
options.
The telephone answering machine is ON
by default. To switch the answering
machine between on and off, press e on
your base station. Alternatively, you may
Telephone answering machine (TAM)
switch the answering machine on and off
via your handset (see section 15.6.2).
15.1
Playing Messages
15.1.1 Playback of messages via
handset
The answering machine message counter
blinks when there are new messages and
display the number of new messages. The
first recorded message is played first via
the loudspeaker. When all new messages
have been played, the answering machine
will stop and the message counter will
stop blinking.
1 Press the m key in idle mode, scroll
n to Answer Machine, and press
o Select.
2 Press o Select.
3 Scroll to Line 1 or Line 2 and
press o Select to start playing
new messages.
• The handset displays New and
the number of new messages in
the format 01/04, where 01 is
the number of the message being
played and 04 is the number of
new messages.
• If there are no new messages,
the handset displays the number
of old messages in the same
format (however ‘New’ is not
displayed.) and plays the old
messages.
Telephone answering machine (TAM)
15.1.2 Functions available during
playback
During playback, you can enable the
following functions by pressing o
Menu. Use n to scroll between the
functions and press o Select to
confirm.
Repeat
Replay the current
message
Next
Listen to the next
message.
Previous
Listen to the previous
message.
Delete
Delete the message
currently playing.
15.2
Delete all messages from the
handset
Warning
Deleted messages cannot be recovered.
Note
Unplayed messages will not be deleted.
1 Press the m key in idle mode, scroll
n to Answer Machine, and press
o Select.
2 Scroll n to Delete All and press
o Select.
3 Scroll n to select Line 1 or Line 2
and press o Select.
4 Delete All? is displayed on the
screen. Press o OK to confirm
deletion of all your messages.
• Waiting… is displayed while
the messages are deleted; then,
Deleted is displayed for 2
seconds, and the display returns
to the Answer Machine menu.
61
15.3
Turn the Answering Machine
On/Off from the Handset
You can turn the answering machine on
or off from the handset as follows.
1 Press the m key in idle mode, scroll
n to Answer Machine, and press
o Select.
2 Scroll n to Answer On/Off and
press o Select.
3 Scroll n to select Line 1 or Line 2
and press o Select.
4 Scroll n to select On or Off and
press o Select.
• A validation tone is emitted and
the screen returns to Answer
Machine menu.
15.4
Play, Record, or Delete an
Outgoing Message
You can record a personalized message
to be played when the answering
machine picks up an incoming call.
Note
The maximum length of an outgoing
message is 1 minute.
1 Press the m key in idle mode, scroll
n to Answer Machine, and press
o Select.
2 Scroll n to Record OGM and
press o Select.
3 Scroll n to select Line 1 or Line 2
and press o Select.
4 Scroll n to select Answer & Rec.
or Answer Only and press o
Select.
5 Scroll n to select Play, Record
Message, or Delete and press o
Select.
62
• If Play is selected, the current
outgoing message is played.
• If Record Message is selected,
a beep sounds and message
recording starts automatically.
• If Delete is selected and a
personal outgoing message was
previously recorded, Deleted is
displayed. The predefined OGM
is reinstated automatically.
15.5 Set the Answer mode
There are 2 answer modes available:
Answer Only and Answer & Record. By
default, the answer mode is Answer &
Record, which lets your caller leave a
message on the answering machine. This
can be changed to Answer Only mode,
which does not allow your caller to leave
any messages on the answering machine.
1 Press the m key in idle mode, scroll
n to Answer Machine, and press
o Select.
2 Scroll n to Answer Mode and
press o Select.
3 Scroll n to select Line 1 or Line 2
and press o Select.
4 Scroll n to select Answer & Rec.
or Answer Only and press o
Select.
• A validation tone is emitted and
the screen returns to Answer
Machine menu.
Note
Depending on the answer mode you have
selected, the appropriate default outgoing
Telephone answering machine (TAM)
message is played once the answering
machine picks up an incoming call.
Tip
You can set the answering machine to
play a personalized outgoing message.
See 15.4 above.
15.6
Answering Machine Settings
15.6.1 Ring Delay
This is the number of rings before the
answering machine answers and starts
playing your greeting message. You can
set the answering machine to start
playing your greeting message after 3 to
8 rings or the “Economy” option. The
default ring delay is Economy.
1 Press the m key in idle mode, scroll
n to Answer Machine, and press
o Select.
2 Scroll n to Settings and press o
Select.
3 Ring Delay is highlighted. Press o
Select.
4 Scroll n to select Line 1 or Line 2
and press o Select.
5 Scroll n key to select from 3 to 8
or Economy, and press o Select
to confirm.
• A validation tone is emitted and
the display returns to the
Settings menu.
Note
If Economy is selected, the ring delay
depends on the answering machine’s
condition.
Telephone answering machine (TAM)
• If there are new messages in the
answering machine, it will pick up the
line after 2 rings.
• If there are no new messages in the
answering machine, it will pick up the
line after 4 rings.
• Hence, if you want to check if you
have any messages without incurring
call charges, you can hang up the call
after the 3rd ring.
15.6.2 Remote Access
You can check the messages on your
answering machine by calling in from an
outside line and entering the remote
access code*. The keypad on the phone
you use to dial in acts like the functions
on your answering machine.
Note
This feature is deactivated by default.
* The remote access code (which is the
same as your PIN code) prevents any
unauthorised remote access of your
answering machine.
15.6.2.1 Activate/Deactivate
Remote Access
1 Press the m key in idle mode, scroll
n to Answer Machine, and press
o Select.
2 Scroll n to Settings and press o
Select. Then, scroll n to Remote
Access and press o Select.
3 Scroll n to select Activate or
Deactivate and press o Select.
63
• A validation tone is emitted and
the screen returns to Settings
menu.
15.6.2.2 Controlling the
Answering Machine from
an external call
1 From your external phone, dial
home.
• The answering machine answers
and starts playing your greeting
message.
2 Press # key and a voice prompt
invites you to enter your PIN code.
Enter the remote access code
(same as your PIN code).
• If the access code is incorrect, a
voice prompt "Security code
error, please enter again" will
sound.
• If the remote access code is
correct, a short validation tone
will be heard.
Note
Operation is cancelled if the PIN code is
not entered within 8 seconds.
If the answering machine is off, the phone
will enter into the remote access mode
after 10 rings. A voice prompt invites you
to enter the PIN code. Enter the PIN
(default is 0000) to activate the remote
access feature. You can then turn ON
the answering machine and play the
recorded messages.
64
The following table indicates how to
access the functions of the answering
machine using the telephone keypad.
Key
Action
1
Go to previous message.
2
Play the message.
3
Skip to the next message.
6
Delete the playing message.
7
Turn on the answering
machine.
8
Stop message playback.
9
Turn off the answering
machine.
15.6.3 Handset Screening
When Handset call screening is set to
On, you can press o Screen to start
call screening for incoming messages. If
you decide to pick up the call, press t.
Once you pick up, the recording will
stop automatically.
Note
If you have multiple handsets, only one
handset can enable handset call screening
for each call.
1 Press the m key in idle mode, scroll
n to Answer Machine, and press
o Select.
2 Scroll n to Settings and press o
Select. Then, scroll n to HS
Screening and press o Select.
3 Scroll n to select On or Off and
press o Select.
• A validation tone is emitted and
the screen returns to Settings
menu.
Telephone answering machine (TAM)
15.6.4 Setting the Outgoing
Message Language
The language of the default outgoing
messages and the voice prompts is
originally set to English. However you
can change the language of the default
outgoing messages as follows.
1 Press the m key in idle mode, scroll
n to Answer Machine, and press
o Select.
2 Scroll n to Settings and press o
Select. Then, scroll n to Voice
Language and press o Select.
3 Scroll n to select Line 1 or Line 2
and press o Select.
4 Scroll n to select the language and
press o Select.
• A validation tone is emitted and
the screen returns to Settings
menu.
Phonebook list, Redial list and Call
log
• Phonebook list with 200 entries
• Redial list with 10 entries
• Call log with 50 entries
16 Technical data
Temperature range
• Operation: Between 0 and 35ºC
(32 to 95ºF).
• Storage: Between -20 and 70ºC
(-4 to 158ºF).
Display
• Color LCD with backlight
• Selectable wallpaper
• Selectable color theme
General telephone features
• Caller name & number identification
• 5 standard + 10 polyphonic ringer
melodies on the handset, and 5
standard ringer melodies on the base
station
• Wideband synthesis for receiver and
loudspeaker
Technical data
Battery
• 2 × AAA, 600mAh batteries
Radio specifications
• Frequence Band: 1920 - 1930Mhz
• Maximum output power: 120mW
Weight and dimensions
Base:
• 403 grams
• 64.5mm × 123.5mm × 199.5mm
(H × D × W)
Handset:
• 128.5 grams
• 160mm × 28mm × 46mm
(H × D × W)
Relative humidity
• Operation: Up to 95% at 40°C
• Storage: Up to 95% at 40°C
65
17 Frequently asked
questions
• Charge the battery
• Move closer to the base station.
The phone is “Out of range”!
• Move closer to the base station.
www.philips.com/support
In this chapter, you will find the most
frequently asked questions and answers
about your phone.
17.1
Connection
The handset does not switch on!
• Charge the batteries: Put the handset
on the base station to charge. After a
few moments, the phone will switch
on.
• You may have accidentally switched
off the handset. In this case, press and
hold h for at least 1 second to
switch it on again (see section 9.1 “Switch the handset off/on”).
The handset does not charge!
• Check charger connections.
icon is not blinking during
charge!
• Battery is full: There is no need to
charge the battery.
• Bad battery contact: Adjust the
handset slightly.
• Dirty contact: Clean the batteries
contact with a cloth moistened with
alcohol.
Communication is lost during a call!
66
17.2
Set-up
Searching... is displayed on handset
and
icon is blinking!
• Move closer to the base station.
• Make sure that your base station is on.
• Reset your unit and restart handset
registration.
17.3
Sound
Handset does not ring!
Check that the Ring Volume is not set
to no bars (Ringer Off), and make sure
the
icon is not displayed on the
screen (see section 12.2.1 - “Set the Ring
Volume”).
Caller does not hear me!
Microphone may be muted: During a call,
press s.
There’s no dialling tone!
• No power: Check the connections.
• Batteries are empty: Charge the
batteries.
• Move closer to the base station.
• Wrong line cord(s) used: Use the line
cord(s) provided.
• Line adaptor is required: Connect the
line adaptor to the line cord(s).
Frequently asked questions
Caller does not hear me clearly!
• Move closer to the base station.
• Move the base station at least one
metre away from any electronic
appliances.
Frequent noise interference on my
radio or television!
• Move the base station as far away as
possible from the electrical appliances.
17.4
Caller number is not displayed!
• Service is not activated: Check your
subscription with your network
operator.
I cannot change the settings of my
voice mail!
• Operator voice mail is managed by
your operator and not the phone
itself. Please contact your operator
should you want to change the
settings.
Product behaviour
Keypad does not work!
• Unlock your keypad: Long press * in
idle mode.
The handset warms up when
making a long call and when it is on
the base station!
• This is a normal behavior. The
handset consumes energy while calling
and charging.
The handset cannot be registered
to the base station!
• Maximum number of handsets (8) has
been reached. To register a new
handset, unregister an existing
handset.
• Remove and replace the handset
batteries.
• Try again by disconnecting and
connecting the base station power
supply and follow the procedure to
register a handset (see section 13.6).
Frequently asked questions
My handset keeps going into idle
mode!
• If there are no key presses for 30
seconds, the handset will
automatically return to idle mode. It
will also return to idle mode
automatically when you place the
handset back on the base station (if
auto hang-up feature is on).
Phonebook entry cannot be stored
and Memory Full is displayed!
• Delete an entry to free memory
before saving your contact again.
The PIN code is wrong!
• The default PIN is 0000.
• Reset the handset to revert to the
default PIN code if it has been
changed before (see “Reset Unit” Section 13.8).
The answering machine does not
record calls.
• Make sure the answering machine is
connected to the power adaptor, and
67
the power adaptor is plugged into
mains supply which is switched on.
• Check if the answer machine is off, or
Answer only mode is selected.
• Check to see if the answering
machine is memory full. If so, delete
some or all messages.
• Try switching off the power at the
mains socket, and then turn it on
again after 1 minute.
Unable to perform remote
operation
• Make sure the remote access is on
(see Section 15.6.2).
• Make sure you entered the correct
remote access code.
• Use a touch-tone phone.
Note
If the above solutions do not help,
remove the power from both the
handset and the base. Wait for 1 minute
and try again.
68
Frequently asked questions
18 INDEX
A
Access phonebook 44
Access Redial list 36
Access the Call log 46
Activate/Deactivate handset loudspeaker
mode 39
Activate/Deactivate Remote Access 63
Adjust earpiece or speaker volume 39
Advanced settings 52
Advanced Settings menu tree 31
Answer a call 35
Answer an external call during
intercom 40
Answer Machine menu tree 32
Answering Machine Settings 63
Auto Conference 53
Auto hang-up 51
Auto Prefix 57
B
Backlight timing 51
Base station 20
Batteries 25
C
Call Barring 53
Call from redial list 33
Call from the call log 34
Call from the phonebook 34
Call using Direct Access Memory 35
Change PIN 54
Change the Dial Mode 57
Change the Display Language 49
Change the Handset Name 48
Charge battery 25
INDEX
Clock and Alarm menu tree 30
Clock and Alarm settings 42
Color themes 50
Connect the base station 23
Contrast 50
D
Deactivate/Activate Auto Hang-Up 51
Default PIN code 54
Default settings 59
Delete a call list entry 47
Delete a phonebook entry 45
Delete a redial number 37
Delete all call list entries 48
Delete all messages 61
Delete all phonebook entries 45
Delete all redial numbers 37
Delete Direct Access Memory 46
Dial mode 57
Direct Access Memory 45
Direct dialling 33
Display icons and Messages 18
Display languages 49
E
Easy Call 52
End a call 36
Establish a three-party conference call 40
F
Frequently asked questions 66
Functions available during playback 61
G
Getting started 23
69
H
Handset menu structure 28
Handset name 48
Handset Screening 64
Handsfree answering with handset 35
I
Install battery 25
Install your phone 25
Intercom 39
K
Key Beep 49
Keypad lock/unlock 38
L
Locate Handset 41
M
Make a call 33
Modify a phonebook entry 44
Mute/Unmute microphone 39
N
Network Service 59
Network Services menu tree 32
O
Overview of the base station 20
Overview of your handset 15
P
Personal settings 48
Personal Settings menu tree 29
Personalized message 62
Phonebook menu tree 28
PIN 54
Play, Record, or Delete an Outgoing
Message 62
70
Playback of messages via handset 61
Playing Messages 61
Power requirements 6
Predialling 33
R
Registration 54
Remote Access 63
Reset Unit 56
Ring Delay 63
Ring Settings 48
Ring tones 49
Ring Volume 48
S
Save a redial number 36
Save call list entry 47
Select phonebook melody 44
Select the Color Theme 50
Select the Display Wallpaper 50
Set a Call Barring number 53
Set Alarm 42
Set Alarm Tone 43
Set Auto Prefix 56
Set Call Barring Mode 53
Set Date and Time 42
Set Date Format 42
Set Easy Call number 52
Set Easy Call to On or Off 52
Set First Ring Detection 57
Set the Answer mode 62
Set the Backlight Time 51
Set the Display Contrast 50
Set the Ring Tones 49
Set the Ring Volume 48
Set Time Format 42
Set Voice Mail Number 60
Setting the Outgoing Message
Language 65
INDEX
Store a contact in the phonebook 43
Switch between an internal and external
call 40
Switch the handset off/on 38
T
Technical data 65
Telephone answering machine 60
Text or number entry 38
The call log 46
Transfer an external call 40
Turn the Answering Machine On/Off
from the Handset 62
U
Unregister 55
Using the Call log 46
Using the Intercom 39
Using the Redial list 36
Using your phone 33
Using your Phonebook 43
V
Voice Mail 59
W
Wallpaper images 50
What’s in the box 14
X
XHD Sound 54
Y
Your phone 14
INDEX
71
UCZZ01911ZZ(0)
©2008 Koninklijke Philips Electronics N.V.
All rights reserved
Reproduction in whole or in part is prohibited without the
written consent of the copyright owner
Document order number: 3111 285 47141 (US-EN)