HiPath 3000 V3.0
Vital Statistics
s
Global network of innovation
Author R Wheeler, HiPath 3000 Sales Support
s
HiPath 3250, 3350 & 3550 V3.0
Vital Statistics
HiPath 3250, 3350 & 3550 V3.0 Vital Statistics
Detailed below is information on the physical build and specifications for version
3 of the HiPath 3250, 3350 and 3550 wall mounted voice servers which should
be useful when responding to tenders etc.
Maximum Capacities
The following figures exclude extensions connected via adapters.
HiPath 3250
Maximum corded (TDM) extensions
Maximum cordless (TDM) extensions
Maximum IP devices
Maximum trunks
8
8
Nil
4 B Channels (BRI ISDN only)
HiPath 3350
Maximum corded (TDM) extensions
Maximum cordless (TDM) extensions
Maximum IP devices
Maximum trunks
44
16
96
16
HiPath 3550
Maximum corded (TDM) extensions
Maximum cordless (TDM) extensions
Maximum IP extensions
Maximum trunks
116
64
192
60 (one PRI card only)
NB 1 The maximum combined trunk and extension capacities for HiPath 3350
and 3550 will depend on individual configurations.
NB 2 The maximum combined TDM corded, cordless and IP extension
capacities will depend on individual configurations.
NB 3 ISDN devices connected via S0 bus to be included in extension capacities.
HiPath 3250, 3350 & 3550 V3.0 Vital Statistics
Control Unit Details
Number of Universal Card Slots
HiPath 3250 None (fixed configuration)
HiPath 3350 2
HiPath 3550 6 Plus 1 large format slot
Cabinet size (H * W * D)
HiPath 3250 290mm*365mm* 65mm
HiPath 3350 450mm*460mm*130mm
HiPath 3550 450mm*460mm*200mm
Cabinet weight
HiPath 3250 1.0Kg
HiPath 3350 6.0Kg
HiPath 3550 8.0Kg
Main Distribution Frames (MDF)
Integrated. Uses screw connectors
NB On HiPath 3550 an external box connection will be required if the large format
card is used.
Processor Board Details
System memory
Motorola Coldfire
Maintenance modems
V 24 Ports
Operating Environment
Temperature
Relative humidity
Absolute humidity
Heat emission
16Mbit Memory Module
System CPU
Integrated digital (ISDN) modem
Optional V32 bis 14.4Kbits analogue
modem (N/A HiPath 3250)
HiPath 3250 1 (9 way D)
HiPath 3350/3550 2 (9 way D plus
optional 24 way D)
+5 to +40 degrees C
5 to 80%
2 to 25 g H20/m3
HiPath 3250 37KJ/h
HiPath 3350 180KJ/h
HiPath 3550 360KJ/h
NB Control units use conventional convection cooling.
HiPath 3250, 3350 & 3550 V3.0 Vital Statistics
Power Requirements
Rated input voltage
Rated frequency
Power consumption
100/240V AC
50/60 Hz
HiPath 3250 25 Watts maximum
HiPath 3350 90 Watts maximum
HiPath 3550 180 Watts maximum
A clean dedicated mains supply is required terminating on a 13 amp socket (in
accordance with IEEE regulations). Mains plugs should be fitted with a 3 Amp
fuse.
UPS Battery Specifications
Battery Capacity
HiPath 3250 N/A
HiPath 3350 48V - 1.2 Ah
HiPath 3550 48V - 1.2 Ah
Battery back up times
HiPath 3350 30 minutes (average config)
HiPath 3550 15 minutes (average config)
Telecommunications Earth
A Telecommunications earth is not required.
Cable Specifications and Distances for TDM devices
Standard 0.5mm twisted pair cable.
Single pair required by both analogue and digital (optiPoint 500) telephones.
Maximum distance optiPoint 500 - 500 metres (extended to 1000 metres with plug
in PSU).
Maximum distance optiPoint Master to optiPoint / analogue slave - 100 metres.
Maximum distance analogue device - 1000 metres.
Maximum distance S0 Bus - up to 150 metres, point to multipoint. 600 metres
point to point.
Maximum distance DECT base station - 1000 metres
HiPath 3250, 3350 & 3550 V3.0 Vital Statistics
Trunk Specifications
HiPath 3250
Digital
Analogue
HiPath 3350
Digital
Analogue
HiPath 3550
Digital
Analogue
BRI (ISDN 2e)
Not available
BRI (ISDN 2e)
Loop Calling Unguarded Clear
Loop Disconnect or DTMF signalling
BRI (ISDN 2e). PRI (ISDN 30e)
Loop Calling Unguarded Clear
Loop Disconnect or DTMF signalling
Extension Specifications
Digital
2B + D using Siemens UPOE protocol
Analogue
DTMF / Loop Disconnect. Timed Break Recall (TBR)
Tie Line Specifications
Digital
(N/A 3250)
Analogue
Siemens CorNet N and QSIG
Not available
CE Compliance
Electromagnetic Compatibility
DECT
EN 50082-1
ETS 300, 329. TBR 06
Safety
International
IEC 60950 + A1 + A2 + A3 + A4
s
HiPath 3300 & 3500 V3.0
Vital Statistics
HiPath 3300 & 3500 V3.0 Vital Statistics
Detailed below is information on the physical build and specifications for Version 3
of the HiPath 3300 and 3500 rack mounted voice servers which should be useful
when responding to tenders etc.
Maximum Capacities
The following figures exclude extensions connected via adapters.
HiPath 3300
Maximum corded (TDM) extensions
Maximum cordless (TDM) extensions
Maximum IP extensions
Maximum trunks
28
16
96
16
HiPath 3500
Maximum corded (TDM) extensions
Maximum cordless (TDM) extensions
Maximum trunks
Maximum IP extensions
52
32
60 (one PRI card only)
192
NB 1 The combined maximum trunk and extension capacities will depend on
individual configurations. NB 2 The combined maximum TDM corded, cordless
and IP extension capacities will depend on individual configurations.
NB 3 ISDN devices connected via S0 Bus to be included in extension capacities.
Control Unit Details
Number of universal card slots
Cabinet Size (H * W * D)
Cabinet Weight
HiPath 3300
HiPath 3500
HiPath 3300
HiPath 3500
HiPath 3300 2
HiPath 3500 6
89mm*440mm*380mm (2U)
155mm*440mm*380mm (4U)
6KG (fully configured)
8 KG (fully configured)
NB Systems are designed to be mounted in a standard 19-inch rack.
HiPath 3300 & 3500 V3.0 Vital Statistics
Main Distribution Frames (MDF)
All trunk and extensions pre-terminated on integrated RJ45 sockets.
Processor Board Details
V24 Ports
System memory
System CPU
Maintenance modems
1 (9 way)
16Mbit Memory Module
Motorola Coldfire
Integrated digital (ISDN) modem
Optional V32 bis 14.4Kbits analogue modem
Operating Environment
Temperature
Relative humidity
Absolute humidity
Heat emission
+5 to +40 degrees C
5 to 80%
2 to 25g H20/m3
HiPath 3300 180KJ/h
HiPath 3500 360KJ/h
NB Systems uses fan assisted cooling.
Power Requirements
Rated input voltage
Rated frequency
Power consumption
100/240V AC.
50/60 Hz.
HiPath 3300 90 watts
HiPath 3500 180 watts
A clean dedicated mains supply is required terminating on a 13 Amp socket (in
accordance with IEEE regulations). Mains Plugs should be fitted with a 3 Amp
fuse.
HiPath 3300 & 3500 V3.0 Vital Statistics
UPS Battery Specifications
Battery size (H * W * D)
155mm*440mm*380mm (4U)
Battery capacity
7 Ampere hour
Output voltage
48 Volts
Battery back up times
HiPath 3300 4 hours 40 minutes (average config)
HiPath 3500 2 hours 20 minutes (average config)
Rack Earthing: Earthing of the 19-inch rack must be in accordance with the
latest edition of IEE regulations.
Cable Specifications and Distances for TDM devices
Standard 0.5mm twisted pair cable.
Single pair required by both analogue and digital (optiPoint 500) telephones.
Maximum distance optiPoint 500 - 500 metres (extended to 1000 metres with plug
in PSU). Maximum distance optiPoint 500 Master to optiPoint 500 / analogue
slave - 100 metres.
Maximum distance analogue device - 1000 metres. Maximum distance S0 Bus up to 150 metres point to multipoint. 600 metres point to point.
Maximum distance DECT base station - 1000 metres.
Trunk Specifications
HiPath 3300 Digital: BRI (ISDN 2e) Analogue: Loop Calling Unguarded Clear
HiPath 3500 Digital: BRI (ISDN 2e). PRI (ISDN 30e)
Analogue: Loop Calling Unguarded Clear
Extension Specifications
Digital: 2B + D using Siemens UPOE protocol.
Analogue: DTMF / Loop Disconnect. Timed Break Recall (TBR).
Tie Line Specifications
Digital:
QSIG Analogue :
CE Compliance:
Electromagnetic Compatibility
DECT
Safety - International
Siemens CorNet N
Not available
EN 50082-1
ETS 300, 329. TBR 06
IEC 60950 + A1 + A2 + A3 + A4
s
HiPath 3700 & 3750 V3.0
Vital Statistics
HiPath 3700 & 3750 V3.0 Vital Statistics
Detailed below is information on the physical build and connection specifications
for Version 3.0 of the HiPath 3700 (19-inch rack mount) and 3750 (floor mount)
which should be useful when responding to tenders etc.
Max. Capacity (3700 and 3750)
Maximum number of TDM corded extensions
Maximum number of TDM cordless extensions
Maximum number of IP extensions
Overall maximum number of extensions
Maximum number of trunks
Maximum data devices
Cabinet Details (3700 and 3750)
Maximum number of cabinets
Number of universal slots per cabinet
Cabinet one
Cabinets two and three
Cabinet size (H * W * D)
Cabinet weight (fully equipped)
384
250
500
500
120 (Exchange /Tie / S0)
50 (Data / ISDN Adapters)
3
7
8
490mm * 410mm * 390mm ((11U)
22KG
NB1 HiPath 3700 cabinets are designed to be mounted in a standard 19inch rack.
NB2 If HiPath 3700 cabinets are installed in two separate racks then racks
need to be installed next to each other to facilitate inter cabinet cabling.
NB3 HiPath 3750 cabinets can be either floor or shelf mounted (not wall
mounted).
HiPath 3700 & 3750 V3.0 Vital Statistics
Main Distribution Frames (MDF) for HiPath 3750
Option 1
One wall mounted MDF required per cabinet (MDFU).
MDF size
370mm H * 330mm W * 130mm D
Option 2
Single wall mounted MDF supporting up 3 cabinets (MDFU-E).
MDF size
670mm H * 330mm W * 130mm D
NB HiPath 3700 uses RJ45 Patch Panels
Processor Board Details
V24 Ports
System memory
System CPU
Maintenance modems
Operating Environment
Temperature
Relative humidity
Absolute humidity
Heat emission
2 (1*9 way and 1*24 way D)
16Mbit Memory Module
Motorola Coldfire
Integrated digital (ISDN) modem
Optional V32 bis 14.4Kbits analogue modem
+5 to +40 degrees C
5 to 80%
2 to 25 g H20/m3
850 kJ/h per cabinet (maximum)
NB It is recommended that the 19-inch rack should use fan assisted cooling.
Power Requirements
Rated input voltage
Rated frequency
Power consumption
100/240V AC
50/60 Hz
430 Watts per cabinet (maximum)
A clean dedicated mains supply is required terminating on a double 13 Amp
socket (in accordance with IEEE regulations).
An additional 13 Amp socket is required for each expansion cabinet. Mains
plugs to be fitted with a 13 Amp fuse.
HiPath 3700 & 3750 V3.0 Vital Statistics
UPS Battery Specifications
Each cabinet is supplied with an uninterrupted power supply requiring connection
to an optional battery pack.
Battery capacity
7 Ampere hour
Output voltage
48 Volts
Battery backup times
10 to 20 extensions
110 minutes
21 to 40 extensions
80 minutes
41 to 68 extensions
60 minutes
69 to 80 extensions
50 minutes
Earthing
HiPath 3700
The 19-inch rack must be earthed in accordance with
the latest edition of IEE regulations.
HiPath 3750
A telecommunications earth of at least 2.5mm sq. is
required.
Cable Specifications and Distances for TDM devices
Standard 0.5mm twisted pair cable.
Single pair required by both analogue and digital (optiPoint 500) telephones.
Maximum distance optPoint 500 - 500 metres (extended to 1000 metres with
plug in PSU).
Maximum distance optiPoint 500 master to optiPoint 500 / analogue slave - 100
metres.
Maximum distance analogue device - 1000 metres.
Maximum distance S0 Bus - up to 150 metres point to multipoint. 600 metres
point to point.
Maximum distance DECT base station - 1000 metres.
Trunk Specifications
Digital: BRI (ISDN 2E), PRI (ISDN 30E), (DASS)
Analogue: Loop calling Unguarded Clear /Loop Disconnect or DTMF signalling.
HiPath 3700 & 3750 V3.0 Vital Statistics
Extension Specifications
Digital: 2B + D using Siemens UPOE protocol
Analogue: DTMF / Timed Break Recall (TBR)
Tie Line Specifications
Digital:
Analogue:
Siemens Cornet N and QSIG
DC5 (E&M) 2 or 4 wire audio
CE Compliance
Electromagnetic Compatibility
DECT
EN 50082-1
ETS 300, 329. TBR 06
Safety
International
IEC 60950 + A1 + A2 + A3 + A4