Planar Systems PL1702-BK Product Manual

PL1702

Contents

Preface ................................................. 2

Installation .............................................. 4

Unpacking ...............................................................................................................................................................................4

Connecting the LCD Monitor and Base........................................................................................................................5

Viewing Angle Adjustment...............................................................................................................................................5

Detaching LCD Monitor from Its Stand........................................................................................................................5

Interface for Arm Applications ........................................................................................................................................5

Connecting the Display......................................................................................................................................................5

Connecting the AC Power.................................................................................................................................................6

Connecting the Audio Cable............................................................................................................................................6

Setting Up the LCD Monitor .............................................................................................................................................6

Power Management System ............................................................................................................................................6

Display Controls .......................................... 7

User Controls..........................................................................................................................................................................7

Adjusting the Monitor's Display .....................................................................................................................................7

Function Description...........................................................................................................................................................8

OSD Lock Out Function......................................................................................................................................................9

Technical Information .................................... 10

Specifications ...................................................................................................................................................................... 10

Standard Timing Table .................................................................................................................................................... 12

Troubleshooting ......................................... 14

Product Registration And Technical Support.................. 15

1

Preface

This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. Windows is a registered trademark of Microsoft Inc. Other brand or product names are trademarks of their respective holders.

FCC Statement Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reposition or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced monitor technician for help.

Warning

Use only shielded signal cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

This device complies with part 15FCC Rules. Operation is subject to the following two conditions(1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

This device complies with part 15 FCC Rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

Canadian DOC Notice

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

2

Important Safety Instructions

Please read the following instructions carefully. This manual should be retained for future use.

1. To clean the LCD Monitor screen:

-- Power off the LCD Monitor and unplug the AC Cord.

-- Spray a non-solvent cleaning solution onto a rag.

-- Gently clean the screen with dampened rag.

2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can severely damage it.

3. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be performed by an authorized technician.

5. Store the LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). Storing the LCD

Monitor outside this range could result in permanent damage.

6. If any of the following occurs, immediately unplug your monitor and call an authorized technician.

* Monitor to PC signal cable is frayed or damaged.

* Liquid spilled into LCD Monitor or the monitor has been exposed to rain.

* LCD Monitor or the case is damaged.

7. Only use the supplied main lead to connect the monitor. For a nominal current up to 6A and a device weight above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm

2

must be used.

Important Recycle Instruction:

Lamp(s) inside this product contain mercury. This product may contain other electronic waste that can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal Laws. For more information, contact the

Electronic Industries Alliance at WWW.EIAE.ORG. For lamp specific disposal information check WWW.LAMPRECYCLE.ORG.

Contains Mercury, Dispose of Properly

3

.

Installation

Unpacking

Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a stable and clean surface near a wall power outlet. Make sure that the LCD Monitor has enough space around it for sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the Monitor does not become too hot.

After you unpack the LCD Monitor, make sure that the following items were included in the box:

* LCD Monitor * User's Manual

* Monitor-to-PC VGA Cable

* Stereo Jack Audio Cable

* Power Cord

* Base

4

Connecting the LCD Monitor and Base

When you open the box, take the base and put on the desk first. Then connect the LCD Monitor and base.(See fig.1-1 )

Figure 1-1

Viewing Angle Adjustment

The LCD Monitor is designed to allow users to have a comfortable viewing angle. The viewing angle can be adjusted from -5°to +20°.and the swivel angle can be adjusted to +/-360° (See fig. 1-2)

360 °

-5°

+20°

360 °

Figure 1-2

Warning

Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will result in damaging the Monitor and Monitor stand.

Detaching LCD Monitor from Its Stand

Unscrew screws n the swivel base support column and pull downo the hinge to release.

M 4mmX11mm screw x 4

Interface for Arm Applications

Before installing to mounting device, please refer to Fig.1-3.

The rear of this LCD display has four integrated 4 mm, 0.7 pitches threaded nuts, as well as four 5 mm access holes in the plastic covering as illustrated in Figure 1-4. These specifications meet the

VESA Flat Panel Monitor Physical Mounting Interface Standard

(paragraphs 2.1 and 2.1.3, version 1, dated 13 November 1997).

Note :Please using M 4mm x 11mm (L) screw for this application.

Connecting the Display

1.

Power off your computer.

2.

Connect one end of the signal cable to the LCD Monitor’s VGA port. (See Fig 1-5)

3.

Connect the other end of the signal cable to the VGA port on your PC.

4. Make sure connections are secure.

Figure 1-3

Figure 1-4

Figure 1-5

5

Connecting the AC Power

1.

Connect the power cord to the LCD Monitor.(See Fig. 1-6)

2.

Connect the power cord to an AC power source.

Figure 1-6

Connecting the Audio Cable

1.

Connect the audio cable to the “LINE OUT “ jack on your PC's audio card or to the front panel's “AUDIO OUT” jack of your CD

ROM drive. (See Fig. 1-7)

2.

Connect the other end of the audio cable to the LCD Monitor's

" LINE IN " jack.

Figure 1-7

Setting Up the LCD Monitor

1.

Make sure the AC power cord is connected to the LCD Monitor.

2.

Turn on the LCD Monitor's power switch, located on the bezel of the monitor.

Power Management System

This LCD Monitor complies with the VESA DPM Power Management guidelines. If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If input from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically "wake up". When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED indicator will light yellow.

6

Display Controls

User Controls

A brief description and the location of all LCD Monitor functions controls and indicators:

Figure 2-1

1

2

Power LED will be Green when the monitor is on, Yellow when in power saving mode, and Dark when the monitor is off.

Press this button to turn on and turn off the monitor.

Function select (clockwise)

3

Function select (counter-clockwise)

4

Audio Volume increase (For PL1700M only) / Adjust increase.

5

Auto adjust (When OSD/Volume control is not activated) / Audio Volume decrease (For PL1700M only) / Adjust decrease

Adjusting the Monitor's Display

The monitor has four function control buttons to select among functions shown on OSD menu, designed for easy user-viewing environments.

OSD Function Menu

To access OSD Main menu, simply press and

Function Select control buttons, and the menu diagram will pop up on the screen as shown on Fig. 2-2:

Continue pressing the Function Select buttons to scroll through the entire menu items, then press Adjustment Control buttons to adjust content of selected item.

Figure 2-2

Attention

Firmware revision may have been updated into a latest version while the version number shown on all OSD menus in this manual will stay as Ver. 1.00.

7

Function Description

Icon Function

Brightness

Contrast

H. Position

V. Position

OSD Transparency

Function Description

101 scales of brightness are available to choose from (0 to 100).

101 scales of contrast are available to choose from (0 to 100).

This function let's you adjust the display's horizontal position.

This function let's you adjust the display's vertical position.

This function let's you set the transparency of the OSD menu. The transparency is adjustable from 0 to 10. 11 scales are available.

Phase

Clock

A total of 101 scales (0 to 100) are available to adjust the focus and clarity of the display.

This function carries a frequency-tracking feature that offers users better stability and clarity. 101 scales (from -50 to +50) are available on the mode that is currently running. The adjustable range can be variable in different modes. This function records the deviated number of clock period between input timing and supported timing. The clock value may not be ”0” after Auto Adjustment when the input timing is different from supported timing.

Color Temperature

Push the or button to select a different color temperature. Please see the diagram below for function and description.

OSD H. Position

This function moves the OSD menu window horizontally.

OSD V. Position

Graph / Text

Recall

Language

This function moves the OSD menu window vertically.

Because the H and V-Frequencies of both 640 x 400 70Hz, and 720 x 400 70Hz, are the same, this function let's you manually select either 640 x 400 (graphics mode), or 720 x 400 (text mode).

The recall function will return all adjusted parameters to factory preset values.

Nine OSD language options are available:

English, German, French, Spanish, Italian, Japan, Russian, Simplified Chinese and

Traditional Chinese.

Press the or adjustment control button to select other language.

Auto Adjustment

The Auto Adjustment function let you adjust the display size, clock and phase to obtain the best viewing settings. This process will take 3 ~ 5 seconds to complete. Attention: After Auto Adjustment, the display might display wrong position or size, if it has received a pattern which has no screen border.

Exit Saves the values of this setting and exits the OSD menu function.

Icon Function Description

9300

CIE coordinated Color Temperature of 9300°K Sets the CIE coordinate color temperature to 9300°K

7500

CIE coordinated Color Temperature of 7500°K Sets the CIE coordinate color temperature to 7500°K

6500

CIE coordinated Color Temperature of 6500°K Sets the CIE coordinate color temperature to 6500°K

User

Three colors (Red, Green, Blue) can be adjusted from the OSD menu

Sets the settings to a user defined CIE Temperature.

8

OSD Lock Out Function

When monitor is in normal display, you can enable the “OSD Lock Out” function.

Option 1: OSD lock – all 4 buttons are locked except the “POWER” button.

Press and hold the

, and

buttons for same time 3 seconds to lock the buttons.

The monitor will show an “OSD Lock Out” message for 5~10 seconds and the message will disappear automatically.

Repeat this step to unlock.

Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked.

Press and hold the and buttons for same time 3 seconds to lock all 5 buttons.

The monitor will show an “Lock Out” message for 5~10 seconds and the message will disappear automatically.

Repeat this step to unlock

9

Technical Information

Specifications

LCD Panel

Size

Display Type

Resolution

Display Dot

Display Area (mm)

Display Color

Lamp Voltage (typical)

Lamp Current (typical)

Video

Input Signal

Input Impedance

Polarity

Amplitude

Multi-mode Supported

17" (43 cm)

Active matrix color TFT LCD

1280 x 1024

1280 x (RGB) x 1024

337.92 x 270.336 (H x V)

16.7M (RGB 6 bits+FRC)

660 Vrms

7.5 mA rms.

Analogue RGB 0.7Vp-p

75 Ohm ± 2%

Positive, Negative

0 - 0.7 ± 0.05 Vp

Horizontal Frequency: 30 ~ 80 kHz

Vertical Frequency: 56 ~ 75 Hz

Control

Power switch

OSD

Brightness

Contrast

Horizontal Position

Vertical Position

Phase

Clock

Display Mode Setup

OSD Format

On/Off switch with LED indicator

Digital

Digital

Digital

Digital

Digital

Digital

Use EEPROM to save settings in memory

26 characters x 15 rows

10

Power Management

Mode

DPM ON

DPM OFF

Power Consumption*

48W maximum

2W maximum

AC Input

240 VAC

240 VAC

LED Color

GREEN

Yellow

DC switch off

Disconnected

1W maximum

2W maximum

240 VAC

240 VAC

Dark

Dark

Meeting VESA DPM requirements measured from AC Input end of AC power cord.

Sync Input

Analogue

Signal

Polarity

Separate TTL compatible horizontal and vertical synchronization

Positive and negative

Supports VESA DDC2B functions

Plug & Play

External Connection

Power Input (AC input)

Video Cable

Audio Cable

Environment

Operating Condition:

Storage Condition:

AC socket

15-pin D-sub connector

Stereo Jack

Temperature

Relative

Humidity

Temperature

Relative

Humidity

5°C to 40°C/41°F to 104°F

20% to 80%

-20°C to 60° C/-4°F to140° F

5% to 85%

Power Supply (AC Input)

Input Voltage

Input Current

Size and Weight

Dimensions

Net Weight

Gross Weight

Single phase, 100 ~ 240VAC, 50 / 60 Hz

1.2 A maximum

367 (W) x 383.4 (H) x 199 (D) mm

3.6

± 0.3 kg

5.6

± 0.3 kg

11

Standard Timing Table

If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing.

TIMING

FH(kHZ)

FV(HZ)

SYNC TOTAL

POLARITY (DOT/

LINE)

ACTIVE

(DOT/

LINE)

SYNC

WIDTH

(DOT/LINE)

FRONT

PORCH

(DOT/LINE)

BACK

PORCH

(DOT/LINE)

PIXEL

FOREQ

(MHZ)

NEC PC9801 56.42 – 440 400 8 7 25

VGA-GRAPH 70.087 2 12 35

NEC PC9821 70.15 – 449 400 2 13 34

APPLE MAC-480 66.67 – 525 480 3

VESA-480-72Hz 72.809 – 520 480 3

VESA-480-75Hz 75 – 500 480 3

VGA-400-TEXT 70.087 + 449 400

832x624 APPLE 49.725 – 1152 832

2

64

3

1

1

12

32

39

20

16

35

224 57.2832

VESA-600-60Hz 60.317 +

VESA-600-72Hz 72.188 +

628

666

600

600

4

6

VESA-600-75Hz 75 + 625 600 3

1

37

1

23

23

21

COMPAQ-XGA 66.132 + 816 768

VESA-768-70Hz 70.069 – 806 768

VESA-768-75Hz 75.029 + 800 768

APPLE MAC-768 75.02 – 803 768

4

6

3

3

8

3

1

3

36

29

28

29

12

1280x1024VESA-1

024-60Hz

60 + 1066 1 38

1280x1024VESA-1

024-75Hz

75 + 1066 1 38

Note: Modes 640x350, 640x400 and 720x400 is centered in the middle of the display and cannot be expanded to full screen.

13

Troubleshooting

This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among various VGA cards in the market, users may initially experience an unstable or unclear display whenever a new display mode or new VGA card is selected.

Attention

This LCD Monitor Supports Multiple VGA Modes.

Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor.

PROBLEM Picture is unclear and unstable

The picture is unclear and unstable, please perform the following steps:

1.

Enter PC to “Shut Down Windows” status while you’re in MS-Windows environment, except Windows XP. In

Windows XP open the specific application where the problems appear.

2.

Check the screen to see if there’s any black vertical stripes appear. If there are, take advantage of the “Clock” function in OSD menu and adjust (by increment or decrement numbers) until those bars disappear.

3.

Move to “Phase” function in OSD menu again and adjust the monitor screen to its most clear display.

4.

Click “No” on “Shut Down Windows” and back to the normal PC operating environment.

PROBLEM There is no picture on LCD Monitor

If there’s no picture on the LCD Monitor, please perform the following steps:

1.

Make sure the power indicator on the LCD Monitor is ON, all connections are secured and the system is running on the correct timing. Refer to Chapter 3 for information on timing.

2.

Turn off the LCD Monitor and then turn it back on again. If there is still no picture, press the Adjustment

Control button several times.

3.

If step 2 doesn’t work, connect your PC system to another external CRT. If your PC system Functions properly with a CRT Monitor but it does not function with the LCD Monitor, the output timing of the VGA card may be out of the LCD’s synchronous range. Please change to an alternative mode listed in the Standard Timing

Table or replace the VGA card, and then repeat steps 1 and 2.

PROBLEM There is no picture on LCD Monitor

If you have chosen an output timing that is outside of the LCD Monitor’s synchronous range (Horizontal: 30 ~

80 kHz and Vertical: 56 ~ 75 Hz), the OSD will display an “Out of Range” message. Choose a mode that is supported by your LCD Monitor.

Also, if the signal cable is not connected to LCD monitor at all or properly, the monitor screen will display a message “No Input Signal”.

14

Product Registration and Technical Support

Register Your Planar Products Today

Thank you choosing Planar. To assure you receive all the benefits of your Planar product and services, register your Planar product today.

Visit our website to register your product at http://www.planar.com/support/product_registration.html

Cables, Replacement Lamps, Accessories

To find cables, replacement lamps and accessories for your Planar projector, LCD monitor, touch screen or other Planar products visit our online store at www.PlanarOnline.com or find other stores who carry Planar products at http://www.planar.com/howtobuy

Technical Support

Visit Planar at http://www.planar.com/support for product registration, operations manuals, touch screen drivers, warranty information and access to Planar's Technical Library for online troubleshooting.

To speak with Planar Customer Support please have you model and serial number available and dial:

Planar Support

Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.

Hours: 24 hours a day, 7 days a week.

Toll or long distance charges may apply.

15

HDPNRD3700I