Marmitek Switchgear: Connect310 User manual

Add to my manuals
40 Pages

advertisement

Marmitek Switchgear: Connect310 User manual | Manualzz
connect 310
connect
310
™
HDMI
SWITCHER
HDMI SWITCHER
USER MANUAL
3
GEBRAUCHSANLEITUNG 9
Guide Utilisateur
15
MODO DE EMPLEO
21
MANUALE D’ISTRUZIONE27
GEBRUIKSAANWIJZING 33
20275/20080811 • CONNECT 310™ HDMI SWITCHER
ALL RIGHTS RESERVED MARMITEK ©
© MARMITEK
ENGLISH
SAFETY WARNINGS
• T o prevent short circuits, this product should only be used inside and only in dry spaces.
Do not expose the components to rain or moisture. Do not use the product close to a
bath, swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures or bright
light sources.
• In case of improper usage or if you have altered and repaired the product yourself, all
guarantees expire. Marmitek does not accept responsibility in the case of improper usage
of the product or when the product is used for purposes other than specified. Marmitek
does not accept responsibility for additional damage other than covered by the legal
product responsibility.
• This product is not a toy. Keep out of reach of children.
• Do not open the product (battery panel excepted): the device may contain live parts. The
product should only be repaired or serviced by a qualified expert.
• Keep batteries out of the reach of children. Dispose of batteries as chemical waste. Never
use old and new batteries or different types of batteries together. Remove the batteries
when you are not using the system for a longer period of time. Check the polarity (+/-)
of the batteries when inserting them in the product. Wrong positioning can cause an
explosion.
• Only connect the adapter to the mains after checking whether the mains voltage is the
same as the values on the identification tags. Never connect an adapter or power cord
when it is damaged. In that case, contact your supplier.
INTRODUCTION
Congratulations on purchasing the Marmitek Connect310! With this you can connect
up to 3 HDMI sources to your (HD-) TV with just one cable, without any loss of signal or
encryption. Examples of HDMI sources are: HD-DVD player, Blu-ray DVD player, HD-Set top
Box, PlayStation3, Xbox 360, etc. The Connect310 supports resolutions up to 1080p.
The Marmitek products are manufactured with the utmost precision and are of high quality.
Please read this manual first and follow the instructions so you can enjoy the possibilities of
this product optimally.
SET CONTENTS
1x HDMI Switcher
1x Remote control (battery included)
1x Power adaptor
1x Infrared receiver
1x User manual
CONNECT 310™
ADVANTAGES
Connect310
• Connecting 3 HDMI sources with one cable
• Supports up to 1080P HDTV resolution
• HDMI V1.3 certified by ATC (Authorized Test Centers)
• Meets the HDCP standards (High-bandwidth Digital Content Protection)
• Can be placed out of sight and can still be operated with the remote control when using
the external infrared receiver.
HDMI V1.3
• Video bandwidth 225 MHz (makes image reproduction of 1080P, 12-bit and 60Hz
possible)
• Deep Color 12-bit (billions instead of millions colours, better reproduction of subtle
differences in gradation and a higher contrast ratio)
• Dolby TrueHD & DTS HD Master Audio (high quality audio support)
• Lip-Sync (prevents synchronisation problems between image and sound)
• CEC (operate multiple ‘CEC’ devices with just one remote control).
INSTALLATION
1. C
onnect the HDMI cable to your screen (TV, monitor of projector) with the “HDMI
output” of the Connect310.
2. Connect the HDMI cables from your sources to the “HDMI inputs” of the Connect310.
3. Connect the external infrared receiver to the “IR Extender” input of the Connect310 and
mount it somewhere in sight of your remote control. For example up, under or at the side
of your A/V centre. This way you can keep operating the Connect310, even when it is
located in a closed cabinet.
4. Connect the power adaptor to the power connector of the Connect310 and connect to
the mains.
Remark 1:
In most cases the Connect310 operates without power adaptor. Standard all HDMI cables
are equipped with a 5V power pin, but unfortunately not all HDMI sources support this
functionality. So it depends on your HDMI sources if connecting the power adaptor to the
Connect310 is necessary. You can test this by simply disconnecting the power adaptor from
the Connect310 and see if it is still functioning properly.
Remark 2:
Use only category 2 HDMI certified cables for the best quality in image and sound.
© MARMITEK
ENGLISH
Battery
Remove the plastic strip from the battery compartment to activate the battery and use the
remote control.
USING THE SWITCHER
Switching between the connected HDMI sources
Automatically
When one of the HDMI sources is switched on, the Connect310 will automatically switch to
the correct input channel. If multiple HDMI sources are already switched on, the Connect310
will automatically switch to the last HDMI source activated.
­
Remark: Automatic switching has to be supported by the HDMI source.
With the selection button on the switcher
With the Select button at the top of the panel you can manually switch between the various
HDMI sources.
With the remote control
Point the remote control at the external infrared receiver of the Connect310 and press the
number that corresponds with the desired HDMI source.
The LED lighting on top of the panel shows which source is selected.
FREQUENTLY ASKED QUESTIONS
No (or poor) image and sound
If you experience poor or no image after connecting the HDMI switcher, try to recover the
problem by connecting the devices one at the time to your screen (TV, monitor or projector).
This way you can determine whether the problem lies with the HDMI sources, the HDMI
cables, the HDMI switcher or the screen. HDMI devices which are not tested and certified by
ATC (Authorized Test Centers) can cause image and sound problems.
• C
heck if the power adaptor of the Connect310 is connected and plugged into the
mains.
• Use HDMI certified cables of the highest quality (category 2 HDMI certified).
• Do not use HDMI cables that are longer than specified in the technical data.
• Both the HDMI source and your screen have to support HDMI fully.
• Check whether your HDMI sources, DVI device and screen support the copy protection
HDCP (High-bandwidth Digital Content Protection).
CONNECT 310™
Remote control does not work
• You should point the remote control at the external infrared receiver, not at the switcher.
• Infrared signals have a maximum reach of approximately 10 metres. Try a shorter distance.
• Replace the battery in the remote control, it could be empty.
Do you still have questions? Please check out www.marmitek.com for more information.
TECHNICAL DATA
Resolution
Supported HDTV Resolutions
480p, 576i, 576p, 720p, 1080i, 1080p
Supported PC Resolution (max) 1920 x 1200
Maximal Pixel Frequency (max) 225 MHz
Maximal Bit Rate (max) 2.25 Gbps
In- and outputs
HDMI Input (19-pin female)
3 HDMI
HDMI Output (19-pin female)
1 HDMI
Maximal HDMI cable length
15 metres
Remote control
Infrared remote control
Battery included CR2025
Housing Switcher
Dimensions (H x W x D) 80 x 18 x 58mm
Weight
250 g
Ambient
Ambient temperature
+0 to +40° C
Ambient humidity
10% to 85%
Power
External power adaptor
Input: 100-240VAC @50-60Hz Output: 5VDC @ 300mA
Specifications may be modified without prior notice.
OPTIONAL ACCESSORIES
Infrared extension
Marmitek offers several products to operate your devices, even when these are placed in a
closed cupboard or in a different room. This as well wired as wireless. More information about
these so called infrared extenders can be found at www.marmitek.com.
Extra remote control
If you want to operate your device from various places in your home, or if you want to use just
one single remote control for all your A/V devices, then make your choice from the complete
range of Marmitek universal remote controls; EasyControl or EasyTouch. These replace almost
© MARMITEK
ENGLISH
every remote control you are using at the moment. More information about these so called
universal remote controls can be found at www.marmitek.com
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its
packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product
should be disposed of separately from regular household waste streams. It is your responsibility to dispose
of this and other electric and electronic equipment via designated collection facilities appointed by the government or
local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment
and human health. For more detailed information about the disposal of your old equipment, please contact your local
authorities, waste disposal service, or the shop where you purchased the product.
CONNECT 310™
© MARMITEK
SICHERHEITSHINWEISE
DEUTSCH
• U
m Kurzschluss vorzubeugen, dieses Produkt bitte ausschließlich innerhalb des Hauses
und nur in trockenen Räumen nutzen. Setzen Sie die Komponenten nicht Regen oder
Feuchtigkeit aus. Nicht neben oder nahe eines Bades, Schwimmbades usw. verwenden.
• Setzen Sie die Komponente Ihres Systems nicht extrem hohen Temperaturen oder starken
Lichtquellen aus.
• Bei einer zweckwidrigen Verwendung, selbst angebrachten Veränderungen oder selbst
ausgeführten Reparaturen verfallen alle Garantiebestimmungen. Marmitek übernimmt
bei einer falschen Verwendung des Produkts oder bei einer anderen Verwendung des
Produktes als für den vorgesehenen Zweck keinerlei Produkthaftung. Marmitek übernimmt
für Folgeschäden keine andere Haftung als die gesetzliche Produkthaftung.
• Dieses Produkt ist kein Spielzeug. Außer Reichweite von Kindern halten.
• Das Produkt niemals öffnen (ausgen.des Batteriefachs): Das Gerät kann Teile enthalten,
worauf lebensgefährliche Stromspannung steht. Überlassen Sie Reparaturen oder
Wartung nur Fachleuten.
• Halten Sie die Batterien außerhalb der Reichweite von Kindern. Liefern Sie die Batterien als
chemischen Kleinabfall ein. Verwenden Sie niemals alte und neue oder unterschiedliche
Typen von Batterien durcheinander. Wenn Sie das System längere Zeit nicht benutzen,
entfernen Sie die Batterien. Achten Sie beim Einlegen der Batterien auf die Polarität (+ / -):
Ein falsches Einlegen kann zu Explosionsgefahr führen.
• Schließen Sie den Netzadapter erst dann an das Stromnetz an, nachdem Sie überprüft
haben, ob die Netzspannung mit dem auf dem Typenschild angegeben Wert übereinstimmt.
Schließen Sie niemals einen Netzadapter oder ein Netzkabel an, wenn diese beschädigt
sind. In diesem Fall nehmen Sie Kontakt mit Ihrem Lieferanten auf.
EINFÜHRUNG
Herzlichen Glückwunsch mit dem Erwerb des Marmitek Connect310. Mit diesem Switch
schließen Sie mit nur einem Kabel bis zu 3 HDMI Quellen an Ihren (HD-)TV an, ohne jeglichen
Signal- oder Verschlüsselungsverlust. Beispiele von HDMI Quellen sind: HD-DVD Player,
Blu Ray DVD-Player, HD-Digitalempfänger, PlayStation3, XBox360 usw. Der Connect310
unterstützt Auflösungen bis zu 1080P.
Die Produkte Marmiteks werden mit großer Sorgfalt hergestellt und sind von hoher Qualität.
Lesen Sie diese Anleitung bitte sorgfältig durch um befolgen Sie die Anweisungen, um die
Möglichkeiten dieses Produkts optimal nutzen zu können.
VERPACKUNGSINHALT
1x HDMI Switch
1x Fernbedienung (inkl. Batterie)
1 x Speisungsadapter
1x Infrarot-Empfänger
1 x Gebrauchsanleitung
CONNECT 310™
VORZÜGE
Connect310
• 3 HDMI Quellen mit 1. Kabel anschließen
• Unterstützt bis zu 1080P HDTV Auflösung
• HDMI V1.3 geprüft von ATC (Authorized Test Centers)
• Entspricht den HDCP-Anforderungen (High bandwidth Digital Content Protection)
• Aufstellung außer Sicht und mithilfe des externen Infrarot-Empfängers dennoch über
Fernbedienung zu bedienen.
HDMI V1.3
• Videobandbreite 225 MHz (ermöglicht Bildwiedergabe von 1080P, 12-BIT und 60Hz).
• Deep Color 12-BIT (Milliarden anstelle von Millionen Farben, bessere Wiedergabe von
subtilen Farbwertunterschieden und höheres Kontrastverhältnis)
• Dolby TrueHD & DTS HD Master Audio (hohe Qualität Audio-Unterstützung)
• Lip-Sync (verhindert Synchronisationsprobleme zwischen Bild und Ton )
• CEC (mehrere ‘CEC’ Geräte mit nur einer Fernbedienung steuern).
INSTALLATION
1. S
chließen Sie das HDMI Kabel zu Ihrem Bildschirm (TV, Monitor oder Projektor) an den
“HDMI output” des Connect310 an.
2. Schließen Sie die HDMI Kabel Ihrer Quellen an die “HDMI inputs” des Connect310 an.
3. Schließen Sie den externen Infrarot-Empfänger an den “IR Extender” Anschluss
des Connectt310 an und montieren Sie diesen beliebig, jedoch in Sichtweite Ihrer
Fernbedienung. Beispielsweise auf, unter oder seitlich Ihres Stereoschranks. Somit können
Sie den Connect310 auch bedienen, wenn sich dieser in einem verschlossenen Schrank
befindet.
4. Schließen Sie den Speisungsadapter an den Kontakt des Connect310 an und verbinden
Sie diesen mit der Steckdose.
Anmerkung 1:
In den meisten Fällen ist der Connect310 auch ohne Speisungsadapter funktionsfähig.
Alle HDMI Kabel sind standardmäßig mit einem 5V Speisungsstift versehen, aber leider
unterstützen nicht alle HDMI Quellen diese Funktionalität. Es hängt also von Ihren HDMI
Quellen ab, ob der Anschluss des Speisungsadapters an den Connect310 erforderlich ist. Sie
können dies einfach testen, indem Sie den Speisungsadapter vom Connect310 lösen und
dann schauen, ob der Connect310 weiterhin ordnungsgemäß funktioniert
Anmerkung 2:
Verwenden Sie zum Erhalt einer optimalen Bild- und Tonqualität ausschließlich Kategorie 2
HDMI geprüfte Kabel.
10
© MARMITEK
Batterie
Ziehen Sie den Plastikstreifen aus dem Batteriefach um die Batteie zu aktivieren und die
Fernbedienung nutzen zu können.
ANWENDUNG
Automatisch
Wird eine der HDMI Quellen eingeschaltet, so wird der Connect310 automatisch zum
richtigen Eingangskanal schalten. Sind mehrere HDMI Quellen bereits eingeschaltet, so wird
der Connect310 automatisch zur letztmals aktivierten HDMI Quelle schalten.
­
Bemerkung: Automatisches Schalten muss jedoch durch die HDMI Quelle unterstützt
werden.
Mit der Wahltaste des Switch
Mit der Wahltaste oben auf dem Bedienfeld kann zwischen den verschiedenen HDMI Quellen
manuell geschaltet werden. Mit der Fernbedienung
Richten Sie die Fernbedienung auf den externen Infrarot-Empfänger des Connect310 und
drücken Sie auf die mit der gewünschten HDMI Quelle übereinstimmende Nummer.
Die LED Beleuchtung auf der Oberseite des Bedienfelds zeigt an, welche Quelle gewählt
wurde.
HÄUFIG GESTELLTE FRAGEN
Kein (oder schlechtes) Bild und Ton
Wenn Sie nach dem Anschließen des HDMI Switch kein, oder ein schlechtes Bild empfangen,
versuchen Sie dann die Geräte Stück für Stück an Ihren Schirm anzuschließen (TV, Monitor
oder Projektor), um zu sehen, wo das Problem liegt. Auf diese Art können Sie ermitteln ob
es an den HDMI Quellen, den HDMI Kabeln, dem HDMI Switch oder dem Schirm liegt. Nicht
von ATC (Authorized Test Centers) erprobte und geprüfte HDMI Geräte können Bild- und
Tonprobleme verursachen.
• P rüfen Sie, ob der Speisungsadapter des Connect310 angeschlossen und mit der Steckdose
verbunden ist
• Verwenden Sie hochwertige, HDMI geprüfte Kabel (Kategorie 2 HDMI geprüft)
• Verwenden Sie keine HDMI Kabel, die länger sind als in den technischen Daten
aufgeführt
CONNECT 310™
11
DEUTSCH
Schalten zwischen den angeschlossenen HDMI Geräten.
• Sowohl die HDMI Quelle wie Ihr Bildschirm muss HDMI vollständig unterstützen
• Prüfen Sie, ob Ihre HDMI Quellen, Ihr DVI Gerät und Schirm den Kopierschutz HDCP (High
bandwidth Digital Content Protection) unterstützen
Fernbedienung funktioniert nicht
• Richten Sie die Fernbedienung auf den externen Infrarot-Empfänger und nicht auf den
Switch
• Infrarotsignale haben eine Höchstreichweite von ca. 10 Metern. Testen Sie mit kürzeren
Entfernungen
• Ersetzen Sie die Batterie der Fernbedienung, diese kann leer sein
Haben Sie noch immer Fragen? Besuchen Sie www.marmitek.com.
TECHNISCHEN DATEN
Auflösung
Unterstützte HDTV Auflösungen
480p, 576i, 576p, 720p, 1080i, 1080p
Unterstützte PC Auflösung (max.) 1920 x 1200
Maximale Bildpunktfrequenz (max.) 225 MHz.
Maximale Bit-Übertragungsgeschwindigkeit (max.) 2.25 GBpS.
Ein- und Ausgänge
HDMI Eingang (19-Buchsenkontakt)
3 HDMI
HDMI Ausgang (19-Buchsenkontakt)
1 HDMI
Höchstlänge HDMI Kabel
15 Meter
Fernbedienung
Infrarot Fernbedienung
Einschließlich Batterie CR2025
Switch-Gehäuse
Maßangaben (H x B x T)
80 x 18 x 58mm
Gewicht:
250 g
Umgebung
Umgebungstemperatur
+0 to +40° C
Relative Feuchte
10% bis 85%
Speisung:
Externer Speisungsadapter
Input:100-240VAC @50-60Hz
Output: 5VDC @300mA
Spezifikationen können ohne vorhergehende Mitteilung geändert werden.
12
© MARMITEK
OPTIONAL ERHÄLTLICH
Extra Fernbedienung
Wenn Sie Ihre Geräte gerne an verschiedenen Orten im Haus bedienen, oder nur noch eine
Fernbedienung für all Ihre A/V Geräte verwenden möchten, entscheiden Sie sich dann für
eine Universal-Fernbedienung aus der kompletten Marmitek Serie; der EasyControl oder
EasyTouch. Diese ersetzen nahezu alle derzeit von Ihnen verwendeten Fernbedienungen.
Weitere Infos über diese so genannten Universal-Fernbedienungen finden Sie unter op www.
marmitek.com.
Umweltinformation für Kunden innerhalb der Europäischen Union
Die Europäische Richtlinie 2002/96/EC verlangt, dass technische Ausrüstung, die direkt am Gerät und/oder an
der Verpackung mit diesem Symbol versehen ist nicht zusammen mit unsortiertem Gemeindeabfall entsorgt
werden darf. Das Symbol weist darauf hin, dass das Produkt von regulärem Haushaltmüll getrennt entsorgt
werden sollte. Es liegt in Ihrer Verantwortung, dieses Gerät und andere elektrische und elektronische Geräte über die
dafür zuständigen und von der Regierung oder örtlichen Behörden dazu bestimmten Sammelstellen zu entsorgen.
Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei, potentielle negative Folgen für Umwelt und die menschliche
Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer Altgeräte benötigen, wenden Sie sich
bitte an die örtlichen Behörden oder städtischen Entsorgungsdienste oder an den Händler, bei dem Sie das Produkt
erworben haben.
CONNECT 310™
13
DEUTSCH
Infrarotverlängerung
Marmitek bietet eine Vielzahl von Produkten an, die die Bedienung Ihrer Geräte ermöglichen,
auch wenn diese sich in einem geschlossenen Schrank oder einem anderen Raum befinden.
Diese Lösungen sind mit Kabel oder kabellos erhältlich. Weitere Informationen zu diesen
Infrarotverlängerungen finden Sie auf www.marmitek.com.
14
© MARMITEK
• A
fin d’éviter un court-circuit, ce produit ne doit être utilisé qu’à l’intérieur, et uniquement
dans des endroits secs. Ne pas exposer les composants à la pluie ou à l’humidité. Ne pas
utiliser à côté de ou près d’une baignoire, une piscine, etc.
• Ne pas exposer les composants de votre système à des températures extrêmement élevées
ou à des sources de lumières trop fortes.
• Toute utilisation impropre, toute modification ou réparation effectuée vous-même
annule la garantie. Marmitek n’accepte aucune responsabilité dans le cas d’une utilisation
impropre du produit ou d’une utilisation autre que celle pour laquelle le produit est
destiné. Marmitek n’accepte aucune responsabilité pour dommage conséquent, autre que
la responsabilité civile du fait des produits.
• Ce produit n’est pas un jouet et doit être rangé hors de la portée des enfants.
• Ne jamais ouvrir le produit (excepté le compartiment des piles) : Les appareils peuvent
comprendre des composants dont la tension est mortelles. Les réparations ou l’entretien
ne doivent être effectués que par des personnes compétentes.
• Tenir les piles hors de portée des enfants. Traiter les piles usagées comme des petits
déchets chimiques. Ne jamais utiliser simultanément des vieilles piles et des piles neuves,
ou des piles de types différents. Enlever les piles lorsque le système sera mis longtemps
hors de service. Respecter la polarité en insérant les piles (+/-) : une insertion incorrecte
peut engendrer un danger d’explosion.
• Brancher l’adaptateur secteur sur le réseau électrique seulement après avoir vérifié que la
tension d’alimentation correspond à la valeur indiquée sur les plaques d’identification. Ne
jamais brancher un adaptateur secteur ou un cordon d’alimentation lorsque celui-ci est
endommagé. Dans ce cas, veuillez contacter votre fournisseur.
INTRODUCTION
Merci d’avoir acheté Connect310 de Marmitek ! Vous pouvez raccorder jusqu’à 3 sources
HDMI avec 1 câble à votre télévision (HD), sans aucune perte de signal ou de chiffrement.
Des exemples de sources HDMI sont : lecteur HD-DVD, lecteur DVD Blu-ray, Settop Box HD,
PlayStation3, Xbox 360, etc. Connect310 soutient les résolutions jusqu’à 1080p.
Les produits de Marmitek ont été produits avec beaucoup de soin et sont de haute qualité.
Veuillez lire ce mode d’emploi avec attention et suivre les instructions afin de bénéficier au
maximum des possibilités de ce produit.
CONTENU DE L’EMBALLAGE
1 x interrupteur HDMI
1 x télécommande (pile incluse)
1 x adaptateur d’alimentation
1 x récepteur infrarouge
1 x mode d’emploi
CONNECT 310™
15
FRANÇAIS
AVERTISSEMENTS DE SECURITE
AVANTAGES
Connect310
• Permet de raccorder 3 sources HDMI avec un câble
• Soutient les résolutions télévision à haute définition jusqu’à 1080P
• HDMI V1.3 certifié par ATC (Authorized Test Centers)
• Répond aux normes HDCP (High-bandwidth Digital Content Protection)
• Peut être placé hors de vue et pourtant se manie par télécommande à l’aide du récepteur
infrarouge externe.
HDMI V1.3
• Largeur de la bande vidéo 225 MHz (image visible de 1080P, 12-bit et 60Hz)
• Deep Color 12-bit (des milliards de couleurs au lieu de millions de couleurs, meilleure
reproduction de différences de niveau subtiles et d’un rapport de contraste plus élevé)
• Dolby TrueHD & DTS HD Master Audio (haute qualité de soutien audio)
• Lip-Sync (prévient les problèmes de synchronisation entre l’image et le son)
• CEC (manier plusieurs appareils ‘CEC’ avec une télécommande).
INSTALLATION
1. R
accordez le câble HDMI vers votre écran (téléviseur, moniteur ou projecteur) à la sortie
HDMI (HDMI output) de Connect310.
2. Raccordez les câbles HDMI de vos sources aux entrées HDMI (HDMI inputs) de
Connect310.
3. Raccordez le récepteur infrarouge au raccordement “IR Extender” de Connect310 et
placez-le quelque part en vue de votre télécommande. Par exemple sur, sous ou sur le
côté de votre meuble A/V. Ainsi vous pouvez continuer à faire fonctionner Connect310,
même si celui-ci se trouve dans une armoire fermée.
4. Raccordez l’adaptateur d’alimentation au raccordement d’alimentation de Connect310 et
branchez la prise.
Remarque 1 :
Dans la plupart des cas Connect310 marche aussi sans adaptateur d’alimentation. Normalement
tous les câbles HDMI sont pourvus d’une goupille d’alimentation 5V, mais malheureusement
toutes les sources HDMI ne supportent pas cette fonction. Ca dépend donc de vos sources
HDMI s’il est nécessaire de raccorder l’adaptateur d’alimentation à Connect310. Vous pouvez
vérifier simplement en séparant l’adaptateur d’alimentation de Connect310 et en essayant si
celui-ci continue à fonctionner comme il faut.
Remarque 2 :
Utilisez uniquement des câbles de catégorie 2 HDMI pour une excellente qualité de l’image et du son.
16
© MARMITEK
Pile
Tirez la bande en plastique hors de la case de la pile pour activer la pile et pouvoir utiliser la
télécommande.
UTILISATION
Avec le bouton de sélection sur l’interrupteur
Avec le bouton de sélection sur le dessus du panneau l’on peut passer manuellement entre
les différentes sources HDMI.
Avec la télécommande
Dirigez la télécommande vers le récepteur infrarouge externe de Connect310 et appuyez sur
le chiffre correspondant à la source HDMI désirée.
L’éclairage LED sur le dessus du panneau indique quelle source a été choisie.
FOIRE AUX QUESTIONS
Pas d’image (ou image floue) ou pas de son (ou mauvais son)
S’il n’y a pas d’image ou si l’image est floue après avoir raccordé l’interrupteur HDMI, essayez
de voir quel est le problème en raccordant les appareils un par un à votre écran (téléviseur,
moniteur ou projecteur). De cette manière vous pouvez déterminer si le problème se trouve
dans l’une des sources HDMI, les câbles HDMI, l’interrupteur HDMI ou l’écran. Les appareils
HDMI qui ne sont pas testés et certifiés par ATC (Authorized Test Centers) peuvent causer
des problèmes d’image et de son.
• Vérifiez que l’adaptateur d’alimentation de Connect310 soit raccordé et branché.
• Utilisez des câbles certifiés HDMI de la plus haute qualité (catégorie 2 HDMI certifiée). • N’utilisez pas de câbles HDMI qui soient plus longs que spécifié dans les caractéristiques
techniques.
• La source HDMI ainsi que votre écran doivent entièrement soutenir HDMI. • Vérifiez que vos sources HDMI, l’appareil DVI et l’écran soutiennent la sécurité de copie
HDCP (High-bandwidth Digital Content Protection).
CONNECT 310™
17
FRANÇAIS
Passer entre les sources HDMI raccordées
Automatiquement
Quand une des sources HDMI est mise en marche, Connect310 passera automatiquement vers
le canal d’entrée correct. Si plusieurs sources HDMI sont déjà mises en marche Connect310
passera automatiquement vers la source HDMI qui a été activée en dernier.
­
Remarque : ce passage automatique entre les sources raccordées doit être soutenu par la
source HDMI.
La télécommande ne fonctionne pas
• Vous devez diriger la télécommande vers le récepteur infrarouge externe, non pas vers
l’interrupteur.
• Les signaux infrarouges ont une portée maximale d’environ 10 mètres. Testez sur une
distance plus courte.
• Changez la pile de la télécommande, celle-ci peut être vide.
Vous avez d’autres questions? Allez sur le site www.marmitek.com
CARACTÉRISTIQUES TECHNIQUES
Résolution
Résolutions soutenant télévision à haute définition Résolution soutenant PC (max) Fréquence pixel maximale (max) Taux binaire maximal (max) Entrées et sorties
Entrée HDMI (19 goupilles femelles)
Sortie HDMI (19 goupilles femelles)
Longueur maximale de câble HDMI
Télécommande
Télécommande infrarouge
Boîtier Interrupteur
Dimensions (H x L x P)
Poids Environnement
Température ambiante
Humidité ambiante
Alimentation
Adaptateur d’alimentation externe
480p, 576i, 576p, 720p, 1080i, 1080p
920 x 1200
225 MHz
2.25 Gbps
3 HDMI
1 HDMI
15 mètres
Pile CR2025 incluse
80 x 18 x 58 mm
250 g
+0 à +40° C
10 % à 85 %
Entrée : 100-240VAC @50-60Hz
Sortie : 5VDC @ 300mA
Spécifications peuvent être modifiées sans préavis.
DISPONIBLE EN OPTION
Rallonge infrarouge
Marmitek offre une diversité de produits qui vous permettent également de manier vos
appareils quand ils se trouvent dans un placard fermé ou même dans une autre pièce. Ceci
est possible avec ou sans câbles. Vous trouverez des renseignements additionnels concernant
ces rallonges infrarouges sur notre site www.marmitek.com
18
© MARMITEK
Télécommande additionnelle
Si vous voulez manier vos appareils depuis plusieurs emplacements de la maison, ou si vous ne
voulez utiliser qu’une seule télécommande pour tous vos appareils A/V, choisissez-en une de
la série complète de télécommandes universelles de Marmitek ; EasyControl ou EasyTouch.
Celles-ci remplacent presque toutes les télécommandes que vous utilisez actuellement. Vous
trouverez des renseignements additionnels concernant ces télécommandes universelles sur le
site www.marmitek.com.
Informations environnementales pour les clients de l’Union européenne
La directive européenne 2002/96/CE exige que l’équipement sur lequel est apposé ce symbole sur le produit
et/ou son emballage ne soit pas jeté avec les autres ordures ménagères. Ce symbole indique que le produit
doit être éliminé dans un circuit distinct de celui pour les déchets des ménages. Il est de votre responsabilité
de jeter ce matériel ainsi que tout autre matériel électrique ou électronique par les moyens de collecte indiqués par le
gouvernement et les pouvoirs publics des collectivités territoriales. L’élimination et le recyclage en bonne et due forme
ont pour but de lutter contre l’impact néfaste potentiel de ce type de produits sur l’environnement et la santé publique.
Pour plus d’informations sur le mode d’élimination de votre ancien équipement, veuillez prendre contact avec les pouvoirs
CONNECT 310™
FRANÇAIS
publics locaux, le service de traitement des déchets, ou l’endroit où vous avez acheté le produit.
19
20
© MARMITEK
AVISOS DE SEGURIDAD
INTRODUCCIÓN
¡Felicidades por la compra del Marmitek Connect310! Con este puede conectar hasta 3
fuentes HDMI a su televisor (HD) con tan solo un cable y sin pérdida de señal o de encripción.
Ejemplos de fuentes HDMI son: reproductores HD-DVD, reproductores DVD Blu-Ray, HD set
top box, PlayStation3, Xbox 360, etc. El Connect310 soporta resoluciones de hasta 1080p.
Los productos de Marmitek se fabrican con todo esmero y son de alta calidad. Por favor lea
cuidadosamente este manual y siga las instrucciones para poder disfrutar óptimamente de
las posibilidades que le ofrece este producto. CONTENIDO DEL EMBALAJE
1x Switcher HDMI
1x Mando a distancia (con pila)
1x Adaptador de alimentación
1x Receptor infrarrojo
1x Modo de empleo
CONNECT 310™
21
ESPAñOL
• P ara evitar un cortocircuito, este producto solamente se usa en casa y en habitaciones
secas. No exponga los componentes del sistema a la lluvia o a la humedad. No se use
cerca de una bañera, una piscina, etc.
• No exponga los componentes del sistema a temperaturas extremamente altas o a focos
de luz fuertes.
• En caso de uso indebido o modificaciones y reparaciones montados por su mismo, la
garantía se caducará. En caso de uso indebido o impropio, Marmitek no asume ninguna
responsabilidad para el producto. Marmitek no asume ninguna responsabilidad para
daños que resultan del uso impropio, excepto según la responsabilidad para el producto
que es determinada por la ley.
• Este producto no es un juguete. Asegúrese de que está fuera del alcance de los niños.
• Nunca abra el producto (a excepción de compartimiento de pilas): Puede contener piezas que
se encuentren bajo una tensión mortal. Deja las reparaciones o servicios a personal experto.
• Ten cuidado que las pilas se encuentran fuera del alcance de niños. Entrega las pilas como
residuos químicos. Nunca use pilas nuevas y viejas o pilas de tipos distintos a la vez. Quita
las pilas si no usa el sistema durante mucho tiempo. Cuando pone las pilas, presta atención
a la polaridad (+ / -): si no son puestas de manera justa, puede causar peligro de explosión.
• No conecte el adaptador de red a la red de alumbrado antes de que haya controlado si la
tensión de red corresponde con el valor indicado en la estampa de tipo. Nunca conecte
un adaptador de red o un cable a la red si ése está dañado. En este caso, por favor entre
en contacto con su proveedor.
AVANTAJES
Connect310
• Conectar 3 fuentes HDMI con tan solo un cable
• Soporta resoluciones HDTV de hasta 1080P
• HDMI V1.3 certificado de los ATC (Authorized Test Centers)
• Responde a las normas de HDCP (High-bandwidth Digital Content Protection)
• Puede colocarse fuera del alcance de la vista y manejarse fácilmente con el mando a
distancia, utilizando el receptor infrarrojo.
HDMI V1.3
• Amplitud de banda de vídeo de 225 MHz (facilita la reproducción de 1080P, 12-bit y
60Hz)
• Deep Color 12-bit (mil millones colores en vez de millones colores, una mejor reproducción
de diferencias sutiles de gradación y una mejor relación de contraste) • Dolby TrueHD & DTS HD Master Audio (soporte de audio de alta calidad)
• Lip-Sync (evita problemas de sincronización de imagen y sonido)
• CEC (manejar varios aparatos ‘CEC’ con un mando a distancia).
INSTALACIÓN
1. Conecte el cable HDMI de la pantalla (TV, monitor o proyector) a la “salida HDMI” del Connect310.
2. Conecte los cables HDMI de las fuentes a las “entradas HDMI” del Connect310.
3. Conecte el receptor infrarrojo externo a la conexión “IR Extender” (extensión IR) del
Connect310 y colóquelo a la vista del mando a distancia, por ejemplo en la parte lateral de
un armario A/V. De esta manera puede manejar el Connect310, aún cuando se encuentra
dentro de un armario cerrado. 4. Conecte el adaptador de alimentación al Connect310 y enchúfelo.
Nota 1:
En la mayoría de los casos el Connect310 funciona también sin adaptador de alimentación.
Normalmente los cables HDMI disponen de una clavija de alimentación de 5V, pero esta
funcionalidad no se soporta de todas las fuentes HDMI. Por tanto, dependiendo de la fuente
HDMI habrá que conectar el adaptador de alimentación al Connect310. Se puede comprobar
si desconecta el adaptador de alimentación del Connect310.
Nota 2:
Utilice exclusivamente cables certificados de categoría 2 HDMI para mejorar la calidad de
imagen y sonido. Pila
Quite la cinta de plástico del compartimiento de la pila para activarla y poder utilizar el mando
a distancia.
22
© MARMITEK
EMPLEO
Conmutar entre si las fuentes HDMI conectadas
Automáticamente
Cuando una de las fuentes HDMI se enciende, el Connect310 conmuta automáticamente
al canal de entrada adecuado. Si varias fuentes HDMI ya están encendidas, el Connect310
conmuta automáticamente a la fuente últimamente activada.
­
Nota: La conmutación automática ha de soportarse por la fuente HDMI.
Con el botón de selección en el switcher
Con el botón de selección en la parte superior del panel puede conmutar manualmente entre
las fuentes HDMI.
Con el mando a distancia
Apunta el mando a distancia hacia el receptor infrarrojo del Connect310 y pulse la cifra de
la fuente HDMI deseada.
El LED en la parte superior del panel indica la fuente seleccionada.
No hay imagen (o hay mala imagen) o no hay sonido (o hay malo sonido)
Si no hay imagen o si la imagen es de baja calidad después de haber conectado el switcher
HDMI, conecte cada aparato a la pantalla (TV, monitor o proyector). De esta manera puede
determinar si el problema es causado por las fuentes HDMI, por los cables HDMI, por el
switcher HDMI o por la pantalla. Aparatos HDMI que no están certificados y comprobados
por los ATC (Authorized Test Centers), pueden causar problemas de imagen y de sonido.
•
•
•
•
•
Compruebe si el adaptador de alimentación del Connect310 está conectado y enchufado.
Utilice cables HDMI certificados de la más alta calidad (categoría 2 HDMI certificado)
No utilice cables más largos de lo indicado en los datos técnicos
Tanto la fuente HDMI como la pantalla han de soportar HDMI
Compruebe si las fuentes HDMI, el aparato DVI y la pantalla soportan la protección contra
copia HDCP (High-bandwidth Digital Content Protection).
El mando a distancia no funciona
• Ha de apuntar el mando a distancia hacia el receptor IR, no hacia el switcher.
• Señales infrarrojas tienen un alcance máximo de 10 metros. Compruébelo desde una
menor distancia.
• Reemplace la pila del mando a distancia, puede estar descargada.
CONNECT 310™
23
ESPAñOL
PREGUNTAS FRECUENTES
¿Tiene otras preguntas? Haga click en www.marmitek.com
DATOS TÉCNICOS
Resolución
Resoluciones HDTV que soportan
Resolución de PC que soporta (máx.) Frecuencia de píxeles máxima (máx.) Bit Rate máxima (máx.) Entradas y salidas
Entrada HDMI (19-pin hembra)
Salida HDMI (19-pin hembra)
Longitud máxima del cable HDMI Mando a distancia
Mando a distancia infrarrojo
Gabinete switcher
Dimensiones (L x A x P)
Peso Ambiente
Temperatura ambiental
Humedad ambiental
Alimentación
Adaptador de alimentación externo
480p, 576i, 576p, 720p, 1080i, 1080p
1920 x 1200
225 MHz
2.25 Gbps.
3 HDMI
1 HDMI
15 metros
Incluso pila CR2025
80 x 18 x 58mm
250g
0 a +40°C
10% a 85%
Input: 100-240VAC @50-60Hz
Output: 5VDC @ 300mA
Las especificaciones pueden modificarse sin previo aviso.
TAMBIÉN A LA VENTA
Extensión infrarroja
Marmitek le ofrece una variedad de productos que le facilita el manejo de sus aparatos aún
cuando se encuentren dentro de un armario cerrado o en otra habitación. Estos productos
existen con o sin cables. Para más información sobre estas extensiones infrarrojas, visite
www.marmitek.com
Mando a distancia adicional
Si desea manejar su equipo desde varios lugares en casa o si quiere emplear un síngulo mando
a distancia para todos los aparatos A/V, Marmitek le ofrece un serie completo de mandos
a distancia universales: EasyControl o EasyTouch. Estos mandos a distancia universales
sustituyen todo mando a distancia que emplea actualmente. Más información sobre los
mandos a distancia puede encontrar en www.marmitek.com.
24
© MARMITEK
Información medioambiental para clientes de la Unión Europea
La Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en
su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el
producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
Es responsabilidad suya desechar este y cualesquiera otros aparatos eléctricos y electrónicos a través de los puntos de
recogida que ponen a su disposición el gobierno y las autoridades locales. Al desechar y reciclar correctamente estos
aparatos estará contribuyendo a evitar posibles consecuencias negativas para el medio ambiente y la salud de las personas.
Si desea obtener información más detallada sobre la eliminación segura de su aparato usado, consulte a las autoridades
ESPAñOL
locales, al servicio de recogida y eliminación de residuos de su zona o pregunte en la tienda donde adquirió el producto.
CONNECT 310™
25
26
© MARMITEK
PRECAUZIONI DI SICUREZZA
• P er evitare il pericolo di cortocircuito utilizzare questo prodotto esclusivamente al coperto
e in luoghi asciutti. Non esporre i componenti di questo prodotto a pioggia o umidità.
Non utilizzare vicino alla vasca da bagno, piscina, ecc.
• Non esporre i componenti del sistema a temperature eccessivamente alte o a fonti intense
di luce.
• In caso di utilizzo scorretto, di riparazioni o modifiche apportate personalmente decade
qualsiasi garanzia. Marmitek declina ogni responsabilità per i danni derivanti da un utilizzo
non appropriato del prodotto o da utilizzo diverso da quello per cui il prodotto è stato
creato. Marmitek declina ogni responsabilità per danni consequenziali ad eccezione della
responsabilità civile sui prodotti.
• Questo prodotto non è un giocattolo: tenerlo lontano dalla portata dei bambini.
• Non aprire mai il prodotto (vano batteria escluso): L’apparecchio può contenere
componenti la cui tensione è estremamente pericolosa. Lasciare fare riparazioni o
modifiche esclusivamente a personale esperto.
• Batterie: conservare le batterie fuori dalla portata dei bambini. Consegnare le batterie agli
appositi centri per lo smaltimento. Non utilizzare mai in combinazione batterie nuove e
vecchie o di tipo diverso. Togliere le batterie quando l’apparecchio non viene utilizzato per
un lungo periodo di tempo. Inserire correttamente le batterie prestando attenzione alla
polarità (+ / -): un errato posizionamento delle batterie può provocare una esplosione.
• Collegare l’alimentatore alla presa di corrente solamente dopo avere controllato che la
tensione della rete elettrica corrisponda alle indicazioni riportate sulla targhetta. Non
utilizzare mai un alimentatore o un cavo elettrico danneggiato. In tal caso rivolgersi al
proprio rivenditore.
INTRODUZIONE
I prodotti di Marmitek sono fabbricati con la massima cura e sono di alta qualità. Vi preghiamo
di leggere attentamente questo manuale e di seguire le istruzioni per sfruttare tutte le
possibilità di questo prodotto.
CONTENUTO DELLA CONFEZIONE
1x Switch HDMI
1x Telecomando (pila inclusa)
1x Adattatore di alimentazione
1x Ricevitore IR
1x Manuale d’uso
CONNECT 310™
27
italiano
Congratulazioni per l’acquisto del Connect310 di Marmitek! Questo rende possibile il
collegamento di fino a tre fonti HDMI tramite un unico cavo al vostro TV (HD), senza perdita
di segnale o encrizione. Esempi di fonti HDMI sono; lettore HD-DVD, lettore Blu Ray-DVD, HDSettop Box, PlayStation3, Xbox 360, ecc. Il Connect310 supporta risoluzioni fino a 1080p.
VANTAGGI
Connect310
• Collegare 3 fonti HDMI tramite 1 cavo
• Supporta risoluzioni HD TV fino a 1080p
• Certificato HDMI V1.3 dagli ATC (Authorized Test Centers)
• Soddisfa le norme HDCP (High-bandwidth Digital Content Protection)
• Si può collocarlo non in vista e nondimeno comandarlo con il telecomando grazie al
ricevitore IR esterno
HDMI V1.3
• Larghezza banda video 225 MHz (rende possibile la riproduzione d’immagini di 1080p,
12-bit e 60Hz)
• Deep Color 12-bit (miliardi di colori in confronto agli attuali milioni, sfumature tra i colori
più ricche ed un livello di contrasto migliore)
• Dolby TrueHD & DTS HD Master Audio (supporto audio di alta qualità)
• Lip-Sync (previene problemi di sincronizzazione tra immagine e suono)
• CEC (comandare più dispositivi ‘CEC’ tramite un unico telecomando).
INSTALLAZIONE
1. C
ollegare il cavo HDMI verso il vostro schermo (TV, monitor o proiettore) all’“output
HDMI” del Connect310.
2. Collegare i cavi HDMI delle vostre fonti agli “input HDMI” del Connect310.
3. Collegare il ricevitore IR esterno alla presa “IR Extender” del Connect310 e montarlo in
qualche posto in vista del vostro telecomando. Per esempio su, sotto o al lato del vostro
mobile A/V. Grazie a ciò è possibile comandare il Connect310, anche se si trova in un
armadio chiuso.
4. Collegare l’adattatore di alimentazione alla presa di alimentazione del Connect310 e
mettere la spina nella presa.
Nota 1:
Nella maggioranza dei casi il Connect310 funziona anche senza adattatore di alimentazione.
Tutti i cavi HDMI sono di serie dotati di un polo di alimentazione a 5V, ma purtroppo non
tutte le fonti HDMI supportano questa funzionalità. Dipende quindi da vostre fonti HDMI se è
necessario il collegamento dell’adattatore di alimentazione al Connect310. Si può facilmente
sperimentarlo scollegando l’adattatore di alimentazione dal Connect310 e poi provare se
continua a funzionare come si deve.
Nota 2:
Usare solo i cavi HDMI certificati nella categoria 2 per la migliore qualità d’immagine e di suono.
28
© MARMITEK
Pila
Tirare la striscia di plastica dal vano pila per attivare la pila e per poter usare il telecomando.
USO
Commutazione tra le fonti HDMI collegate
Automaticamente
Se è stata attivata una delle fonti HDMI, il Connect310 commuterà automaticamente
all’apposito canale d’ingresso. In caso di più fonti HDMI attivate, il Connect310 commuterà
automaticamente alla fonte HDMI attivata per ultimo.
­
Nota: la commutazione automatica deve essere supportata dalla fonte HDMI.
Tramite il selettore sullo switch
È possibile commutare manualmente tra le varie fonti HDMI con il selettore sul lato superiore
del pannello.
Tramite il telecomando
Puntare il telecomando verso il ricevitore IR esterno del Connect310 e premere la cifra che
corrisponde con la fonte HDMI desiderata.
L’illuminazione a LED sul lato superiore del pannello indica quale fonte è stata selezionata.
Manca l’immagine o il suono (o è cattivo)
Se dopo il collegamento dello switch HDMI l’immagine o il suono manca o è cattivo, provare
a individuare il problema collegando uno a uno i dispositivi al vostro schermo (TV, monitor
o proiettore). In tal modo si può determinare se il problema è nelle fonti HDMI, nei cavi
HDMI, nello switch HDMI o nello schermo. I dispositivi HDMI che non sono stati collaudati
e certificati dagli ATC (Authorized Test Centers) possono causare problemi con l’immagine
e il suono.
• C
ontrollare se l’adattatore di alimentazione del Connect310 è collegato e si trova nella
presa.
• Usare i cavi HDMI certificati della qualità più alta (HDMI certificati nella categoria 2)
• Non usare i cavi HDMI più lunghi di quanto riportato nei dati tecnici
• Sia la fonte HDMI che il vostro schermo deve supportare completamente HDMI
• Controllare se le vostre fonti HDMI, dispositivo DVI e schermo supportano la protezione
anticopia HDCP (High-bandwidth Digital Content Protection).
CONNECT 310™
29
italiano
DOMANDE FREQUENTI
Il telecomando non funziona
• Si deve puntare il telecomando verso il ricevitore IR esterno, non verso lo switch.
• I segnali IR hanno una portata massima di circa 10 metri. Provare ad una distanza più
breve.
• Sostituire la pila nel telecomando, può essere scarica.
In caso di ulteriori domande vi preghiamo di visitare il nostro sito www.marmitek.com
CARATTERISTICHE TECNICHE
Risoluzione
Risoluzioni HDTV supportati
480p, 576i, 576p, 720p, 1080i, 1080p
Risoluzione PC supportata (max) 1920 x 1200
Massima frequenza dei pixel 225 MHz
Massima velocità di trasmissione 2.25 Gbps
Ingressi/uscite
Ingresso HDMI (19 poli femmina)
3 HDMI
Uscita HDMI (19 poli femmina)
1 HDMI
Massima lunghezza del cavo HDMI 15 metri
Telecomando
Telecomando a infrarossi
pila CR2025 inclusa
Alloggiamento Switch
Dimensioni (A x L x P)
80 x 18 x 58 mm
Peso 250 g
Ambiente
Temperatura ambiente
+0 ai +40° C
Umidità ambiente
10% all’85%
Alimentazione
Adattatore di alimentazione esterno Input: 100-240VAC @50-60Hz
Output: 5VDC @ 300mA
Le specifiche possono essere soggette a modifiche senza preavviso.
ACCESSORI
Prolunga ad infrarossi
Marmitek offre un vasto assortimento di prodotti che consentono di comandare la propria
apparecchiatura anche quando si trova in un armadio chiuso o in un’altra stanza. Ciò può
avvenire con o senza cavi. Per maggiori informazioni sulle prolunghe ad infrarossi consultare
il sito www.marmitek.com.
30
© MARMITEK
Telecomando addizionale
Se volete comandare le vostre apparecchiature da vari luoghi nella vostra casa, o se volete
usare un solo telecomando per tutte le vostre apparecchiature A/V, scegliete un telecomando
universale dalle serie complete di Marmitek; EasyControl o EasyTouch. Sostituiscono quasi
ogni telecomando che usate ora. Per ulteriori informazioni su questi cosiddetti telecomandi
universali consultare www.marmitek.com.
Informazioni relative all’ambiente per i clienti residenti nell’Unione Europea
La direttiva europea 2002/96/EC richiede che le apparecchiature contrassegnate con questo simbolo sul
prodotto e/o sull’imballaggio non siano smaltite insieme ai rifi uti urbani non differenziati. Il simbolo indica che
questo prodotto non deve essere smaltito insieme ai normali rifi uti domestici. È responsabilità del proprietario
smaltire sia questi prodotti sia le altre apparecchiature elettriche ed elettroniche mediante le specifi che strutture di
raccolta indicate dal governo o dagli enti pubblici locali. Il corretto smaltimento ed il riciclaggio aiuteranno a prevenire
conseguenze potenzialmente negative per l’ambiente e per la salute dell’essere umano. Per ricevere informazioni più
dettagliate circa lo smaltimento delle vecchie apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti pubblici
italiano
di competenza, il servizio di smaltimento rifi uti o il negozio nel quale avete acquistato il prodotto.
CONNECT 310™
31
32
© MARMITEK
VEILIGHEIDSWAARSCHUWINGEN
• O
m kortsluiting te voorkomen, dient dit product uitsluitend binnenshuis gebruikt te
worden, en alleen in droge ruimten. Stel de componenten niet bloot aan regen of vocht.
Niet naast of vlakbij een bad, zwembad, etc. gebruiken.
• Stel de componenten van uw systeem niet bloot aan extreem hoge temperaturen of
sterke lichtbronnen.
• Bij oneigenlijk gebruik, zelf aangebrachte veranderingen of reparaties, komen alle
garantiebepalingen te vervallen. Marmitek aanvaardt geen productaansprakelijkheid bij
onjuist gebruik van het product of door gebruik anders dan waarvoor het product is
bestemd. Marmitek aanvaardt geen aansprakelijkheid voor volgschade anders dan de
wettelijke productaansprakelijkheid.
• Dit product is geen speelgoed. Buiten bereik van kinderen houden.
• Het product nooit openmaken (m.u.v. het batterijvakje): de apparatuur kan onderdelen
bevatten waarop levensgevaarlijke spanning staat. Laat reparatie of service alleen over
aan deskundig personeel.
• Houd batterijen buiten bereik van kinderen. Lever batterijen in als klein chemisch afval.
Gebruik nooit oude en nieuwe batterijen of verschillende typen batterijen door elkaar.
Verwijder de batterijen wanneer u het systeem langere tijd niet gebruikt. Let bij het inleggen
van de batterijen op de polariteit (+ / -): verkeerd inleggen kan explosiegevaar opleveren.
• Sluit de voedingsadapter pas op het lichtnet aan nadat u hebt gecontroleerd of de
netspanning overeenkomt met de waarde die op de typeplaatjes is aangegeven. Sluit een
voedingsadapter of netsnoer nooit aan wanneer deze beschadigd is. Neem in dat geval
contact op met uw leverancier.
INTRODUCTIE
Gefeliciteerd met de aankoop van de Marmitek Connect310! Hiermee kunt u tot 3 HDMI
bronnen met 1 kabel aansluiten op uw (HD-)TV, zonder enig signaal- of encryptieverlies.
Voorbeelden van HDMI bronnen zijn; HD-DVD speler, Blu Ray-DVD speler, HD-Settop Box,
PlayStation3, Xbox 360, etc. De Connect310 ondersteunt resoluties tot 1080p.
De producten van Marmitek worden met grote zorgvuldigheid gemaakt en zijn van hoge
kwaliteit. Leest u a.u.b. deze handleiding nauwlettend door en volg de instructies om
optimaal te genieten van de mogelijkheden van dit product.
NEDERLANDS
INHOUD VAN DE VERPAKKING
1x HDMI Switcher
1x Afstandsbediening (inclusief batterij)
1x Voedingsadapter
1x Infraroodontvanger
1x Gebruiksaanwijzing
CONNECT 310™
33
VOORDELEN
Connect310
• 3 HDMI bronnen aansluiten met 1 kabel
• Ondersteunt tot 1080P HDTV resolutie
• HDMI V1.3 gecertificeerd door ATC (Authorized Test Centers)
• Voldoet aan de HDCP normen (High-bandwidth Digital Content Protection)
• Uit het zicht te plaatsen en toch bedienbaar via de afstandsbediening met behulp van de
externe Infraroodontvanger
HDMI V1.3
• Videobandbreedte 225 MHz (maakt beeld weergave mogelijk van 1080P, 12-bit en
60Hz)
• Deep Color 12-bit (miljarden i.p.v. miljoenen kleuren, betere weergave van subtiele
gradatieverschillen en hogere contrastverhouding)
• Dolby TrueHD & DTS HD Master Audio (hoge kwaliteit audio ondersteuning)
• Lip-Sync (voorkomt synchronisatie problemen tussen beeld en geluid )
• CEC (meerdere ‘CEC’ apparaten bedienen met één afstandsbediening).
INSTALLATIE
1. S
luit de HDMI kabel naar uw scherm (TV, monitor of projector) aan op de “HDMI output”
van de Connect310.
2. Sluit de HDMI kabels van uw bronnen aan op de “HDMI inputs” van de Connect310.
3. Sluit de externe Infraroodontvanger aan op de “IR Extender” aansluiting van de
Connect310 en monteer hem ergens in het zicht van uw afstandsbediening. Bijvoorbeeld
op, onder of aan de zijkant van uw A/V meubel. Hierdoor kunt u de Connect310 blijven
bedienen, ook wanneer deze in een afgesloten kast ligt.
4. Sluit de voedingsadapter aan op voedingsaansluiting van de Connect310 en steek de
stekker in het stopcontact.
Opmerking 1:
In de meeste gevallen werkt de Connect310 ook zonder voedingsadapter. Standaard zijn alle
HDMI kabels voorzien van een 5V voedingspin, maar helaas ondersteunen niet alle HDMI
bronnen deze functionaliteit. Het is dus afhankelijk van uw HDMI bronnen of het aansluiten
van de voedingsadapter op de Connect310 noodzakelijk is. U kunt dit eenvoudig testen door
de voedingsadapter los te koppelen van de Connect310 en te proberen of deze naar behoren
blijft functioneren.
Opmerking 2:
Gebruik uitsluitend categorie 2 HDMI gecertificeerde kabels voor de beste beeld- en
geluidskwaliteit.
34
© MARMITEK
Batterij
Trek het plastic stripje uit het batterijvakje om de batterij actief te maken en de
afstandsbediening te kunnen gebruiken.
GEBRUIK
Schakelen tussen de aangesloten HDMI bronnen
Automatisch
Wanneer één van de HDMI bronnen ingeschakeld wordt zal de Connect310 automatisch
naar het juiste ingangskanaal schakelen. Indien meerdere HDMI bronnen al ingeschakeld zijn
zal de Connect310 automatisch naar de laatst actief geworden HDMI bron schakelen.
­
Opmerking:
Automatisch schakelen moet wel ondersteund worden door de HDMI bron.
Met de selectieknop op de switcher
Met de Select knop op de bovenkant van het paneel kan handmatig tussen de diverse HDMI
bronnen geschakeld worden.
Met de afstandsbediening
Richt de afstandsbediening op de externe Infraroodontvanger van de Connect310 en druk op
het cijfer dat overeenkomt met de gewenste HDMI bron.
De LED verlichting op de bovenkant van het paneel geeft aan welke bron geselecteerd is.
VEEL GESTELDE VRAGEN
• C
ontroleer of de voedingsadapter van de Connect310 is aangesloten en in het stopcontact
zit.
• Gebruik HDMI gecertificeerde kabels van de hoogste kwaliteit (categorie 2 HDMI
gecertificeerd)
• Gebruik geen HDMI kabels die langer zijn dan gespecificeerd in de technische gegevens
• Zowel de HDMI bron als uw scherm dient HDMI volledig te ondersteunen
CONNECT 310™
35
NEDERLANDS
Geen (of slecht) beeld en geluid
Indien u slecht of geen beeld ervaart na het aansluiten van de HDMI switcher, probeer dan
het probleem te achterhalen door de apparaten één voor één aan te sluiten op uw scherm
(TV, monitor of projector). Op deze manier kunt u bepalen of het probleem zich bevindt
in de HDMI bronnen, de HDMI kabels, de HDMI switcher of het scherm. HDMI apparaten
die niet door ATC (Authorized Test Centers) getest en gecertificeerd zijn kunnen beeld en
geluidsproblemen veroorzaken.
• C
ontroleer of uw HDMI bronnen, DVI apparaat en scherm de kopieerbeveiliging HDCP
(High-bandwidth Digital Content Protection) ondersteunen.
Afstandsbediening werk niet
• U dient de afstandsbediening op de externe infraroodontvanger te richten, niet op de
switcher.
• Infraroodsignalen hebben een maximaal bereik van ongeveer 10 meter. Test op kortere
afstand.
• Vervang de batterij in de afstandsbediening, deze kan leeg zijn.
Heeft u vragen die hierboven niet beantwoord worden? Kijk dan op www.marmitek.com
TECHNISCHE GEGEVENS
Resolutie
Ondersteunde HDTV Resoluties
480p, 576i, 576p, 720p, 1080i, 1080p
Ondersteunde PC Resolutie (max) 1920 x 1200
Maximale Pixel Frequency (max) 225 MHz
Maximale Bit Rate (max) 2.25 Gbps
In- en uitgangen
HDMI Ingang (19-pin female)
3 HDMI
HDMI Uitgang (19-pin female)
1 HDMI
Maximale HDMI kabel lengte
15 meter
Afstandsbediening
Infrarood afstandsbediening
Inclusief batterij CR2025
Behuizing Switcher
Afmeting (H x B x D)
80 x 18 x 58mm
Gewicht
250 g
Omgeving
Omgevingstemperatuur +0 to +40° C
Omgevingsvochtigheid 10% to 85%
Voeding
Externe voedingsadapter
Input: 100-240VAC @50-60Hz
Output: 5VDC @ 300mA
Specificaties kunnen wijzigen zonder voorafgaande melding hiervan.
36
© MARMITEK
EXTRA VERKRIJGBAAR
Infrarood verlenging
Marmitek biedt een verscheidenheid aan producten aan die het u mogelijk maakt uw
apparatuur ook te bedienen wanneer deze zich in een gesloten kast of zelfs in een andere
kamer bevindt. Dit kan met of zonder kabels. Meer informatie over deze zogenoemde
infraroodverlengers vindt u op www.marmitek.com.
Extra afstandsbediening
Wanneer u uw apparatuur graag vanuit verschillende plekken in huis wilt bedienen, of
wanneer u slechts één enkele afstandsbediening wilt gebruiken voor al uw A/V apparaten,
maak dan uw keuze uit de complete serie universele afstandsbedieningen van Marmitek;
EasyControl of EasyTouch. Deze vervangen bijna alle afstandsbedieningen die u nu gebruikt.
Meer informatie over deze zogenoemde universele afstandsbedieningen vindt u op www.
marmitek.com.
Milieu-informatie voor klanten in de Europese Unie
De Europese Richtlijn 2002/96/EC schrijft voor dat apparatuur die is voorzien van dit symbool op het product
of de verpakking, niet mag worden ingezameld met niet-gescheiden huishoudelijk afval. Dit symbool geeft aan
dat het product apart moet worden ingezameld. U bent zelf verantwoordelijk voor de vernietiging van deze en
andere elektrische en elektronische apparatuur via de daarvoor door de landelijke of plaatselijke overheid aangewezen
inzamelingskanalen. De juiste vernietiging en recycling van deze apparatuur voorkomt mogelijke negatieve gevolgen voor
het milieu en de gezondheid. Voor meer informatie over het vernietigen van uw oude apparatuur neemt u contact op met
NEDERLANDS
de plaatselijke autoriteiten of afvalverwerkingsdienst, of met de winkel waar u het product hebt aangeschaft.
CONNECT 310™
37
DECLARATION OF CONFORMITY
Hereby, Marmitek BV, declares that this Connect310 is in compliance with the essential requirements and other relevant
provisions of the following Directives:
DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the
approximation of the laws of the Member States relating to electromagnetic compatibility
Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the
harmonisation of the laws of Member States relating to electrical equipment designed for use within certain
voltage limits
Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of
the use of certain hazardous substances in electrical and electronic equipment
Hiermit erklärt Marmitek BV die Übereinstimmung des Gerätes Connect310 den grundlegenden Anforderungen und
den anderen relevanten Festlegungen der Richtliniën:
RICHTLINIE 2004/108/EG DES EUROPÄISCHEN PARLAMENTS UND DES RATES vom 15. Dezember 2004 zur
Angleichung der Rechtsvorschriften der Mitgliedstaaten über die elektromagnetische Verträglichkeit
Richtlinie 2006/95/EG des Europäischen Parlaments und des Rates vom 12. Dezember 2006 zur Angleichung
der Rechtsvorschriften der Mitgliedstaaten betreffend elektrische Betriebsmittel zur Verwendung innerhalb
bestimmter Spannungsgrenzen
Richtlinie 2002/95/EG des Europäischen Parlaments und des Rates vom 27. Januar 2003 zur Beschränkung
der Verwendung bestimmter gefährlicher Stoffe in Elektro- und Elektronikgeräten
Par la présente Marmitek BV déclare que l’appareil Connect310 est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directives:
DIRECTIVE 2004/108/CE DU PARLEMENT EUROPÉEN ET DU CONSEIL du 15 décembre 2004 relative au
rapprochement des législations des États membres concernant la compatibilité électromagnétique
Directive 2006/95/CE du Parlement européen et du Conseil du 12 décembre 2006 concernant le rapprochement
des législations des États membres relatives au matériel électrique destiné à être employé dans certaines
limites de tension
Directive 2002/95/CE du Parlement européen et du Conseil du 27 janvier 2003 relative à la limitation de
l’utilisation de certaines substances dangereuses dans les équipements électriques et électroniques
Copyrights
Marmitek is a trademark of Marmidenko B.V. Connect310 is a trademark of Marmitek B.V.
Home Networks is a registered trademark of Marmitek B.V.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
PlayStation is a trademark of Sony Computer Entertainment Inc.
Xbox is a trademark of the Microsoft Corporation. All rights reserved.
Copyright and all other proprietary rights in the content (including but not limited to model numbers, software, audio,
video, text and photographs) rests with Marmitek B.V. Any use of the Content, but without limitation, distribution,
reproduction, modification, display or transmission without the prior written consent of Marmitek is strictly prohibited.
All copyright and other proprietary notices shall be retained on all reproductions.
38
© MARMITEK
DECLARATION OF CONFORMITY
Marmitek BV declara que este Connect310 cumple con las exigencias esenciales y con las demás reglas relevantes de
la directriz:
DIRECTIVA 2004/108/CE DEL PARLAMENTO EUROPEO Y DEL CONSEJO de 15 de diciembre de 2004 relativa a la
aproximación de las legislaciones de los Estados miembros en materia de compatibilidad electromagnética
Directiva 2006/95/CE del Parlamento Europeo y del Consejo de 12 de diciembre de 2006 relativa a la
aproximación de las legislaciones de los Estados miembros sobre el material eléctrico destinado a utilizarse
con determinados límites de tensión
Directiva 2002/95/CE del Parlamento Europeo y del Consejo de 27 de enero de 2003 sobre restricciones a la
utilización de determinadas sustancias peligrosas en aparatos eléctricos y electrónicos
Con ciò, Marmitek BV, dichiara che il Connect310 è conforme ai requisiti essenziali ed alter disposizioni relative alla
Direttiva:
DIRETTIVA 2004/108/CE DEL PARLAMENTO EUROPEO E DEL CONSIGLIO del 15 dicembre 2004 concernente il
ravvicinamento delle legislazioni degli Stati membri relative alla compatibilità elettromagnetica
Direttiva 2006/95/CE del Parlamento europeo e del Consiglio del 12 dicembre 2006 concernente il
ravvicinamento delle legislazioni degli Stati membri relative al materiale elettrico destinato ad essere
adoperato entro taluni limiti di tensione
Direttiva 2002/95/CE del Parlamento europeo e del Consiglio del 27 gennaio 2003 sulla restrizione dell’uso
di determinate sostanze pericolose nelle apparecchiature elettriche ed elettroniche
Bij deze verklaart Marmitek BV, dat deze Connect310 voldoet aan de essentiële eisen en aan de overige relevante
bepalingen van Richtlijnen:
RICHTLIJN 2004/108/EG VAN HET EUROPEES PARLEMENT EN DE RAAD van 15 december 2004 betreffende de
onderlinge aanpassing van de wetgevingen van de lidstaten inzake elektromagnetische compatibiliteit
Richtlijn 2006/95/EG van het Europees Parlement en de Raad van 12 december 2006 betreffende de
onderlinge aanpassing van de wettelijke voorschriften der lidstaten inzake elektrisch materiaal bestemd
voor gebruik binnen bepaalde spanningsgrenzen
Richtlijn 2002/95/EG van het Europees Parlement en de Raad van 27 januari 2003 betreffende beperking van
het gebruik van bepaalde gevaarlijke stoffen in elektrische en elektronische apparatuur
MARMITEK BV - P.O. BOX 4257 - 5604 EG EINDHOVEN – THE NETHERLANDS
CONNECT 310™
39

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement