advertisement
Contents
Contents ............................................................................................................1
Preface ................................................................................................................2
Installation ...........................................................................................................4
Unpacking.......................................................................................................................................................................................4
Connecting the LCD Monitor and Base.................................................................................................................................5
Optional Mounting Alternatives..............................................................................................................................................5
Tilt, Swivel and Pivot Rotation..................................................................................................................................................5
Detaching LCD Monitor from Its Stand .................................................................................................................................5
Interface for Arm Applications .................................................................................................................................................6
Connecting the Display ..............................................................................................................................................................6
Connecting the AC Power .........................................................................................................................................................6
Connecting the Audio Cable ....................................................................................................................................................6
Connecting the USB up Stream Cable...................................................................................................................................6
Connecting the USB Down Stream.........................................................................................................................................7
Setting Up the LCD Monitor......................................................................................................................................................7
Power Management System.....................................................................................................................................................7
Display Controls ..................................................................................................8
User Controls..................................................................................................................................................................................8
Adjusting the Monitor's Display ..............................................................................................................................................9
OSD Lock Out Function ........................................................................................................................................................... 11
Technical Information........................................................................................12
Specifications.............................................................................................................................................................................. 12
Standard Timing Table......................................................................................14
Troubleshooting.................................................................................................16
Product Registration and Technical Support.....................................................17
1
Preface
This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer.
FCC Statement Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reposition or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced monitor technician for help.
Warning
Use only shielded signal cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for comliance could void your authority to operate the equipment.
This device complies with part 15 FCC Rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
Canadian DOC Notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
2
Important Safety Instructions
Please read the following instructions carefully. This manual should be retained for future use.
1. To clean LCD Monitor screen;
-- Power off LCD Monitor and unplug the AC Cord.
-- Spray a non-solvent cleaning solution onto a rag.
-- Gently clean the screen with dampened rag.
2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water,
moisture or sunlight can severely damage it.
3. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be performed by an authorized technician.
5. Store LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). Storing the LCD
Monitor outside this range could result in permanent damage.
6. If any of the following occurs, immediately unplug your monitor and call an authorized technician.
* Monitor to PC signal cable is frayed or damaged.
* Liquid spilled into LCD Monitor or the monitor has been exposed to rain.
* LCD Monitor or the case is damaged.
7. Only use the supplied main lead to connect the monitor. For a nominal current up to 6A and a device weight above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm 2 must be used.
Important Recycle Instruction:
Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the electronic industries alliance at WWW.EIAE.ORG. For lamp specific disposal information check WWW.LAMPRECYCLE.ORG.
Contains Mercury, Dispose of Properly
3
Installation
Unpacking
Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a stable and clean surface near a wall power outlet. Make sure that LCD Monitor has enough space around it for sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the
Monitor does not become too hot.
After you unpack the LCD Monitor, make sure that the following items were included in the box:
* LCD Monitor * User's Manual
* Monitor-to-PC VGA Cable * Stereo Jack Audio Cable
* Monitor-to-PC DVI-to-HDMI Cable
* Monitor-to-PC USB up Stream Cable
* Power Cord
* Base
If you find that any of these items is missing or appears damaged, contact your dealer immediately.
4
Connecting the LCD Monitor and Base
When you open the box, place the monitor and put on the desk first. (See fig. 1-1) nConnect the LCD monitor and base. oUsing your hand, lock the base and neck by screwing the thread clockwise. pTo unlock the height adjustment feature of the stand, locate the pin on the back of the stand column and turn the pin knob counter-clockwise. qMount the cable clip for cable management.
4 hook up the cable clip
2
3
PIN is pull out with draging
Figure 1-1
Optional Mounting Alternatives
Warning: The monitor stand base may forcefully extend and cause injury. Raise the monitor to its "Full Up" position before removing the monitor stand.
Tilt, Swivel and Pivot Rotation
The LCD Monitor is designed to have a tilt range of -5°to +20°, a swivel range of -35°to
+35°, and a 90° pivot rotation. (See fig. 1-2)
35
+20
-5
35
90
UP
Figure 1-2
Warning
Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will result in damaging the Monitor and Monitor stand.
Detaching LCD Monitor from Its Stand
Unscrew screws n the swivel base support column and pull downo the hinge to release. pCable management ring.
1
3
2
Figure 1-3
5
Interface for Arm Applications
The rear of this LCD display has four integrated 4 mm, 0.7 pitch threaded nuts, as well as four 5 mm access holes in the plastic covering as illustrated in Figure 1-4. These specifications meet the
VESA Flat Panel Monitor Physical Mounting Interface Standard
(paragraphs 2.1 and 2.1.3, version 1, dated 13 November 1997).
Note: Please using M 4mm x 16mm (L) screw for this application.
Figure 1-4
Connecting the Display
1. Power off your computer.
2. Connect one end of the signal cable to the LCD Monitor’s VGA port or HDMI port. (See Fig 1-5)
3. Connect the other end of the signal cable to the VGA port, DVI port or HDMI port on your PC or video source: (DVD players, game consoles, set top boxes…etc)
4. Make sure connections are secure.
Note: HDMI to HDMI cable is not supplied.
Connecting the AC Power
5. Connect the power cord to the LCD Monitor.(See Fig. 1-6)
6. Connect the power cord to an AC power source.
Power Jack
Connecting the Audio Cable
1. Connect the audio cable to the "LINE OUT" jack on your PC's audio card or to the front panel's “AUDIO OUT” jack of your CD
ROM drive. (See Fig. 1-7)
Connect the other end of the audio cable to the LCD Monitor's
"LINE IN" jack.
Note: If a HDMI to HDMI cable (not supplied) is connected, the audio cable is not required. A HDMI to HDMI cable will carry both audio/video signals.
Connecting the USB up Stream Cable
1. Connect the USB UP Stream Cable to the LCD Monitor.
(See Fig. 1-8)
HDMI D-SUB
Figure1-5
Audio Jack
Power Cord
Figure1-6
Figure1-7
USB UP Stream Figure1-8
6
Connecting the USB Down Stream
1. Connect the USB Down Stream to USB Device.
(See Fig. 1-9)
Mouse
USB DOWN Stream
Figure1-9
Setting Up the LCD Monitor
1. Make sure the AC power cord is connected to the LCD Monitor.
2. Turn on the LCD Monitor's power switch, located on the bezel of the monitor.
Power Management System
This LCD Monitor complies with the VESA DPM Power Management guidelines. If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If input from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically "wake up". When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED indicator will light yellow.
7
Display Controls
User Controls
A brief description and the location of all LCD Monitor functions controls and indicators:
1
2
3
Figure 2-1
Power LED will be Green when monitor is on, be yellow when in power saving mode, be dark when monitor in off mode.
Power ON/OFF switch. Push to power on or power off. (Toggle switch)
Menu/Enter
Shows main OSD menu/ Enter key (in OSD menu)/ Audio mute and unmute
( must activate Volume OSD first, push ▲ / ▶ then Menu/Enter)
4
Shows Volume OSD/ Moves right or up (in OSD menu)
5
Selects input source/ Moves left or down (in OSD menu)
6
Auto/Exit Auto adjustment (in D-Sub input only)/ Exit OSD menu/ Exit (in OSD menu)
8
Adjusting the Monitor's Display
Main OSD
Main Menu icon
Sub
Menu item
Sub Menu item Description
STANDARD Default Setting. Reflects native display capability.
MOVIE
Displays scenes in clearest detail. Pictures and photographs appear in vibrant colors with sharp detail.
Preset Mode
TEXT
PHOTO
Optimal balance of brightness and contrast prevent eyestrain. The most comfortable way to read onscreen text
Enhances colors and emphasize fine detail.
Auto Contrast
Black Level
Sharpness
Adjusts the contrast of screen image automatically.
Adjusts the black level of screen image.
Adjusts the scaling effect. (smoother or sharper.)
9
Expansion Mode
Auto Adjustment
FULL
ASPECT
Zoom
Expands the image to full screen.
Makes the image 4:3, 5:4, or 16:9
(dependent on timing)
Expands the image by 2%.
Auto adjusts the H/V Position, Phase and Clock of picture. (available in analog mode only)
H. Position
Adjusts the horizontal position.
(available in analog mode only)
V. Position
Adjusts the vertical position.
(available in analog mode only)
Adjusts picture Clock.
Clock
(available in analog mode only)
Adjusts picture Focus.
Phase
(available in analog mode only)
9300K
7500K
5000K sRGB
Sets the color temperature to 9300K.
Sets the color temperature to 7500K.
Sets the color temperature to 5000K.
Sets the color temperature to sRGB.
User R/G/B Allows users to adjust red/green/blue intensity.
OSD
H. Position
OSD
V. Position
OSD
Turn Off
Volume
Adjusts the horizontal position of the OSD.
Adjusts the vertical position of the OSD.
Adjusts the OSD timeout.
Adjusts the volume of audio
D-SUB Selects input signal to analog (D-Sub)
Input Select
HDMI Selects input signal to digital (HDMI)
720/640x400
Resolution Select 1360/1280/1024x768
1680/1400x1050
Selects the resolution of choice.
DDC/CI ON/OFF Turns ON/OFF DDC/CI support
10
Icon Function Description
9300 CIE coordinated Color Temperature of 9300°K Sets the CIE coordinate color temperature to 9300°K
7500 CIE coordinated Color Temperature of 7500°K Sets the CIE coordinate color temperature to 7500°K
5000 CIE coordinated Color Temperature of 5000°K Sets the CIE coordinate color temperature to 5000°K sRGB CIE coordinated Color Temperature of 6500°K Sets the CIE coordinate color temperature to 6500°K
User
Three colors (Red, Green, Blue) can be adjusted from the OSD menu
Sets the settings to a by user defined CIE
Temperature.
OSD Lock Out Function
When monitor is in normal display, you can enable the “OSD Lock Out” function.
Option 1: OSD & Power button lock – all 5 buttons including the “POWER” button are locked.
Press and hold the “Auto/Exit” and “ to lock all 5 buttons.
” buttons at the same time for 3 seconds
The monitor will show an “OSD LOCKED !” message for 5 seconds and the message will disappear automatically.
OSD LOCKED !
Repeat this step to unlock.
Option 2: OSD lock – all 4 buttons are locked except the “POWER” button.
Press and hold the “ to lock the buttons.
” and “ ” buttons at the same time for 3 seconds
The monitor will show an “OSD LOCKED !” message for 5 seconds and the message will disappear automatically.
OSD LOCKED !
Repeat this step to unlock
11
Technical Information
Specifications
LCD Panel
Size 22W"
Display Type Active matrix color TFT LCD
Resolution
Display Dot
Display Color
Video
1680 x 1050
1680 x (RGB) x 1050
16.7M with FRC or Dithering
Input Signal
Input Impedance
Analog RGB 0.7Vp-p
75 Ohm ± 2%
Digital TMDS
Amplitude
Multi-mode Supported
0 - 0.7 ± 0.05 Vp
Horizontal Frequency: 30 ~ 83 kHz
Vertical Frequency: 56 ~ 75 Hz
Control
Power switch (hard and soft types)
Audio
On/Off switch with LED indicator
Input 500mVrms
OSD
Brightness Digital
Contrast Digital
Horizontal Position Digital
Vertical Position Digital
Phase Digital
Clock Digital
Display Mode Setup Use EEPROM to save settings in memor.
12
Power Management
Mode
DPM On (With USB and
Audio option.)
DPM Off (Without USB and
Audio option.)
DC switch off (Without USB and Audio option.)
Disconnected (Without USB and Audio option.)
Power Consumption*
56 W maximum
2 W maximum
1 W maximum
2 W maximum
AC Input
240 VAC
240 VAC
240 VAC
240 VAC
LED Color
Green
Yellow
Yellow
*Meeting VESA DPM requirements measured from AC Input end of AC power cord.
Sync Input Analog Digital
Signal
Separate TTL compatible horizontal and vertical synchronization.
TMDS
Polarity Positive and negative
--
Plug & Play
External Connection
Supports VESA DDC2B DDC/CI functions
Power Input (AC input)
Video Cable
AC socket
15-pin D-sub / 19-pin HDMI connector
Monitor-to-PC D-SUB Cable / Monitor-to-PC DVI-HDMI Cable
Stereo Jack Audio Cable
Power Input (AC input)
USB Cable
AC socket
USB up Stream Connector
Environment
Operating Condition
Storage Condition
Temperature
Relative Humidity
Temperature
Relative Humidity
Power Supply (AC Input)
5°C to 40°C/41°F to 104°F
20% to 80%
-20°C to 60° C/-4°F to140°
5% to 85%
Input Voltage Single phase, 100 ~ 240VAC, 50 / 60 Hz
1.2 A Input Current
Size and Weight
Dimensions
Net Weight
Gross Weight
505.2 (W) x MAX. 521.45 mm(H) x 229 mm(D) mm
7.165
± 0.3 kg
8.9
± 0.3 kg
Dark
13
Standard Timing Table
If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing.
TIMING NAME
APPLE MAC-480
FH (KHz)
FV (Hz)
66.67
SYNC
POLARITY
–
TOTAL/ ACTIVE
(DOT / LINE)
SYNC
WIDTH
FRONT
PORCH
(DOT / LINE)
BACK
PORCH
PIXEL
FOREQ.(MHz)
48
25.175
60
48
25.175
35
48
25.175
33
864 64
525 480 3 3
96
30.24
39
120
31.5
640 16
31.5
16
70Hz 70.087
APPLE MAC-800 74.55 –
449
667
+
624 3
28.322
60
54
28.322
35
1
224
57.2832
39
600
36
22
88
40
64
50
160
49.5
21
1088 112 112
33.75
23
XGA 60.004 806
65
29
112
71.664
36
144
75
14
TIMING NAME
FH (KHz)
FV (Hz)
SYNC
POLARITY
TOTAL/ ACTIVE
(DOT / LINE)
SYNC
WIDTH
FRONT
PORCH
(DOT / LINE)
BACK
PORCH
PIXEL
FOREQ.(MHz)
912 3
80
32
+
864 1
94.499
44
864
108
32
915 3
100
39
720 3
74.5
20
1800 112
+ 960
108
36
1800 112
+ 960
126
36
1800 112
+ 960
135
36
248
38
108
248
38
135
60Hz 75
1792 112
795
85.5
18
Red. BLKing 60Hz 59.901 – 926 900 6 3
80
88.75
17
60Hz 59.887 934
75Hz 74.984 942
106.5
25
3
136.75
33
3
80
119
21 Red. BLKing 60Hz 59.883 – 1080 1050 6
60Hz 59.954 1089 3
146.25
30
75Hz 74.892 1099
187
40
Note :
1. DVI does not suppport 1680 x 1050 @ 75Hz. Modes 640x350, 640x400, and 720x400 is centered in the middle of the display and cannot be expanded to full screen.
2. HDMI supports 480i, 480p, 720p, 1080i and 1080p
15
Troubleshooting
This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among various VGA cards in the market, users may initially experience an unstable or unclear display whenever a new display mode or new VGA card is selected.
Attention
This LCD Monitor Supports Multiple VGA Modes.
Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor.
PROBLEM Picture is unclear and unstable
The picture is unclear and unstable, please perform the following steps:
1. Enter PC to “Shut Down Windows” status while you’re in MS-Windows environment.
2. Check the screen to see if there’s any black vertical stripes appear. If there are, take advantage of the “Clock” function in OSD menu and adjust (by increment or decrement numbers) until those bars disappear.
3. Move to “Phase” function in OSD menu again and adjust the monitor screen to its most clear display.
4. Click “No” on “Shut Down Windows” and back to the normal PC operating environment.
PROBLEM There is no picture on LCD Monitor
If there’s no picture on the LCD Monitor, please perform the following steps:
1. Make sure the power indicator on the LCD Monitor is ON, all connections are secured, and the system is running on the correct timing. Refer to Chapter 3 for information on timing.
2. Turn off the LCD Monitor and then turn it back on again. If there is still no picture, press the Adjustment
Control button several times.
3. If step 2 doesn’t work, connect your PC system to another external CRT. If your PC system Functions properly with a CRT Monitor but it does not function with the LCD Monitor, the output timing of the VGA card may be out of the LCD’s synchronous range. Please change to an alternative mode listed in the Standard Timing
Table or replace the VGA card, and then repeat steps 1 and 2.
PROBLEM There is no picture on LCD Monitor
If you have chosen an output timing that is outside of the LCD Monitor’s synchronous range (Horizontal: 30 ~
80 kHz and Vertical: 56 ~ 75 Hz), the OSD will display a “Out of Range” message. Choose a mode that is supported by your LCD Monitor.
Also, if the signal cable is not connected to LCD monitor at all or properly, the monitor screen will display a message “No Input Signal”.
16
Product Registration and Technical Support
Register Your Planar Products Today
Thank you choosing Planar. To assure you receive all the benefits of your Planar product and services, register your Planar product today.
Visit our website to register your product at http://www.planar.com/support/product_registration.html
Cables, Replacement Lamps, Accessories
To find cables, replacement lamps and accessories for your Planar projector, LCD monitor, touch screen or other Planar products visit our online store at www.PlanarOnline.com or find other stores who carry Planar products at http://www.planar.com/howtobuy
Technical Support
Visit Planar at http://www.planar.com/support for product registration, operations manuals, touch screen drivers, warranty information and access to Planar's Technical Library for online troubleshooting.
To speak with Planar Customer Support please have you model and serial number available and dial:
Planar Support
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.
Hours: 24 hours a day, 7 days a week.
Toll or long distance charges may apply.
17
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 Preface
- 5 Installation
- 5 Unpacking
- 6 Connecting the LCD Monitor and Base
- 6 Optional Mounting Alternatives
- 6 Tilt, Swivel and Pivot Rotation
- 6 Detaching LCD Monitor from Its Stand
- 7 Interface for Arm Applications
- 7 Connecting the Display
- 7 Connecting the AC Power
- 7 Connecting the Audio Cable
- 7 Connecting the USB up Stream Cable
- 8 Connecting the USB Down Stream
- 8 Setting Up the LCD Monitor
- 8 Power Management System
- 9 Display Controls
- 9 User Controls
- 10 Adjusting the Monitor's Display
- 12 OSD Lock Out Function
- 13 Technical Information
- 13 Specifications
- 15 Standard Timing Table
- 17 Troubleshooting
- 18 Product Registration and Technical Support